ES-1000-MIB

File: ES-1000-MIB.mib (56617 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
SNMPv2-TC

Imported symbols

enterprises Counter OBJECT-TYPE
TRAP-TYPE DisplayString

Defined Types

TruthValue  
INTEGER yes(1), no(2)    

Es1000SysOperStatus  
INTEGER operational(1), redundant-failure(2), minor-failure(3), major-failure(4), not-operational(5)    

Es1000SysState  
INTEGER online(1), coming-online(2), offline(3), going-offline(4)    

Es1000CompCode  
INTEGER comp-ctp(2), comp-fan(5), comp-power(6), comp-thermal(13), comp-gbic-none(16), comp-gbic-cu-db9(17), comp-gbic-cu-hssdc(18), comp-gbic-opt-lw-1g(19), comp-gbic-serial-id(20), comp-gbic-opt-sw-1g(21), comp-gbic-opt-lw-2g(22), comp-gbic-opt-sw-2g(23)    

Es1000CompPosition  
INTEGER 1..9    

Es1000CompStatus  
INTEGER active(1), update-busy(2), failed(3)    

Es1000PortCount  
INTEGER 1..9    

Es1000PortIndex  
INTEGER 1..9    

Es1000PortNumber  
INTEGER 0..8    

Es1000PortPhyState  
INTEGER psNotInstalled(1), psAvailable(2), psBlocked(3), psUnavailable(4), psLinkFailure(5), psLinkFailLOL(6), psIntDiags(7), psExtLoop(8), psPortFail(9), psSR(10), psLR(11), psPortBypassedLipF7(12), psPortBypassedLipF8(13), psPortBypassedOSError(14), psPortBypassedCRCError(15), psLinkFailLOSync(16), psLinkFailLOSignal(17), psTxFault(18), psTimeout(19), psProtocolError(20), psRxOLS(21), psRxNOS(22), psRxLR(23), psBBCredit(24), psFatalError(25)    

Es1000PortStatus  
INTEGER online(1), offline(2), testing(3), faulty(4)    

Es1000PortAdmStatus  
INTEGER online(1), offline(2), testing(3)    

Es1000LoopStatus  
INTEGER loop-DOWN(1), loop-LIP(2), loop-LISM(3), loop-LIFA(4), loop-LIPA(5), loop-LIHA(6), loop-LISA(7), loop-LIRP(8), loop-LILP(9), loop-FAN(10), loop-ACTIVE(11), loop-READY(12)    

Es1000LoopMasterWWN  
OCTET STRING Size(8)    

Es1000LoopPortALPA  
OCTET STRING Size(0..126)    

Es1000CompEntry  
SEQUENCE    
  es1000CompCode Es1000CompCode
  es1000CompPosition Es1000CompPosition
  es1000CompStatus Es1000CompStatus

Es1000PortBportEntry  
SEQUENCE    
  es1000PortBportIndex Es1000PortIndex
  es1000PortBportNumber Es1000PortNumber
  es1000PortBportPhyState Es1000PortPhyState
  es1000PortBportOpStatus Es1000PortStatus
  es1000PortBportAdmStatus Es1000PortAdmStatus
  es1000PortBportName DisplayString
  es1000PortBportBlockedState TruthValue

Es1000PortHportEntry  
SEQUENCE    
  es1000PortHportIndex Es1000PortIndex
  es1000PortHportNumber Es1000PortNumber
  es1000PortHportPhyState Es1000PortPhyState
  es1000PortHportOpStatus Es1000PortStatus
  es1000PortHportAdmStatus Es1000PortAdmStatus
  es1000PortHportName DisplayString
  es1000PortHportBypassedState TruthValue
  es1000PortHportValidation TruthValue
  es1000PortHportLipOnInsertion TruthValue

Es1000LoopPortEntry  
SEQUENCE    
  es1000LoopPortIndex Es1000PortIndex
  es1000LoopPortNumber Es1000PortNumber
  es1000LoopPortALPA Es1000LoopPortALPA

Es1000AcctBportEntry  
SEQUENCE    
  es1000AcctBportIndex Es1000PortIndex
  es1000AcctBportNumber Es1000PortNumber
  es1000AcctBportLinkFailures Counter
  es1000AcctBportSyncLosses Counter
  es1000AcctBportSigLosses Counter
  es1000AcctBportPrimSeqProtoErrors Counter
  es1000AcctBportInvalidTxWords Counter
  es1000AcctBportInvalidCrcs Counter
  es1000AcctBportLinkResetIns Counter
  es1000AcctBportLinkResetOuts Counter
  es1000AcctBportOlsIns Counter
  es1000AcctBportOlsOuts Counter
  es1000AcctBportC2InFrames Counter
  es1000AcctBportC2OutFrames Counter
  es1000AcctBportC2Discards Counter
  es1000AcctBportC2InOctets Counter
  es1000AcctBportC2OutOctets Counter
  es1000AcctBportC3InFrames Counter
  es1000AcctBportC3OutFrames Counter
  es1000AcctBportC3InOctets Counter
  es1000AcctBportC3OutOctets Counter
  es1000AcctBportC3Discards Counter
  es1000AcctBportRxWords Counter
  es1000AcctBportTxWords Counter
  es1000AcctBportRxFrames Counter
  es1000AcctBportTxFrames Counter
  es1000AcctBportInvalidOrderedSets Counter
  es1000AcctBportFramesTooLong Counter
  es1000AcctBportFramesTooShort Counter
  es1000AcctBportTxThroughput Counter
  es1000AcctBportRxThroughput Counter
  es1000AcctBportAddressErrors Counter
  es1000AcctBportC2FbsyFrames Counter
  es1000AcctBportC2FrjtFrames Counter
  es1000AcctBportCFInFrames Counter
  es1000AcctBportFramesDiscarded Counter
  es1000AcctBportInvalidClassofFrame Counter
  es1000AcctBportC2RxWords Counter
  es1000AcctBportC2TxWords Counter
  es1000AcctBportC3RxWords Counter
  es1000AcctBportC3TxWords Counter
  es1000AcctBportTxThroughputPercent Counter
  es1000AcctBportRxThroughputPercent Counter
  es1000AcctBportLinkDown Counter

Es1000AcctHportEntry  
SEQUENCE    
  es1000AcctHportIndex Es1000PortIndex
  es1000AcctHportNumber Es1000PortNumber
  es1000AcctHportLinkFailures Counter
  es1000AcctHportSyncLosses Counter
  es1000AcctHportSigLosses Counter
  es1000AcctHportInvalidTxWords Counter
  es1000AcctHportInvalidCrcs Counter
  es1000AcctHportC2InFrames Counter
  es1000AcctHportC2OutFrames Counter
  es1000AcctHportC2InOctets Counter
  es1000AcctHportC2OutOctets Counter
  es1000AcctHportC3InFrames Counter
  es1000AcctHportC3OutFrames Counter
  es1000AcctHportC3InOctets Counter
  es1000AcctHportC3OutOctets Counter
  es1000AcctHportRxWords Counter
  es1000AcctHportTxWords Counter
  es1000AcctHportRxFrames Counter
  es1000AcctHportTxFrames Counter
  es1000AcctHportTxThroughput Counter
  es1000AcctHportRxThroughput Counter
  es1000AcctHportC2RxWords Counter
  es1000AcctHportC2TxWords Counter
  es1000AcctHportC3RxWords Counter
  es1000AcctHportC3TxWords Counter
  es1000AcctHportTxThroughputPercent Counter
  es1000AcctHportRxThroughputPercent Counter
  es1000AcctHportLIPCount Counter
  es1000AcctHportConnectionsMade Counter
  es1000AcctHportConnectionsStalled Counter
  es1000AcctHportConnectionsAborted Counter
  es1000AcctHportConnectionsAccepted Counter

Defined Values

mcData 1.3.6.1.4.1.289
OBJECT IDENTIFIER    

commDev 1.3.6.1.4.1.289.2
OBJECT IDENTIFIER    

fibreChannel 1.3.6.1.4.1.289.2.1
OBJECT IDENTIFIER    

fcSwitch 1.3.6.1.4.1.289.2.1.1
OBJECT IDENTIFIER    

es-1000 1.3.6.1.4.1.289.2.1.1.3
OBJECT IDENTIFIER    

es1000Sys 1.3.6.1.4.1.289.2.1.1.3.1
OBJECT IDENTIFIER    

es1000Comp 1.3.6.1.4.1.289.2.1.1.3.2
OBJECT IDENTIFIER    

es1000Port 1.3.6.1.4.1.289.2.1.1.3.3
OBJECT IDENTIFIER    

es1000Loop 1.3.6.1.4.1.289.2.1.1.3.4
OBJECT IDENTIFIER    

es1000Acct 1.3.6.1.4.1.289.2.1.1.3.5
OBJECT IDENTIFIER    

es1000SysCurrentDate 1.3.6.1.4.1.289.2.1.1.3.1.1
The current date information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysBootDate 1.3.6.1.4.1.289.2.1.1.3.1.2
The date and time of the last IPL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysFirmwareVersion 1.3.6.1.4.1.289.2.1.1.3.1.3
The current version of the firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysTypeNum 1.3.6.1.4.1.289.2.1.1.3.1.4
This object identifies ASCII type number for the unit (ex. 001000).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysModelNum 1.3.6.1.4.1.289.2.1.1.3.1.5
This object identifies ASCII model number for the unit (ex. 001).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysMfg 1.3.6.1.4.1.289.2.1.1.3.1.6
This object identifies ASCII manufacturer for the unit (ex. MCD).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysPlantOfMfg 1.3.6.1.4.1.289.2.1.1.3.1.7
This object identifies ASCII plant of manufacturer for the unit (ex. 01).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysSeqNum 1.3.6.1.4.1.289.2.1.1.3.1.8
This object identifies ASCII sequence number for the unit (ex. 000000000001).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysEcLevel 1.3.6.1.4.1.289.2.1.1.3.1.9
This object identifies ASCII EC level ID for the unit (format: xyymmdd, x=millennium).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysOemSerialNum 1.3.6.1.4.1.289.2.1.1.3.1.10
This object identifies ASCII OEM serial number for the unit (format: xyymmdd, x=millennium).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

es1000SysOperStatus 1.3.6.1.4.1.289.2.1.1.3.1.11
The current operational status of the switch. The values are defined as follows: operational(1), redundant-failure(2), minor-failure(3), major-failure(4), and not-operational(5).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000SysOperStatus  

es1000SysState 1.3.6.1.4.1.289.2.1.1.3.1.12
If the edOperStatus of the switch is operational, the switch will be in one of the four states: online(1), coming-online(2), offline(3), and going-offline(4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000SysState  

es1000SysAdmStatus 1.3.6.1.4.1.289.2.1.1.3.1.13
The desired administrative status of the switch. A management station may place the switch in a desired state by setting this object accordingly. The desired administrative status are online(1) and offline(2). Online means setting the switch to be accessible by an external Fibre Channel port, and offline means setting the switch to be inaccessible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

es1000CompTable 1.3.6.1.4.1.289.2.1.1.3.2.1
A table that contains one entry for each component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000CompEntry

es1000CompEntry 1.3.6.1.4.1.289.2.1.1.3.2.1.1
An entry containing the service parameters of the component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000CompEntry  

es1000CompCode 1.3.6.1.4.1.289.2.1.1.3.2.1.1.1
Component. A hardware unit of the product. Each component defined in this MIB has a fixed COMPONENT code, except for port components which vary based on the installed GBIC. The values are defined as follows: comp-ctp(2), comp-fan(5), comp-power(6), comp-thermal(13), comp-gbic-none(16), comp-gbic-cu-db9(17), comp-gbic-cu-hssdc(18), comp-gbic-opt-lw-1g(19), comp-gbic-serial(20), comp-gbic-opt-sw-1g(21), comp-gbic-opt-lw-2g(22), comp-gbic-opt-sw-2g(23)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000CompCode  

es1000CompPosition 1.3.6.1.4.1.289.2.1.1.3.2.1.1.2
This object identifies the position of the component. CTP components start from 1 to 1, fans from 1 to 6, power supplies from 1 to 2, thermal sensors from 1 to 1, port GBICs from 1 to 9.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000CompPosition  

es1000CompStatus 1.3.6.1.4.1.289.2.1.1.3.2.1.1.3
This object identifies the operational status of the component. The active(1) state indicates that the current component is active. The update-busy(2) state indicates that the component is in the updating process. The failed(3) state indicates the current component is failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000CompStatus  

es1000PortBportCount 1.3.6.1.4.1.289.2.1.1.3.3.1
The number of physical B_Ports available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortCount  

es1000PortHportCount 1.3.6.1.4.1.289.2.1.1.3.3.2
The number of physical H_Ports available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortCount  

es1000PortBportTable 1.3.6.1.4.1.289.2.1.1.3.3.3
A table that contains one entry for each B_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000PortBportEntry

es1000PortBportEntry 1.3.6.1.4.1.289.2.1.1.3.3.3.1
An entry containing the information for the B_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000PortBportEntry  

es1000PortBportIndex 1.3.6.1.4.1.289.2.1.1.3.3.3.1.1
This object identifies the B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortIndex  

es1000PortBportNumber 1.3.6.1.4.1.289.2.1.1.3.3.3.1.2
This object identifies the B_Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortNumber  

es1000PortBportPhyState 1.3.6.1.4.1.289.2.1.1.3.3.3.1.3
This object identifies the physical state of the B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortPhyState  

es1000PortBportOpStatus 1.3.6.1.4.1.289.2.1.1.3.3.3.1.4
This object identifies the operational status of the B_Port. The online(1) state indicates that user frames can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortStatus  

es1000PortBportAdmStatus 1.3.6.1.4.1.289.2.1.1.3.3.3.1.5
The desired state of the B_Port. A management station may place the B_Port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the B_Port, the es1000PortBportAdmStatus is changed to either the online(1) or testing(3) states, or remains in the offline(2) state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Es1000PortAdmStatus  

es1000PortBportName 1.3.6.1.4.1.289.2.1.1.3.3.3.1.6
The desired name of the B_Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

es1000PortBportBlockedState 1.3.6.1.4.1.289.2.1.1.3.3.3.1.7
The desired blocked state of the B_Port. Blocking a B_Port prevents it from communicating with its attached E_Port. A blocked B_Port will continuously transmit the Off-Line Sequence (OLS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

es1000PortHportTable 1.3.6.1.4.1.289.2.1.1.3.3.4
A table that contains one entry for each H_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000PortHportEntry

es1000PortHportEntry 1.3.6.1.4.1.289.2.1.1.3.3.4.1
An entry containing the information for the H_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000PortHportEntry  

es1000PortHportIndex 1.3.6.1.4.1.289.2.1.1.3.3.4.1.1
This object identifies the H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortIndex  

es1000PortHportNumber 1.3.6.1.4.1.289.2.1.1.3.3.4.1.2
This object identifies the H_Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortNumber  

es1000PortHportPhyState 1.3.6.1.4.1.289.2.1.1.3.3.4.1.3
This object identifies the physical state of the H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortPhyState  

es1000PortHportOpStatus 1.3.6.1.4.1.289.2.1.1.3.3.4.1.4
This object identifies the operational status of the H_Port. The online(1) state indicates that user frames can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortStatus  

es1000PortHportAdmStatus 1.3.6.1.4.1.289.2.1.1.3.3.4.1.5
The desired state of the H_Port. A management station may place the H_Port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, the es1000PortHportAdmStatus is changed to either the online(1) or testing(3) states, or remains in the offline(2) state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Es1000PortAdmStatus  

es1000PortHportName 1.3.6.1.4.1.289.2.1.1.3.3.4.1.6
The desired name of the H_Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

es1000PortHportBypassedState 1.3.6.1.4.1.289.2.1.1.3.3.4.1.7
The desired bypassed state of the H_Port. Bypassing an H_Port prevents an attached device from communicating with the switch or communicating with any other device attached to the switch. Bypassing a port causes the incoming signal from an attached device to not placed on the Loop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

es1000PortHportValidation 1.3.6.1.4.1.289.2.1.1.3.3.4.1.8
The desired port validation state of the H_Port. If enabled, then a more rigorous process of validating the attached device is performed before insertion into the Loop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

es1000PortHportLipOnInsertion 1.3.6.1.4.1.289.2.1.1.3.3.4.1.9
The desired LIP on Insertion state of the H_Port. If enabled, a LIP will be automatically sent after any port insertion, port bypass, or manual GBIC installation or removal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

es1000LoopStatus 1.3.6.1.4.1.289.2.1.1.3.4.1
The current loop status of the switch. The values are defined as follows: DOWN(1), LIP(2), LISM(3), LIFA(4), LIPA(5), LIHA(6), LISA(7), LIRP(8), LILP(9), FAN(10), ACTIVE(11), and READY(12).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000LoopStatus  

es1000LoopMasterWWN 1.3.6.1.4.1.289.2.1.1.3.4.2
The loop master worldwide name. If the loop master is unknown, then the worldwide name will be all zeros.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000LoopMasterWWN  

es1000LoopSwitched 1.3.6.1.4.1.289.2.1.1.3.4.3
Indicates whether switching mode is enabled. If enabled, each pair of communicating H_Ports may share the 100 Mbyte bandwidth. If not enabled, all devices on the loop share the 100 Mbyte bandwidth available on the loop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

es1000LoopPrincipal 1.3.6.1.4.1.289.2.1.1.3.4.4
Indicates whether the switch is operating as the principal ES-1000 on the loop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

es1000LoopPortTable 1.3.6.1.4.1.289.2.1.1.3.4.5
A table that contains the port-to-ALPA mapping for each H_Port on the loop.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000LoopPortEntry

es1000LoopPortEntry 1.3.6.1.4.1.289.2.1.1.3.4.5.1
An entry containing the ALPA information for the H_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000LoopPortEntry  

es1000LoopPortIndex 1.3.6.1.4.1.289.2.1.1.3.4.5.1.1
This object identifies the Loop port entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortIndex  

es1000LoopPortNumber 1.3.6.1.4.1.289.2.1.1.3.4.5.1.2
This object identifies the H_Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortNumber  

es1000LoopPortALPA 1.3.6.1.4.1.289.2.1.1.3.4.5.1.3
This object identifies the ALPA's associated with the H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000LoopPortALPA  

es1000AcctBportTable 1.3.6.1.4.1.289.2.1.1.3.5.1
A table that contains B_Port accounting information recorded since the switch IPL'd.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000AcctBportEntry

es1000AcctBportEntry 1.3.6.1.4.1.289.2.1.1.3.5.1.1
An entry containing accounting information for each B_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000AcctBportEntry  

es1000AcctBportIndex 1.3.6.1.4.1.289.2.1.1.3.5.1.1.1
This object identifies the B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortIndex  

es1000AcctBportNumber 1.3.6.1.4.1.289.2.1.1.3.5.1.1.2
This object identifies the B_Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortNumber  

es1000AcctBportLinkFailures 1.3.6.1.4.1.289.2.1.1.3.5.1.1.3
This object counts the number of Link Failures detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportSyncLosses 1.3.6.1.4.1.289.2.1.1.3.5.1.1.4
This object counts the number of loss of synchronization detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportSigLosses 1.3.6.1.4.1.289.2.1.1.3.5.1.1.5
This object counts the number of loss of signal detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportPrimSeqProtoErrors 1.3.6.1.4.1.289.2.1.1.3.5.1.1.6
This object counts the number of primitive sequence protocol errors detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportInvalidTxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.7
This object counts the number of invalid transmission words detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportInvalidCrcs 1.3.6.1.4.1.289.2.1.1.3.5.1.1.8
This object counts the number of invalid CRC detected by this B_Port for frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportLinkResetIns 1.3.6.1.4.1.289.2.1.1.3.5.1.1.9
This object counts the number of Link Reset Protocol received by this B_Port from the attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportLinkResetOuts 1.3.6.1.4.1.289.2.1.1.3.5.1.1.10
This object counts the number of Link Reset Protocol issued by this B_Port to the attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportOlsIns 1.3.6.1.4.1.289.2.1.1.3.5.1.1.11
This object counts the number of Offline Sequence (OLS) received by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportOlsOuts 1.3.6.1.4.1.289.2.1.1.3.5.1.1.12
This object counts the number of Offline Sequence (OLS) issued by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2InFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.13
This object counts the number of Class 2 frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2OutFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.14
This object counts the number of Class 2 frames delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2Discards 1.3.6.1.4.1.289.2.1.1.3.5.1.1.15
This object counts the number of Class 2 frames discarded by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2InOctets 1.3.6.1.4.1.289.2.1.1.3.5.1.1.16
This object counts the number of Class 2 frame octets (bytes), including the frame delimeters, received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2OutOctets 1.3.6.1.4.1.289.2.1.1.3.5.1.1.17
This object counts the number of Class 2 frame octets (bytes), including the frame delimeters, delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3InFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.18
This object counts the number of Class 3 frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3OutFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.19
This object counts the number of Class 3 frames delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3InOctets 1.3.6.1.4.1.289.2.1.1.3.5.1.1.20
This object counts the number of Class 3 frame octets (bytes), including the frame delimeters, received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3OutOctets 1.3.6.1.4.1.289.2.1.1.3.5.1.1.21
This object counts the number of Class 3 frame octets (bytes), including the frame delimeters, delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3Discards 1.3.6.1.4.1.289.2.1.1.3.5.1.1.22
This object counts the number of Class 3 frames discarded by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportRxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.23
This object counts the number of Fibre Channel words, including the frame delimeters, received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportTxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.24
This object counts the number of Fibre Channel words, including the frame delimeters, delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportRxFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.25
This object counts the number of Fibre Channel frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportTxFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.26
This object counts the number of Fibre Channel frames delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportInvalidOrderedSets 1.3.6.1.4.1.289.2.1.1.3.5.1.1.27
This object counts the number of invalid Ordered Sets received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportFramesTooLong 1.3.6.1.4.1.289.2.1.1.3.5.1.1.28
This object counts the number of Fibre Channel over length frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportFramesTooShort 1.3.6.1.4.1.289.2.1.1.3.5.1.1.29
This object counts the number of Fibre Channel truncated frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportTxThroughput 1.3.6.1.4.1.289.2.1.1.3.5.1.1.30
This object presents the Bps transmission rate for this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportRxThroughput 1.3.6.1.4.1.289.2.1.1.3.5.1.1.31
This object presents the Bps reception rate for this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportAddressErrors 1.3.6.1.4.1.289.2.1.1.3.5.1.1.32
This object counts the number of Address errors detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2FbsyFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.33
This object counts the number of F_BSY frames generated by this B_Port against Class 2 frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2FrjtFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.34
This object counts the number of F_RJT frames generated by this B_Port against Class 2 frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportCFInFrames 1.3.6.1.4.1.289.2.1.1.3.5.1.1.35
This object counts the number of Class F frames received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportFramesDiscarded 1.3.6.1.4.1.289.2.1.1.3.5.1.1.36
This object counts the number of Fibre Channel frames that this B_Port has discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportInvalidClassofFrame 1.3.6.1.4.1.289.2.1.1.3.5.1.1.37
This object counts the number of Invalid Class of frame detected by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2RxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.38
This object counts the number of Class 2 frame words, including the frame delimeters, received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC2TxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.39
This object counts the number of Class 2 words, including the frame delimeters, delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3RxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.40
This object counts the number of Class 3 frame words, including the frame delimeters, received by this B_Port from its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportC3TxWords 1.3.6.1.4.1.289.2.1.1.3.5.1.1.41
This object counts the number of Class 3 words, including the frame delimeters, delivered through this B_Port to its attached E_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportTxThroughputPercent 1.3.6.1.4.1.289.2.1.1.3.5.1.1.42
This object presents the percentage of transmission bandwidth used by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportRxThroughputPercent 1.3.6.1.4.1.289.2.1.1.3.5.1.1.43
This object presents the percentage of reception bandwidth used by this B_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctBportLinkDown 1.3.6.1.4.1.289.2.1.1.3.5.1.1.44
This object counts the number of times the B_Port has detected a link down condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportTable 1.3.6.1.4.1.289.2.1.1.3.5.2
A table that contains H_Port accounting information recorded since the switch IPL'd.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es1000AcctHportEntry

es1000AcctHportEntry 1.3.6.1.4.1.289.2.1.1.3.5.2.1
An entry containing accounting information for each H_Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es1000AcctHportEntry  

es1000AcctHportIndex 1.3.6.1.4.1.289.2.1.1.3.5.2.1.1
This object identifies the H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortIndex  

es1000AcctHportNumber 1.3.6.1.4.1.289.2.1.1.3.5.2.1.2
This object identifies the H_Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Es1000PortNumber  

es1000AcctHportLinkFailures 1.3.6.1.4.1.289.2.1.1.3.5.2.1.3
This object counts the number of Link Failures detected by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportSyncLosses 1.3.6.1.4.1.289.2.1.1.3.5.2.1.4
This object counts the number of loss of synchronization detected by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportSigLosses 1.3.6.1.4.1.289.2.1.1.3.5.2.1.5
This object counts the number of loss of signal detected by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportInvalidTxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.6
This object counts the number of invalid transmission words detected by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportInvalidCrcs 1.3.6.1.4.1.289.2.1.1.3.5.2.1.7
This object counts the number of invalid CRC detected by this H_Port for frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2InFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.8
This object counts the number of Class 2 frames received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2OutFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.9
This object counts the number of Class 2 frames delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2InOctets 1.3.6.1.4.1.289.2.1.1.3.5.2.1.10
This object counts the number of Class 2 frame octets (bytes), including the frame delimeters, received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2OutOctets 1.3.6.1.4.1.289.2.1.1.3.5.2.1.11
This object counts the number of Class 2 frame octets (bytes), including the frame delimeters, delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3InFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.12
This object counts the number of Class 3 frames received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3OutFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.13
This object counts the number of Class 3 frames delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3InOctets 1.3.6.1.4.1.289.2.1.1.3.5.2.1.14
This object counts the number of Class 3 frame octets (bytes), including the frame delimeters, received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3OutOctets 1.3.6.1.4.1.289.2.1.1.3.5.2.1.15
This object counts the number of Class 3 frame octets (bytes), including the frame delimeters, delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportRxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.16
This object counts the number of Fibre Channel words, including the frame delimeters, received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportTxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.17
This object counts the number of Fibre Channel words, including the frame delimeters, delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportRxFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.18
This object counts the number of Fibre Channel frames received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportTxFrames 1.3.6.1.4.1.289.2.1.1.3.5.2.1.19
This object counts the number of Fibre Channel frames delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportTxThroughput 1.3.6.1.4.1.289.2.1.1.3.5.2.1.20
This object presents the Bps transmission rate for this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportRxThroughput 1.3.6.1.4.1.289.2.1.1.3.5.2.1.21
This object presents the Bps reception rate for this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2RxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.22
This object counts the number of Class 2 frame words, including the frame delimeters, received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC2TxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.23
This object counts the number of Class 2 words, including the frame delimeters, delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3RxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.24
This object counts the number of Class 3 frame words, including the frame delimeters, received by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportC3TxWords 1.3.6.1.4.1.289.2.1.1.3.5.2.1.25
This object counts the number of Class 3 words, including the frame delimeters, delivered through this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportTxThroughputPercent 1.3.6.1.4.1.289.2.1.1.3.5.2.1.26
This object presents the percentage of transmission bandwidth used by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportRxThroughputPercent 1.3.6.1.4.1.289.2.1.1.3.5.2.1.27
This object presents the percentage of reception bandwidth used by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportLIPCount 1.3.6.1.4.1.289.2.1.1.3.5.2.1.28
This object counts the number of LIPs detected by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportConnectionsMade 1.3.6.1.4.1.289.2.1.1.3.5.2.1.29
This object counts the number of connections made by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportConnectionsStalled 1.3.6.1.4.1.289.2.1.1.3.5.2.1.30
This object counts the number of connections stalled by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportConnectionsAborted 1.3.6.1.4.1.289.2.1.1.3.5.2.1.31
This object counts the number of connections aborted by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000AcctHportConnectionsAccepted 1.3.6.1.4.1.289.2.1.1.3.5.2.1.32
This object counts the number of connections accepted by this H_Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es1000PortBportScn 1
A es1000PortBportScn is generated whenever a B_Port changes its operational state. For instance, the B_Port goes from online to offline.
TRAP-TYPE    

es1000PortHportScn 2
A es1000PortHportScn is generated whenever a H_Port changes its operational state. For instance, the H_Port goes from online to offline.
TRAP-TYPE    

es1000CompScn 3
A es1000CompScn is generated whenever a COMPONENT status changes its operational state.
TRAP-TYPE