ERICSSON-ALARM-IRP-MIB

File: ERICSSON-ALARM-IRP-MIB.mib (39162 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 enterprises TEXTUAL-CONVENTION
DateAndTime OBJECT-GROUP NOTIFICATION-GROUP
MODULE-COMPLIANCE

Defined Types

DisplayString80  
max 80 chars
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..80)  

DisplayString200  
max 200 chars
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..200)  

ManagedObjectClass  
A name identifying a Managed Object Class
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..30)  

ManagedObjectInstance  
A distinguished name identifying a Managed Object Instance through a containment hierarchy within the name space of its agent. It is important that this name is consistant with naming used over other interfaces, such as interfaces for configuration and performance management.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..200)  

TypeOfEvent  
Event type as specified in ITU recommendations X.733 and X.736.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), communicationsAlarm(2), environmentalAlarm(3), equipmentAlarm(4), processingErrorAlarm(10), qualityOfServiceAlarm(11), integrityViolation(15), operationalViolation(16), physicalViolation(17), securityServiceViolation(18), timeDomainViolation(19)  

PerceivedSeverity  
Perceived severity as specified in ITU recommendation X.733. The value indeterminate(0) is not recommended to be used.
TEXTUAL-CONVENTION    
  INTEGER indeterminate(0), critical(1), major(2), minor(3), warning(4), cleared(5)  

ProbableCause  
Probable cause as specified in ITU recommendations M.3100, X.733 and X.736, and in ETSI recommendation GSM 12.11.
TEXTUAL-CONVENTION    
  INTEGER m3100Indeterminate(0), m3100AlarmIndicationSignal(1), m3100CallSetupFailure(2), m3100DegradedSignal(3), m3100FarEndReceiverFailure(4), m3100FramingError(5), m3100LossOfFrame(6), m3100LossOfPointer(7), m3100LossOfSignal(8), m3100PayloadTypeMismatch(9), m3100TransmissionError(10), m3100RemoteAlarmInterface(11), m3100ExcessiveBitErrorRate(12), m3100PathTraceMismatch(13), m3100Unavailable(14), m3100SignalLabelMismatch(15), m3100LossOfMultiFrame(16), m3100BackPlaneFailure(51), m3100DataSetProblem(52), m3100EquipmentIdentifierDuplication(53), m3100ExternalIfDeviceProblem(54), m3100LineCardProblem(55), m3100MultiplexerProblem(56), m3100NeIdentifierDuplication(57), m3100PowerProblem(58), m3100ProcessorProblem(59), m3100ProtectionPathFailure(60), m3100ReceiverFailure(61), m3100ReplaceableUnitMissing(62), m3100ReplaceableUnitTypeMismatch(63), m3100SynchronisationSourceMismatch(64), m3100TerminalProblem(65), m3100TimingProblem(66), m3100TransmitterFailure(67), m3100TrunkCardProblem(68), m3100ReplaceableUnitProblem(69), m3100AirCompressorFailure(101), m3100AirConditioningFailure(102), m3100AirDryerFailure(103), m3100BatteryDischarging(104), m3100BatteryFailure(105), m3100CommercialPowerFailure(106), m3100CoolingFanFailure(107), m3100EngineFailure(108), m3100FireDetectorFailure(109), m3100FuseFailure(110), m3100GeneratorFailure(111), m3100LowBatteryThreshold(112), m3100PumpFailure(113), m3100RectifierFailure(114), m3100RectifierHighVoltage(115), m3100RectifierLowVoltage(116), m3100VentilationSystemFailure(117), m3100EnclosureDoorOpen(118), m3100ExplosiveGas(119), m3100Fire(120), m3100Flood(121), m3100HighHumidity(122), m3100HighTemperature(123), m3100HighWind(124), m3100IceBuildUp(125), m3100LowFuel(127), m3100LowHumidity(128), m3100LowCablePressure(129), m3100LowTemperature(130), m3100LowWater(131), m3100Smoke(132), m3100ToxicGas(133), m3100StorageCapacityProblem(151), m3100MemoryMismatch(152), m3100CorruptData(153), m3100OutOfCPUCycles(154), m3100SoftwareEnvironmentProblem(155), m3100SoftwareDownloadFailure(156), x733AdapterError(301), x733ApplicationSubsystemFailure(302), x733BandwidthReduced(303), x733CommunicationsProtocolError(305), x733CommunicationsSubsystemFailure(306), x733ConfigurationOrCustomizationError(307), x733Congestion(308), x733CpuCyclesLimitExceeded(310), x733DataSetOrModemError(311), x733DTEDCEInterfaceError(313), x733EquipmentMalfunction(315), x733ExcessiveVibration(316), x733FileError(317), x733HeatingOrVentilationOrCoolingSystemProblem(321), x733HumidityUnacceptable(322), x733InputOutputDeviceError(323), x733InputDeviceError(324), x733LANError(325), x733LeakDetected(326), x733LocalNodeTransmissionError(327), x733MaterialSupplyExhausted(330), x733OutOfMemory(332), x733OuputDeviceError(333), x733PerformanceDegraded(334), x733PressureUnacceptable(336), x733QueueSizeExceeded(339), x733ReceiveFailure(340), x733RemoteNodeTransmissionError(342), x733ResourceAtOrNearingCapacity(343), x733ResponseTimeExcessive(344), x733RetransmissionRateExcessive(345), x733SoftwareError(346), x733SoftwareProgramAbnormallyTerminated(347), x733SoftwareProgramError(348), x733TemperatureUnacceptable(350), x733ThresholdCrossed(351), x733ToxicLeakDetected(353), x733TransmitFailure(354), x733UnderlyingResourceUnavailable(356), x733VersionMismatch(357), x736AuthenticationFailure(401), x736BreachOfConfidentiality(402), x736CableTamper(403), x736DelayedInformation(404), x736DenialOfService(405), x736DuplicateInformation(406), x736InformationMissing(407), x736InformationModificationDetected(408), x736InformationOutOfSequence(409), x736IntrusionDetection(410), x736KeyExpired(411), x736NonRepudiationFailure(412), x736OutOfHoursActivity(413), x736OutOfService(414), x736ProceduralError(415), x736UnauthorizedAccessAttempt(416), x736UnexpectedInformation(417), x736UnspecifiedReason(418), gsm1211AbisToBTSInterfaceFailure(501), gsm1211AbisToTRXInterfaceFailure(502), gsm1211AntennaProblem(503), gsm1211BatteryBreakdown(504), gsm1211BatteryChargingFault(505), gsm1211ClockSynchronisationProblem(5056), gsm1211CombinerProblem(507), gsm1211DiskProblem(508), gsm1211ExcessiveReceiverTemperature(510), gsm1211ExcessiveTransmitterOutputPower(511), gsm1211ExcessiveTransmitterTemperature(512), gsm1211FrequencyHoppingDegraded(513), gsm1211FrequencyHoppingFailure(514), gsm1211FrequencyRedefinitionFailed(515), gsm1211LineInterfaceFailure(516), gsm1211LinkFailure(517), gsm1211LossOfSynchronisation(518), gsm1211LostRedundancy(519), gsm1211MainsBreakdownWithBatteryBackUp(520), gsm1211MainsBreakdownWithoutBatteryBackUp(521), gsm1211PowerSupplyFailure(522), gsm1211ReceiverAntennaFault(523), gsm1211ReceiverMulticouplerFailure(525), gsm1211ReducedTransmitterOutputPower(526), gsm1211SignalQualityEvaluationFault(527), gsm1211TimeslotHardwareFailure(528), gsm1211TransceiverProblem(529), gsm1211TranscoderProblem(530), gsm1211TranscoderOrRateAdapterProblem(531), gsm1211TransmitterAntennaFailure(532), gsm1211TransmitterAntennaNotAdjusted(533), gsm1211TransmitterLowVoltageOrCurrent(535), gsm1211TransmitterOffFrequency(536), gsm1211DatabaseInconsistency(537), gsm1211FileSystemCallUnsuccessful(538), gsm1211InputParameterOutOfRange(539), gsm1211InvalidParameter(540), gsm1211InvalidPointer(541), gsm1211MessageNotExpected(542), gsm1211MessageNotInitialised(543), gsm1211MessageOutOfSequence(544), gsm1211SystemCallUnsuccessful(545), gsm1211TimeoutExpired(546), gsm1211VariableOutOfRange(547), gsm1211WatchDogTimerExpired(548), gsm1211CoolingSystemFailure(549), gsm1211ExternalEquipmentFailure(550), gsm1211ExternalPowerSupplyFailure(551), gsm1211ExternalTransmissionDeviceFailure(552), gsm1211ReducedAlarmReporting(561), gsm1211ReducedEventReporting(562), gsm1211ReducedLoggingCapability(563), gsm1211SystemResourcesOverload(564), gsm1211BroadcastChannelFailure(565), gsm1211ConnectionEstablishmentError(566), gsm1211InvalidMessageReceived(567), gsm1211InvalidMSUReceived(568), gsm1211LAPDLinkProtocolFailure(569), gsm1211LocalAlarmIndication(570), gsm1211RemoteAlarmIndication(571), gsm1211RoutingFailure(572), gsm1211SS7ProtocolFailure(573), gsm1211TransmissionError(574)  

AlarmEntry  
SEQUENCE    
  alarmId Integer32
  alarmManagedObjectClass ManagedObjectClass
  alarmManagedObjectInstance ManagedObjectInstance
  alarmEventTime DateAndTime
  alarmEventType TypeOfEvent
  alarmProbableCause ProbableCause
  alarmPerceivedSeverity PerceivedSeverity
  alarmSpecificProblem DisplayString80
  alarmAckUser DisplayString80
  alarmAckTime DateAndTime
  alarmCommentUser DisplayString80
  alarmCommentText DisplayString200
  alarmAdditionalText DisplayString200

Defined Values

alarmIrpMIB 1.3.6.1.4.1.3881.2
This SNMP MIB-module constitutes the Ericsson Alarm Integration Reference Point (IRP) solution set for SNMP, version 1:2. The purpose of this IRP is to define an interface though which a 'system' (typically a network element manager or a network element) can communicate alarm information for its managed objects to one or several 'actors' (typically network management systems). An alarm is a kind of object that represents an abnormal condition for a managed object. An alarm is active as long as the corresponding abnormal condition remains. The system maintains an 'Alarm Table' containing all currently active alarms for its managed objects. When an alarm is cleared, it is removed from the list and no longer accessible. Alarms can be forwarded to the actors either synchronously (requested through get, get-next or get- bulk PDUs) or asynchrously (through inform or trap PDUs) whenever an entry in the Alarm Table is created, modified or cleared.
MODULE-IDENTITY    

alarmObjects 1.3.6.1.4.1.3881.2.1
OBJECT IDENTIFIER    

alarmNotifications 1.3.6.1.4.1.3881.2.2
OBJECT IDENTIFIER    

alarmNotificationPrefix 1.3.6.1.4.1.3881.2.2.0
OBJECT IDENTIFIER    

alarmConformance 1.3.6.1.4.1.3881.2.3
OBJECT IDENTIFIER    

alarmIrpVersion 1.3.6.1.4.1.3881.2.1.1
This object represents the version of the Alarm IRP SNMPv2 Solution Set supported by the agent. The format is 'xy', where 'x' is the version of the information model and 'y' the version of the solution set corresponding to this information model.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

alarmIndeterminateNumber 1.3.6.1.4.1.3881.2.1.2
This object determines the number of currently active alarms with perceived severity 'indeterminate'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmCriticalNumber 1.3.6.1.4.1.3881.2.1.3
This object determines the number of currently active alarms with perceived severity 'critical'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmMajorNumber 1.3.6.1.4.1.3881.2.1.4
This object determines the number of currently active alarms with perceived severity 'major'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmMinorNumber 1.3.6.1.4.1.3881.2.1.5
This object determines the number of currently active alarms with perceived severity 'minor'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmWarningNumber 1.3.6.1.4.1.3881.2.1.6
This object determines the number of currently active alarms with perceived severity 'warning'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmNumber 1.3.6.1.4.1.3881.2.1.7
This object determines the total number of currently active alarms, i.e. the total number of entries in the Alarm Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmTable 1.3.6.1.4.1.3881.2.1.8
Table with information about the alarms that are currently active in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmEntry

alarmEntry 1.3.6.1.4.1.3881.2.1.8.1
One entry in the table holds one current alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlarmEntry  

alarmId 1.3.6.1.4.1.3881.2.1.8.1.1
This object uniquely identifies an entry in the Alarm Table. It increases every time a new alarm occurs. Due to cleared alarms the index will not be contiguous. When the maximum is reached of Integer32, the value of this object rolls over to 1. The actor must use 'alarmEventTime' to sort on chronological order. The alarmId object is read-only even though it is used as index in the Alarm Table. The reason is that this facilities a convenient way to extract the corresponding value from a notification where the object is included.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

alarmManagedObjectClass 1.3.6.1.4.1.3881.2.1.8.1.2
This object identifies the class of network resources to which the subject alarm is related.
Status: current Access: read-only
OBJECT-TYPE    
  ManagedObjectClass  

alarmManagedObjectInstance 1.3.6.1.4.1.3881.2.1.8.1.3
This object identifies the instance (of a class) of network resource to which the subject alarm is related.
Status: current Access: read-only
OBJECT-TYPE    
  ManagedObjectInstance  

alarmEventTime 1.3.6.1.4.1.3881.2.1.8.1.4
This object represents the time of occurrence of the subject alarm. If the alarm changes 'perceivedSeverity', then this object represents the time of the last severity change, else it represents the time carried in the original alarm emitted by the alarmed network resource. The time indication is in UTC (Co-ordinated Universal Time).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

alarmEventType 1.3.6.1.4.1.3881.2.1.8.1.5
This object represents the type of event according to the ITU recommendations X.733/X.736.
Status: current Access: read-only
OBJECT-TYPE    
  TypeOfEvent  

alarmProbableCause 1.3.6.1.4.1.3881.2.1.8.1.6
This object represents the probable cause identification code (generic classification) for the subject alarm according to the ITU recommendations M.3100/X.733/X.736 and ETSI recommendation GSM 12.11.
Status: current Access: read-only
OBJECT-TYPE    
  ProbableCause  

alarmPerceivedSeverity 1.3.6.1.4.1.3881.2.1.8.1.7
This object represents the perceived severity of the subject alarm according to the ITU recommendation X.733. If the system changes the perceived severity of an existing alarm to a higher value, the corresponding 'alarmAckUser' and 'alarmAckTime' objects are cleared.
Status: current Access: read-only
OBJECT-TYPE    
  PerceivedSeverity  

alarmSpecificProblem 1.3.6.1.4.1.3881.2.1.8.1.8
This object represents the specific problem identification code for the subject alarm. This is a more detailed (product specific) identification compared to the (generic) 'alarmprobableCause'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString80  

alarmAckUser 1.3.6.1.4.1.3881.2.1.8.1.9
This object is used to define the id of a user that acknowledge the subject alarm. An alarm can be unacknowledged by clearing this object. This object shall always be set or cleared in the same set request as the 'alarmAckTime' object defined below. The system will respond with 'inconsistentValue' upon attempts to set this object without setting 'alarmAckTime'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString80  

alarmAckTime 1.3.6.1.4.1.3881.2.1.8.1.10
This object represents the time when the subject alarm was acknowledged. This object shall always be set or cleared in the same set request as the 'alarmAckUser' object defined above. The system will respond with 'inconsistentValue' upon attempts to set this object without setting 'alarmAckTime'. The time indication is in UTC (Co-ordinated Universal Time).
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

alarmCommentUser 1.3.6.1.4.1.3881.2.1.8.1.11
This object is used to define the id of a user that enters a comment for the subject alarm. This object shall always be set in the same request as the 'alarmCommentText' object defined below. The system will respond with 'inconsistentValue' upon attempts to set this object without setting 'alarmCommentText'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString80  

alarmCommentText 1.3.6.1.4.1.3881.2.1.8.1.12
This object represents a comment added by an actor to the subject alarm. This object shall always be set in the same set request as the 'alarmCommentUser' object defined above. The system will respond with 'inconsistentValue' upon attempts to set this object without setting 'alarmAckUser'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString200  

alarmAdditionalText 1.3.6.1.4.1.3881.2.1.8.1.13
This object represents some arbitrary additional text for the subject alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString200  

notificationId 1.3.6.1.4.1.3881.2.1.9
This object uniquely identifies a notification. It increases every time a new notification is sent. When the maximum is reached of Integer32, the value of this object rolls over to 1.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alarmNew 1.3.6.1.4.1.3881.2.2.0.1
This notification is sent when a new Alarm is generated and stored in the Alarm Table. Note that the notification does not include all objects for the corresponding entry in the Alarm Table. The reason is that some environments may have problems with large PDUs. Thus, the notification receiver must get the missing objects from the Alarm Table.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

alarmChanged 1.3.6.1.4.1.3881.2.2.0.2
This notification is generated when any of the attributes of an Alarm has changed. Note that the EventTime value in the notification will be different than that in the original notifyNewAlarm if and only if the alarmPerceivedSeverity value is different from that carried in original notifyNewAlarm. Note that the notification does not include all objects for the corresponding entry in the Alarm Table. The reason is that some environments may have problems with large PDUs. Thus, the notification receiver must get the missing objects from the Alarm Table.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

alarmCleared 1.3.6.1.4.1.3881.2.2.0.3
This notification is generated when an alarm is cleared. A cleared alarm is removed from the Alarm Table and is no longer accessible.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

alarmCompliances 1.3.6.1.4.1.3881.2.3.1
OBJECT IDENTIFIER    

alarmGroups 1.3.6.1.4.1.3881.2.3.2
OBJECT IDENTIFIER    

alarmCompliance 1.3.6.1.4.1.3881.2.3.1.1
A collection of objects that are required for compliance to the ALARM-IRP.
Status: current Access: read-only
MODULE-COMPLIANCE    

alarmAdminMandatoryGroup 1.3.6.1.4.1.3881.2.3.2.1
A collection of mandatory objects holding administrative information.
Status: current Access: read-only
OBJECT-GROUP    

alarmNumberGroup 1.3.6.1.4.1.3881.2.3.2.2
A collection of optional objects for retrieval of the number of currently active alarms.
Status: current Access: read-only
OBJECT-GROUP    

alarmMandatoryGroup 1.3.6.1.4.1.3881.2.3.2.3
A collection of objects that represents mandatory alarm attributes.
Status: current Access: read-only
OBJECT-GROUP    

alarmOptionalGroup 1.3.6.1.4.1.3881.2.3.2.4
A collection of objects that represents optional alarm attributes.
Status: current Access: read-only
OBJECT-GROUP    

alarmNotificationMandatoryGroup 1.3.6.1.4.1.3881.2.3.2.5
A collection of mandatory alarm notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

alarmNotificationOptionalGroup 1.3.6.1.4.1.3881.2.3.2.6
A collection of optional alarm notifications.
Status: current Access: read-only
NOTIFICATION-GROUP