EQLCONTROLLER-MIB

File: EQLCONTROLLER-MIB.mib (39975 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	EQUALLOGIC-SMI
EQLGROUP-MIB	EQLMEMBER-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	Counter32	Counter64
TimeTicks	enterprises	DisplayString
equalLogic	eqlGroupId	eqlMemberIndex

Defined Types

EqlControllerEntry
SEQUENCE
	eqlControllerIndex	Integer32
	eqlControllerModel	DisplayString
	eqlControllerCMRevision	DisplayString
	eqlControllerSwRevision	DisplayString
	eqlControllerBatteryStatus	INTEGER
	eqlControllerUpTime	Counter32
	eqlControllerProcessorTemp	Integer32
	eqlControllerChipsetTemp	Integer32
	eqlControllerPrimaryOrSecondary	INTEGER
	eqlControllerPrimaryFlashImageRev	DisplayString
	eqlControllerSecondaryFlashImageRev	DisplayString
	eqlControllerSerialNumber	DisplayString
	eqlControllerDate	DisplayString
	eqlControllerECO	DisplayString
	eqlControllerEEprom	OCTET STRING
	eqlControllerPLDrev	Unsigned32
	eqlControllerPlatformType	Unsigned32
	eqlControllerPlatformVersion	Unsigned32
	eqlControllerCPUPass	Unsigned32
	eqlControllerCPUrev	Unsigned32
	eqlControllerCPUfreq	Unsigned32
	eqlControllerPhysRam	Unsigned32
	eqlControllerBootRomVersion	DisplayString
	eqlControllerBootRomBuildDate	DisplayString
	eqlControllerInfoMsg	DisplayString
	eqlControllerAthenaSataVersion	DisplayString
	eqlControllerMajorVersion	Unsigned32
	eqlControllerMinorVersion	Unsigned32
	eqlControllerMaintenanceVersion	Unsigned32
	eqlControllerSWCompatibilityLevel	Unsigned32
	eqlControllerFullSwRevision	DisplayString
	eqlControllerNVRAMBattery	INTEGER
	eqlControllerSerialNumber2	DisplayString
	eqlControllerType	DisplayString
	eqlControllerBootTime	Counter32

EqlBackplaneEntry
SEQUENCE
	eqlBackplaneIndex	Integer32
	eqlBackplanePartNum	DisplayString
	eqlBackplaneRev	DisplayString
	eqlBackplaneDate	DisplayString
	eqlBackplaneSN	DisplayString
	eqlBackplaneECO	DisplayString
	eqlBackplaneEEprom	OCTET STRING
	eqlBackplaneSN2	DisplayString
	eqlBackplaneType	DisplayString
	eqlBackplaneTypeId	Integer32

EqlEMMEntry
SEQUENCE
	eqlEMMIndex	Integer32
	eqlEMMModel	DisplayString
	eqlEMMPartNum	DisplayString
	eqlEMMRev	DisplayString
	eqlEMMDate	DisplayString
	eqlEMMSN	DisplayString
	eqlEMMECO	DisplayString
	eqlEMMEEprom	OCTET STRING
	eqlEMMSN2	DisplayString

EqlDaughterCardEntry
SEQUENCE
	eqlDaughterCardIndex	Integer32
	eqlDaughterCardModel	DisplayString
	eqlDaughterCardPartNum	DisplayString
	eqlDaughterCardRev	DisplayString
	eqlDaughterCardDate	DisplayString
	eqlDaughterCardSN	DisplayString
	eqlDaughterCardECO	DisplayString
	eqlDaughterCardEEprom	OCTET STRING

EqlChannelCardEntry
SEQUENCE
	eqlChannelCardIndex	Unsigned32
	eqlChannelCardSerialNumber	DisplayString
	eqlChannelCardFirmwareRev	DisplayString
	eqlChannelCardInitRev	DisplayString
	eqlChannelCardStatus	INTEGER

EqlSFPEntry
SEQUENCE
	eqlSFPIndex	Unsigned32
	eqlSFPMode	INTEGER
	eqlSFPIfIndex	INTEGER
	eqlSFPIdentifier	INTEGER
	eqlSFPConnector	INTEGER
	eqlSFPBitrate	INTEGER
	eqlSFPLength1	INTEGER
	eqlSFPLength2	INTEGER
	eqlSFPVendorName	DisplayString
	eqlSFPPartNumber	DisplayString
	eqlSFPFirmwareRev	DisplayString
	eqlSFPSerialNumber	DisplayString
	eqlSFPDateCode	DisplayString
	eqlSFPStatus	INTEGER

Defined Values

eqlcontrollerModule		1.3.6.1.4.1.12740.4
Copyright (c) 2004-2014 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
MODULE-IDENTITY

eqlcontrollerObjects		1.3.6.1.4.1.12740.4.1
OBJECT IDENTIFIER

eqlcontrollerNotifications		1.3.6.1.4.1.12740.4.2
OBJECT IDENTIFIER

eqlcontrollerConformance		1.3.6.1.4.1.12740.4.3
OBJECT IDENTIFIER

eqlbackplaneObjects		1.3.6.1.4.1.12740.4.4
OBJECT IDENTIFIER

eqlbackplaneNotifications		1.3.6.1.4.1.12740.4.5
OBJECT IDENTIFIER

eqlbackplaneConformance		1.3.6.1.4.1.12740.4.6
OBJECT IDENTIFIER

eqlemmObjects		1.3.6.1.4.1.12740.4.7
OBJECT IDENTIFIER

eqlemmNotifications		1.3.6.1.4.1.12740.4.8
OBJECT IDENTIFIER

eqlemmConformance		1.3.6.1.4.1.12740.4.9
OBJECT IDENTIFIER

eqldaughtercardObjects		1.3.6.1.4.1.12740.4.10
OBJECT IDENTIFIER

eqldaughtercardNotifications		1.3.6.1.4.1.12740.4.11
OBJECT IDENTIFIER

eqldaughtercardConformance		1.3.6.1.4.1.12740.4.12
OBJECT IDENTIFIER

eqlchannelcardObjects		1.3.6.1.4.1.12740.4.13
OBJECT IDENTIFIER

eqlsfpObjects		1.3.6.1.4.1.12740.4.14
OBJECT IDENTIFIER

eqlControllerTable		1.3.6.1.4.1.12740.4.1.1
EqualLogic-Dynamic Member Controller Table. This table contains controller status information. One table entry per controller. It is indexed by controller slot number. The number of entries is equal to the number of controllers that are present in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlControllerEntry

eqlControllerEntry		1.3.6.1.4.1.12740.4.1.1.1
An entry (row) containing controller status information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlControllerEntry

eqlControllerIndex		1.3.6.1.4.1.12740.4.1.1.1.1
The index value that uniquely identifies the controller. It is equal to the controller slot number. The minimum slot number is 1
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2

eqlControllerModel		1.3.6.1.4.1.12740.4.1.1.1.2
This variable specifies controller model. Is value of Part=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

eqlControllerCMRevision		1.3.6.1.4.1.12740.4.1.1.1.3
CM version number; Is value of Rev=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..9)

eqlControllerSwRevision		1.3.6.1.4.1.12740.4.1.1.1.4
This variable specifies the customer visible controller software revision.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..96)

eqlControllerBatteryStatus		1.3.6.1.4.1.12740.4.1.1.1.5
This variable specifies controller battery status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), failed(2), good-battery-is-charging(3), low-voltage-status(4), low-voltage-is-charging(5), missing-battery(6), high-temp(7), low-temp(8), end-of-life(9), end-of-life-warning(10)

eqlControllerUpTime		1.3.6.1.4.1.12740.4.1.1.1.6
This variable specifies time interval since the controller was last booted in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eqlControllerProcessorTemp		1.3.6.1.4.1.12740.4.1.1.1.7
This variable specifies the temperature in Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

eqlControllerChipsetTemp		1.3.6.1.4.1.12740.4.1.1.1.8
This variable specifies the temperature in Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

eqlControllerPrimaryOrSecondary		1.3.6.1.4.1.12740.4.1.1.1.9
This variable specifies if the controller is a primary or secondary controller.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2)

eqlControllerPrimaryFlashImageRev		1.3.6.1.4.1.12740.4.1.1.1.10
The revision of the primary flash image.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..40)

eqlControllerSecondaryFlashImageRev		1.3.6.1.4.1.12740.4.1.1.1.11
The revision of the secondary flash image.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..40)

eqlControllerSerialNumber		1.3.6.1.4.1.12740.4.1.1.1.12
This variable specifies controller serial number. Is value of SN=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlControllerDate		1.3.6.1.4.1.12740.4.1.1.1.13
This variable specifies date of mfg of the CM. Is value of Date=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlControllerECO		1.3.6.1.4.1.12740.4.1.1.1.14
This variable specifies eco level of the CM. Is value of ECO=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlControllerEEprom		1.3.6.1.4.1.12740.4.1.1.1.15
The contents of the eeprom.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

eqlControllerPLDrev		1.3.6.1.4.1.12740.4.1.1.1.16
This variable specifies pld version number.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerPlatformType		1.3.6.1.4.1.12740.4.1.1.1.17
This variable specifies the platform type. If the number is negative its a simulator. If zero its an eval platform. If >= 1 is the version of the pss board -- does this mean cm rev?
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerPlatformVersion		1.3.6.1.4.1.12740.4.1.1.1.18
This variable specifies the version of the pss board (ie CM?)
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerCPUPass		1.3.6.1.4.1.12740.4.1.1.1.19
This variable specifies silicon rev.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerCPUrev		1.3.6.1.4.1.12740.4.1.1.1.20
This variable specifies the revision of the cpu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerCPUfreq		1.3.6.1.4.1.12740.4.1.1.1.21
This variable specifies the cpu freq in MHz.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerPhysRam		1.3.6.1.4.1.12740.4.1.1.1.22
This variable specifies the amount of physical memory in MB.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerBootRomVersion		1.3.6.1.4.1.12740.4.1.1.1.23
This variable specifies the bootrom version number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlControllerBootRomBuildDate		1.3.6.1.4.1.12740.4.1.1.1.24
This variable specifies the date and time bootrom image was built.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(128)

eqlControllerInfoMsg		1.3.6.1.4.1.12740.4.1.1.1.25
This variable is basic info on the cpu at bootup.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

eqlControllerAthenaSataVersion		1.3.6.1.4.1.12740.4.1.1.1.26
This variable is the Athena Sata revision for all Athena chips.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

eqlControllerMajorVersion		1.3.6.1.4.1.12740.4.1.1.1.27
This variable specifies the major version number of the software present on the controller module.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerMinorVersion		1.3.6.1.4.1.12740.4.1.1.1.28
This variable specifies the minor version number of the software present on the controller module.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerMaintenanceVersion		1.3.6.1.4.1.12740.4.1.1.1.29
This variable specifies the maintenance version number of the software present on the controller module.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerSWCompatibilityLevel		1.3.6.1.4.1.12740.4.1.1.1.30
This variable specifies the compatibility level of the software present on the controller module.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eqlControllerFullSwRevision		1.3.6.1.4.1.12740.4.1.1.1.31
This variable specifies controller software revision.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..96)

eqlControllerNVRAMBattery		1.3.6.1.4.1.12740.4.1.1.1.32
This variable represents the NVRAM Battery on CM. Value would be zero if there is no NVRAM Battery( old CM).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	not-present(0), good(1), bad(2), unknown(3)

eqlControllerSerialNumber2		1.3.6.1.4.1.12740.4.1.1.1.33
This variable specifies controller serial number. Is value of SN=.The eqlControllerSerialNumber is deprecated because this value can be upto 15 characters for manhattan.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

eqlControllerType		1.3.6.1.4.1.12740.4.1.1.1.34
This variable specifies the type of the controller module. Ex: Type II
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

eqlControllerBootTime		1.3.6.1.4.1.12740.4.1.1.1.35
This variable specifies time at which the controller was booted expressed as seconds since epoch.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eqlBackplaneTable		1.3.6.1.4.1.12740.4.4.1
EqualLogic-Dynamic Backplane Table. This table contains backplane status information. There is only one table entry for the one backplane per PSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlBackplaneEntry

eqlBackplaneEntry		1.3.6.1.4.1.12740.4.4.1.1
An entry (row) containing backplane status information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlBackplaneEntry

eqlBackplaneIndex		1.3.6.1.4.1.12740.4.4.1.1.1
The index value that uniquely identifies the backplane. A well chosen number for the index is 1. It is in fact the only valid index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2

eqlBackplanePartNum		1.3.6.1.4.1.12740.4.4.1.1.2
This variable specifies part number of the backplane.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlBackplaneRev		1.3.6.1.4.1.12740.4.4.1.1.3
This variable specifies revision of the backplane. Is value of Rev=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlBackplaneDate		1.3.6.1.4.1.12740.4.4.1.1.4
This variable specifies date of mfg of the backplane.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlBackplaneSN		1.3.6.1.4.1.12740.4.4.1.1.5
This variable specifies serial number of the backplane.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlBackplaneECO		1.3.6.1.4.1.12740.4.4.1.1.6
This variable specifies eco level of the backplane.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlBackplaneEEprom		1.3.6.1.4.1.12740.4.4.1.1.7
The contents of the eeprom.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

eqlBackplaneSN2		1.3.6.1.4.1.12740.4.4.1.1.8
This variable specifies the backplane serial number. Is value of SN=.The eqlBackplaneSN is deprecated because this value can be up to 15 characters for manhattan.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

eqlBackplaneType		1.3.6.1.4.1.12740.4.4.1.1.9
This variable specifies the backplane type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

eqlBackplaneTypeId		1.3.6.1.4.1.12740.4.4.1.1.10
This variable specifies the backplane type as an Id. Used for Globalization.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

eqlEMMTable		1.3.6.1.4.1.12740.4.7.1
EqualLogic-Dynamic Member EMM Table. This table contains enclosure management status information. One table entry per emm. It is indexed by emm index. The number of entries is equal to the number of emms that are present in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlEMMEntry

eqlEMMEntry		1.3.6.1.4.1.12740.4.7.1.1
An entry (row) containing emm status information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlEMMEntry

eqlEMMIndex		1.3.6.1.4.1.12740.4.7.1.1.1
The index value that uniquely identifies the EMM subsystem.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..3

eqlEMMModel		1.3.6.1.4.1.12740.4.7.1.1.2
This variable specifies controller model. Is value of Part=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

eqlEMMPartNum		1.3.6.1.4.1.12740.4.7.1.1.3
This variable specifies part number of the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlEMMRev		1.3.6.1.4.1.12740.4.7.1.1.4
This variable specifies revision of the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlEMMDate		1.3.6.1.4.1.12740.4.7.1.1.5
This variable specifies date of mfg of the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlEMMSN		1.3.6.1.4.1.12740.4.7.1.1.6
This variable specifies serial number of the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlEMMECO		1.3.6.1.4.1.12740.4.7.1.1.7
This variable specifies eco level of the CM.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlEMMEEprom		1.3.6.1.4.1.12740.4.7.1.1.8
The contents of the eeprom.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

eqlEMMSN2		1.3.6.1.4.1.12740.4.7.1.1.9
This variable specifies the serial number. Is value of SN=.The eqlEMMSN is deprecated because this value can be up to 15 characters for manhattan.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

eqlDaughterCardTable		1.3.6.1.4.1.12740.4.10.1
EqualLogic-Dynamic Member DaughterCard Table. This table contains daughter card information. One table entry per daughter card. It is indexed by daughter card index. The number of entries is equal to the number of daughter cards that are present in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlDaughterCardEntry

eqlDaughterCardEntry		1.3.6.1.4.1.12740.4.10.1.1
An entry (row) containing daughter card information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlDaughterCardEntry

eqlDaughterCardIndex		1.3.6.1.4.1.12740.4.10.1.1.1
The index value that uniquely identifies the DaughterCard subsystem. 1 based
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2

eqlDaughterCardModel		1.3.6.1.4.1.12740.4.10.1.1.2
This variable specifies controller model. Is value of Part=
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

eqlDaughterCardPartNum		1.3.6.1.4.1.12740.4.10.1.1.3
This variable specifies part number of the daughter card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlDaughterCardRev		1.3.6.1.4.1.12740.4.10.1.1.4
This variable specifies revision of the daughter card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlDaughterCardDate		1.3.6.1.4.1.12740.4.10.1.1.5
This variable specifies date of mfg of the daughter card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlDaughterCardSN		1.3.6.1.4.1.12740.4.10.1.1.6
This variable specifies serial number of the daughter card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlDaughterCardECO		1.3.6.1.4.1.12740.4.10.1.1.7
This variable specifies eco level of the daughter card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

eqlDaughterCardEEprom		1.3.6.1.4.1.12740.4.10.1.1.8
The contents of the eeprom.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

eqlChannelCardTable		1.3.6.1.4.1.12740.4.13.1
EqualLogic-Dynamic Member ChannelCard Table. This table contains channel card information. One table entry per channel card. It is indexed by channel card index. The number of entries is equal to the number of channel cards that are present in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlChannelCardEntry

eqlChannelCardEntry		1.3.6.1.4.1.12740.4.13.1.1
An entry (row) containing channel card information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlChannelCardEntry

eqlChannelCardIndex		1.3.6.1.4.1.12740.4.13.1.1.1
The index value that uniquely identifies the ChannelCard subsystem.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..100

eqlChannelCardSerialNumber		1.3.6.1.4.1.12740.4.13.1.1.2
This variable specifies serial number of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

eqlChannelCardFirmwareRev		1.3.6.1.4.1.12740.4.13.1.1.3
This variable specifies firmware revision of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

eqlChannelCardInitRev		1.3.6.1.4.1.12740.4.13.1.1.4
This variable specifies revision of the initialization configuration file.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

eqlChannelCardStatus		1.3.6.1.4.1.12740.4.13.1.1.5
This variable specifies the status of the channel card .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), not-present(1), failed(2), good(3)

eqlSFPTable		1.3.6.1.4.1.12740.4.14.1
EqualLogic-Dynamic Member SFP Table. This table contains SFP information. One table entry per SFP. It is indexed by SFP index. The number of entries is equal to the number of SFPs that are present in the system
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqlSFPEntry

eqlSFPEntry		1.3.6.1.4.1.12740.4.14.1.1
An entry (row) containing SFP information.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqlSFPEntry

eqlSFPIndex		1.3.6.1.4.1.12740.4.14.1.1.1
The index value that uniquely identifies the SFP.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..100

eqlSFPMode		1.3.6.1.4.1.12740.4.14.1.1.2
This variable specifies the mode of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), single-mode(1), multi-mode(2), copper(3), not-present(4)

eqlSFPIfIndex		1.3.6.1.4.1.12740.4.14.1.1.3
Index of the interface attached to the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eqlSFPIdentifier		1.3.6.1.4.1.12740.4.14.1.1.4
Identifies the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), sfp-transceiver(3)

eqlSFPConnector		1.3.6.1.4.1.12740.4.14.1.1.5
type of the SFP connector.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), lc(7), copper(33)

eqlSFPBitrate		1.3.6.1.4.1.12740.4.14.1.1.6
Bit rate of the SFP in units of 100 Mbits/sec. 103 => 10300 => 10 Gbps
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eqlSFPLength1		1.3.6.1.4.1.12740.4.14.1.1.7
If Mode is single mode, length in kilometres, Mode is multi mode, length in units of 10metres of 50/125 um fiber.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eqlSFPLength2		1.3.6.1.4.1.12740.4.14.1.1.8
If Mode is single mode, length in units of 100metres, Mode is multi mode, length in units of 10metres of 62/125 um fiber.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eqlSFPVendorName		1.3.6.1.4.1.12740.4.14.1.1.9
This variable specifies vendor name of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlSFPPartNumber		1.3.6.1.4.1.12740.4.14.1.1.10
This variable specifies part number of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlSFPFirmwareRev		1.3.6.1.4.1.12740.4.14.1.1.11
This variable specifies firmware revision of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlSFPSerialNumber		1.3.6.1.4.1.12740.4.14.1.1.12
This variable specifies serial number of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlSFPDateCode		1.3.6.1.4.1.12740.4.14.1.1.13
This variable specifies date of manufacture of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

eqlSFPStatus		1.3.6.1.4.1.12740.4.14.1.1.14
This variable specifies the status of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), not-present(1), failed(2), good(3)