EQL-DCB-MIB

File: EQL-DCB-MIB.mib (109347 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
EQUALLOGIC-SMI EQLGROUP-MIB EQLMEMBER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE enterprises
Counter32 Counter64 Integer32
Unsigned32 TimeInterval TruthValue
ifIndex equalLogic eqlGroupId
eqlMemberIndex

Defined Types

EqlDcbxTrafficClassGroupValue  
Indicates a traffic class group. Values 0-7 correspond to traffic class groups.
TEXTUAL-CONVENTION    
  Integer32 0..7  

EqlDcbxAppSelector  
Indicates the contents of a protocol object 0: Ethertype 1: TCP Port number 2: UDP Port number 3: Port number over both TCP and UDP 4: Port number over neither TCP nor UDP
TEXTUAL-CONVENTION    
  INTEGER asEthertype(0), asTCPPortNumber(1), asUDPPortNumber(2), asTCPUDPPortNumber(3), asNotTCPUDPPortNumber(4)  

EqlDcbxAppProtocol  
Contains the application protocol indicator the type of which is specified by an object with the syntax of EqlDcbxAppSelector
TEXTUAL-CONVENTION    
  Integer32 0..65535  

EqlDcbxSupportedCapacity  
Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight but may have fewer supported.
TEXTUAL-CONVENTION    
  Integer32 0..8  

EqlVlanIdentifier  
A value used to identify a VLAN for VLAN tagged frames.
TEXTUAL-CONVENTION    
  Unsigned32 0 | 1..4094 | 4095  

EqlIEEE8021PriorityValue  
An 802.1Q user priority value.
TEXTUAL-CONVENTION    
  Unsigned32 0..7  

EqlIEEEDraftSubtypeValue  
The sub-type to use within an 802.1Q draft TLV.
TEXTUAL-CONVENTION    
  Unsigned32 0..255  

EqlDcbxState  
Indicates the current state of a DCB feature.
TEXTUAL-CONVENTION    
  INTEGER off(0), on(1), disabled(2)  

EqlDcbxVlanState  
Indicates the current state of VLAN tagging.
TEXTUAL-CONVENTION    
  INTEGER off(0), static(1), dynamic(2)  

EqlDcbxTransmissionSelectionAlgorithm  
Indicates the Transmission Selection Algorithm 0: Strict priority 1: Credit-based shaper 2: Enhanced transmission selection 3-254: Reserved 255: Vendor-specific.
TEXTUAL-CONVENTION    
  INTEGER tsaStrictPriority(0), tsaCreditBasedShaper(1), tsaEnhancedTransmission(2), tsaVendorSpecific(255)  

EqlDcbxMode  
Indicates the current operating mode of DCB.
TEXTUAL-CONVENTION    
  INTEGER off(0), dcbx101Baseline(1), dcbxIeeeStandard(2)  

EqlDcbStaticIfEntry  
SEQUENCE    
  eqlDcbxConfigTCSupportedTxEnable TruthValue
  eqlDcbxConfigETSConfigurationTxEnable TruthValue
  eqlDcbxConfigETSRecommendationTxEnable TruthValue
  eqlDcbxConfigPFCTxEnable TruthValue
  eqlDcbxConfigAppPriorityTxEnable TruthValue
  eqlDcbxConfigQcnTxEnable TruthValue
  eqlDcbxAdminTCSupported EqlDcbxSupportedCapacity
  eqlDcbxAdminETSConMaxTCG EqlDcbxSupportedCapacity
  eqlDcbxAdminETSConWilling TruthValue
  eqlDcbxAdminETSConTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxAdminPFCWilling TruthValue
  eqlDcbxAdminPFCMBC TruthValue
  eqlDcbxAdminPFCCap EqlDcbxSupportedCapacity
  eqlDcbxAdminAppPriorityWilling TruthValue
  eqlDcbxConfigAutoDetectVLANEnable TruthValue
  eqlDcbxConfigVLANId EqlVlanIdentifier
  eqlDcbxAdminETSConTrafficClassGroupPri0 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri1 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri2 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri3 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri4 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri5 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri6 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSConTrafficClassGroupPri7 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminPFCEnableEnabledPri0 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri1 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri2 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri3 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri4 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri5 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri6 TruthValue
  eqlDcbxAdminPFCEnableEnabledPri7 TruthValue
  eqlDcbxAdminAppPriorityiSCSITxEnable TruthValue
  eqlDcbxAdminAppPriorityiSCSIProtocol EqlDcbxAppProtocol
  eqlDcbxAdminAppPriorityiSCSIPriority EqlIEEE8021PriorityValue
  eqlDcbxAdminAppPriorityFCoETxEnable TruthValue
  eqlDcbxAdminAppPriorityFCoEProtocol EqlDcbxAppProtocol
  eqlDcbxAdminAppPriorityFCoEPriority EqlIEEE8021PriorityValue
  eqlDcbxConfigDCBEnable TruthValue
  eqlDcbxConfigDCBX101Enable TruthValue
  eqlDcbxConfigDCBXIEEEDraftEnable TruthValue
  eqlDcbxConfigQcnSubtype EqlIEEEDraftSubtypeValue
  eqlDcbxConfigETSConSubtype EqlIEEEDraftSubtypeValue
  eqlDcbxConfigETSRecoSubtype EqlIEEEDraftSubtypeValue
  eqlDcbxConfigPFCSubtype EqlIEEEDraftSubtypeValue
  eqlDcbxConfigAppPrioritySubtype EqlIEEEDraftSubtypeValue
  eqlDcbxConfigTCSupportedSubtype EqlIEEEDraftSubtypeValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri0 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri1 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri2 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri3 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri4 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri5 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri6 EqlDcbxTrafficClassGroupValue
  eqlDcbxAdminETSRecoTrafficClassGroupPri7 EqlDcbxTrafficClassGroupValue
  eqlDcbCnGlobalMasterEnable TruthValue
  eqlDcbCnRpPortPriMaxRps Unsigned32
  eqlDcbCnRpgEnablePri0 TruthValue
  eqlDcbCnRpgEnablePri1 TruthValue
  eqlDcbCnRpgEnablePri2 TruthValue
  eqlDcbCnRpgEnablePri3 TruthValue
  eqlDcbCnRpgEnablePri4 TruthValue
  eqlDcbCnRpgEnablePri5 TruthValue
  eqlDcbCnRpgEnablePri6 TruthValue
  eqlDcbCnRpgEnablePri7 TruthValue
  eqlDcbCnRpgTimeReset TimeInterval
  eqlDcbCnRpgByteReset Unsigned32
  eqlDcbCnRpgThreshold Unsigned32
  eqlDcbCnRpgMaxRate Unsigned32
  eqlDcbCnRpgAiRate Unsigned32
  eqlDcbCnRpgHaiRate Unsigned32
  eqlDcbCnRpgGd Integer32
  eqlDcbCnRpgMinDecFac Unsigned32
  eqlDcbCnRpgMinRate Unsigned32
  eqlDcbDefaultiSCSIPriority EqlIEEE8021PriorityValue
  eqlDcbDefaultFCoEPriority EqlIEEE8021PriorityValue
  eqlDcbxAdminETSConTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSConTsaTc7 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxAdminETSRecoTsaTc7 EqlDcbxTransmissionSelectionAlgorithm

EqlDcbDynamicIfEntry  
SEQUENCE    
  eqlDcbPfcRequestsSent Counter32
  eqlDcbPfcIndicationsReceived Counter32
  eqlDcbxLocTCSupported EqlDcbxSupportedCapacity
  eqlDcbxLocETSConMaxTCG EqlDcbxSupportedCapacity
  eqlDcbxLocETSConWilling TruthValue
  eqlDcbxLocETSConTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxLocPFCWilling TruthValue
  eqlDcbxLocPFCMBC TruthValue
  eqlDcbxLocPFCCap EqlDcbxSupportedCapacity
  eqlDcbxLocAppPriorityWilling TruthValue
  eqlDcbxRemTCSupported EqlDcbxSupportedCapacity
  eqlDcbxRemETSConMaxTCG EqlDcbxSupportedCapacity
  eqlDcbxRemETSConWilling TruthValue
  eqlDcbxRemETSConTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxRemETSRecoTrafficClassGroupBandwidthTable OCTET STRING
  eqlDcbxRemPFCWilling TruthValue
  eqlDcbxRemPFCMBC TruthValue
  eqlDcbxRemPFCCap EqlDcbxSupportedCapacity
  eqlDcbxRemAppPriorityWilling TruthValue
  eqlDcbxLocETSConTrafficClassGroupPri0 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri1 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri2 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri3 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri4 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri5 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri6 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocETSConTrafficClassGroupPri7 EqlDcbxTrafficClassGroupValue
  eqlDcbxLocPFCEnableEnabledPri0 TruthValue
  eqlDcbxLocPFCEnableEnabledPri1 TruthValue
  eqlDcbxLocPFCEnableEnabledPri2 TruthValue
  eqlDcbxLocPFCEnableEnabledPri3 TruthValue
  eqlDcbxLocPFCEnableEnabledPri4 TruthValue
  eqlDcbxLocPFCEnableEnabledPri5 TruthValue
  eqlDcbxLocPFCEnableEnabledPri6 TruthValue
  eqlDcbxLocPFCEnableEnabledPri7 TruthValue
  eqlDcbxLocVLANId EqlVlanIdentifier
  eqlDcbxLocVLANState EqlDcbxVlanState
  eqlDcbxLocDCBState EqlDcbxState
  eqlDcbxLocPFCState EqlDcbxState
  eqlDcbxLocETSState EqlDcbxState
  eqlDcbxLocQCNState EqlDcbxState
  eqlDcbxLociSCSIPriority EqlIEEE8021PriorityValue
  eqlDcbxLocFCoEPriority EqlIEEE8021PriorityValue
  eqlDcbxLocBytesRxPri0 Counter64
  eqlDcbxLocBytesRxPri1 Counter64
  eqlDcbxLocBytesRxPri2 Counter64
  eqlDcbxLocBytesRxPri3 Counter64
  eqlDcbxLocBytesRxPri4 Counter64
  eqlDcbxLocBytesRxPri5 Counter64
  eqlDcbxLocBytesRxPri6 Counter64
  eqlDcbxLocBytesRxPri7 Counter64
  eqlDcbxLocBytesTxPri0 Counter64
  eqlDcbxLocBytesTxPri1 Counter64
  eqlDcbxLocBytesTxPri2 Counter64
  eqlDcbxLocBytesTxPri3 Counter64
  eqlDcbxLocBytesTxPri4 Counter64
  eqlDcbxLocBytesTxPri5 Counter64
  eqlDcbxLocBytesTxPri6 Counter64
  eqlDcbxLocBytesTxPri7 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri0 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri1 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri2 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri3 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri4 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri5 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri6 Counter64
  eqlDcbCnRpPortPriCreatedRpsPri7 Counter64
  eqlDcbCnRpPortPriCentisecondsPri0 Counter64
  eqlDcbCnRpPortPriCentisecondsPri1 Counter64
  eqlDcbCnRpPortPriCentisecondsPri2 Counter64
  eqlDcbCnRpPortPriCentisecondsPri3 Counter64
  eqlDcbCnRpPortPriCentisecondsPri4 Counter64
  eqlDcbCnRpPortPriCentisecondsPri5 Counter64
  eqlDcbCnRpPortPriCentisecondsPri6 Counter64
  eqlDcbCnRpPortPriCentisecondsPri7 Counter64
  eqlDcbxLocPfcPausePri0 Counter64
  eqlDcbxLocPfcPausePri1 Counter64
  eqlDcbxLocPfcPausePri2 Counter64
  eqlDcbxLocPfcPausePri3 Counter64
  eqlDcbxLocPfcPausePri4 Counter64
  eqlDcbxLocPfcPausePri5 Counter64
  eqlDcbxLocPfcPausePri6 Counter64
  eqlDcbxLocPfcPausePri7 Counter64
  eqlDcbxLocPfcUnpausePri0 Counter64
  eqlDcbxLocPfcUnpausePri1 Counter64
  eqlDcbxLocPfcUnpausePri2 Counter64
  eqlDcbxLocPfcUnpausePri3 Counter64
  eqlDcbxLocPfcUnpausePri4 Counter64
  eqlDcbxLocPfcUnpausePri5 Counter64
  eqlDcbxLocPfcUnpausePri6 Counter64
  eqlDcbxLocPfcUnpausePri7 Counter64
  eqlDcbxLocETSConTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSConTsaTc7 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocETSRecoTsaTc7 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSConTsaTc7 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc0 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc1 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc2 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc3 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc4 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc5 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc6 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxRemETSRecoTsaTc7 EqlDcbxTransmissionSelectionAlgorithm
  eqlDcbxLocDCBMode EqlDcbxMode

Defined Values

eqlDcbMib 1.3.6.1.4.1.12740.19
Data Center Bridging MIB module. Copyright (c) 2010-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. Copyright (C) IEEE (2009). This version of this MIB module is published as clause 17.7 of IEEE Std 802.1Qaz; see the standard itself for full legal notices.
MODULE-IDENTITY    

eqlDcbMIBObjects 1.3.6.1.4.1.12740.19.1
OBJECT IDENTIFIER    

eqlDcbStaticIfTable 1.3.6.1.4.1.12740.19.1.1
EqualLogic-Persistent A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDcbStaticIfEntry

eqlDcbStaticIfEntry 1.3.6.1.4.1.12740.19.1.1.1
An entry in the DCB table, containing information about DCB on a single interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDcbStaticIfEntry  

eqlDcbxConfigTCSupportedTxEnable 1.3.6.1.4.1.12740.19.1.1.1.1
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigETSConfigurationTxEnable 1.3.6.1.4.1.12740.19.1.1.1.2
The eqlDcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Configuration TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigETSRecommendationTxEnable 1.3.6.1.4.1.12740.19.1.1.1.3
The eqlDcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Recommendation TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigPFCTxEnable 1.3.6.1.4.1.12740.19.1.1.1.4
The eqlDcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Priority-based Flow Fontrol TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigAppPriorityTxEnable 1.3.6.1.4.1.12740.19.1.1.1.5
The eqlDcbxConfigAppPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application Priority TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigQcnTxEnable 1.3.6.1.4.1.12740.19.1.1.1.6
The eqlDcbxConfigQcnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Quantitized Congestion Notification TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminTCSupported 1.3.6.1.4.1.12740.19.1.1.1.7
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxAdminETSConMaxTCG 1.3.6.1.4.1.12740.19.1.1.1.8
Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxAdminETSConWilling 1.3.6.1.4.1.12740.19.1.1.1.9
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminETSConTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.1.1.10
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.1.1.11
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxAdminPFCWilling 1.3.6.1.4.1.12740.19.1.1.1.12
Indicates if the local system is willing to accept the PFC configuration of the remote system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCMBC 1.3.6.1.4.1.12740.19.1.1.1.13
Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCCap 1.3.6.1.4.1.12740.19.1.1.1.14
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxAdminAppPriorityWilling 1.3.6.1.4.1.12740.19.1.1.1.15
Indicates if the local system is willing to accept the Application Priority configuration of the remote system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigAutoDetectVLANEnable 1.3.6.1.4.1.12740.19.1.1.1.16
Enable automatic detection of VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigVLANId 1.3.6.1.4.1.12740.19.1.1.1.17
VLAN ID to use for DCB.
Status: current Access: read-write
OBJECT-TYPE    
  EqlVlanIdentifier  

eqlDcbxAdminETSConTrafficClassGroupPri0 1.3.6.1.4.1.12740.19.1.1.1.18
Indicates the traffic class group to which priority 0 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri1 1.3.6.1.4.1.12740.19.1.1.1.19
Indicates the traffic class group to which priority 1 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri2 1.3.6.1.4.1.12740.19.1.1.1.20
Indicates the traffic class group to which priority 2 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri3 1.3.6.1.4.1.12740.19.1.1.1.21
Indicates the traffic class group to which priority 3 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri4 1.3.6.1.4.1.12740.19.1.1.1.22
Indicates the traffic class group to which priority 4 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri5 1.3.6.1.4.1.12740.19.1.1.1.23
Indicates the traffic class group to which priority 5 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri6 1.3.6.1.4.1.12740.19.1.1.1.24
Indicates the traffic class group to which priority 6 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSConTrafficClassGroupPri7 1.3.6.1.4.1.12740.19.1.1.1.25
Indicates the traffic class group to which priority 7 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminPFCEnableEnabledPri0 1.3.6.1.4.1.12740.19.1.1.1.26
Indicates if PFC is enabled on priority 0
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri1 1.3.6.1.4.1.12740.19.1.1.1.27
Indicates if PFC is enabled on priority 1
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri2 1.3.6.1.4.1.12740.19.1.1.1.28
Indicates if PFC is enabled on priority 2
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri3 1.3.6.1.4.1.12740.19.1.1.1.29
Indicates if PFC is enabled on priority 3
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri4 1.3.6.1.4.1.12740.19.1.1.1.30
Indicates if PFC is enabled on priority 4
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri5 1.3.6.1.4.1.12740.19.1.1.1.31
Indicates if PFC is enabled on priority 5
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri6 1.3.6.1.4.1.12740.19.1.1.1.32
Indicates if PFC is enabled on priority 6
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminPFCEnableEnabledPri7 1.3.6.1.4.1.12740.19.1.1.1.33
Indicates if PFC is enabled on priority 7
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminAppPriorityiSCSITxEnable 1.3.6.1.4.1.12740.19.1.1.1.34
Indicates whether or not the iSCSI application priority entry is transmitted as part ot the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminAppPriorityiSCSIProtocol 1.3.6.1.4.1.12740.19.1.1.1.35
The protocol indicator used for iSCSI in the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxAppProtocol  

eqlDcbxAdminAppPriorityiSCSIPriority 1.3.6.1.4.1.12740.19.1.1.1.36
The priority value used for iSCSI in the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbxAdminAppPriorityFCoETxEnable 1.3.6.1.4.1.12740.19.1.1.1.37
Indicates whether or not the FCoE application priority entry is transmitted as part ot the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxAdminAppPriorityFCoEProtocol 1.3.6.1.4.1.12740.19.1.1.1.38
The protocol indicator used for FCoE in the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxAppProtocol  

eqlDcbxAdminAppPriorityFCoEPriority 1.3.6.1.4.1.12740.19.1.1.1.39
The priority value used for FCoE in the Application Priority TLV.
Status: current Access: read-write
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbxConfigDCBEnable 1.3.6.1.4.1.12740.19.1.1.1.40
Indicates whether or not DCB is enabled for this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigDCBX101Enable 1.3.6.1.4.1.12740.19.1.1.1.41
Indicates whether or not the transmit of DCBX 1.01 TLVs is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigDCBXIEEEDraftEnable 1.3.6.1.4.1.12740.19.1.1.1.42
Indicates whether or not the transmit of DCBX IEEE 802.1Qaz draft TLVs is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbxConfigQcnSubtype 1.3.6.1.4.1.12740.19.1.1.1.43
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxConfigETSConSubtype 1.3.6.1.4.1.12740.19.1.1.1.44
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxConfigETSRecoSubtype 1.3.6.1.4.1.12740.19.1.1.1.45
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxConfigPFCSubtype 1.3.6.1.4.1.12740.19.1.1.1.46
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxConfigAppPrioritySubtype 1.3.6.1.4.1.12740.19.1.1.1.47
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxConfigTCSupportedSubtype 1.3.6.1.4.1.12740.19.1.1.1.48
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  EqlIEEEDraftSubtypeValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri0 1.3.6.1.4.1.12740.19.1.1.1.49
Indicates the traffic class group to which priority 0 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri1 1.3.6.1.4.1.12740.19.1.1.1.50
Indicates the traffic class group to which priority 1 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri2 1.3.6.1.4.1.12740.19.1.1.1.51
Indicates the traffic class group to which priority 2 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri3 1.3.6.1.4.1.12740.19.1.1.1.52
Indicates the traffic class group to which priority 3 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri4 1.3.6.1.4.1.12740.19.1.1.1.53
Indicates the traffic class group to which priority 4 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri5 1.3.6.1.4.1.12740.19.1.1.1.54
Indicates the traffic class group to which priority 5 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri6 1.3.6.1.4.1.12740.19.1.1.1.55
Indicates the traffic class group to which priority 6 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxAdminETSRecoTrafficClassGroupPri7 1.3.6.1.4.1.12740.19.1.1.1.56
Indicates the traffic class group to which priority 7 is to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbCnGlobalMasterEnable 1.3.6.1.4.1.12740.19.1.1.1.57
The state of the congestion notification feature on this bridge component or system. If true, Congestion notification is enabled, and if false, congestion notification is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpPortPriMaxRps 1.3.6.1.4.1.12740.19.1.1.1.58
An integer controlling the maximum number of Reaction Points allowed for this CNPV on this Port. An end station SHALL not create more than this many Reaction Point on this Port, but it MAY create fewer.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

eqlDcbCnRpgEnablePri0 1.3.6.1.4.1.12740.19.1.1.1.59
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri1 1.3.6.1.4.1.12740.19.1.1.1.60
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri2 1.3.6.1.4.1.12740.19.1.1.1.61
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri3 1.3.6.1.4.1.12740.19.1.1.1.62
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri4 1.3.6.1.4.1.12740.19.1.1.1.63
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri5 1.3.6.1.4.1.12740.19.1.1.1.64
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri6 1.3.6.1.4.1.12740.19.1.1.1.65
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgEnablePri7 1.3.6.1.4.1.12740.19.1.1.1.66
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlDcbCnRpgTimeReset 1.3.6.1.4.1.12740.19.1.1.1.67
This object controls the value for all of the state machine variables, rpgTimeReset, used to reset the timers RpWhile.
Status: current Access: read-write
OBJECT-TYPE    
  TimeInterval  

eqlDcbCnRpgByteReset 1.3.6.1.4.1.12740.19.1.1.1.68
This object controls the value for all of the state machine variables, rpgByteReset, used to reset the counters rpByteCount.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbCnRpgThreshold 1.3.6.1.4.1.12740.19.1.1.1.69
This object controls the number of times rpByteStage or rpTimeStage can count before the RP rate control state machine advances states.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbCnRpgMaxRate 1.3.6.1.4.1.12740.19.1.1.1.70
This object controls the maximum rate, in multiples of 1 Mbit/s, at which an RP can transmit. Default value is the speed of the port. A system SHALL support a minimim value for this object that is no larger than 5 Mbits/s (object value 5). This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbCnRpgAiRate 1.3.6.1.4.1.12740.19.1.1.1.71
This object controls the transmission rate increment in the RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mbit/s. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbCnRpgHaiRate 1.3.6.1.4.1.12740.19.1.1.1.72
This object controls the transmission rate increment in the RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mbit/s. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbCnRpgGd 1.3.6.1.4.1.12740.19.1.1.1.73
This object controls the number of bits that the value of the Quantized Feedback field received in a CNM PDU is shifted to the right to decrease rpTargetRate. rpgGd is thus 2 to the negative power of this object, e.g., 7 means rpgGd = 1/128.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlDcbCnRpgMinDecFac 1.3.6.1.4.1.12740.19.1.1.1.74
This object controls the minimum factor by which the current RP transmit rate rpCurrentRate can be changed by reception of a Congestion Notification Message. Its integer value represents a percentage, from 1% to 100%.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

eqlDcbCnRpgMinRate 1.3.6.1.4.1.12740.19.1.1.1.75
This object controls the minimum transmission rate (rpgMinRate) in multiples of 1 Mbit/s. A system SHALL support a value for this object that is no larger than 5 Mbit/s per second. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlDcbDefaultiSCSIPriority 1.3.6.1.4.1.12740.19.1.1.1.76
The default priority value used for iSCSI when no priority value is negotiated through DCBX.
Status: current Access: read-write
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbDefaultFCoEPriority 1.3.6.1.4.1.12740.19.1.1.1.77
The default priority value used for FCoE when no priority value is negotiated through DCBX.
Status: current Access: read-write
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbxAdminETSConTsaTc0 1.3.6.1.4.1.12740.19.1.1.1.78
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc1 1.3.6.1.4.1.12740.19.1.1.1.79
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc2 1.3.6.1.4.1.12740.19.1.1.1.80
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc3 1.3.6.1.4.1.12740.19.1.1.1.81
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc4 1.3.6.1.4.1.12740.19.1.1.1.82
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc5 1.3.6.1.4.1.12740.19.1.1.1.83
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc6 1.3.6.1.4.1.12740.19.1.1.1.84
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSConTsaTc7 1.3.6.1.4.1.12740.19.1.1.1.85
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc0 1.3.6.1.4.1.12740.19.1.1.1.86
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc1 1.3.6.1.4.1.12740.19.1.1.1.87
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc2 1.3.6.1.4.1.12740.19.1.1.1.88
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc3 1.3.6.1.4.1.12740.19.1.1.1.89
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc4 1.3.6.1.4.1.12740.19.1.1.1.90
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc5 1.3.6.1.4.1.12740.19.1.1.1.91
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc6 1.3.6.1.4.1.12740.19.1.1.1.92
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxAdminETSRecoTsaTc7 1.3.6.1.4.1.12740.19.1.1.1.93
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-write
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbDynamicIfTable 1.3.6.1.4.1.12740.19.1.2
EqualLogic-Dynamic A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlDcbDynamicIfEntry

eqlDcbDynamicIfEntry 1.3.6.1.4.1.12740.19.1.2.1
An entry in the DCB table, containing information about DCB on a single interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlDcbDynamicIfEntry  

eqlDcbPfcRequestsSent 1.3.6.1.4.1.12740.19.1.2.1.1
A count of the invoked PFC M_CONTROL.request primitives.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eqlDcbPfcIndicationsReceived 1.3.6.1.4.1.12740.19.1.2.1.2
A count of the received PFC M_CONTROL.indication primitives.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eqlDcbxLocTCSupported 1.3.6.1.4.1.12740.19.1.2.1.3
This field is deprecated.
Status: deprecated Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxLocETSConMaxTCG 1.3.6.1.4.1.12740.19.1.2.1.4
Indicates the number of Traffic Class Groups supported on the local system. A value of 0 indicates that 8 Traffic Class Groups are supported.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxLocETSConWilling 1.3.6.1.4.1.12740.19.1.2.1.5
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocETSConTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.2.1.6
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.2.1.7
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxLocPFCWilling 1.3.6.1.4.1.12740.19.1.2.1.8
Indicates if the local system is willing to accept the PFC configuration of the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCMBC 1.3.6.1.4.1.12740.19.1.2.1.9
Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCCap 1.3.6.1.4.1.12740.19.1.2.1.10
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic classes may have PFC enabled.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxLocAppPriorityWilling 1.3.6.1.4.1.12740.19.1.2.1.11
Indicates if the local system is willing to accept the Application Priority configuration of the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxRemTCSupported 1.3.6.1.4.1.12740.19.1.2.1.12
This field is deprecated.
Status: deprecated Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxRemETSConMaxTCG 1.3.6.1.4.1.12740.19.1.2.1.13
Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxRemETSConWilling 1.3.6.1.4.1.12740.19.1.2.1.14
Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxRemETSConTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.2.1.15
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxRemETSRecoTrafficClassGroupBandwidthTable 1.3.6.1.4.1.12740.19.1.2.1.16
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

eqlDcbxRemPFCWilling 1.3.6.1.4.1.12740.19.1.2.1.17
Indicates if the remote system is willing to accept the PFC configuration of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxRemPFCMBC 1.3.6.1.4.1.12740.19.1.2.1.18
Indicates if the remote system is capable of bypassing MACSEC processing when MACSEC is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxRemPFCCap 1.3.6.1.4.1.12740.19.1.2.1.19
Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic classes may have PFC enabled.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxSupportedCapacity  

eqlDcbxRemAppPriorityWilling 1.3.6.1.4.1.12740.19.1.2.1.20
Indicates if the remote system is willing to accept the Application Priority configuration of the local system.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocETSConTrafficClassGroupPri0 1.3.6.1.4.1.12740.19.1.2.1.21
Indicates the traffic class group to which priority 0 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri1 1.3.6.1.4.1.12740.19.1.2.1.22
Indicates the traffic class group to which priority 1 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri2 1.3.6.1.4.1.12740.19.1.2.1.23
Indicates the traffic class group to which priority 2 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri3 1.3.6.1.4.1.12740.19.1.2.1.24
Indicates the traffic class group to which priority 3 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri4 1.3.6.1.4.1.12740.19.1.2.1.25
Indicates the traffic class group to which priority 4 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri5 1.3.6.1.4.1.12740.19.1.2.1.26
Indicates the traffic class group to which priority 5 is to be assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri6 1.3.6.1.4.1.12740.19.1.2.1.27
Indicates the traffic class group to which priority 6 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocETSConTrafficClassGroupPri7 1.3.6.1.4.1.12740.19.1.2.1.28
Indicates the traffic class group to which priority 7 is assigned.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTrafficClassGroupValue  

eqlDcbxLocPFCEnableEnabledPri0 1.3.6.1.4.1.12740.19.1.2.1.29
Indicates if PFC is enabled on priority 0
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri1 1.3.6.1.4.1.12740.19.1.2.1.30
Indicates if PFC is enabled on priority 1
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri2 1.3.6.1.4.1.12740.19.1.2.1.31
Indicates if PFC is enabled on priority 2
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri3 1.3.6.1.4.1.12740.19.1.2.1.32
Indicates if PFC is enabled on priority 3
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri4 1.3.6.1.4.1.12740.19.1.2.1.33
Indicates if PFC is enabled on priority 4
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri5 1.3.6.1.4.1.12740.19.1.2.1.34
Indicates if PFC is enabled on priority 5
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri6 1.3.6.1.4.1.12740.19.1.2.1.35
Indicates if PFC is enabled on priority 6
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocPFCEnableEnabledPri7 1.3.6.1.4.1.12740.19.1.2.1.36
Indicates if PFC is enabled on priority 7
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlDcbxLocVLANId 1.3.6.1.4.1.12740.19.1.2.1.37
VLAN ID to use for DCB.
Status: current Access: read-only
OBJECT-TYPE    
  EqlVlanIdentifier  

eqlDcbxLocVLANState 1.3.6.1.4.1.12740.19.1.2.1.38
State of VLAN tagging.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxVlanState  

eqlDcbxLocDCBState 1.3.6.1.4.1.12740.19.1.2.1.39
Current state of DCB.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxState  

eqlDcbxLocPFCState 1.3.6.1.4.1.12740.19.1.2.1.40
Current state of DCB feature PFC.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxState  

eqlDcbxLocETSState 1.3.6.1.4.1.12740.19.1.2.1.41
Current state of DCB feature ETS.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxState  

eqlDcbxLocQCNState 1.3.6.1.4.1.12740.19.1.2.1.42
Current state of DCB feature QCN.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxState  

eqlDcbxLociSCSIPriority 1.3.6.1.4.1.12740.19.1.2.1.43
Current iSCSI priority.
Status: current Access: read-only
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbxLocFCoEPriority 1.3.6.1.4.1.12740.19.1.2.1.44
Current state of DCB feature QCN.
Status: current Access: read-only
OBJECT-TYPE    
  EqlIEEE8021PriorityValue  

eqlDcbxLocBytesRxPri0 1.3.6.1.4.1.12740.19.1.2.1.45
Count of bytes recevied on priority 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri1 1.3.6.1.4.1.12740.19.1.2.1.46
Count of bytes recevied on priority 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri2 1.3.6.1.4.1.12740.19.1.2.1.47
Count of bytes recevied on priority 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri3 1.3.6.1.4.1.12740.19.1.2.1.48
Count of bytes recevied on priority 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri4 1.3.6.1.4.1.12740.19.1.2.1.49
Count of bytes recevied on priority 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri5 1.3.6.1.4.1.12740.19.1.2.1.50
Count of bytes recevied on priority 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri6 1.3.6.1.4.1.12740.19.1.2.1.51
Count of bytes recevied on priority 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesRxPri7 1.3.6.1.4.1.12740.19.1.2.1.52
Count of bytes recevied on priority 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri0 1.3.6.1.4.1.12740.19.1.2.1.53
Count of bytes transmitted on priority 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri1 1.3.6.1.4.1.12740.19.1.2.1.54
Count of bytes transmitted on priority 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri2 1.3.6.1.4.1.12740.19.1.2.1.55
Count of bytes transmitted on priority 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri3 1.3.6.1.4.1.12740.19.1.2.1.56
Count of bytes transmitted on priority 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri4 1.3.6.1.4.1.12740.19.1.2.1.57
Count of bytes transmitted on priority 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri5 1.3.6.1.4.1.12740.19.1.2.1.58
Count of bytes transmitted on priority 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri6 1.3.6.1.4.1.12740.19.1.2.1.59
Count of bytes transmitted on priority 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocBytesTxPri7 1.3.6.1.4.1.12740.19.1.2.1.60
Count of bytes transmitted on priority 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri0 1.3.6.1.4.1.12740.19.1.2.1.61
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri1 1.3.6.1.4.1.12740.19.1.2.1.62
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri2 1.3.6.1.4.1.12740.19.1.2.1.63
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri3 1.3.6.1.4.1.12740.19.1.2.1.64
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri4 1.3.6.1.4.1.12740.19.1.2.1.65
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri5 1.3.6.1.4.1.12740.19.1.2.1.66
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri6 1.3.6.1.4.1.12740.19.1.2.1.67
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCreatedRpsPri7 1.3.6.1.4.1.12740.19.1.2.1.68
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri0 1.3.6.1.4.1.12740.19.1.2.1.69
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri1 1.3.6.1.4.1.12740.19.1.2.1.70
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri2 1.3.6.1.4.1.12740.19.1.2.1.71
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri3 1.3.6.1.4.1.12740.19.1.2.1.72
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri4 1.3.6.1.4.1.12740.19.1.2.1.73
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri5 1.3.6.1.4.1.12740.19.1.2.1.74
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri6 1.3.6.1.4.1.12740.19.1.2.1.75
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbCnRpPortPriCentisecondsPri7 1.3.6.1.4.1.12740.19.1.2.1.76
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri0 1.3.6.1.4.1.12740.19.1.2.1.77
Number of time PFC pause frames received for priority 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri1 1.3.6.1.4.1.12740.19.1.2.1.78
Number of time PFC pause frames received for priority 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri2 1.3.6.1.4.1.12740.19.1.2.1.79
Number of time PFC pause frames received for priority 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri3 1.3.6.1.4.1.12740.19.1.2.1.80
Number of time PFC pause frames received for priority 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri4 1.3.6.1.4.1.12740.19.1.2.1.81
Number of time PFC pause frames received for priority 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri5 1.3.6.1.4.1.12740.19.1.2.1.82
Number of time PFC pause frames received for priority 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri6 1.3.6.1.4.1.12740.19.1.2.1.83
Number of time PFC pause frames received for priority 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcPausePri7 1.3.6.1.4.1.12740.19.1.2.1.84
Number of time PFC pause frames received for priority 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri0 1.3.6.1.4.1.12740.19.1.2.1.85
Number of time PFC unpause frames received for priority 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri1 1.3.6.1.4.1.12740.19.1.2.1.86
Number of time PFC unpause frames received for priority 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri2 1.3.6.1.4.1.12740.19.1.2.1.87
Number of time PFC unpause frames received for priority 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri3 1.3.6.1.4.1.12740.19.1.2.1.88
Number of time PFC unpause frames received for priority 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri4 1.3.6.1.4.1.12740.19.1.2.1.89
Number of time PFC unpause frames received for priority 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri5 1.3.6.1.4.1.12740.19.1.2.1.90
Number of time PFC unpause frames received for priority 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri6 1.3.6.1.4.1.12740.19.1.2.1.91
Number of time PFC unpause frames received for priority 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocPfcUnpausePri7 1.3.6.1.4.1.12740.19.1.2.1.92
Number of time PFC unpause frames received for priority 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlDcbxLocETSConTsaTc0 1.3.6.1.4.1.12740.19.1.2.1.93
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc1 1.3.6.1.4.1.12740.19.1.2.1.94
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc2 1.3.6.1.4.1.12740.19.1.2.1.95
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc3 1.3.6.1.4.1.12740.19.1.2.1.96
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc4 1.3.6.1.4.1.12740.19.1.2.1.97
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc5 1.3.6.1.4.1.12740.19.1.2.1.98
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc6 1.3.6.1.4.1.12740.19.1.2.1.99
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSConTsaTc7 1.3.6.1.4.1.12740.19.1.2.1.100
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc0 1.3.6.1.4.1.12740.19.1.2.1.101
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc1 1.3.6.1.4.1.12740.19.1.2.1.102
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc2 1.3.6.1.4.1.12740.19.1.2.1.103
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc3 1.3.6.1.4.1.12740.19.1.2.1.104
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc4 1.3.6.1.4.1.12740.19.1.2.1.105
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc5 1.3.6.1.4.1.12740.19.1.2.1.106
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc6 1.3.6.1.4.1.12740.19.1.2.1.107
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocETSRecoTsaTc7 1.3.6.1.4.1.12740.19.1.2.1.108
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc0 1.3.6.1.4.1.12740.19.1.2.1.109
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc1 1.3.6.1.4.1.12740.19.1.2.1.110
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc2 1.3.6.1.4.1.12740.19.1.2.1.111
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc3 1.3.6.1.4.1.12740.19.1.2.1.112
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc4 1.3.6.1.4.1.12740.19.1.2.1.113
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc5 1.3.6.1.4.1.12740.19.1.2.1.114
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc6 1.3.6.1.4.1.12740.19.1.2.1.115
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSConTsaTc7 1.3.6.1.4.1.12740.19.1.2.1.116
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc0 1.3.6.1.4.1.12740.19.1.2.1.117
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc1 1.3.6.1.4.1.12740.19.1.2.1.118
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc2 1.3.6.1.4.1.12740.19.1.2.1.119
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc3 1.3.6.1.4.1.12740.19.1.2.1.120
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc4 1.3.6.1.4.1.12740.19.1.2.1.121
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc5 1.3.6.1.4.1.12740.19.1.2.1.122
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc6 1.3.6.1.4.1.12740.19.1.2.1.123
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxRemETSRecoTsaTc7 1.3.6.1.4.1.12740.19.1.2.1.124
Indicates the transmission selection algorithm which is assigned to this traffic class.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxTransmissionSelectionAlgorithm  

eqlDcbxLocDCBMode 1.3.6.1.4.1.12740.19.1.2.1.125
Current operating mode of DCB.
Status: current Access: read-only
OBJECT-TYPE    
  EqlDcbxMode  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor