ENTERASYS-RS-232-MIB-EXT-MIB

File: ENTERASYS-RS-232-MIB-EXT-MIB.mib (8241 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RS-232-MIB P-BRIDGE-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
rs232PortEntry EnabledStatus etsysModules

Defined Types

EtsysRs232Vt100ExtEntry  
SEQUENCE    
  etsysRs232Vt100DsrEnableState EnabledStatus
  etsysRs232Vt100DsrTimeout Integer32

EtsysRs232CtsLinkExtEntry  
SEQUENCE    
  etsysRs232CtsLinkEnableState EnabledStatus

Defined Values

etsysRs232MibExtMIB 1.3.6.1.4.1.5624.1.2.77
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry standard RS232-MIB.
MODULE-IDENTITY    

etsysRs232MibExtObjects 1.3.6.1.4.1.5624.1.2.77.1
OBJECT IDENTIFIER    

etsysRs232MibExtVt100 1.3.6.1.4.1.5624.1.2.77.1.1
OBJECT IDENTIFIER    


etsysRs232Vt100ExtTable 1.3.6.1.4.1.5624.1.2.77.1.1.1
A table of per interface information that extends the general rs232 port table defined in RFC1659.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysRs232Vt100ExtEntry

etsysRs232Vt100ExtEntry 1.3.6.1.4.1.5624.1.2.77.1.1.1.1
An entry containing per interface information.
OBJECT-TYPE    
  EtsysRs232Vt100ExtEntry  

etsysRs232Vt100DsrEnableState 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.1
This object indicates the current enabled status for transmitting a VT100 Device Status Request (DSR) to an attached terminal.
OBJECT-TYPE    
  EnabledStatus  

etsysRs232Vt100DsrTimeout 1.3.6.1.4.1.5624.1.2.77.1.1.1.1.2
This object indicates the current timeout value in seconds to wait for a reply to a Device Status Request VT100 ANSI escape sequence.
OBJECT-TYPE    
  Integer32  

etsysRs232CtsLinkExtTable 1.3.6.1.4.1.5624.1.2.77.1.2.1
A table of per interface information that extends the general rs232 port table defined in RFC1659.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysRs232CtsLinkExtEntry

etsysRs232CtsLinkExtEntry 1.3.6.1.4.1.5624.1.2.77.1.2.1.1
An entry containing per interface information.
OBJECT-TYPE    
  EtsysRs232CtsLinkExtEntry  

etsysRs232CtsLinkEnableState 1.3.6.1.4.1.5624.1.2.77.1.2.1.1.1
This object indicates the current enabled status for utilizing the Clear To Send input signal as a physical link indication.
OBJECT-TYPE    
  EnabledStatus  

etsysRs232MibExtConformance 1.3.6.1.4.1.5624.1.2.77.2
OBJECT IDENTIFIER    

etsysRs232MibExtGroups 1.3.6.1.4.1.5624.1.2.77.2.1
OBJECT IDENTIFIER    

etsysRs232MibExtCompliances 1.3.6.1.4.1.5624.1.2.77.2.2
OBJECT IDENTIFIER    

etsysRs232MibExtVt100DsrGroup 1.3.6.1.4.1.5624.1.2.77.2.1.1
The group that controls the operational properties of the a VT100 Device Status ANSI escape sequence exchange between a RS-232-like host and terminal.
OBJECT-GROUP    

etsysRs232MibExtCtsLinkGroup 1.3.6.1.4.1.5624.1.2.77.2.1.2
The group that controls the operational properties of the physical link detection method utilizing the Clear To Send input signal.
OBJECT-GROUP    

etsysRs232MibExtCompliance 1.3.6.1.4.1.5624.1.2.77.2.2.1
This group is mandatory for all devices that support the VT100 Device Status ANSI escape sequence exchange between a RS-232-like host and terminal.
MODULE-COMPLIANCE    

etsysRs232MibCtsExtCompliance 1.3.6.1.4.1.5624.1.2.77.2.2.2
This group is mandatory for all devices that support the Clear To Send (CTS) physical link detection method.
MODULE-COMPLIANCE