ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB

File: ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB.mib (8350 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IEEE8023-LAG-MIB
P-BRIDGE-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP dot3adAggPortEntry EnabledStatus
etsysModules

Defined Types

EtsysDot3adAggPortEntry  
SEQUENCE    
  etsysDot3adAggPortEnable INTEGER

Defined Values

etsysIeee8023LagMibExtMIB 1.3.6.1.4.1.5624.1.2.35
This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to proprietary extensions to the IEEE8023-LAG-MIB as defined by the IEEE 802.3ad Working Group.
MODULE-IDENTITY    

etsysIeee8023LagMibExt 1.3.6.1.4.1.5624.1.2.35.1
OBJECT IDENTIFIER    

etsysDot3adAggGlobal 1.3.6.1.4.1.5624.1.2.35.1.1
OBJECT IDENTIFIER    

etsysDot3adAggPort 1.3.6.1.4.1.5624.1.2.35.1.2
OBJECT IDENTIFIER    

etsysDot3adAggGlobalEnable 1.3.6.1.4.1.5624.1.2.35.1.1.1
The enabled/disabled status of the IEEE 802.3ad link aggregation functionality on the managed entity. A value of disabled(2) will prevent the formation of Link Aggregations, and the transmission and processing of LACP BPDUs, however, all relevant MIBs will still be present.
OBJECT-TYPE    
  EnabledStatus  

etsysDot3adAggGlobalFormSinglePortLags 1.3.6.1.4.1.5624.1.2.35.1.1.2
The ability of forming single port Link Aggregation Groups on this entity. If enabled(1) Link Aggregation Groups can form with 1 port, otherwise 2 or more ports are required.
OBJECT-TYPE    
  EnabledStatus  

etsysDot3adAggPortTable 1.3.6.1.4.1.5624.1.2.35.1.2.1
Extensions to the table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysDot3adAggPortEntry

etsysDot3adAggPortEntry 1.3.6.1.4.1.5624.1.2.35.1.2.1.1
A list of proprietary Link Aggregation Control configuration parameters for each Aggregation Port on this device.
OBJECT-TYPE    
  EtsysDot3adAggPortEntry  

etsysDot3adAggPortEnable 1.3.6.1.4.1.5624.1.2.35.1.2.1.1.1
The enabled/disabled status of the IEEE 802.3ad link aggregation functionality on this port. A value of disabled(2) will prevent the transmission and processing of LACP BPDUs on this port.
OBJECT-TYPE    
  EnabledStatus  

etsysIeee8023LagConformance 1.3.6.1.4.1.5624.1.2.35.2
OBJECT IDENTIFIER    

etsysIeee8023LagGroups 1.3.6.1.4.1.5624.1.2.35.2.1
OBJECT IDENTIFIER    

etsysIeee8023LagCompliances 1.3.6.1.4.1.5624.1.2.35.2.2
OBJECT IDENTIFIER    

etsysDot3adAggGlobalGroup 1.3.6.1.4.1.5624.1.2.35.2.1.1
A collection of objects relating to the User Priority applicable to each port.
OBJECT-GROUP    

etsysDot3adAggPortGroup 1.3.6.1.4.1.5624.1.2.35.2.1.2
A collection of objects relating to proprietary per port configuration.
OBJECT-GROUP    

etsysDot3adAggGlobalSinglePortGroup 1.3.6.1.4.1.5624.1.2.35.2.1.3
A collection of objects relating to forming LAG groups with single ports.
OBJECT-GROUP    

etsysIeee8023LagCompliance 1.3.6.1.4.1.5624.1.2.35.2.2.1
Support for this group is optional and only applies to products that wish to support the formation of single port Link Aggregation Groups.
MODULE-COMPLIANCE