ENGENIUS-MESH-MIB

File: ENGENIUS-MESH-MIB.mib (187907 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RFC1213-MIB INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
OBJECT-IDENTITY enterprises IpAddress
Counter32 Gauge32 TimeTicks
Integer32 Counter64 DisplayString
MacAddress TruthValue TimeStamp
TimeInterval DateAndTime RowStatus
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
ifIndex InetAddressType InetAddress

Defined Types

EthernetInterfaceTableEntry  
SEQUENCE    
  ethInterfaceTableIndex Integer32
  ethInterfaceTableName OCTET STRING
  ethInterfaceTableBase OCTET STRING
  ethInterfaceTableMac MacAddress
  ethInterfaceTableBridge OCTET STRING
  ethInterfaceTableBridgeCost Integer32
  ethInterfaceTableBridgePrio Integer32
  ethInterfaceTableComments DisplayString
  ethInterfaceTableActive INTEGER
  ethInterfaceTableRowStatus RowStatus

WirelessInterfaceTableEntry  
SEQUENCE    
  wlanInterfaceTableIndex Integer32
  wlanInterfaceTableName OCTET STRING
  wlanInterfaceTableBase OCTET STRING
  wlanInterfaceTableBridge OCTET STRING
  wlanInterfaceTableBridgeCost Integer32
  wlanInterfaceTableBridgePrio Integer32
  wlanInterfaceTableMode INTEGER
  wlanInterfaceTableBand INTEGER
  wlanInterfaceTableEssid DisplayString
  wlanInterfaceTableFreq Integer32
  wlanInterfaceTableMac MacAddress
  wlanInterfaceTableSecurity INTEGER
  wlanInterfaceTableWpaType INTEGER
  wlanInterfaceTableDot1x INTEGER
  wlanInterfaceTableEncryptionKey OCTET STRING
  wlanInterfaceTableBroadcastSsid INTEGER
  wlanInterfaceTableBeaconInt Integer32
  wlanInterfaceTableRtsThreshold Integer32
  wlanInterfaceTableFragThreshold Integer32
  wlanInterfaceTableDtimInterval Integer32
  wlanInterfaceTableDatarate Integer32
  wlanInterfaceTableDiversity INTEGER
  wlanInterfaceTableTxAntenna INTEGER
  wlanInterfaceTableRxAntenna INTEGER
  wlanInterfaceTableCrntTxPower Integer32
  wlanInterfaceTableTxPower Integer32
  wlanInterfaceTableSeperation INTEGER
  wlanInterfaceTableComments DisplayString
  wlanInterfaceTableActive INTEGER
  wlanInterfaceTableRowStatus RowStatus

WirelessFrequencyMeshTableEntry  
SEQUENCE    
  wlanFrequencyMeshTableIndex Integer32
  wlanFrequencyMeshTableChannel Integer32
  wlanFrequencyMeshTableFrequency OCTET STRING
  wlanFrequencyMeshTableRowStatus RowStatus

WirelessFrequencyAp0TableEntry  
SEQUENCE    
  wlanFrequencyAp0TableIndex Integer32
  wlanFrequencyAp0TableChannel Integer32
  wlanFrequencyAp0TableFrequency OCTET STRING
  wlanFrequencyAp0TableRowStatus RowStatus

WirelessFrequencyAp1TableEntry  
SEQUENCE    
  wlanFrequencyAp1TableIndex Integer32
  wlanFrequencyAp1TableChannel Integer32
  wlanFrequencyAp1TableFrequency OCTET STRING
  wlanFrequencyAp1TableRowStatus RowStatus

VlanInterfaceTableEntry  
SEQUENCE    
  vlanInterfaceTableIndex Integer32
  vlanInterfaceTableName OCTET STRING
  vlanInterfaceTableBase OCTET STRING
  vlanInterfaceTableMac MacAddress
  vlanInterfaceTableId Integer32
  vlanInterfaceTableBridge OCTET STRING
  vlanInterfaceTableBridgeCost Integer32
  vlanInterfaceTableBridgePrio Integer32
  vlanInterfaceTableComments DisplayString
  vlanInterfaceTableActive INTEGER
  vlanInterfaceTableRowStatus RowStatus

BridgeInterfaceTableEntry  
SEQUENCE    
  bridgeInterfaceTableIndex Integer32
  bridgeInterfaceTableName OCTET STRING
  bridgeInterfaceTableMac MacAddress
  bridgeInterfaceTableAge Integer32
  bridgeInterfaceTablePrio Integer32
  bridgeInterfaceTableFwdDelay Integer32
  bridgeInterfaceTableHelloInt Integer32
  bridgeInterfaceTableMaxAge Integer32
  bridgeInterfaceTableStp INTEGER
  bridgeInterfaceTableComments DisplayString
  bridgeInterfaceTableActive INTEGER
  bridgeInterfaceTableRowStatus RowStatus

IpAddressesTableEntry  
SEQUENCE    
  ipAddressesTableIndex Integer32
  ipAddressesTableIface OCTET STRING
  ipAddressesTableType INTEGER
  ipAddressesTableIp IpAddress
  ipAddressesTableNetmask IpAddress
  ipAddressesTableBroadcast IpAddress
  ipAddressesTableGateway IpAddress
  ipAddressesTableRouted INTEGER
  ipAddressesTableComments DisplayString
  ipAddressesTableActive INTEGER
  ipAddressesTableRowStatus RowStatus

OlsrInterfaceTableEntry  
SEQUENCE    
  olsrInterfaceTableIndex Integer32
  olsrInterfaceTableIface OCTET STRING
  olsrInterfaceTableHelloInterval OCTET STRING
  olsrInterfaceTableHelloValidity OCTET STRING
  olsrInterfaceTableTcInterval OCTET STRING
  olsrInterfaceTableTcValidity OCTET STRING
  olsrInterfaceTableMidInterval OCTET STRING
  olsrInterfaceTableMidValidity OCTET STRING
  olsrInterfaceTableHnaInterval OCTET STRING
  olsrInterfaceTableHnaValidity OCTET STRING
  olsrInterfaceTableComments DisplayString
  olsrInterfaceTableActive INTEGER
  olsrInterfaceTableRowStatus RowStatus

OlsrGatewayTableEntry  
SEQUENCE    
  olsrGatewayTableIndex Integer32
  olsrGatewayTableSubnet IpAddress
  olsrGatewayTableNetmask IpAddress
  olsrGatewayTableComments DisplayString
  olsrGatewayTableActive INTEGER
  olsrGatewayTableRowStatus RowStatus

RouteTableEntry  
SEQUENCE    
  routeTableIndex Integer32
  routeTableSubnet IpAddress
  routeTableNetmask IpAddress
  routeTableGateway IpAddress
  routeTableDevice OCTET STRING
  routeTableDirect INTEGER
  routeTableComments DisplayString
  routeTableActive INTEGER
  routeTableRowStatus RowStatus

NtpTableEntry  
SEQUENCE    
  ntpTableIndex Integer32
  ntpTableServer OCTET STRING
  ntpTableMinPoll Integer32
  ntpTableMaxPoll Integer32
  ntpTableComments DisplayString
  ntpTableActive INTEGER
  ntpTableRowStatus RowStatus

DhcpdTableEntry  
SEQUENCE    
  dhcpdTableIndex Integer32
  dhcpdTableIface OCTET STRING
  dhcpdTableSubnet IpAddress
  dhcpdTableNetstart IpAddress
  dhcpdTableNetend IpAddress
  dhcpdTableNetmask IpAddress
  dhcpdTableMaxLease Integer32
  dhcpdTableLease Integer32
  dhcpdTableDomain OCTET STRING
  dhcpdTableDns IpAddress
  dhcpdTableRouter IpAddress
  dhcpdTableComments DisplayString
  dhcpdTableActive INTEGER
  dhcpdTableRowStatus RowStatus

DhcpClientTableEntry  
SEQUENCE    
  dhcpClientTableIndex Integer32
  dhcpClientTableIp IpAddress
  dhcpClientTableMac MacAddress
  dhcpClientTableHostname DisplayString

DnsTableEntry  
SEQUENCE    
  dnsTableIndex Integer32
  dnsTableDns OCTET STRING
  dnsTableIpaddress IpAddress
  dnsTableComments DisplayString
  dnsTableActive INTEGER
  dnsTableRowStatus RowStatus

TopologyTableEntry  
SEQUENCE    
  topologyTableIndex Integer32
  topologyTableSource OCTET STRING
  topologyTableDestination OCTET STRING
  topologyTableLabel OCTET STRING
  topologyTableStyle OCTET STRING

FirewallTableEntry  
SEQUENCE    
  firewallTableIndex Integer32
  firewallTableTarget INTEGER
  firewallTableSrcIface OCTET STRING
  firewallTableDstIface OCTET STRING
  firewallTableSrcIp IpAddress
  firewallTableSrcMask IpAddress
  firewallTableDstIp IpAddress
  firewallTableDstMask IpAddress
  firewallTableProtocol Integer32
  firewallTableStartPort Integer32
  firewallTableEndPort Integer32
  firewallTableUserGroup Integer32
  firewallTableComment DisplayString
  firewallTableActive INTEGER
  firewallTableRowStatus RowStatus

MacaccessTableEntry  
SEQUENCE    
  macaccessTableIndex Integer32
  macaccessTableMac MacAddress
  macaccessTableType INTEGER
  macaccessTableComment DisplayString
  macaccessTableActive INTEGER
  macaccessTableRowStatus RowStatus

MacActiveTableEntry  
SEQUENCE    
  macActiveTableIndex Integer32
  macActiveTableMac MacAddress
  macActiveTableIp IpAddress

NatTableEntry  
SEQUENCE    
  natTableIndex Integer32
  natTableProtocol INTEGER
  natTablePort Integer32
  natTableIp IpAddress
  natTableComment DisplayString
  natTableActive INTEGER
  natTableRowStatus RowStatus

ShapingTableEntry  
SEQUENCE    
  shapingTableIndex Integer32
  shapingTableProtocol INTEGER
  shapingTablePort Integer32
  shapingTableMinsize Integer32
  shapingTableMaxsize Integer32
  shapingTablePriority INTEGER
  shapingTableComment DisplayString
  shapingTableActive INTEGER
  shapingTableRowStatus RowStatus

PptpTableEntry  
SEQUENCE    
  pptpTableIndex Integer32
  pptpTableUsername DisplayString
  pptpTablePassword DisplayString
  pptpTableIp IpAddress
  pptpTableComment DisplayString
  pptpTableActive INTEGER
  pptpTableRowStatus RowStatus

RadiusclientTableEntry  
SEQUENCE    
  radiusclientTableIndex Integer32
  radiusclientTableServername DisplayString
  radiusclientTableServertype INTEGER
  radiusclientTableServerport Integer32
  radiusclientTableServersecret DisplayString
  radiusclientTableComment DisplayString
  radiusclientTableActive INTEGER
  radiusclientTableRowStatus RowStatus

HttpdTableEntry  
SEQUENCE    
  httpdTableIndex Integer32
  httpdTableDevice OCTET STRING
  httpdTableSubnet IpAddress
  httpdTableNetmask IpAddress
  httpdTableDevnet INTEGER
  httpdTableComment DisplayString
  httpdTableActive INTEGER
  httpdTableRowStatus RowStatus

SnmpdTableEntry  
SEQUENCE    
  snmpdTableIndex Integer32
  snmpdTableDevice OCTET STRING
  snmpdTableSubnet IpAddress
  snmpdTableNetmask IpAddress
  snmpdTableDevnet INTEGER
  snmpdTableComment DisplayString
  snmpdTableActive INTEGER
  snmpdTableRowStatus RowStatus

TrapTableEntry  
SEQUENCE    
  trapTableIndex Integer32
  trapTableIp IpAddress
  trapTableCommunity DisplayString
  trapTableUsername DisplayString
  trapTableAuthpasswd DisplayString
  trapTablePrivpasswd DisplayString
  trapTableVersion INTEGER
  trapTableComment DisplayString
  trapTableActive INTEGER
  trapTableRowStatus RowStatus

SignallevelTableEntry  
SEQUENCE    
  signallevelTableIndex Integer32
  signallevelTableSource OCTET STRING
  signallevelTableDestination OCTET STRING
  signallevelTableRssi OCTET STRING

ClientInfoTableEntry  
SEQUENCE    
  clientInfoTableIndex Integer32
  clientInfoTableEssid OCTET STRING
  clientInfoTableMac OCTET STRING
  clientInfoTableChannel OCTET STRING
  clientInfoTableRate OCTET STRING
  clientInfoTableRssi OCTET STRING
  clientInfoTableIdletime OCTET STRING

ClientStatTableEntry  
SEQUENCE    
  clientStatTableIndex Integer32
  clientStatTableIp IpAddress
  clientStatTableMac MacAddress
  clientStatTableTx OCTET STRING
  clientStatTableRx OCTET STRING
  clientStatTableTxPkt OCTET STRING
  clientStatTableRxPkt OCTET STRING
  clientStatTableOnlinetime OCTET STRING

InterfacesTableEntry  
SEQUENCE    
  interfacesTableIndex Integer32
  interfacesTableDev OCTET STRING
  interfacesTableLabel OCTET STRING

MlrdTableEntry  
SEQUENCE    
  mlrdTableIndex Integer32
  mlrdTableMac MacAddress
  mlrdTableIp IpAddress
  mlrdTableParent IpAddress
  mlrdTableDefaultRoute IpAddress
  mlrdTableComment DisplayString
  mlrdTableActive INTEGER
  mlrdTableRowStatus RowStatus

WmeTableEntry  
SEQUENCE    
  wmeTableIndex Integer32
  wmeTableName OCTET STRING
  wmeTableCwminBe Integer32
  wmeTableCwminBk Integer32
  wmeTableCwminVi Integer32
  wmeTableCwminVo Integer32
  wmeTableBssCwminBe Integer32
  wmeTableBssCwminBk Integer32
  wmeTableBssCwminVi Integer32
  wmeTableBssCwminVo Integer32
  wmeTableCwmaxBe Integer32
  wmeTableCwmaxBk Integer32
  wmeTableCwmaxVi Integer32
  wmeTableCwmaxVo Integer32
  wmeTableBssCwmaxBe Integer32
  wmeTableBssCwmaxBk Integer32
  wmeTableBssCwmaxVi Integer32
  wmeTableBssCwmaxVo Integer32
  wmeTableAifsnBe Integer32
  wmeTableAifsnBk Integer32
  wmeTableAifsnVi Integer32
  wmeTableAifsnVo Integer32
  wmeTableBssAifsnBe Integer32
  wmeTableBssAifsnBk Integer32
  wmeTableBssAifsnVi Integer32
  wmeTableBssAifsnVo Integer32
  wmeTableTxoplimitBe Integer32
  wmeTableTxoplimitBk Integer32
  wmeTableTxoplimitVi Integer32
  wmeTableTxoplimitVo Integer32
  wmeTableBssTxoplimitBe Integer32
  wmeTableBssTxoplimitBk Integer32
  wmeTableBssTxoplimitVi Integer32
  wmeTableBssTxoplimitVo Integer32
  wmeTableAcmBe INTEGER
  wmeTableAcmBk INTEGER
  wmeTableAcmVi INTEGER
  wmeTableAcmVo INTEGER
  wmeTableNoackpolicyBe INTEGER
  wmeTableNoackpolicyBk INTEGER
  wmeTableNoackpolicyVi INTEGER
  wmeTableNoackpolicyVo INTEGER
  wmeTableComment DisplayString
  wmeTableActive INTEGER
  wmeTableRowStatus RowStatus

NmsAddressTableEntry  
SEQUENCE    
  nmsAddressTableIndex Integer32
  nmsAddressTableAddress DisplayString
  nmsAddressTablePort Integer32
  nmsAddressTableInterval Integer32
  nmsAddressTableComment DisplayString
  nmsAddressTableActive INTEGER
  nmsAddressTableRowStatus RowStatus

UserDbTableEntry  
SEQUENCE    
  userDbTableIndex Integer32
  userDbTableName DisplayString
  userDbTablePassword DisplayString
  userDbTableGid Integer32
  userDbTableStatus INTEGER

UserGroupTableEntry  
SEQUENCE    
  userGroupTableIndex Integer32
  userGroupTableGid Integer32
  userGroupTableName DisplayString
  userGroupTableLanguage DisplayString
  userGroupTableUpload Integer32
  userGroupTableDownload Integer32
  userGroupTableIdleTimeout Integer32
  userGroupTableSessTimeout Integer32
  userGroupTableUrl DisplayString
  userGroupTableComment DisplayString

DhcrelayTableEntry  
SEQUENCE    
  dhcrelayTableIndex Integer32
  dhcrelayTableType INTEGER
  dhcrelayTableExtra DisplayString
  dhcrelayTableComments DisplayString
  dhcrelayTableActive INTEGER
  dhcrelayTableRowStatus RowStatus

EbTableEntry  
SEQUENCE    
  ebTableIndex Integer32
  ebTableTarget INTEGER
  ebTableSrcIface OCTET STRING
  ebTableDstIface OCTET STRING
  ebTableMatchMac INTEGER
  ebTableSrcMac MacAddress
  ebTableDstMac MacAddress
  ebTableProtocol INTEGER
  ebTableSrcIp IpAddress
  ebTableSrcMask IpAddress
  ebTableDstIp IpAddress
  ebTableDstMask IpAddress
  ebTableIpProt INTEGER
  ebTableSrcPortStart Integer32
  ebTableSrcPortEnd Integer32
  ebTableDstPortStart Integer32
  ebTableDstPortEnd Integer32
  ebTableVlanid Integer32
  ebTableComments DisplayString
  ebTableActive INTEGER
  ebTableRowStatus RowStatus

Defined Values

engeniusmesh 1.3.6.1.4.1.14125.1
MIB Definition used in the Engenius Mesh Product Line: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). engenius(14125).engeniusmesh(1)
MODULE-IDENTITY    

engenius 1.3.6.1.4.1.14125
OBJECT IDENTIFIER    

nodeStatus 1.3.6.1.4.1.14125.1.1
OBJECT IDENTIFIER    

nodeConfiguration 1.3.6.1.4.1.14125.1.2
OBJECT IDENTIFIER    

nodeCommand 1.3.6.1.4.1.14125.1.3
OBJECT IDENTIFIER    

nodeStatusSystem 1.3.6.1.4.1.14125.1.1.1
OBJECT IDENTIFIER    

nodeStatusTrap 1.3.6.1.4.1.14125.1.1.2
OBJECT IDENTIFIER    

nodeConfigurationSystem 1.3.6.1.4.1.14125.1.2.1
OBJECT IDENTIFIER    

nodeConfigurationEthernet 1.3.6.1.4.1.14125.1.2.2
OBJECT IDENTIFIER    

nodeConfigurationWireless 1.3.6.1.4.1.14125.1.2.3
OBJECT IDENTIFIER    

nodeConfigurationVlan 1.3.6.1.4.1.14125.1.2.4
OBJECT IDENTIFIER    

nodeConfigurationBridge 1.3.6.1.4.1.14125.1.2.5
OBJECT IDENTIFIER    

nodeConfigurationIpaddress 1.3.6.1.4.1.14125.1.2.6
OBJECT IDENTIFIER    

nodeConfigurationNetwork 1.3.6.1.4.1.14125.1.2.7
OBJECT IDENTIFIER    

nodeConfigurationSyslog 1.3.6.1.4.1.14125.1.2.8
OBJECT IDENTIFIER    

nodeConfigurationOlsr 1.3.6.1.4.1.14125.1.2.9
OBJECT IDENTIFIER    

nodeConfigurationRoute 1.3.6.1.4.1.14125.1.2.10
OBJECT IDENTIFIER    

nodeConfigurationNtp 1.3.6.1.4.1.14125.1.2.11
OBJECT IDENTIFIER    

nodeConfigurationDhcpd 1.3.6.1.4.1.14125.1.2.12
OBJECT IDENTIFIER    

nodeConfigurationDns 1.3.6.1.4.1.14125.1.2.13
OBJECT IDENTIFIER    

nodeConfigurationTopology 1.3.6.1.4.1.14125.1.2.14
OBJECT IDENTIFIER    

nodeConfigurationFirewall 1.3.6.1.4.1.14125.1.2.15
OBJECT IDENTIFIER    

nodeConfigurationMacaccess 1.3.6.1.4.1.14125.1.2.16
OBJECT IDENTIFIER    

nodeConfigurationNat 1.3.6.1.4.1.14125.1.2.17
OBJECT IDENTIFIER    

nodeConfigurationOlsrGW 1.3.6.1.4.1.14125.1.2.18
OBJECT IDENTIFIER    

nodeConfigurationShaping 1.3.6.1.4.1.14125.1.2.19
OBJECT IDENTIFIER    

nodeConfigurationPppoe 1.3.6.1.4.1.14125.1.2.20
OBJECT IDENTIFIER    

nodeConfigurationPptp 1.3.6.1.4.1.14125.1.2.21
OBJECT IDENTIFIER    

nodeConfigurationTmipd 1.3.6.1.4.1.14125.1.2.22
OBJECT IDENTIFIER    

nodeConfigurationCaptive 1.3.6.1.4.1.14125.1.2.23
OBJECT IDENTIFIER    

nodeConfigurationRadiusClient 1.3.6.1.4.1.14125.1.2.24
OBJECT IDENTIFIER    

nodeConfigurationHttpd 1.3.6.1.4.1.14125.1.2.25
OBJECT IDENTIFIER    

nodeConfigurationSnmpd 1.3.6.1.4.1.14125.1.2.26
OBJECT IDENTIFIER    

nodeConfigurationTrap 1.3.6.1.4.1.14125.1.2.27
OBJECT IDENTIFIER    

nodeConfigurationDdns 1.3.6.1.4.1.14125.1.2.28
OBJECT IDENTIFIER    

nodeConfigurationZeroconfig 1.3.6.1.4.1.14125.1.2.29
OBJECT IDENTIFIER    

nodeConfigurationSignallevel 1.3.6.1.4.1.14125.1.2.30
OBJECT IDENTIFIER    

nodeConfigurationIpsec 1.3.6.1.4.1.14125.1.2.31
OBJECT IDENTIFIER    

nodeConfigurationL2tpc 1.3.6.1.4.1.14125.1.2.32
OBJECT IDENTIFIER    

nodeConfigurationAutoip 1.3.6.1.4.1.14125.1.2.33
OBJECT IDENTIFIER    

nodeConfigurationInterfaces 1.3.6.1.4.1.14125.1.2.34
OBJECT IDENTIFIER    

nodeConfigurationMlrd 1.3.6.1.4.1.14125.1.2.35
OBJECT IDENTIFIER    

nodeConfigurationRoutedog 1.3.6.1.4.1.14125.1.2.36
OBJECT IDENTIFIER    

nodeConfigurationLinuxdog 1.3.6.1.4.1.14125.1.2.37
OBJECT IDENTIFIER    

nodeConfigurationAdvTunning 1.3.6.1.4.1.14125.1.2.38
OBJECT IDENTIFIER    

nodeConfigurationSshd 1.3.6.1.4.1.14125.1.2.39
OBJECT IDENTIFIER    

nodeConfigutationWme 1.3.6.1.4.1.14125.1.2.40
OBJECT IDENTIFIER    

nodeConfigurationTm75 1.3.6.1.4.1.14125.1.2.41
OBJECT IDENTIFIER    

nodeConfigurationNmsAddress 1.3.6.1.4.1.14125.1.2.42
OBJECT IDENTIFIER    

nodeConfigurationUserDb 1.3.6.1.4.1.14125.1.2.43
OBJECT IDENTIFIER    

nodeConfigurationUserGroup 1.3.6.1.4.1.14125.1.2.44
OBJECT IDENTIFIER    

nodeConfigurationStatickey 1.3.6.1.4.1.14125.1.2.45
OBJECT IDENTIFIER    

nodeConfigurationDhcrelay 1.3.6.1.4.1.14125.1.2.46
OBJECT IDENTIFIER    

nodeConfigurationMulticast 1.3.6.1.4.1.14125.1.2.47
OBJECT IDENTIFIER    

nodeConfigurationOspfd 1.3.6.1.4.1.14125.1.2.48
OBJECT IDENTIFIER    

nodeConfigurationEbtables 1.3.6.1.4.1.14125.1.2.49
OBJECT IDENTIFIER    

nodeCommandReboot 1.3.6.1.4.1.14125.1.3.1
OBJECT IDENTIFIER    

nodeCommandReset 1.3.6.1.4.1.14125.1.3.2
OBJECT IDENTIFIER    

nodeCommandUpload 1.3.6.1.4.1.14125.1.3.3
OBJECT IDENTIFIER    

nodeCommandLogoutBlock 1.3.6.1.4.1.14125.1.3.4
OBJECT IDENTIFIER    

nodeCommandRestartSnmp 1.3.6.1.4.1.14125.1.3.5
OBJECT IDENTIFIER    

systemUptime 1.3.6.1.4.1.14125.1.1.1.1
This object represents the value of sysUpTime from the time the station entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

systemMemory 1.3.6.1.4.1.14125.1.1.1.2
This object represent the percentage of the system free memory.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

systemDevicename 1.3.6.1.4.1.14125.1.1.1.3
This object represents the name of the system device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

systemCheckingState 1.3.6.1.4.1.14125.1.1.1.4
Check is dorado system
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapVariable 1.3.6.1.4.1.14125.1.1.2.1
OBJECT IDENTIFIER    

genericTrapVariable 1.3.6.1.4.1.14125.1.1.2.1.1
This object is used to provide additional information on traps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

genericTrapVarMACAddress 1.3.6.1.4.1.14125.1.1.2.1.2
This object is used to store the MAC address of the device that has sent a trap.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

genericTrapVarHostIPAddress 1.3.6.1.4.1.14125.1.1.2.1.3
This object is used to store the IP Address of the Host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

genericTrapVarHostname 1.3.6.1.4.1.14125.1.1.2.1.4
This object is used to store the hostname of the system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

genericTrapVarInterface 1.3.6.1.4.1.14125.1.1.2.1.5
This object is used to store the interface number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

genericTrapVarWirelessCard 1.3.6.1.4.1.14125.1.1.2.1.6
This object is used to determine on which Wireless Card, Card A or Card B, a wireless TRAP has occured on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cardA(1), cardB(2)  

genericTrapVarEthernetPort 1.3.6.1.4.1.14125.1.1.2.1.7
This object is used to determine on which ethernet port, port A or port B, a TRAP has occured on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethPortA(1), ethPortB(2)  

genericTrapVarCount 1.3.6.1.4.1.14125.1.1.2.1.8
This object is used to store the number of occurance of certain events.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

adminTraps 1.3.6.1.4.1.14125.1.1.2.2
This is the administrator related trap group.
Status: current Access: read-only
OBJECT-IDENTITY    

adminTrapsAdminConf 1.3.6.1.4.1.14125.1.1.2.2.1
This traps is generated when the administrator configures any of the web configuration page. Trap Severity Level: Informative.
Status: current Access: read-only
NOTIFICATION-TYPE    

adminTrapsAdminCmd 1.3.6.1.4.1.14125.1.1.2.2.2
This traps is generated when the administrator initiate an command. Trap Severity Level: Informative.
Status: current Access: read-only
NOTIFICATION-TYPE    

userTraps 1.3.6.1.4.1.14125.1.1.2.3
This is the user related trap group.
Status: current Access: read-only
OBJECT-IDENTITY    

userTrapsUserLogin 1.3.6.1.4.1.14125.1.1.2.3.1
This traps is generated when a user login to the network. Trap Severity Level: Informative.
Status: current Access: read-only
NOTIFICATION-TYPE    

userTrapsUserLogout 1.3.6.1.4.1.14125.1.1.2.3.2
This trap is generated when a user logout from the network. Trap Severity Level: Informative.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemTraps 1.3.6.1.4.1.14125.1.1.2.4
This is the system related trap/notification group.
Status: current Access: read-only
OBJECT-IDENTITY    

systemTrapsSystemReboot 1.3.6.1.4.1.14125.1.1.2.4.1
This trap is generated when the system is down to reboot. Trap Severity Level: Major.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemTrapsSystemRestore 1.3.6.1.4.1.14125.1.1.2.4.2
This trap is generated the default configuration of the system is restored. Trap Severity Level: Major.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemTrapsSystemUpgrade 1.3.6.1.4.1.14125.1.1.2.4.3
This trap is generated when the firmware of the system is upgraded. Trap Severity Level: Major.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemTrapsSystemConf 1.3.6.1.4.1.14125.1.1.2.4.4
This trap is generated when the configuration of the system is upgraded. Trap Severity Level: Major.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemTrapsSystemStatus 1.3.6.1.4.1.14125.1.1.2.4.5
This trap is generated when any changes occur to the system, like memory, firmware, etc. Trap Severity Level: Minor.
Status: current Access: read-only
NOTIFICATION-TYPE    

systemName 1.3.6.1.4.1.14125.1.2.1.1
The name of the managed device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemLocation 1.3.6.1.4.1.14125.1.2.1.2
The location name of the managed device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemContactName 1.3.6.1.4.1.14125.1.2.1.3
The name of the contact person who manages the device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemContactMail 1.3.6.1.4.1.14125.1.2.1.4
The Email Address of the contact person who manages the device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemContactPhone 1.3.6.1.4.1.14125.1.2.1.5
The contact number of the contact person who manages the device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemDescription 1.3.6.1.4.1.14125.1.2.1.6
A short description regarding the managed device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemObjectid 1.3.6.1.4.1.14125.1.2.1.7
The object id of the system
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

systemOperatemode 1.3.6.1.4.1.14125.1.2.1.8
Define the mode of the system/device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gateway(1), relay(2), clientrelay(3), layer2gw(4), layer2(5), bridge(6), router(7), dualradiogw(8), dualradiorelay(9), dualradiocrelay(10), mlrd(11), slavebridge(12), masterbridge(13), wdsbridge(14), repeater(15), client(16), clientrouter(17), wdsrouter(18)  

systemUpdateMode 1.3.6.1.4.1.14125.1.2.1.9
SnmpSet to update the system firmware when mode is changed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..13  

ethernetInterfaceTable 1.3.6.1.4.1.14125.1.2.2.1
This table contains the information of the ethernet interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetInterfaceTableEntry

ethernetInterfaceTableEntry 1.3.6.1.4.1.14125.1.2.2.1.1
Represent the entry in the Ethernet Interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EthernetInterfaceTableEntry  

ethInterfaceTableIndex 1.3.6.1.4.1.14125.1.2.2.1.1.1
Specify the index of the Ethernet interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2  

ethInterfaceTableName 1.3.6.1.4.1.14125.1.2.2.1.1.2
The name of the ethernet interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ethInterfaceTableBase 1.3.6.1.4.1.14125.1.2.2.1.1.3
The base name of the ethernet interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ethInterfaceTableMac 1.3.6.1.4.1.14125.1.2.2.1.1.4
The hardware address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ethInterfaceTableBridge 1.3.6.1.4.1.14125.1.2.2.1.1.5
The bridge interface that the current ethernet interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ethInterfaceTableBridgeCost 1.3.6.1.4.1.14125.1.2.2.1.1.6
The cost of the bridge interface that the current ethernet interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

ethInterfaceTableBridgePrio 1.3.6.1.4.1.14125.1.2.2.1.1.7
The priority of the bridge interface that the current ethernet interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

ethInterfaceTableComments 1.3.6.1.4.1.14125.1.2.2.1.1.8
An optional comment associated to entry of the ethernet interface table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ethInterfaceTableActive 1.3.6.1.4.1.14125.1.2.2.1.1.9
The status of the Ethernet interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ethInterfaceTableRowStatus 1.3.6.1.4.1.14125.1.2.2.1.1.10
The row status in the Ethernet interface table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wirelessInterfaceTable 1.3.6.1.4.1.14125.1.2.3.1
This table contains the information of the Wireless interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessInterfaceTableEntry

wirelessInterfaceTableEntry 1.3.6.1.4.1.14125.1.2.3.1.1
Represent the entry in the Wireless interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessInterfaceTableEntry  

wlanInterfaceTableIndex 1.3.6.1.4.1.14125.1.2.3.1.1.1
Specify the index of the Wireless interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..52  

wlanInterfaceTableName 1.3.6.1.4.1.14125.1.2.3.1.1.2
The name of the Wireless interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

wlanInterfaceTableBase 1.3.6.1.4.1.14125.1.2.3.1.1.3
The base name of the Wireless interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

wlanInterfaceTableBridge 1.3.6.1.4.1.14125.1.2.3.1.1.4
The bridge interface that the current wireless interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

wlanInterfaceTableBridgeCost 1.3.6.1.4.1.14125.1.2.3.1.1.5
The cost of the bridge interface that the current wireless interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

wlanInterfaceTableBridgePrio 1.3.6.1.4.1.14125.1.2.3.1.1.6
The priority of the bridge interface that the current wireless interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

wlanInterfaceTableMode 1.3.6.1.4.1.14125.1.2.3.1.1.7
The operating mode of the wireless interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ap(1), sta(2), adhoc(3), wds(4)  

wlanInterfaceTableBand 1.3.6.1.4.1.14125.1.2.3.1.1.8
The Operating band of the wireless interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dot11a(1), dot11b(2), dot11g(3)  

wlanInterfaceTableEssid 1.3.6.1.4.1.14125.1.2.3.1.1.9
The Essid of the wireless interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

wlanInterfaceTableFreq 1.3.6.1.4.1.14125.1.2.3.1.1.10
The operating frequency of the wireless interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

wlanInterfaceTableMac 1.3.6.1.4.1.14125.1.2.3.1.1.11
The hardware address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

wlanInterfaceTableSecurity 1.3.6.1.4.1.14125.1.2.3.1.1.12
The security mode of the wireless interface entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER open(1), wep(2), wpa1(3), aes(4), wpa2(5), wpa1n2(6)  

wlanInterfaceTableWpaType 1.3.6.1.4.1.14125.1.2.3.1.1.13
The WPA Type of the wireless interface using.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tkip(1), aes(2)  

wlanInterfaceTableDot1x 1.3.6.1.4.1.14125.1.2.3.1.1.14
Enable the radius server as authenticator for the current wireless interface entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wlanInterfaceTableEncryptionKey 1.3.6.1.4.1.14125.1.2.3.1.1.15
The key used with WEP encryption.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

wlanInterfaceTableBroadcastSsid 1.3.6.1.4.1.14125.1.2.3.1.1.16
Enable or disable broadcast ESSID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlanInterfaceTableBeaconInt 1.3.6.1.4.1.14125.1.2.3.1.1.17
The beacon interval in mili seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 20..1000  

wlanInterfaceTableRtsThreshold 1.3.6.1.4.1.14125.1.2.3.1.1.18
The RTS Threshold.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 256..2346  

wlanInterfaceTableFragThreshold 1.3.6.1.4.1.14125.1.2.3.1.1.19
The Fragment Threshold (Even Number only).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1500..2346  

wlanInterfaceTableDtimInterval 1.3.6.1.4.1.14125.1.2.3.1.1.20
The DTIM interval.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..256  

wlanInterfaceTableDatarate 1.3.6.1.4.1.14125.1.2.3.1.1.21
The Data rate, available choice are auto(0), 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48 and 54.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..54  

wlanInterfaceTableDiversity 1.3.6.1.4.1.14125.1.2.3.1.1.22
Select to enable or disable the diversity of the antenna.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2), carddefault(3)  

wlanInterfaceTableTxAntenna 1.3.6.1.4.1.14125.1.2.3.1.1.23
Select the type of the transmission antenna.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER diversity(0), port1(1), port2(2), carddefault(3)  

wlanInterfaceTableRxAntenna 1.3.6.1.4.1.14125.1.2.3.1.1.24
Select the type of the receiving antenna.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER diversity(0), port1(1), port2(2), carddefault(3)  

wlanInterfaceTableCrntTxPower 1.3.6.1.4.1.14125.1.2.3.1.1.25
The current Transmit Power level in dBm of the device wireless card.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..9999  

wlanInterfaceTableTxPower 1.3.6.1.4.1.14125.1.2.3.1.1.26
The Transmit Power level in dBm (0-27) of the wireless card, where 9999 indicates MAX value of the card.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..9999  

wlanInterfaceTableSeperation 1.3.6.1.4.1.14125.1.2.3.1.1.27
Enable or disable wireless seperation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlanInterfaceTableComments 1.3.6.1.4.1.14125.1.2.3.1.1.28
An optional comment associated to entry of the wireless interface table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

wlanInterfaceTableActive 1.3.6.1.4.1.14125.1.2.3.1.1.29
The status of the Wireless interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wlanInterfaceTableRowStatus 1.3.6.1.4.1.14125.1.2.3.1.1.30
The row status in the Wireless interface table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wirelessFrequencyMeshTable 1.3.6.1.4.1.14125.1.2.3.2
This table display the available frequency channel of the Wireless Mesh interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessFrequencyMeshTableEntry

wirelessFrequencyMeshTableEntry 1.3.6.1.4.1.14125.1.2.3.2.1
Represent the entry in the Wireless Mesh frequency table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessFrequencyMeshTableEntry  

wlanFrequencyMeshTableIndex 1.3.6.1.4.1.14125.1.2.3.2.1.1
Specify the index of the Wireless Mesh interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..100  

wlanFrequencyMeshTableChannel 1.3.6.1.4.1.14125.1.2.3.2.1.2
The channel number of the frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wlanFrequencyMeshTableFrequency 1.3.6.1.4.1.14125.1.2.3.2.1.3
The frequency level in Giga Hertz.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wlanFrequencyMeshTableRowStatus 1.3.6.1.4.1.14125.1.2.3.2.1.4
The row status in the Wireless Mesh frequency table entry
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

wirelessFrequencyAp0Table 1.3.6.1.4.1.14125.1.2.3.3
This table display the available frequency channel of the wireless access point radio 1 card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessFrequencyAp0TableEntry

wirelessFrequencyAp0TableEntry 1.3.6.1.4.1.14125.1.2.3.3.1
Represent the entry in the Wireless radio 1 frequency table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessFrequencyAp0TableEntry  

wlanFrequencyAp0TableIndex 1.3.6.1.4.1.14125.1.2.3.3.1.1
Specify the index of the Wireless radio 1 interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..100  

wlanFrequencyAp0TableChannel 1.3.6.1.4.1.14125.1.2.3.3.1.2
The channel number of the frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wlanFrequencyAp0TableFrequency 1.3.6.1.4.1.14125.1.2.3.3.1.3
The frequency level in Giga Hertz.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wlanFrequencyAp0TableRowStatus 1.3.6.1.4.1.14125.1.2.3.3.1.4
The row status in the Wireless radio 1 frequency table entry
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

wirelessFrequencyAp1Table 1.3.6.1.4.1.14125.1.2.3.4
This table display the available frequency channel of the wireless access point radio 2 (if exist).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessFrequencyAp1TableEntry

wirelessFrequencyAp1TableEntry 1.3.6.1.4.1.14125.1.2.3.4.1
Represent the entry in the Wireless radio 2 frequency table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessFrequencyAp1TableEntry  

wlanFrequencyAp1TableIndex 1.3.6.1.4.1.14125.1.2.3.4.1.1
Specify the index of the Wireless radio 2 interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..100  

wlanFrequencyAp1TableChannel 1.3.6.1.4.1.14125.1.2.3.4.1.2
The channel number of the frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wlanFrequencyAp1TableFrequency 1.3.6.1.4.1.14125.1.2.3.4.1.3
The frequency level in Giga Hertz.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wlanFrequencyAp1TableRowStatus 1.3.6.1.4.1.14125.1.2.3.4.1.4
The row status in the Wireless radio 2 frequency table entry
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

vlanInterfaceTable 1.3.6.1.4.1.14125.1.2.4.1
This table contains the information of the VLAN interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanInterfaceTableEntry

vlanInterfaceTableEntry 1.3.6.1.4.1.14125.1.2.4.1.1
Represent the entry in the VLAN interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanInterfaceTableEntry  

vlanInterfaceTableIndex 1.3.6.1.4.1.14125.1.2.4.1.1.1
Specify the index of the VLAN interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..32  

vlanInterfaceTableName 1.3.6.1.4.1.14125.1.2.4.1.1.2
The name of the VLAN interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vlanInterfaceTableBase 1.3.6.1.4.1.14125.1.2.4.1.1.3
The base name of the VLAN interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vlanInterfaceTableMac 1.3.6.1.4.1.14125.1.2.4.1.1.4
The hardware address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

vlanInterfaceTableId 1.3.6.1.4.1.14125.1.2.4.1.1.5
The VLAN ID for the table entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanInterfaceTableBridge 1.3.6.1.4.1.14125.1.2.4.1.1.6
The bridge interface that the current VLAN interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

vlanInterfaceTableBridgeCost 1.3.6.1.4.1.14125.1.2.4.1.1.7
The cost of the bridge interface that the current VLAN interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

vlanInterfaceTableBridgePrio 1.3.6.1.4.1.14125.1.2.4.1.1.8
The priority of the bridge interface that the current VLAN interface is attached to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

vlanInterfaceTableComments 1.3.6.1.4.1.14125.1.2.4.1.1.9
An optional comment associated to entry of the VLAN interface table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanInterfaceTableActive 1.3.6.1.4.1.14125.1.2.4.1.1.10
The status of the VLAN interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vlanInterfaceTableRowStatus 1.3.6.1.4.1.14125.1.2.4.1.1.11
The row status in the VLAN interface table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

bridgeInterfaceTable 1.3.6.1.4.1.14125.1.2.5.1
This table contains the information of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BridgeInterfaceTableEntry

bridgeInterfaceTableEntry 1.3.6.1.4.1.14125.1.2.5.1.1
Represent the entry in the Bridge Interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  BridgeInterfaceTableEntry  

bridgeInterfaceTableIndex 1.3.6.1.4.1.14125.1.2.5.1.1.1
Specify the index of the Bridge interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

bridgeInterfaceTableName 1.3.6.1.4.1.14125.1.2.5.1.1.2
The name of the Bridge interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

bridgeInterfaceTableMac 1.3.6.1.4.1.14125.1.2.5.1.1.3
The hardware address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

bridgeInterfaceTableAge 1.3.6.1.4.1.14125.1.2.5.1.1.4
The bridge ageing time.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

bridgeInterfaceTablePrio 1.3.6.1.4.1.14125.1.2.5.1.1.5
The priority of the bridge interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

bridgeInterfaceTableFwdDelay 1.3.6.1.4.1.14125.1.2.5.1.1.6
The bridge forwarding delay.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

bridgeInterfaceTableHelloInt 1.3.6.1.4.1.14125.1.2.5.1.1.7
The Hello Interval of the bridge interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

bridgeInterfaceTableMaxAge 1.3.6.1.4.1.14125.1.2.5.1.1.8
The bridge maximum message age.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

bridgeInterfaceTableStp 1.3.6.1.4.1.14125.1.2.5.1.1.9
Turn on or off the Spanning Tree Protocol.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER on(1), off(2)  

bridgeInterfaceTableComments 1.3.6.1.4.1.14125.1.2.5.1.1.10
An optional comment associated to entry of the bridge interface table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

bridgeInterfaceTableActive 1.3.6.1.4.1.14125.1.2.5.1.1.11
The status of the bridge interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

bridgeInterfaceTableRowStatus 1.3.6.1.4.1.14125.1.2.5.1.1.12
The row status in the Bridge interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipAddressesTable 1.3.6.1.4.1.14125.1.2.6.1
This table contains the information of the IP Addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAddressesTableEntry

ipAddressesTableEntry 1.3.6.1.4.1.14125.1.2.6.1.1
Represent the entry in the IP Address Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddressesTableEntry  

ipAddressesTableIndex 1.3.6.1.4.1.14125.1.2.6.1.1.1
Specify the index of the IP Address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..64  

ipAddressesTableIface 1.3.6.1.4.1.14125.1.2.6.1.1.2
The name of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ipAddressesTableType 1.3.6.1.4.1.14125.1.2.6.1.1.3
The type of IP Address: Static or DHCP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER static(1), dhcp(2), pppoe(3), ipalias(4)  

ipAddressesTableIp 1.3.6.1.4.1.14125.1.2.6.1.1.4
The IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressesTableNetmask 1.3.6.1.4.1.14125.1.2.6.1.1.5
The Netmask for IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressesTableBroadcast 1.3.6.1.4.1.14125.1.2.6.1.1.6
The Broadcast IP for the IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressesTableGateway 1.3.6.1.4.1.14125.1.2.6.1.1.7
The Gateway IP for the IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAddressesTableRouted 1.3.6.1.4.1.14125.1.2.6.1.1.8
The type of the IP Address table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER routable(1), nat(2)  

ipAddressesTableComments 1.3.6.1.4.1.14125.1.2.6.1.1.9
An optional comment associated to entry of the IP Address table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipAddressesTableActive 1.3.6.1.4.1.14125.1.2.6.1.1.10
The status of the IP Address table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipAddressesTableRowStatus 1.3.6.1.4.1.14125.1.2.6.1.1.11
The row status in the IP Address table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

networkPrimaryDns 1.3.6.1.4.1.14125.1.2.7.1
The primary DNS Server IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

networkSecondaryDns 1.3.6.1.4.1.14125.1.2.7.2
The secondary DNS Server IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

networkDomain 1.3.6.1.4.1.14125.1.2.7.3
The DNS Server Domain name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

syslogActive 1.3.6.1.4.1.14125.1.2.8.1
Enable/Disable the syslog service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

syslogKlog 1.3.6.1.4.1.14125.1.2.8.2
Enable/Disable the Klog service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

syslogLevel 1.3.6.1.4.1.14125.1.2.8.3
Define the level of the syslog service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

syslogRemoteActive 1.3.6.1.4.1.14125.1.2.8.4
Enable/Disable the remote syslog server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

syslogRemoteAddress 1.3.6.1.4.1.14125.1.2.8.5
The remote syslog server name/address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

olsrActive 1.3.6.1.4.1.14125.1.2.9.1
Enable/Disable the OLSR service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

olsrTosValue 1.3.6.1.4.1.14125.1.2.9.2
Display the value for the IP header of control traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16  

olsrWillingnessActive 1.3.6.1.4.1.14125.1.2.9.3
Display the option of automatic willingness calculation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

olsrWillingness 1.3.6.1.4.1.14125.1.2.9.4
Display the willingness value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

olsrHysteresisActive 1.3.6.1.4.1.14125.1.2.9.5
Display the option of hysteresis.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

olsrHysteresisScaling 1.3.6.1.4.1.14125.1.2.9.6
Display the scale of hysteresis parameter (range: 0 to 1).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrHysteresisThrHigh 1.3.6.1.4.1.14125.1.2.9.7
Display the value of high threshold (range: 0 to 1).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrHysteresisThrLow 1.3.6.1.4.1.14125.1.2.9.8
Display the value of low threshold (range: 0 to 1).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrLinkQualityType 1.3.6.1.4.1.14125.1.2.9.9
Display the option of link quality type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), useformpr(1), useformprandrouting(2)  

olsrLinkQualitySize 1.3.6.1.4.1.14125.1.2.9.10
Display the link quality window size.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..128  

olsrPollRate 1.3.6.1.4.1.14125.1.2.9.11
Display the polling rate in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrTcType 1.3.6.1.4.1.14125.1.2.9.12
Display the option of TC type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sendonlymprselectors(0), sendonlymprselectorsandmprs(1), sendallneighbors(2)  

olsrMpr 1.3.6.1.4.1.14125.1.2.9.13
Display the value of how many MPRs a node should try to select to reach every 2 hop neighbour.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

olsrSharedKey 1.3.6.1.4.1.14125.1.2.9.14
The shared key for OLSR
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

olsrInterfaceTable 1.3.6.1.4.1.14125.1.2.9.15
This table contains the information of the OLSR interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OlsrInterfaceTableEntry

olsrInterfaceTableEntry 1.3.6.1.4.1.14125.1.2.9.15.1
Represent the entry in the OLSR Interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OlsrInterfaceTableEntry  

olsrInterfaceTableIndex 1.3.6.1.4.1.14125.1.2.9.15.1.1
Specify the index of the OLSR interface table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..10  

olsrInterfaceTableIface 1.3.6.1.4.1.14125.1.2.9.15.1.2
The name of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableHelloInterval 1.3.6.1.4.1.14125.1.2.9.15.1.3
The hello interval of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableHelloValidity 1.3.6.1.4.1.14125.1.2.9.15.1.4
The hello validity of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableTcInterval 1.3.6.1.4.1.14125.1.2.9.15.1.5
The TC interval of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableTcValidity 1.3.6.1.4.1.14125.1.2.9.15.1.6
The TC validity of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableMidInterval 1.3.6.1.4.1.14125.1.2.9.15.1.7
The MID interval of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableMidValidity 1.3.6.1.4.1.14125.1.2.9.15.1.8
The MID validity of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableHnaInterval 1.3.6.1.4.1.14125.1.2.9.15.1.9
The HNA interval of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableHnaValidity 1.3.6.1.4.1.14125.1.2.9.15.1.10
The HNA validity of the OLSR interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

olsrInterfaceTableComments 1.3.6.1.4.1.14125.1.2.9.15.1.11
An optional description regarding the entry of the Olsr Interface table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

olsrInterfaceTableActive 1.3.6.1.4.1.14125.1.2.9.15.1.12
The status of the OLSR Interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

olsrInterfaceTableRowStatus 1.3.6.1.4.1.14125.1.2.9.15.1.13
The row status in the OLSR Interface table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

olsrGatewayTable 1.3.6.1.4.1.14125.1.2.18.1
This table contains the OLSR local network gateway.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OlsrGatewayTableEntry

olsrGatewayTableEntry 1.3.6.1.4.1.14125.1.2.18.1.1
Represent the entry in the OLSR Gateway table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OlsrGatewayTableEntry  

olsrGatewayTableIndex 1.3.6.1.4.1.14125.1.2.18.1.1.1
Specify the index of the OLSR gateway table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..10  

olsrGatewayTableSubnet 1.3.6.1.4.1.14125.1.2.18.1.1.2
The Subnet Address of the OLSR gateway entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

olsrGatewayTableNetmask 1.3.6.1.4.1.14125.1.2.18.1.1.3
The netmask for the subnet above.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

olsrGatewayTableComments 1.3.6.1.4.1.14125.1.2.18.1.1.4
An optional description regarding the entry of the Olsr Gateway table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

olsrGatewayTableActive 1.3.6.1.4.1.14125.1.2.18.1.1.5
The status of the OLSR Gateway table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

olsrGatewayTableRowStatus 1.3.6.1.4.1.14125.1.2.18.1.1.6
The row status in the OLSR Gateway table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

routeTable 1.3.6.1.4.1.14125.1.2.10.1
This table contains the information of the Route settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouteTableEntry

routeTableEntry 1.3.6.1.4.1.14125.1.2.10.1.1
Represent the entry in the Route table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RouteTableEntry  

routeTableIndex 1.3.6.1.4.1.14125.1.2.10.1.1.1
Specify the index of the routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

routeTableSubnet 1.3.6.1.4.1.14125.1.2.10.1.1.2
The destination Subnet of the routing rule.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

routeTableNetmask 1.3.6.1.4.1.14125.1.2.10.1.1.3
The Netmask for the destination subnet of the routing rule.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

routeTableGateway 1.3.6.1.4.1.14125.1.2.10.1.1.4
The next hop gateway IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

routeTableDevice 1.3.6.1.4.1.14125.1.2.10.1.1.5
The Device Interface Name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

routeTableDirect 1.3.6.1.4.1.14125.1.2.10.1.1.6
The type of routing: direct or indirect.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER direct(1), indirect(2)  

routeTableComments 1.3.6.1.4.1.14125.1.2.10.1.1.7
An optional description regarding the entry of the Routing table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

routeTableActive 1.3.6.1.4.1.14125.1.2.10.1.1.8
The status of the Routing table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

routeTableRowStatus 1.3.6.1.4.1.14125.1.2.10.1.1.9
The row status in the Routing table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ntpActive 1.3.6.1.4.1.14125.1.2.11.1
Enable/Disable the NTP service of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ntpTimezone 1.3.6.1.4.1.14125.1.2.11.2
NTP Timezone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ntpTable 1.3.6.1.4.1.14125.1.2.11.3
This is the Network Time Protocol servers table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtpTableEntry

ntpTableEntry 1.3.6.1.4.1.14125.1.2.11.3.1
Represent the entry in the NTP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtpTableEntry  

ntpTableIndex 1.3.6.1.4.1.14125.1.2.11.3.1.1
Specify the index of the NTP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..8  

ntpTableServer 1.3.6.1.4.1.14125.1.2.11.3.1.2
The name of the NTP Server.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ntpTableMinPoll 1.3.6.1.4.1.14125.1.2.11.3.1.3
The minimum poll time in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..10  

ntpTableMaxPoll 1.3.6.1.4.1.14125.1.2.11.3.1.4
The maximum poll time in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

ntpTableComments 1.3.6.1.4.1.14125.1.2.11.3.1.5
An optional description regarding the entry of the NTP table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

ntpTableActive 1.3.6.1.4.1.14125.1.2.11.3.1.6
The status of the NTP table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ntpTableRowStatus 1.3.6.1.4.1.14125.1.2.11.3.1.7
The row status in the NTP table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dhcpdTable 1.3.6.1.4.1.14125.1.2.12.1
This is the DHCP server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpdTableEntry

dhcpdTableEntry 1.3.6.1.4.1.14125.1.2.12.1.1
Represent the entry in the DHCP server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpdTableEntry  

dhcpdTableIndex 1.3.6.1.4.1.14125.1.2.12.1.1.1
Specify the index of the DHCP server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

dhcpdTableIface 1.3.6.1.4.1.14125.1.2.12.1.1.2
Specify the interface name of the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dhcpdTableSubnet 1.3.6.1.4.1.14125.1.2.12.1.1.3
Specify the Subnet Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableNetstart 1.3.6.1.4.1.14125.1.2.12.1.1.4
Specify the Starting IP Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableNetend 1.3.6.1.4.1.14125.1.2.12.1.1.5
Specify the Ending IP Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableNetmask 1.3.6.1.4.1.14125.1.2.12.1.1.6
Specify the Netmask for the subnet Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableMaxLease 1.3.6.1.4.1.14125.1.2.12.1.1.7
Specify the maximum lease time for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 600..864000  

dhcpdTableLease 1.3.6.1.4.1.14125.1.2.12.1.1.8
Specify the default lease time for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 600..864000  

dhcpdTableDomain 1.3.6.1.4.1.14125.1.2.12.1.1.9
The domain name of the DHCP server table's entry.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dhcpdTableDns 1.3.6.1.4.1.14125.1.2.12.1.1.10
Specify the DNS IP Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableRouter 1.3.6.1.4.1.14125.1.2.12.1.1.11
Specify the Router IP Address for the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dhcpdTableComments 1.3.6.1.4.1.14125.1.2.12.1.1.12
An optional description regarding the entry of the DHCP server table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

dhcpdTableActive 1.3.6.1.4.1.14125.1.2.12.1.1.13
The status of the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpdTableRowStatus 1.3.6.1.4.1.14125.1.2.12.1.1.14
The row status in the DHCP server table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dhcpdActive 1.3.6.1.4.1.14125.1.2.12.2
Enable/Disable the DHCPD Service of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpClientExecute 1.3.6.1.4.1.14125.1.2.12.3
A command to execute the DHCP Client list
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

dhcpClientTable 1.3.6.1.4.1.14125.1.2.12.4
This is the read-only DHCP client table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpClientTableEntry

dhcpClientTableEntry 1.3.6.1.4.1.14125.1.2.12.4.1
Represent the entry in the DHCP client table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpClientTableEntry  

dhcpClientTableIndex 1.3.6.1.4.1.14125.1.2.12.4.1.1
Specify the index of the DHCP client table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..254  

dhcpClientTableIp 1.3.6.1.4.1.14125.1.2.12.4.1.2
Specify the IP address of the client in the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpClientTableMac 1.3.6.1.4.1.14125.1.2.12.4.1.3
Specify the MAC address of the client in the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dhcpClientTableHostname 1.3.6.1.4.1.14125.1.2.12.4.1.4
Specify the Host name of the client in the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dnsActive 1.3.6.1.4.1.14125.1.2.13.1
Enable/Disable the DNS Service of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsDomainNeeded 1.3.6.1.4.1.14125.1.2.13.2
Enable/Disable the strict domain checking of the DNS Service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsBogusPriv 1.3.6.1.4.1.14125.1.2.13.3
Enable/Disable the feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsFilterWin2k 1.3.6.1.4.1.14125.1.2.13.4
Enable/Disable the filter for Windows 2k.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsStrictOrder 1.3.6.1.4.1.14125.1.2.13.5
Enable/Disable the strict DNS lookup order feature .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsTable 1.3.6.1.4.1.14125.1.2.13.6
This table contains the information of the DNS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsTableEntry

dnsTableEntry 1.3.6.1.4.1.14125.1.2.13.6.1
Represent the entry in the DNS table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DnsTableEntry  

dnsTableIndex 1.3.6.1.4.1.14125.1.2.13.6.1.1
Specify the index of the DNS service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

dnsTableDns 1.3.6.1.4.1.14125.1.2.13.6.1.2
Specify the Hostname/Domain name of the DNS Service table entry.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dnsTableIpaddress 1.3.6.1.4.1.14125.1.2.13.6.1.3
Specify the reply IP Address of the table entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

dnsTableComments 1.3.6.1.4.1.14125.1.2.13.6.1.4
An optional comment associated to entry of the DNS service table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

dnsTableActive 1.3.6.1.4.1.14125.1.2.13.6.1.5
The status of the DNS table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsTableRowStatus 1.3.6.1.4.1.14125.1.2.13.6.1.6
The row status in the DNS table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

topologyTable 1.3.6.1.4.1.14125.1.2.14.1
This table contains the list of topology of the node, displaying the relationship between this node and other.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TopologyTableEntry

topologyTableEntry 1.3.6.1.4.1.14125.1.2.14.1.1
Represent the entry in the Topology table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TopologyTableEntry  

topologyTableIndex 1.3.6.1.4.1.14125.1.2.14.1.1.1
Specify the index of the node Topology table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4096  

topologyTableSource 1.3.6.1.4.1.14125.1.2.14.1.1.2
The source node's IP Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(7..17)  

topologyTableDestination 1.3.6.1.4.1.14125.1.2.14.1.1.3
The destination node's IP Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(7..17)  

topologyTableLabel 1.3.6.1.4.1.14125.1.2.14.1.1.4
The label of the link between the source node and destination node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

topologyTableStyle 1.3.6.1.4.1.14125.1.2.14.1.1.5
The style of the link between the source node and destination node.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

firewallActive 1.3.6.1.4.1.14125.1.2.15.1
Enable/Disable the Firewall feature of the node.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

firewallTable 1.3.6.1.4.1.14125.1.2.15.2
This table contains rules of the firewall of the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FirewallTableEntry

firewallTableEntry 1.3.6.1.4.1.14125.1.2.15.2.1
Represent the entry in the Firewall table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FirewallTableEntry  

firewallTableIndex 1.3.6.1.4.1.14125.1.2.15.2.1.1
Specify the index of the firewall table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1024  

firewallTableTarget 1.3.6.1.4.1.14125.1.2.15.2.1.2
Allow or deny the Target.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

firewallTableSrcIface 1.3.6.1.4.1.14125.1.2.15.2.1.3
The source interface name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

firewallTableDstIface 1.3.6.1.4.1.14125.1.2.15.2.1.4
The destination interface name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

firewallTableSrcIp 1.3.6.1.4.1.14125.1.2.15.2.1.5
The source IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

firewallTableSrcMask 1.3.6.1.4.1.14125.1.2.15.2.1.6
The net mask for the source IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

firewallTableDstIp 1.3.6.1.4.1.14125.1.2.15.2.1.7
The destination IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

firewallTableDstMask 1.3.6.1.4.1.14125.1.2.15.2.1.8
The net mask for the destination IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

firewallTableProtocol 1.3.6.1.4.1.14125.1.2.15.2.1.9
The protocol in number
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

firewallTableStartPort 1.3.6.1.4.1.14125.1.2.15.2.1.10
The start port number
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65535  

firewallTableEndPort 1.3.6.1.4.1.14125.1.2.15.2.1.11
The end port number
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65535  

firewallTableUserGroup 1.3.6.1.4.1.14125.1.2.15.2.1.12
User group associated with this rule
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..999999  

firewallTableComment 1.3.6.1.4.1.14125.1.2.15.2.1.13
The name for the specified rules
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

firewallTableActive 1.3.6.1.4.1.14125.1.2.15.2.1.14
The status of the firewall table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

firewallTableRowStatus 1.3.6.1.4.1.14125.1.2.15.2.1.15
The row status in the firewall table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

macaccessActive 1.3.6.1.4.1.14125.1.2.16.1
Enable/Disable the MAC ACCESS feature of the node.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

macaccessType 1.3.6.1.4.1.14125.1.2.16.2
Choose the default type of the access, either Allow or Deny.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

macaccessTable 1.3.6.1.4.1.14125.1.2.16.4
This table display the Mac Access Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacaccessTableEntry

macaccessTableEntry 1.3.6.1.4.1.14125.1.2.16.4.1
Represent the entry in the Mac Access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacaccessTableEntry  

macaccessTableIndex 1.3.6.1.4.1.14125.1.2.16.4.1.1
Specify the index of the MAC Access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1024  

macaccessTableMac 1.3.6.1.4.1.14125.1.2.16.4.1.2
The MAC address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

macaccessTableType 1.3.6.1.4.1.14125.1.2.16.4.1.3
The type of the access for the MAC access table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

macaccessTableComment 1.3.6.1.4.1.14125.1.2.16.4.1.4
An optional comment associated to entry of the MAC Access table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

macaccessTableActive 1.3.6.1.4.1.14125.1.2.16.4.1.5
The status of the MAC access table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

macaccessTableRowStatus 1.3.6.1.4.1.14125.1.2.16.4.1.6
The row status in the MAC Access table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

macActiveListExecute 1.3.6.1.4.1.14125.1.2.16.3
A command to execute the Active MAC list
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

macActiveTable 1.3.6.1.4.1.14125.1.2.16.5
This is the read-only Active MAC table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacActiveTableEntry

macActiveTableEntry 1.3.6.1.4.1.14125.1.2.16.5.1
Represent the entry in the Active MAC table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacActiveTableEntry  

macActiveTableIndex 1.3.6.1.4.1.14125.1.2.16.5.1.1
Specify the index of the Active MAC table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1024  

macActiveTableMac 1.3.6.1.4.1.14125.1.2.16.5.1.2
Specify the MAC address of the active user Active MAC table.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

macActiveTableIp 1.3.6.1.4.1.14125.1.2.16.5.1.3
Specify the MAC address of the active user Active MAC table.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

natActive 1.3.6.1.4.1.14125.1.2.17.1
Enable/Disable the NAT Table of the node.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

natTable 1.3.6.1.4.1.14125.1.2.17.2
This table display the NAT Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NatTableEntry

natTableEntry 1.3.6.1.4.1.14125.1.2.17.2.1
Represent the entry in the NAT table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NatTableEntry  

natTableIndex 1.3.6.1.4.1.14125.1.2.17.2.1.1
Specify the index of the NAT table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..256  

natTableProtocol 1.3.6.1.4.1.14125.1.2.17.2.1.2
Define the type of protocol of the NAT Table entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), both(3)  

natTablePort 1.3.6.1.4.1.14125.1.2.17.2.1.3
Define the port number of the NAT Table entry
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

natTableIp 1.3.6.1.4.1.14125.1.2.17.2.1.4
Define the IP Address of the NAT Table entry
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

natTableComment 1.3.6.1.4.1.14125.1.2.17.2.1.5
An optional comment associated to entry of the NAT table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

natTableActive 1.3.6.1.4.1.14125.1.2.17.2.1.6
The status of the NAT table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

natTableRowStatus 1.3.6.1.4.1.14125.1.2.17.2.1.7
The row status in the NAT table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

shapingActive 1.3.6.1.4.1.14125.1.2.19.1
Enable/disable the traffic shaping service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

shapingWanRateup 1.3.6.1.4.1.14125.1.2.19.2
WAN port uplink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..100  

shapingWanRatedown 1.3.6.1.4.1.14125.1.2.19.3
WAN port downlink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..100  

shapingMeshRateup 1.3.6.1.4.1.14125.1.2.19.4
Mesh port uplink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

shapingMeshRatedown 1.3.6.1.4.1.14125.1.2.19.5
Mesh port downlink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

shapingVlanRateup 1.3.6.1.4.1.14125.1.2.19.6
VLAN port uplink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

shapingVlanRatedown 1.3.6.1.4.1.14125.1.2.19.7
VLAN port downlink speed in Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

shapingDefaultup 1.3.6.1.4.1.14125.1.2.19.8
User default uplink speed in kbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 32..65535  

shapingDefaultdown 1.3.6.1.4.1.14125.1.2.19.9
User default downlink speed in kbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 32..65535  

shapingTable 1.3.6.1.4.1.14125.1.2.19.10
This table display the traffic shaping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ShapingTableEntry

shapingTableEntry 1.3.6.1.4.1.14125.1.2.19.10.1
Represent the entry in the traffic shaping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ShapingTableEntry  

shapingTableIndex 1.3.6.1.4.1.14125.1.2.19.10.1.1
Specify the index of the traffic shaping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1024  

shapingTableProtocol 1.3.6.1.4.1.14125.1.2.19.10.1.2
Define the type of protocol of the traffic shaping Table entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), both(3)  

shapingTablePort 1.3.6.1.4.1.14125.1.2.19.10.1.3
Define the port number of the traffic shaping Table entry
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

shapingTableMinsize 1.3.6.1.4.1.14125.1.2.19.10.1.4
Define the minimum packet size of the traffic shaping Table entry
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

shapingTableMaxsize 1.3.6.1.4.1.14125.1.2.19.10.1.5
Define the maximum packet size of the traffic shaping Table entry
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

shapingTablePriority 1.3.6.1.4.1.14125.1.2.19.10.1.6
Define the type of priority of the traffic shaping Table entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER background(1), video(2), voice(3), besteffort(4)  

shapingTableComment 1.3.6.1.4.1.14125.1.2.19.10.1.7
An optional comment associated to entry of the traffiic shaping table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

shapingTableActive 1.3.6.1.4.1.14125.1.2.19.10.1.8
The status of the traffic shaping table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

shapingTableRowStatus 1.3.6.1.4.1.14125.1.2.19.10.1.9
The row status in the traffic shaping table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppoeActive 1.3.6.1.4.1.14125.1.2.20.1
Enable/disable the PPPoE service of the system
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppoeUsername 1.3.6.1.4.1.14125.1.2.20.2
The username of the PPPoE service
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

pppoePassword 1.3.6.1.4.1.14125.1.2.20.3
The password correspond to the username of the PPPoE service
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

pppoeAuthType 1.3.6.1.4.1.14125.1.2.20.4
The type of authentication
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pap(1), chap(2)  

pppoeUseChap 1.3.6.1.4.1.14125.1.2.20.5
Enable/disable server side authentication
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppoeChapUsername 1.3.6.1.4.1.14125.1.2.20.6
The username at the server side
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

pppoeChapPassword 1.3.6.1.4.1.14125.1.2.20.7
The password correspond to the username at the server side
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

pptpActive 1.3.6.1.4.1.14125.1.2.21.1
Enable/disable the PPTP server service of the system
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pptpTable 1.3.6.1.4.1.14125.1.2.21.2
This table display the PPTP server Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PptpTableEntry

pptpTableEntry 1.3.6.1.4.1.14125.1.2.21.2.1
Represent the entry in the PPTP server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PptpTableEntry  

pptpTableIndex 1.3.6.1.4.1.14125.1.2.21.2.1.1
Specify the index of the PPTP server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..10  

pptpTableUsername 1.3.6.1.4.1.14125.1.2.21.2.1.2
The username of the PPTP server user.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

pptpTablePassword 1.3.6.1.4.1.14125.1.2.21.2.1.3
The password for the username of the PPTP server user.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

pptpTableIp 1.3.6.1.4.1.14125.1.2.21.2.1.4
Define the IP Address of the PPTP server Table entry
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

pptpTableComment 1.3.6.1.4.1.14125.1.2.21.2.1.5
An optional comment associated to entry of the PPTP Server users table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

pptpTableActive 1.3.6.1.4.1.14125.1.2.21.2.1.6
The status of the PPTP Server users table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pptpTableRowStatus 1.3.6.1.4.1.14125.1.2.21.2.1.7
The row status in the PPTP Server users table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pptpServerip 1.3.6.1.4.1.14125.1.2.21.3
Define the PPTP Server IP Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pptpStartip 1.3.6.1.4.1.14125.1.2.21.4
Define the PPTP Client Start Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pptpEndip 1.3.6.1.4.1.14125.1.2.21.5
Define the PPTP Client End Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tmipdActive 1.3.6.1.4.1.14125.1.2.22.1
Enable/disable the transparent mobile IP Agent service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tmipdNetname 1.3.6.1.4.1.14125.1.2.22.2
The Mobile IP network name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

tmipdMlrdip 1.3.6.1.4.1.14125.1.2.22.3
The IP Address of the Mobile Location Register server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tmipdVlan 1.3.6.1.4.1.14125.1.2.22.4
The Mobile IP network name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

captiveActive 1.3.6.1.4.1.14125.1.2.23.1
Enable/disable the webbased authentication
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveRedirect 1.3.6.1.4.1.14125.1.2.23.2
Redirect users to this URL on success authentication
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..512)  

captivePop3push 1.3.6.1.4.1.14125.1.2.23.3
Push email to not authenticated users
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveExternalActive 1.3.6.1.4.1.14125.1.2.23.4
Enable/disable external login server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveExternalServer 1.3.6.1.4.1.14125.1.2.23.5
External login server URL
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..512)  

captiveDefaultIdleTimeout 1.3.6.1.4.1.14125.1.2.23.6
Default Idle Timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

captiveDefaultSessionTimeout 1.3.6.1.4.1.14125.1.2.23.7
Default Session Timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

captiveHttpActive 1.3.6.1.4.1.14125.1.2.23.8
Enable/disable login with HTTP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveHttpPort 1.3.6.1.4.1.14125.1.2.23.9
Port used in captive login.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1000..65535  

captiveHttpsActive 1.3.6.1.4.1.14125.1.2.23.10
Enable/disable login with HTTPS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveHttpsPort 1.3.6.1.4.1.14125.1.2.23.11
Port used in captive login.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1000..65535  

captiveWebspaceActive 1.3.6.1.4.1.14125.1.2.23.12
Enable/disable login with HTTPS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captiveWebspacePort 1.3.6.1.4.1.14125.1.2.23.13
Port used in captive login.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1000..65535  

captiveDefaultLanguage 1.3.6.1.4.1.14125.1.2.23.14
The name of the managed device
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

captiveMultipleUsername 1.3.6.1.4.1.14125.1.2.23.15
Enable/disable multiple login with same username
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

captive1xLogin 1.3.6.1.4.1.14125.1.2.23.16
Enable/disable to use 1x login when available
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

radiusclientActive 1.3.6.1.4.1.14125.1.2.24.1
Enable/disable RADIUS client service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

radiusclientNasid 1.3.6.1.4.1.14125.1.2.24.2
RADIUS attribute
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

radiusclientCalledstationid 1.3.6.1.4.1.14125.1.2.24.3
RADIUS attribute
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

radiusclientNasport 1.3.6.1.4.1.14125.1.2.24.4
RADIUS attribute.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

radiusclientNasporttype 1.3.6.1.4.1.14125.1.2.24.5
RADIUS attribute.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

radiusclientInterimupdate 1.3.6.1.4.1.14125.1.2.24.6
Interim update interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

radiusclientTable 1.3.6.1.4.1.14125.1.2.24.7
This table display the Servers entry of the RADIUS client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RadiusclientTableEntry

radiusclientTableEntry 1.3.6.1.4.1.14125.1.2.24.7.1
Represent the entry in the RADIUS client table.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadiusclientTableEntry  

radiusclientTableIndex 1.3.6.1.4.1.14125.1.2.24.7.1.1
Specify the index of the RADIUS client table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..8  

radiusclientTableServername 1.3.6.1.4.1.14125.1.2.24.7.1.2
The server name of the RADIUS client.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

radiusclientTableServertype 1.3.6.1.4.1.14125.1.2.24.7.1.3
The server type: authenticate or accounting.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER authenticate(1), accounting(2)  

radiusclientTableServerport 1.3.6.1.4.1.14125.1.2.24.7.1.4
The server port of the RADIUS client.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

radiusclientTableServersecret 1.3.6.1.4.1.14125.1.2.24.7.1.5
Share secret of the radius client.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

radiusclientTableComment 1.3.6.1.4.1.14125.1.2.24.7.1.6
An optional comment associated to entry of the RADIUS client table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

radiusclientTableActive 1.3.6.1.4.1.14125.1.2.24.7.1.7
The status of the RADIUS client table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

radiusclientTableRowStatus 1.3.6.1.4.1.14125.1.2.24.7.1.8
The row status in the RADIUS client table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

httpdActive 1.3.6.1.4.1.14125.1.2.25.1
Enable/disable the webbased management
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

httpdPort 1.3.6.1.4.1.14125.1.2.25.2
The HTTPD port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

httpdUsername 1.3.6.1.4.1.14125.1.2.25.3
The admin username
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

httpdPassword 1.3.6.1.4.1.14125.1.2.25.4
The admin password
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

httpdAccessctrl 1.3.6.1.4.1.14125.1.2.25.5
Enable/disable the Access Control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

httpdTable 1.3.6.1.4.1.14125.1.2.25.6
This table display the access control of the HTTPD Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HttpdTableEntry

httpdTableEntry 1.3.6.1.4.1.14125.1.2.25.6.1
Represent the entry in the HTTPD table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HttpdTableEntry  

httpdTableIndex 1.3.6.1.4.1.14125.1.2.25.6.1.1
Specify the index of the HTTPD table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..64  

httpdTableDevice 1.3.6.1.4.1.14125.1.2.25.6.1.2
Allow access from device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

httpdTableSubnet 1.3.6.1.4.1.14125.1.2.25.6.1.3
Allow access from network
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

httpdTableNetmask 1.3.6.1.4.1.14125.1.2.25.6.1.4
Netmask for the subnet
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

httpdTableDevnet 1.3.6.1.4.1.14125.1.2.25.6.1.5
Define the type HTTPD Table entry: Use device or network
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER device(1), network(2)  

httpdTableComment 1.3.6.1.4.1.14125.1.2.25.6.1.6
An optional comment associated to entry of the HTTPD table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

httpdTableActive 1.3.6.1.4.1.14125.1.2.25.6.1.7
The status of the HTTPD table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

httpdTableRowStatus 1.3.6.1.4.1.14125.1.2.25.6.1.8
The row status in the HTTPD table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

httpdCertPassword 1.3.6.1.4.1.14125.1.2.25.7
The certificate password
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

snmpdActive 1.3.6.1.4.1.14125.1.2.26.1
Enable/disable the SNMPD management
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

snmpdVersion 1.3.6.1.4.1.14125.1.2.26.2
The SNMP Version
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1o2c(1), v3(2), all(3)  

snmpdPort 1.3.6.1.4.1.14125.1.2.26.3
SNMPD Port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

snmpdReadcommunity 1.3.6.1.4.1.14125.1.2.26.4
The read-only Community for SNMP v1 or v2c user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..32)  

snmpdWritecommunity 1.3.6.1.4.1.14125.1.2.26.5
The read-write Community for SNMP v1 or v2c user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..32)  

snmpdReadusername 1.3.6.1.4.1.14125.1.2.26.6
The read-only Username for SNMP v3 user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..50)  

snmpdWriteusername 1.3.6.1.4.1.14125.1.2.26.7
The read-write Username for SNMP v3 user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..50)  

snmpdPassword 1.3.6.1.4.1.14125.1.2.26.8
The authentication password for SNMP v3 user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..50)  

snmpdPassphrase 1.3.6.1.4.1.14125.1.2.26.9
The private passphrase for SNMP v3 user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..50)  

snmpdAccessctrl 1.3.6.1.4.1.14125.1.2.26.10
Enable/disable the SNMPD access control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

snmpdTable 1.3.6.1.4.1.14125.1.2.26.11
This table display the access control of the SNMPD Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpdTableEntry

snmpdTableEntry 1.3.6.1.4.1.14125.1.2.26.11.1
Represent the entry in the SNMPD table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpdTableEntry  

snmpdTableIndex 1.3.6.1.4.1.14125.1.2.26.11.1.1
Specify the index of the SNMPD table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..64  

snmpdTableDevice 1.3.6.1.4.1.14125.1.2.26.11.1.2
Allow access from device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

snmpdTableSubnet 1.3.6.1.4.1.14125.1.2.26.11.1.3
Allow access from network
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

snmpdTableNetmask 1.3.6.1.4.1.14125.1.2.26.11.1.4
Netmask for the subnet
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

snmpdTableDevnet 1.3.6.1.4.1.14125.1.2.26.11.1.5
Define the type SNMPD Table entry: Use device or network
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER device(1), network(2)  

snmpdTableComment 1.3.6.1.4.1.14125.1.2.26.11.1.6
An optional comment associated to entry of the SNMPD table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

snmpdTableActive 1.3.6.1.4.1.14125.1.2.26.11.1.7
The status of the SNMPD table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

snmpdTableRowStatus 1.3.6.1.4.1.14125.1.2.26.11.1.8
The row status in the SNMPD table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

trapActive 1.3.6.1.4.1.14125.1.2.27.1
Enable/disable Trap management of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapConfiguration 1.3.6.1.4.1.14125.1.2.27.2
Enable/disable the trap on Configuration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapSecurity 1.3.6.1.4.1.14125.1.2.27.3
Enable/disable the trap on Security
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapWireless 1.3.6.1.4.1.14125.1.2.27.4
Enable/disable the trap on Wireless
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapOperational 1.3.6.1.4.1.14125.1.2.27.5
Enable/disable the trap on operational
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapFlash 1.3.6.1.4.1.14125.1.2.27.6
Enable/disable the trap on flash
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapTftp 1.3.6.1.4.1.14125.1.2.27.7
Enable/disable the trap on TFTP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapImage 1.3.6.1.4.1.14125.1.2.27.8
Enable/disable the trap on Image
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapAuthentication 1.3.6.1.4.1.14125.1.2.27.9
Enable/disable the trap on authentication failure
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapTable 1.3.6.1.4.1.14125.1.2.27.10
This table display the SNMP Trap Host Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapTableEntry

trapTableEntry 1.3.6.1.4.1.14125.1.2.27.10.1
Represent the entry in the SNMP Trap Host table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapTableEntry  

trapTableIndex 1.3.6.1.4.1.14125.1.2.27.10.1.1
Specify the index of the SNMP Trap Host Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..8  

trapTableIp 1.3.6.1.4.1.14125.1.2.27.10.1.2
The destination IP Address of the SNMP Trap Host Table entry
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

trapTableCommunity 1.3.6.1.4.1.14125.1.2.27.10.1.3
The community of the remote SNMP Host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0|4..32)  

trapTableUsername 1.3.6.1.4.1.14125.1.2.27.10.1.4
The username of the SNMP v3 trap manager.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0|8..50)  

trapTableAuthpasswd 1.3.6.1.4.1.14125.1.2.27.10.1.5
The authentication password of the SNMP v3 trap manager.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0|8..50)  

trapTablePrivpasswd 1.3.6.1.4.1.14125.1.2.27.10.1.6
The privacy password of the SNMP v3 trap manager.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0|8..50)  

trapTableVersion 1.3.6.1.4.1.14125.1.2.27.10.1.7
The SNMP version used by the remote trap manager.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER version2c(1), version3(2)  

trapTableComment 1.3.6.1.4.1.14125.1.2.27.10.1.8
An optional comment associated to entry of the SNMP Trap Host table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

trapTableActive 1.3.6.1.4.1.14125.1.2.27.10.1.9
The status of the SNMP Trap Host table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapTableRowStatus 1.3.6.1.4.1.14125.1.2.27.10.1.10
The row status in the SNMP Trap Host table entry
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ddnsActive 1.3.6.1.4.1.14125.1.2.28.1
Enable/disable Dynamic DNS service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ddnsServer 1.3.6.1.4.1.14125.1.2.28.2
Select the Dynamic DNS provider
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dyndns(1), easydns(2), no-ip(3), zoneedit(4), tzo(5)  

ddnsHostname 1.3.6.1.4.1.14125.1.2.28.3
The hostname associated with the service provider
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..512)  

ddnsUsername 1.3.6.1.4.1.14125.1.2.28.4
The username
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

ddnsPassword 1.3.6.1.4.1.14125.1.2.28.5
The password
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

zeroconfigActive 1.3.6.1.4.1.14125.1.2.29.1
Enable/disable Zero Config service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zeroconfigProxyActive 1.3.6.1.4.1.14125.1.2.29.2
Handle Client proxy
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zeroconfigProxyport 1.3.6.1.4.1.14125.1.2.29.3
Port used in proxy login
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1000..65535  

zeroconfigStaticipActive 1.3.6.1.4.1.14125.1.2.29.4
Handle static ip client
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

signallevelExecute 1.3.6.1.4.1.14125.1.2.30.1
A command to execute the RSSI update
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

signallevelTable 1.3.6.1.4.1.14125.1.2.30.2
This table contains the list of signal level between the node and its neighbour nodes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SignallevelTableEntry

signallevelTableEntry 1.3.6.1.4.1.14125.1.2.30.2.1
Represent the entry in the Signal Level table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SignallevelTableEntry  

signallevelTableIndex 1.3.6.1.4.1.14125.1.2.30.2.1.1
Specify the index of the node Signal Level table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..32  

signallevelTableSource 1.3.6.1.4.1.14125.1.2.30.2.1.2
The source node's IP Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

signallevelTableDestination 1.3.6.1.4.1.14125.1.2.30.2.1.3
The destination node's IP Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

signallevelTableRssi 1.3.6.1.4.1.14125.1.2.30.2.1.4
The singal level between the source node and destination node in RSSI.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTable 1.3.6.1.4.1.14125.1.2.30.3
This table contains the list of clients info of the nodes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClientInfoTableEntry

clientInfoTableEntry 1.3.6.1.4.1.14125.1.2.30.3.1
Represent the entry in the Client Info table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClientInfoTableEntry  

clientInfoTableIndex 1.3.6.1.4.1.14125.1.2.30.3.1.1
Specify the index of the node Client Info table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4096  

clientInfoTableEssid 1.3.6.1.4.1.14125.1.2.30.3.1.2
The ESSID of the AP
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTableMac 1.3.6.1.4.1.14125.1.2.30.3.1.3
The MAC Address of the client
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTableChannel 1.3.6.1.4.1.14125.1.2.30.3.1.4
The channel of the Client
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTableRate 1.3.6.1.4.1.14125.1.2.30.3.1.5
The speed rate of the client in kbps
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTableRssi 1.3.6.1.4.1.14125.1.2.30.3.1.6
The singal level between the client and node in RSSI.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientInfoTableIdletime 1.3.6.1.4.1.14125.1.2.30.3.1.7
The idle timeout in second of the client.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientStatTable 1.3.6.1.4.1.14125.1.2.30.4
This table contains the details of the clients' statistic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClientStatTableEntry

clientStatTableEntry 1.3.6.1.4.1.14125.1.2.30.4.1
Represent the entry in the Client Stat table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClientStatTableEntry  

clientStatTableIndex 1.3.6.1.4.1.14125.1.2.30.4.1.1
Specify the index of the node Client Statistic table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..512  

clientStatTableIp 1.3.6.1.4.1.14125.1.2.30.4.1.2
The IP Address of the clinet
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

clientStatTableMac 1.3.6.1.4.1.14125.1.2.30.4.1.3
The MAC Address of the client
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

clientStatTableTx 1.3.6.1.4.1.14125.1.2.30.4.1.4
The trasmit of the client in bytes count
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientStatTableRx 1.3.6.1.4.1.14125.1.2.30.4.1.5
The receive of the client in bytes count
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientStatTableTxPkt 1.3.6.1.4.1.14125.1.2.30.4.1.6
The transmit of the client in packets count..
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientStatTableRxPkt 1.3.6.1.4.1.14125.1.2.30.4.1.7
The receive of the client in packets count..
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientStatTableOnlinetime 1.3.6.1.4.1.14125.1.2.30.4.1.8
The Online time of the client in 'HH:MM:SS'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipsecActive 1.3.6.1.4.1.14125.1.2.31.1
Enable the IP Sec service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipsecType 1.3.6.1.4.1.14125.1.2.31.2
Select the type of the IP Sec
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER x509(1), rsa(2), psk(3)  

ipsecLocalId 1.3.6.1.4.1.14125.1.2.31.3
Define the local identity.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

ipsecRemoteId 1.3.6.1.4.1.14125.1.2.31.4
Define the remote identity.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

ipsecRemoteIp 1.3.6.1.4.1.14125.1.2.31.5
Define the remote IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipsecRemoteSubnet 1.3.6.1.4.1.14125.1.2.31.6
Define the remote Subnet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipsecRemoteNetmask 1.3.6.1.4.1.14125.1.2.31.7
Define the remote netmask for the subnet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipsecLocalCertpass 1.3.6.1.4.1.14125.1.2.31.8
Define the x.509 certificate pem passphrase.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

ipsecLocalRsa 1.3.6.1.4.1.14125.1.2.31.9
Define the RSA Key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

ipsecRemoteRsa 1.3.6.1.4.1.14125.1.2.31.10
Define the remote RSA Key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

ipsecPsk 1.3.6.1.4.1.14125.1.2.31.11
Define the PSK Key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

l2tpcActive 1.3.6.1.4.1.14125.1.2.32.1
Enable the L2TP Client feature of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

l2tpcLns 1.3.6.1.4.1.14125.1.2.32.2
Define the L2TP LNS address (Type: DNS String)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

l2tpcUsername 1.3.6.1.4.1.14125.1.2.32.3
The username of the L2TP Client
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

l2tpcSecret 1.3.6.1.4.1.14125.1.2.32.4
The secret key of the L2TP Client
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

autoipActive 1.3.6.1.4.1.14125.1.2.33.1
Enable the auto IP service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autoipMeship 1.3.6.1.4.1.14125.1.2.33.2
The prefix of the mesh IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

autoipVlanip 1.3.6.1.4.1.14125.1.2.33.3
The prefix of the vlan IP Address
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

interfacesTable 1.3.6.1.4.1.14125.1.2.34.1
This table contains the list of interfaces name of the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InterfacesTableEntry

interfacesTableEntry 1.3.6.1.4.1.14125.1.2.34.1.1
Represent the entry in the Interfaces table.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfacesTableEntry  

interfacesTableIndex 1.3.6.1.4.1.14125.1.2.34.1.1.1
Specify the index of the interfaces table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..64  

interfacesTableDev 1.3.6.1.4.1.14125.1.2.34.1.1.2
The name of the interfaces
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

interfacesTableLabel 1.3.6.1.4.1.14125.1.2.34.1.1.3
The label of the interfaces
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mlrdActive 1.3.6.1.4.1.14125.1.2.35.1
Enable the MLRD service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mlrdNetname 1.3.6.1.4.1.14125.1.2.35.2
The Mobile IP Network name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

mlrdBackupActive 1.3.6.1.4.1.14125.1.2.35.3
Enable the MLRD backup server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mlrdRole 1.3.6.1.4.1.14125.1.2.35.4
The role of the server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), backup(2)  

mlrdPeer 1.3.6.1.4.1.14125.1.2.35.5
Primary/Secondary Server address depends on current role
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

mlrdBackupInterval 1.3.6.1.4.1.14125.1.2.35.6
The backup interval, in minute.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..9999  

mlrdStaticActive 1.3.6.1.4.1.14125.1.2.35.7
Enable or disable the static entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mlrdTable 1.3.6.1.4.1.14125.1.2.35.8
The MLRD Static entry table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MlrdTableEntry

mlrdTableEntry 1.3.6.1.4.1.14125.1.2.35.8.1
Represent the entry in the MLRD static entry table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MlrdTableEntry  

mlrdTableIndex 1.3.6.1.4.1.14125.1.2.35.8.1.1
Specify the index of the MLRD static entry Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..8  

mlrdTableMac 1.3.6.1.4.1.14125.1.2.35.8.1.2
The static station Mac Address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

mlrdTableIp 1.3.6.1.4.1.14125.1.2.35.8.1.3
The station assigned IP Address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

mlrdTableParent 1.3.6.1.4.1.14125.1.2.35.8.1.4
The station assigned parent.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

mlrdTableDefaultRoute 1.3.6.1.4.1.14125.1.2.35.8.1.5
The station's default route.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

mlrdTableComment 1.3.6.1.4.1.14125.1.2.35.8.1.6
An optional comment associated to entry of the MLRD static entry table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

mlrdTableActive 1.3.6.1.4.1.14125.1.2.35.8.1.7
The status of the MLRD static table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mlrdTableRowStatus 1.3.6.1.4.1.14125.1.2.35.8.1.8
The row status in the MLRD static entry table row
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

routedogActive 1.3.6.1.4.1.14125.1.2.36.1
Enable the route watch dog service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

routedogSsid 1.3.6.1.4.1.14125.1.2.36.2
The SSID used when no default routes
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

routedogInterval 1.3.6.1.4.1.14125.1.2.36.3
Checking interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

routedogReboot 1.3.6.1.4.1.14125.1.2.36.4
Enable the system to reboot when interval count is reached
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

routedogIntervaCount 1.3.6.1.4.1.14125.1.2.36.5
Number of interval before perform system reboot
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

linuxdogActive 1.3.6.1.4.1.14125.1.2.37.1
Enable the Linux Kernel watch dog service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

linuxdogInterval 1.3.6.1.4.1.14125.1.2.37.2
Checking interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

advTunningConntrackMax 1.3.6.1.4.1.14125.1.2.38.1
Max Connection Tracking
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4096..212368  

advTunningConntrackGenericTimeout 1.3.6.1.4.1.14125.1.2.38.2
Connection Tracking generic timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..1200  

advTunningConntrackIcmpTimeout 1.3.6.1.4.1.14125.1.2.38.3
Connection Tracking icmp timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

advTunningConntrackTcpcloseTimeout 1.3.6.1.4.1.14125.1.2.38.4
Connection Tracking TCP close timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..30  

advTunningConntrackTcpclosewaitTimeout 1.3.6.1.4.1.14125.1.2.38.5
Connection Tracking TCP close wait timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..120  

advTunningConntrackTcpestablishTimeout 1.3.6.1.4.1.14125.1.2.38.6
Connection Tracking TCP established timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 600..864000  

advTunningConntrackTcpfinwaitTimeout 1.3.6.1.4.1.14125.1.2.38.7
Connection Tracking TCP finished wait timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..3600  

advTunningConntrackTcplastackTimeout 1.3.6.1.4.1.14125.1.2.38.8
Connection Tracking TCP last ack timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

advTunningConntrackTcpsynrecvTimeout 1.3.6.1.4.1.14125.1.2.38.9
Connection Tracking TCP syn receive timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..120  

advTunningConntrackTcpsynsentTimeout 1.3.6.1.4.1.14125.1.2.38.10
Connection Tracking TCP syn sent timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..240  

advTunningConntrackTcptimewaitTimeout 1.3.6.1.4.1.14125.1.2.38.11
Connection Tracking TCP time wait timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..240  

advTunningConntrackUdpTimeout 1.3.6.1.4.1.14125.1.2.38.12
Connection Tracking UDP timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..60  

advTunningConntrackUdpstreamTimeout 1.3.6.1.4.1.14125.1.2.38.13
Connection Tracking UDP stream timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..360  

advTunningWirelessRadio0Distance 1.3.6.1.4.1.14125.1.2.38.14
Estimate operating distance (meter) 0 - card default
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..10000  

advTunningWirelessRadio1Distance 1.3.6.1.4.1.14125.1.2.38.15
Estimate operating distance (meter) 0 - card default
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..10000  

advTunningWirelessRadio2Distance 1.3.6.1.4.1.14125.1.2.38.16
Estimate operating distance (meter) 0 - card default
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..10000  

advTunningWirelessRadio3Distance 1.3.6.1.4.1.14125.1.2.38.17
Estimate operating distance (meter) 0 - card default
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..10000  

advTunningWirelessRegionDomain 1.3.6.1.4.1.14125.1.2.38.18
The wireless regulatory domain
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..9999  

advTunningWirelessCountry 1.3.6.1.4.1.14125.1.2.38.19
Wireless Country settings
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..9999  

advTunningWirelessOutdoor 1.3.6.1.4.1.14125.1.2.38.20
Operating in Outdoor
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

advTunningWirelessXChannel 1.3.6.1.4.1.14125.1.2.38.21
Enable extended channel mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sshdActive 1.3.6.1.4.1.14125.1.2.39.1
Enable the SSH service of the device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sshdPort 1.3.6.1.4.1.14125.1.2.39.2
The port number of the device use for SSH purpose.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

wmeTable 1.3.6.1.4.1.14125.1.2.40.1
The Wireless Multimedia Extension table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WmeTableEntry

wmeTableEntry 1.3.6.1.4.1.14125.1.2.40.1.1
Represent the entry in the WME table.
Status: current Access: not-accessible
OBJECT-TYPE    
  WmeTableEntry  

wmeTableIndex 1.3.6.1.4.1.14125.1.2.40.1.1.1
Specify the index of the WME Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

wmeTableName 1.3.6.1.4.1.14125.1.2.40.1.1.2
The interface name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

wmeTableCwminBe 1.3.6.1.4.1.14125.1.2.40.1.1.3
CWMIN parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwminBk 1.3.6.1.4.1.14125.1.2.40.1.1.4
CWMIN parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwminVi 1.3.6.1.4.1.14125.1.2.40.1.1.5
CWMIN parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwminVo 1.3.6.1.4.1.14125.1.2.40.1.1.6
CWMIN parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwminBe 1.3.6.1.4.1.14125.1.2.40.1.1.7
BSS_CWMIN parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwminBk 1.3.6.1.4.1.14125.1.2.40.1.1.8
BSS_CWMIN parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwminVi 1.3.6.1.4.1.14125.1.2.40.1.1.9
BSS_CWMIN parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwminVo 1.3.6.1.4.1.14125.1.2.40.1.1.10
BSS_CWMIN parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwmaxBe 1.3.6.1.4.1.14125.1.2.40.1.1.11
CWMAX parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwmaxBk 1.3.6.1.4.1.14125.1.2.40.1.1.12
CWMAX parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwmaxVi 1.3.6.1.4.1.14125.1.2.40.1.1.13
CWMAX parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableCwmaxVo 1.3.6.1.4.1.14125.1.2.40.1.1.14
CWMAX parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwmaxBe 1.3.6.1.4.1.14125.1.2.40.1.1.15
BSS_CWMAX parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwmaxBk 1.3.6.1.4.1.14125.1.2.40.1.1.16
BSS_CWMAX parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwmaxVi 1.3.6.1.4.1.14125.1.2.40.1.1.17
BSS_CWMAX parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssCwmaxVo 1.3.6.1.4.1.14125.1.2.40.1.1.18
BSS_CWMAX parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableAifsnBe 1.3.6.1.4.1.14125.1.2.40.1.1.19
AIFSN parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableAifsnBk 1.3.6.1.4.1.14125.1.2.40.1.1.20
AIFSN parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableAifsnVi 1.3.6.1.4.1.14125.1.2.40.1.1.21
AIFSN parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableAifsnVo 1.3.6.1.4.1.14125.1.2.40.1.1.22
AIFSN parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssAifsnBe 1.3.6.1.4.1.14125.1.2.40.1.1.23
BSS_AIFSN parameter for Best effort class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssAifsnBk 1.3.6.1.4.1.14125.1.2.40.1.1.24
BSS_AIFSN parameter for background class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssAifsnVi 1.3.6.1.4.1.14125.1.2.40.1.1.25
BSS_AIFSN parameter for Video class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableBssAifsnVo 1.3.6.1.4.1.14125.1.2.40.1.1.26
BSS_AIFSN parameter for Voice class
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

wmeTableTxoplimitBe 1.3.6.1.4.1.14125.1.2.40.1.1.27
TXOPLIMIT parameter for Best effort class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableTxoplimitBk 1.3.6.1.4.1.14125.1.2.40.1.1.28
TXOPLIMIT parameter for Background class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableTxoplimitVi 1.3.6.1.4.1.14125.1.2.40.1.1.29
TXOPLIMIT parameter for Video class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableTxoplimitVo 1.3.6.1.4.1.14125.1.2.40.1.1.30
TXOPLIMIT parameter for Voice class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableBssTxoplimitBe 1.3.6.1.4.1.14125.1.2.40.1.1.31
BSS_TXOPLIMIT parameter for Best effort class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableBssTxoplimitBk 1.3.6.1.4.1.14125.1.2.40.1.1.32
BSS_TXOPLIMIT parameter for Background class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableBssTxoplimitVi 1.3.6.1.4.1.14125.1.2.40.1.1.33
BSS_TXOPLIMIT parameter for Video class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableBssTxoplimitVo 1.3.6.1.4.1.14125.1.2.40.1.1.34
BSS_TXOPLIMIT parameter for Voice class (in miliseconds)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

wmeTableAcmBe 1.3.6.1.4.1.14125.1.2.40.1.1.35
Enable / Disable Admission Control for Best effort class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableAcmBk 1.3.6.1.4.1.14125.1.2.40.1.1.36
Enable / Disable Admission Control for Background class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableAcmVi 1.3.6.1.4.1.14125.1.2.40.1.1.37
Enable / Disable Admission Control for Video class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableAcmVo 1.3.6.1.4.1.14125.1.2.40.1.1.38
Enable / Disable Admission Control for Voice class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableNoackpolicyBe 1.3.6.1.4.1.14125.1.2.40.1.1.39
Enable / Disable support for No-ack for Best effort class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableNoackpolicyBk 1.3.6.1.4.1.14125.1.2.40.1.1.40
Enable / Disable support for No-ack for Background class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableNoackpolicyVi 1.3.6.1.4.1.14125.1.2.40.1.1.41
Enable / Disable support for No-ack for Video class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableNoackpolicyVo 1.3.6.1.4.1.14125.1.2.40.1.1.42
Enable / Disable support for No-ack for Voice class.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableComment 1.3.6.1.4.1.14125.1.2.40.1.1.43
An optional comment associated to the WME table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

wmeTableActive 1.3.6.1.4.1.14125.1.2.40.1.1.44
The status of the WME table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmeTableRowStatus 1.3.6.1.4.1.14125.1.2.40.1.1.45
The row status in the WME table row
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tm75Active 1.3.6.1.4.1.14125.1.2.41.1
Enable the TM75 temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tm75Resolution 1.3.6.1.4.1.14125.1.2.41.2
Select the temperature conversion resolution
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pt5c(0), pt25c(1), pt125c(2), pt0625c(3)  

tm75Temperature 1.3.6.1.4.1.14125.1.2.41.3
Current Temperature, with 4 digits floating point (-55..128)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

nmsAddressTable 1.3.6.1.4.1.14125.1.2.42.1
This is the list of NMS servers that will be updated by the AP periodically.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmsAddressTableEntry

nmsAddressTableEntry 1.3.6.1.4.1.14125.1.2.42.1.1
Represent the entry in the NMS Address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NmsAddressTableEntry  

nmsAddressTableIndex 1.3.6.1.4.1.14125.1.2.42.1.1.1
Specify the index of the NMS Address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

nmsAddressTableAddress 1.3.6.1.4.1.14125.1.2.42.1.1.2
The DNS/IP Address of the NMS server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

nmsAddressTablePort 1.3.6.1.4.1.14125.1.2.42.1.1.3
The NMS server port.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

nmsAddressTableInterval 1.3.6.1.4.1.14125.1.2.42.1.1.4
The AP update interval of that particular NMS server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 60..300000  

nmsAddressTableComment 1.3.6.1.4.1.14125.1.2.42.1.1.5
An optional description regarding the entry of the NMS Address table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

nmsAddressTableActive 1.3.6.1.4.1.14125.1.2.42.1.1.6
The status of the NMS Address table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

nmsAddressTableRowStatus 1.3.6.1.4.1.14125.1.2.42.1.1.7
The row status in the NMS Address table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

userDbUsername 1.3.6.1.4.1.14125.1.2.43.1
The username of the user entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

userDbPassword 1.3.6.1.4.1.14125.1.2.43.2
The login password for the username in the User database.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

userDbGroupid 1.3.6.1.4.1.14125.1.2.43.3
The User Group id assign for the user in the database.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userDbAddCmd 1.3.6.1.4.1.14125.1.2.43.4
SnmpSet this item to add the entry to the group, with the parameters stored in the temp folder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2  

userDbEditCmd 1.3.6.1.4.1.14125.1.2.43.5
SnmpSet this item to edit the entry in the group, with the parameters stored in the temp folder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2  

userDbDelCmd 1.3.6.1.4.1.14125.1.2.43.6
SnmpSet the id to delete the entry from the table
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..999999  

userDbTable 1.3.6.1.4.1.14125.1.2.43.7
This table contains the local user database.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserDbTableEntry

userDbTableEntry 1.3.6.1.4.1.14125.1.2.43.7.1
Represent the entry in the local user database table.
Status: current Access: not-accessible
OBJECT-TYPE    
  UserDbTableEntry  

userDbTableIndex 1.3.6.1.4.1.14125.1.2.43.7.1.1
Specify the index of the user group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

userDbTableName 1.3.6.1.4.1.14125.1.2.43.7.1.2
The name of the user
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

userDbTablePassword 1.3.6.1.4.1.14125.1.2.43.7.1.3
The login password for the username
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

userDbTableGid 1.3.6.1.4.1.14125.1.2.43.7.1.4
The group id used for the username
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..999999  

userDbTableStatus 1.3.6.1.4.1.14125.1.2.43.7.1.5
The default download bandwidth of the entry
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), loggedin(2), idle(3), expired(4)  

userGroupId 1.3.6.1.4.1.14125.1.2.44.1
The ID number of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupName 1.3.6.1.4.1.14125.1.2.44.2
The Name of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupLanguage 1.3.6.1.4.1.14125.1.2.44.3
The default language of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupUpload 1.3.6.1.4.1.14125.1.2.44.4
The upload bandwidth of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupDownload 1.3.6.1.4.1.14125.1.2.44.5
The download bandwidth of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupIdleTimeout 1.3.6.1.4.1.14125.1.2.44.6
The default idle timeout of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupSessionTimeout 1.3.6.1.4.1.14125.1.2.44.7
The default session timeout of the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupUrl 1.3.6.1.4.1.14125.1.2.44.8
The default URL to direct to for the user in this User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..512)  

userGroupComment 1.3.6.1.4.1.14125.1.2.44.9
The optional comment for the User Group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupAddCmd 1.3.6.1.4.1.14125.1.2.44.10
SnmpSet this item to add the entry to the group, with the parameters stored in the temp folder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2  

userGroupEditCmd 1.3.6.1.4.1.14125.1.2.44.11
SnmpSet this item to edit the entry in the group, with the parameters stored in the temp folder
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2  

userGroupDelCmd 1.3.6.1.4.1.14125.1.2.44.12
SnmpSet the id to delete the entry from the group
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..999999  

userGroupTable 1.3.6.1.4.1.14125.1.2.44.13
This table contains the local user group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserGroupTableEntry

userGroupTableEntry 1.3.6.1.4.1.14125.1.2.44.13.1
Represent the entry in the user group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  UserGroupTableEntry  

userGroupTableIndex 1.3.6.1.4.1.14125.1.2.44.13.1.1
Specify the index of the user group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16  

userGroupTableGid 1.3.6.1.4.1.14125.1.2.44.13.1.2
The group id of the entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..999999  

userGroupTableName 1.3.6.1.4.1.14125.1.2.44.13.1.3
The group name of the entry
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupTableLanguage 1.3.6.1.4.1.14125.1.2.44.13.1.4
The group's default language of the entry
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

userGroupTableUpload 1.3.6.1.4.1.14125.1.2.44.13.1.5
The default upload bandwidth of the entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 32..300000  

userGroupTableDownload 1.3.6.1.4.1.14125.1.2.44.13.1.6
The default download bandwidth of the entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 32..300000  

userGroupTableIdleTimeout 1.3.6.1.4.1.14125.1.2.44.13.1.7
The default idle timeout of the entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..300000  

userGroupTableSessTimeout 1.3.6.1.4.1.14125.1.2.44.13.1.8
The default session timeout of the entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..300000  

userGroupTableUrl 1.3.6.1.4.1.14125.1.2.44.13.1.9
The redirect URL for the entry
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..512)  

userGroupTableComment 1.3.6.1.4.1.14125.1.2.44.13.1.10
The group's optional comment
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

statickeyWifi0Key0 1.3.6.1.4.1.14125.1.2.45.1
Static Key 0 for Wifi0
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi0Key1 1.3.6.1.4.1.14125.1.2.45.2
Static Key 1 for Wifi0
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi0Key2 1.3.6.1.4.1.14125.1.2.45.3
Static Key 2 for Wifi0
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi0Key3 1.3.6.1.4.1.14125.1.2.45.4
Static Key 3 for Wifi0
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi1Key0 1.3.6.1.4.1.14125.1.2.45.5
Static Key 0 for Wifi1
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi1Key1 1.3.6.1.4.1.14125.1.2.45.6
Static Key 1 for Wifi1
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi1Key2 1.3.6.1.4.1.14125.1.2.45.7
Static Key 2 for Wifi1
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

statickeyWifi1Key3 1.3.6.1.4.1.14125.1.2.45.8
Static Key 3 for Wifi1
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

dhcrelayActive 1.3.6.1.4.1.14125.1.2.46.1
Enable/Disable the DHCP Relay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcrelayPort 1.3.6.1.4.1.14125.1.2.46.2
DHCP Relay Port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

dhcrelayHopcount 1.3.6.1.4.1.14125.1.2.46.3
Maximum hop count before the packet is dropped.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

dhcrelayPktsize 1.3.6.1.4.1.14125.1.2.46.4
Maximum Packet size for the DHCP discover.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 600..1400  

dhcrelayTable 1.3.6.1.4.1.14125.1.2.46.5
This is the DHCP Relay table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcrelayTableEntry

dhcrelayTableEntry 1.3.6.1.4.1.14125.1.2.46.5.1
Represent the entry in the DHCP Relay table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcrelayTableEntry  

dhcrelayTableIndex 1.3.6.1.4.1.14125.1.2.46.5.1.1
Specify the index of the DHCP Relay table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..32  

dhcrelayTableType 1.3.6.1.4.1.14125.1.2.46.5.1.2
The type of this DHCP Relay table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER server(1), interface(2)  

dhcrelayTableExtra 1.3.6.1.4.1.14125.1.2.46.5.1.3
Extra information for the type, eg for server(1)-ip address, or interface(2)-interface name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

dhcrelayTableComments 1.3.6.1.4.1.14125.1.2.46.5.1.4
An optional description regarding the entry of the DHCP Relay table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

dhcrelayTableActive 1.3.6.1.4.1.14125.1.2.46.5.1.5
The status of the DHCP Relay table entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcrelayTableRowStatus 1.3.6.1.4.1.14125.1.2.46.5.1.6
The row status in the DHCP Relay table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

multicastActive 1.3.6.1.4.1.14125.1.2.47.1
Enable/Disable the Multicast.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ospfdActive 1.3.6.1.4.1.14125.1.2.48.1
Enable/Disable the OSPF.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ebtablesActive 1.3.6.1.4.1.14125.1.2.49.1
Enable/Disable the ebtables.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ebTable 1.3.6.1.4.1.14125.1.2.49.2
This is the Ebtable rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbTableEntry

ebTableEntry 1.3.6.1.4.1.14125.1.2.49.2.1
Represent the entry in the ebtables.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbTableEntry  

ebTableIndex 1.3.6.1.4.1.14125.1.2.49.2.1.1
Specify the index of the ebtables.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..64  

ebTableTarget 1.3.6.1.4.1.14125.1.2.49.2.1.2
Select the type of this rule: allow or deny .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

ebTableSrcIface 1.3.6.1.4.1.14125.1.2.49.2.1.3
Source Interface
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

ebTableDstIface 1.3.6.1.4.1.14125.1.2.49.2.1.4
Destination Interface
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

ebTableMatchMac 1.3.6.1.4.1.14125.1.2.49.2.1.5
Enable or disable the MAC matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ebTableSrcMac 1.3.6.1.4.1.14125.1.2.49.2.1.6
Source MAC Address
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ebTableDstMac 1.3.6.1.4.1.14125.1.2.49.2.1.7
Destination MAC Address
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

ebTableProtocol 1.3.6.1.4.1.14125.1.2.49.2.1.8
The protocol type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), arp(2), e802dot1q(3), ppp(4)  

ebTableSrcIp 1.3.6.1.4.1.14125.1.2.49.2.1.9
Source IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ebTableSrcMask 1.3.6.1.4.1.14125.1.2.49.2.1.10
Source netmask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ebTableDstIp 1.3.6.1.4.1.14125.1.2.49.2.1.11
Destination IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ebTableDstMask 1.3.6.1.4.1.14125.1.2.49.2.1.12
Destination netmask
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ebTableIpProt 1.3.6.1.4.1.14125.1.2.49.2.1.13
The protocol type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER icmp(1), tcp(6), udp(17)  

ebTableSrcPortStart 1.3.6.1.4.1.14125.1.2.49.2.1.14
Start of Source port
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65536  

ebTableSrcPortEnd 1.3.6.1.4.1.14125.1.2.49.2.1.15
End of Source port
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65536  

ebTableDstPortStart 1.3.6.1.4.1.14125.1.2.49.2.1.16
Start of Destination port
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65536  

ebTableDstPortEnd 1.3.6.1.4.1.14125.1.2.49.2.1.17
End of Destination port
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65536  

ebTableVlanid 1.3.6.1.4.1.14125.1.2.49.2.1.18
VLAN ID
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4096  

ebTableComments 1.3.6.1.4.1.14125.1.2.49.2.1.19
Optional comment
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

ebTableActive 1.3.6.1.4.1.14125.1.2.49.2.1.20
The status of the ebtables entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ebTableRowStatus 1.3.6.1.4.1.14125.1.2.49.2.1.21
The row status in the ebtable entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

rebootTime 1.3.6.1.4.1.14125.1.3.1.1
Set a value of timeout (1~300, in seconds) and reboot the device.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..300  

resetToDefault 1.3.6.1.4.1.14125.1.3.2.1
SnmpSet this command to reset the device back to factory default value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

uploadDownloadFilename 1.3.6.1.4.1.14125.1.3.3.1
The name of the file that wished to be upload/download through TFTP
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

uploadDownloadFiletype 1.3.6.1.4.1.14125.1.3.3.2
The type of the file
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER config(1), firmware(2), ipx509local(3), ipx509remote(4), iprsa(5)  

uploadDownloadIpaddress 1.3.6.1.4.1.14125.1.3.3.3
The TFTP IP Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

uploadDownloadPassword 1.3.6.1.4.1.14125.1.3.3.4
The password used for extract the certificate file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

uploadDownloadOperationtype 1.3.6.1.4.1.14125.1.3.3.5
The type of TFTP operation to be done
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER download(1), upload(2), uploadandreboot(3)  

uploadDownloadExecutetftp 1.3.6.1.4.1.14125.1.3.3.6
Execute the TFTP operation by setting this command to value 1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER execute(1)  

logoutAndBlockAction 1.3.6.1.4.1.14125.1.3.4.1
SnmpSet to logout and block the user with the IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

restartSnmpService 1.3.6.1.4.1.14125.1.3.5.1
SnmpSet to restart the SNMP Service.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor