EMPIRE-SVCRSP

File: EMPIRE-SVCRSP.mib (25846 bytes)

Imported modules

RFC-1212 RFC1213-MIB RFC1155-SMI

Imported symbols

OBJECT-TYPE DisplayString enterprises
TimeTicks Counter

Defined Types

SvcRspTableEntry  
SEQUENCE    
  svcRspTableIndex INTEGER
  svcRspTableDescr DisplayString
  svcRspTableSvc INTEGER
  svcRspTableArgs DisplayString
  svcRspTableInterval INTEGER
  svcRspTableSamplesPerInterval INTEGER
  svcRspTableTimeout INTEGER
  svcRspTableStatsWindow INTEGER
  svcRspTableStatus INTEGER
  svcRspTableLastUpdate TimeTicks
  svcRspTableNumSamples Counter
  svcRspTableTotalLastSample INTEGER
  svcRspTableTotalMin INTEGER
  svcRspTableTotalMax INTEGER
  svcRspTableTotalMean INTEGER
  svcRspTableTotalVariance INTEGER
  svcRspTableTotalAvailability INTEGER
  svcRspTableNameLastSample INTEGER
  svcRspTableNameMin INTEGER
  svcRspTableNameMax INTEGER
  svcRspTableNameMean INTEGER
  svcRspTableNameVariance INTEGER
  svcRspTableConnLastSample INTEGER
  svcRspTableConnMin INTEGER
  svcRspTableConnMax INTEGER
  svcRspTableConnMean INTEGER
  svcRspTableConnVariance INTEGER
  svcRspTableTranLastSample INTEGER
  svcRspTableTranMin INTEGER
  svcRspTableTranMax INTEGER
  svcRspTableTranMean INTEGER
  svcRspTableTranVariance INTEGER
  svcRspTableBytesInLastSample INTEGER
  svcRspTableBytesOutLastSample INTEGER
  svcRspTableTotalBytesIn INTEGER
  svcRspTableTotalBytesOut INTEGER
  svcRspTableThroughput INTEGER
  svcRspTableResults INTEGER
  svcRspTableErrorCode INTEGER
  svcRspTableTOSField INTEGER
  svcRspTableFlags INTEGER
  svcRspTableLimit INTEGER
  svcRspTableUsername DisplayString
  svcRspTablePassword DisplayString
  svcRspTableDest DisplayString
  svcRspTableTotalErrors Counter
  svcRspTableSamplesInWindow INTEGER
  svcRspTableSuccessesInWindow INTEGER

Defined Values

empire 1.3.6.1.4.1.546
OBJECT IDENTIFIER    

applications 1.3.6.1.4.1.546.16
OBJECT IDENTIFIER    

svcRsp 1.3.6.1.4.1.546.16.6
OBJECT IDENTIFIER    

svcRspVersion 1.3.6.1.4.1.546.16.6.1
Description and version number of this module
OBJECT-TYPE    
  DisplayString  

svcRspPID 1.3.6.1.4.1.546.16.6.2
Process ID of the svcrsp sub-program.
OBJECT-TYPE    
  INTEGER  

svcRspModMode 1.3.6.1.4.1.546.16.6.3
This object indicates if the module is in full-mode or restricted-mode. Restricted-mode is entered, when SystemEDGE 4.0 and higher, fails to find a valid license. Once a valid license has been allocated and set, the module will then transition to fullMode(1)
OBJECT-TYPE    
  INTEGER fullMode(1), restrictedMode(2)  

svcRspTable 1.3.6.1.4.1.546.16.6.10
This table describes the service response time measurements being conducted by this Application Management Moudle.
OBJECT-TYPE    
  SEQUENCE OF  
    SvcRspTableEntry

svcRspTableEntry 1.3.6.1.4.1.546.16.6.10.1
An entry in the service response measurement table.
OBJECT-TYPE    
  SvcRspTableEntry  

svcRspTableIndex 1.3.6.1.4.1.546.16.6.10.1.1
The index of this service response time table entry
OBJECT-TYPE    
  INTEGER  

svcRspTableDescr 1.3.6.1.4.1.546.16.6.10.1.2
Description of this service-response monitoring entry. Limit of 256 characters.
OBJECT-TYPE    
  DisplayString Size(0..256)  

svcRspTableSvc 1.3.6.1.4.1.546.16.6.10.1.3
The type of service being measured.
OBJECT-TYPE    
  INTEGER nntp(1), dns(2), pop3(3), http(4), ftp(5), smtp(6), ping(7), tcpconnect(8), custom(9), https(10), imap(11), roundTripEmail(12), virtualUserTest(13), nis(14), tftp(15), dhcp(16), mapi(17), ldap(18), activeDirectory(19), sqlQuery(20), snmp(21), fileIO(22)  

svcRspTableArgs 1.3.6.1.4.1.546.16.6.10.1.4
Service-specific arguments used for measuring purposes. Limit of 256 characters. Example service arguments are: dns: dns-server hostname http: URL [proxy-server] [username:user password:pass] ftp: ftp-server username passwd pop3: pop3-server username passwd nntp: nntp-server smtp: smtp-server ping: system-name packetsize tcpconnect: system-name port custom: script-name https: URL [proxy-server] [username:user password:pass]
OBJECT-TYPE    
  DisplayString Size(0..256)  

svcRspTableInterval 1.3.6.1.4.1.546.16.6.10.1.5
The time interval between queries to the service.
OBJECT-TYPE    
  INTEGER  

svcRspTableSamplesPerInterval 1.3.6.1.4.1.546.16.6.10.1.6
The number of samples taken at each query interval. For instance, if this value is set to 3 and svcRspTableInterval is set to 60 then after every 60 second interval, 3 sample transactions will be performed.
OBJECT-TYPE    
  INTEGER  

svcRspTableTimeout 1.3.6.1.4.1.546.16.6.10.1.7
The value (in seconds) after which service response time measurement should timeout for this particular service measurement.
OBJECT-TYPE    
  INTEGER  

svcRspTableStatsWindow 1.3.6.1.4.1.546.16.6.10.1.8
The period (in seconds) over which response time statisics (e.g. mean, availability) for the particular service are calculated.
OBJECT-TYPE    
  INTEGER  

svcRspTableStatus 1.3.6.1.4.1.546.16.6.10.1.9
The status of this entry. This variable is equivalent in semantics to the SNMPv2 SMI RowStatus convention (see RFC 1443).
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

svcRspTableLastUpdate 1.3.6.1.4.1.546.16.6.10.1.10
The time (based on sysUpTime) that these counters and statistics were last updated.
OBJECT-TYPE    
  TimeTicks  

svcRspTableNumSamples 1.3.6.1.4.1.546.16.6.10.1.11
The total number of samples taken since this row was initialized.
OBJECT-TYPE    
  Counter  

svcRspTableTotalLastSample 1.3.6.1.4.1.546.16.6.10.1.12
The total response time (in milliseconds) of the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalMin 1.3.6.1.4.1.546.16.6.10.1.13
The minimum total response time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalMax 1.3.6.1.4.1.546.16.6.10.1.14
The maximum total response time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalMean 1.3.6.1.4.1.546.16.6.10.1.15
The mean total response time value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalVariance 1.3.6.1.4.1.546.16.6.10.1.16
The variance of the total response time values over the statistics window * 1000. A variance value of 1.337 would be returned by SA as 1337. The variance is calculated based on seconds, instead of milliseconds.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalAvailability 1.3.6.1.4.1.546.16.6.10.1.17
The availability of this service. This is calculated as the number of successful service queries divided by the number of service queries over the statistics window. A service query is successful if it succeeds within the timeout value specified for this entry.
OBJECT-TYPE    
  INTEGER  

svcRspTableNameLastSample 1.3.6.1.4.1.546.16.6.10.1.18
The name lookup (DNS) time (in milliseconds) of the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableNameMin 1.3.6.1.4.1.546.16.6.10.1.19
The minimum name lookup time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableNameMax 1.3.6.1.4.1.546.16.6.10.1.20
The maximum name lookup time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableNameMean 1.3.6.1.4.1.546.16.6.10.1.21
The mean name lookup time value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableNameVariance 1.3.6.1.4.1.546.16.6.10.1.22
The variance of the name lookup time values over the statistics window. The variance is calculated based on seconds, instead of milliseconds.
OBJECT-TYPE    
  INTEGER  

svcRspTableConnLastSample 1.3.6.1.4.1.546.16.6.10.1.23
The connection time (in milliseconds) of the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableConnMin 1.3.6.1.4.1.546.16.6.10.1.24
The minimum connection time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableConnMax 1.3.6.1.4.1.546.16.6.10.1.25
The maximum connection time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableConnMean 1.3.6.1.4.1.546.16.6.10.1.26
The mean connection time value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableConnVariance 1.3.6.1.4.1.546.16.6.10.1.27
The variance of the connection time values over the statistics window. The variance is calculated based on seconds, instead of milliseconds.
OBJECT-TYPE    
  INTEGER  

svcRspTableTranLastSample 1.3.6.1.4.1.546.16.6.10.1.28
The transaction time (in milliseconds) of the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableTranMin 1.3.6.1.4.1.546.16.6.10.1.29
The minimum transaction time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTranMax 1.3.6.1.4.1.546.16.6.10.1.30
The maximum transaction time sample value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTranMean 1.3.6.1.4.1.546.16.6.10.1.31
The mean transaction time value over the statistics window.
OBJECT-TYPE    
  INTEGER  

svcRspTableTranVariance 1.3.6.1.4.1.546.16.6.10.1.32
The variance of the transaction time values over the statistics window. The variance is calculated based on seconds, instead of milliseconds.
OBJECT-TYPE    
  INTEGER  

svcRspTableBytesInLastSample 1.3.6.1.4.1.546.16.6.10.1.33
The number of bytes received in the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableBytesOutLastSample 1.3.6.1.4.1.546.16.6.10.1.34
The number of bytes sent in the last sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalBytesIn 1.3.6.1.4.1.546.16.6.10.1.35
The total number of bytes received since SA was started. It should be noted that this counter will eventually wrap.
OBJECT-TYPE    
  INTEGER  

svcRspTableTotalBytesOut 1.3.6.1.4.1.546.16.6.10.1.36
The total number of bytes sent since SA was started. It should be noted that this Counter will eventually wrap.
OBJECT-TYPE    
  INTEGER  

svcRspTableThroughput 1.3.6.1.4.1.546.16.6.10.1.37
The throughput, calculated over the statistics window, in bytes/sec. The BytesInLastSample and BytesOutLastSample will be added together for each sample. This number for each sample will be summed, and divided by the number of seconds in the sample.
OBJECT-TYPE    
  INTEGER  

svcRspTableResults 1.3.6.1.4.1.546.16.6.10.1.38
The results of the test. This field indicates non-error results, and the values are specific to each test type.
OBJECT-TYPE    
  INTEGER  

svcRspTableErrorCode 1.3.6.1.4.1.546.16.6.10.1.39
The error code returned by the test. The values are specific to each test type. When possible, the standard numeric error codes for each test will be used (e.g. HTTP 404).
OBJECT-TYPE    
  INTEGER  

svcRspTableTOSField 1.3.6.1.4.1.546.16.6.10.1.40
This field allows the user to set the 8-bit TOS header in the IP header for each test. We will not enforce any particular RFC standard for the value of this field. It will be totally up to the user to decide an appropriate value.
OBJECT-TYPE    
  INTEGER 0..255  

svcRspTableFlags 1.3.6.1.4.1.546.16.6.10.1.41
Reserved for future use as a bitmask field for toggle options
OBJECT-TYPE    
  INTEGER  

svcRspTableLimit 1.3.6.1.4.1.546.16.6.10.1.42
This is the eHealth Response limit, used as a boundry for throwing exceptions
OBJECT-TYPE    
  INTEGER  

svcRspTableUsername 1.3.6.1.4.1.546.16.6.10.1.43
For tests that require a login, the username is here instead of in the args field as in versions prior to 1.3
OBJECT-TYPE    
  DisplayString Size(0..256)  

svcRspTablePassword 1.3.6.1.4.1.546.16.6.10.1.44
For tests that require a login, the password is here instead of in the args field as in versions prior to 1.3
OBJECT-TYPE    
  DisplayString Size(0..256)  

svcRspTableDest 1.3.6.1.4.1.546.16.6.10.1.45
For all tests, the target / destination is now stored here instead of in the args field.
OBJECT-TYPE    
  DisplayString Size(0..256)  

svcRspTableTotalErrors 1.3.6.1.4.1.546.16.6.10.1.46
This is the total number of errors, of all types, that this test has encountered over it's lifetime
OBJECT-TYPE    
  Counter  

svcRspTableSamplesInWindow 1.3.6.1.4.1.546.16.6.10.1.47
This is the total number of samples represented by the status window. A 300 second window on a test with a 30 second interval would be 10, with the exception of during start up, and when a test is thrown out.
OBJECT-TYPE    
  INTEGER  

svcRspTableSuccessesInWindow 1.3.6.1.4.1.546.16.6.10.1.48
This is the total number of successes within the status window for this test.
OBJECT-TYPE    
  INTEGER  

svcRspUnusedIndex 1.3.6.1.4.1.546.16.6.11
An SNMP Get of this MIB object returns an un-used svcrsp Table index number. It can be used for svcrsp table row creation optimization.
OBJECT-TYPE    
  INTEGER 1..2147483647  

svcRspMatchDescr 1.3.6.1.4.1.546.16.6.12
This MIB object, when used in conjunction with svcRspEventMatchIndex can be used to quickly determine the index number corresponding to a particular entry description. SNMP Set'ing a description to this MIB object causes the agent to search through entries in the svcrsp table and place the index value of the last entry whose description matches, in the svcRspMatchIndex MIB object. If the description is not found, then 0 is placed in svcRspEventMatchIndex.
OBJECT-TYPE    
  DisplayString  

svcRspMatchIndex 1.3.6.1.4.1.546.16.6.13
See description for svcRspMatchDescr.
OBJECT-TYPE    
  INTEGER 1..2147483647  

svcRspNumTests 1.3.6.1.4.1.546.16.6.14
This is the number of tests currently running on the agent. This may be greater than the number seen in eHealth, as it includes manually configured tests. This number should never be lower than the number of tests seen in eHealth.
OBJECT-TYPE    
  INTEGER  

svcRspMaxThreads 1.3.6.1.4.1.546.16.6.15
This is the maximum number of threads that the collector is allowed to run. Each thread executes a test, so multiple threads allows for tests to run concurrently.
OBJECT-TYPE    
  INTEGER  

svcRspSecurityFlags 1.3.6.1.4.1.546.16.6.16
This is a bitmask for displaying various security settings: Bit 0: Security settings hidden. If this bit is set, all others will be set to 0 Bit 1: Allow Custom/Virtual User tests Bit 2: Allow File I/O tests Bit 3: Allow Untrusted SSL certificates in all SSL-based tests Bit 4-32 are currently unused
OBJECT-TYPE    
  INTEGER