EICON-MIB-TRACE

File: EICON-MIB-TRACE.mib (9971 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

TimeTicks enterprises OBJECT-TYPE
DisplayString

Defined Types

ActionState  
INTEGER done(1), failed(2), in-progress(3)    

ControlOnOff  
INTEGER stop(1), start(2), invalid(3)    

CardRef  
INTEGER 1..6    

PortRef  
INTEGER 1..48    

PositiveInteger  
INTEGER 0..2147483647    

TraceControlEntry  
SEQUENCE    
  traceCntrlIndex PositiveInteger
  traceCntrlEntryStatus INTEGER
  traceCntrlEntryOwner DisplayString
  traceCntrlProtocol INTEGER
  traceCntrlEntryReclaimTime TimeTicks
  traceCntrlOnOff INTEGER
  traceCntrlActionState ActionState
  traceCntrlActionError INTEGER
  traceCntrlFileName DisplayString
  traceCntrlCardRef CardRef
  traceCntrlPortRef PortRef
  traceCntrlConnectionRef INTEGER
  traceCntrlPURef DisplayString
  traceCntrlModeRef DisplayString
  traceCntrlLURef INTEGER
  traceCntrlStationRef INTEGER
  traceCntrlLLURef DisplayString
  traceCntrlRLURef DisplayString
  traceCntrlOption INTEGER
  traceCntrlPeriod INTEGER
  traceCntrlMask INTEGER
  traceCntrlBufSize INTEGER
  traceCntrlEntrySize INTEGER
  traceCntrlBufFullAction INTEGER
  traceCntrlReadFromEntryIndex INTEGER
  traceCntrlFileType INTEGER

Defined Values

eicon 1.3.6.1.4.1.434
OBJECT IDENTIFIER    

management 1.3.6.1.4.1.434.2
OBJECT IDENTIFIER    

mibv2 1.3.6.1.4.1.434.2.2
OBJECT IDENTIFIER    

module 1.3.6.1.4.1.434.2.2.4
OBJECT IDENTIFIER    

trace 1.3.6.1.4.1.434.2.2.4.15
OBJECT IDENTIFIER    

traceFreeEntryIndex 1.3.6.1.4.1.434.2.2.4.15.1
The number indicating to the Manager the first available index for the new Entry in the traceTable. The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PositiveInteger  

traceControlTable 1.3.6.1.4.1.434.2.2.4.15.2
Trace control paramters table, one row per port. All parameters in this table have read-write access and have to be set before the trace can be started.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TraceControlEntry

traceControlEntry 1.3.6.1.4.1.434.2.2.4.15.2.1
The set of attributes for each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TraceControlEntry  

traceCntrlIndex 1.3.6.1.4.1.434.2.2.4.15.2.1.1
Index of the table
Status: mandatory Access: read-only
OBJECT-TYPE    
  PositiveInteger  

traceCntrlEntryStatus 1.3.6.1.4.1.434.2.2.4.15.2.1.2
Status of this entry in the table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), create(2), valid(3)  

traceCntrlEntryOwner 1.3.6.1.4.1.434.2.2.4.15.2.1.3
Owner of entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

traceCntrlProtocol 1.3.6.1.4.1.434.2.2.4.15.2.1.4
The Protocol to trace
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x25(1), sdlc(2), frelay(3), hdlc(4), xportiso(5), xporttgx(6), llc(7), sna(8), ppp(9), snafr(10)  

traceCntrlEntryReclaimTime 1.3.6.1.4.1.434.2.2.4.15.2.1.5
This is the amount of time the the entry is valid. a value of 0 means valid forever. default is 1 day ticks
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

traceCntrlOnOff 1.3.6.1.4.1.434.2.2.4.15.2.1.6
The start/stop parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), read(2), stop(3), invalid(4)  

traceCntrlActionState 1.3.6.1.4.1.434.2.2.4.15.2.1.7
Result of the Trace start operation. Management Station should read this value after starting the trace to find it's status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ActionState  

traceCntrlActionError 1.3.6.1.4.1.434.2.2.4.15.2.1.8
The error codes if traceStartResult has start-failed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), bad-param(2)  

traceCntrlFileName 1.3.6.1.4.1.434.2.2.4.15.2.1.9
The trace file name (full). Has to be provided by the Operator. The Agent will create the file traceFileName.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..128)  

traceCntrlCardRef 1.3.6.1.4.1.434.2.2.4.15.2.1.10
The EiconCard Reference if the traced protocol requires a card reference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  CardRef  

traceCntrlPortRef 1.3.6.1.4.1.434.2.2.4.15.2.1.11
The pointer to the port, the same as hdlcParmPortRef from the hdlcParmTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortRef  

traceCntrlConnectionRef 1.3.6.1.4.1.434.2.2.4.15.2.1.12
Connection Id reference, for Transport and Frame Relay.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlPURef 1.3.6.1.4.1.434.2.2.4.15.2.1.13
PU name for SNA PC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

traceCntrlModeRef 1.3.6.1.4.1.434.2.2.4.15.2.1.14
Mode reference name for SNA APPC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

traceCntrlLURef 1.3.6.1.4.1.434.2.2.4.15.2.1.15
LU reference for SNA PC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlStationRef 1.3.6.1.4.1.434.2.2.4.15.2.1.16
Station reference for SDLC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlLLURef 1.3.6.1.4.1.434.2.2.4.15.2.1.17
LLU reference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

traceCntrlRLURef 1.3.6.1.4.1.434.2.2.4.15.2.1.18
RLU reference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

traceCntrlOption 1.3.6.1.4.1.434.2.2.4.15.2.1.19
The option to reset the trace buffer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER append(1), clear(2)  

traceCntrlPeriod 1.3.6.1.4.1.434.2.2.4.15.2.1.20
The time period for the trace, in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlMask 1.3.6.1.4.1.434.2.2.4.15.2.1.21
The filter for the EiconCard trace function. The value has to be OR-ed using the following components, specific for each protocol. hdlc,sdlc: nothing (0), framesI (1), framesRR (2), framesRNR&REJ (4), framesFRMR&SAMB&DISC&UA(8), for hdlc only, framesFRMR&SNRM&DISC&UA&DM(8), for sdlc only, framesOther (16), for hdlc only: all frames other than indicated by values 1,2,4 ,8, framesXID&Other (16) for sdlc only: all frames other than indicated by values 1,2,4 ,8 x.25: nothing (0), packets-data (1), packets-RR&RNR (2), packets-Reset&Interrupt (4), packets-Call&Clear (8), other (16), all packets other than indicated by values 1,2,4 ,8, appc, SNA-FM, SNA-PC: nothing (0), frames-LU-LU-FMD (1), frames-LU-LU-DFC (2), frames-LU-LU-SC (4), frames-SSCP-LU-FMD (8), frames-SSCP-LU-SC (16), frames-SSCP-PU-FMD (32), frames-SSCP-PU-SC (64).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlBufSize 1.3.6.1.4.1.434.2.2.4.15.2.1.22
The size of the trace buffer on the EiconCard
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlEntrySize 1.3.6.1.4.1.434.2.2.4.15.2.1.23
The buffer entry truncation length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlBufFullAction 1.3.6.1.4.1.434.2.2.4.15.2.1.24
The buffer-full action of the EiconCard, wrap or stop and alarm. Only wrap is implemented in this first version.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wrap(1), stop(2), stopAndAlarm(3)  

traceCntrlReadFromEntryIndex 1.3.6.1.4.1.434.2.2.4.15.2.1.25
This parameter is used to indicate to the EiconCard trace function the position in the buffer when reading the trace buffer. Used with the GET for traceTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

traceCntrlFileType 1.3.6.1.4.1.434.2.2.4.15.2.1.26
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ascii(1), ebcdic(2)