EICON-MIB-ROUTER

File: EICON-MIB-ROUTER.mib (56689 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1213-MIB

Imported symbols

Counter IpAddress Gauge
TimeTicks enterprises OBJECT-TYPE
TRAP-TYPE DisplayString

Defined Types

OperState  
INTEGER other(1), disabled(2), ready(3), active(4), busy(5)    

AdminState  
INTEGER start(1), stop(2), dump(3), test(4), invalid(5)    

ActionState  
INTEGER done(1), failed(2), in-progress(3)    

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

EntryStatusV2  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4), modifyRequest(5), underModification(6)    

ConnectionStatus  
INTEGER invalid(1), listening(2), calling(3), connected(4), hangingup(5), hungup(6), pending-hungup(7)    

ControlOnOff  
INTEGER stop(1), start(2), invalid(3)    

CardRef  
INTEGER 1..6    

PortRef  
INTEGER 1..48    

PositiveInteger  
INTEGER 0..2147483647    

RtPortEntry  
SEQUENCE    
  rtPortIndex INTEGER
  rtPortNumber INTEGER
  rtPortProtocol INTEGER
  rtPortTxThroughput Gauge
  rtPortRxThroughput Gauge
  rtPortTxPackets Counter
  rtPortTxBytesLow Counter
  rtPortTxBytesHigh Counter
  rtPortRxPackets Counter
  rtPortRxBytesLow Counter
  rtPortRxBytesHigh Counter
  rtPortTxDropNoResource Counter
  rtPortRxError Counter
  rtPortCountersReset ControlOnOff

RtConnEntry  
SEQUENCE    
  rtConnIndex INTEGER
  rtConnName DisplayString
  rtConnComment DisplayString
  rtConnEntryStatus EntryStatus
  rtConnOperState OperState
  rtConnAdminStateCtr AdminState
  rtConnAutoStart INTEGER
  rtConnType INTEGER
  rtConnInactivityTimeout INTEGER
  rtConnPortNumber PortRef
  rtConnCompression INTEGER
  rtConnRetryNum INTEGER
  rtConnRetryDelay INTEGER
  rtConnPeerRouter INTEGER
  rtConnLanProtocol INTEGER
  rtConnWanProtocol INTEGER
  rtConnX25LocalDTE DisplayString
  rtConnX25RemoteDTE DisplayString
  rtConnX25CallingFacilities DisplayString
  rtConnX25ListeningFacilities DisplayString
  rtConnX25UserData DisplayString
  rtConnX25Pvc INTEGER
  rtConnFrDlci INTEGER
  rtConnSnaPuName DisplayString
  rtConnSnaLocalFqName DisplayString
  rtConnSnaRemoteFqName DisplayString
  rtConnSnaModeName DisplayString
  rtConnSnaSendPaceWindow INTEGER
  rtConnSnaReceivePaceWindow INTEGER
  rtConnSnaRuSendLow INTEGER
  rtConnSnaRuReceiveLow INTEGER
  rtConnSnaRuSendHigh INTEGER
  rtConnSnaRuReceiveHigh INTEGER
  rtConnUsage INTEGER
  rtConnFrSegmentation INTEGER
  rtConnFrXid INTEGER
  rtConnPrimOrBackName DisplayString
  rtConnRipSapUpdateType INTEGER
  rtConnSAPDelay INTEGER
  rtConnRIPDelay INTEGER

RtIPMappingEntry  
SEQUENCE    
  rtIPMapIndex INTEGER
  rtIPMapConnIndex INTEGER
  rtIPMapEntryStatus EntryStatus
  rtIPMapNextHop IpAddress
  rtIPMapBroadcast INTEGER
  rtIPMapIPMask IpAddress
  rtIPMapVJCompress INTEGER

RtCircuitEntry  
SEQUENCE    
  rtCircuitConnIndex INTEGER
  rtCircuitStatus INTEGER
  rtCircuitTimeUp TimeTicks
  rtCircuitErrCode INTEGER
  rtCircuitSessionType INTEGER
  rtCircuitConnLSN INTEGER
  rtCircuitDataLSN INTEGER
  rtCircuitCmSelector INTEGER
  rtCircuitCompression INTEGER
  rtCircuitCompAlgorithm INTEGER
  rtCircuitBeforeComp Gauge
  rtCircuitAfterComp Gauge
  rtCircuitTxErr INTEGER
  rtCircuitBoundLANProtocol INTEGER
  rtCircuitRemoteRouter DisplayString
  rtCircuitCountersReset ControlOnOff
  rtCircuitWanProtocol INTEGER
  rtCircuitX25LocalDTE DisplayString
  rtCircuitX25RemoteDTE DisplayString
  rtCircuitX25CallingFacilities DisplayString
  rtCircuitX25ListeningFacilities DisplayString
  rtCircuitX25UserData DisplayString
  rtCircuitX25Cause INTEGER
  rtCircuitX25Diag INTEGER
  rtCircuitX25Pvc INTEGER
  rtCircuitFrDlci INTEGER
  rtCircuitFrSegmentation INTEGER
  rtCircuitFrXIDNegot INTEGER
  rtCircuitFrXIDPacketSize INTEGER
  rtCircuitFrCongestion INTEGER

RtCircuitIPEntry  
SEQUENCE    
  rtCircuitIPConnIndex INTEGER
  rtCircuitIPRemoteAddress IpAddress
  rtCircuitIPLocalAddress IpAddress
  rtCircuitIPTxPackets Counter
  rtCircuitIPTxBytes Counter
  rtCircuitIPRxPackets Counter
  rtCircuitIPRxBytes Counter

RtCircuitIPXEntry  
SEQUENCE    
  rtCircuitIPXConnIndex INTEGER
  rtCircuitIPXRemoteNode OCTET STRING
  rtCircuitIPXRemoteNetwork OCTET STRING
  rtCircuitIPXLocalNode OCTET STRING
  rtCircuitIPXLocalNetwork OCTET STRING
  rtCircuitIPXTxPackets Counter
  rtCircuitIPXTxBytes Counter
  rtCircuitIPXRxPackets Counter
  rtCircuitIPXRxBytes Counter

RtCircuitATEntry  
SEQUENCE    
  rtCircuitATConnIndex INTEGER
  rtCircuitATRemoteNet OCTET STRING
  rtCircuitATRemoteNode OCTET STRING
  rtCircuitATLocalNet OCTET STRING
  rtCircuitATLocalNode OCTET STRING
  rtCircuitATTxPackets Counter
  rtCircuitATTxBytes Counter
  rtCircuitATRxPackets Counter
  rtCircuitATRxBytes Counter

RtIPFilterEntry  
SEQUENCE    
  rtIPFilterConnIndex INTEGER
  rtIPFilterIndex INTEGER
  rtIPFilterEntryStatus EntryStatusV2
  rtIPFilterOperState OperState
  rtIPFilterAdminStateCtr AdminState
  rtIPFilterPosition INTEGER
  rtIPFilterAction INTEGER
  rtIPFilterDirection INTEGER
  rtIPFilterPortType INTEGER
  rtIPFilterLowSrcPort INTEGER
  rtIPFilterHighSrcPort INTEGER
  rtIPFilterLowDestPort INTEGER
  rtIPFilterHighDestPort INTEGER
  rtIPFilterIPAddressSrc IpAddress
  rtIPFilterIPMaskSrc IpAddress
  rtIPFilterIPAddressDest IpAddress
  rtIPFilterIPMaskDest IpAddress
  rtIPFilterStatsIn Counter
  rtIPFilterStatsOut Counter

Defined Values

eicon 1.3.6.1.4.1.434
OBJECT IDENTIFIER    

management 1.3.6.1.4.1.434.2
OBJECT IDENTIFIER    

mibv2 1.3.6.1.4.1.434.2.2
OBJECT IDENTIFIER    

module 1.3.6.1.4.1.434.2.2.4
OBJECT IDENTIFIER    

router 1.3.6.1.4.1.434.2.2.8
OBJECT IDENTIFIER    

rtName 1.3.6.1.4.1.434.2.2.8.1
The name advertised by the router agent using SAP.
OBJECT-TYPE    
  DisplayString Size(1..48)  

rtProductName 1.3.6.1.4.1.434.2.2.8.2
The Product name ie. Router for Netware.
OBJECT-TYPE    
  DisplayString Size(1..48)  

rtReleaseVersion 1.3.6.1.4.1.434.2.2.8.3
Ex.: Ver. 3 Rel. 2.
OBJECT-TYPE    
  INTEGER  

rtReleaseDate 1.3.6.1.4.1.434.2.2.8.4
Format: 1993/03/25.
OBJECT-TYPE    
  INTEGER  

rtOperState 1.3.6.1.4.1.434.2.2.8.5
The operational state of the router.
OBJECT-TYPE    
  OperState  

rtAdminStateCtr 1.3.6.1.4.1.434.2.2.8.6
The administrative state of the router. Management station will change this value to start or stop the router.
OBJECT-TYPE    
  AdminState  

rtType 1.3.6.1.4.1.434.2.2.8.7
Type of router.
OBJECT-TYPE    
  INTEGER typeNetWareRouter(1), typeOS2Router(2), typeUnixRouter(3), typeNTRouter(4), typeSynOpticsRouter(5), typeMadrasRouter(6)  

rtTimeUp 1.3.6.1.4.1.434.2.2.8.8
The time elapsed since the router was started.
OBJECT-TYPE    
  TimeTicks  

rtNumberOfPorts 1.3.6.1.4.1.434.2.2.8.9
The number of Eicon ports currently used by the router.
OBJECT-TYPE    
  INTEGER  

rtMaxCircuits 1.3.6.1.4.1.434.2.2.8.10
The maximum number of connections that can be configured for this router.
OBJECT-TYPE    
  INTEGER  

rtAvailableCircuits 1.3.6.1.4.1.434.2.2.8.11
The number of connections still available for this router.
OBJECT-TYPE    
  Gauge  

rtAvailableLANMapping 1.3.6.1.4.1.434.2.2.8.12
The available number of LAN protocol mappings for all connections.
OBJECT-TYPE    
  Gauge  

rtMaxLANMapping 1.3.6.1.4.1.434.2.2.8.13
The maximum number of LAN protocol mappings for all connections.
OBJECT-TYPE    
  INTEGER  

rtGlobalTxPackets 1.3.6.1.4.1.434.2.2.8.14
The number of packets transmitted by the router on all ports
OBJECT-TYPE    
  Counter  

rtGlobalTxBytesLow 1.3.6.1.4.1.434.2.2.8.15
The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalTxBytesHigh 1.3.6.1.4.1.434.2.2.8.16
The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalRxPackets 1.3.6.1.4.1.434.2.2.8.17
The number of packets received by the router on all ports
OBJECT-TYPE    
  Counter  

rtGlobalRxBytesLow 1.3.6.1.4.1.434.2.2.8.18
The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalRxBytesHigh 1.3.6.1.4.1.434.2.2.8.19
The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropNoRoute 1.3.6.1.4.1.434.2.2.8.20
The number of transmit packets dropped on all ports because no route was found.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropNoResource 1.3.6.1.4.1.434.2.2.8.21
The number of transmit packets dropped on all ports because resources were exhausted.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.22
The number of transmit packets dropped because the WAN protocol is not supported.
OBJECT-TYPE    
  Counter  

rtGlobalRxDropNoResource 1.3.6.1.4.1.434.2.2.8.23
The number of received packets dropped on all ports because resources were exhausted.
OBJECT-TYPE    
  Counter  

rtGlobalRxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.24
The number of received packets dropped because a LAN protocol is not supported.
OBJECT-TYPE    
  Counter  

rtGlobalRxError 1.3.6.1.4.1.434.2.2.8.25
The number of errors encountered when receiving from the EiconCard(s).
OBJECT-TYPE    
  Counter  

rtGlobalCountersReset 1.3.6.1.4.1.434.2.2.8.26
This variable is used to reset all router global counters.
OBJECT-TYPE    
  ControlOnOff  

rtTraceCtrl 1.3.6.1.4.1.434.2.2.8.27
This object is used to start or stop the trace with the parameters specified by the following trace objects.
OBJECT-TYPE    
  ControlOnOff  

rtTraceFileName 1.3.6.1.4.1.434.2.2.8.28
The (fully qualified) file name for the file which will hold the trace.
OBJECT-TYPE    
  DisplayString Size(1..48)  

rtTraceInterfaceType 1.3.6.1.4.1.434.2.2.8.29
The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).
OBJECT-TYPE    
  INTEGER  

rtPortTable 1.3.6.1.4.1.434.2.2.8.30
The router port table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtPortEntry

rtPortEntry 1.3.6.1.4.1.434.2.2.8.30.1
The router information for one port.
OBJECT-TYPE    
  RtPortEntry  

rtPortIndex 1.3.6.1.4.1.434.2.2.8.30.1.1
Index of this table
OBJECT-TYPE    
  INTEGER 1..48  

rtPortNumber 1.3.6.1.4.1.434.2.2.8.30.1.2
EiconCard port number.
OBJECT-TYPE    
  INTEGER 1..48  

rtPortProtocol 1.3.6.1.4.1.434.2.2.8.30.1.3
Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).
OBJECT-TYPE    
  INTEGER  

rtPortTxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.4
Throughput calculated for the transmision.
OBJECT-TYPE    
  Gauge  

rtPortRxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.5
Throughput calculated for the reception.
OBJECT-TYPE    
  Gauge  

rtPortTxPackets 1.3.6.1.4.1.434.2.2.8.30.1.6
Number of packets transmitted for this port.
OBJECT-TYPE    
  Counter  

rtPortTxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.7
Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortTxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.8
Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortRxPackets 1.3.6.1.4.1.434.2.2.8.30.1.9
Number of packets received for this port.
OBJECT-TYPE    
  Counter  

rtPortRxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.10
Number of bytes received for this port; the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortRxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.11
Number of bytes received for this port; the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortTxDropNoResource 1.3.6.1.4.1.434.2.2.8.30.1.12
Number of transmit packets dropped because no resources were available.
OBJECT-TYPE    
  Counter  

rtPortRxError 1.3.6.1.4.1.434.2.2.8.30.1.13
Number of packets received with an EiconCard error.
OBJECT-TYPE    
  Counter  

rtPortCountersReset 1.3.6.1.4.1.434.2.2.8.30.1.14
This object is used to reset the values of all counters for this port.
OBJECT-TYPE    
  ControlOnOff  

rtConnFreeIndex 1.3.6.1.4.1.434.2.2.8.31
The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtConnEntry and change rtConnEntryStatus to valid (1) or abandon and change rtConnEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
OBJECT-TYPE    
  INTEGER  

rtConnTable 1.3.6.1.4.1.434.2.2.8.32
The table of WAN connections to peer routers.
OBJECT-TYPE    
  SEQUENCE OF  
    RtConnEntry

rtConnEntry 1.3.6.1.4.1.434.2.2.8.32.1
The routing information for one destination.
OBJECT-TYPE    
  RtConnEntry  

rtConnIndex 1.3.6.1.4.1.434.2.2.8.32.1.1
The index used to identify the connection entry.
OBJECT-TYPE    
  INTEGER  

rtConnName 1.3.6.1.4.1.434.2.2.8.32.1.2
The name used to identify the connection entry.
OBJECT-TYPE    
  DisplayString Size(1..16)  

rtConnComment 1.3.6.1.4.1.434.2.2.8.32.1.3
Optional comment about the connection entry.
OBJECT-TYPE    
  DisplayString Size(0..80)  

rtConnEntryStatus 1.3.6.1.4.1.434.2.2.8.32.1.4
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatus  

rtConnOperState 1.3.6.1.4.1.434.2.2.8.32.1.5
The object describing the state of the connection.
OBJECT-TYPE    
  OperState  

rtConnAdminStateCtr 1.3.6.1.4.1.434.2.2.8.32.1.6
The object used to start and stop the circuit for this connection entry.
OBJECT-TYPE    
  AdminState  

rtConnAutoStart 1.3.6.1.4.1.434.2.2.8.32.1.7
The object used to indicate if the connnection should be activated every time the router starts. Yes is the default.
OBJECT-TYPE    
  INTEGER startYes(1), startNo(2)  

rtConnType 1.3.6.1.4.1.434.2.2.8.32.1.8
The type of connection.
OBJECT-TYPE    
  INTEGER typeIn(1), typeOut(2), typeTwoWay(3)  

rtConnInactivityTimeout 1.3.6.1.4.1.434.2.2.8.32.1.9
The connection inactivity timeout in seconds.
OBJECT-TYPE    
  INTEGER  

rtConnPortNumber 1.3.6.1.4.1.434.2.2.8.32.1.10
The EiconCard port number for this connection.
OBJECT-TYPE    
  PortRef  

rtConnCompression 1.3.6.1.4.1.434.2.2.8.32.1.11
The object indicating the type of compression to use, if any.
OBJECT-TYPE    
  INTEGER comprNo(1), comprStac(2), comprOther(3)  

rtConnRetryNum 1.3.6.1.4.1.434.2.2.8.32.1.12
The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.
OBJECT-TYPE    
  INTEGER  

rtConnRetryDelay 1.3.6.1.4.1.434.2.2.8.32.1.13
The connection retry delay in seconds.
OBJECT-TYPE    
  INTEGER  

rtConnPeerRouter 1.3.6.1.4.1.434.2.2.8.32.1.14
The type of the peer router for this connection.
OBJECT-TYPE    
  INTEGER peerNetWareV2(1), peerNetWareNLM(2), peerUniversal(3), peerCISCO(4)  

rtConnLanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.15
The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.
OBJECT-TYPE    
  INTEGER  

rtConnWanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.16
The object indicates which WAN protocol will be used for this connection.
OBJECT-TYPE    
  INTEGER connX25Svc(1), connX25Pvc(2), connFr(3), connPpp(4), connSna(5), connHdlc(6)  

rtConnX25LocalDTE 1.3.6.1.4.1.434.2.2.8.32.1.17
The X25 Local DTE Address configured for this connection.
OBJECT-TYPE    
  DisplayString Size(1..17)  

rtConnX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.32.1.18
The X25 Remote DTE Address configured for this connection.
OBJECT-TYPE    
  DisplayString Size(1..17)  

rtConnX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.32.1.19
The X25 Calling Facilities configured for this connection.
OBJECT-TYPE    
  DisplayString Size(1..218)  

rtConnX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.32.1.20
The X25 Listening Facilities configured for this connection.
OBJECT-TYPE    
  DisplayString Size(1..218)  

rtConnX25UserData 1.3.6.1.4.1.434.2.2.8.32.1.21
The X25 User Data configured for this connection.
OBJECT-TYPE    
  DisplayString Size(1..256)  

rtConnX25Pvc 1.3.6.1.4.1.434.2.2.8.32.1.22
The X25 PVC configured for this connection.
OBJECT-TYPE    
  INTEGER  

rtConnFrDlci 1.3.6.1.4.1.434.2.2.8.32.1.23
The Frame Relay DLCI configured for this connection.
OBJECT-TYPE    
  INTEGER  

rtConnSnaPuName 1.3.6.1.4.1.434.2.2.8.32.1.24
Physical Unit Name.
OBJECT-TYPE    
  DisplayString Size(1..8)  

rtConnSnaLocalFqName 1.3.6.1.4.1.434.2.2.8.32.1.25
Local fully qualified name.
OBJECT-TYPE    
  DisplayString Size(1..18)  

rtConnSnaRemoteFqName 1.3.6.1.4.1.434.2.2.8.32.1.26
Remote fully qualified name.
OBJECT-TYPE    
  DisplayString Size(1..18)  

rtConnSnaModeName 1.3.6.1.4.1.434.2.2.8.32.1.27
Mode name.
OBJECT-TYPE    
  DisplayString Size(1..8)  

rtConnSnaSendPaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.28
Send Pace Window.
OBJECT-TYPE    
  INTEGER 1..255  

rtConnSnaReceivePaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.29
Receive Pace Window.
OBJECT-TYPE    
  INTEGER 1..255  

rtConnSnaRuSendLow 1.3.6.1.4.1.434.2.2.8.32.1.30
Request Unit send low.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuReceiveLow 1.3.6.1.4.1.434.2.2.8.32.1.31
Request Unit receive low.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuSendHigh 1.3.6.1.4.1.434.2.2.8.32.1.32
Request Unit send high.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuReceiveHigh 1.3.6.1.4.1.434.2.2.8.32.1.33
Request unit receive high.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnUsage 1.3.6.1.4.1.434.2.2.8.32.1.34
The connection can be defined as a primary or a backup connection for a primary.
OBJECT-TYPE    
  INTEGER uSagePrimary(1), uSageBackup(2)  

rtConnFrSegmentation 1.3.6.1.4.1.434.2.2.8.32.1.35
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtConnFrXid 1.3.6.1.4.1.434.2.2.8.32.1.36
The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtConnPrimOrBackName 1.3.6.1.4.1.434.2.2.8.32.1.37
This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.
OBJECT-TYPE    
  DisplayString Size(1..16)  

rtConnRipSapUpdateType 1.3.6.1.4.1.434.2.2.8.32.1.38
The update type of RIP / SAP.
OBJECT-TYPE    
  INTEGER none(1), onchange(2), periodic(3)  

rtConnSAPDelay 1.3.6.1.4.1.434.2.2.8.32.1.39
The delay in minutes between the SAP updates on this WAN connection.
OBJECT-TYPE    
  INTEGER  

rtConnRIPDelay 1.3.6.1.4.1.434.2.2.8.32.1.40
The delay in minutes between the RIP updates on this WAN connection.
OBJECT-TYPE    
  INTEGER  

rtIPMapFreeIndex 1.3.6.1.4.1.434.2.2.8.33
The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtIPMappingEntry and change rtIPMapEntryStatus to valid (1) or abandon and change rtIPMapEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
OBJECT-TYPE    
  INTEGER  

rtIPMappingTable 1.3.6.1.4.1.434.2.2.8.34
The IP mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtIPMappingEntry

rtIPMappingEntry 1.3.6.1.4.1.434.2.2.8.34.1
One mapping information entry.
OBJECT-TYPE    
  RtIPMappingEntry  

rtIPMapIndex 1.3.6.1.4.1.434.2.2.8.34.1.1
The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.
OBJECT-TYPE    
  INTEGER  

rtIPMapConnIndex 1.3.6.1.4.1.434.2.2.8.34.1.2
Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtIPMapEntryStatus 1.3.6.1.4.1.434.2.2.8.34.1.3
The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatus  

rtIPMapNextHop 1.3.6.1.4.1.434.2.2.8.34.1.4
The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.
OBJECT-TYPE    
  IpAddress  

rtIPMapBroadcast 1.3.6.1.4.1.434.2.2.8.34.1.5
The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value.
OBJECT-TYPE    
  INTEGER broadNo(1), broadYes(2)  

rtIPMapIPMask 1.3.6.1.4.1.434.2.2.8.34.1.6
The IP address mask to be used for this mapping.
OBJECT-TYPE    
  IpAddress  

rtIPMapVJCompress 1.3.6.1.4.1.434.2.2.8.34.1.7
The object which indicates if the VanJacobsen compression is to be used for this mapping.
OBJECT-TYPE    
  INTEGER vjNo(1), vjYes(2)  

rtCircuitTable 1.3.6.1.4.1.434.2.2.8.35
The router circuit table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitEntry

rtCircuitEntry 1.3.6.1.4.1.434.2.2.8.35.1
The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.
OBJECT-TYPE    
  RtCircuitEntry  

rtCircuitConnIndex 1.3.6.1.4.1.434.2.2.8.35.1.1
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitStatus 1.3.6.1.4.1.434.2.2.8.35.1.2
Indicates the circuit status.
OBJECT-TYPE    
  INTEGER listening(1), calling(2), connected(3), hangingup(4), hungup(5), aborted(6), idle(7), portdisconnected(8), notbound(9), unknown(10)  

rtCircuitTimeUp 1.3.6.1.4.1.434.2.2.8.35.1.3
Time elapsed since this circuit was started.
OBJECT-TYPE    
  TimeTicks  

rtCircuitErrCode 1.3.6.1.4.1.434.2.2.8.35.1.4
Last error code returned from the EiconCard.
OBJECT-TYPE    
  INTEGER  

rtCircuitSessionType 1.3.6.1.4.1.434.2.2.8.35.1.5
Type of circuit session.
OBJECT-TYPE    
  INTEGER  

rtCircuitConnLSN 1.3.6.1.4.1.434.2.2.8.35.1.6
Connection Manager LSN used for management.
OBJECT-TYPE    
  INTEGER  

rtCircuitDataLSN 1.3.6.1.4.1.434.2.2.8.35.1.7
Connection Manager LSN used for data.
OBJECT-TYPE    
  INTEGER  

rtCircuitCmSelector 1.3.6.1.4.1.434.2.2.8.35.1.8
Handle returned by Connection Manager for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitCompression 1.3.6.1.4.1.434.2.2.8.35.1.9
Compression on/off, after negotiation.
OBJECT-TYPE    
  INTEGER  

rtCircuitCompAlgorithm 1.3.6.1.4.1.434.2.2.8.35.1.10
Compression type, after negotiation.
OBJECT-TYPE    
  INTEGER  

rtCircuitBeforeComp 1.3.6.1.4.1.434.2.2.8.35.1.11
Number of bytes sent before compression.
OBJECT-TYPE    
  Gauge  

rtCircuitAfterComp 1.3.6.1.4.1.434.2.2.8.35.1.12
Number of bytes sent after compression.
OBJECT-TYPE    
  Gauge  

rtCircuitTxErr 1.3.6.1.4.1.434.2.2.8.35.1.13
The number of Transmit errors
OBJECT-TYPE    
  INTEGER  

rtCircuitBoundLANProtocol 1.3.6.1.4.1.434.2.2.8.35.1.14
The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.
OBJECT-TYPE    
  INTEGER  

rtCircuitRemoteRouter 1.3.6.1.4.1.434.2.2.8.35.1.15
The name of the remote router discovered by the local router.
OBJECT-TYPE    
  DisplayString Size(1..48)  

rtCircuitCountersReset 1.3.6.1.4.1.434.2.2.8.35.1.16
The object is used to reset all counters for this circuit.
OBJECT-TYPE    
  ControlOnOff  

rtCircuitWanProtocol 1.3.6.1.4.1.434.2.2.8.35.1.17
The object indicates which WAN protocol will be used for this connection.
OBJECT-TYPE    
  INTEGER connX25Svc(1), connX25Pvc(2), connFr(3), connPpp(4), connSna(5), connHdlc(6)  

rtCircuitX25LocalDTE 1.3.6.1.4.1.434.2.2.8.35.1.18
The X25 Local DTE Address for this circuit
OBJECT-TYPE    
  DisplayString Size(1..17)  

rtCircuitX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.35.1.19
The X25 Remote DTE Address for this circuit
OBJECT-TYPE    
  DisplayString Size(1..17)  

rtCircuitX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.35.1.20
The X25 Calling Facilities for this circuit
OBJECT-TYPE    
  DisplayString Size(1..218)  

rtCircuitX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.35.1.21
The X25 Listening Facilities for this circuit
OBJECT-TYPE    
  DisplayString Size(1..218)  

rtCircuitX25UserData 1.3.6.1.4.1.434.2.2.8.35.1.22
The X25 User Data for this circuit
OBJECT-TYPE    
  DisplayString Size(1..256)  

rtCircuitX25Cause 1.3.6.1.4.1.434.2.2.8.35.1.23
The Cause of Circuit connection failure
OBJECT-TYPE    
  INTEGER  

rtCircuitX25Diag 1.3.6.1.4.1.434.2.2.8.35.1.24
Diagnostics code of the Circuit connection failure.
OBJECT-TYPE    
  INTEGER  

rtCircuitX25Pvc 1.3.6.1.4.1.434.2.2.8.35.1.25
The X25 PVC for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrDlci 1.3.6.1.4.1.434.2.2.8.35.1.26
The Frame Relay DLCI for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrSegmentation 1.3.6.1.4.1.434.2.2.8.35.1.27
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtCircuitFrXIDNegot 1.3.6.1.4.1.434.2.2.8.35.1.28
The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtCircuitFrXIDPacketSize 1.3.6.1.4.1.434.2.2.8.35.1.29
The size of the Frame Relay XID packet.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrCongestion 1.3.6.1.4.1.434.2.2.8.35.1.30
The object indicates if Frame Relay can be congested on this circuit.
OBJECT-TYPE    
  INTEGER noCongestion(1), congested(2)  

rtCircuitIPTable 1.3.6.1.4.1.434.2.2.8.36
The router IP info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitIPEntry

rtCircuitIPEntry 1.3.6.1.4.1.434.2.2.8.36.1
The circuit information specific to IP.
OBJECT-TYPE    
  RtCircuitIPEntry  

rtCircuitIPConnIndex 1.3.6.1.4.1.434.2.2.8.36.1.1
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitIPRemoteAddress 1.3.6.1.4.1.434.2.2.8.36.1.2
Remote router IP address.
OBJECT-TYPE    
  IpAddress  

rtCircuitIPLocalAddress 1.3.6.1.4.1.434.2.2.8.36.1.3
Local router IP address.
OBJECT-TYPE    
  IpAddress  

rtCircuitIPTxPackets 1.3.6.1.4.1.434.2.2.8.36.1.4
Number of transmit packets which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPTxBytes 1.3.6.1.4.1.434.2.2.8.36.1.5
Number of transmit bytes which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPRxPackets 1.3.6.1.4.1.434.2.2.8.36.1.6
Number of received packets which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPRxBytes 1.3.6.1.4.1.434.2.2.8.36.1.7
Number of received bytes which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPXTable 1.3.6.1.4.1.434.2.2.8.37
The router IPX info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitIPXEntry

rtCircuitIPXEntry 1.3.6.1.4.1.434.2.2.8.37.1
The circuit information.
OBJECT-TYPE    
  RtCircuitIPXEntry  

rtCircuitIPXConnIndex 1.3.6.1.4.1.434.2.2.8.37.1.1
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitIPXRemoteNode 1.3.6.1.4.1.434.2.2.8.37.1.2
Remote router node address.
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

rtCircuitIPXRemoteNetwork 1.3.6.1.4.1.434.2.2.8.37.1.3
Remote router network address.
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

rtCircuitIPXLocalNode 1.3.6.1.4.1.434.2.2.8.37.1.4
Local router node address.
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

rtCircuitIPXLocalNetwork 1.3.6.1.4.1.434.2.2.8.37.1.5
Local router network address.
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

rtCircuitIPXTxPackets 1.3.6.1.4.1.434.2.2.8.37.1.6
Number of transmit packets which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXTxBytes 1.3.6.1.4.1.434.2.2.8.37.1.7
Number of transmit bytes which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXRxPackets 1.3.6.1.4.1.434.2.2.8.37.1.8
Number of received packets which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXRxBytes 1.3.6.1.4.1.434.2.2.8.37.1.9
Number of received bytes which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitATTable 1.3.6.1.4.1.434.2.2.8.38
The router AT info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitATEntry

rtCircuitATEntry 1.3.6.1.4.1.434.2.2.8.38.1
The AT circuit information.
OBJECT-TYPE    
  RtCircuitATEntry  

rtCircuitATConnIndex 1.3.6.1.4.1.434.2.2.8.38.1.1
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitATRemoteNet 1.3.6.1.4.1.434.2.2.8.38.1.2
Remote router network address.
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

rtCircuitATRemoteNode 1.3.6.1.4.1.434.2.2.8.38.1.3
Remote router node address.
OBJECT-TYPE    
  OCTET STRING Size(1..1)  

rtCircuitATLocalNet 1.3.6.1.4.1.434.2.2.8.38.1.4
Local router network address.
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

rtCircuitATLocalNode 1.3.6.1.4.1.434.2.2.8.38.1.5
Local router node address.
OBJECT-TYPE    
  OCTET STRING Size(1..1)  

rtCircuitATTxPackets 1.3.6.1.4.1.434.2.2.8.38.1.6
Number of transmit packets which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATTxBytes 1.3.6.1.4.1.434.2.2.8.38.1.7
Number of transmit bytes which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATRxPackets 1.3.6.1.4.1.434.2.2.8.38.1.8
Number of received packets which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATRxBytes 1.3.6.1.4.1.434.2.2.8.38.1.9
Number of received bytes which carry AT.
OBJECT-TYPE    
  Counter  

rtMaxIPFilter 1.3.6.1.4.1.434.2.2.8.39
The maximum number of IP Filters that can be configured for this router.
OBJECT-TYPE    
  INTEGER  

rtAvailableIPFilter 1.3.6.1.4.1.434.2.2.8.40
The number of IP Filters still available for this router.
OBJECT-TYPE    
  Gauge  

rtIPFilterDropStatsIn 1.3.6.1.4.1.434.2.2.8.41
Total number of incoming packets dropped.
OBJECT-TYPE    
  Counter  

rtIPFilterDropStatsOut 1.3.6.1.4.1.434.2.2.8.42
Total number of outgoing packets dropped.
OBJECT-TYPE    
  Counter  

rtIPFilterForwardStatsIn 1.3.6.1.4.1.434.2.2.8.43
Total number of incoming packets forwarded.
OBJECT-TYPE    
  Counter  

rtIPFilterForwardStatsOut 1.3.6.1.4.1.434.2.2.8.44
Total number of outgoing packets forwarded.
OBJECT-TYPE    
  Counter  

rtIPFilterFreeIndex 1.3.6.1.4.1.434.2.2.8.45
This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value for any connection.
OBJECT-TYPE    
  INTEGER  

rtIPFilterTable 1.3.6.1.4.1.434.2.2.8.46
The IP Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtIPFilterEntry

rtIPFilterEntry 1.3.6.1.4.1.434.2.2.8.46.1
Information on an IP Filter.
OBJECT-TYPE    
  RtIPFilterEntry  

rtIPFilterConnIndex 1.3.6.1.4.1.434.2.2.8.46.1.1
Same as rtConnIndex.
OBJECT-TYPE    
  INTEGER  

rtIPFilterIndex 1.3.6.1.4.1.434.2.2.8.46.1.2
Index of IP Filter for the connection.
OBJECT-TYPE    
  INTEGER  

rtIPFilterEntryStatus 1.3.6.1.4.1.434.2.2.8.46.1.3
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatusV2  

rtIPFilterOperState 1.3.6.1.4.1.434.2.2.8.46.1.4
The object indicates the state of the IP Filter.
OBJECT-TYPE    
  OperState  

rtIPFilterAdminStateCtr 1.3.6.1.4.1.434.2.2.8.46.1.5
The object used to start and stop the IP Filter.
OBJECT-TYPE    
  AdminState  

rtIPFilterPosition 1.3.6.1.4.1.434.2.2.8.46.1.6
This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manager should use a valid rtIPFilterIndex to set this variable. The new filter will be inserted after the corresponding filter. To insert the filter at the beginning for the connection, set the variable to 0.
OBJECT-TYPE    
  INTEGER  

rtIPFilterAction 1.3.6.1.4.1.434.2.2.8.46.1.7
Drop (1) or Forward (2) the information.
OBJECT-TYPE    
  INTEGER drop(1), forward(2)  

rtIPFilterDirection 1.3.6.1.4.1.434.2.2.8.46.1.8
Specifies if the filter is applied to outgoing, incoming or both ways packets.
OBJECT-TYPE    
  INTEGER in(1), out(2), all(3)  

rtIPFilterPortType 1.3.6.1.4.1.434.2.2.8.46.1.9
Protocol type.
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), all(3)  

rtIPFilterLowSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.10
Low Source Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterHighSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.11
High Source Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterLowDestPort 1.3.6.1.4.1.434.2.2.8.46.1.12
Low Destination Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterHighDestPort 1.3.6.1.4.1.434.2.2.8.46.1.13
High Destination Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterIPAddressSrc 1.3.6.1.4.1.434.2.2.8.46.1.14
Source IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPMaskSrc 1.3.6.1.4.1.434.2.2.8.46.1.15
Mask of the source IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPAddressDest 1.3.6.1.4.1.434.2.2.8.46.1.16
Destination IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPMaskDest 1.3.6.1.4.1.434.2.2.8.46.1.17
Mask of the destination IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterStatsIn 1.3.6.1.4.1.434.2.2.8.46.1.18
The number of incoming packets that match the filter.
OBJECT-TYPE    
  Counter  

rtIPFilterStatsOut 1.3.6.1.4.1.434.2.2.8.46.1.19
The number of outgoing packets that match the filter.
OBJECT-TYPE    
  Counter  

rtActionState 1.3.6.1.4.1.434.2.2.8.47
The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll that variable after initiating an action on the router. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. In this case the variable 'rtActionError' indicates the error code.
OBJECT-TYPE    
  ActionState  

rtActionError 1.3.6.1.4.1.434.2.2.8.48
The error code after the unsuccessful operation.
OBJECT-TYPE    
  INTEGER no-error(0), err-ALREADY-STARTED(1), err-NOT-STARTED(2), err-STACK-NOT-BOUND(3), err-SHUTDOWN-FAILURE(4), err-General(99)