EF-6000-MIB
File:
EF-6000-MIB.mib (52161 bytes)
Imported modules
Imported symbols
Defined Types
Ef6000SysOperStatus |
|
INTEGER |
operational(1), redundant-failure(2), minor-failure(3), major-failure(4), not-operational(5) |
|
|
Ef6000FruCode |
|
INTEGER |
fru-bkplane(1), fru-ctp(2), fru-sbar(3), fru-fan2(4), fru-fan(5), fru-power(6), fru-reserved(7), fru-glsl(8), fru-gsml(9), fru-gxxl(10), fru-gsf1(11), fru-gsf2(12), fru-glsr(13), fru-gsmr(14), fru-gxxr(15), fru-fint1(16) |
|
|
Ef6000PortPhyState |
|
INTEGER |
psNotInstalled(1), psAvailable(2), psBlocked(3), psUnavailable(4), psLinkFailure(5), psLinkFailLOL(6), psIntDiags(7), psExtLoop(8), psPortFail(9), psSR(10), psLR(11), psInaccessible(12), psInactive(13) |
|
|
Ef6000FruEntry |
|
SEQUENCE |
|
|
|
|
ef6000FruCode |
Ef6000FruCode |
|
|
ef6000FruPosition |
Ef6000FruPosition |
|
|
ef6000FruStatus |
INTEGER |
|
|
ef6000FruPartNumber |
DisplayString |
|
|
ef6000FruSerialNumber |
DisplayString |
|
|
ef6000FruPowerOnHours |
Counter |
|
|
ef6000FruTestDate |
DisplayString |
|
Ef6000PortEntry |
|
SEQUENCE |
|
|
|
|
ef6000PortIndex |
Ef6000PortIndex |
|
|
ef6000PortPhyState |
Ef6000PortPhyState |
|
|
ef6000PortOpStatus |
INTEGER |
|
|
ef6000PortAdmStatus |
INTEGER |
|
|
ef6000PortConnector |
INTEGER |
|
|
ef6000PortDistance |
INTEGER |
|
|
ef6000PortType |
INTEGER |
|
|
ef6000PortMedia |
INTEGER |
|
|
ef6000PortSpeedCap |
INTEGER |
|
|
ef6000PortConfigSpeed |
INTEGER |
|
|
ef6000PortSpeed |
INTEGER |
|
|
ef6000PortTxWords32 |
Counter |
|
|
ef6000PortRxWords32 |
Counter |
|
|
ef6000PortTxFrames32 |
Counter |
|
|
ef6000PortRxFrames32 |
Counter |
|
|
ef6000PortTxThroughput |
Counter |
|
|
ef6000PortRxThroughput |
Counter |
|
|
ef6000PortTxC2Words32 |
Counter |
|
|
ef6000PortRxC2Words32 |
Counter |
|
|
ef6000PortTxC2Frames32 |
Counter |
|
|
ef6000PortRxC2Frames32 |
Counter |
|
|
ef6000PortTxC2Octets32 |
Counter |
|
|
ef6000PortRxC2Octets32 |
Counter |
|
|
ef6000PortTxC3Words32 |
Counter |
|
|
ef6000PortRxC3Words32 |
Counter |
|
|
ef6000PortTxC3Frames32 |
Counter |
|
|
ef6000PortRxC3Frames32 |
Counter |
|
|
ef6000PortTxC3Octets32 |
Counter |
|
|
ef6000PortRxC3Octets32 |
Counter |
|
|
ef6000PortC3Discards32 |
Counter |
|
|
ef6000PortDiscardFrames |
Counter |
|
|
ef6000PortTxLinkResets |
Counter |
|
|
ef6000PortRxLinkResets |
Counter |
|
|
ef6000PortTxOLSs |
Counter |
|
|
ef6000PortRxOLSs |
Counter |
|
|
ef6000PortSyncLosses |
Counter |
|
|
ef6000PortSigLosses |
Counter |
|
|
ef6000PortProtocolErrors |
Counter |
|
|
ef6000PortInvalidTxWords |
Counter |
|
|
ef6000PortLinkFailures |
Counter |
|
|
ef6000PortCrcs |
Counter |
|
|
ef6000PortTruncs |
Counter |
|
|
ef6000PortTxWords64 |
OCTET STRING |
|
|
ef6000PortRxWords64 |
OCTET STRING |
|
|
ef6000PortTxFrames64 |
OCTET STRING |
|
|
ef6000PortRxFrames64 |
OCTET STRING |
|
|
ef6000PortTxC2Words64 |
OCTET STRING |
|
|
ef6000PortRxC2Words64 |
OCTET STRING |
|
|
ef6000PortTxC2Frames64 |
OCTET STRING |
|
|
ef6000PortRxC2Frames64 |
OCTET STRING |
|
|
ef6000PortTxC2Octets64 |
OCTET STRING |
|
|
ef6000PortRxC2Octets64 |
OCTET STRING |
|
|
ef6000PortTxC3Words64 |
OCTET STRING |
|
|
ef6000PortRxC3Words64 |
OCTET STRING |
|
|
ef6000PortTxC3Frames64 |
OCTET STRING |
|
|
ef6000PortRxC3Frames64 |
OCTET STRING |
|
|
ef6000PortTxC3Octets64 |
OCTET STRING |
|
|
ef6000PortRxC3Octets64 |
OCTET STRING |
|
|
ef6000PortC3Discards64 |
OCTET STRING |
|
Ef6000PortBindingEntry |
|
SEQUENCE |
|
|
|
|
ef6000PortBindingIndex |
Ef6000PortIndex |
|
|
ef6000PortBindingFlag |
INTEGER |
|
|
ef6000PortConfiguredWWN |
Ef6000PortWWN |
|
|
ef6000PortAttachedWWN |
Ef6000PortWWN |
|
Ef6000ActiveZoneEntry |
|
SEQUENCE |
|
|
|
|
ef6000ZoneIndex |
INTEGER |
|
|
ef6000ZoneName |
DisplayString |
|
|
ef6000ZoneMemberCount |
INTEGER |
|
Ef6000ActiveMemberEntry |
|
SEQUENCE |
|
|
|
|
ef6000MemberZoneIndex |
INTEGER |
|
|
ef6000MemberIndex |
INTEGER |
|
|
ef6000MemberType |
INTEGER |
|
|
ef6000MemberWWN |
Ef6000PortWWN |
|
|
ef6000MemberDomainID |
INTEGER |
|
|
ef6000MemberPortNumber |
INTEGER |
|
Ef6000TAEntry |
|
SEQUENCE |
|
|
|
|
ef6000TAIndex |
INTEGER |
|
|
ef6000TAName |
DisplayString |
|
|
ef6000TAState |
INTEGER |
|
|
ef6000TAType |
INTEGER |
|
|
ef6000TAPortType |
INTEGER |
|
|
ef6000TAPortList |
Ef6000PortList |
|
|
ef6000TAInterval |
INTEGER |
|
|
ef6000TATriggerValue |
INTEGER |
|
|
ef6000TTADirection |
INTEGER |
|
|
ef6000TTATriggerDuration |
INTEGER |
|
|
ef6000CTACounter |
INTEGER |
|
Defined Values
mcData |
1.3.6.1.4.1.289 |
OBJECT IDENTIFIER |
|
|
|
commDev |
1.3.6.1.4.1.289.2 |
OBJECT IDENTIFIER |
|
|
|
fcSwitch |
1.3.6.1.4.1.289.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
ef-6000 |
1.3.6.1.4.1.289.2.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
ef6000Sys |
1.3.6.1.4.1.289.2.1.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
ef6000Fru |
1.3.6.1.4.1.289.2.1.1.2.2 |
OBJECT IDENTIFIER |
|
|
|
ef6000Port |
1.3.6.1.4.1.289.2.1.1.2.3 |
OBJECT IDENTIFIER |
|
|
|
ef6000TA |
1.3.6.1.4.1.289.2.1.1.2.6 |
OBJECT IDENTIFIER |
|
|
|
ef6000SysBootDate |
1.3.6.1.4.1.289.2.1.1.2.1.2 |
The date and time of the last IPL of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysTypeNum |
1.3.6.1.4.1.289.2.1.1.2.1.4 |
The ASCII type number of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysModelNum |
1.3.6.1.4.1.289.2.1.1.2.1.5 |
The ASCII model number of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysMfg |
1.3.6.1.4.1.289.2.1.1.2.1.6 |
The ASCII manufacturer of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysPlantOfMfg |
1.3.6.1.4.1.289.2.1.1.2.1.7 |
The ASCII plant of manufacturer of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysEcLevel |
1.3.6.1.4.1.289.2.1.1.2.1.8 |
The ASCII EC level ID of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysSerialNum |
1.3.6.1.4.1.289.2.1.1.2.1.9 |
The ASCII system serial number of the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000SysState |
1.3.6.1.4.1.289.2.1.1.2.1.11 |
If the operational status of the switch is
operational, the switch will be in one of the four states:
online(1), coming-online(2), offline(3), and going-offline(4). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), coming-online(2), offline(3), going-offline(4) |
|
ef6000SysAdmStatus |
1.3.6.1.4.1.289.2.1.1.2.1.12 |
The desired administrative status
of the switch. A management station may place the switch
in a desired state by setting this object accordingly.
The desired administrative status are online(1) and offline(2).
The online means setting the switch to be accessible by
an external Fibre Channel port, and offline means setting
the switch to be inaccessible. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2) |
|
ef6000SysConfigSpeed |
1.3.6.1.4.1.289.2.1.1.2.1.13 |
Switch speed capability. It's a user initiated option
to adjust the system-wide port speed capability. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
one-gig(1), two-gig(2) |
|
ef6000FruTable |
1.3.6.1.4.1.289.2.1.1.2.2.1 |
A table that contains one entry for each module. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ef6000FruEntry |
|
ef6000FruEntry |
1.3.6.1.4.1.289.2.1.1.2.2.1.1 |
An entry containing the service parameters of the module. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000FruEntry |
|
|
ef6000FruCode |
1.3.6.1.4.1.289.2.1.1.2.2.1.1.1 |
Field Replaceable Unit.
A hardware component of the product that is replaceable
as an entire unit. Each module defined in this MIB has
a fixed FRU code. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000FruCode |
|
|
ef6000FruPosition |
1.3.6.1.4.1.289.2.1.1.2.2.1.1.2 |
This object identifies the position
of the module. The value starts from 1 to the maximum number of
the cards that can be contained within this switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000FruPosition |
|
|
ef6000FruStatus |
1.3.6.1.4.1.289.2.1.1.2.2.1.1.3 |
This object identifies the operational
status of the module. The active(1) state indicates that
the current module is active; The backup(2) state indicates
that the back up module is used; The update-busy (3) state
indicates that the module is in the updating process;
The failed(4) state indicates that the current module is failed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), backup(2), update-busy(3), failed(4) |
|
ef6000FruPowerOnHours |
1.3.6.1.4.1.289.2.1.1.2.2.1.1.6 |
The number of the hours that the
FRU has been in operation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000FruTestDate |
1.3.6.1.4.1.289.2.1.1.2.2.1.1.7 |
The final test date of the module. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000PortTable |
1.3.6.1.4.1.289.2.1.1.2.3.1 |
A table that contains one entry
for each switch port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ef6000PortEntry |
|
ef6000PortEntry |
1.3.6.1.4.1.289.2.1.1.2.3.1.1 |
An entry containing the information of the switch port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000PortEntry |
|
|
ef6000PortIndex |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.1 |
The fixed physical port number on the switch.
It ranges from 1 to the number of physical ports that can be
supported in the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000PortIndex |
|
|
ef6000PortOpStatus |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.3 |
The operational status of the port.
The online(1) state indicates that user frames can be passed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2), testing(3), faulty(4) |
|
ef6000PortAdmStatus |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.4 |
The desired state of the port.
A management station may place the port in a desired
state by setting this object accordingly. The testing(3)
state indicates that no user frames can be passed.
As the result of either explicit management action
or per configuration information accessible by the switch,
ef6000PortAdmStatus is then changed to either the online(1)
or testing(3) states, or remains in the offline state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2), testing(3) |
|
ef6000PortConnector |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.5 |
Supported connector types of the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), lc(2), mt-rj(3), mu(4), internal-port(5) |
|
ef6000PortDistance |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.6 |
A bit map to represent distance types of the Port.
bit 0 unknown
bit 1-3 reserved
bit 4 long distance (l)
bit 5 intermediate distance (i)
bit 6 short distance (s)
bit 7 very long distance |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..127 |
|
ef6000PortType |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.7 |
Supported transceiver types of the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), longDistance(2), longWaveLaser-LL(3), shortWaveLaser-OFC(4), shortWaveLaser-noOFC(5), longWaveLaser-LC(6) |
|
ef6000PortSpeedCap |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.9 |
A bit map to represent the speed of optical transceiver.
bit 0 100 MBytes/Sec
bit 1 reserved
bit 2 200 MBytes/Sec
bit 3 reserved
bit 4 400 MBytes/Sec
bit 5-7 reserved |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..127 |
|
ef6000PortConfigSpeed |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.10 |
The configured port speed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
one-gig(1), two-gig(2), negotiate(3) |
|
ef6000PortSpeed |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.11 |
The current operating speed of the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), one-gig(2), two-gig(3), negotiate(4) |
|
ef6000PortTxWords32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.20 |
A 32 bit counter for the number of words
within frames that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxWords32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.21 |
A 32 bit counter for the number of words
within frames that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxFrames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.22 |
A 32 bit counter for the number of (Fibre Channel) frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxFrames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.23 |
A 32 bit counter for the number of (Fibre Channel) frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxThroughput |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.24 |
The Bps (bytes per second) transmission rate of the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxThroughput |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.25 |
The Bps (bytes per second) reception rate of the port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC2Words32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.30 |
A 32 bit counter for the number of class 2 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC2Words32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.31 |
A 32 bit counter for the number of class 2 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC2Frames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.32 |
A 32 bit counter for the number of Class 2 frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC2Frames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.33 |
A 32 bit counter for the number of Class 2 frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC2Octets32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.34 |
A 32 bit counter for the number of Class 2 Octets
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC2Octets32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.35 |
A 32 bit counter for the number of Class 2 Octets
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC3Words32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.40 |
A 32 bit counter for the number of class 3 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC3Words32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.41 |
A 32 bit counter for the number of class 3 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC3Frames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.42 |
A 32 bit counter for the number of Class 3 frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC3Frames32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.43 |
A 32 bit counter for the number of Class 3 frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxC3Octets32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.44 |
A 32 bit counter for the number of Class 3 Octets
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxC3Octets32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.45 |
A 32 bit counter for the number of Class 3 Octets
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortC3Discards32 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.46 |
A 32 bit counter for the number of Class 3 frames
that the port has discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortDiscardFrames |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.50 |
The number of frames
that the port has discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxLinkResets |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.51 |
The number of link resets
initiated by this switch port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxLinkResets |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.52 |
The number of link resets
initiated by the attached N_port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxOLSs |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.53 |
The number of offline sequences
initiated by this switch port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortRxOLSs |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.54 |
The number of offline sequences
initiated by the attached N_port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortSyncLosses |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.60 |
The number of loss of synchronization timeout. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortSigLosses |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.61 |
The number of times that a Loss of Signal is detected. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortInvalidTxWords |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.63 |
The number of Invalid Transmission words
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortLinkFailures |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.64 |
The number of transitions to an LFx state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortCrcs |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.65 |
The number of CRC errors
detected from frames received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTruncs |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.66 |
The number of frames shorter than the Fibre Channel minimum. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ef6000PortTxWords64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.67 |
A 64 bit counter for the number of words
within frames that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxWords64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.68 |
A 64 bit counter for the number of words
within frames that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxFrames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.69 |
A 64 bit counter for the number of (Fibre Channel) frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxFrames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.70 |
A 64 bit counter for the number of (Fibre Channel) frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC2Words64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.71 |
A 64 bit counter for the number of class 2 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC2Words64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.72 |
A 64 bit counter for the number of class 2 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC2Frames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.73 |
A 64 bit counter for the number of Class 2 frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC2Frames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.74 |
A 64 bit counter for the number of Class 2 frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC2Octets64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.75 |
A 64 bit counter for the number of Class 2 Octets
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC2Octets64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.76 |
A 64 bit counter for the number of Class 2 Octets
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC3Words64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.77 |
A 64 bit counter for the number of class 3 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC3Words64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.78 |
A 64 bit counter for the number of class 3 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC3Frames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.79 |
A 64 bit counter for the number of Class 3 frames
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC3Frames64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.80 |
A 64 bit counter for the number of Class 3 frames
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortTxC3Octets64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.81 |
A 64 bit counter for the number of Class 3 Octets
that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortRxC3Octets64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.82 |
A 64 bit counter for the number of Class 3 Octets
that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortC3Discards64 |
1.3.6.1.4.1.289.2.1.1.2.3.1.1.83 |
A 64 bit counter for the number of Class 3 frames
that the port has discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(8) |
|
ef6000PortBindingEntry |
1.3.6.1.4.1.289.2.1.1.2.4.1.1 |
An entry containing the port binding information
of the switch port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000PortBindingEntry |
|
|
ef6000PortBindingIndex |
1.3.6.1.4.1.289.2.1.1.2.4.1.1.1 |
The fixed physical port number on the switch.
It ranges from 1 to the number of physical ports that can be
supported in the switch. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000PortIndex |
|
|
ef6000PortBindingFlag |
1.3.6.1.4.1.289.2.1.1.2.4.1.1.2 |
The flag indicates whether or not Port Binding
is in effect for an individual port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
ef6000PortAttachedWWN |
1.3.6.1.4.1.289.2.1.1.2.4.1.1.4 |
The WWN of the device currently attached to the port
whether it has successfully connected or is currently being rejected
due to a Port Binding violation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000PortWWN |
|
|
ef6000ActiveZoneSetName |
1.3.6.1.4.1.289.2.1.1.2.5.1 |
The active zone set name. This value will return NULL if the
active zone set state is disabled |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ef6000ActiveZoneCount |
1.3.6.1.4.1.289.2.1.1.2.5.2 |
The number of zones in the active zone set.
This value will return 0 if the active zone set state is disabled |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000DefaultZoneSetState |
1.3.6.1.4.1.289.2.1.1.2.5.3 |
The set state of the default zone set (1=Enabled,2= Disabled). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ef6000ActiveZoneSetState |
1.3.6.1.4.1.289.2.1.1.2.5.4 |
The state of the active zone set. If the active
zone set state is disabled, then ActiveZoneSetName and
ActiveZoneSetCount are invalid (1=Enabled,2= Disabled). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ef6000HardwareEnforcedZoning |
1.3.6.1.4.1.289.2.1.1.2.5.5 |
Indicates if zoning is hardware enforced
(1=Yes, 2=No). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
ef6000ActiveZoneEntry |
1.3.6.1.4.1.289.2.1.1.2.5.6.1 |
An entry containing the information specific to a zone. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000ActiveZoneEntry |
|
|
ef6000ZoneIndex |
1.3.6.1.4.1.289.2.1.1.2.5.6.1.1 |
Zone index number. This number will range from 1
to the number of zones specified by the ActiveZoneCount. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000ZoneName |
1.3.6.1.4.1.289.2.1.1.2.5.6.1.2 |
This object is the name of this zone entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ef6000ZoneMemberCount |
1.3.6.1.4.1.289.2.1.1.2.5.6.1.3 |
This object contains a count of the number of
members in this zone entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000ActiveMemberEntry |
1.3.6.1.4.1.289.2.1.1.2.5.7.1 |
An entry containing the information specific to a member. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000ActiveMemberEntry |
|
|
ef6000MemberZoneIndex |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.1 |
The index of the zone that this member belongs to.
This is the same value as ef6000ZoneIndex. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000MemberIndex |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.2 |
Member index number. This number will range from 1
to the number of members specified by the corresponding ZoneMemberCount. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000MemberType |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.3 |
This object is the type of addressing that is associated
with this member. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
wwn(1), portnumber(2) |
|
ef6000MemberWWN |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.4 |
The WWN name as an 8-octet string. This value is only valid
if the member type is 1, otherwise it will return all zeros. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000PortWWN |
|
|
ef6000MemberDomainID |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.5 |
The domain ID. This value is only valid if the member type is 2,
otherwise it will return NULL. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000MemberPortNumber |
1.3.6.1.4.1.289.2.1.1.2.5.7.1.6 |
The port number. This value is only valid if the member type is 2,
otherwise it will return NULL. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000TATable |
1.3.6.1.4.1.289.2.1.1.2.6.1 |
A table that contains one entry
for each configured threshold alert. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ef6000TAEntry |
|
ef6000TAEntry |
1.3.6.1.4.1.289.2.1.1.2.6.1.1 |
An entry containing a threshold alert configuration. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ef6000TAEntry |
|
|
ef6000TAIndex |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.1 |
This object is used to identify which threshold has been triggered. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000TAName |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.2 |
The threshold alert name. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
ef6000TAState |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.3 |
The current state of the threshold. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ef6000TAType |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.4 |
The type of the threshold. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
throughput(1), counter(2) |
|
ef6000TAPortType |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.5 |
A threshold can be set on a list of physical port numbers or
on all the ports of the specified type (ePorts, fPorts). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
list(1), ePorts(2), fPorts(3), flPorts(4) |
|
ef6000TAPortList |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.6 |
A bit map that identifies which ports this threhold alert
applies to (only valid if the Threshold Alert Port Type = list). The left
most bit represents the port 0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ef6000PortList |
|
|
ef6000TAInterval |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.7 |
The number of minutes in a threshold alert interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000TATriggerValue |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.8 |
If the alert type is a Throughput Threshold Alert, then this
is the percent utilization (1-100) required to trigger an alert.
If the alert type is a Counter Threshold Alert, then this is the counter
delta required to trigger an alert. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000TTADirection |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.9 |
This only applies when the alert type is a Throughput
Threshold Alert. It specifies the throughput direction of the threshold. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
transmit(1), receive(2), either(3) |
|
ef6000TTATriggerDuration |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.10 |
This only applies when the alert type is a
Throughput Threshold Alert. It specifies the amount of time
during a threshold alert interval that the trigger must be exceeded
before an alert is generated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000CTACounter |
1.3.6.1.4.1.289.2.1.1.2.6.1.1.11 |
This only applies when the alert type is a
Counter Threshold Alert. It specifies statistical counter
or counter set to be monitored. (This object is not supported
in the current release.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ef6000PortScn |
1 |
An ef6000PortScn(1) is generated
whenever a Fc_Port changes its operational state.
For instance, the Fc_Port goes from on-line to offline. |
TRAP-TYPE |
|
|
|
ef6000FruScn |
2 |
An ef6000FruScn(2) is generated
whenever a FRU status changes its operational state. |
TRAP-TYPE |
|
|
|
ef6000PortBindingViolation |
3 |
An ef6000PortBindingViolation(3) is generated
whenever the switch detects that a port binding violation occurs. |
TRAP-TYPE |
|
|
|
ef6000ThresholdAlert |
4 |
An ef6000ThresholdAlert(4) is generated
whenever a threshold alert occurs. |
TRAP-TYPE |
|
|
|