EES-POWER-FERRO-MIB

File: EES-POWER-FERRO-MIB.mib (49551 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 enterprises
TEXTUAL-CONVENTION DisplayString DateAndTime

Defined Types

Status  
This integer value represents the operational or administrative status of the system. Also used as alarm severity. Depending on situation there may be limits on allowed values. Operational values: (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) warning - OA, lowest level of 'abnormal' status (4) minor - A3 (5) major - MA (6) critical - CA, highest level of 'abnormal' status Administrative values: (7) unmanaged (8) restricted (9) testing (10) disabled
TEXTUAL-CONVENTION    
  INTEGER unknown(1), normal(2), warning(3), minor(4), major(5), critical(6), unmanaged(7), restricted(8), testing(9), disabled(10)  

StatusChange  
Indicates 'activated' (1) or 'deactivated' (2) alarm events.
TEXTUAL-CONVENTION    
  INTEGER activated(1), deactivated(2)  

PSBatteryEntry  
SEQUENCE    
  psBatteryIndex Integer32
  psBatteryCurrent Integer32
  psBatteryName DisplayString

PSTemperatureEntry  
SEQUENCE    
  psTemperatureIndex Integer32
  psTemperatureMeasurement Integer32
  psTemperatureName DisplayString
  psTemperatureType INTEGER
  psTemperatureAlarmStatus INTEGER

PSRectifierEntry  
SEQUENCE    
  psRectifierIndex Integer32
  psRectifierProductNumber DisplayString
  psRectifierHWVersion DisplayString
  psRectifierSWVersion DisplayString
  psRectifierSerialNumber DisplayString
  psRectifierCurrent Integer32
  psRectifierIdent DisplayString
  psRectifierFail StatusChange

PSDistributionLoadEntry  
SEQUENCE    
  psDistributionLoadIndex Integer32
  psDistributionLoadCurrent Integer32
  psDistributionLoadName DisplayString

PSDistributionGeneralEntry  
SEQUENCE    
  psDistributionGeneralIndex Integer32
  psDistributionGeneralCurrent Integer32
  psDistributionGeneralName DisplayString

PSConverterEntry  
SEQUENCE    
  psConverterIndex Integer32
  psConverterProductNumber DisplayString
  psConverterHWVersion DisplayString
  psConverterSWVersion DisplayString
  psConverterSerialNumber DisplayString
  psConverterCurrent Integer32
  psConverterIdent DisplayString
  psConverterFail StatusChange

EquipmentSignalTableEntry  
SEQUENCE    
  psEquipmentSignalTableEntryIndex Integer32
  psEquipmentSignalValue Integer32

PSSMDUHEntry  
SEQUENCE    
  psSMDUHCurrentIndex Integer32
  psSMDUHCurrent1 Integer32
  psSMDUHCurrent2 Integer32
  psSMDUHCurrent3 Integer32
  psSMDUHCurrent4 Integer32
  psSMDUHCurrent5 Integer32
  psSMDUHCurrent6 Integer32
  psSMDUHCurrent7 Integer32
  psSMDUHCurrent8 Integer32
  psSMDUHCurrent9 Integer32
  psSMDUHCurrent10 Integer32
  psSMDUHCurrent11 Integer32
  psSMDUHCurrent12 Integer32
  psSMDUHCurrent13 Integer32
  psSMDUHCurrent14 Integer32
  psSMDUHCurrent15 Integer32
  psSMDUHCurrent16 Integer32
  psSMDUHCurrent17 Integer32
  psSMDUHCurrent18 Integer32
  psSMDUHCurrent19 Integer32
  psSMDUHCurrent20 Integer32

PsSMDUHPowerEntry  
SEQUENCE    
  psSMDUHPowerIndex Integer32
  psSMDUHPower1 Integer32
  psSMDUHPower2 Integer32
  psSMDUHPower3 Integer32
  psSMDUHPower4 Integer32
  psSMDUHPower5 Integer32
  psSMDUHPower6 Integer32
  psSMDUHPower7 Integer32
  psSMDUHPower8 Integer32
  psSMDUHPower9 Integer32
  psSMDUHPower10 Integer32
  psSMDUHPower11 Integer32
  psSMDUHPower12 Integer32
  psSMDUHPower13 Integer32
  psSMDUHPower14 Integer32
  psSMDUHPower15 Integer32
  psSMDUHPower16 Integer32
  psSMDUHPower17 Integer32
  psSMDUHPower18 Integer32
  psSMDUHPower19 Integer32
  psSMDUHPower20 Integer32

PsSMDUHEnergyEntry  
SEQUENCE    
  psSMDUHEnergyIndex Integer32
  psSMDUHTotalEnergy1 Integer32
  psSMDUHTotalEnergy2 Integer32
  psSMDUHTotalEnergy3 Integer32
  psSMDUHTotalEnergy4 Integer32
  psSMDUHTotalEnergy5 Integer32
  psSMDUHTotalEnergy6 Integer32
  psSMDUHTotalEnergy7 Integer32
  psSMDUHTotalEnergy8 Integer32
  psSMDUHTotalEnergy9 Integer32
  psSMDUHTotalEnergy10 Integer32
  psSMDUHTotalEnergy11 Integer32
  psSMDUHTotalEnergy12 Integer32
  psSMDUHTotalEnergy13 Integer32
  psSMDUHTotalEnergy14 Integer32
  psSMDUHTotalEnergy15 Integer32
  psSMDUHTotalEnergy16 Integer32
  psSMDUHTotalEnergy17 Integer32
  psSMDUHTotalEnergy18 Integer32
  psSMDUHTotalEnergy19 Integer32
  psSMDUHTotalEnergy20 Integer32

ActiveAlarmEntry  
SEQUENCE    
  alarmIndex Counter32
  alarmTime DateAndTime
  alarmStatusChange StatusChange
  alarmSeverity Status
  alarmDescription DisplayString
  alarmType Integer32

Defined Values

powerMIB 1.3.6.1.4.1.6302.2.1
Emerson Energy Systems (EES) Power MIB, For SMDUH.
MODULE-IDENTITY    

ees 1.3.6.1.4.1.6302
OBJECT IDENTIFIER    

global 1.3.6.1.4.1.6302.2
OBJECT IDENTIFIER    

ident 1.3.6.1.4.1.6302.2.1.1
OBJECT IDENTIFIER    

identManufacturer 1.3.6.1.4.1.6302.2.1.1.1
The name of the equipment manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

identModel 1.3.6.1.4.1.6302.2.1.1.2
The manufacturers model designation of the power system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

identControllerFirmwareVersion 1.3.6.1.4.1.6302.2.1.1.3
The firmware (software) version of the controller.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

identName 1.3.6.1.4.1.6302.2.1.1.4
The name of the power plant. This object should be set by the administrator.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

identSNMPCfgVer 1.3.6.1.4.1.6302.2.1.1.5
The name of the power plant. This object should be set by the administrator.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

system 1.3.6.1.4.1.6302.2.1.2
OBJECT IDENTIFIER    

systemStatus 1.3.6.1.4.1.6302.2.1.2.1
Status of the complete plant (highest alarm). One of (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) warning - OA, lowest level of 'abnormal' status (4) minor - A3 (5) major - MA (6) critical - CA, highest level of 'abnormal' status (7) unmanaged (8) restricted (9) testing (10) disabled
Status: current Access: read-only
OBJECT-TYPE    
  Status  

systemVoltage 1.3.6.1.4.1.6302.2.1.2.2
System voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

systemCurrent 1.3.6.1.4.1.6302.2.1.2.3
System current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

systemUsedCapacity 1.3.6.1.4.1.6302.2.1.2.4
Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psBattery 1.3.6.1.4.1.6302.2.1.2.5
OBJECT IDENTIFIER    

psBatteryVoltage 1.3.6.1.4.1.6302.2.1.2.5.1
Battery voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTotalBatteryCurrent 1.3.6.1.4.1.6302.2.1.2.5.2
Battery current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psBatteryCapacity 1.3.6.1.4.1.6302.2.1.2.5.3
Calculated capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psBatteryNominalCapacity 1.3.6.1.4.1.6302.2.1.2.5.4
nominal installed capacity, stored as mAh. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psBatteryTable 1.3.6.1.4.1.6302.2.1.2.5.5
Battery Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSBatteryEntry

psBatteryEntry 1.3.6.1.4.1.6302.2.1.2.5.5.1
Battery Measurement Table Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSBatteryEntry  

psBatteryIndex 1.3.6.1.4.1.6302.2.1.2.5.5.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16777215  

psBatteryCurrent 1.3.6.1.4.1.6302.2.1.2.5.5.1.2
Battery current in Amps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psBatteryName 1.3.6.1.4.1.6302.2.1.2.5.5.1.3
Battery shunt name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psInput 1.3.6.1.4.1.6302.2.1.2.6
OBJECT IDENTIFIER    

psInputLineAVoltage 1.3.6.1.4.1.6302.2.1.2.6.1
The AC line A voltage, stored as mV. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psInputLineBVoltage 1.3.6.1.4.1.6302.2.1.2.6.2
The AC line B voltage, stored as mV. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psInputLineCVoltage 1.3.6.1.4.1.6302.2.1.2.6.3
The AC line C voltage, stored as mV. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTemperature 1.3.6.1.4.1.6302.2.1.2.7
OBJECT IDENTIFIER    

psTemperature1 1.3.6.1.4.1.6302.2.1.2.7.1
The first route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTemperature2 1.3.6.1.4.1.6302.2.1.2.7.2
The second route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value..
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTemperatureTable 1.3.6.1.4.1.6302.2.1.2.7.3
Temperature Measurement Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSTemperatureEntry

psTemperatureEntry 1.3.6.1.4.1.6302.2.1.2.7.3.1
Temperature Measurement Table Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSTemperatureEntry  

psTemperatureIndex 1.3.6.1.4.1.6302.2.1.2.7.3.1.1
Temperature Probe Number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..71  

psTemperatureMeasurement 1.3.6.1.4.1.6302.2.1.2.7.3.1.2
Temperature Value In Centigrade.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTemperatureName 1.3.6.1.4.1.6302.2.1.2.7.3.1.3
Configured Temperature Probe Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psTemperatureType 1.3.6.1.4.1.6302.2.1.2.7.3.1.4
Temperature Probe Type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), ambient(1), battery(2)  

psTemperatureAlarmStatus 1.3.6.1.4.1.6302.2.1.2.7.3.1.5
Temperature Probe Alarm Status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER high(0), low(1), fail(2), none(3)  

psStatusCommunication 1.3.6.1.4.1.6302.2.1.2.8
The status of communication with the Power System. interrupt(3) indicates some errors occurred between Power System and agent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), normal(2), interrupt(3)  

psStatusBatteryMode 1.3.6.1.4.1.6302.2.1.2.9
The status of battery modes, FloatCharging(2), ShortTest(3), BoostChargingForTest(4), ManualTesting(5), PlanTesting(6), ACFailTesting(7), ACFail(8), ManualBoostCharging(9), AutoBoostCharging(10), CyclicBoostCharging(11), MasterBoostCharging(12), MasterBateryTesting(13).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), floatCharging(2), shortTest(3), bcForTest(4), manualTesting(5), planTesting(6), acFailTesting(7), acFail(8), manualBC(9), autoBC(10), cyclicBC(11), masterBC(12), masterBT(13)  

psSMNumber 1.3.6.1.4.1.6302.2.1.2.10
OBJECT IDENTIFIER    

psSMACNumber 1.3.6.1.4.1.6302.2.1.2.10.1
The number of SM AC module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMBATNumber 1.3.6.1.4.1.6302.2.1.2.10.2
The number of SM BAT module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMIONumber 1.3.6.1.4.1.6302.2.1.2.10.3
The number of SM IO module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psRectifier 1.3.6.1.4.1.6302.2.1.2.11
OBJECT IDENTIFIER    

numberOfInstalledRectifiers 1.3.6.1.4.1.6302.2.1.2.11.1
number of rectifiers, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

numberOfRectifiersCommunicating 1.3.6.1.4.1.6302.2.1.2.11.2
number of rectifiers communicating, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rectifiersUsedCapacity 1.3.6.1.4.1.6302.2.1.2.11.3
Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psRectifierTable 1.3.6.1.4.1.6302.2.1.2.11.4
Table holding information about indivual rectifiers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSRectifierEntry

psRectifierEntry 1.3.6.1.4.1.6302.2.1.2.11.4.1
An entry (conceptual row) in the rectifierInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSRectifierEntry  

psRectifierIndex 1.3.6.1.4.1.6302.2.1.2.11.4.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16777215  

psRectifierProductNumber 1.3.6.1.4.1.6302.2.1.2.11.4.1.2
Rectifier Product Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psRectifierHWVersion 1.3.6.1.4.1.6302.2.1.2.11.4.1.3
Rectifier Hardware Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psRectifierSWVersion 1.3.6.1.4.1.6302.2.1.2.11.4.1.4
Rectifier Software Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psRectifierSerialNumber 1.3.6.1.4.1.6302.2.1.2.11.4.1.5
Rectifier Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psRectifierCurrent 1.3.6.1.4.1.6302.2.1.2.11.4.1.6
Rectifier Current.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psRectifierIdent 1.3.6.1.4.1.6302.2.1.2.11.4.1.7
Rectifier physical location identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psRectifierFail 1.3.6.1.4.1.6302.2.1.2.11.4.1.8
The type of alarm change. One of (1) activated (2) deactivated
Status: current Access: read-only
OBJECT-TYPE    
  StatusChange  

psDistribution 1.3.6.1.4.1.6302.2.1.2.12
OBJECT IDENTIFIER    

psTotalLoadCurrent 1.3.6.1.4.1.6302.2.1.2.12.1
Total Load current, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psDistributionLoadTable 1.3.6.1.4.1.6302.2.1.2.12.2
Distribution Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSDistributionLoadEntry

psDistributionLoadEntry 1.3.6.1.4.1.6302.2.1.2.12.2.1
Distribution Measurement Table Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSDistributionLoadEntry  

psDistributionLoadIndex 1.3.6.1.4.1.6302.2.1.2.12.2.1.1
Automatically generated index object.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268386303  

psDistributionLoadCurrent 1.3.6.1.4.1.6302.2.1.2.12.2.1.2
Distribution current in Amps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psDistributionLoadName 1.3.6.1.4.1.6302.2.1.2.12.2.1.3
Distribution name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psDistributionGeneralTable 1.3.6.1.4.1.6302.2.1.2.12.3
Distribution Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSDistributionGeneralEntry

psDistributionGeneralEntry 1.3.6.1.4.1.6302.2.1.2.12.3.1
Distribution Measurement Table Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSDistributionGeneralEntry  

psDistributionGeneralIndex 1.3.6.1.4.1.6302.2.1.2.12.3.1.1
Automatically generated index object.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..268386303  

psDistributionGeneralCurrent 1.3.6.1.4.1.6302.2.1.2.12.3.1.2
Distribution current in Amps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psDistributionGeneralName 1.3.6.1.4.1.6302.2.1.2.12.3.1.3
Distribution name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverter 1.3.6.1.4.1.6302.2.1.2.13
OBJECT IDENTIFIER    

numberOfInstalledConverters 1.3.6.1.4.1.6302.2.1.2.13.1
number of converters, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

numberOfConvertersCommunicating 1.3.6.1.4.1.6302.2.1.2.13.2
number of converters communicating, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

convertersUsedCapacity 1.3.6.1.4.1.6302.2.1.2.13.3
Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psConverterVoltage 1.3.6.1.4.1.6302.2.1.2.13.4
Converter voltage in mV. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psTotalConverterCurrent 1.3.6.1.4.1.6302.2.1.2.13.5
Total Converter current in Amps. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psConverterTable 1.3.6.1.4.1.6302.2.1.2.13.6
Table holding information about indivual converters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSConverterEntry

psConverterEntry 1.3.6.1.4.1.6302.2.1.2.13.6.1
An entry (conceptual row) in the ConverterInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSConverterEntry  

psConverterIndex 1.3.6.1.4.1.6302.2.1.2.13.6.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

psConverterProductNumber 1.3.6.1.4.1.6302.2.1.2.13.6.1.2
Converter Product Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverterHWVersion 1.3.6.1.4.1.6302.2.1.2.13.6.1.3
Converter Hardware Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverterSWVersion 1.3.6.1.4.1.6302.2.1.2.13.6.1.4
Converter Software Revision.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverterSerialNumber 1.3.6.1.4.1.6302.2.1.2.13.6.1.5
Converter Serial Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverterCurrent 1.3.6.1.4.1.6302.2.1.2.13.6.1.6
Converter Current.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psConverterIdent 1.3.6.1.4.1.6302.2.1.2.13.6.1.7
Converter physical location identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

psConverterFail 1.3.6.1.4.1.6302.2.1.2.13.6.1.8
The type of alarm change. One of (1) activated (2) deactivated
Status: current Access: read-only
OBJECT-TYPE    
  StatusChange  

psControl 1.3.6.1.4.1.6302.2.1.2.14
OBJECT IDENTIFIER    

controlBatteryTest 1.3.6.1.4.1.6302.2.1.2.14.1
Control battery test, start(1), stop (0).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

controlRelay8 1.3.6.1.4.1.6302.2.1.2.14.2
Control relay8, close(1), open(0).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

controlRelay7 1.3.6.1.4.1.6302.2.1.2.14.3
Control relay7, close(1), open(0).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

controlRelay6 1.3.6.1.4.1.6302.2.1.2.14.4
Control relay6, close(1), open(0).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

controlRelayTest 1.3.6.1.4.1.6302.2.1.2.14.5
Control Relay test, start(1), stop (0).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

psEquipmentSignalTable 1.3.6.1.4.1.6302.2.1.2.15
Table of indexed equipment signal values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EquipmentSignalTableEntry

equipmentSignalTableEntry 1.3.6.1.4.1.6302.2.1.2.15.1
An entry (conceptual row) in the psEquipment Signal Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EquipmentSignalTableEntry  

psEquipmentSignalTableEntryIndex 1.3.6.1.4.1.6302.2.1.2.15.1.1
The unique sequence number of this equipment signal.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..268386303  

psEquipmentSignalValue 1.3.6.1.4.1.6302.2.1.2.15.1.2
Indexed equipment signal value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent 1.3.6.1.4.1.6302.2.1.2.16
OBJECT IDENTIFIER    

numberOfInstalledSMDUH 1.3.6.1.4.1.6302.2.1.2.16.1
number of SMDHU units, stored as integer. The integer 2147483647 represents invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH1Voltage 1.3.6.1.4.1.6302.2.1.2.16.2
SMDUH1 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH2Voltage 1.3.6.1.4.1.6302.2.1.2.16.3
SMDUH2 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH3Voltage 1.3.6.1.4.1.6302.2.1.2.16.4
SMDUH3 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH4Voltage 1.3.6.1.4.1.6302.2.1.2.16.5
SMDUH4 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH5Voltage 1.3.6.1.4.1.6302.2.1.2.16.6
SMDUH5 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH6Voltage 1.3.6.1.4.1.6302.2.1.2.16.7
SMDUH6 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH7Voltage 1.3.6.1.4.1.6302.2.1.2.16.8
SMDUH7 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUH8Voltage 1.3.6.1.4.1.6302.2.1.2.16.9
SMDU8 Voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrentTable 1.3.6.1.4.1.6302.2.1.2.16.10
Table holding information about SMDUH currents.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSSMDUHEntry

psSMDUHCurrentEntry 1.3.6.1.4.1.6302.2.1.2.16.10.1
An entry (conceptual row) in the SMDUHTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSSMDUHEntry  

psSMDUHCurrentIndex 1.3.6.1.4.1.6302.2.1.2.16.10.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

psSMDUHCurrent1 1.3.6.1.4.1.6302.2.1.2.16.10.1.2
SMDUH Current 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent2 1.3.6.1.4.1.6302.2.1.2.16.10.1.3
SMDUH Current 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent3 1.3.6.1.4.1.6302.2.1.2.16.10.1.4
SMDUH Current 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent4 1.3.6.1.4.1.6302.2.1.2.16.10.1.5
SMDUH Current 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent5 1.3.6.1.4.1.6302.2.1.2.16.10.1.6
SMDUH Current 5.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent6 1.3.6.1.4.1.6302.2.1.2.16.10.1.7
SMDUH Current 6.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent7 1.3.6.1.4.1.6302.2.1.2.16.10.1.8
SMDUH Current 7.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent8 1.3.6.1.4.1.6302.2.1.2.16.10.1.9
SMDUH Current 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent9 1.3.6.1.4.1.6302.2.1.2.16.10.1.10
SMDUH Current 9.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent10 1.3.6.1.4.1.6302.2.1.2.16.10.1.11
SMDUH Current 10.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent11 1.3.6.1.4.1.6302.2.1.2.16.10.1.12
SMDUH Current 11.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent12 1.3.6.1.4.1.6302.2.1.2.16.10.1.13
SMDUH Current 12.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent13 1.3.6.1.4.1.6302.2.1.2.16.10.1.14
SMDUH Current 13.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent14 1.3.6.1.4.1.6302.2.1.2.16.10.1.15
SMDUH Current 14.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent15 1.3.6.1.4.1.6302.2.1.2.16.10.1.16
SMDUH Current 15.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent16 1.3.6.1.4.1.6302.2.1.2.16.10.1.17
SMDUH Current 16.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent17 1.3.6.1.4.1.6302.2.1.2.16.10.1.18
SMDUH Current 17.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent18 1.3.6.1.4.1.6302.2.1.2.16.10.1.19
SMDUH Current 18.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent19 1.3.6.1.4.1.6302.2.1.2.16.10.1.20
SMDUH Current 19.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHCurrent20 1.3.6.1.4.1.6302.2.1.2.16.10.1.21
SMDUH Current 20.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower 1.3.6.1.4.1.6302.2.1.2.17
OBJECT IDENTIFIER    

psSMDUHPowerTable 1.3.6.1.4.1.6302.2.1.2.17.1
Table holding information about SMDUH power.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSSMDUHEntry

psSMDUHPowerEntry 1.3.6.1.4.1.6302.2.1.2.17.1.1
An entry (conceptual row) in the SMDUHPowerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSSMDUHEntry  

psSMDUHPowerIndex 1.3.6.1.4.1.6302.2.1.2.17.1.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

psSMDUHPower1 1.3.6.1.4.1.6302.2.1.2.17.1.1.2
SMDUH Power 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower2 1.3.6.1.4.1.6302.2.1.2.17.1.1.3
SMDUH Power 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower3 1.3.6.1.4.1.6302.2.1.2.17.1.1.4
SMDUH Power 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower4 1.3.6.1.4.1.6302.2.1.2.17.1.1.5
SMDUH Power 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower5 1.3.6.1.4.1.6302.2.1.2.17.1.1.6
SMDUH Power 5.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower6 1.3.6.1.4.1.6302.2.1.2.17.1.1.7
SMDUH Power 6.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower7 1.3.6.1.4.1.6302.2.1.2.17.1.1.8
SMDUH Power 7.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower8 1.3.6.1.4.1.6302.2.1.2.17.1.1.9
SMDUH Power 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower9 1.3.6.1.4.1.6302.2.1.2.17.1.1.10
SMDUH Power 9.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower10 1.3.6.1.4.1.6302.2.1.2.17.1.1.11
SMDUH Power 10.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower11 1.3.6.1.4.1.6302.2.1.2.17.1.1.12
SMDUH Power 11.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower12 1.3.6.1.4.1.6302.2.1.2.17.1.1.13
SMDUH Power 12.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower13 1.3.6.1.4.1.6302.2.1.2.17.1.1.14
SMDUH Power 13.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower14 1.3.6.1.4.1.6302.2.1.2.17.1.1.15
SMDUH Power 14.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower15 1.3.6.1.4.1.6302.2.1.2.17.1.1.16
SMDUH Power 15.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower16 1.3.6.1.4.1.6302.2.1.2.17.1.1.17
SMDUH Power 16.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower17 1.3.6.1.4.1.6302.2.1.2.17.1.1.18
SMDUH Power 17.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower18 1.3.6.1.4.1.6302.2.1.2.17.1.1.19
SMDUH Power 18.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower19 1.3.6.1.4.1.6302.2.1.2.17.1.1.20
SMDUH Power 19.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHPower20 1.3.6.1.4.1.6302.2.1.2.17.1.1.21
SMDUH Power 20.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHEnergy 1.3.6.1.4.1.6302.2.1.2.18
OBJECT IDENTIFIER    

psSMDUHEnergyTable 1.3.6.1.4.1.6302.2.1.2.18.1
Table holding information about SMDUH energy counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PSSMDUHEntry

psSMDUHEnergyEntry 1.3.6.1.4.1.6302.2.1.2.18.1.1
An entry (conceptual row) in the SMDUHEnergyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PSSMDUHEntry  

psSMDUHEnergyIndex 1.3.6.1.4.1.6302.2.1.2.18.1.1.1
Automatically generated index object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

psSMDUHTotalEnergy1 1.3.6.1.4.1.6302.2.1.2.18.1.1.2
SMDUH Total Energy 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy2 1.3.6.1.4.1.6302.2.1.2.18.1.1.3
SMDUH Total Energy 2.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy3 1.3.6.1.4.1.6302.2.1.2.18.1.1.4
SMDUH Total Energy 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy4 1.3.6.1.4.1.6302.2.1.2.18.1.1.5
SMDUH Total Energy 4.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy5 1.3.6.1.4.1.6302.2.1.2.18.1.1.6
SMDUH Total Energy 5.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy6 1.3.6.1.4.1.6302.2.1.2.18.1.1.7
SMDUH Total Energy 6.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy7 1.3.6.1.4.1.6302.2.1.2.18.1.1.8
SMDUH Total Energy 7.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy8 1.3.6.1.4.1.6302.2.1.2.18.1.1.9
SMDUH Total Energy 8.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy9 1.3.6.1.4.1.6302.2.1.2.18.1.1.10
SMDUH Total Energy 9.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy10 1.3.6.1.4.1.6302.2.1.2.18.1.1.11
SMDUH Total Energy 10.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy11 1.3.6.1.4.1.6302.2.1.2.18.1.1.12
SMDUH Total Energy 11.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy12 1.3.6.1.4.1.6302.2.1.2.18.1.1.13
SMDUH Total Energy 12.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy13 1.3.6.1.4.1.6302.2.1.2.18.1.1.14
SMDUH Total Energy 13.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy14 1.3.6.1.4.1.6302.2.1.2.18.1.1.15
SMDUH Total Energy 14.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy15 1.3.6.1.4.1.6302.2.1.2.18.1.1.16
SMDUH Total Energy 15.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy16 1.3.6.1.4.1.6302.2.1.2.18.1.1.17
SMDUH Total Energy 16.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy17 1.3.6.1.4.1.6302.2.1.2.18.1.1.18
SMDUH Total Energy 17.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy18 1.3.6.1.4.1.6302.2.1.2.18.1.1.19
SMDUH Total Energy 18.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy19 1.3.6.1.4.1.6302.2.1.2.18.1.1.20
SMDUH Total Energy 19.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

psSMDUHTotalEnergy20 1.3.6.1.4.1.6302.2.1.2.18.1.1.21
SMDUH Total Energy 20.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmLastTrapNo 1.3.6.1.4.1.6302.2.1.3
The sequence number of last submitted alarm trap, also last row in alarmTrapTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alarmActiveAlarmTable 1.3.6.1.4.1.6302.2.1.4
Table holding information about the currently active alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActiveAlarmEntry

activeAlarmEntry 1.3.6.1.4.1.6302.2.1.4.1
An entry (conceptual row) in the alarmTrapTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ActiveAlarmEntry  

alarmIndex 1.3.6.1.4.1.6302.2.1.4.1.1
The unique sequence number of this alarm trap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alarmTime 1.3.6.1.4.1.6302.2.1.4.1.2
Date and time when event occured (local time), including timezone if supported by controller.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

alarmStatusChange 1.3.6.1.4.1.6302.2.1.4.1.3
The type of alarm change. One of (1) activated (2) deactivated
Status: current Access: read-only
OBJECT-TYPE    
  StatusChange  

alarmSeverity 1.3.6.1.4.1.6302.2.1.4.1.4
The severity of the alarm. One of (3) warning - OA, lowest level of alarm severity (4) minor - A3 (5) major - MA (6) critical - CA, highest level of alarm severity
Status: current Access: read-only
OBJECT-TYPE    
  Status  

alarmDescription 1.3.6.1.4.1.6302.2.1.4.1.5
Free-text description of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

alarmType 1.3.6.1.4.1.6302.2.1.4.1.6
Alarm type, i.e. an integer specifying the type of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

powerEvents 1.3.6.1.4.1.6302.2.1.5
OBJECT IDENTIFIER    

alarmTrap 1.3.6.1.4.1.6302.2.1.5.1
An alarm trap is sent when an alarm occurs (activated) or returns to normal state (deactivated). Alarm traps are logged in alarmTrapTable. Variables in this trap: * alarmIndex - The unique sequence number of this alarm trap. * alarmTime - Date and time when event occured (local time), including timezone if supported by controller. * alarmStatusChange - (1) activated or (2) deactivated. * alarmSeverity - Integer describing the severity of the alarm. * alarmDescription - Free-text description of alarm. * alarmType - Integer indicating type of alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

alarmActiveTrap 1.3.6.1.4.1.6302.2.1.5.2
An alarm trap is sent when an alarm occurs (activated) Variables in this trap * alarmTime - Date and time when event occured (local time), including timezone if supported by controller. * alarmSeverity - Integer describing the severity of the alarm. * alarmDescription - Free-text description of alarm. * alarmType - Integer indicating type of alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

alarmCeaseTrap 1.3.6.1.4.1.6302.2.1.5.3
An alarm trap is sent when an alarm returns to normal state (clear, deactivated). Variables in this trap: * alarmTime - Date and time when event occured (local time), including timezone if supported by controller. * alarmSeverity - Integer describing the severity of the alarm. * alarmDescription - Free-text description of alarm. * alarmType - Integer indicating type of alarm.
Status: current Access: read-only
NOTIFICATION-TYPE