E5-120-MIB

File: E5-120-MIB.mib (287013 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI RFC1213-MIB
SNMPv2-TC Q-BRIDGE-MIB P-BRIDGE-MIB
BRIDGE-MIB IEEE8021-CFM-MIB

Imported symbols

enterprises OBJECT-TYPE Counter32
Gauge32 Unsigned32 Counter64
IpAddress TimeTicks NOTIFICATION-TYPE
DisplayString PhysAddress ifIndex
RowStatus TEXTUAL-CONVENTION VlanIndex
PortList dot1qVlanIndex dot1dTrafficClass
MacAddress Timeout BridgeId
dot1dBasePort dot1agCfmMdIndex dot1agCfmMaIndex
dot1agCfmMepIdentifier

Defined Types

AlarmConfEntry  
SEQUENCE    
  alarmConfId INTEGER
  alarmConfFacility INTEGER
  alarmConfTarget INTEGER
  alarmConfSeverity INTEGER
  alarmConfClearable INTEGER

AlarmCurrEntry  
SEQUENCE    
  alarmCurrIndex INTEGER
  alarmCurrOccurTime TimeTicks
  alarmCurrTrapOid OBJECT IDENTIFIER
  alarmCurrParam1 INTEGER
  alarmCurrParam2 INTEGER
  alarmCurrParam3 INTEGER
  alarmCurrParam4 INTEGER
  alarmCurrParam5 INTEGER
  alarmCurrParam6 INTEGER
  alarmCurrParam7 INTEGER
  alarmCurrParam8 INTEGER
  alarmCurrTimeDescr DisplayString
  alarmCurrSeverity INTEGER
  alarmCurrDescr DisplayString

AlarmSeverityPortEntry  
SEQUENCE    
  severityThresh INTEGER

McastBwEntry  
SEQUENCE    
  mcastBwIndex INTEGER
  mcastBwStartIp IpAddress
  mcastBwEndIp IpAddress
  mcastBwBandwidth INTEGER
  mcastBwRowStatus RowStatus

McastBwPortEntry  
SEQUENCE    
  mcastBwPortEnable INTEGER
  mcastBwPortBandwidth INTEGER

IgmpCountPortEntry  
SEQUENCE    
  igmpCountPortEnable INTEGER
  igmpCountPortLimit INTEGER

MvlanEntry  
SEQUENCE    
  mvlanIndex VlanIndex
  mvlanName DisplayString
  mvlanEgressPorts PortList
  mvlanUntaggedPorts PortList
  mvlanRowStatus RowStatus

MvlanTranslateEntry  
SEQUENCE    
  mvlanTranslateIndex INTEGER
  mvlanTranslateStartIp IpAddress
  mvlanTranslateEndIp IpAddress

QryVidConfEntry  
SEQUENCE    
  qryVid INTEGER
  qryVidRowStatus RowStatus

QryVidStatusEntry  
SEQUENCE    
  qryVidType INTEGER

IgmpProfileEntry  
SEQUENCE    
  igmpProfileName DisplayString
  igmpProfileEnable INTEGER
  igmpProfileMaxGroup INTEGER
  igmpProfileRowStatus RowStatus

IgmpFilterEntry  
SEQUENCE    
  igmpFilterIndex INTEGER
  igmpFilterStartIp IpAddress
  igmpFilterEndIp IpAddress

IgmpProfilePortEntry  
SEQUENCE    
  igmpProfilePortProfile STRING

SubrPortEntry  
SEQUENCE    
  subrPortName DisplayString
  subrPortTel DisplayString

VdslLineConfEntry  
SEQUENCE    
  vdslLineConfUpbo INTEGER
  vdslLineConfVdslProfile INTEGER
  vdslLineConfRfiBand INTEGER
  vdslLineConfIpqosProfile DisplayString
  vdslLineConfVturInp INTEGER
  vdslLineConfVtucInp INTEGER
  vdslLineConfOptionMask INTEGER
  vdslLineConfUpboForceLength INTEGER
  vdslLineConfPsdShape INTEGER
  vdslLineConfDpbo INTEGER
  vdslLineConfDpboParamEsel INTEGER
  vdslLineConfDpboParamEscma INTEGER
  vdslLineConfDpboParamEscmb INTEGER
  vdslLineConfDpboParamEscmc INTEGER
  vdslLineConfDpboParamMus INTEGER
  vdslLineConfDpboParamFmin INTEGER
  vdslLineConfDpboParamFmax INTEGER
  vdslLineConfDpboParamPsdId INTEGER

VdslPortConfEntry  
SEQUENCE    
  vdslPortConfTlsEnable INTEGER
  vdslPortConfTlsVid VlanIndex
  vdslPortConfTlsPriority INTEGER
  vdslPortConfDtEnable INTEGER
  vdslPortConfDtSVid VlanIndex
  vdslPortConfDtSPriority INTEGER
  vdslPortConfDtCVid VlanIndex
  vdslPortConfDtCPriority INTEGER

VdslPortVlanTranslateEntry  
SEQUENCE    
  vdslPortVlanTranslateVpi INTEGER
  vdslPortVlanTranslateVci INTEGER
  vdslPortVlanTranslateCxvid VlanIndex
  vdslPortVlanTranslateCvid VlanIndex
  vdslPortVlanTranslateSvid VlanIndex
  vdslPortVlanTranslateDsonly INTEGER
  vdslPortVlanTranslateRowStatus RowStatus

VdslPortPvlanEntry  
SEQUENCE    
  vdslPortPvlanEtype Unsigned32
  vdslPortPvlanVid VlanIndex
  vdslPortPvlanPriority INTEGER
  vdslPortPvlanRowStatus RowStatus

VdslRfiCustomEntry  
SEQUENCE    
  vdslRfiCustomIndex INTEGER
  vdslRfiCustomStartFreq INTEGER
  vdslRfiCustomEndFreq INTEGER
  vdslRfiCustomEnable INTEGER

VdslLineConfUpboParamEntry  
SEQUENCE    
  vdslLineConfUpboParamBand INTEGER
  vdslLineConfUpboParamA INTEGER
  vdslLineConfUpboParamB INTEGER

VdslLineConfDpboEntry  
SEQUENCE    
  vdslLineConfDpboIndex INTEGER
  vdslLineConfDpboTone INTEGER
  vdslLineConfDpboPsd INTEGER

PvcEntry  
SEQUENCE    
  pvcVpi INTEGER
  pvcVci INTEGER
  pvcPvid VlanIndex
  pvcPriority INTEGER
  pvcProfile DisplayString
  pvcAuto INTEGER
  pvcEncap INTEGER
  pvcAcName DisplayString
  pvcServiceName DisplayString
  pvcHelloTime INTEGER
  pvcRowStatus RowStatus

PvcStateEntry  
SEQUENCE    
  pvcStateVpi INTEGER
  pvcStateVci INTEGER
  pvcStatePvid VlanIndex
  pvcStatePriority INTEGER
  pvcStateChannelType DisplayString
  pvcStateEncap DisplayString

RpvcGatewayEntry  
SEQUENCE    
  rpvcGatewayIp IpAddress
  rpvcGatewayVlanId VlanIndex
  rpvcGatewayRowStatus RowStatus
  rpvcGatewayPriority INTEGER

RpvcEntry  
SEQUENCE    
  rpvcVpi INTEGER
  rpvcVci INTEGER
  rpvcEncap INTEGER
  rpvcProfile DisplayString
  rpvcIp IpAddress
  rpvcNetmask IpAddress
  rpvcGatewayIpAddress IpAddress
  rpvcRowStatus RowStatus

RpvcRouteDomainEntry  
SEQUENCE    
  rpvcRouteDomainVpi INTEGER
  rpvcRouteDomainVci INTEGER
  rpvcRouteDomainIp IpAddress
  rpvcRouteDomainNetmask IpAddress
  rpvcRouteDomainRowStatus RowStatus

DsBcastDisableEntry  
SEQUENCE    
  dsBcastDisableVlanId INTEGER
  dsBcastDisableRowStatus RowStatus

PaepvcEntry  
SEQUENCE    
  paepvcVpi INTEGER
  paepvcVci INTEGER
  paepvcPvid VlanIndex
  paepvcEncap INTEGER
  paepvcPriority INTEGER
  paepvcProfile DisplayString
  paepvcAcName DisplayString
  paepvcServiceName DisplayString
  paepvcHelloTime INTEGER
  paepvcRowStatus RowStatus
  paepvcCvid VlanIndex
  paepvcCPriority INTEGER

TlspvcEntry  
SEQUENCE    
  tlspvcVpi INTEGER
  tlspvcVci INTEGER
  tlspvcSvid VlanIndex
  tlspvcEncap INTEGER
  tlspvcSpriority INTEGER
  tlspvcProfile DisplayString
  tlspvcRowStatus RowStatus

DtpvcEntry  
SEQUENCE    
  dtpvcVpi INTEGER
  dtpvcVci INTEGER
  dtpvcSvid VlanIndex
  dtpvcSpriority INTEGER
  dtpvcCvid VlanIndex
  dtpvcCpriority INTEGER
  dtpvcEncap INTEGER
  dtpvcProfile DisplayString
  dtpvcRowStatus RowStatus
  dtpvcAuto INTEGER
  dtpvcSuperChannel INTEGER
  dtpvcAcName DisplayString
  dtpvcServiceName DisplayString
  dtpvcHelloTime INTEGER

DtpvcStateEntry  
SEQUENCE    
  dtpvcStateVpi INTEGER
  dtpvcStateVci INTEGER
  dtpvcStateSvid VlanIndex
  dtpvcStateSPriority INTEGER
  dtpvcStateCvid VlanIndex
  dtpvcStateCPriority INTEGER
  dtpvcStateChannelType DisplayString
  dtpvcStateEncap DisplayString

SnrMarginEntry  
SEQUENCE    
  snrMgnMode INTEGER
  snrMgnUcTarget INTEGER
  snrMgnUcMax INTEGER
  snrMgnUcMin INTEGER
  snrMgnUcDownshift INTEGER
  snrMgnUcUpshift INTEGER
  snrMgnUrTarget INTEGER
  snrMgnUrMax INTEGER
  snrMgnUrMin INTEGER
  snrMgnUrDownshift INTEGER
  snrMgnUrUpshift INTEGER

DslRateEntry  
SEQUENCE    
  dslRateMode INTEGER
  dslRateLatencyMode INTEGER
  dslRateXtucMaxInterleaveDelay INTEGER
  dslRateXtucMaxTxRate Unsigned32
  dslRateXtucMinTxRate Unsigned32
  dslRateXturMaxInterleaveDelay INTEGER
  dslRateXturMaxTxRate Unsigned32
  dslRateXturMinTxRate Unsigned32

GbondGroupEntry  
SEQUENCE    
  gbondGroupName STRING
  gbondGroupPorts STRING
  gbondGroupUpRate Unsigned32
  gbondGroupDownRate Unsigned32
  gbondGroupRowStatus RowStatus

SraShiftMarginProfileEntry  
SEQUENCE    
  sraShiftMarginProfileName DisplayString
  xtucConfDownshiftSnrMgn INTEGER
  xtucConfUpshiftSnrMgn INTEGER
  xtucConfDownshiftTime INTEGER
  xtucConfUpshiftTime INTEGER
  xturConfDownshiftSnrMgn INTEGER
  xturConfUpshiftSnrMgn INTEGER
  xturConfDownshiftTime INTEGER
  xturConfUpshiftTime INTEGER
  sraShiftMarginProfileStatus RowStatus

IpqosProfileEntry  
SEQUENCE    
  ipqosProfileName DisplayString
  ipqosProfileNumOfQueue INTEGER
  ipqosProfileRowStatus RowStatus

IpqosProfileQueueEntry  
SEQUENCE    
  ipqosProfileQueueIndex INTEGER
  ipqosProfileQueuePIR INTEGER
  ipqosProfileQueueCIR INTEGER
  ipqosProfileQueuePBS INTEGER
  ipqosProfileQueueCBS INTEGER
  ipqosProfileQueueLevel INTEGER
  ipqosProfileQueueWeight INTEGER

Dot3adEntry  
SEQUENCE    
  dot3adGroupId INTEGER
  dot3adEnable INTEGER

PortTrunkingEntry  
SEQUENCE    
  portTrunkingGroupId INTEGER
  portTrunkingStatus INTEGER
  portTrunkingPortList PortList

DscpMappingEntry  
SEQUENCE    
  dscpSrcCodePoint INTEGER
  dscpMapPriority INTEGER

DscpPortEntry  
SEQUENCE    
  dscpStatusEnable INTEGER

VlanIsolationEntry  
SEQUENCE    
  vlanIsolationRowStatus INTEGER

CfmLoopbackPortEntry  
SEQUENCE    
  cfmLoopbackPortState INTEGER

CfmMIPEntry  
SEQUENCE    
  cfmPort INTEGER
  cfmMIPRowStatus RowStatus
  cfmMIPMacAddr PhysAddress

CfmLbrEntry  
SEQUENCE    
  cfmLbmIndex INTEGER
  cfmLbrIndex INTEGER
  cfmLbrSrcMac PhysAddress
  cfmLbrStatus INTEGER
  cfmLbrRtt INTEGER

DhcpRelay82Entry  
SEQUENCE    
  dhcpRelay82PrimaryServer IpAddress
  dhcpRelay82SecondaryServer IpAddress
  dhcpRelay82ActiveServer INTEGER
  dhcpRelay82Enable INTEGER
  dhcpRelay82Info DisplayString
  dhcpRelay82RelayMode INTEGER
  dhcpRelay82Suboption2Enable INTEGER
  dhcpRelay82Suboption2Info DisplayString
  dhcpRelay82EntryEnable INTEGER
  dhcpRelay82EntryOptionMode INTEGER
  dhcpRelay82VlanIp IpAddress
  dhcpRelay82VlanMask INTEGER
  dhcpRelay82VlanGateway IpAddress
  dhcpRelay82ThirdServer IpAddress
  dhcpRelay82FourthServer IpAddress
  dhcpRelay82FifthServer IpAddress
  dhcpRelay82ServerVid INTEGER

DhcpRelayArpShowEntry  
SEQUENCE    
  dhcpRelayArpShowVid INTEGER
  dhcpRelayArpShowIp IpAddress
  dhcpRelayArpShowMac PhysAddress

MacFilterPortEntry  
SEQUENCE    
  macFilterPortEnable INTEGER
  macFilterPortMacCount INTEGER
  macFilterPortFilterMode INTEGER

MacFilterEntry  
SEQUENCE    
  macFilterAddr PhysAddress
  macFilterRowStatus RowStatus

OuiFilterEntry  
SEQUENCE    
  ouiFilterAddr STRING
  ouiFilterRowStatus RowStatus

OuiFilterPortEntry  
SEQUENCE    
  ouiFilterPortEnable INTEGER
  ouiFilterPortFilterMode INTEGER

DhcpSnoopPortEntry  
SEQUENCE    
  dhcpSnoopEnable INTEGER
  dhcpSnoopMaxcnt INTEGER
  dhcpSnoopSmacverifyEnable INTEGER

DhcpStaticEntry  
SEQUENCE    
  dhcpStaticIpAddr IpAddress
  dhcpStaticRowStatus RowStatus

AclSetEntry  
SEQUENCE    
  aclSetVpi INTEGER
  aclSetVci INTEGER
  aclSetProfileName DisplayString
  aclSetRowStatus RowStatus

AclProfileEntry  
SEQUENCE    
  aclProfileRuleName DisplayString
  aclProfileRuleNumber INTEGER
  aclProfileActionNumber INTEGER
  aclProfileRuleParamMask INTEGER
  aclProfileRuleEtype INTEGER
  aclProfileRuleVid INTEGER
  aclProfileRuleSmac PhysAddress
  aclProfileRuleDmac PhysAddress
  aclProfileRulePriority INTEGER
  aclProfileRuleProtocol INTEGER
  aclProfileActionRate INTEGER
  aclProfileActionrvlan INTEGER
  aclProfileActionrpri INTEGER
  aclProfileRowStatus RowStatus
  aclProfileRuleSip IpAddress
  aclProfileRuleDip IpAddress
  aclProfileRuleSport INTEGER
  aclProfileRuleDport INTEGER

PppoeAgentEntry  
SEQUENCE    
  pppoeAgentEnable INTEGER
  pppoeAgentInfo DisplayString
  pppoeAgentRowStatus RowStatus
  pppoeAgentOptionMode INTEGER

N1macPortEntry  
SEQUENCE    
  n1macStatusEnable INTEGER

MacFfEntry  
SEQUENCE    
  macFfIndex INTEGER
  macFfVid INTEGER
  macFfArIP IpAddress
  macFfSrcIP IpAddress
  macFfSrcMask INTEGER
  macFfRowStatus RowStatus

MacFfVlanEntry  
SEQUENCE    
  macFfVlanRowstatus INTEGER

MacFfStaticIPEntry  
SEQUENCE    
  macFfStaticIPPort INTEGER
  macFfStaticIPVid INTEGER
  macFfstaticIP IpAddress
  macFfStaticIPMask INTEGER
  macFfStaticIPRowStatus RowStatus

MacFfServerMacEntry  
SEQUENCE    
  macFfServerMacVid INTEGER
  macFfServerMacAddr PhysAddress
  macFfServerMacRowStatus RowStatus

SecuredClientEntry  
SEQUENCE    
  securedClientIndex INTEGER
  securedClientStartIp IpAddress
  securedClientEndIp IpAddress
  securedClientService INTEGER
  securedClientEnable INTEGER

ExtAlarmEntry  
SEQUENCE    
  extAlarmIndex INTEGER
  extAlarmName STRING
  extAlarmStatus STRING
  extAlarmTriggeredMode INTEGER

UserEntry  
SEQUENCE    
  userName DisplayString
  userPassword DisplayString
  userPriviledge INTEGER
  userRowStatus RowStatus

DsQoSOverridingEntry  
SEQUENCE    
  dsQosPriority INTEGER
  dsQosValueList DisplayString

IgmpGroupEntry  
SEQUENCE    
  igmpGroupIp IpAddress
  igmpGroupvid INTEGER
  igmpGroupnumberOfMembers INTEGER
  igmpGroupMemberPorts PortList

IgmpGroupPortEntry  
SEQUENCE    
  igmpGroupPortIp IpAddress
  igmpGroupPortvid INTEGER

IgmpGroupV2Entry  
SEQUENCE    
  igmpGroupV2Vid VlanIndex
  igmpGroupV2Ip IpAddress
  igmpGroupV2NumOfMembers INTEGER
  igmpGroupV2MemberPorts PortList

IgmpGroupPortV2Entry  
SEQUENCE    
  igmpGroupPortV2Vid VlanIndex
  igmpGroupPortV2Ip IpAddress
  igmpGroupPortV2SourceIp IpAddress

IgmpPortCtrlPduEntry  
SEQUENCE    
  igmpPortCtrlPduQueryCnt Counter32
  igmpPortCtrlPduReportCnt Counter32
  igmpPortCtrlPduLeaveCnt Counter32
  igmpPortNumOfActiveGroups INTEGER
  igmpPortCtrlAuditLeaveCnt Counter32

VdslLineStatsEntry  
SEQUENCE    
  vdslLineStatsVtucBits1 STRING
  vdslLineStatsVtucBits2 STRING
  vdslLineStatsVtucBits3 STRING
  vdslLineStatsVtucBits4 STRING
  vdslLineStatsVturBits1 STRING
  vdslLineStatsVturBits2 STRING
  vdslLineStatsVturBits3 STRING
  vdslLineStatsVturBits4 STRING
  vdslLineStatsVtucGain1 STRING
  vdslLineStatsVtucGain2 STRING
  vdslLineStatsVtucGain3 STRING
  vdslLineStatsVtucGain4 STRING
  vdslLineStatsVtucGain5 STRING
  vdslLineStatsVtucGain6 STRING
  vdslLineStatsVtucGain7 STRING
  vdslLineStatsVtucGain8 STRING
  vdslLineStatsVturGain1 STRING
  vdslLineStatsVturGain2 STRING
  vdslLineStatsVturGain3 STRING
  vdslLineStatsVturGain4 STRING
  vdslLineStatsVturGain5 STRING
  vdslLineStatsVturGain6 STRING
  vdslLineStatsVturGain7 STRING
  vdslLineStatsVturGain8 STRING
  vdslLineStatsVtucHlog STRING
  vdslLineStatsVturHlog STRING
  vdslLineStatsVtucQln STRING
  vdslLineStatsVturQln STRING
  vdslLineStatsVtucSnr STRING
  vdslLineStatsVturSnr STRING
  vdslLineStatsVtucTssi STRING
  vdslLineStatsVturTssi STRING
  vdslLineStatsProtocol INTEGER

DhcpSnoopIpEntry  
SEQUENCE    
  dhcpSnoopIp IpAddress
  dhcpSnoopMac PhysAddress
  dhcpSnoopVid VlanIndex
  dhcpSnoopMask INTEGER
  dhcpSnoopGateway IpAddress
  dhcpSnoopRouteMap STRING

DhcpSnoopCounterEntry  
SEQUENCE    
  dhcpDiscovery Counter64
  dhcpOffer Counter64
  dhcpRequest Counter64
  dhcpAck Counter64
  dhcpAckBySnoopFull Counter64

DhcpRouteEntry  
SEQUENCE    
  dhcpRouteIndex INTEGER
  dhcpRouteVid VlanIndex
  dhcpRouteIP IpAddress
  dhcpRouteMask INTEGER
  dhcpRouteGwIP IpAddress

PaepvcSessionEntry  
SEQUENCE    
  paepvcSessionVpi INTEGER
  paepvcSessionVci INTEGER
  paepvcSessionState INTEGER
  paepvcSessionId INTEGER
  paepvcSessionUptime Unsigned32
  paepvcSessionacname DisplayString
  paepvcSessionsrvcname DisplayString

PaepvcCountEntry  
SEQUENCE    
  paepvcCountVpi INTEGER
  paepvcCountVci INTEGER
  paepvcCountPppLcpCfgReqRx Unsigned32
  paepvcCountPppLcpEchoReqRx Unsigned32
  paepvcCountPppLcpEchoReplyRx Unsigned32
  paepvcCountPadiTx Unsigned32
  paepvcCountPadoRx Unsigned32
  paepvcCountPadrTx Unsigned32
  paepvcCountPadsRx Unsigned32
  paepvcCountPadtTx Unsigned32
  paepvcCountPadtRx Unsigned32
  paepvcCountSrvcnameErrRx Unsigned32
  paepvcCountAcSystemErrRx Unsigned32
  paepvcCountGenericErrTx Unsigned32
  paepvcCountGenericErrRx Unsigned32

MacEntry  
SEQUENCE    
  macAddress MacAddress
  macPort INTEGER
  macStatus INTEGER
  macVid VlanIndex

N1macEntry  
SEQUENCE    
  n1macProtoVal Unsigned32
  n1macProtoType INTEGER
  n1macMacAddr MacAddress

EnetSfpInfoEntry  
SEQUENCE    
  enetSfpInfoTxpower INTEGER
  enetSfpInfoRxpower INTEGER
  enetSfpInfoTemperature INTEGER
  enetSfpInfoTxBias INTEGER
  enetSfpInfoVoltage INTEGER

MacFfStatsEntry  
SEQUENCE    
  macFfStatsIndex INTEGER
  macFfStatsVid VlanIndex
  macFfStatsArIP IpAddress
  macFfStatsSrcIP IpAddress
  macFfStatsSrcMask INTEGER

MacFfArpEntry  
SEQUENCE    
  macFfArpVid VlanIndex
  macFfArpIP IpAddress
  macFfArpPort INTEGER
  macFfArpMac PhysAddress

MacFfArpCounterEntry  
SEQUENCE    
  macFfArpCounterRequestTX Counter32
  macFfArpCounterRequestRX Counter32
  macFfArpCounterRequestRXDrop Counter32
  macFfArpCounterReplyTX Counter32
  macFfArpCounterReplyRX Counter32
  macFfArpCounterReplyRXDrop Counter32

AdslPortUtilEntry  
SEQUENCE    
  adslPortUtilTx INTEGER
  adslPortUtilRx INTEGER
  adslStatsXturInp DisplayString
  adslStatsXtucInp DisplayString

Defined Values

calixNetworks 1.1.6321
OBJECT IDENTIFIER    

calixRegistrations 1.1.6321.1
OBJECT IDENTIFIER    

calixProducts 1.1.6321.1.2
OBJECT IDENTIFIER    

e5x100 1.1.6321.1.2.3
OBJECT IDENTIFIER    

e5x120 1.1.6321.1.2.3.3
OBJECT IDENTIFIER    

alarmconf 1.1.6321.1.2.3.3.2
OBJECT IDENTIFIER    

diagnostic 1.1.6321.1.2.3.3.4
OBJECT IDENTIFIER    

multicast 1.1.6321.1.2.3.3.7
OBJECT IDENTIFIER    

port 1.1.6321.1.2.3.3.8
OBJECT IDENTIFIER    

profile 1.1.6321.1.2.3.3.9
OBJECT IDENTIFIER    

switch 1.1.6321.1.2.3.3.10
OBJECT IDENTIFIER    

sys 1.1.6321.1.2.3.3.11
OBJECT IDENTIFIER    

trap 1.1.6321.1.2.3.3.12
OBJECT IDENTIFIER    

statistics 1.1.6321.1.2.3.3.13
OBJECT IDENTIFIER    

clear 1.1.6321.1.2.3.3.14
OBJECT IDENTIFIER    

aesSeriesCommon 1.1.6321.1.2.3.3.97
OBJECT IDENTIFIER    

iesSeriesCommon 1.1.6321.1.2.3.3.98
OBJECT IDENTIFIER    

accessSwitchCommonATM 1.1.6321.1.2.3.3.99
OBJECT IDENTIFIER    

alarmOps 1.1.6321.1.2.3.3.2.1
The manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. The various bit positions are: BIT 1: clear BIT 2: cutoff
OBJECT-TYPE    
  INTEGER  

alarmConfTable 1.1.6321.1.2.3.3.2.2
This table includes alarm configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmConfEntry

alarmConfEntry 1.1.6321.1.2.3.3.2.2.1
An entry in alarmConfTable.
OBJECT-TYPE    
  AlarmConfEntry  

alarmConfId 1.1.6321.1.2.3.3.2.2.1.1
5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptAlm_input2 10009:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 30000:cfmError
OBJECT-TYPE    
  INTEGER  

alarmConfFacility 1.1.6321.1.2.3.3.2.2.1.2
Alarm facility.
OBJECT-TYPE    
  INTEGER local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), local7(7)  

alarmConfTarget 1.1.6321.1.2.3.3.2.2.1.3
The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
OBJECT-TYPE    
  INTEGER  

alarmConfSeverity 1.1.6321.1.2.3.3.2.2.1.4
Alarm severity
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), info(4)  

alarmConfClearable 1.1.6321.1.2.3.3.2.2.1.5
Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
OBJECT-TYPE    
  INTEGER clearable(1), unclearable(2)  

alarmCurrTable 1.1.6321.1.2.3.3.2.3
This table includes current alarm information.
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmCurrEntry

alarmCurrEntry 1.1.6321.1.2.3.3.2.3.1
An entry in alarmCurrTable.
OBJECT-TYPE    
  AlarmCurrEntry  

alarmCurrIndex 1.1.6321.1.2.3.3.2.3.1.1
Index of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrOccurTime 1.1.6321.1.2.3.3.2.3.1.2
Alarm occurence time (in hundredths of a second) since the system was last re-initialized.
OBJECT-TYPE    
  TimeTicks  

alarmCurrTrapOid 1.1.6321.1.2.3.3.2.3.1.3
Trap OID of the alarm.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

alarmCurrParam1 1.1.6321.1.2.3.3.2.3.1.4
The 1st parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam2 1.1.6321.1.2.3.3.2.3.1.5
The 2nd parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam3 1.1.6321.1.2.3.3.2.3.1.6
The 3rd parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam4 1.1.6321.1.2.3.3.2.3.1.7
The 4th parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam5 1.1.6321.1.2.3.3.2.3.1.8
The 5th parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam6 1.1.6321.1.2.3.3.2.3.1.9
The 6th parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam7 1.1.6321.1.2.3.3.2.3.1.10
The 7th parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrParam8 1.1.6321.1.2.3.3.2.3.1.11
The 8th parameter of the alarm.
OBJECT-TYPE    
  INTEGER  

alarmCurrTimeDescr 1.1.6321.1.2.3.3.2.3.1.12
The string representation of occurence time (YYYY/MM/DD HH:MM:SS).
OBJECT-TYPE    
  DisplayString  

alarmCurrSeverity 1.1.6321.1.2.3.3.2.3.1.13
The severity of the alarm.
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), info(4)  

alarmCurrDescr 1.1.6321.1.2.3.3.2.3.1.14
The description of the alarm.
OBJECT-TYPE    
  DisplayString  

alarmSeverityPortTable 1.1.6321.1.2.3.3.2.4
This table includes the configuration of alarm reporting severity threshold for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmSeverityPortEntry

alarmSeverityPortEntry 1.1.6321.1.2.3.3.2.4.1
An entry in alarmSeverityPortTable.
OBJECT-TYPE    
  AlarmSeverityPortEntry  

severityThresh 1.1.6321.1.2.3.3.2.4.1.1
The minimum alarm severity that is reported.
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), info(4)  

selt 1.1.6321.1.2.3.3.4.3
OBJECT IDENTIFIER    

ldm 1.1.6321.1.2.3.3.4.4
OBJECT IDENTIFIER    

seltTarget 1.1.6321.1.2.3.3.4.3.1
IfIndex of the port which would be performed single end loopback test.
OBJECT-TYPE    
  INTEGER  

seltOps 1.1.6321.1.2.3.3.4.3.2
The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
OBJECT-TYPE    
  INTEGER  

seltStatus 1.1.6321.1.2.3.3.4.3.3
Status description of the selt result.
OBJECT-TYPE    
  DisplayString  

seltCableType 1.1.6321.1.2.3.3.4.3.4
The cable type that selt result indicates.
OBJECT-TYPE    
  INTEGER awg24(1), awg26(2)  

seltLoopEstimateLengthFt 1.1.6321.1.2.3.3.4.3.5
The estimated loop length that selt result indicates.
OBJECT-TYPE    
  INTEGER  

seltLoopEstimateLengthMeter 1.1.6321.1.2.3.3.4.3.6
The estimated loop length that selt result indicates.
OBJECT-TYPE    
  INTEGER  

ldmTarget 1.1.6321.1.2.3.3.4.4.1
IfIndex of the port which would be performed ldm test.
OBJECT-TYPE    
  INTEGER  

ldmOps 1.1.6321.1.2.3.3.4.4.2
The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed.
OBJECT-TYPE    
  INTEGER  

ldmStatus 1.1.6321.1.2.3.3.4.4.3
Status description of ldm test result.
OBJECT-TYPE    
  DisplayString  

ldmXtucLoopAttenuation 1.1.6321.1.2.3.3.4.4.4
Loop Attenuation.
OBJECT-TYPE    
  INTEGER  

ldmXtucSignalAttenuation 1.1.6321.1.2.3.3.4.4.5
Signal Attenuation.
OBJECT-TYPE    
  INTEGER  

ldmXtucSignalMargin 1.1.6321.1.2.3.3.4.4.6
Signal Margin.
OBJECT-TYPE    
  INTEGER  

ldmXtucAggregateTxPower 1.1.6321.1.2.3.3.4.4.7
Actual Aggregate Transmit Power.
OBJECT-TYPE    
  INTEGER  

ldmXtucAttainableBitRate 1.1.6321.1.2.3.3.4.4.8
Attainable Bit Rate.
OBJECT-TYPE    
  Unsigned32  

ldmXturLoopAttenuation 1.1.6321.1.2.3.3.4.4.9
Loop Attenuation.
OBJECT-TYPE    
  INTEGER  

ldmXturSignalAttenuation 1.1.6321.1.2.3.3.4.4.10
Signal Attenuation.
OBJECT-TYPE    
  INTEGER  

ldmXturSignalMargin 1.1.6321.1.2.3.3.4.4.11
Signal Margin.
OBJECT-TYPE    
  INTEGER  

ldmXturAggregateTxPower 1.1.6321.1.2.3.3.4.4.12
Actual Aggregate Transmit Power.
OBJECT-TYPE    
  INTEGER  

ldmXturAttainableBitRate 1.1.6321.1.2.3.3.4.4.13
Attainable Bit Rate.
OBJECT-TYPE    
  Unsigned32  

ldmXtucNumOfSubcarriersPerPort 1.1.6321.1.2.3.3.4.4.14
The number of subcarriers per port for ATU-C.
OBJECT-TYPE    
  INTEGER  

ldmXturNumOfSubcarriersPerPort 1.1.6321.1.2.3.3.4.4.15
The number of subcarriers per port for ATU-R.
OBJECT-TYPE    
  INTEGER  

ldmXtucHlinScale 1.1.6321.1.2.3.3.4.4.16
Scale of Hlin.
OBJECT-TYPE    
  INTEGER  

ldmXtucHlinReal1 1.1.6321.1.2.3.3.4.4.17
The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlinReal2 1.1.6321.1.2.3.3.4.4.18
The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlinImage1 1.1.6321.1.2.3.3.4.4.19
The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlinImage2 1.1.6321.1.2.3.3.4.4.20
The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlog1 1.1.6321.1.2.3.3.4.4.21
The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlog2 1.1.6321.1.2.3.3.4.4.22
The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucQln1 1.1.6321.1.2.3.3.4.4.23
The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucQln2 1.1.6321.1.2.3.3.4.4.24
The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucSnr1 1.1.6321.1.2.3.3.4.4.25
The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucSnr2 1.1.6321.1.2.3.3.4.4.26
The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXturHlinScale 1.1.6321.1.2.3.3.4.4.27
Scale of Hlin.
OBJECT-TYPE    
  INTEGER  

ldmXturHlinReal 1.1.6321.1.2.3.3.4.4.28
Real part of Hlin. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXturHlinImage 1.1.6321.1.2.3.3.4.4.29
Image part of Hlin. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXturHlog 1.1.6321.1.2.3.3.4.4.30
Hlog of subcarrier. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXturQln 1.1.6321.1.2.3.3.4.4.31
QLN of subcarrier. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXturSnr 1.1.6321.1.2.3.3.4.4.32
SNR of subcarrier. Each subcarrier takes two octets to store the value.
OBJECT-TYPE    
  STRING  

ldmXtucHlogGroupFactor 1.1.6321.1.2.3.3.4.4.33
The Hlog group factor of ATU-C.
OBJECT-TYPE    
  STRING  

ldmXtucQlnGroupFactor 1.1.6321.1.2.3.3.4.4.34
The Qln group factor of ATU-C.
OBJECT-TYPE    
  STRING  

ldmXtucSnrGroupFactor 1.1.6321.1.2.3.3.4.4.35
The Snr group factor of ATU-C.
OBJECT-TYPE    
  STRING  

ldmXturHlogGroupFactor 1.1.6321.1.2.3.3.4.4.36
The Hlog group factor of ATU-R.
OBJECT-TYPE    
  STRING  

ldmXturQlnGroupFactor 1.1.6321.1.2.3.3.4.4.37
The Qln group factor of ATU-R.
OBJECT-TYPE    
  STRING  

ldmXturSnrGroupFactor 1.1.6321.1.2.3.3.4.4.38
The Snr group factor of ATU-R.
OBJECT-TYPE    
  STRING  

mcastBandwidth 1.1.6321.1.2.3.3.7.4
OBJECT IDENTIFIER    

igmpCount 1.1.6321.1.2.3.3.7.5
OBJECT IDENTIFIER    

mvlan 1.1.6321.1.2.3.3.7.6
OBJECT IDENTIFIER    

queryVid 1.1.6321.1.2.3.3.7.7
OBJECT IDENTIFIER    

igmpTimer 1.1.6321.1.2.3.3.7.11
OBJECT IDENTIFIER    

auditQuery 1.1.6321.1.2.3.3.7.12
OBJECT IDENTIFIER    

igmpProfile 1.1.6321.1.2.3.3.7.13
OBJECT IDENTIFIER    

igmpEnable 1.1.6321.1.2.3.3.7.1
Enable/disable IGMP protocol.
OBJECT-TYPE    
  INTEGER enableProxy(1), enableSnooping(2), disable(3)  

igmpVersion 1.1.6321.1.2.3.3.7.9
Setting IGMP version.
OBJECT-TYPE    
  INTEGER v2(1), v3(2)  

igmpLeaveMode 1.1.6321.1.2.3.3.7.10
Configure IGMP leave message handling mode.
OBJECT-TYPE    
  INTEGER immediateLeave(1), lastMemberQuery(2)  

mcastDefaultBandwidth 1.1.6321.1.2.3.3.7.4.1
Default bandwidth requirement for a multicast channel.
OBJECT-TYPE    
  INTEGER 1..100000  

maxNumOfMcastBw 1.1.6321.1.2.3.3.7.4.2
The maximum number of row entries that user can create in mcastBwTable.
OBJECT-TYPE    
  INTEGER  

mcastBwTable 1.1.6321.1.2.3.3.7.4.3
This table defines bandwidth budget for a range of multicast IP channels.
OBJECT-TYPE    
  SEQUENCE OF  
    McastBwEntry

mcastBwEntry 1.1.6321.1.2.3.3.7.4.3.1
An entry of mcastBwTable.
OBJECT-TYPE    
  McastBwEntry  

mcastBwIndex 1.1.6321.1.2.3.3.7.4.3.1.1
The index which specify the entry.
OBJECT-TYPE    
  INTEGER  

mcastBwStartIp 1.1.6321.1.2.3.3.7.4.3.1.2
The start multicast IP of the bandwidth control range.
OBJECT-TYPE    
  IpAddress  

mcastBwEndIp 1.1.6321.1.2.3.3.7.4.3.1.3
The end multicast IP of the bandwidth control range.
OBJECT-TYPE    
  IpAddress  

mcastBwBandwidth 1.1.6321.1.2.3.3.7.4.3.1.4
The bandwidth budget for the multicast IP channels.
OBJECT-TYPE    
  INTEGER  

mcastBwRowStatus 1.1.6321.1.2.3.3.7.4.3.1.5
The row status of the entry.
OBJECT-TYPE    
  RowStatus  

mcastBwPortTable 1.1.6321.1.2.3.3.7.4.4
This table specify the multicast bandwidth control of the port.
OBJECT-TYPE    
  SEQUENCE OF  
    McastBwPortEntry

mcastBwPortEntry 1.1.6321.1.2.3.3.7.4.4.1
An entry of mcastBwPortTable.
OBJECT-TYPE    
  McastBwPortEntry  

mcastBwPortEnable 1.1.6321.1.2.3.3.7.4.4.1.1
Enable/disable multicast bandwidth control for a port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mcastBwPortBandwidth 1.1.6321.1.2.3.3.7.4.4.1.2
Set bandwidth threshold for a port.
OBJECT-TYPE    
  INTEGER  

igmpCountPortTable 1.1.6321.1.2.3.3.7.5.1
This table specify the IGMP count limiting of the port.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpCountPortEntry

igmpCountPortEntry 1.1.6321.1.2.3.3.7.5.1.1
An entry of igmpCountPortTable.
OBJECT-TYPE    
  IgmpCountPortEntry  

igmpCountPortEnable 1.1.6321.1.2.3.3.7.5.1.1.1
Enable/disable IGMP count limiting for a port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpCountPortLimit 1.1.6321.1.2.3.3.7.5.1.1.2
The maximum allowed IGMP report count for a port.
OBJECT-TYPE    
  INTEGER 0..16  

maxNumOfMvlan 1.1.6321.1.2.3.3.7.6.1
The maximum number of row entries that user can create in mvlanTable.
OBJECT-TYPE    
  INTEGER  

mvlanTable 1.1.6321.1.2.3.3.7.6.2
A table containing static configuration information for each multicast VLAN configured into the device.
OBJECT-TYPE    
  SEQUENCE OF  
    MvlanEntry

mvlanEntry 1.1.6321.1.2.3.3.7.6.2.1
An entry of mvlanTable.
OBJECT-TYPE    
  MvlanEntry  

mvlanIndex 1.1.6321.1.2.3.3.7.6.2.1.1
The VLAN-ID refering to this VLAN.
OBJECT-TYPE    
  VlanIndex  

mvlanName 1.1.6321.1.2.3.3.7.6.2.1.2
An administratively assigned string, which may be used to identify the VLAN.
OBJECT-TYPE    
  DisplayString Size(0..31)  

mvlanEgressPorts 1.1.6321.1.2.3.3.7.6.2.1.3
The set of ports which are permanently assigned to the egress list for this multicast VLAN.
OBJECT-TYPE    
  PortList  

mvlanUntaggedPorts 1.1.6321.1.2.3.3.7.6.2.1.4
The set of ports which should transmit egress packets for this multicast VLAN as untagged.
OBJECT-TYPE    
  PortList  

mvlanRowStatus 1.1.6321.1.2.3.3.7.6.2.1.5
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

mvlanTranslateTable 1.1.6321.1.2.3.3.7.6.3
A table that contains multicast to VLAN translation.
OBJECT-TYPE    
  SEQUENCE OF  
    MvlanTranslateEntry

mvlanTranslateEntry 1.1.6321.1.2.3.3.7.6.3.1
An entry of mvlanTranslateTable.
OBJECT-TYPE    
  MvlanTranslateEntry  

mvlanTranslateIndex 1.1.6321.1.2.3.3.7.6.3.1.1
The index which specif the entry.
OBJECT-TYPE    
  INTEGER  

mvlanTranslateStartIp 1.1.6321.1.2.3.3.7.6.3.1.2
The start IP of the multicast VLAN translation.
OBJECT-TYPE    
  IpAddress  

mvlanTranslateEndIp 1.1.6321.1.2.3.3.7.6.3.1.3
The end IP of the multicast VLAN translation.
OBJECT-TYPE    
  IpAddress  

maxNumOfQryVid 1.1.6321.1.2.3.3.7.7.1
The maximum number of row entries that user can create in qryVidConfTable.
OBJECT-TYPE    
  INTEGER  

qryVidConfTable 1.1.6321.1.2.3.3.7.7.2
This table defines statically set VLANs used for response IGMP report.
OBJECT-TYPE    
  SEQUENCE OF  
    QryVidConfEntry

qryVidConfEntry 1.1.6321.1.2.3.3.7.7.2.1
An entry in qryVidConfTable.
OBJECT-TYPE    
  QryVidConfEntry  

qryVid 1.1.6321.1.2.3.3.7.7.2.1.1
VLAN ID.
OBJECT-TYPE    
  INTEGER  

qryVidRowStatus 1.1.6321.1.2.3.3.7.7.2.1.2
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

qryVidStatusTable 1.1.6321.1.2.3.3.7.7.3
This table shows statically set or dynamically learned VLANs used for response IGMP report.
OBJECT-TYPE    
  SEQUENCE OF  
    QryVidStatusEntry

qryVidStatusEntry 1.1.6321.1.2.3.3.7.7.3.1
An entry in qryVidStatusTable.
OBJECT-TYPE    
  QryVidStatusEntry  

qryVidType 1.1.6321.1.2.3.3.7.7.3.1.1
VLAN type.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

igmpQryInterval 1.1.6321.1.2.3.3.7.11.1
Set IGMP query interval, 10~1000 in seconds.
OBJECT-TYPE    
  INTEGER 10..1000  

igmpRobust 1.1.6321.1.2.3.3.7.11.2
Set IGMP query Robustness, 1~5.
OBJECT-TYPE    
  INTEGER 1..5  

igmpQryRespInterval 1.1.6321.1.2.3.3.7.11.3
Set IGMP query response interval, 1~100 in 100 milliseconds.
OBJECT-TYPE    
  INTEGER 1..100  

igmpLastMemQryInterval 1.1.6321.1.2.3.3.7.11.4
Set IGMP Last Member Query interval, 1~5 in 100 milliseconds.
OBJECT-TYPE    
  INTEGER 1..5  

igmpLastMemQryRobust 1.1.6321.1.2.3.3.7.11.5
Set Last Member Query Robustness, 1~5.
OBJECT-TYPE    
  INTEGER 1..5  

auditQryEnable 1.1.6321.1.2.3.3.7.12.1
Enable/disable IGMP audit query.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

auditQryInterval 1.1.6321.1.2.3.3.7.12.2
Set IGMP Audit Query Interval, 1~4 in 100 milliseconds.
OBJECT-TYPE    
  INTEGER 1..4  

auditQryRobust 1.1.6321.1.2.3.3.7.12.3
Set IGMP Audit Query Robustness, 1~5.
OBJECT-TYPE    
  INTEGER 1..5  

maxNumberOfIgmpProfiles 1.1.6321.1.2.3.3.7.13.1
The max number of IGMP profiles in the system.
OBJECT-TYPE    
  INTEGER  

igmpProfileTable 1.1.6321.1.2.3.3.7.13.2
A table that contains IGMP Profiles.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpProfileEntry

igmpProfileEntry 1.1.6321.1.2.3.3.7.13.2.1
The entry of IGMP Profile table.
OBJECT-TYPE    
  IgmpProfileEntry  

igmpProfileName 1.1.6321.1.2.3.3.7.13.2.1.1
The IGMP Profile name.
OBJECT-TYPE    
  DisplayString Size(1..31)  

igmpProfileEnable 1.1.6321.1.2.3.3.7.13.2.1.2
Enable/disable IGMP Profile.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpProfileMaxGroup 1.1.6321.1.2.3.3.7.13.2.1.3
Set maximum allowed multicast group, 1~64.
OBJECT-TYPE    
  INTEGER 1..64  

igmpProfileRowStatus 1.1.6321.1.2.3.3.7.13.2.1.4
The row status of the IGMP Profile entry.
OBJECT-TYPE    
  RowStatus  

igmpFilterTable 1.1.6321.1.2.3.3.7.13.3
A table that contains IGMP Filters.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFilterEntry

igmpFilterEntry 1.1.6321.1.2.3.3.7.13.3.1
The entry of IGMP Filter table.
OBJECT-TYPE    
  IgmpFilterEntry  

igmpFilterIndex 1.1.6321.1.2.3.3.7.13.3.1.1
The index which specifies the filter rule.
OBJECT-TYPE    
  INTEGER  

igmpFilterStartIp 1.1.6321.1.2.3.3.7.13.3.1.2
The start IP of the filter rule.
OBJECT-TYPE    
  IpAddress  

igmpFilterEndIp 1.1.6321.1.2.3.3.7.13.3.1.3
The end IP of the filter rule.
OBJECT-TYPE    
  IpAddress  

igmpProfilePortTable 1.1.6321.1.2.3.3.7.13.4
This table specifies the IGMP Profile of the port.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpProfilePortEntry

igmpProfilePortEntry 1.1.6321.1.2.3.3.7.13.4.1
An entry in igmpProfilePortTable.
OBJECT-TYPE    
  IgmpProfilePortEntry  

igmpProfilePortProfile 1.1.6321.1.2.3.3.7.13.4.1.1
The IGMP Profile of the port.
OBJECT-TYPE    
  STRING Size(1..31)  

vdslPort 1.1.6321.1.2.3.3.8.3
OBJECT IDENTIFIER    

pvc 1.1.6321.1.2.3.3.8.4
OBJECT IDENTIFIER    

rpvc 1.1.6321.1.2.3.3.8.8
OBJECT IDENTIFIER    

paepvc 1.1.6321.1.2.3.3.8.10
OBJECT IDENTIFIER    

tlspvc 1.1.6321.1.2.3.3.8.11
OBJECT IDENTIFIER    

dtpvc 1.1.6321.1.2.3.3.8.13
OBJECT IDENTIFIER    

snrMgn 1.1.6321.1.2.3.3.8.15
OBJECT IDENTIFIER    

dslRate 1.1.6321.1.2.3.3.8.16
OBJECT IDENTIFIER    

gbond 1.1.6321.1.2.3.3.8.51
OBJECT IDENTIFIER    

subrPortTable 1.1.6321.1.2.3.3.8.1
This table includes subscriber attributes for the port.
OBJECT-TYPE    
  SEQUENCE OF  
    SubrPortEntry

subrPortEntry 1.1.6321.1.2.3.3.8.1.1
An entry in subrPortTable.
OBJECT-TYPE    
  SubrPortEntry  

subrPortName 1.1.6321.1.2.3.3.8.1.1.1
Name of the subscriber.
OBJECT-TYPE    
  DisplayString Size(0..31)  

subrPortTel 1.1.6321.1.2.3.3.8.1.1.2
Telephone number of the subscriber.
OBJECT-TYPE    
  DisplayString Size(0..15)  

vdslLineConfTable 1.1.6321.1.2.3.3.8.3.1
This table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslLineConfEntry

vdslLineConfEntry 1.1.6321.1.2.3.3.8.3.1.1
An entry in vdslLineConfTable.
OBJECT-TYPE    
  VdslLineConfEntry  

vdslLineConfUpbo 1.1.6321.1.2.3.3.8.3.1.1.1
Enable/disable upstream power backoff control.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vdslLineConfVdslProfile 1.1.6321.1.2.3.3.8.3.1.1.2
Set VDSL profile.
OBJECT-TYPE    
  INTEGER vdsl8a(1), vdsl8b(2), vdsl8c(3), vdsl8d(4), vdsl12a(5), vdsl12b(6), vdsl17a(7), auto(8), adsl2plus(9), vdsl2(10), gdmt(11), glite(12), adsl2(13), t1413(14), vdsl2adsl2(15), vdsl2gdmt(16), vdsl2glite(17), vdsl2t1413(18)  

vdslLineConfRfiBand 1.1.6321.1.2.3.3.8.3.1.1.4
Set VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user needs to define customized RFI notch band through vdslRfiCustomTable
OBJECT-TYPE    
  INTEGER disable(1), ansi(2), etsi(3), custom(4)  

vdslLineConfIpqosProfile 1.1.6321.1.2.3.3.8.3.1.1.5
Tok_String
OBJECT-TYPE    
  DisplayString  

vdslLineConfVturInp 1.1.6321.1.2.3.3.8.3.1.1.6
VTUR minimum INP value
OBJECT-TYPE    
  INTEGER 0..160  

vdslLineConfVtucInp 1.1.6321.1.2.3.3.8.3.1.1.7
VTUC mimimum INT value
OBJECT-TYPE    
  INTEGER 0..160  

vdslLineConfOptionMask 1.1.6321.1.2.3.3.8.3.1.1.8
Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstream bitswaps Bit4: disable downstream bitwaps Bit5: disable upstream 1-bit constellation support Bit6: disable the transmit windowing in ADSL2+ mode Bit7: disable S=0.5 support in G.dmt Bit8: reserved Bit9: enable nitro Bit10: enable ADSL2 Annex L Bit11: enable ADSL2+ Annex M Bit12: enable US PTM optimization Bit13: enable DS PTM optimization Bit14: enable US PHYR Bit15: enable DS PHYR
OBJECT-TYPE    
  INTEGER  

vdslLineConfUpboForceLength 1.1.6321.1.2.3.3.8.3.1.1.9
-1 means max(kl0_CO,kl0_CPE). -2 means min(kl0_CO,kl0_CPE). -3 means kl0_CO. -4 means kl0_CPE. -5 means kl0_CPE + delta as calculated from.
OBJECT-TYPE    
  INTEGER -5..1270  

vdslLineConfPsdShape 1.1.6321.1.2.3.3.8.3.1.1.10
PSD mask type
OBJECT-TYPE    
  INTEGER vdsl2aNus0(1), vdsl2aEu32(2), vdsl2aEu36(3), vdsl2aEu40(4), vdsl2aEu44(5), vdsl2aEu48(6), vdsl2aEu52(7), vdsl2aEu56(8), vdsl2aEu60(9), vdsl2aEu64(10), vdsl2aEu128(11), vdsl1fttexAnsiM1(12), vdsl1fttexAnsiM2(13), vdsl1fttcabAnsiM1(14), vdsl1fttcabAnsiM2(15), vdsl1fttexAnsiM1E(16), vdsl1fttexAnsiM2E(17), vdslFttcabAnsiM1E(18), vdslFttcabAnsiM2E(19), vdsl2aCt(20), vdsl2b8x1(21), vdsl2b8x2(22), vdsl2b8x3(23), vdsl2b8x4(24), vdsl2b8x5(25), vdsl2b8x6(26), vdsl2b8x7(27), vdsl2b8x8(28), vdsl2b8x9(29), vdsl2b8x10(30), vdsl2b8x11(31), vdsl2b8x12(32), vdsl2b8x13(33), vdsl2b8x14(34), vdsl2b8x15(35), vdsl2b8x16(36), vdsl2b7x1(37), vdsl2b7x2(38), vdsl2b7x3(39), vdsl2b7x4(40), vdsl2b7x5(41), vdsl2b7x6(42), vdsl2b7x7(43), vdsl2b7x8(44), vdsl2b7x9(45), vdsl2b7x10(46), vdsl2btAnfp(47), vdsl2c138b(48), vdsl2c276b(49), vdsl2c138co(50), vdsl2c276co(51), vdsl2cTcmisdn(52), vdsl1QAMCompatible(53)  

vdslLineConfDpbo 1.1.6321.1.2.3.3.8.3.1.1.11
Enable/Disable DPBO
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vdslLineConfDpboParamEsel 1.1.6321.1.2.3.3.8.3.1.1.12
DPBO ESEL parameter
OBJECT-TYPE    
  INTEGER 0..511  

vdslLineConfDpboParamEscma 1.1.6321.1.2.3.3.8.3.1.1.13
DPBO ESCMA parameter -1~1.5 in step of 1/256.
OBJECT-TYPE    
  INTEGER 0..640  

vdslLineConfDpboParamEscmb 1.1.6321.1.2.3.3.8.3.1.1.14
DPBO ESCMB parameter -1~1.5 in step of 1/256.
OBJECT-TYPE    
  INTEGER 0..640  

vdslLineConfDpboParamEscmc 1.1.6321.1.2.3.3.8.3.1.1.15
DPBO ESCMC parameter -1~1.5 in step of 1/256.
OBJECT-TYPE    
  INTEGER 0..640  

vdslLineConfDpboParamMus 1.1.6321.1.2.3.3.8.3.1.1.16
DPBO MUS parameter.
OBJECT-TYPE    
  INTEGER 0..255  

vdslLineConfDpboParamFmin 1.1.6321.1.2.3.3.8.3.1.1.17
DPBO FMIN parameter
OBJECT-TYPE    
  INTEGER 0..2048  

vdslLineConfDpboParamFmax 1.1.6321.1.2.3.3.8.3.1.1.18
DPBO FMAX parameter
OBJECT-TYPE    
  INTEGER 32..6956  

vdslLineConfDpboParamPsdId 1.1.6321.1.2.3.3.8.3.1.1.19
Valid range for setting is 1~6.
OBJECT-TYPE    
  INTEGER unknown(0), psdCo(1), psdFlat(2), psdCabAnsi(3), psdCabEtsi(4), psdExchEtsi(5), psdExchAnsi(6)  

vdslVlan 1.1.6321.1.2.3.3.8.3.2
OBJECT IDENTIFIER    

vdslPortConfTable 1.1.6321.1.2.3.3.8.3.2.1
This table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslPortConfEntry

vdslPortConfEntry 1.1.6321.1.2.3.3.8.3.2.1.1
An entry in vdslPortConfTable.
OBJECT-TYPE    
  VdslPortConfEntry  

vdslPortConfTlsEnable 1.1.6321.1.2.3.3.8.3.2.1.1.4
Enable/disable the transparent LAN service.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vdslPortConfTlsVid 1.1.6321.1.2.3.3.8.3.2.1.1.5
The transparent LAN service s-tag VID.
OBJECT-TYPE    
  VlanIndex  

vdslPortConfTlsPriority 1.1.6321.1.2.3.3.8.3.2.1.1.6
The transparent LAN service s-tag priority.
OBJECT-TYPE    
  INTEGER  

vdslPortConfDtEnable 1.1.6321.1.2.3.3.8.3.2.1.1.7
Enable/disable the Double Tagging service.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vdslPortConfDtSVid 1.1.6321.1.2.3.3.8.3.2.1.1.8
The Double Tagging service s-tag VID.
OBJECT-TYPE    
  VlanIndex  

vdslPortConfDtSPriority 1.1.6321.1.2.3.3.8.3.2.1.1.9
The Double Tagging service s-tag priority.
OBJECT-TYPE    
  INTEGER  

vdslPortConfDtCVid 1.1.6321.1.2.3.3.8.3.2.1.1.10
The Double Tagging service c-tag VID.
OBJECT-TYPE    
  VlanIndex  

vdslPortConfDtCPriority 1.1.6321.1.2.3.3.8.3.2.1.1.11
The Double Tagging service c-tag priority.
OBJECT-TYPE    
  INTEGER  

vdslPortVlanTranslateTable 1.1.6321.1.2.3.3.8.3.2.2
A table that contains VLAN translation.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslPortVlanTranslateEntry

vdslPortVlanTranslateEntry 1.1.6321.1.2.3.3.8.3.2.2.1
An entry in vdslPortVlanTranslateTable.
OBJECT-TYPE    
  VdslPortVlanTranslateEntry  

vdslPortVlanTranslateVpi 1.1.6321.1.2.3.3.8.3.2.2.1.1
VPI of the vtt.
OBJECT-TYPE    
  INTEGER 0..255  

vdslPortVlanTranslateVci 1.1.6321.1.2.3.3.8.3.2.2.1.2
VCI of the vtt.
OBJECT-TYPE    
  INTEGER 1..255  

vdslPortVlanTranslateCxvid 1.1.6321.1.2.3.3.8.3.2.2.1.3
CXVID of the vtt.
OBJECT-TYPE    
  VlanIndex  

vdslPortVlanTranslateCvid 1.1.6321.1.2.3.3.8.3.2.2.1.4
CVID of the vtt.
OBJECT-TYPE    
  VlanIndex  

vdslPortVlanTranslateSvid 1.1.6321.1.2.3.3.8.3.2.2.1.5
SVID of the vtt.
OBJECT-TYPE    
  VlanIndex  

vdslPortVlanTranslateDsonly 1.1.6321.1.2.3.3.8.3.2.2.1.6
Donwstream direction only of the vtt.
OBJECT-TYPE    
  INTEGER 1..2  

vdslPortVlanTranslateRowStatus 1.1.6321.1.2.3.3.8.3.2.2.1.7
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

vdslPortPvlanTable 1.1.6321.1.2.3.3.8.3.2.4
Protocol VLAN configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslPortPvlanEntry

vdslPortPvlanEntry 1.1.6321.1.2.3.3.8.3.2.4.1
An entry in vdslPortPvlanTable.
OBJECT-TYPE    
  VdslPortPvlanEntry  

vdslPortPvlanEtype 1.1.6321.1.2.3.3.8.3.2.4.1.1
0~0xffff.
OBJECT-TYPE    
  Unsigned32  

vdslPortPvlanVid 1.1.6321.1.2.3.3.8.3.2.4.1.2
Tok_String
OBJECT-TYPE    
  VlanIndex  

vdslPortPvlanPriority 1.1.6321.1.2.3.3.8.3.2.4.1.3
Tok_String
OBJECT-TYPE    
  INTEGER 0..7  

vdslPortPvlanRowStatus 1.1.6321.1.2.3.3.8.3.2.4.1.4
Tok_String
OBJECT-TYPE    
  RowStatus  

vdslRfiCustomTable 1.1.6321.1.2.3.3.8.3.3
This table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslRfiCustomEntry

vdslRfiCustomEntry 1.1.6321.1.2.3.3.8.3.3.1
An entry in vdslRfiCustomTable.
OBJECT-TYPE    
  VdslRfiCustomEntry  

vdslRfiCustomIndex 1.1.6321.1.2.3.3.8.3.3.1.1
Index of the table.
OBJECT-TYPE    
  INTEGER  

vdslRfiCustomStartFreq 1.1.6321.1.2.3.3.8.3.3.1.2
The start value of the customized frequency range.
OBJECT-TYPE    
  INTEGER  

vdslRfiCustomEndFreq 1.1.6321.1.2.3.3.8.3.3.1.3
The end value of the customized frequency range.
OBJECT-TYPE    
  INTEGER  

vdslRfiCustomEnable 1.1.6321.1.2.3.3.8.3.3.1.4
Enable or disable the customized frequency range setting.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vdslLineConfUpboParamTable 1.1.6321.1.2.3.3.8.3.4
This table includes VDSL UPBO configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslLineConfUpboParamEntry

vdslLineConfUpboParamEntry 1.1.6321.1.2.3.3.8.3.4.1
An entry in vdslLineConfUpboParamTable.
OBJECT-TYPE    
  VdslLineConfUpboParamEntry  

vdslLineConfUpboParamBand 1.1.6321.1.2.3.3.8.3.4.1.1
Index of the table.
OBJECT-TYPE    
  INTEGER  

vdslLineConfUpboParamA 1.1.6321.1.2.3.3.8.3.4.1.2
Tok_String
OBJECT-TYPE    
  INTEGER 4000..8095  

vdslLineConfUpboParamB 1.1.6321.1.2.3.3.8.3.4.1.3
Tok_String
OBJECT-TYPE    
  INTEGER 0..4095  

vdslLineConfDpboTable 1.1.6321.1.2.3.3.8.3.5
This table includes VDSL DPBO configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslLineConfDpboEntry

vdslLineConfDpboEntry 1.1.6321.1.2.3.3.8.3.5.1
An entry in vdslLineConfDpboTable.
OBJECT-TYPE    
  VdslLineConfDpboEntry  

vdslLineConfDpboIndex 1.1.6321.1.2.3.3.8.3.5.1.1
Index of the table.
OBJECT-TYPE    
  INTEGER  

vdslLineConfDpboTone 1.1.6321.1.2.3.3.8.3.5.1.2
Tok_String
OBJECT-TYPE    
  INTEGER 1..512  

vdslLineConfDpboPsd 1.1.6321.1.2.3.3.8.3.5.1.3
Tok_String
OBJECT-TYPE    
  INTEGER 0..255  

maxNumOfPvcs 1.1.6321.1.2.3.3.8.4.1
The maximum number of PVCs which could be created on a port.
OBJECT-TYPE    
  INTEGER  

pvcTable 1.1.6321.1.2.3.3.8.4.2
This table includes PVC configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    PvcEntry

pvcEntry 1.1.6321.1.2.3.3.8.4.2.1
An entry in pvcTable.
OBJECT-TYPE    
  PvcEntry  

pvcVpi 1.1.6321.1.2.3.3.8.4.2.1.1
VPI of the pvc.
OBJECT-TYPE    
  INTEGER 0..255  

pvcVci 1.1.6321.1.2.3.3.8.4.2.1.2
VCI of the pvc.
OBJECT-TYPE    
  INTEGER 1..65535  

pvcPvid 1.1.6321.1.2.3.3.8.4.2.1.3
Default VID of the pvc.
OBJECT-TYPE    
  VlanIndex  

pvcPriority 1.1.6321.1.2.3.3.8.4.2.1.5
802.1p default priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

pvcProfile 1.1.6321.1.2.3.3.8.4.2.1.6
The value of this object identifies the row in the ipqosProfileTable.
OBJECT-TYPE    
  DisplayString Size(1..31)  

pvcAuto 1.1.6321.1.2.3.3.8.4.2.1.14
Enable/disable auto detection for PPPoE/PPPoA encapsulation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pvcEncap 1.1.6321.1.2.3.3.8.4.2.1.7
Encapsulation of the pvc.
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

pvcRowStatus 1.1.6321.1.2.3.3.8.4.2.1.8
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

pvcAcName 1.1.6321.1.2.3.3.8.4.2.1.11
Access concentrator name for paepvc.
OBJECT-TYPE    
  DisplayString  

pvcServiceName 1.1.6321.1.2.3.3.8.4.2.1.12
Service name for paepvc.
OBJECT-TYPE    
  DisplayString  

pvcHelloTime 1.1.6321.1.2.3.3.8.4.2.1.13
The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
OBJECT-TYPE    
  INTEGER  

pvcStateTable 1.1.6321.1.2.3.3.8.4.3
This table show current PVC status.
OBJECT-TYPE    
  SEQUENCE OF  
    PvcStateEntry

pvcStateEntry 1.1.6321.1.2.3.3.8.4.3.1
An entry in pvcStateTable.
OBJECT-TYPE    
  PvcStateEntry  

pvcStateVpi 1.1.6321.1.2.3.3.8.4.3.1.1
VPI of the pvc.
OBJECT-TYPE    
  INTEGER 0..255  

pvcStateVci 1.1.6321.1.2.3.3.8.4.3.1.2
VCI of the pvc.
OBJECT-TYPE    
  INTEGER 1..65535  

pvcStatePvid 1.1.6321.1.2.3.3.8.4.3.1.3
Default VID of the pvc.
OBJECT-TYPE    
  VlanIndex  

pvcStatePriority 1.1.6321.1.2.3.3.8.4.3.1.4
802.1p default priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

pvcStateChannelType 1.1.6321.1.2.3.3.8.4.3.1.8
The value of this object identifies the channel type at runtime.
OBJECT-TYPE    
  DisplayString Size(1..31)  

pvcStateEncap 1.1.6321.1.2.3.3.8.4.3.1.9
The value of this object identifies the channel encapsulation at runtime.
OBJECT-TYPE    
  DisplayString Size(1..31)  

rpvcGatewayTable 1.1.6321.1.2.3.3.8.8.1
This table includes Routed Gateway configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    RpvcGatewayEntry

rpvcGatewayEntry 1.1.6321.1.2.3.3.8.8.1.1
An entry in Routed Gateway table.
OBJECT-TYPE    
  RpvcGatewayEntry  

rpvcGatewayIp 1.1.6321.1.2.3.3.8.8.1.1.1
IP of RPVC gateway.
OBJECT-TYPE    
  IpAddress  

rpvcGatewayVlanId 1.1.6321.1.2.3.3.8.8.1.1.2
Vlan id send to this RPVC gateway.
OBJECT-TYPE    
  VlanIndex  

rpvcGatewayRowStatus 1.1.6321.1.2.3.3.8.8.1.1.3
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

rpvcGatewayPriority 1.1.6321.1.2.3.3.8.8.1.1.4
802.1p p bit send to this RPVC gateway.
OBJECT-TYPE    
  INTEGER  

rpvcTable 1.1.6321.1.2.3.3.8.8.2
This table includes RPVC configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    RpvcEntry

rpvcEntry 1.1.6321.1.2.3.3.8.8.2.1
An entry in rpvcTable.
OBJECT-TYPE    
  RpvcEntry  

rpvcVpi 1.1.6321.1.2.3.3.8.8.2.1.1
VPI of the rpvc.
OBJECT-TYPE    
  INTEGER 0..255  

rpvcVci 1.1.6321.1.2.3.3.8.8.2.1.2
VCI of the rpvc.
OBJECT-TYPE    
  INTEGER 1..65535  

rpvcEncap 1.1.6321.1.2.3.3.8.8.2.1.3
Encapsulation of the rpvc.
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

rpvcProfile 1.1.6321.1.2.3.3.8.8.2.1.4
The ipqos profile of the rpvc.
OBJECT-TYPE    
  DisplayString Size(1..31)  

rpvcIp 1.1.6321.1.2.3.3.8.8.2.1.5
The IP of the rpvc.
OBJECT-TYPE    
  IpAddress  

rpvcNetmask 1.1.6321.1.2.3.3.8.8.2.1.6
The IP mask of the rpvc IP.
OBJECT-TYPE    
  IpAddress  

rpvcGatewayIpAddress 1.1.6321.1.2.3.3.8.8.2.1.7
The gateway IP of rpvc.
OBJECT-TYPE    
  IpAddress  

rpvcRowStatus 1.1.6321.1.2.3.3.8.8.2.1.8
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

rpvcRouteDomainTable 1.1.6321.1.2.3.3.8.8.3
This table includes RPVC route domain configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    RpvcRouteDomainEntry

rpvcRouteDomainEntry 1.1.6321.1.2.3.3.8.8.3.1
An entry in rpvcRouteDomainTable.
OBJECT-TYPE    
  RpvcRouteDomainEntry  

rpvcRouteDomainVpi 1.1.6321.1.2.3.3.8.8.3.1.1
VPI of the rpvc.
OBJECT-TYPE    
  INTEGER 0..255  

rpvcRouteDomainVci 1.1.6321.1.2.3.3.8.8.3.1.2
VCI of the rpvc.
OBJECT-TYPE    
  INTEGER 1..65535  

rpvcRouteDomainIp 1.1.6321.1.2.3.3.8.8.3.1.3
The route domain IP.
OBJECT-TYPE    
  IpAddress  

rpvcRouteDomainNetmask 1.1.6321.1.2.3.3.8.8.3.1.4
The IP mask of the route domain IP.
OBJECT-TYPE    
  IpAddress  

rpvcRouteDomainRowStatus 1.1.6321.1.2.3.3.8.8.3.1.5
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

rpvcArpAgingTime 1.1.6321.1.2.3.3.8.8.4
Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
OBJECT-TYPE    
  INTEGER  

rpvcArpFlush 1.1.6321.1.2.3.3.8.8.5
Flush the RPVC ARP proxy table.
OBJECT-TYPE    
  INTEGER enable(1)  

dsBcastDisableTable 1.1.6321.1.2.3.3.8.9
This table includes Down Stream Bcast configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    DsBcastDisableEntry

dsBcastDisableEntry 1.1.6321.1.2.3.3.8.9.1
An entry in Down Stream Bcast table.
OBJECT-TYPE    
  DsBcastDisableEntry  

dsBcastDisableVlanId 1.1.6321.1.2.3.3.8.9.1.1
downstream broadcast disabled vid.
OBJECT-TYPE    
  INTEGER  

dsBcastDisableRowStatus 1.1.6321.1.2.3.3.8.9.1.2
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

paepvcTable 1.1.6321.1.2.3.3.8.10.1
This table includes PPPoAoE PVC configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    PaepvcEntry

paepvcEntry 1.1.6321.1.2.3.3.8.10.1.1
An entry of paepvcTable.
OBJECT-TYPE    
  PaepvcEntry  

paepvcVpi 1.1.6321.1.2.3.3.8.10.1.1.1
VPI of the pvc.
OBJECT-TYPE    
  INTEGER 0..255  

paepvcVci 1.1.6321.1.2.3.3.8.10.1.1.2
VCI of the pvc.
OBJECT-TYPE    
  INTEGER 1..65535  

paepvcPvid 1.1.6321.1.2.3.3.8.10.1.1.3
Default VID of the pvc.
OBJECT-TYPE    
  VlanIndex  

paepvcEncap 1.1.6321.1.2.3.3.8.10.1.1.4
Encapsulation of the paepvc.
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

paepvcPriority 1.1.6321.1.2.3.3.8.10.1.1.5
802.1p default priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

paepvcProfile 1.1.6321.1.2.3.3.8.10.1.1.6
The value of this object identifies the row in the ipqosProfileTable.
OBJECT-TYPE    
  DisplayString Size(1..31)  

paepvcAcName 1.1.6321.1.2.3.3.8.10.1.1.7
Access concentrator name.
OBJECT-TYPE    
  DisplayString  

paepvcServiceName 1.1.6321.1.2.3.3.8.10.1.1.8
Service name.
OBJECT-TYPE    
  DisplayString  

paepvcHelloTime 1.1.6321.1.2.3.3.8.10.1.1.9
The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
OBJECT-TYPE    
  INTEGER  

paepvcRowStatus 1.1.6321.1.2.3.3.8.10.1.1.10
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

paepvcCvid 1.1.6321.1.2.3.3.8.10.1.1.12
Default C-VID of the pvc.
OBJECT-TYPE    
  VlanIndex  

paepvcCPriority 1.1.6321.1.2.3.3.8.10.1.1.13
802.1p default C-priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

tlspvcTable 1.1.6321.1.2.3.3.8.11.1
This table includes Transparent LAN Service (TLS) PVC configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    TlspvcEntry

tlspvcEntry 1.1.6321.1.2.3.3.8.11.1.1
An entry of tlspvcTable.
OBJECT-TYPE    
  TlspvcEntry  

tlspvcVpi 1.1.6321.1.2.3.3.8.11.1.1.1
VPI of the pvc.
OBJECT-TYPE    
  INTEGER 0..255  

tlspvcVci 1.1.6321.1.2.3.3.8.11.1.1.2
VCI of the pvc.
OBJECT-TYPE    
  INTEGER 1..65535  

tlspvcSvid 1.1.6321.1.2.3.3.8.11.1.1.3
s-tag VLAN ID of the pvc.
OBJECT-TYPE    
  VlanIndex  

tlspvcEncap 1.1.6321.1.2.3.3.8.11.1.1.4
Encapsulation of the tlspvc.
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

tlspvcSpriority 1.1.6321.1.2.3.3.8.11.1.1.5
s-tag priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

tlspvcProfile 1.1.6321.1.2.3.3.8.11.1.1.6
The value of this object identifies the row in the ipqosProfileTable.
OBJECT-TYPE    
  DisplayString Size(1..31)  

tlspvcRowStatus 1.1.6321.1.2.3.3.8.11.1.1.7
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

dtpvcTable 1.1.6321.1.2.3.3.8.13.1
This table includes Double Tagging (DT) PVC configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    DtpvcEntry

dtpvcEntry 1.1.6321.1.2.3.3.8.13.1.1
An entry of dtpvcTable.
OBJECT-TYPE    
  DtpvcEntry  

dtpvcVpi 1.1.6321.1.2.3.3.8.13.1.1.1
VPI of the pvc.
OBJECT-TYPE    
  INTEGER 0..255  

dtpvcVci 1.1.6321.1.2.3.3.8.13.1.1.2
VCI of the pvc.
OBJECT-TYPE    
  INTEGER 1..65535  

dtpvcSvid 1.1.6321.1.2.3.3.8.13.1.1.3
s-tag VLAN ID of the pvc.
OBJECT-TYPE    
  VlanIndex  

dtpvcSpriority 1.1.6321.1.2.3.3.8.13.1.1.4
s-tag priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

dtpvcCvid 1.1.6321.1.2.3.3.8.13.1.1.5
c-tag VLAN ID of the pvc.
OBJECT-TYPE    
  VlanIndex  

dtpvcCpriority 1.1.6321.1.2.3.3.8.13.1.1.6
c-tag priority of the pvc.
OBJECT-TYPE    
  INTEGER 0..7  

dtpvcEncap 1.1.6321.1.2.3.3.8.13.1.1.7
Encapsulation of the dtpvc.
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

dtpvcProfile 1.1.6321.1.2.3.3.8.13.1.1.8
The value of this object identifies the row in the ipqosProfileTable.
OBJECT-TYPE    
  DisplayString Size(1..31)  

dtpvcRowStatus 1.1.6321.1.2.3.3.8.13.1.1.9
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

dtpvcAuto 1.1.6321.1.2.3.3.8.13.1.1.14
Enable/disable auto detection for PPPoE/PPPoA encapsulation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dtpvcSuperChannel 1.1.6321.1.2.3.3.8.13.1.1.10
Specified the configured DTPVC is a super channel.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dtpvcAcName 1.1.6321.1.2.3.3.8.13.1.1.11
Access concentrator name for paepvc.
OBJECT-TYPE    
  DisplayString  

dtpvcServiceName 1.1.6321.1.2.3.3.8.13.1.1.12
Service name for paepvc.
OBJECT-TYPE    
  DisplayString  

dtpvcHelloTime 1.1.6321.1.2.3.3.8.13.1.1.13
The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
OBJECT-TYPE    
  INTEGER  

dtpvcStateTable 1.1.6321.1.2.3.3.8.13.2
This table show current DTPVC status.
OBJECT-TYPE    
  SEQUENCE OF  
    DtpvcStateEntry

dtpvcStateEntry 1.1.6321.1.2.3.3.8.13.2.1
An entry in dtpvcStateTable.
OBJECT-TYPE    
  DtpvcStateEntry  

dtpvcStateVpi 1.1.6321.1.2.3.3.8.13.2.1.1
VPI of the dtpvc.
OBJECT-TYPE    
  INTEGER 0..255  

dtpvcStateVci 1.1.6321.1.2.3.3.8.13.2.1.2
VCI of the dtpvc.
OBJECT-TYPE    
  INTEGER 1..65535  

dtpvcStateSvid 1.1.6321.1.2.3.3.8.13.2.1.3
Default S-VID of the dtpvc.
OBJECT-TYPE    
  VlanIndex  

dtpvcStateSPriority 1.1.6321.1.2.3.3.8.13.2.1.4
S-priority of the dtpvc.
OBJECT-TYPE    
  INTEGER 0..7  

dtpvcStateCvid 1.1.6321.1.2.3.3.8.13.2.1.5
Default C-VID of the dtpvc.
OBJECT-TYPE    
  VlanIndex  

dtpvcStateCPriority 1.1.6321.1.2.3.3.8.13.2.1.6
C-priority of the dtpvc.
OBJECT-TYPE    
  INTEGER 0..7  

dtpvcStateChannelType 1.1.6321.1.2.3.3.8.13.2.1.8
The value of this object identifies the channel type at runtime.
OBJECT-TYPE    
  DisplayString Size(1..31)  

dtpvcStateEncap 1.1.6321.1.2.3.3.8.13.2.1.9
The value of this object identifies the channel encapsulation at runtime.
OBJECT-TYPE    
  DisplayString Size(1..31)  

snrMgnTable 1.1.6321.1.2.3.3.8.15.1
A table containing the per port SNR Margin configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    SnrMarginEntry

snrMgnEntry 1.1.6321.1.2.3.3.8.15.1.1
An entry of snrMgnTable.
OBJECT-TYPE    
  SnrMarginEntry  

snrMgnMode 1.1.6321.1.2.3.3.8.15.1.1.1
Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration.
OBJECT-TYPE    
  INTEGER profile(0), line(1)  

snrMgnUcTarget 1.1.6321.1.2.3.3.8.15.1.1.2
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUcMax 1.1.6321.1.2.3.3.8.15.1.1.3
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUcMin 1.1.6321.1.2.3.3.8.15.1.1.4
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUcDownshift 1.1.6321.1.2.3.3.8.15.1.1.5
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUcUpshift 1.1.6321.1.2.3.3.8.15.1.1.6
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUrTarget 1.1.6321.1.2.3.3.8.15.1.1.7
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUrMax 1.1.6321.1.2.3.3.8.15.1.1.8
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUrMin 1.1.6321.1.2.3.3.8.15.1.1.9
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUrDownshift 1.1.6321.1.2.3.3.8.15.1.1.10
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
OBJECT-TYPE    
  INTEGER 0..310  

snrMgnUrUpshift 1.1.6321.1.2.3.3.8.15.1.1.11
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
OBJECT-TYPE    
  INTEGER 0..310  

dslRateTable 1.1.6321.1.2.3.3.8.16.1
A table containing the per port DSL Rate configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    DslRateEntry

dslRateEntry 1.1.6321.1.2.3.3.8.16.1.1
An entry of dslRateTable.
OBJECT-TYPE    
  DslRateEntry  

dslRateMode 1.1.6321.1.2.3.3.8.16.1.1.1
Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration.
OBJECT-TYPE    
  INTEGER profile(0), line(1)  

dslRateLatencyMode 1.1.6321.1.2.3.3.8.16.1.1.2
The latency mode is fast or interleave
OBJECT-TYPE    
  INTEGER interleave(1), fast(2)  

dslRateXtucMaxInterleaveDelay 1.1.6321.1.2.3.3.8.16.1.1.3
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
OBJECT-TYPE    
  INTEGER 0..255  

dslRateXtucMaxTxRate 1.1.6321.1.2.3.3.8.16.1.1.4
Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
OBJECT-TYPE    
  Unsigned32  

dslRateXtucMinTxRate 1.1.6321.1.2.3.3.8.16.1.1.5
Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps
OBJECT-TYPE    
  Unsigned32  

dslRateXturMaxInterleaveDelay 1.1.6321.1.2.3.3.8.16.1.1.6
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency
OBJECT-TYPE    
  INTEGER 0..255  

dslRateXturMaxTxRate 1.1.6321.1.2.3.3.8.16.1.1.7
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
OBJECT-TYPE    
  Unsigned32  

dslRateXturMinTxRate 1.1.6321.1.2.3.3.8.16.1.1.8
Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
OBJECT-TYPE    
  Unsigned32  

gbondGroupTable 1.1.6321.1.2.3.3.8.51.1
A table containing the G.Bond configuration information for each bonding group of the device.
OBJECT-TYPE    
  SEQUENCE OF  
    GbondGroupEntry

gbondGroupEntry 1.1.6321.1.2.3.3.8.51.1.1
An entry of gbondTable.
OBJECT-TYPE    
  GbondGroupEntry  

gbondGroupName 1.1.6321.1.2.3.3.8.51.1.1.1
An administratively assigned string, which may be used to identify bonding group.
OBJECT-TYPE    
  STRING Size(0..31)  

gbondGroupPorts 1.1.6321.1.2.3.3.8.51.1.1.2
The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
OBJECT-TYPE    
  STRING  

gbondGroupUpRate 1.1.6321.1.2.3.3.8.51.1.1.4
The UP stream rate.
OBJECT-TYPE    
  Unsigned32  

gbondGroupDownRate 1.1.6321.1.2.3.3.8.51.1.1.5
The DOWN stream rate.
OBJECT-TYPE    
  Unsigned32  

gbondGroupRowStatus 1.1.6321.1.2.3.3.8.51.1.1.6
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

sraShiftMarginProfile 1.1.6321.1.2.3.3.9.1
OBJECT IDENTIFIER    

ipqosProfile 1.1.6321.1.2.3.3.9.8
OBJECT IDENTIFIER    

sraShiftMarginProfileTable 1.1.6321.1.2.3.3.9.1.1
This table includes sra shift margin related configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    SraShiftMarginProfileEntry

sraShiftMarginProfileEntry 1.1.6321.1.2.3.3.9.1.1.1
An entry in ipqosProfileTable.
OBJECT-TYPE    
  SraShiftMarginProfileEntry  

sraShiftMarginProfileName 1.1.6321.1.2.3.3.9.1.1.1.1
This object identifies a row in this table.
OBJECT-TYPE    
  DisplayString Size(1..40)  

xtucConfDownshiftSnrMgn 1.1.6321.1.2.3.3.9.1.1.1.2
Specifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
OBJECT-TYPE    
  INTEGER 0..31  

xtucConfUpshiftSnrMgn 1.1.6321.1.2.3.3.9.1.1.1.3
Specifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
OBJECT-TYPE    
  INTEGER 0..31  

xtucConfDownshiftTime 1.1.6321.1.2.3.3.9.1.1.1.4
Specifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
OBJECT-TYPE    
  INTEGER 0..31  

xtucConfUpshiftTime 1.1.6321.1.2.3.3.9.1.1.1.5
Specifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
OBJECT-TYPE    
  INTEGER 0..31  

xturConfDownshiftSnrMgn 1.1.6321.1.2.3.3.9.1.1.1.6
Specifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
OBJECT-TYPE    
  INTEGER 0..31  

xturConfUpshiftSnrMgn 1.1.6321.1.2.3.3.9.1.1.1.7
Specifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
OBJECT-TYPE    
  INTEGER 0..31  

xturConfDownshiftTime 1.1.6321.1.2.3.3.9.1.1.1.8
Specifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
OBJECT-TYPE    
  INTEGER 0..31  

xturConfUpshiftTime 1.1.6321.1.2.3.3.9.1.1.1.9
Specifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
OBJECT-TYPE    
  INTEGER 0..31  

sraShiftMarginProfileStatus 1.1.6321.1.2.3.3.9.1.1.1.10
This object is used to create a new row or modify or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

maxNumOfIpqosProfiles 1.1.6321.1.2.3.3.9.8.1
The maximum number of IPQOS profiles supported by the system.
OBJECT-TYPE    
  INTEGER  

ipqosProfileTable 1.1.6321.1.2.3.3.9.8.2
This table includes IPQOS related configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    IpqosProfileEntry

ipqosProfileEntry 1.1.6321.1.2.3.3.9.8.2.1
An entry in ipqosProfileTable.
OBJECT-TYPE    
  IpqosProfileEntry  

ipqosProfileName 1.1.6321.1.2.3.3.9.8.2.1.1
This object is used by the IPQOS profile table in order to identify a row of this table.
OBJECT-TYPE    
  DisplayString Size(1..31)  

ipqosProfileNumOfQueue 1.1.6321.1.2.3.3.9.8.2.1.2
The number of IPQOS queues.
OBJECT-TYPE    
  INTEGER 1..8  

ipqosProfileRowStatus 1.1.6321.1.2.3.3.9.8.2.1.3
This object is used to create a new row or delete an existing row in the table.
OBJECT-TYPE    
  RowStatus  

ipqosProfileQueueTable 1.1.6321.1.2.3.3.9.8.3
This table includes IPQOS queue related configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    IpqosProfileQueueEntry

ipqosProfileQueueEntry 1.1.6321.1.2.3.3.9.8.3.1
An entry in ipqosProfileQueueTable.
OBJECT-TYPE    
  IpqosProfileQueueEntry  

ipqosProfileQueueIndex 1.1.6321.1.2.3.3.9.8.3.1.1
IPQOS queue index.
OBJECT-TYPE    
  INTEGER  

ipqosProfileQueuePIR 1.1.6321.1.2.3.3.9.8.3.1.2
Peak rate.(multiple of 256)
OBJECT-TYPE    
  INTEGER 512..131072  

ipqosProfileQueueCIR 1.1.6321.1.2.3.3.9.8.3.1.3
Commited rate.(multiple of 256)
OBJECT-TYPE    
  INTEGER 256..65536  

ipqosProfileQueuePBS 1.1.6321.1.2.3.3.9.8.3.1.4
Peak burst size.(mutiple of 256)
OBJECT-TYPE    
  INTEGER 3072..65536  

ipqosProfileQueueCBS 1.1.6321.1.2.3.3.9.8.3.1.5
Commited burst size.(mutiple of 256)
OBJECT-TYPE    
  INTEGER 3072..65536  

ipqosProfileQueueLevel 1.1.6321.1.2.3.3.9.8.3.1.6
Queue level.
OBJECT-TYPE    
  INTEGER 0..7  

ipqosProfileQueueWeight 1.1.6321.1.2.3.3.9.8.3.1.7
Queue weight.
OBJECT-TYPE    
  INTEGER 1..127  

dot3ad 1.1.6321.1.2.3.3.10.6
OBJECT IDENTIFIER    

dscp 1.1.6321.1.2.3.3.10.10
OBJECT IDENTIFIER    

vlanIsolation 1.1.6321.1.2.3.3.10.12
OBJECT IDENTIFIER    

enetMtu 1.1.6321.1.2.3.3.10.13
OBJECT IDENTIFIER    

tpid 1.1.6321.1.2.3.3.10.14
OBJECT IDENTIFIER    

cfm 1.1.6321.1.2.3.3.10.15
OBJECT IDENTIFIER    

dhcp 1.1.6321.1.2.3.3.10.51
OBJECT IDENTIFIER    

macfilter 1.1.6321.1.2.3.3.10.53
OBJECT IDENTIFIER    

dhcpSnoop 1.1.6321.1.2.3.3.10.55
OBJECT IDENTIFIER    

acl 1.1.6321.1.2.3.3.10.56
OBJECT IDENTIFIER    

pppoeAgent 1.1.6321.1.2.3.3.10.57
OBJECT IDENTIFIER    

n1mac 1.1.6321.1.2.3.3.10.58
OBJECT IDENTIFIER    

macff 1.1.6321.1.2.3.3.10.60
OBJECT IDENTIFIER    

dot3adTable 1.1.6321.1.2.3.3.10.6.1
The table contains 802.3ad configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot3adEntry

dot3adEntry 1.1.6321.1.2.3.3.10.6.1.1
Tok_String
OBJECT-TYPE    
  Dot3adEntry  

dot3adGroupId 1.1.6321.1.2.3.3.10.6.1.1.1
Group ID 1 for the subtending group and 2 for the uplink group.
OBJECT-TYPE    
  INTEGER  

dot3adEnable 1.1.6321.1.2.3.3.10.6.1.1.2
Enable/disable 802.3ad function.
OBJECT-TYPE    
  INTEGER enable(1), enableWithLacp(2), disable(3)  

lacpPriority 1.1.6321.1.2.3.3.10.6.2
LACP system priority.
OBJECT-TYPE    
  INTEGER 0..65535  

lacpTimeout 1.1.6321.1.2.3.3.10.6.3
The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up.
OBJECT-TYPE    
  INTEGER shorttimeout(1), longtimeout(2)  

portTrunkingTable 1.1.6321.1.2.3.3.10.6.4
The table contains current status of port trunking.
OBJECT-TYPE    
  SEQUENCE OF  
    PortTrunkingEntry

portTrunkingEntry 1.1.6321.1.2.3.3.10.6.4.1
Tok_String
OBJECT-TYPE    
  PortTrunkingEntry  

portTrunkingGroupId 1.1.6321.1.2.3.3.10.6.4.1.1
Group ID 1 for the subtending group and 2 for the uplink group.
OBJECT-TYPE    
  INTEGER  

portTrunkingStatus 1.1.6321.1.2.3.3.10.6.4.1.2
Port trunking status.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

portTrunkingPortList 1.1.6321.1.2.3.3.10.6.4.1.3
The port list which actually joins the trunking group.
OBJECT-TYPE    
  PortList  

dscpMappingTable 1.1.6321.1.2.3.3.10.10.1
The table contains DSCP mapping configuration for the adsl ports.
OBJECT-TYPE    
  SEQUENCE OF  
    DscpMappingEntry

dscpMappingEntry 1.1.6321.1.2.3.3.10.10.1.1
An entry of dscpMappingTable.
OBJECT-TYPE    
  DscpMappingEntry  

dscpSrcCodePoint 1.1.6321.1.2.3.3.10.10.1.1.1
The DSCP source code point used for mapping.
OBJECT-TYPE    
  INTEGER  

dscpMapPriority 1.1.6321.1.2.3.3.10.10.1.1.3
The mapping p bits that will replace the source p bits in the incoming packet.
OBJECT-TYPE    
  INTEGER 0..7  

dscpPortTable 1.1.6321.1.2.3.3.10.10.2
The table contains DSCP mapping configuration for the adsl ports.
OBJECT-TYPE    
  SEQUENCE OF  
    DscpPortEntry

dscpPortEntry 1.1.6321.1.2.3.3.10.10.2.1
An entry of dscpPortTable.
OBJECT-TYPE    
  DscpPortEntry  

dscpStatusEnable 1.1.6321.1.2.3.3.10.10.2.1.1
The DSCP port status.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vlanIsolationTable 1.1.6321.1.2.3.3.10.12.1
A table contains configuration of isolated VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    VlanIsolationEntry

vlanIsolationEntry 1.1.6321.1.2.3.3.10.12.1.1
An entry of vlanIsolationTable.
OBJECT-TYPE    
  VlanIsolationEntry  

vlanIsolationRowStatus 1.1.6321.1.2.3.3.10.12.1.1.1
Row status of the table used to create/delete an entry.
OBJECT-TYPE    
  RowStatus  

enetMtuEntry 1.1.6321.1.2.3.3.10.13.1
Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526.
OBJECT-TYPE    
  INTEGER  

tpidEntry 1.1.6321.1.2.3.3.10.14.1
Sets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF.
OBJECT-TYPE    
  Unsigned32  

cfmLoopbackPortTable 1.1.6321.1.2.3.3.10.15.1
A table that contains CFM information.
OBJECT-TYPE    
  SEQUENCE OF  
    CfmLoopbackPortEntry

cfmLoopbackPortEntry 1.1.6321.1.2.3.3.10.15.1.1
An entry in cfmLoopbackPortTable.
OBJECT-TYPE    
  CfmLoopbackPortEntry  

cfmLoopbackPortState 1.1.6321.1.2.3.3.10.15.1.1.1
CFM loopback enable/disable on the port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cfmMIPTable 1.1.6321.1.2.3.3.10.15.2
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    CfmMIPEntry

cfmMIPEntry 1.1.6321.1.2.3.3.10.15.2.1
An entry in cfmMIPTable.
OBJECT-TYPE    
  CfmMIPEntry  

cfmPort 1.1.6321.1.2.3.3.10.15.2.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

cfmMIPRowStatus 1.1.6321.1.2.3.3.10.15.2.1.4
Tok_String
OBJECT-TYPE    
  RowStatus  

cfmMIPMacAddr 1.1.6321.1.2.3.3.10.15.2.1.5
CFM MIP mac address
OBJECT-TYPE    
  PhysAddress  

cfmActionEnableStatus 1.1.6321.1.2.3.3.10.15.3
CFM Action enable status for the CO device
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cfmMode 1.1.6321.1.2.3.3.10.15.4
CFM follow standard mode
OBJECT-TYPE    
  INTEGER mode802Dot1Ag(1), modeYDot1731(2)  

cfmLbmTimeout 1.1.6321.1.2.3.3.10.15.5
CFM LBM timeout, 100-86400 ms
OBJECT-TYPE    
  INTEGER 100..86400  

cfmLbmDataTlvLength 1.1.6321.1.2.3.3.10.15.6
CFM LBM data tlv length, 0-1400 bytes
OBJECT-TYPE    
  INTEGER 0..1400  

cfmLbrTable 1.1.6321.1.2.3.3.10.15.7
A table that contains CFM LBR results.
OBJECT-TYPE    
  SEQUENCE OF  
    CfmLbrEntry

cfmLbrEntry 1.1.6321.1.2.3.3.10.15.7.1
An entry in cfmLbrTable.
OBJECT-TYPE    
  CfmLbrEntry  

cfmLbmIndex 1.1.6321.1.2.3.3.10.15.7.1.1
CFM lbm index.
OBJECT-TYPE    
  INTEGER  

cfmLbrIndex 1.1.6321.1.2.3.3.10.15.7.1.2
CFM lbr index.
OBJECT-TYPE    
  INTEGER  

cfmLbrSrcMac 1.1.6321.1.2.3.3.10.15.7.1.3
CFM lbr source address.
OBJECT-TYPE    
  PhysAddress  

cfmLbrStatus 1.1.6321.1.2.3.3.10.15.7.1.4
CFM lbr status.
OBJECT-TYPE    
  INTEGER ready(1), notready(2), xmit(3), success(4), timeout(5)  

cfmLbrRtt 1.1.6321.1.2.3.3.10.15.7.1.5
CFM lbr rtt in ms.
OBJECT-TYPE    
  INTEGER  

dhcpRelay82Table 1.1.6321.1.2.3.3.10.51.2
A table that contains DHCP Relay configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelay82Entry

dhcpRelay82Entry 1.1.6321.1.2.3.3.10.51.2.1
The entry of DHCP Relay table.
OBJECT-TYPE    
  DhcpRelay82Entry  

dhcpRelay82PrimaryServer 1.1.6321.1.2.3.3.10.51.2.1.1
The IP address of the DHCP Relay primary server.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82SecondaryServer 1.1.6321.1.2.3.3.10.51.2.1.2
The IP address of the DHCP Relay secondary server.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82ActiveServer 1.1.6321.1.2.3.3.10.51.2.1.3
The current active DHCP Relay server.
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), third(3), fourth(4), fifth(5)  

dhcpRelay82Enable 1.1.6321.1.2.3.3.10.51.2.1.4
Enable/disable DHCP relay and Option82 function.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpRelay82Info 1.1.6321.1.2.3.3.10.51.2.1.5
User specific Option82 information.
OBJECT-TYPE    
  DisplayString Size(0..23)  

dhcpRelay82RelayMode 1.1.6321.1.2.3.3.10.51.2.1.6
DHCP relay mode.
OBJECT-TYPE    
  INTEGER auto(1), all(2)  

dhcpRelay82Suboption2Enable 1.1.6321.1.2.3.3.10.51.2.1.8
Enable/disable Option 82 sub-option 2.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpRelay82Suboption2Info 1.1.6321.1.2.3.3.10.51.2.1.9
User specified information for Option 82 sub-option 2.
OBJECT-TYPE    
  DisplayString  

dhcpRelay82EntryEnable 1.1.6321.1.2.3.3.10.51.2.1.10
Enable/disable DHCP Relay
OBJECT-TYPE    
  INTEGER auto(1), all(2), disable(3)  

dhcpRelay82EntryOptionMode 1.1.6321.1.2.3.3.10.51.2.1.11
Option82 format.
OBJECT-TYPE    
  INTEGER private(1), tr101(2), customer-remote-id(3)  

dhcpRelay82VlanIp 1.1.6321.1.2.3.3.10.51.2.1.12
The IP address of the DHCP Relay interface for this VLAN.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82VlanMask 1.1.6321.1.2.3.3.10.51.2.1.13
The network mask of the DHCP Relay interface for this VLAN.
OBJECT-TYPE    
  INTEGER  

dhcpRelay82VlanGateway 1.1.6321.1.2.3.3.10.51.2.1.14
The gateway of the DHCP Relay interface for this VLAN.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82ThirdServer 1.1.6321.1.2.3.3.10.51.2.1.15
The IP address of the DHCP Relay third server.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82FourthServer 1.1.6321.1.2.3.3.10.51.2.1.16
The IP address of the DHCP Relay fourth server.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82FifthServer 1.1.6321.1.2.3.3.10.51.2.1.17
The IP address of the DHCP Relay fifth server.
OBJECT-TYPE    
  IpAddress  

dhcpRelay82ServerVid 1.1.6321.1.2.3.3.10.51.2.1.18
The VID of the DHCP Relay server for this VLAN.
OBJECT-TYPE    
  INTEGER  

dhcpRelayTest 1.1.6321.1.2.3.3.10.51.8
OBJECT IDENTIFIER    

dhcpRelayTestVid 1.1.6321.1.2.3.3.10.51.8.1
Setting the VID of the test server.
OBJECT-TYPE    
  INTEGER  

dhcpRelayTestIp 1.1.6321.1.2.3.3.10.51.8.2
Setting the IP of the test server.
OBJECT-TYPE    
  IpAddress  

dhcpRelayTestOps 1.1.6321.1.2.3.3.10.51.8.3
Set the object to 1 to test DHCP server.
OBJECT-TYPE    
  INTEGER  

dhcpRelayTestStatus 1.1.6321.1.2.3.3.10.51.8.4
Display testing server status.
OBJECT-TYPE    
  DisplayString  

dhcpRelayArp 1.1.6321.1.2.3.3.10.51.9
OBJECT IDENTIFIER    

dhcpRelayArpShowTable 1.1.6321.1.2.3.3.10.51.9.1
The table displays DHCP ARP.
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelayArpShowEntry

dhcpRelayArpShowEntry 1.1.6321.1.2.3.3.10.51.9.1.1
An entry of dhcpRelayArpShowTable.
OBJECT-TYPE    
  DhcpRelayArpShowEntry  

dhcpRelayArpShowVid 1.1.6321.1.2.3.3.10.51.9.1.1.1
Display the VID of the DHCP ARP entry.
OBJECT-TYPE    
  INTEGER  

dhcpRelayArpShowIp 1.1.6321.1.2.3.3.10.51.9.1.1.2
Display the IP of the DHCP ARP entry.
OBJECT-TYPE    
  IpAddress  

dhcpRelayArpShowMac 1.1.6321.1.2.3.3.10.51.9.1.1.3
Display the MAC of the DHCP ARP entry.
OBJECT-TYPE    
  PhysAddress  

dhcpRelayArpFlushOps 1.1.6321.1.2.3.3.10.51.9.2
Set the object to 1 to start flushing.
OBJECT-TYPE    
  INTEGER  

macFilterPortTable 1.1.6321.1.2.3.3.10.53.1
This table includes the status of mac filtering for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    MacFilterPortEntry

macFilterPortEntry 1.1.6321.1.2.3.3.10.53.1.1
An entry in macFilterPortTable.
OBJECT-TYPE    
  MacFilterPortEntry  

macFilterPortEnable 1.1.6321.1.2.3.3.10.53.1.1.1
Enable/disable MAC filtering for the port.
OBJECT-TYPE    
  INTEGER enableMacFilter(1), enableMacCount(2), disable(4), enableMacFilterAndMacCount(5)  

macFilterPortMacCount 1.1.6321.1.2.3.3.10.53.1.1.2
The total number of MAC addresses allowed for the port.
OBJECT-TYPE    
  INTEGER 1..128  

macFilterPortFilterMode 1.1.6321.1.2.3.3.10.53.1.1.3
The mac filter mode (accept or deny) for the port.
OBJECT-TYPE    
  INTEGER accept(1), deny(2)  

maxNumOfMacFiltersInSystem 1.1.6321.1.2.3.3.10.53.2
The max number of mac filters supported in the system.
OBJECT-TYPE    
  INTEGER  

maxNumOfMacFiltersPerPort 1.1.6321.1.2.3.3.10.53.3
The max number of mac filters supported per port.
OBJECT-TYPE    
  INTEGER  

currNumOfMacFiltersInSystem 1.1.6321.1.2.3.3.10.53.4
The current number of mac filters in the system.
OBJECT-TYPE    
  INTEGER  

macFilterTable 1.1.6321.1.2.3.3.10.53.5
A table that contains the mac filter addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    MacFilterEntry

macFilterEntry 1.1.6321.1.2.3.3.10.53.5.1
The entry of macFilterTable.
OBJECT-TYPE    
  MacFilterEntry  

macFilterAddr 1.1.6321.1.2.3.3.10.53.5.1.1
The mac address which can pass through or be rejected from the port.
OBJECT-TYPE    
  PhysAddress  

macFilterRowStatus 1.1.6321.1.2.3.3.10.53.5.1.2
The row status of the entry.
OBJECT-TYPE    
  RowStatus  

macfilterBatchSet 1.1.6321.1.2.3.3.10.53.6
OBJECT IDENTIFIER    

macfilterTarget 1.1.6321.1.2.3.3.10.53.6.1
This managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis) Byte 2~3: 0, Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
OBJECT-TYPE    
  STRING  

macfilterOps 1.1.6321.1.2.3.3.10.53.6.2
The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter.
OBJECT-TYPE    
  INTEGER  

macFilterMacCountForBatchSet 1.1.6321.1.2.3.3.10.53.6.3
The total number of MAC addresses allowed for a port.
OBJECT-TYPE    
  INTEGER 1..128  

ouiFilterTable 1.1.6321.1.2.3.3.10.53.7
A table that contains the OUI filter addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    OuiFilterEntry

ouiFilterEntry 1.1.6321.1.2.3.3.10.53.7.1
The entry of ouiFilterTable.
OBJECT-TYPE    
  OuiFilterEntry  

ouiFilterAddr 1.1.6321.1.2.3.3.10.53.7.1.1
The first three bytes of the mac address which can pass through or be rejected from the port.
OBJECT-TYPE    
  STRING  

ouiFilterRowStatus 1.1.6321.1.2.3.3.10.53.7.1.2
The row status of the entry.
OBJECT-TYPE    
  RowStatus  

maxNumOfOuiFiltersPerPort 1.1.6321.1.2.3.3.10.53.8
The max number of OUI filters supported per port.
OBJECT-TYPE    
  INTEGER  

ouiFilterPortTable 1.1.6321.1.2.3.3.10.53.9
This table includes the status of oui filtering for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    OuiFilterPortEntry

ouiFilterPortEntry 1.1.6321.1.2.3.3.10.53.9.1
An entry in macFilterPortTable.
OBJECT-TYPE    
  OuiFilterPortEntry  

ouiFilterPortEnable 1.1.6321.1.2.3.3.10.53.9.1.1
Enable/disable oui filtering for the port.
OBJECT-TYPE    
  INTEGER enableOuiFilter(1), disable(2)  

ouiFilterPortFilterMode 1.1.6321.1.2.3.3.10.53.9.1.2
The oui filter mode (accept or deny) for the port.
OBJECT-TYPE    
  INTEGER accept(1), deny(2)  

dhcpSnoopPortTable 1.1.6321.1.2.3.3.10.55.1
This table includes DHCP snooping enable/disable for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnoopPortEntry

dhcpSnoopPortEntry 1.1.6321.1.2.3.3.10.55.1.1
An entry of dhcpSnoopPortTable.
OBJECT-TYPE    
  DhcpSnoopPortEntry  

dhcpSnoopEnable 1.1.6321.1.2.3.3.10.55.1.1.1
Enable/disable DHCP snooping for a port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpSnoopMaxcnt 1.1.6321.1.2.3.3.10.55.1.1.2
Set the max entries of the DHCP ARP table.
OBJECT-TYPE    
  INTEGER  

dhcpSnoopSmacverifyEnable 1.1.6321.1.2.3.3.10.55.1.1.3
Enable/disable DHCP source MAC verify for a port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dhcpSnoopTarget 1.1.6321.1.2.3.3.10.55.2
This managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
OBJECT-TYPE    
  STRING  

dhcpSnoopOps 1.1.6321.1.2.3.3.10.55.3
The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
OBJECT-TYPE    
  INTEGER  

dhcpStaticTable 1.1.6321.1.2.3.3.10.55.4
This table defines DHCP static IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpStaticEntry

dhcpStaticEntry 1.1.6321.1.2.3.3.10.55.4.1
An entry of dhcpStaticTable.
OBJECT-TYPE    
  DhcpStaticEntry  

dhcpStaticIpAddr 1.1.6321.1.2.3.3.10.55.4.1.1
The IP address which can pass through the port.
OBJECT-TYPE    
  IpAddress  

dhcpStaticRowStatus 1.1.6321.1.2.3.3.10.55.4.1.2
Row status of the table entry.
OBJECT-TYPE    
  RowStatus  

maxNumOfDhcpStaticIp 1.1.6321.1.2.3.3.10.55.5
The maximum number of DHCP static IP addresses which can be created for a port.
OBJECT-TYPE    
  INTEGER  

dhcpSnoopMaxcntMode 1.1.6321.1.2.3.3.10.55.6
When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1.
OBJECT-TYPE    
  INTEGER replace(1), drop(2)  

aclSetTable 1.1.6321.1.2.3.3.10.56.1
aclsetTable.
OBJECT-TYPE    
  SEQUENCE OF  
    AclSetEntry

aclSetEntry 1.1.6321.1.2.3.3.10.56.1.1
An entry of aclSetTable.
OBJECT-TYPE    
  AclSetEntry  

aclSetVpi 1.1.6321.1.2.3.3.10.56.1.1.1
VPI value
OBJECT-TYPE    
  INTEGER  

aclSetVci 1.1.6321.1.2.3.3.10.56.1.1.2
VCI value
OBJECT-TYPE    
  INTEGER  

aclSetProfileName 1.1.6321.1.2.3.3.10.56.1.1.3
ACL Profile name
OBJECT-TYPE    
  DisplayString  

aclSetRowStatus 1.1.6321.1.2.3.3.10.56.1.1.4
RowStatus of aclSetEntry
OBJECT-TYPE    
  RowStatus  

aclProfileTable 1.1.6321.1.2.3.3.10.56.2
aclProfileTable.
OBJECT-TYPE    
  SEQUENCE OF  
    AclProfileEntry

aclProfileEntry 1.1.6321.1.2.3.3.10.56.2.1
An entry of aclProfileTable.
OBJECT-TYPE    
  AclProfileEntry  

aclProfileRuleName 1.1.6321.1.2.3.3.10.56.2.1.1
Profile rule name
OBJECT-TYPE    
  DisplayString  

aclProfileRuleNumber 1.1.6321.1.2.3.3.10.56.2.1.2
The managed object is for acl profile rule configuration. etype vlan (1), etype smac (2), etype dmac (3), vlan smac (4), vlan dmac (5), smac dmac (6), vlan priority (7), etype (8), vlan (9), smac (10), dmac (11), priority (12), protocol (13), vlan sip (14), vlan dip (15), vlan sport tcp|udp (16), vlan dport tcp|udp (17)
OBJECT-TYPE    
  INTEGER  

aclProfileActionNumber 1.1.6321.1.2.3.3.10.56.2.1.3
Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
OBJECT-TYPE    
  INTEGER  

aclProfileRuleParamMask 1.1.6321.1.2.3.3.10.56.2.1.4
Profile rule parameter mask. BIT 1: srcip / BIT 2: dstip / BIT 3: tos BIT 4: srcport BIT 5: dstport
OBJECT-TYPE    
  INTEGER  

aclProfileRuleEtype 1.1.6321.1.2.3.3.10.56.2.1.5
Profile rule etype
OBJECT-TYPE    
  INTEGER 0..65535  

aclProfileRuleVid 1.1.6321.1.2.3.3.10.56.2.1.6
Profile rule vid
OBJECT-TYPE    
  INTEGER 1..4094  

aclProfileRuleSmac 1.1.6321.1.2.3.3.10.56.2.1.7
Profile rule source MAC
OBJECT-TYPE    
  PhysAddress  

aclProfileRuleDmac 1.1.6321.1.2.3.3.10.56.2.1.8
Profile rule destination MAC
OBJECT-TYPE    
  PhysAddress  

aclProfileRulePriority 1.1.6321.1.2.3.3.10.56.2.1.9
Profile rule priority
OBJECT-TYPE    
  INTEGER 0..7  

aclProfileRuleProtocol 1.1.6321.1.2.3.3.10.56.2.1.10
Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
OBJECT-TYPE    
  INTEGER 0..255  

aclProfileActionRate 1.1.6321.1.2.3.3.10.56.2.1.21
Profile action to replace to this rate
OBJECT-TYPE    
  INTEGER 32..65472  

aclProfileActionrvlan 1.1.6321.1.2.3.3.10.56.2.1.22
Profile action to replace to this vlan
OBJECT-TYPE    
  INTEGER 1..4094  

aclProfileActionrpri 1.1.6321.1.2.3.3.10.56.2.1.23
Profile action to replace to this priority
OBJECT-TYPE    
  INTEGER 0..7  

aclProfileRowStatus 1.1.6321.1.2.3.3.10.56.2.1.24
The row status of the entry.
OBJECT-TYPE    
  RowStatus  

aclProfileRuleSip 1.1.6321.1.2.3.3.10.56.2.1.25
Source IP.
OBJECT-TYPE    
  IpAddress  

aclProfileRuleDip 1.1.6321.1.2.3.3.10.56.2.1.26
Destination IP.
OBJECT-TYPE    
  IpAddress  

aclProfileRuleSport 1.1.6321.1.2.3.3.10.56.2.1.27
Source port.
OBJECT-TYPE    
  INTEGER 0..65535  

aclProfileRuleDport 1.1.6321.1.2.3.3.10.56.2.1.28
Destination port.
OBJECT-TYPE    
  INTEGER 0..65535  

pppoeAgentTable 1.1.6321.1.2.3.3.10.57.1
A table that contains PPPoE intermediate agent configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    PppoeAgentEntry

pppoeAgentEntry 1.1.6321.1.2.3.3.10.57.1.1
An entry of pppoeAgentTable.
OBJECT-TYPE    
  PppoeAgentEntry  

pppoeAgentEnable 1.1.6321.1.2.3.3.10.57.1.1.1
Enable/disable PppoE intermediate agent function.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppoeAgentInfo 1.1.6321.1.2.3.3.10.57.1.1.2
User specific Option82 information.
OBJECT-TYPE    
  DisplayString Size(0..23)  

pppoeAgentRowStatus 1.1.6321.1.2.3.3.10.57.1.1.3
Row status of the table entry.
OBJECT-TYPE    
  RowStatus  

pppoeAgentOptionMode 1.1.6321.1.2.3.3.10.57.1.1.4
Option82 format.
OBJECT-TYPE    
  INTEGER private(1), tr101(2)  

maxNumOfPppoeAgentConf 1.1.6321.1.2.3.3.10.57.2
The maximum number of rows that can be created in pppoeAgentTable.
OBJECT-TYPE    
  INTEGER  

n1macReplaceMac 1.1.6321.1.2.3.3.10.58.1
This MAC address will be used to replace client's MAC address.
OBJECT-TYPE    
  MacAddress  

n1macPortTable 1.1.6321.1.2.3.3.10.58.2
The table contains N to 1 MAC configuration for DSL ports.
OBJECT-TYPE    
  SEQUENCE OF  
    N1macPortEntry

n1macPortEntry 1.1.6321.1.2.3.3.10.58.2.1
An entry of n1macPortTable.
OBJECT-TYPE    
  N1macPortEntry  

n1macStatusEnable 1.1.6321.1.2.3.3.10.58.2.1.1
The port status of n1mac function.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

macFfTable 1.1.6321.1.2.3.3.10.60.1
A table that contains MAC Force Forwarding configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MacFfEntry

macFfEntry 1.1.6321.1.2.3.3.10.60.1.1
An entry of macFfTable.
OBJECT-TYPE    
  MacFfEntry  

macFfIndex 1.1.6321.1.2.3.3.10.60.1.1.1
Index of the MACFF.
OBJECT-TYPE    
  INTEGER  

macFfVid 1.1.6321.1.2.3.3.10.60.1.1.2
The VLAN-ID refering to this AR/AS.
OBJECT-TYPE    
  INTEGER  

macFfArIP 1.1.6321.1.2.3.3.10.60.1.1.3
IP of this AR/AS
OBJECT-TYPE    
  IpAddress  

macFfSrcIP 1.1.6321.1.2.3.3.10.60.1.1.4
The source IP address of the MACFF.
OBJECT-TYPE    
  IpAddress  

macFfSrcMask 1.1.6321.1.2.3.3.10.60.1.1.5
The subnet mask of source IP mask.
OBJECT-TYPE    
  INTEGER  

macFfRowStatus 1.1.6321.1.2.3.3.10.60.1.1.6
The row status of the MacFfEntry entry.
OBJECT-TYPE    
  RowStatus  

macFfArpFlush 1.1.6321.1.2.3.3.10.60.3
Set the object to 1 to flush mac table.
OBJECT-TYPE    
  INTEGER  

maxNumOfMacFfVlanInSystem 1.1.6321.1.2.3.3.10.60.4
The max number of macff Vlans supported in the system.
OBJECT-TYPE    
  INTEGER  

macFfVlanTable 1.1.6321.1.2.3.3.10.60.5
A table that contains MAC Force Forwarding Vlan configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MacFfVlanEntry

macFfVlanEntry 1.1.6321.1.2.3.3.10.60.5.1
An entry of macFfVlanTable.
OBJECT-TYPE    
  MacFfVlanEntry  

macFfVlanRowstatus 1.1.6321.1.2.3.3.10.60.5.1.1
Row status of the table used to create/delete an entry.
OBJECT-TYPE    
  RowStatus  

macFfStaticIPTable 1.1.6321.1.2.3.3.10.60.6
OBJECT-TYPE    
  SEQUENCE OF  
    MacFfStaticIPEntry

macFfStaticIPEntry 1.1.6321.1.2.3.3.10.60.6.1
An entry of macFfTable.
OBJECT-TYPE    
  MacFfStaticIPEntry  

macFfStaticIPPort 1.1.6321.1.2.3.3.10.60.6.1.1
The port number, 1 ~ 48.
OBJECT-TYPE    
  INTEGER  

macFfStaticIPVid 1.1.6321.1.2.3.3.10.60.6.1.2
VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
OBJECT-TYPE    
  INTEGER  

macFfstaticIP 1.1.6321.1.2.3.3.10.60.6.1.3
The specified IP range.
OBJECT-TYPE    
  IpAddress  

macFfStaticIPMask 1.1.6321.1.2.3.3.10.60.6.1.4
Mask_bits is 24 .. 32.
OBJECT-TYPE    
  INTEGER  

macFfStaticIPRowStatus 1.1.6321.1.2.3.3.10.60.6.1.5
The row status used to configure the table entry.
OBJECT-TYPE    
  RowStatus  

macFfServerMacTable 1.1.6321.1.2.3.3.10.60.7
OBJECT-TYPE    
  SEQUENCE OF  
    MacFfServerMacEntry

macFfServerMacEntry 1.1.6321.1.2.3.3.10.60.7.1
An entry of macFfTable.
OBJECT-TYPE    
  MacFfServerMacEntry  

macFfServerMacVid 1.1.6321.1.2.3.3.10.60.7.1.1
VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
OBJECT-TYPE    
  INTEGER  

macFfServerMacAddr 1.1.6321.1.2.3.3.10.60.7.1.2
The mac address.
OBJECT-TYPE    
  PhysAddress  

macFfServerMacRowStatus 1.1.6321.1.2.3.3.10.60.7.1.3
The row status used to configure the table entry.
OBJECT-TYPE    
  RowStatus  

timeSetup 1.1.6321.1.2.3.3.11.4
OBJECT IDENTIFIER    

accessCtrl 1.1.6321.1.2.3.3.11.5
OBJECT IDENTIFIER    

extAlarm 1.1.6321.1.2.3.3.11.8
OBJECT IDENTIFIER    

user 1.1.6321.1.2.3.3.11.9
OBJECT IDENTIFIER    

usbCastCtrl 1.1.6321.1.2.3.3.11.10
OBJECT IDENTIFIER    

dsQos 1.1.6321.1.2.3.3.11.11
OBJECT IDENTIFIER    

fwUpgrade 1.1.6321.1.2.3.3.11.14
OBJECT IDENTIFIER    

delayedReboot 1.1.6321.1.2.3.3.11.15
OBJECT IDENTIFIER    

stdioTimeout 1.1.6321.1.2.3.3.11.12
Set the stdio timeout, 0~300 minutes.
OBJECT-TYPE    
  INTEGER 0..300  

isConfigChanged 1.1.6321.1.2.3.3.11.13
If system configuration has been changed.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dayLightSaving 1.1.6321.1.2.3.3.11.4.7
OBJECT IDENTIFIER    

dayLightSavingAdminStatus 1.1.6321.1.2.3.3.11.4.7.1
Tok_String
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dayLightSavingStartTime 1.1.6321.1.2.3.3.11.4.7.2
OBJECT IDENTIFIER    

dayLightSavingStartMonth 1.1.6321.1.2.3.3.11.4.7.2.1
Tok_String
OBJECT-TYPE    
  INTEGER jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)  

dayLightSavingStartWeek 1.1.6321.1.2.3.3.11.4.7.2.2
Tok_String
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

dayLightSavingStartWday 1.1.6321.1.2.3.3.11.4.7.2.3
Tok_String
OBJECT-TYPE    
  INTEGER sun(1), mon(2), tus(3), wed(4), thu(5), fri(6), sat(7)  

dayLightSavingStartHour 1.1.6321.1.2.3.3.11.4.7.2.4
1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00
OBJECT-TYPE    
  INTEGER h0h00(0), h1h00(1), h2h00(2), h3h00(3), h4h00(4), h5h00(5), h6h00(6), h7h00(7), h8h00(8), h9h00(9), h10h00(10), h11h00(11), h12h00(12), h13h00(13), h14h00(14), h15h00(15), h16h00(16), h17h00(17), h18h00(18), h19h00(19), h20h00(20), h21h00(21), h22h00(22), h23h00(23)  

dayLightSavingEndTime 1.1.6321.1.2.3.3.11.4.7.3
OBJECT IDENTIFIER    

dayLightSavingEndMonth 1.1.6321.1.2.3.3.11.4.7.3.1
Tok_String
OBJECT-TYPE    
  INTEGER jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)  

dayLightSavingEndWeek 1.1.6321.1.2.3.3.11.4.7.3.2
Tok_String
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

dayLightSavingEndWday 1.1.6321.1.2.3.3.11.4.7.3.3
Tok_String
OBJECT-TYPE    
  INTEGER sun(1), mon(2), tus(3), wed(4), thu(5), fri(6), sat(7)  

dayLightSavingEndHour 1.1.6321.1.2.3.3.11.4.7.3.4
1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00
OBJECT-TYPE    
  INTEGER h0h00(0), h1h00(1), h2h00(2), h3h00(3), h4h00(4), h5h00(5), h6h00(6), h7h00(7), h8h00(8), h9h00(9), h10h00(10), h11h00(11), h12h00(12), h13h00(13), h14h00(14), h15h00(15), h16h00(16), h17h00(17), h18h00(18), h19h00(19), h20h00(20), h21h00(21), h22h00(22), h23h00(23)  

securedClientTable 1.1.6321.1.2.3.3.11.5.2
A table that contains information about secured clients.
OBJECT-TYPE    
  SEQUENCE OF  
    SecuredClientEntry

securedClientEntry 1.1.6321.1.2.3.3.11.5.2.1
A list of secured client entry.
OBJECT-TYPE    
  SecuredClientEntry  

securedClientIndex 1.1.6321.1.2.3.3.11.5.2.1.1
The index of the entry.
OBJECT-TYPE    
  INTEGER  

securedClientStartIp 1.1.6321.1.2.3.3.11.5.2.1.2
The starting IP address of the secured client set.
OBJECT-TYPE    
  IpAddress  

securedClientEndIp 1.1.6321.1.2.3.3.11.5.2.1.3
The ending IP address of the secured client set.
OBJECT-TYPE    
  IpAddress  

securedClientService 1.1.6321.1.2.3.3.11.5.2.1.4
Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions areh BIT 1h telnet BIT 2h ftp BIT 3h web BIT 4h icmp BIT 5h not support BIT 6h snmp.
OBJECT-TYPE    
  INTEGER  

securedClientEnable 1.1.6321.1.2.3.3.11.5.2.1.5
Enable/disable the entry.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

extAlarmTable 1.1.6321.1.2.3.3.11.8.1
A table that contains external alarm information.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtAlarmEntry

extAlarmEntry 1.1.6321.1.2.3.3.11.8.1.1
The entry of external alarm table.
OBJECT-TYPE    
  ExtAlarmEntry  

extAlarmIndex 1.1.6321.1.2.3.3.11.8.1.1.1
The index of the entry.
OBJECT-TYPE    
  INTEGER  

extAlarmName 1.1.6321.1.2.3.3.11.8.1.1.2
The external alarm name.
OBJECT-TYPE    
  DisplayString Size(1..31)  

extAlarmStatus 1.1.6321.1.2.3.3.11.8.1.1.3
Display 'Normal' or 'Alarm' string
OBJECT-TYPE    
  DisplayString Size(1..31)  

extAlarmTriggeredMode 1.1.6321.1.2.3.3.11.8.1.1.4
The external alarm triggered mode.
OBJECT-TYPE    
  INTEGER closeAlarm(1), openAlarm(2)  

userAuthMode 1.1.6321.1.2.3.3.11.9.1
User authentication procsssing mode.
OBJECT-TYPE    
  INTEGER local(1), radius(2), localThenRadius(3)  

userAuthServerIp 1.1.6321.1.2.3.3.11.9.2
The IP address of the authentication server.
OBJECT-TYPE    
  IpAddress  

userAuthServerPort 1.1.6321.1.2.3.3.11.9.3
The port of the authentication server.
OBJECT-TYPE    
  INTEGER  

userAuthServerSecret 1.1.6321.1.2.3.3.11.9.4
The secret between the authentication server and the NE for authentication process.
OBJECT-TYPE    
  STRING  

userTable 1.1.6321.1.2.3.3.11.9.5
A table that contains user information.
OBJECT-TYPE    
  SEQUENCE OF  
    UserEntry

userEntry 1.1.6321.1.2.3.3.11.9.5.1
An entry of userTable.
OBJECT-TYPE    
  UserEntry  

userName 1.1.6321.1.2.3.3.11.9.5.1.1
The user name.
OBJECT-TYPE    
  DisplayString  

userPassword 1.1.6321.1.2.3.3.11.9.5.1.2
The user password.
OBJECT-TYPE    
  DisplayString  

userPriviledge 1.1.6321.1.2.3.3.11.9.5.1.3
The user priviledge to decide what operation the user can and cannot do.
OBJECT-TYPE    
  INTEGER high(1), middle(2), low(3)  

userRowStatus 1.1.6321.1.2.3.3.11.9.5.1.4
The row status used to create or delete a user.
OBJECT-TYPE    
  RowStatus  

userAuthDefaultPriviledge 1.1.6321.1.2.3.3.11.9.6
The user default priviledge to be assigned when radius authentication succeeds but no user priviledge information(radius service-type) is provided.
OBJECT-TYPE    
  INTEGER high(1), middle(2), low(3), deny(4)  

usBcastCtrlEnable 1.1.6321.1.2.3.3.11.10.1
Enable/disable upstream broadcast control.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

usBcastCtrlRate 1.1.6321.1.2.3.3.11.10.2
Tok_String
OBJECT-TYPE    
  INTEGER  

dsQosEnableMode 1.1.6321.1.2.3.3.11.11.1
Enable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode.
OBJECT-TYPE    
  INTEGER disable(1), vlan(2), dscp(3), ippre(4)  

dsQosDefaultPri 1.1.6321.1.2.3.3.11.11.2
Set the internal default p.bit after overiding. All values not configured in the overriding table are assigned to the default p.bit
OBJECT-TYPE    
  INTEGER 0..7  

dsQoSOverridingTable 1.1.6321.1.2.3.3.11.11.3
This table includes downstream QoS overriding information.
OBJECT-TYPE    
  SEQUENCE OF  
    DsQoSOverridingEntry

dsQoSOverridingEntry 1.1.6321.1.2.3.3.11.11.3.1
An entry in dsQoSOverridingTable.
OBJECT-TYPE    
  DsQoSOverridingEntry  

dsQosPriority 1.1.6321.1.2.3.3.11.11.3.1.1
Internal P.bit after overriding.
OBJECT-TYPE    
  INTEGER 0..7  

dsQosValueList 1.1.6321.1.2.3.3.11.11.3.1.2
VLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured. VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list exampleh <1>, <1,3>, <1,5,6~10>.
OBJECT-TYPE    
  DisplayString  

fwUpgradeVersion 1.1.6321.1.2.3.3.11.14.1
Configure the target firmware version that will be upgraded.
OBJECT-TYPE    
  STRING  

fwUpgradeCheck 1.1.6321.1.2.3.3.11.14.2
Enable/disable firmware upgrade version checking feature.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fwUpgradeStatus 1.1.6321.1.2.3.3.11.14.3
Display current firmware upgrade status.
OBJECT-TYPE    
  DisplayString  

delayedRebootTimer 1.1.6321.1.2.3.3.11.15.1
5~1800 secs, 0h reboot immediately.
OBJECT-TYPE    
  INTEGER  

delayedRebootRemainingTime 1.1.6321.1.2.3.3.11.15.2
Display the remaining time of scheduled reboot.
OBJECT-TYPE    
  INTEGER  

delayedRebootCancel 1.1.6321.1.2.3.3.11.15.3
cancel the scheduled reboot.
OBJECT-TYPE    
  INTEGER cancel(1)  

dhcpStats 1.1.6321.1.2.3.3.13.11
OBJECT IDENTIFIER    

paepvcStats 1.1.6321.1.2.3.3.13.12
OBJECT IDENTIFIER    

macStats 1.1.6321.1.2.3.3.13.13
OBJECT IDENTIFIER    

n1macStats 1.1.6321.1.2.3.3.13.15
OBJECT IDENTIFIER    

enetStats 1.1.6321.1.2.3.3.13.16
OBJECT IDENTIFIER    

vdslStats 1.1.6321.1.2.3.3.13.17
OBJECT IDENTIFIER    

macffStats 1.1.6321.1.2.3.3.13.19
OBJECT IDENTIFIER    

adslStats 1.1.6321.1.2.3.3.13.20
OBJECT IDENTIFIER    

igmpQueryCntTotal 1.1.6321.1.2.3.3.13.1
The total number of IGMP query messages received.
OBJECT-TYPE    
  Counter32  

igmpReportCntTotal 1.1.6321.1.2.3.3.13.2
The total number of IGMP report messages received.
OBJECT-TYPE    
  Counter32  

igmpLeaveCntTotal 1.1.6321.1.2.3.3.13.3
The total number of IGMP leave messages received.
OBJECT-TYPE    
  Counter32  

igmpNumOfActiveGroups 1.1.6321.1.2.3.3.13.4
The total number of IGMP learned groups.
OBJECT-TYPE    
  INTEGER  

igmpGroupTable 1.1.6321.1.2.3.3.13.5
This table includes igmp group information.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpGroupEntry

igmpGroupEntry 1.1.6321.1.2.3.3.13.5.1
An entry in igmpGroupTable.
OBJECT-TYPE    
  IgmpGroupEntry  

igmpGroupIp 1.1.6321.1.2.3.3.13.5.1.1
igmp group IP
OBJECT-TYPE    
  IpAddress  

igmpGroupvid 1.1.6321.1.2.3.3.13.5.1.2
vlan id
OBJECT-TYPE    
  INTEGER  

igmpGroupnumberOfMembers 1.1.6321.1.2.3.3.13.5.1.3
number Of Members
OBJECT-TYPE    
  INTEGER  

igmpGroupMemberPorts 1.1.6321.1.2.3.3.13.5.1.4
Group Member Ports
OBJECT-TYPE    
  PortList  

igmpGroupPortTable 1.1.6321.1.2.3.3.13.6
This table includes igmp Group port information.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpGroupPortEntry

igmpGroupPortEntry 1.1.6321.1.2.3.3.13.6.1
An entry in igmpGroupPortTable.
OBJECT-TYPE    
  IgmpGroupPortEntry  

igmpGroupPortIp 1.1.6321.1.2.3.3.13.6.1.1
Igmp Group IP
OBJECT-TYPE    
  IpAddress  

igmpGroupPortvid 1.1.6321.1.2.3.3.13.6.1.2
Igmp Group vid
OBJECT-TYPE    
  INTEGER  

igmpGroupV2Table 1.1.6321.1.2.3.3.13.7
A table that displays IGMP learned group member information.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpGroupV2Entry

igmpGroupV2Entry 1.1.6321.1.2.3.3.13.7.1
An entry of igmpGroupV2Table.
OBJECT-TYPE    
  IgmpGroupV2Entry  

igmpGroupV2Vid 1.1.6321.1.2.3.3.13.7.1.1
The IGMP group VLAN ID.
OBJECT-TYPE    
  VlanIndex  

igmpGroupV2Ip 1.1.6321.1.2.3.3.13.7.1.2
The multicast IP address.
OBJECT-TYPE    
  IpAddress  

igmpGroupV2NumOfMembers 1.1.6321.1.2.3.3.13.7.1.3
The number of member ports in the group.
OBJECT-TYPE    
  INTEGER  

igmpGroupV2MemberPorts 1.1.6321.1.2.3.3.13.7.1.4
The member port list of the group.
OBJECT-TYPE    
  PortList  

igmpGroupPortV2Table 1.1.6321.1.2.3.3.13.8
A table that displays IGMP joined groups in this port.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpGroupPortV2Entry

igmpGroupPortV2Entry 1.1.6321.1.2.3.3.13.8.1
An entry of igmpGroupPortV2Table.
OBJECT-TYPE    
  IgmpGroupPortV2Entry  

igmpGroupPortV2Vid 1.1.6321.1.2.3.3.13.8.1.1
The IGMP group VLAN ID.
OBJECT-TYPE    
  VlanIndex  

igmpGroupPortV2Ip 1.1.6321.1.2.3.3.13.8.1.2
The multicast IP address.
OBJECT-TYPE    
  IpAddress  

igmpGroupPortV2SourceIp 1.1.6321.1.2.3.3.13.8.1.3
The source IP address that joins the IGMP group.
OBJECT-TYPE    
  IpAddress  

igmpPortCtrlPduTable 1.1.6321.1.2.3.3.13.9
A table that displays IGMP related counter values in this port.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpPortCtrlPduEntry

igmpPortCtrlPduEntry 1.1.6321.1.2.3.3.13.9.1
An entry of igmpPortCtrlPduTable.
OBJECT-TYPE    
  IgmpPortCtrlPduEntry  

igmpPortCtrlPduQueryCnt 1.1.6321.1.2.3.3.13.9.1.1
The total number of IGMP query messages received in this port.
OBJECT-TYPE    
  Counter32  

igmpPortCtrlPduReportCnt 1.1.6321.1.2.3.3.13.9.1.2
The total number of IGMP report messages received in this port.
OBJECT-TYPE    
  Counter32  

igmpPortCtrlPduLeaveCnt 1.1.6321.1.2.3.3.13.9.1.3
The total number of IGMP leave messages received in this port.
OBJECT-TYPE    
  Counter32  

igmpPortNumOfActiveGroups 1.1.6321.1.2.3.3.13.9.1.4
The total number of active IGMP groups in this port.
OBJECT-TYPE    
  INTEGER  

igmpPortCtrlAuditLeaveCnt 1.1.6321.1.2.3.3.13.9.1.5
The total number of groups left by audit query.
OBJECT-TYPE    
  Counter32  

vdslLineStatsTable 1.1.6321.1.2.3.3.13.17.2
The table displays VDSL line statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    VdslLineStatsEntry

vdslLineStatsEntry 1.1.6321.1.2.3.3.13.17.2.1
An entry of vdslLineStatsTable.
OBJECT-TYPE    
  VdslLineStatsEntry  

vdslLineStatsVtucBits1 1.1.6321.1.2.3.3.13.17.2.1.1
The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucBits2 1.1.6321.1.2.3.3.13.17.2.1.2
The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucBits3 1.1.6321.1.2.3.3.13.17.2.1.3
The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucBits4 1.1.6321.1.2.3.3.13.17.2.1.4
The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVturBits1 1.1.6321.1.2.3.3.13.17.2.1.5
The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVturBits2 1.1.6321.1.2.3.3.13.17.2.1.6
The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVturBits3 1.1.6321.1.2.3.3.13.17.2.1.7
The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVturBits4 1.1.6321.1.2.3.3.13.17.2.1.8
The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucGain1 1.1.6321.1.2.3.3.13.17.2.1.9
The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucGain2 1.1.6321.1.2.3.3.13.17.2.1.10
The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucGain3 1.1.6321.1.2.3.3.13.17.2.1.11
The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
OBJECT-TYPE    
  STRING  

vdslLineStatsVtucGain4 1.1.6321.1.2.3.3.13.17.2.1.12
The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
OBJECT-TYPE    
  STRING