DellrPDU-MIB

File: DellrPDU-MIB.mib (94042 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises IpAddress Gauge
TimeTicks DisplayString OBJECT-TYPE
TRAP-TYPE

Defined Types

RpduEnableDisableType  
INTEGER disabled(1), enabled(2)    

RpduNormalAlarmType  
INTEGER normal(1), alarm(2)    

RpduCommNoneOKLostType  
INTEGER notInstalled(1), commsOK(2), commsLost(3)    

RpduLowNormalNearOverloadType  
INTEGER lowLoad(1), normal(2), nearOverload(3), overload(4)    

RpduNotPBMinLowNrmlOHiMaxType  
INTEGER notPresent(1), belowMin(2), belowLow(3), normal(4), overHigh(5), overMax(6)    

RpduOtherToNonrecoverableType  
INTEGER other(1), unknown(2), ok(3), non-critical(4), critical(5), non-recoverable(6)    

RpduOutletPhaseLayoutType  
INTEGER seqPhase1ToNeutral(1), seqPhase2ToNeutral(2), seqPhase3ToNeutral(3), seqPhase1ToPhase2(4), seqPhase2ToPhase3(5), seqPhase3ToPhase1(6)    

RPDUIdentEntry  
SEQUENCE    
  rPDUIdentIndex INTEGER
  rPDUIdentNameD DisplayString
  rPDUIdentLocation DisplayString
  rPDUIdentHardwareRevD DisplayString
  rPDUIdentFirmwareRevD DisplayString
  rPDUIdentDateOfManufactureD DisplayString
  rPDUIdentModelNumberD DisplayString
  rPDUIdentSerialNumberD DisplayString

RPDUDeviceStatusEntry  
SEQUENCE    
  rPDUDeviceStatusIndex INTEGER
  rPDUDeviceStatusName DisplayString
  rPDUDeviceStatusPower INTEGER
  rPDUDeviceStatusEnergy INTEGER
  rPDUDeviceStatusCommandPending INTEGER
  rPDUDeviceStatusLoadState INTEGER

RPDUDeviceConfigEntry  
SEQUENCE    
  rPDUDeviceConfigIndex INTEGER
  rPDUDeviceConfigName DisplayString
  rPDUDeviceConfigLocation DisplayString
  rPDUDeviceConfigColdstartDelay INTEGER
  rPDUDeviceCfgLowLoadPwrThresh INTEGER
  rPDUDeviceCfgNerOvloadPwrThresh INTEGER
  rPDUDeviceCfgOverloadPwrThresh INTEGER
  rPDUDeviceConfigPowerHeadroom INTEGER
  rPDUDeviceConfigPeakPower INTEGER
  rPDUDeviceCfgPeakPwrStartTime DisplayString
  rPDUDeviceConfigPeakPwrCapTime DisplayString
  rPDUDeviceCfgPeakPowerHeadroom INTEGER
  rPDUDeviceCfgEnergyStartTime DisplayString

RPDUDevicePropertiesEntry  
SEQUENCE    
  rPDUDevicePropertiesIndex INTEGER
  rPDUDevicePropertiesName DisplayString
  rPDUDevicePropertiesNumOutlets INTEGER
  rPDUDevicePropertiesNumSwdOuts INTEGER
  rPDUDevicePropertiesNumMtrdOuts INTEGER
  rPDUDevicePropertiesNumPhases INTEGER
  rPDUDevicePropertiesNumBreakers INTEGER
  rPDUDevicePropertiesMaxCurntRtg INTEGER
  rPDUDevicePropertiesOutlayout INTEGER

RPDUDeviceControlEntry  
SEQUENCE    
  rPDUDeviceControlIndex INTEGER
  rPDUDeviceControlName DisplayString
  rPDUDeviceControlCommand INTEGER

RPDUPhaseStatusEntry  
SEQUENCE    
  rPDUPhaseStatusIndex INTEGER
  rPDUPhaseStatusNumber INTEGER
  rPDUPhaseStatusLoadState INTEGER
  rPDUPhaseStatusCurrent INTEGER
  rPDUPhaseStatusVoltage INTEGER
  rPDUPhaseStatusPower INTEGER

RPDUPhaseConfigEntry  
SEQUENCE    
  rPDUPhaseConfigIndex INTEGER
  rPDUPhaseConfigNumber INTEGER
  rPDUPhaseCfgOverloadRestriction INTEGER
  rPDUPhCfgLowLoadCurntThreshold INTEGER
  rPDUPhCfgNerOverloadCurntThresh INTEGER
  rPDUPhCfgOverloadCurntThreshold INTEGER

RPDUOutletSwitchedStatusEntry  
SEQUENCE    
  rPDUOutletSwitchedStatusIndex INTEGER
  rPDUOutletSwitchedStatusNumber INTEGER
  rPDUOutletSwitchedStatusName DisplayString
  rPDUOutletSwitchedStatusState INTEGER
  rPDUOutletSwitchedStatCmdPnding INTEGER
  rPDUOutletSwitchedStatPhLayout RpduOutletPhaseLayoutType

RPDUOutletSwitchedConfigEntry  
SEQUENCE    
  rPDUOutletSwitchedConfigIndex INTEGER
  rPDUOutletSwitchedConfigNumber INTEGER
  rPDUOutletSwitchedConfigName DisplayString
  rPDUOutSwitchedCfgPowerOnTime INTEGER
  rPDUOutSwitchedCfgPowerOffTime INTEGER
  rPDUOutSwtchedCfgRebootDuration INTEGER

RPDUOutletSwitchedControlEntry  
SEQUENCE    
  rPDUOutletSwitchedControlIndex INTEGER
  rPDUOutletSwitchedControlNumber INTEGER
  rPDUOutletSwitchedControlName DisplayString
  rPDUOutletSwitchedControlCmd INTEGER

RPDUOutletMeteredStatusEntry  
SEQUENCE    
  rPDUOutletMeteredStatusIndex INTEGER
  rPDUOutletMeteredStatusNumber INTEGER
  rPDUOutletMeteredStatusName DisplayString
  rPDUOutletMeteredStatusLayout INTEGER
  rPDUOutMeteredStatPowerRating INTEGER
  rPDUOutletMeteredStatusCurrent INTEGER
  rPDUOutletMeteredStatusEnergy INTEGER
  rPDUOutletMeteredStatusPower INTEGER
  rPDUOutletMeteredStatPeakPower INTEGER
  rPDUOutMeteredStatPeakPwrTime DisplayString
  rPDUOutMeteredStatusLoadState INTEGER

RPDUOutletMeteredConfigEntry  
SEQUENCE    
  rPDUOutletMeteredConfigIndex INTEGER
  rPDUOutletMeteredConfigNumber INTEGER
  rPDUOutletMeteredConfigName DisplayString
  rPDUOutMtredCfgLowLdCurntThresh INTEGER
  rPDUOutMtrdCfgNrOvdCurntThresh INTEGER
  rPDUOutMtredCfgOvrldCurntThresh INTEGER

RPDUSensorStatusEntry  
SEQUENCE    
  rPDUSensorStatusIndex INTEGER
  rPDUSensorStatusName DisplayString
  rPDUSensorStatusType INTEGER

RPDUSensorTempStatusEntry  
SEQUENCE    
  rPDUSensorTempStatusIndex INTEGER
  rPDUSensorTempStatusName DisplayString
  rPDUSensorTempStatusCommStatus INTEGER
  rPDUSensorTempStatusTempF INTEGER
  rPDUSensorTempStatusTempC INTEGER
  rPDUSensorTempStatusAlarmStatus INTEGER

RPDUSensorTempConfigEntry  
SEQUENCE    
  rPDUSensorTempConfigIndex INTEGER
  rPDUSensorTempConfigName DisplayString
  rPDUSensorTempCfgTempMaxThreshF INTEGER
  rPDUSnsorTempCfgTempHighThreshF INTEGER
  rPDUSnsorTempCfgTempHysteresisF INTEGER
  rPDUSensorTempCfgTempMaxThreshC INTEGER
  rPDUSnsorTempCfgTempHighThreshC INTEGER
  rPDUSnsorTempCfgTempHysteresisC INTEGER
  rPDUSnsorTempCfgAlarmGeneration INTEGER

RPDUSensorHumidityStatusEntry  
SEQUENCE    
  rPDUSensorHumidityStatusIndex INTEGER
  rPDUSensorHumidityStatusName DisplayString
  rPDUSnsorHumidityStatCommStatus INTEGER
  rPDUSnsorHumStatRelativeHumdity INTEGER
  rPDUSnsorHumStatusAlarmStatus INTEGER

RPDUSensorHumidityConfigEntry  
SEQUENCE    
  rPDUSensorHumidityConfigIndex INTEGER
  rPDUSensorHumidityConfigName DisplayString
  rPDUSnsorHumCfgHumdityLowThresh INTEGER
  rPDUSnsorHumCfgHumdityMinThresh INTEGER
  rPDUSnsorHumCfgHumdtyHysteresis INTEGER
  rPDUSnsorHumCfgAlarmGeneration INTEGER

RPDUSensorDiscreteStatusEntry  
SEQUENCE    
  rPDUSensorDiscreteStatusIndex INTEGER
  rPDUSensorDiscreteStatusName DisplayString
  rPDUSnsorDiscreteStatCurntState INTEGER
  rPDUSnsorDiscreteStatAlarmState INTEGER

RPDUSensorDiscreteConfigEntry  
SEQUENCE    
  rPDUSensorDiscreteConfigIndex INTEGER
  rPDUSensorDiscreteConfigName DisplayString
  rPDUSnsorDiscreteCfgNormalState INTEGER
  rPDUSnsorDiscrteAlarmGeneration INTEGER

Defined Values

dell 1.3.6.1.4.1.674
OBJECT IDENTIFIER    

pdu 1.3.6.1.4.1.674.10903
OBJECT IDENTIFIER    

pdusub 1.3.6.1.4.1.674.10903.200
OBJECT IDENTIFIER    

software 1.3.6.1.4.1.674.10903.200.1
OBJECT IDENTIFIER    

hardware 1.3.6.1.4.1.674.10903.200.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.674.10903.200.3
OBJECT IDENTIFIER    

sysRPDUV1 1.3.6.1.4.1.674.10903.200.3.1
OBJECT IDENTIFIER    

productID 1.3.6.1.4.1.674.10903.200.2.100
OBJECT IDENTIFIER    

productIDDisplayName 1.3.6.1.4.1.674.10903.200.2.100.1
Name of this product for display purposes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

productIDDescription 1.3.6.1.4.1.674.10903.200.2.100.2
A short description of this product.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

productIDVendor 1.3.6.1.4.1.674.10903.200.2.100.3
The name of the product manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productIDVersion 1.3.6.1.4.1.674.10903.200.2.100.4
The hardware version of this product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productIDBuildNumber 1.3.6.1.4.1.674.10903.200.2.100.5
The software build number of the product populating the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productIDURL 1.3.6.1.4.1.674.10903.200.2.100.6
The URL of the Web-based application to manage this device, should the device provide one.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productIDDeviceNetworkName 1.3.6.1.4.1.674.10903.200.2.100.7
Operating system-specific computer name if product SNMP service is hosted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

productStatus 1.3.6.1.4.1.674.10903.200.2.110
OBJECT IDENTIFIER    

productStatusGlobalStatus 1.3.6.1.4.1.674.10903.200.2.110.1
The current status of the product. This is a summary of the status for the entire product including any metered devices. The SNMP monitor performs a get to retrieve additional data when this status is abnormal. Valid values 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduOtherToNonrecoverableType  

productStatusLastGlobalStatus 1.3.6.1.4.1.674.10903.200.2.110.2
The status before the current status which induced an initiative to issue a global status change trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduOtherToNonrecoverableType  

productStatusTimeStamp 1.3.6.1.4.1.674.10903.200.2.110.3
The last time that the SNMP table geometries changed or attribute data was significantly updated. Management applications use this OID to trigger a refresh of data acquired from the MIB. This time should be a relative timestamp, for example, the value of MIB II SysUpTime when the values are updated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

productStatusRESERVED1 1.3.6.1.4.1.674.10903.200.2.110.4
RESERVED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productStatusRESERVED2 1.3.6.1.4.1.674.10903.200.2.110.5
RESERVED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productStatusRESERVED3 1.3.6.1.4.1.674.10903.200.2.110.6
RESERVED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDU 1.3.6.1.4.1.674.10903.200.2.200
OBJECT IDENTIFIER    

rPDUIdentD 1.3.6.1.4.1.674.10903.200.2.200.100
OBJECT IDENTIFIER    

rPDUIdentTableSize 1.3.6.1.4.1.674.10903.200.2.200.100.1
The number of connected Rack PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUIdentTable 1.3.6.1.4.1.674.10903.200.2.200.100.2
A table of Rack PDU identification data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUIdentEntry

rPDUIdentEntry 1.3.6.1.4.1.674.10903.200.2.200.100.2.1
Identification data from the Rack PDU being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUIdentEntry  

rPDUIdentIndex 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.1
The index to the Rack PDU identification table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUIdentNameD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.2
A user-defined string identifying the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUIdentLocation 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.3
A user-defined string identifying the location of the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUIdentHardwareRevD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.4
The Rack PDU hardware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUIdentFirmwareRevD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.5
The Rack PDU firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUIdentDateOfManufactureD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.6
The date the Rack PDU was manufactured in mm/dd/yyyy format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUIdentModelNumberD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.7
The Rack PDU model number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUIdentSerialNumberD 1.3.6.1.4.1.674.10903.200.2.200.100.2.1.8
The Rack PDU serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUDevice 1.3.6.1.4.1.674.10903.200.2.200.110
OBJECT IDENTIFIER    

rPDUDeviceTableSize 1.3.6.1.4.1.674.10903.200.2.200.110.1
The number of connected Rack PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceStatusTable 1.3.6.1.4.1.674.10903.200.2.200.110.2
A table of Rack PDU status information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUDeviceStatusEntry

rPDUDeviceStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.110.2.1
Status information from the Rack PDU being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUDeviceStatusEntry  

rPDUDeviceStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.1
The index to the Rack PDU status table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceStatusName 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.2
A user-defined string identifying the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUDeviceStatusPower 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.3
The power consumption of the Rack PDU load in 1/100 of KWatts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceStatusEnergy 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.4
A user resettable energy meter measuring Rack PDU load energy consumption in tenths of kilowatt-hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceStatusCommandPending 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.5
Indicates whether the device is processing a pending command. If the commandPendingUnknown (3) value is returned, all devices receiving power from the Rack PDU should be shut down. The Rack PDU's power should then be cycled to clear this condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER commandPending(1), noCommandPending(2), commandPendingUnknown(3)  

rPDUDeviceStatusLoadState 1.3.6.1.4.1.674.10903.200.2.200.110.2.1.6
Indicates the present load status of the Rack PDU Device being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduLowNormalNearOverloadType  

rPDUDeviceConfigTable 1.3.6.1.4.1.674.10903.200.2.200.110.3
A table of Rack PDU configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUDeviceConfigEntry

rPDUDeviceConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.110.3.1
Configuration data from the Rack PDU being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUDeviceConfigEntry  

rPDUDeviceConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.1
The index to the Rack PDU table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceConfigName 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.2
A user-defined string identifying the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUDeviceConfigLocation 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.3
The Location of the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUDeviceConfigColdstartDelay 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.4
The amount of delay, measured in seconds, between when power is provided to the Rack PDU and when the Rack PDU provides basic master power to the outlets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUDeviceCfgLowLoadPwrThresh 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.5
The user-defined low power draw alarm threshold, measured in tenths of kilowatts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUDeviceCfgNerOvloadPwrThresh 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.6
The user-defined near power overload threshold, measured in tenths of kilowatts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUDeviceCfgOverloadPwrThresh 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.7
The user-defined power overload threshold, measured in tenths of kilowatts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUDeviceConfigPowerHeadroom 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.8
The amount of input power that is available to the connected devices in hundredths of kilowatt-hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceConfigPeakPower 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.9
The highest input power level recorded by the connected devices in hundredths of kilowatt-hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceCfgPeakPwrStartTime 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.10
The time, in hh:mm:ss, when the device started recording the highest input power level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUDeviceConfigPeakPwrCapTime 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.11
The time, in hh:mm:ss, when the highest input power level was recorded by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUDeviceCfgPeakPowerHeadroom 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.12
The highest level of input power that is available to the connected devices in hundredths of kilowatt-hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceCfgEnergyStartTime 1.3.6.1.4.1.674.10903.200.2.200.110.3.1.13
The time, in hh:mm:ss, when the device started recording the input energy level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUDevicePropertiesTable 1.3.6.1.4.1.674.10903.200.2.200.110.4
A table of Rack PDU properties.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUDevicePropertiesEntry

rPDUDevicePropertiesEntry 1.3.6.1.4.1.674.10903.200.2.200.110.4.1
Properties of the Rack PDU being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUDevicePropertiesEntry  

rPDUDevicePropertiesIndex 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.1
The index to the Rack PDU properties table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesName 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.2
A user-defined string identifying the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUDevicePropertiesNumOutlets 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.3
The number of outlets on the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesNumSwdOuts 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.4
The number of switched outlets on the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesNumMtrdOuts 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.5
The number of metered outlets on the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesNumPhases 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.6
The number of phases present in the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesNumBreakers 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.7
The number of breakers present in the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesMaxCurntRtg 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.8
The maximum current rating, measured in Amps, for the Rack PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDevicePropertiesOutlayout 1.3.6.1.4.1.674.10903.200.2.200.110.4.1.9
The phase wiring for the Rack PDU outlets. PhaseToNeutral and PhaseToPhase: outlets wired consecutively; PhaseToNeutralGrouped and PhaseToPhaseGrouped: groups of outlets wired consecutively.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER phaseToNeutral(1), phaseToPhase(2), phaseToNeutralGrouped(3), phaseToPhaseGrouped(4)  

rPDUDeviceControlTable 1.3.6.1.4.1.674.10903.200.2.200.110.5
A table of Rack PDU control data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUDeviceControlEntry

rPDUDeviceControlEntry 1.3.6.1.4.1.674.10903.200.2.200.110.5.1
Control data from the Rack PDU being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUDeviceControlEntry  

rPDUDeviceControlIndex 1.3.6.1.4.1.674.10903.200.2.200.110.5.1.1
The index to the Rack PDU control table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUDeviceControlName 1.3.6.1.4.1.674.10903.200.2.200.110.5.1.2
A user-defined string identifying the Rack PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUDeviceControlCommand 1.3.6.1.4.1.674.10903.200.2.200.110.5.1.3
Setting this OID to turnAllOnNow (1) will turn all outlets on immediately. Setting this OID to turnAllOnSequence (2) will turn all outlets on as defined by each outlet's sPDUOutletPowerOnTime OID value. Setting this OID to turnAllOff (3) will turn all outlets off immediately. Setting this OID to rebootAllNow (4) will reboot all outlets immediately. Setting this OID to rebootAllSequence (5) reboots all outlets, with power returned to the outlets in the sequence defined by each outlet's rPDUOutSwitchedCfgPowerOnTime OID value. Setting this OID to rebootAllSequence (5) will cause a turnAllOffSequence to be performed. Once all outlets are off, the Rack PDU will then delay the rPDUOutSwtchedCfgRebootDuration OID time, and then perform a turnAllOnSequence. Setting this OID to turnAllOffSequence (7) will turn all outlets off as defined by each outlet's rPDUOutSwitchedCfgPowerOffTime OID value. Getting this OID will return the noCommand (6) value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER turnAllOnNow(1), turnAllOnSequence(2), turnAllOffNow(3), rebootAllNow(4), rebootAllSequence(5), noCommand(6), turnAllOffSequence(7)  

rPDUPhase 1.3.6.1.4.1.674.10903.200.2.200.120
OBJECT IDENTIFIER    

rPDUPhaseTableSize 1.3.6.1.4.1.674.10903.200.2.200.120.1
The number of connected Rack PDU phases.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseStatusTable 1.3.6.1.4.1.674.10903.200.2.200.120.2
A table of Rack PDU phase status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUPhaseStatusEntry

rPDUPhaseStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.120.2.1
Status data from the currently queried Rack PDU phase.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUPhaseStatusEntry  

rPDUPhaseStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.1
The index to the Rack PDU phase status table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseStatusNumber 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.2
The numeric phase ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseStatusLoadState 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.3
Indicates the present load status of the Rack PDU phase being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduLowNormalNearOverloadType  

rPDUPhaseStatusCurrent 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.4
Indicates the current draw, in tenths of Amps, of the load on the Rack PDU phase being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseStatusVoltage 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.5
Indicates the Voltage, in Volts, of the Rack PDU phase being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseStatusPower 1.3.6.1.4.1.674.10903.200.2.200.120.2.1.6
Indicates the load power, in hundredths of kilowatts, consumed on the Rack PDU phase being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseConfigTable 1.3.6.1.4.1.674.10903.200.2.200.120.3
A table of Rack PDU phase configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUPhaseConfigEntry

rPDUPhaseConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.120.3.1
Configuration data from the currently queried Rack PDU phase.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUPhaseConfigEntry  

rPDUPhaseConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.1
The index to the Rack PDU phase configuration table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseConfigNumber 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.2
The numeric phase ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUPhaseCfgOverloadRestriction 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.3
This OID controls the behavior of a Switched Rack PDU phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allow the outlets on the corresponding phase to turn on. Setting this OID to restrictOnNearOverload (2) will not allow outlets on the corresponding phase to turn on if the rPDULoadConfigNearOverloadThreshold OID is exceeded. Setting this OID to restrictOnOverload (3) will not allow outlets on the corresponding phase to turn on if the rPDULoadConfigOverloadThreshold OID is exceeded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER alwaysAllowTurnON(1), restrictOnNearOverload(2), restrictOnOverload(3)  

rPDUPhCfgLowLoadCurntThreshold 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.4
The user-defined threshold for low phase current load, in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUPhCfgNerOverloadCurntThresh 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.5
The user-defined near phase overload warning threshold in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUPhCfgOverloadCurntThreshold 1.3.6.1.4.1.674.10903.200.2.200.120.3.1.6
The user-defined phase overload current threshold in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutlet 1.3.6.1.4.1.674.10903.200.2.200.130
OBJECT IDENTIFIER    

rPDUOutletSwitched 1.3.6.1.4.1.674.10903.200.2.200.130.1
OBJECT IDENTIFIER    

rPDUOutletSwitchedTableSize 1.3.6.1.4.1.674.10903.200.2.200.130.1.1
The number of switched outlets on connected Rack PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedStatusTable 1.3.6.1.4.1.674.10903.200.2.200.130.1.2
A table of Rack PDU switched outlet status information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUOutletSwitchedStatusEntry

rPDUOutletSwitchedStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1
Status information for the currently-queried Rack PDU switched outlet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUOutletSwitchedStatusEntry  

rPDUOutletSwitchedStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.1
The index to the Rack PDU switched outlet status information table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedStatusNumber 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.2
The numeric switched outlet ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedStatusName 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.3
The user-defined switched outlet ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUOutletSwitchedStatusState 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.4
Indicates the present status of the Rack PDU switched outlet being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), unknown(3)  

rPDUOutletSwitchedStatCmdPnding 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.5
Indicates whether the device is processing a command for this outlet. If the commandPendingUnknown (3) value is returned, all devices receiving power from the Rack PDU should be shut down. The Rack PDU's power should then be cycled to clear this condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER commandPending(1), noCommandPending(2), commandPendingUnknown(3)  

rPDUOutletSwitchedStatPhLayout 1.3.6.1.4.1.674.10903.200.2.200.130.1.2.1.6
Phase description of the currently-queried Rack PDU switched outlet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduOutletPhaseLayoutType  

rPDUOutletSwitchedConfigTable 1.3.6.1.4.1.674.10903.200.2.200.130.1.3
A table of Rack PDU switched outlet configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUOutletSwitchedConfigEntry

rPDUOutletSwitchedConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1
Configuration data from the currently-queried Rack PDU switched outlet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUOutletSwitchedConfigEntry  

rPDUOutletSwitchedConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.1
The index to the Rack PDU switched outlet configuration table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedConfigNumber 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.2
The numeric switched outlet ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedConfigName 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.3
The user-defined switched outlet ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUOutSwitchedCfgPowerOnTime 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.4
The amount of time, in seconds, between when power is provided to the Rack PDU and when this switched outlet starts providing power.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutSwitchedCfgPowerOffTime 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.5
The amount of time, in seconds, this outlet will delay turning off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutSwtchedCfgRebootDuration 1.3.6.1.4.1.674.10903.200.2.200.130.1.3.1.6
After turning off power during a reboot sequence, the amount of time, in seconds, to wait before turning on power to this outlet again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedControlTable 1.3.6.1.4.1.674.10903.200.2.200.130.1.4
A table of Rack PDU switched outlet control data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUOutletSwitchedControlEntry

rPDUOutletSwitchedControlEntry 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1
Control data for the currently-queried Rack PDU switched outlet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUOutletSwitchedControlEntry  

rPDUOutletSwitchedControlIndex 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.1
The index to the Rack PDU switched outlet control data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedControlNumber 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.2
The numeric switched outlet ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletSwitchedControlName 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.3
The user-defined switched outlet ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUOutletSwitchedControlCmd 1.3.6.1.4.1.674.10903.200.2.200.130.1.4.1.4
Getting this variable will return the outlet state. If the outlet is on, the outletOn (1) value will be returned. If the outlet is off, the outletOff (2) value will be returned. If the state of the outlet cannot be determined, the outletUnknown (4) value will be returned. If the outletUnknown condition should occur, all devices receiving power from the PDU should be shut down. The PDU's power should then be cycled to clear this condition. Setting this variable to outletOn (1) will turn the outlet on. Setting this variable to outletOff (2) will turn the outlet off. Setting this variable to outletReboot (3) will reboot the outlet. Setting this variable to outletOnWithDelay (5) will turn the outlet on after the rPDUOutSwitchedCfgPowerOnTime OID has elapsed. Setting this variable to outletOffWithDelay (6) will turn the outlet off after the rPDUOutSwitchedCfgPowerOffTime OID has elapsed. Setting this variable to outletRebootWithDelay (7) will turn the outlet off after the rPDUOutSwitchedCfgPowerOffTime OID has elapsed, wait the rPDUOutSwtchedCfgRebootDuration OID time, then turn the outlet back on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outletOn(1), outletOff(2), outletReboot(3), outletUnknown(4), outletOnWithDelay(5), outletOffWithDelay(6), outletRebootWithDelay(7)  

rPDUOutletMetered 1.3.6.1.4.1.674.10903.200.2.200.130.2
OBJECT IDENTIFIER    

rPDUOutletMeteredTableSize 1.3.6.1.4.1.674.10903.200.2.200.130.2.1
The number of metered outlets on connected Rack PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusTable 1.3.6.1.4.1.674.10903.200.2.200.130.2.2
A table of Rack PDU metered outlet status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUOutletMeteredStatusEntry

rPDUOutletMeteredStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1
Status data from the currently-queried Rack PDU metered outlet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUOutletMeteredStatusEntry  

rPDUOutletMeteredStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.1
The index to the Rack PDU metered status table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusNumber 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.2
The numeric metered outlet ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusName 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.3
The user-defined metered outlet ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUOutletMeteredStatusLayout 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.4
Phase description of currently queried Rack PDU metered outlet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduOutletPhaseLayoutType  

rPDUOutMeteredStatPowerRating 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.5
The power rating for the currently queried Rack PDU metered outlet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusCurrent 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.6
Indicates the current draw, in Amps, of the load on the Rack PDU outlet being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusEnergy 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.7
A user resettable energy meter measuring Rack PDU load energy consumption in kilowatt-hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatusPower 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.8
Indicates the power draw of the load on the Rack PDU outlet being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredStatPeakPower 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.9
The highest power level recorded by the currently queried Rack PDU metered outlet, in kilowatts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutMeteredStatPeakPwrTime 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.10
Indicates the date and time that peak power consumption occured
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUOutMeteredStatusLoadState 1.3.6.1.4.1.674.10903.200.2.200.130.2.2.1.11
Indicates the present load status of the Rack PDU Outlet being queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduLowNormalNearOverloadType  

rPDUOutletMeteredConfigTable 1.3.6.1.4.1.674.10903.200.2.200.130.2.4
A table of Rack PDU metered outlet configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUOutletMeteredConfigEntry

rPDUOutletMeteredConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1
Configuration data from the currently queried Rack PDU metered outlet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUOutletMeteredConfigEntry  

rPDUOutletMeteredConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.1
The index to the Rack PDU metered outlet configuration table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredConfigNumber 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.2
The numeric switched outlet ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUOutletMeteredConfigName 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.3
The user-defined metered outlet ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUOutMtredCfgLowLdCurntThresh 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.4
The user-defined low load outlet current threshold, in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutMtrdCfgNrOvdCurntThresh 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.5
The user-defined near outlet overload warning threshold, in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutMtredCfgOvrldCurntThresh 1.3.6.1.4.1.674.10903.200.2.200.130.2.4.1.6
The user-defined outlet overload current threshold, in Amps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUOutMeteredEnergyStartTime 1.3.6.1.4.1.674.10903.200.2.200.130.2.5
The time, in hh:mm:ss, when the currently queried Rack PDU metered outlet started recording the input energy level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUOutMeteredPeakPwrStartTime 1.3.6.1.4.1.674.10903.200.2.200.130.2.6
The time, in hh:mm:ss, when the currently queried Rack PDU metered outlet started recording the highest level of input power that is available to the connected device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rPDUPowerSupply 1.3.6.1.4.1.674.10903.200.2.200.140
OBJECT IDENTIFIER    

rPDUPowerSupplyAlarmD 1.3.6.1.4.1.674.10903.200.2.200.140.1
Getting this OID will return the status of the power supply alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER allAvailablePowerSuppliesOK(1), powerSupplyFailed(2)  

rPDUPowerSupplyVoltage 1.3.6.1.4.1.674.10903.200.2.200.140.2
The voltage provided by the power supply in tenths of volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensor 1.3.6.1.4.1.674.10903.200.2.200.150
OBJECT IDENTIFIER    

rPDUSensorStatus 1.3.6.1.4.1.674.10903.200.2.200.150.1
OBJECT IDENTIFIER    

rPDUSensorStatusTableSize 1.3.6.1.4.1.674.10903.200.2.200.150.1.1
The number of connected temperature sensors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorStatusTable 1.3.6.1.4.1.674.10903.200.2.200.150.1.2
A table of temperature sensor status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorStatusEntry

rPDUSensorStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.150.1.2.1
Status information from the temperature sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorStatusEntry  

rPDUSensorStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.150.1.2.1.1
The index to the status data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorStatusName 1.3.6.1.4.1.674.10903.200.2.200.150.1.2.1.2
The user-defined sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSensorStatusType 1.3.6.1.4.1.674.10903.200.2.200.150.1.2.1.3
The type of the sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), temperature(2), temperatureHumidity(3)  

rPDUSensorTemp 1.3.6.1.4.1.674.10903.200.2.200.150.2
OBJECT IDENTIFIER    

rPDUSensorTempTableSize 1.3.6.1.4.1.674.10903.200.2.200.150.2.1
The number of connected temperature sensors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempStatusTable 1.3.6.1.4.1.674.10903.200.2.200.150.2.2
A table of temperature sensor status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorTempStatusEntry

rPDUSensorTempStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1
Status information from the temperature sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorTempStatusEntry  

rPDUSensorTempStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.1
The index to the temperature status data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempStatusName 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.2
The user-defined temperature-humidity sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSensorTempStatusCommStatus 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.3
The communications status of the sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduCommNoneOKLostType  

rPDUSensorTempStatusTempF 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.4
The sensor temperature reading in tenths of degrees Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempStatusTempC 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.5
The sensor temperature reading in tenths of degrees Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempStatusAlarmStatus 1.3.6.1.4.1.674.10903.200.2.200.150.2.2.1.6
The alarm status of the sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduNotPBMinLowNrmlOHiMaxType  

rPDUSensorTempConfigTable 1.3.6.1.4.1.674.10903.200.2.200.150.2.3
A table of temperature-humidity sensor configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorTempConfigEntry

rPDUSensorTempConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1
Configuration data from the temperature-humidity sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorTempConfigEntry  

rPDUSensorTempConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.1
The index to the temperature-humidity sensor configuration data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempConfigName 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.2
The user-defined temperature-humidity sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSensorTempCfgTempMaxThreshF 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.3
The sensor maximum temperature alarm threshold in Fahrenheit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorTempCfgTempHighThreshF 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.4
The sensor high temperature warning alarm threshold in Fahrenheit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorTempCfgTempHysteresisF 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.5
The sensor temperature hysteresis setting in Fahrenheit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSensorTempCfgTempMaxThreshC 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.6
The sensor maximum temperature alarm threshold in Celsius.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorTempCfgTempHighThreshC 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.7
The sensor high temperature warning alarm threshold in Celsius.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorTempCfgTempHysteresisC 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.8
The sensor temperature hysteresis setting in Celsius.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorTempCfgAlarmGeneration 1.3.6.1.4.1.674.10903.200.2.200.150.2.3.1.9
Indicates whether the Temp Alarm Generation is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RpduEnableDisableType  

rPDUSensorHumidity 1.3.6.1.4.1.674.10903.200.2.200.150.3
OBJECT IDENTIFIER    

rPDUSensorHumidityTableSize 1.3.6.1.4.1.674.10903.200.2.200.150.3.1
The number of connected temperature-humidity sensors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorHumidityStatusTable 1.3.6.1.4.1.674.10903.200.2.200.150.3.2
A table of temperature-humidity sensor status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorHumidityStatusEntry

rPDUSensorHumidityStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1
Status information from the temperature-humidity sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorHumidityStatusEntry  

rPDUSensorHumidityStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1.1
The index to the temperature-humidity status data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorHumidityStatusName 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1.2
The user-defined temperature-humidity sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSnsorHumidityStatCommStatus 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1.3
The communications status of the sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduCommNoneOKLostType  

rPDUSnsorHumStatRelativeHumdity 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1.4
The sensor humidity reading in percent relative humidity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSnsorHumStatusAlarmStatus 1.3.6.1.4.1.674.10903.200.2.200.150.3.2.1.5
The alarm status of the sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduNotPBMinLowNrmlOHiMaxType  

rPDUSensorHumidityConfigTable 1.3.6.1.4.1.674.10903.200.2.200.150.3.3
A table of temperature-humidity sensor configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorHumidityConfigEntry

rPDUSensorHumidityConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1
Configuration data from the temperature-humidity sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorHumidityConfigEntry  

rPDUSensorHumidityConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.1
The index to the temperature-humidity sensor configuration data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorHumidityConfigName 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.2
The user-defined temperature-humidity sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSnsorHumCfgHumdityLowThresh 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.3
The sensor low humidity warning alarm threshold in percent relative humidity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorHumCfgHumdityMinThresh 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.4
The sensor minimum humidity alarm threshold in percent relative humidity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorHumCfgHumdtyHysteresis 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.5
The sensor humidity hysteresis setting in percent relative humidity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rPDUSnsorHumCfgAlarmGeneration 1.3.6.1.4.1.674.10903.200.2.200.150.3.3.1.6
Indicates whether the Humidity Alarm Generation is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RpduEnableDisableType  

rPDUSensorDiscrete 1.3.6.1.4.1.674.10903.200.2.200.150.4
OBJECT IDENTIFIER    

rPDUSensorDiscreteTableSize 1.3.6.1.4.1.674.10903.200.2.200.150.4.1
The number of connected discrete sensors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorDiscreteStatusTable 1.3.6.1.4.1.674.10903.200.2.200.150.4.2
A table of discrete sensor status data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorDiscreteStatusEntry

rPDUSensorDiscreteStatusEntry 1.3.6.1.4.1.674.10903.200.2.200.150.4.2.1
Status information from the discrete sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorDiscreteStatusEntry  

rPDUSensorDiscreteStatusIndex 1.3.6.1.4.1.674.10903.200.2.200.150.4.2.1.1
The index to the discrete sensor status data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorDiscreteStatusName 1.3.6.1.4.1.674.10903.200.2.200.150.4.2.1.2
The user-defined discrete sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSnsorDiscreteStatCurntState 1.3.6.1.4.1.674.10903.200.2.200.150.4.2.1.3
The current state of the discrete sensor, open, closed, or unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER open(1), closed(2), unknown(3)  

rPDUSnsorDiscreteStatAlarmState 1.3.6.1.4.1.674.10903.200.2.200.150.4.2.1.4
Indicates the alarm status of the discrete sensor input.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RpduNormalAlarmType  

rPDUSensorDiscreteConfigTable 1.3.6.1.4.1.674.10903.200.2.200.150.4.3
A table of discrete sensor configuration data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RPDUSensorDiscreteConfigEntry

rPDUSensorDiscreteConfigEntry 1.3.6.1.4.1.674.10903.200.2.200.150.4.3.1
Configuration data from the discrete sensor being queried.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RPDUSensorDiscreteConfigEntry  

rPDUSensorDiscreteConfigIndex 1.3.6.1.4.1.674.10903.200.2.200.150.4.3.1.1
The index to the discrete sensor configuration data table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rPDUSensorDiscreteConfigName 1.3.6.1.4.1.674.10903.200.2.200.150.4.3.1.2
The user-defined discrete sensor ID string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

rPDUSnsorDiscreteCfgNormalState 1.3.6.1.4.1.674.10903.200.2.200.150.4.3.1.3
Indicates the normal state of the discrete input contact.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

rPDUSnsorDiscrteAlarmGeneration 1.3.6.1.4.1.674.10903.200.2.200.150.4.3.1.4
Indicates whether Discrete Alarm Generation is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RpduEnableDisableType  

mtrapargsD 1.3.6.1.4.1.674.10903.200.2.200.160
OBJECT IDENTIFIER    

contactNumber 1.3.6.1.4.1.674.10903.200.2.200.160.1
This OID allows traps to be sent with an integer argument that may not be defined in the MIB. A get of this OID will return 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

outletNumber 1.3.6.1.4.1.674.10903.200.2.200.160.2
This OID allows traps to be sent with an integer argument that may not be defined in the MIB. A get of this OID will return 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mtrapargsString 1.3.6.1.4.1.674.10903.200.2.200.160.3
This OID allows traps to be sent with an octet string argument that may not be defined in the MIB. A get of this OID will return a NULL string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

phaseNumber 1.3.6.1.4.1.674.10903.200.2.200.160.4
This OID allows traps to be sent with an integer argument that may not be defined in the MIB. A get of this OID will return 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sensorNumber 1.3.6.1.4.1.674.10903.200.2.200.160.5
This OID allows traps to be sent with an integer argument that may not be defined in the MIB. A get of this OID will return 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

deviceNameD 1.3.6.1.4.1.674.10903.200.2.200.160.6
This OID allows traps to be sent with an octet string argument that may not be defined in the MIB. A get of this OID will return a NULL string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serialNumber 1.3.6.1.4.1.674.10903.200.2.200.160.7
This OID allows traps to be sent with an octet string argument that may not be defined in the MIB. A get of this OID will return a NULL string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

testTrapargsInteger 1.3.6.1.4.1.674.10903.200.2.200.160.8
This OID allows traps to be sent with an integer argument that may not be defined in the MIB. A get of this OID will return 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

events 1.3.6.1.4.1.674.10903.200.2.200.500
OBJECT IDENTIFIER    

deviceCommunicationLostCleared 1
INFORMATIONAL: Lost communication with device has been re-established. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceCommunicationLostSet 2
CRITICAL: Lost communication with device. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

componentCommLostCleared 3
INFORMATIONAL: Lost communication with an on board component has been re-established. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

componentCommLostSet 4
CRITICAL: Lost communication with an on board component. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

cANBusOffCleared 5
INFORMATIONAL: CAN bus off condition was cleared. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

canBusOffSet 6
MINOR: CAN bus off condition was set. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

powerSupplyFailureCleared 7
INFORMATIONAL: Unit's power supply voltage is no longer out of tolerance. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

powerSupplyFailureSet 8
CRITICAL: Unit's power supply voltage is out of tolerance. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

keypadButtonStuckCleared 9
INFORMATIONAL: Keypad button stuck has been cleared. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

keypadButtonStuckSet 10
MINOR: Keypad button stuck has been set. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

dryContactAbnormalCleared 11
INFORMATIONAL: Dry Contact is no longer in an abnormal state. The first argument is the serial number. The second argument is the device name. The third argument is the contact number.
TRAP-TYPE    

dryContactAbnormalSet 12
CRITICAL: Dry Contact has moved to an abnormal state. The first argument is the serial number. The second argument is the device name. The third argument is the contact number.
TRAP-TYPE    

deviceLowLoadCleared 13
INFORMATIONAL: Device load is no longer below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceLowLoadSet 14
MINOR: Device load has fallen below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceNearOverLoadCleared 15
INFORMATIONAL: Device load no longer exceeds the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceNearOverLoadSet 16
MINOR: Device load has exceeded the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceOverLoadCleared 17
INFORMATIONAL: Device load no longer exceeds the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

deviceOverLoadSet 18
CRITICAL: Device load has exceeded the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

phaseLowLoadCleared 19
INFORMATIONAL: Phase load is no longer below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

phaseLowLoadSet 20
MINOR: Phase load has fallen below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

phaseNearOverLoadCleared 21
INFORMATIONAL: Phase load no longer exceeds the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

phaseNearOverLoadSet 22
MINOR: Phase load has exceeded the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

phaseOverLoadCleared 23
INFORMATIONAL: Phase load no longer exceeds the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

phaseOverLoadSet 24
CRITICAL: Phase load has exceeded the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

outletLowLoadCleared 25
INFORMATIONAL: Outlet load is no longer below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletLowLoadSet 26
MINOR: Outlet load had fallen below the 'Low Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletNearOverLoadCleared 27
INFORMATIONAL: Outlet load no longer exceeds the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletNearOverLoadSet 28
MINOR: Outlet load has exceeded the 'Near Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletOverLoadCleared 29
INFORMATIONAL: Outlet load no longer exceeds the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletOverLoadSet 30
CRITICAL: Outlet load has exceeded the 'Over Load' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

sensorDisconnectedCleared 31
INFORMATIONAL: Sensor disconnected condition cleared. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

sensorDisconnectedSet 32
MINOR: Sensor disconnected condition set. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

sensorTypeIndeterminateCleared 33
INFORMATIONAL: Sensor type indeterminate condition cleared. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

sensorTypeIndeterminateSet 34
MINOR: Sensor type indeterminate condition set. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

sensorTypeUnsupportedCleared 35
INFORMATIONAL: Sensor type unsupported condition cleared. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

sensorTypeUnsupportedSet 36
MINOR: Sensor type unsupported condition set. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

maxTemperatureExceededCleared 37
INFORMATIONAL: Sensor Temperature no longer exceeds the 'Max Temperature' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

maxTemperatureExceededSet 38
CRITICAL: Sensor Temperature has exceeded the 'Max Temperature' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

highTemperatureExceededCleared 39
INFORMATIONAL: Sensor Temperature no longer exceeds the 'High Temperature' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

highTemperatureExceededSet 40
MINOR: Sensor Temperature has exceeded the 'High Temperature' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

lowHumidityExceededCleared 41
INFORMATIONAL: Sensor Humidity is no longer below the 'Low Humidity' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

lowHumidityExceededSet 42
MINOR: Sensor Humidity has fallen below the 'Low Humidity' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

minHumidityExceededCleared 43
INFORMATIONAL: Sensor Humidity is no longer below the 'Min Humidity' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

minHumidityExceededSet 44
CRITICAL: Sensor Humidity has fallen below the 'Min Humidity' threshold value. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

outletTurnOn 45
INFORMATIONAL: An outlet has turned on. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

outletTurnOff 46
INFORMATIONAL: An outlet has turned off. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

actionCancelled 47
INFORMATIONAL: An outlet action has been cancelled. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

deviceConfigurationChange 48
INFORMATIONAL: A device configuration has been changed. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

sensorConfigurationChange 49
INFORMATIONAL: A sensor configuration has been changed. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

outletConfigurationChange 50
INFORMATIONAL: An outlet configuration has been changed. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

phaseConfigurationChange 51
INFORMATIONAL: A phase configuration has been changed. The first argument is the serial number. The second argument is the device name. The third argument is the phase number.
TRAP-TYPE    

dryContactConfigurationChange 52
INFORMATIONAL: A dry contact configuration has been changed. The first argument is the serial number. The second argument is the device name. The third argument is the contact number.
TRAP-TYPE    

actionInit 53
INFORMATIONAL: An outlet action has been initialized. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

actionFailed 54
MINOR: An outlet action has failed to complete. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

actionDeleted 55
INFORMATIONAL: An outlet action has been deleted. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

syncCommandFailed 56
MINOR: An outlet sync command to another unit has failed. The first argument is the serial number. The second argument is the device name. The third argument is the outlet number.
TRAP-TYPE    

mPOPicFwDownloadStarted 57
INFORMATIONAL: MPO pic fw download started. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

mPOPicFwDownloadComplete 58
INFORMATIONAL: MPO pic fw download complete. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

mPOPicFwDownloadAborted 59
INFORMATIONAL: MPO pic fw download aborted. The first argument is the serial number. The second argument is the device name.
TRAP-TYPE    

sensorCommEstablished 60
INFORMATIONAL: Sensor comm established. The first argument is the serial number. The second argument is the device name. The third argument is the sensor number.
TRAP-TYPE    

configChangeSNMP 1000
MINOR: The SNMP configuration has been changed.
TRAP-TYPE    

accessViolationConsole 1001
MINOR: Someone attempted console login with incorrect password three times.
TRAP-TYPE    

accessViolationHTTP 1002
MINOR: Someone attempted login via HTTP with incorrect password.
TRAP-TYPE    

dellTestTrap 1003
INFORMATIONAL: Trap used to test SNMP trap functionality. The first argument is a place holder for test variables.
TRAP-TYPE