DVB-RCS-MIB

File: DVB-RCS-MIB.mib (119045 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB URI-TC-MIB
DIFFSERV-DSCP-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 transmission TEXTUAL-CONVENTION
RowStatus OBJECT-GROUP MODULE-COMPLIANCE
SnmpAdminString InetAddressType InetAddress
InetAddressPrefixLength InetPortNumber Uri
Dscp DscpOrAny

Defined Types

DvbRcsSatLabsProfileMap  
This textual convention enumerates the declaration of the SatLabs-defined terminal profiles. The mapping to the profiles is to be understood as described here. (0) refers to the most significant bit. dvbs(0) -> DVBS profile (DVB-S support) dvbs2ccm(1) -> DVB-S2 CCM profile (CCM support) dvbs2acm(2) -> DVB-S2 ACM profile (CCM, VCM and ACM support)
TEXTUAL-CONVENTION    
  BITS dvbs(0), dvbs2ccm(1), dvbs2acm(2), spare1(3), spare2(4), spare3(5), spare4(6), spare5(7), spare6(8), spare7(9), spare8(10), spare9(11), spare10(12), spare11(13), spare12(14), spare13(15), spare14(16), spare15(17), spare16(18), spare17(19), spare18(20), spare19(21), spare20(22), spare21(23), spare22(24), spare23(25), spare24(26), spare25(27), spare26(28), spare27(29), spare28(30), spare29(31)  

DvbRcsSatLabsOptionMap  
This textual convention enumerates the declaration of the SatLabs-defined options. A value of 1 indicates that the respective option is supported. The mapping to the options is to be understood as described here. (0) refers to the most significant bit. mpegTrf(0) -> MPEG_TRF coarseSync(1) -> COARSE_SYNC wideHop(2) -> WIDE_HOPP fastHop(3) -> FAST_HOPP dynamicMfTdma(4) -> Dynamic_MF_TDMA contentionSync(5) -> CONTENTION_SYNC qpskLow(6) -> QPSKLOW mod16Apsk(7) -> 16APSK mod32Apsk(8) -> 32APSK normalFec(9) -> NORMALFEC multiTs(10) -> MULTITS gsTs(11) -> GSTS enhQoS(12) -> ENHQOS pep(13) -> PEP http(14) -> HTTP ftp(15) -> FTP dns(16) -> DNS chIdStrict(17) -> CHID_STRICT nlid(18) -> NLID snmpMisc(19) -> SNMPMISC The support of specific options mandates the support of specific objects and access levels.
TEXTUAL-CONVENTION    
  BITS mpegTrf(0), coarseSync(1), wideHop(2), fastHop(3), dynamicMfTdma(4), contentionSync(5), qpskLow(6), mod16Apsk(7), mod32Apsk(8), normalFec(9), multiTs(10), gsTs(11), enhQoS(12), pep(13), http(14), ftp(15), dns(16), chIdStrict(17), nlid(18), snmpMisc(19), spare1(20), spare2(21), spare3(22), spare4(23), spare5(24), spare6(25), spare7(26), spare8(27), spare9(28), spare10(29), spare11(30), spare12(31)  

DvbRcsSatLabsFeatureMap  
This textual convention enumerates the declaration of the SatLabs-specified compatibility and configuration features. A value of 1 indicates that the respective feature is supported. The mapping to the features is to be understood as described here. (0) refers to the most significant bit. rcstPara(0) -> RCST_PARA feature installLog(1) -> INSTALL_LOG feature enhClassifier(2) -> ENHCLASSIFIER feature routeId(3) -> ROUTE_ID feature oduList(4) -> ODULIST feature extNetwork(5) -> EXTNETWORK feature extControl(6) -> EXTCONTROL feature extConfig(7) -> EXTCONFIG feature extStatus(8) -> EXTSTATUS feature mpaf(9) -> MPAF feature The support of specific features mandates the support of specific objects and access levels.
TEXTUAL-CONVENTION    
  BITS rcstPara(0), installLog(1), enhClassifier(2), routeId(3), oduList(4), extNetwork(5), extControl(6), extConfig(7), extStatus(8), mpaf(9), spare1(10), spare2(11), spare3(12), spare4(13), spare5(14), spare6(15), spare7(16), spare8(17), spare9(18), spare10(19), spare11(20), spare12(21), spare13(22), spare14(23), spare15(24), spare16(25), spare17(26), spare18(27), spare19(28), spare20(29), spare21(30), spare22(31)  

DvbRcsOduTxTypeEntry  
SEQUENCE    
  dvbRcsOduTxTypeIndex Unsigned32
  dvbRcsOduTxTypeDescription SnmpAdminString

DvbRcsOduRxTypeEntry  
SEQUENCE    
  dvbRcsOduRxTypeIndex Unsigned32
  dvbRcsOduRxTypeDescription SnmpAdminString

DvbRcsOduAntennaTypeEntry  
SEQUENCE    
  dvbRcsOduAntennaTypeIndex Unsigned32
  dvbRcsOduAntennaTypeDescription SnmpAdminString

DvbRcsPktClassEntry  
SEQUENCE    
  dvbRcsPktClassIndex Unsigned32
  dvbRcsPktClassDscpLow Dscp
  dvbRcsPktClassDscpHigh Dscp
  dvbRcsPktClassDscpMarkValue DscpOrAny
  dvbRcsPktClassIpProtocol Unsigned32
  dvbRcsPktClassSrcInetAddressType InetAddressType
  dvbRcsPktClassSrcInetAddress InetAddress
  dvbRcsPktClassSrcInetAddressPrefixLength InetAddressPrefixLength
  dvbRcsPktClassDstInetAddressType InetAddressType
  dvbRcsPktClassDstInetAddress InetAddress
  dvbRcsPktClassDstInetAddressPrefixLength InetAddressPrefixLength
  dvbRcsPktClassSrcPortLow InetPortNumber
  dvbRcsPktClassSrcPortHigh InetPortNumber
  dvbRcsPktClassDstPortLow InetPortNumber
  dvbRcsPktClassDstPortHigh InetPortNumber
  dvbRcsPktClassVlanUserPri Integer32
  dvbRcsPktClassPhbAssociation Unsigned32
  dvbRcsPktClassRowStatus RowStatus

DvbRcsPhbMappingEntry  
SEQUENCE    
  dvbRcsPhbIdentifier Unsigned32
  dvbRcsPhbName SnmpAdminString
  dvbRcsPhbRequestClassAssociation Unsigned32
  dvbRcsPhbMappingRowStatus RowStatus

DvbRcsRequestClassEntry  
SEQUENCE    
  dvbRcsRequestClassIndex Unsigned32
  dvbRcsRequestClassName SnmpAdminString
  dvbRcsRequestClassChanId Unsigned32
  dvbRcsRequestClassVccVpi Unsigned32
  dvbRcsRequestClassVccVci Unsigned32
  dvbRcsRequestClassPidPoolReference Unsigned32
  dvbRcsRequestClassCra Unsigned32
  dvbRcsRequestClassRbdcMax Unsigned32
  dvbRcsRequestClassRbdcTimeout Unsigned32
  dvbRcsRequestClassVbdcMax Unsigned32
  dvbRcsRequestClassVbdcTimeout Unsigned32
  dvbRcsRequestClassVbdcMaxBackLog Unsigned32
  dvbRcsRequestClassRowStatus RowStatus

DvbRcsPidPoolEntry  
SEQUENCE    
  dvbRcsPidPoolIndex Unsigned32
  dvbRcsPidIndex Unsigned32
  dvbRcsPidValue Unsigned32
  dvbRcsPidPoolRowStatus RowStatus

DvbRcsFwdStartEntry  
SEQUENCE    
  dvbRcsFwdStartIndex Unsigned32
  dvbRcsFwdStartPopId Integer32
  dvbRcsFwdStartFrequency Unsigned32
  dvbRcsFwdStartPolar INTEGER
  dvbRcsFwdStartFormat INTEGER
  dvbRcsFwdStartRolloff INTEGER
  dvbRcsFwdStartSymbolRate Unsigned32
  dvbRcsFwdStartInnerFec INTEGER
  dvbRcsFwdStartRowStatus RowStatus

DvbRcsFwdStatusEntry  
SEQUENCE    
  dvbRcsFwdStatusIndex Unsigned32
  dvbRcsFwdStatusIfReference Unsigned32
  dvbRcsFwdStatusNetId Unsigned32
  dvbRcsFwdStatusNetName SnmpAdminString
  dvbRcsFwdStatusFormat INTEGER
  dvbRcsFwdStatusFrequency Unsigned32
  dvbRcsFwdStatusPolar INTEGER
  dvbRcsFwdStatusInnerFec INTEGER
  dvbRcsFwdStatusSymbolRate Unsigned32
  dvbRcsFwdStatusRolloff INTEGER
  dvbRcsFwdStatusModulation INTEGER
  dvbRcsFwdStatusFecFrame INTEGER
  dvbRcsFwdStatusPilot INTEGER
  dvbRcsFwdStatusBer Integer32
  dvbRcsFwdStatusCnr Integer32
  dvbRcsFwdStatusRxPower Integer32

Defined Values

dvbRcsMib 1.3.6.1.2.1.10.239
DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
MODULE-IDENTITY    

dvbRcsMibObjects 1.3.6.1.2.1.10.239.1
OBJECT IDENTIFIER    

dvbRcsConformance 1.3.6.1.2.1.10.239.2
OBJECT IDENTIFIER    

dvbRcsRcst 1.3.6.1.2.1.10.239.1.1
OBJECT IDENTIFIER    



dvbRcsRcstSystem 1.3.6.1.2.1.10.239.1.1.1
OBJECT IDENTIFIER    

dvbRcsRcstNetwork 1.3.6.1.2.1.10.239.1.1.2
OBJECT IDENTIFIER    

dvbRcsRcstInstall 1.3.6.1.2.1.10.239.1.1.3
OBJECT IDENTIFIER    

dvbRcsRcstQos 1.3.6.1.2.1.10.239.1.1.4
OBJECT IDENTIFIER    

dvbRcsRcstControl 1.3.6.1.2.1.10.239.1.1.5
OBJECT IDENTIFIER    

dvbRcsRcstState 1.3.6.1.2.1.10.239.1.1.6
OBJECT IDENTIFIER    

dvbRcsFwdConfig 1.3.6.1.2.1.10.239.1.2.1
OBJECT IDENTIFIER    

dvbRcsFwdStatus 1.3.6.1.2.1.10.239.1.2.2
OBJECT IDENTIFIER    

dvbRcsRtnConfig 1.3.6.1.2.1.10.239.1.3.1
OBJECT IDENTIFIER    

dvbRcsRtnStatus 1.3.6.1.2.1.10.239.1.3.2
OBJECT IDENTIFIER    

dvbRcsSystemMibRevision 1.3.6.1.2.1.10.239.1.1.1.1
This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsSystemSatLabsProfilesDeclaration 1.3.6.1.2.1.10.239.1.1.1.2
Indicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations.
Status: current Access: read-only
OBJECT-TYPE    
  DvbRcsSatLabsProfileMap  

dvbRcsSystemSatLabsOptionsDeclaration 1.3.6.1.2.1.10.239.1.1.1.3
Indicates the SatLabs options supported, as defined in the SatLabs System Recommendations.
Status: current Access: read-only
OBJECT-TYPE    
  DvbRcsSatLabsOptionMap  

dvbRcsSystemSatLabsFeaturesDeclaration 1.3.6.1.2.1.10.239.1.1.1.4
Indicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations.
Status: current Access: read-only
OBJECT-TYPE    
  DvbRcsSatLabsFeatureMap  

dvbRcsSystemLocation 1.3.6.1.2.1.10.239.1.1.1.5
Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: ,,,,,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsSystemOduAntennaSize 1.3.6.1.2.1.10.239.1.1.1.6
Diameter of the antenna.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsSystemOduAntennaGain 1.3.6.1.2.1.10.239.1.1.1.7
Antenna peak gain of the ODU.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsSystemOduSspa 1.3.6.1.2.1.10.239.1.1.1.8
Power level of the Solid State Power Amplifier installed in the ODU.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsSystemOduTxType 1.3.6.1.2.1.10.239.1.1.1.9
Type of transmitter installed in the ODU.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsSystemOduRxType 1.3.6.1.2.1.10.239.1.1.1.10
Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsSystemOduRxBand 1.3.6.1.2.1.10.239.1.1.1.11
LNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Band
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oduHighRxBand(0), oduLowRxBand(1)  

dvbRcsSystemOduRxLO 1.3.6.1.2.1.10.239.1.1.1.12
Frequency of LNB Local Oscillator (in 100 Hz)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsSystemOduTxLO 1.3.6.1.2.1.10.239.1.1.1.13
Frequency of Block Up-Converter Local Oscillator (in 100 Hz).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsSystemIduPep 1.3.6.1.2.1.10.239.1.1.1.14
OBJECT IDENTIFIER    

dvbRcsTcpPep 1.3.6.1.2.1.10.239.1.1.1.14.1
Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dvbRcsHttpPep 1.3.6.1.2.1.10.239.1.1.1.14.2
Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dvbRcsOduTx 1.3.6.1.2.1.10.239.1.1.1.15
OBJECT IDENTIFIER    

dvbRcsOduRx 1.3.6.1.2.1.10.239.1.1.1.16
OBJECT IDENTIFIER    

dvbRcsOduAntenna 1.3.6.1.2.1.10.239.1.1.1.17
OBJECT IDENTIFIER    

dvbRcsOduTxTypeTable 1.3.6.1.2.1.10.239.1.1.1.15.1
This table contains the identification of each well- known BUC type supported by the IDU and provides its associated index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsOduTxTypeEntry

dvbRcsOduTxTypeEntry 1.3.6.1.2.1.10.239.1.1.1.15.1.1
An entry in the BUC type table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsOduTxTypeEntry  

dvbRcsOduTxTypeIndex 1.3.6.1.2.1.10.239.1.1.1.15.1.1.1
Index for the BUC type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

dvbRcsOduTxTypeDescription 1.3.6.1.2.1.10.239.1.1.1.15.1.1.2
Text-based identification of a BUC type.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsOduTxType 1.3.6.1.2.1.10.239.1.1.1.15.2
Index of the selected BUC type.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsOduRxTypeTable 1.3.6.1.2.1.10.239.1.1.1.16.1
This table contains the identification of each well- known LNB type supported by the IDU and provides its associated index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsOduRxTypeEntry

dvbRcsOduRxTypeEntry 1.3.6.1.2.1.10.239.1.1.1.16.1.1
An entry in the LNB type table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsOduRxTypeEntry  

dvbRcsOduRxTypeIndex 1.3.6.1.2.1.10.239.1.1.1.16.1.1.1
Index for the LNB type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

dvbRcsOduRxTypeDescription 1.3.6.1.2.1.10.239.1.1.1.16.1.1.2
Text-based identification of an LNB type.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsOduRxType 1.3.6.1.2.1.10.239.1.1.1.16.2
Index of the selected LNB type.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsOduAntennaTypeTable 1.3.6.1.2.1.10.239.1.1.1.17.1
This table contains the identification of each well- known antenna type supported by the IDU and provides its associated index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsOduAntennaTypeEntry

dvbRcsOduAntennaTypeEntry 1.3.6.1.2.1.10.239.1.1.1.17.1.1
An entry in the antenna type table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsOduAntennaTypeEntry  

dvbRcsOduAntennaTypeIndex 1.3.6.1.2.1.10.239.1.1.1.17.1.1.1
Index for the antenna type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

dvbRcsOduAntennaTypeDescription 1.3.6.1.2.1.10.239.1.1.1.17.1.1.2
Text-based identification of an antenna type.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsOduAntennaType 1.3.6.1.2.1.10.239.1.1.1.17.2
Index of the selected antenna type.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsNetworkOamInetAddressType 1.3.6.1.2.1.10.239.1.1.2.1
The type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsNetworkOamInetAddress 1.3.6.1.2.1.10.239.1.1.2.2
OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address. If the terminal has no OAM Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkOamInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsNetworkOamInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.3
Prefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsNetworkOamInetAddressAssign 1.3.6.1.2.1.10.239.1.1.2.4
Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oamInetAddressStatic(1), oamInetAddressDynamic(2)  

dvbRcsNetworkLanInetAddressType 1.3.6.1.2.1.10.239.1.1.2.5
The type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsNetworkLanInetAddress 1.3.6.1.2.1.10.239.1.1.2.6
IP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkLanInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsNetworkLanInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.7
Prefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType 1.3.6.1.2.1.10.239.1.1.2.8
The type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress 1.3.6.1.2.1.10.239.1.1.2.9
IP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.10
Prefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsNetworkDnsServers 1.3.6.1.2.1.10.239.1.1.2.11
OBJECT IDENTIFIER    

dvbRcsPrimaryDnsServerInetAddressType 1.3.6.1.2.1.10.239.1.1.2.11.1
The type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsPrimaryDnsServerInetAddress 1.3.6.1.2.1.10.239.1.1.2.11.2
IP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPrimaryDnsServerInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsPrimaryDnsServerInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.11.3
Prefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsSecondaryDnsServerInetAddressType 1.3.6.1.2.1.10.239.1.1.2.11.4
The type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsSecondaryDnsServerInetAddress 1.3.6.1.2.1.10.239.1.1.2.11.5
IP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsSecondaryDnsServerInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsSecondaryDnsServerInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.11.6
Prefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsNetworkNccMgtInetAddressType 1.3.6.1.2.1.10.239.1.1.2.12
The type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

dvbRcsNetworkNccMgtInetAddress 1.3.6.1.2.1.10.239.1.1.2.13
IP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkNccMgtInetAddressType object.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

dvbRcsNetworkNccMgtInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.14
Prefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsNetworkConfigFileDownloadUrl 1.3.6.1.2.1.10.239.1.1.2.15
Full path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
Status: current Access: read-write
OBJECT-TYPE    
  Uri Size(0..65535)  

dvbRcsNetworkInstallLogFileDownloadUrl 1.3.6.1.2.1.10.239.1.1.2.16
Full path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 3986.
Status: current Access: read-write
OBJECT-TYPE    
  Uri Size(0..65535)  

dvbRcsNetworkConfigFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.17
Full path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
Status: current Access: read-write
OBJECT-TYPE    
  Uri Size(0..65535)  

dvbRcsNetworkLogFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.18
Full path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
Status: current Access: read-write
OBJECT-TYPE    
  Uri Size(0..65535)  

dvbRcsNetworkInstallLogFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.19
Full path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 3986.
Status: current Access: read-write
OBJECT-TYPE    
  Uri Size(0..65535)  

dvbRcsInstallAntennaAlignmentState 1.3.6.1.2.1.10.239.1.1.3.1
Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER antennaAlignmentStart(1), antennaAlignmentDeny(2), antennaAlignmentContinue(3), antennaAlignmentStop(4), antennaAlignmentSuccess(5), antennaAlignmentFail(6)  

dvbRcsInstallCwFrequency 1.3.6.1.2.1.10.239.1.1.3.2
Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallCwMaxDuration 1.3.6.1.2.1.10.239.1.1.3.3
Time after which the Continuous Wave carrier must be put down (in seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallCwPower 1.3.6.1.2.1.10.239.1.1.3.4
IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dvbRcsInstallCoPolReading 1.3.6.1.2.1.10.239.1.1.3.5
Co-polarization measured value during installation procedure (in 0.1 dB).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallXPolReading 1.3.6.1.2.1.10.239.1.1.3.6
Cross-polarization measured value during installation procedure (in 0.1 dB).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallCoPolTarget 1.3.6.1.2.1.10.239.1.1.3.7
Co-polarization target value during installation procedure (in 0.1 dB).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallXPolTarget 1.3.6.1.2.1.10.239.1.1.3.8
Cross-polarization target value during installation procedure (in 0.1 dB).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallStandByDuration 1.3.6.1.2.1.10.239.1.1.3.9
Time to wait in stand-by mode (in seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsInstallTargetEsN0 1.3.6.1.2.1.10.239.1.1.3.10
This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dB to 31.5 dB, with a precision of 0.1 dB.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..315  

dvbRcsPktClassTable 1.3.6.1.2.1.10.239.1.1.4.1
This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsPktClassEntry

dvbRcsPktClassEntry 1.3.6.1.2.1.10.239.1.1.4.1.1
An entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types are then assumed to be set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsPktClassEntry  

dvbRcsPktClassIndex 1.3.6.1.2.1.10.239.1.1.4.1.1.1
Index automatically incremented by one at row creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..64  

dvbRcsPktClassDscpLow 1.3.6.1.2.1.10.239.1.1.4.1.1.2
This object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

dvbRcsPktClassDscpHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.3
This object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
Status: current Access: read-create
OBJECT-TYPE    
  Dscp  

dvbRcsPktClassDscpMarkValue 1.3.6.1.2.1.10.239.1.1.4.1.1.4
This object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63)
Status: current Access: read-create
OBJECT-TYPE    
  DscpOrAny  

dvbRcsPktClassIpProtocol 1.3.6.1.2.1.10.239.1.1.4.1.1.5
This object specifies the IP protocol to which a packet is compared. A value of 255 means match all.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dvbRcsPktClassSrcInetAddressType 1.3.6.1.2.1.10.239.1.1.4.1.1.6
The type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

dvbRcsPktClassSrcInetAddress 1.3.6.1.2.1.10.239.1.1.4.1.1.7
This object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassSrcInetAddressType object.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

dvbRcsPktClassSrcInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.4.1.1.8
Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsPktClassDstInetAddressType 1.3.6.1.2.1.10.239.1.1.4.1.1.9
The type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this object is unknown(0).
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

dvbRcsPktClassDstInetAddress 1.3.6.1.2.1.10.239.1.1.4.1.1.10
This object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassDstInetAddressType object.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

dvbRcsPktClassDstInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.4.1.1.11
Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

dvbRcsPktClassSrcPortLow 1.3.6.1.2.1.10.239.1.1.4.1.1.12
This object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

dvbRcsPktClassSrcPortHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.13
This object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

dvbRcsPktClassDstPortLow 1.3.6.1.2.1.10.239.1.1.4.1.1.14
This object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

dvbRcsPktClassDstPortHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.15
This object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  InetPortNumber  

dvbRcsPktClassVlanUserPri 1.3.6.1.2.1.10.239.1.1.4.1.1.16
This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..7  

dvbRcsPktClassPhbAssociation 1.3.6.1.2.1.10.239.1.1.4.1.1.17
Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbRcsPktClassRowStatus 1.3.6.1.2.1.10.239.1.1.4.1.1.18
The status of this conceptual row. All writable objects in this row may be modified at any time.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbRcsPhbMappingTable 1.3.6.1.2.1.10.239.1.1.4.2
This table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsPhbMappingEntry

dvbRcsPhbMappingEntry 1.3.6.1.2.1.10.239.1.1.4.2.1
An entry in the PHB mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsPhbMappingEntry  

dvbRcsPhbIdentifier 1.3.6.1.2.1.10.239.1.1.4.2.1.1
Identification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbRcsPhbName 1.3.6.1.2.1.10.239.1.1.4.2.1.2
The name of the Per-Hop Behavior (PHB).
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsPhbRequestClassAssociation 1.3.6.1.2.1.10.239.1.1.4.2.1.3
This object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..16  

dvbRcsPhbMappingRowStatus 1.3.6.1.2.1.10.239.1.1.4.2.1.4
The status of this conceptual row. All writable objects in this row may be modified at any time.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbRcsRequestClassTable 1.3.6.1.2.1.10.239.1.1.4.3
This table is a list of Request Class entries. This class describes the layer 2 QoS objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsRequestClassEntry

dvbRcsRequestClassEntry 1.3.6.1.2.1.10.239.1.1.4.3.1
An entry in the Request Class table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsRequestClassEntry  

dvbRcsRequestClassIndex 1.3.6.1.2.1.10.239.1.1.4.3.1.1
Index of the Request Class table. A total of 16 entries are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

dvbRcsRequestClassName 1.3.6.1.2.1.10.239.1.1.4.3.1.2
Name of the Request Class.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsRequestClassChanId 1.3.6.1.2.1.10.239.1.1.4.3.1.3
Channel ID of the Request Class.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..15  

dvbRcsRequestClassVccVpi 1.3.6.1.2.1.10.239.1.1.4.3.1.4
Defines the VPI used for the Request Class (ATM profile).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

dvbRcsRequestClassVccVci 1.3.6.1.2.1.10.239.1.1.4.3.1.5
Defines the VCI used for the Request Class (ATM profile).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbRcsRequestClassPidPoolReference 1.3.6.1.2.1.10.239.1.1.4.3.1.6
Reference to the Packet IDentifier (PID) pool applicable for the Request Class.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..16  

dvbRcsRequestClassCra 1.3.6.1.2.1.10.239.1.1.4.3.1.7
Defines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassRbdcMax 1.3.6.1.2.1.10.239.1.1.4.3.1.8
Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassRbdcTimeout 1.3.6.1.2.1.10.239.1.1.4.3.1.9
Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassVbdcMax 1.3.6.1.2.1.10.239.1.1.4.3.1.10
Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassVbdcTimeout 1.3.6.1.2.1.10.239.1.1.4.3.1.11
Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassVbdcMaxBackLog 1.3.6.1.2.1.10.239.1.1.4.3.1.12
Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsRequestClassRowStatus 1.3.6.1.2.1.10.239.1.1.4.3.1.13
The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbRcsPidPoolTable 1.3.6.1.2.1.10.239.1.1.4.4
This table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsPidPoolEntry

dvbRcsPidPoolEntry 1.3.6.1.2.1.10.239.1.1.4.4.1
An entry in the PID pool table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsPidPoolEntry  

dvbRcsPidPoolIndex 1.3.6.1.2.1.10.239.1.1.4.4.1.1
Index of the PID pool in the PID pool table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

dvbRcsPidIndex 1.3.6.1.2.1.10.239.1.1.4.4.1.2
Index of the PID entry within the PID pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

dvbRcsPidValue 1.3.6.1.2.1.10.239.1.1.4.4.1.3
Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8191  

dvbRcsPidPoolRowStatus 1.3.6.1.2.1.10.239.1.1.4.4.1.4
The status of this conceptual row. All writable objects in this row may be modified at any time.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbRcsQosGlobalRbdcMax 1.3.6.1.2.1.10.239.1.1.4.5
Global maximum RBDC that can be requested for the RCST, in number of 2 kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsQosGlobalVbdcMax 1.3.6.1.2.1.10.239.1.1.4.6
Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsQosGlobalVbdcMaxBackLog 1.3.6.1.2.1.10.239.1.1.4.7
Global VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

dvbRcsQosChannelIdStrictDispatching 1.3.6.1.2.1.10.239.1.1.4.8
Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notStrict(0), strict(1)  

dvbRcsCtrlRebootCommand 1.3.6.1.2.1.10.239.1.1.5.1
This variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load before reboot)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), normal(2), alternate(3)  

dvbRcsCtrlRcstTxDisable 1.3.6.1.2.1.10.239.1.1.5.2
This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), disable(2)  

dvbRcsCtrlUserTrafficDisable 1.3.6.1.2.1.10.239.1.1.5.3
This variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user traffic
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), disable(2)  

dvbRcsCtrlCwEnable 1.3.6.1.2.1.10.239.1.1.5.4
This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

dvbRcsCtrlOduTxReferenceEnable 1.3.6.1.2.1.10.239.1.1.5.5
Enables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

dvbRcsCtrlOduTxDCEnable 1.3.6.1.2.1.10.239.1.1.5.6
Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

dvbRcsCtrlOduRxDCEnable 1.3.6.1.2.1.10.239.1.1.5.7
Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

dvbRcsCtrlDownloadFileCommand 1.3.6.1.2.1.10.239.1.1.5.8
This variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG feature)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), config(2), installationLog(3)  

dvbRcsCtrlUploadFileCommand 1.3.6.1.2.1.10.239.1.1.5.9
This variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG feature)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), config(2), eventAlarm(3), installationLog(4)  

dvbRcsCtrlActivateConfigFileCommand 1.3.6.1.2.1.10.239.1.1.5.10
Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) idle (2) activate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), activate(2)  

dvbRcsCtrlRcstLogonCommand 1.3.6.1.2.1.10.239.1.1.5.11
This variable will initiate an RCST logon: (1) idle (2) initiate RCST logon
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), logon(2)  

dvbRcsCtrlRcstLogoffCommand 1.3.6.1.2.1.10.239.1.1.5.12
This variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoff
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), logoff(2)  

dvbRcsCtrlRcstRxReacquire 1.3.6.1.2.1.10.239.1.1.5.13
This variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward link
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), reacquireForwardLink(2)  

dvbRcsRcstMode 1.3.6.1.2.1.10.239.1.1.6.1
Identifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Operational (1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER installation(0), operational(1)  

dvbRcsRcstFaultStatus 1.3.6.1.2.1.10.239.1.1.6.2
Provides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nofault(0), fault(1)  

dvbRcsRcstFwdLinkStatus 1.3.6.1.2.1.10.239.1.1.6.3
Provides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAcquired(0), acquired(1)  

dvbRcsRcstRtnLinkStatus 1.3.6.1.2.1.10.239.1.1.6.4
Provides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER loggedOff(0), loggedOn(1)  

dvbRcsRcstLogUpdated 1.3.6.1.2.1.10.239.1.1.6.5
Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication as the log file is fetched by the NCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noUpdate(0), logfileUpdated(1)  

dvbRcsRcstCurrentSoftwareVersion 1.3.6.1.2.1.10.239.1.1.6.6
Current RCST software version.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsRcstAlternateSoftwareVersion 1.3.6.1.2.1.10.239.1.1.6.7
Alternate (backup/new) RCST software version.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsRcstActivatedConfigFileVersion 1.3.6.1.2.1.10.239.1.1.6.8
Version of the most recently activated configuration file. The version is vendor specific.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsRcstDownloadedConfigFileVersion 1.3.6.1.2.1.10.239.1.1.6.9
Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsFwdStartTable 1.3.6.1.2.1.10.239.1.2.1.1
Lists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsFwdStartEntry

dvbRcsFwdStartEntry 1.3.6.1.2.1.10.239.1.2.1.1.1
An entry in the Forward Link Start Configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsFwdStartEntry  

dvbRcsFwdStartIndex 1.3.6.1.2.1.10.239.1.2.1.1.1.1
Index of the Forward Link StartConfig table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

dvbRcsFwdStartPopId 1.3.6.1.2.1.10.239.1.2.1.1.1.2
Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..65535  

dvbRcsFwdStartFrequency 1.3.6.1.2.1.10.239.1.2.1.1.1.3
Frequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 kHz.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsFwdStartPolar 1.3.6.1.2.1.10.239.1.2.1.1.1.4
2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER linearHorizontal(0), linearVertical(1), circularLeft(2), circularRight(3)  

dvbRcsFwdStartFormat 1.3.6.1.2.1.10.239.1.2.1.1.1.5
Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting the forward link. The support of automatic format selection is optional. One or several of the other format selections must be supported, according to the claimed SatLabs profile support.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(-1), dvbs(0), dvbs2ccm(1), dvbs2acm(2)  

dvbRcsFwdStartRolloff 1.3.6.1.2.1.10.239.1.2.1.1.1.6
Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER autoRolloff(0), rolloff020(1), rolloff025(2), rolloff035(3)  

dvbRcsFwdStartSymbolRate 1.3.6.1.2.1.10.239.1.2.1.1.1.7
Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 symbols/s.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

dvbRcsFwdStartInnerFec 1.3.6.1.2.1.10.239.1.2.1.1.1.8
Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The support of autoFec is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER autoFec(-1), fecRate12(0), fecRate23(1), fecRate34(2), fecRate56(3), fecRate78(4), fecRate89(5), fecRate35(6), fecRate45(7), fecRate910(8), fecRate25(9), fecRate13(10), fecRate14(11), noInnerCode(12)  

dvbRcsFwdStartRowStatus 1.3.6.1.2.1.10.239.1.2.1.1.1.9
The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dvbRcsFwdStatusPopId 1.3.6.1.2.1.10.239.1.2.2.1
Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dvbRcsFwdStatusTable 1.3.6.1.2.1.10.239.1.2.2.2
This table describes the current status of Forward Link interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DvbRcsFwdStatusEntry

dvbRcsFwdStatusEntry 1.3.6.1.2.1.10.239.1.2.2.2.1
An entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DvbRcsFwdStatusEntry  

dvbRcsFwdStatusIndex 1.3.6.1.2.1.10.239.1.2.2.2.1.1
Index of the forward link status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

dvbRcsFwdStatusIfReference 1.3.6.1.2.1.10.239.1.2.2.2.1.2
Cross reference to the interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8  

dvbRcsFwdStatusNetId 1.3.6.1.2.1.10.239.1.2.2.2.1.3
Interactive network identifier of the forward link (from the RCS Map Table).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dvbRcsFwdStatusNetName 1.3.6.1.2.1.10.239.1.2.2.2.1.4
The name of the interactive network of the forward link (from the RCS Map Table).
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dvbRcsFwdStatusFormat 1.3.6.1.2.1.10.239.1.2.2.2.1.5
Specifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reserved
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dvbs(0), dvbs2ccm(1), dvbs2acm(2), reservedFormat(3)  

dvbRcsFwdStatusFrequency 1.3.6.1.2.1.10.239.1.2.2.2.1.6
An estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dvbRcsFwdStatusPolar 1.3.6.1.2.1.10.239.1.2.2.2.1.7
2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER linearHorizontal(0), linearVertical(1), circularLeft(2), circularRight(3)  

dvbRcsFwdStatusInnerFec 1.3.6.1.2.1.10.239.1.2.2.2.1.8
Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(-1), fecRate12(0), fecRate23(1), fecRate34(2), fecRate56(3), fecRate78(4), fecRate89(5), fecRate35(6), fecRate45(7), fecRate910(8), fecRate25(9), fecRate13(10), fecRate14(11), noInnerCode(12)  

dvbRcsFwdStatusSymbolRate 1.3.6.1.2.1.10.239.1.2.2.2.1.9
An estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dvbRcsFwdStatusRolloff 1.3.6.1.2.1.10.239.1.2.2.2.1.10
An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefRolloff(0), rolloff020(1), rolloff025(2), rolloff035(3)  

dvbRcsFwdStatusModulation 1.3.6.1.2.1.10.239.1.2.2.2.1.11
Indicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), mBPSK(1), mQPSK(2), m8PSK(3), m16APSK(4), m32APSK(5)  

dvbRcsFwdStatusFecFrame 1.3.6.1.2.1.10.239.1.2.2.2.1.12
Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), shortframe(1), longframe(2)  

dvbRcsFwdStatusPilot 1.3.6.1.2.1.10.239.1.2.2.2.1.13
Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), pilotNotused(1), pilotUsed(2)  

dvbRcsFwdStatusBer 1.3.6.1.2.1.10.239.1.2.2.2.1.14
Provides the RCST BER on the Forward Link in log10 units.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dvbRcsFwdStatusCnr 1.3.6.1.2.1.10.239.1.2.2.2.1.15
Provides the RCST CNR on the Forward Link in 0.1 dB units.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dvbRcsFwdStatusRxPower 1.3.6.1.2.1.10.239.1.2.2.2.1.16
Provides the power level of the forward link as received at the IDU, in 0.1 dBm units.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dvbRcsRtnConfigMaxEirp 1.3.6.1.2.1.10.239.1.3.1.1
Max Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX output level, e.g., when using a BUC that has a power level detector and that provides sufficient feedback to the IDU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dvbRcsRtnConfigDefIfLevel 1.3.6.1.2.1.10.239.1.3.1.2
IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dvbRcsRtnStatusEbN0 1.3.6.1.2.1.10.239.1.3.2.1
The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dvbRcsRtnStatusSFDuration 1.3.6.1.2.1.10.239.1.3.2.2
The duration of the currently applied return link superframe structure, in tenths of milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 250..7500  

dvbRcsRtnStatusPayloadUnit 1.3.6.1.2.1.10.239.1.3.2.3
Indicates if the payload unit used for the return link is ATM or MPEG.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unitATM(0), unitMPEG(1)  

dvbRcsRcstGroups 1.3.6.1.2.1.10.239.2.1
OBJECT IDENTIFIER    

dvbRcsRcstCompliances 1.3.6.1.2.1.10.239.2.2
OBJECT IDENTIFIER    

dvbRcsRcstCompliance1 1.3.6.1.2.1.10.239.2.2.1
The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of the options or features defined in the SatLabs System Recommendations. The supported options and features of a terminal are declared in objects dvbRcsSystemSatLabsOptionsDeclaration and dvbRcsSystemSatLabsFeaturesDeclaration respectively.
Status: current Access: not-accessible
MODULE-COMPLIANCE    

dvbRcsRcstSystemGroup 1.3.6.1.2.1.10.239.2.1.1
A collection of objects providing information applicable for basic device management support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstNetworkGroup 1.3.6.1.2.1.10.239.2.1.2
A collection of objects providing basic networking management support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstExtNetworkGroup 1.3.6.1.2.1.10.239.2.1.3
A collection of objects providing extended networking management support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstDnsGroup 1.3.6.1.2.1.10.239.2.1.4
A collection of objects providing DNS management support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstInstallGroup 1.3.6.1.2.1.10.239.2.1.5
A collection of objects providing information applicable for basic installation support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstExtInstallGroup 1.3.6.1.2.1.10.239.2.1.6
A collection of objects providing extended device installation support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstQosGroup 1.3.6.1.2.1.10.239.2.1.7
A collection of objects providing basic access to QoS configuration data.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstEnhancedClassifierGroup 1.3.6.1.2.1.10.239.2.1.8
A collection of objects providing support for management of the enhanced classifier.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstMpegQosGroup 1.3.6.1.2.1.10.239.2.1.9
A collection of objects providing access to MPEG-related link QoS configuration data.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstGlobalQosGroup 1.3.6.1.2.1.10.239.2.1.10
A collection of objects providing access to global RCST QoS configuration data.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstStrictQosGroup 1.3.6.1.2.1.10.239.2.1.11
A collection of objects allowing management of strict channel ID dispatching.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstControlGroup 1.3.6.1.2.1.10.239.2.1.12
A collection of objects allowing basic RCST control.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstExtControlGroup 1.3.6.1.2.1.10.239.2.1.13
A collection of objects allowing extended RCST control.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstStateGroup 1.3.6.1.2.1.10.239.2.1.14
A collection of objects allowing access to RCST state.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsFwdConfigGroup 1.3.6.1.2.1.10.239.2.1.15
A collection of objects providing basic start forward link configuration support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsFwdStatusGroup 1.3.6.1.2.1.10.239.2.1.16
A collection of objects providing forward link status.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRtnConfigGroup 1.3.6.1.2.1.10.239.2.1.17
A collection of objects providing basic return link configuration support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRtnExtConfigGroup 1.3.6.1.2.1.10.239.2.1.18
A collection of objects providing extended return link configuration support.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRtnStatusGroup 1.3.6.1.2.1.10.239.2.1.19
A collection of objects allowing access to return link status.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRtnExtStatusGroup 1.3.6.1.2.1.10.239.2.1.20
A collection of objects allowing access to extended return link status.
Status: current Access: not-accessible
OBJECT-GROUP    

dvbRcsRcstOduListGroup 1.3.6.1.2.1.10.239.2.1.21
A collection of objects supporting flexible selection of ODU devices.
Status: current Access: not-accessible
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor