DV2-MIB

File: DV2-MIB.mib (547770 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1215
RFC-1212

Imported symbols

enterprises IpAddress Counter
Gauge DisplayString PhysAddress
TRAP-TYPE OBJECT-TYPE

Defined Types

VirtualCircuitIdentifier  
INTEGER 0..65535    

VirtualPathIdentifier  
INTEGER 0..4095    

E164  
OCTET STRING Size(2..10)    

E164SUB  
OCTET STRING Size(2..22)    

Q93bCauseDiag  
OCTET STRING Size(4)    

Hex  
INTEGER 0..65535    

DateTimeString  
OCTET STRING Size(8)    

DateAndTime  
DateTimeString    

SysLinkEntry  
SEQUENCE    
  sysLkLinkNo INTEGER
  sysLkKillLink INTEGER
  sysLkState INTEGER
  sysLkTxCells Counter
  sysLkRxCells Counter
  sysLkTxRate Gauge
  sysLkRxRate Gauge
  sysLkTxMaxRate Gauge
  sysLkRxMaxRate Gauge
  sysLkResetStats INTEGER
  sysLkClockSrc INTEGER
  sysLkResetResrc INTEGER
  sysLKEgCLPThreshold INTEGER
  sysLKIgCLPThreshold INTEGER
  sysLKEgEFCIThreshold INTEGER
  sysLKIgEFCIThreshold INTEGER
  sysLKEgLogBuffer INTEGER
  sysLKIgLogBuffer INTEGER
  sysLKEgFIFODepth INTEGER
  sysLKIgFIFODepth INTEGER
  sysLKEgMemBlockId INTEGER
  sysLKIgMemBlockId INTEGER

SysDbEntry  
SEQUENCE    
  sysDbIndex INTEGER
  sysDbSize INTEGER
  sysDbInitial INTEGER
  sysDbCurrent INTEGER

SysAuthenticateEntry  
SEQUENCE    
  sysAuIndex INTEGER
  sysAuIpaddress IpAddress
  sysAuCommunity DisplayString
  sysAuAccess INTEGER
  sysAuSendTraps INTEGER
  sysAuValidity INTEGER

Slot0PsuEntry  
SEQUENCE    
  slot0PsuIndex INTEGER
  slot0PsuFault INTEGER
  slot0PsuTestFault INTEGER
  slot0PsuVoltage INTEGER
  slot0PsuTemp INTEGER
  slot0PsuFanASpeed INTEGER
  slot0PsuFanBSpeed INTEGER
  slot0PsuFanCSpeed INTEGER
  slot0PsuReset INTEGER
  slot0PsuType INTEGER
  slot0PsuFanFail INTEGER
  slot0PsuTooHot INTEGER
  slot0PsuFrontTooHot INTEGER

Slot0PhyEntry  
SEQUENCE    
  slot0PhySlotNo INTEGER
  slot0PhyName DisplayString
  slot0PhyType INTEGER
  slot0PhyDlim INTEGER
  slot0PhySwVer DisplayString
  slot0PhyState INTEGER
  slot0PhyReset INTEGER
  slot0PhyReqState INTEGER
  slot0PhyStateChange INTEGER
  slot0PhyLinkedSlot INTEGER
  slot0PhyLink0State INTEGER
  slot0PhyLink1State INTEGER
  slot0PhyLink2State INTEGER
  slot0PhyLink3State INTEGER
  slot0PhySlotSerNo DisplayString
  slot0PhySlotHwVerNo DisplayString
  slot0PhyDocSerNo DisplayString
  slot0PhyDocHwVerNo DisplayString
  slot0PhyMacAddress PhysAddress
  slot0PhyChangeTimeM2 DateAndTime
  slot0PhyLstChngLnkNum INTEGER
  slot0PhyLstChngPrevLnkStat INTEGER

PrimaryEntry  
SEQUENCE    
  pIndex INTEGER
  pValidSource INTEGER
  pOnOffLine INTEGER
  pSlotNumber INTEGER
  pSysRefSelect INTEGER
  pActiveTimingSource INTEGER
  pInputLineOk INTEGER
  pSysRefTimingOk INTEGER

SecondaryEntry  
SEQUENCE    
  sIndex INTEGER
  sValidSource INTEGER
  sOnOffLine INTEGER
  sSlotNumber INTEGER
  sSysRefSelect INTEGER
  sActiveTimingSource INTEGER
  sInputLineOk INTEGER
  sSysRefTimingOk INTEGER

PCATcontrolEntry  
SEQUENCE    
  pccIndex INTEGER
  pccatlimtype INTEGER
  pccatsendcode INTEGER
  pccatactivate INTEGER
  pccatsendconfig INTEGER
  pccatbytestransferred INTEGER
  pccatfilexferstat INTEGER
  pcatforcesecext INTEGER
  pcatforcesecstr3 INTEGER
  pcatcommand INTEGER
  pcatplaceholder1 INTEGER
  pcatplaceholder2 INTEGER
  pcconoffline INTEGER

SCATcontrolEntry  
SEQUENCE    
  sccIndex INTEGER
  sccatlimtype INTEGER
  sccatsendcode INTEGER
  sccatactivate INTEGER
  sccatsendconfig INTEGER
  sccatbytestransferred INTEGER
  sccatfilexferstat INTEGER
  scatcommand INTEGER
  scatplaceholder1 INTEGER
  scatplaceholder2 INTEGER
  scconoffline INTEGER

PCATstatusEntry  
SEQUENCE    
  pscIndex INTEGER
  pscatlimtype INTEGER
  psCATFFrevision DisplayString
  psCATBootrevision DisplayString
  psCATHWrevision INTEGER
  pscatfilestatus INTEGER
  psCATfilerevision DisplayString
  pscatmode INTEGER
  pscaterrorcode INTEGER
  pscatplaceholder1 INTEGER
  pscatplaceholder2 INTEGER

SCATstatusEntry  
SEQUENCE    
  sscIndex INTEGER
  sscatlimtype INTEGER
  ssCATFFrevision DisplayString
  ssCATBootrevision DisplayString
  sscatfilestatus INTEGER
  ssCATfilerevision DisplayString
  ssCATHWrevision INTEGER
  sscatmode INTEGER
  sscaterrorcode INTEGER
  sscatplaceholder1 INTEGER
  sscatplaceholder2 INTEGER

PCATStratum3ConfigEntry  
SEQUENCE    
  ps3cIndex INTEGER
  pcatstr3listener INTEGER
  pcatstr3oscillator INTEGER
  pcatstr3forcesecondary INTEGER
  pcatstr3reconfigure INTEGER

SCATStratum3ConfigEntry  
SEQUENCE    
  ss3cIndex INTEGER
  scatstr3listener INTEGER
  scatstr3oscillator INTEGER
  scatstr3reconfigure INTEGER

PCATStratum3StatusEntry  
SEQUENCE    
  ps3sIndex INTEGER
  pcatstr3listenerstatus INTEGER
  pcatstr3driverstatus INTEGER
  pcatstr3oscstatus INTEGER

SCATStratum3StatusEntry  
SEQUENCE    
  ss3sIndex INTEGER
  scatstr3listenerstatus INTEGER
  scatstr3driverstatus INTEGER
  scatstr3oscstatus INTEGER

PCATBitsConfigEntry  
SEQUENCE    
  pbcIndex INTEGER
  pbcds1V2TxLineLn INTEGER
  pbcplaceholder1 INTEGER
  pbcV2FRMRMode INTEGER
  pbcds1V2Coding INTEGER
  pbcV2Lb INTEGER
  pbcclrperf INTEGER
  pbcreconfigure INTEGER

SCATBitsConfigEntry  
SEQUENCE    
  sbcIndex INTEGER
  sbcds1V2TxLineLn INTEGER
  sbcplaceholder1 INTEGER
  sbcV2FRMRMode INTEGER
  sbcds1V2Coding INTEGER
  sbcV2Lb INTEGER
  sbcclrperf INTEGER
  sbcreconfigure INTEGER

PCATBitsStatusEntry  
SEQUENCE    
  pbsIndex INTEGER
  pbslineok INTEGER
  pbsV2RxAIS INTEGER
  pbsV2RxLOS INTEGER
  pbsV2RxOOF INTEGER
  pbsV2RxBER INTEGER
  pbsV2RxOOFCnt INTEGER
  pbsV2RxBERCnt INTEGER
  pbsV2RxLOSCnt INTEGER
  pbsV2LCVCnt INTEGER

SCATBitsStatusEntry  
SEQUENCE    
  sbsIndex INTEGER
  sbslineok INTEGER
  sbsV2RxAIS INTEGER
  sbsV2RxLOS INTEGER
  sbsV2RxOOF INTEGER
  sbsV2RxBER INTEGER
  sbsV2RxOOFCnt INTEGER
  sbsV2RxBERCnt INTEGER
  sbsV2RxLOSCnt INTEGER
  sbsV2LCVCnt INTEGER

PCATDerConfigEntry  
SEQUENCE    
  pdcIndex INTEGER
  pdcds1V2TxLineLn INTEGER
  pdcplaceholder1 INTEGER
  pdcV2FRMRMode INTEGER
  pdcds1V2Coding INTEGER
  pdcV2Lb INTEGER
  pdcclrperf INTEGER
  pdcreconfigure INTEGER

SCATDerConfigEntry  
SEQUENCE    
  sdcIndex INTEGER
  sdcds1V2TxLineLn INTEGER
  sdcplaceholder1 INTEGER
  sdcV2FRMRMode INTEGER
  sdcds1V2Coding INTEGER
  sdcV2Lb INTEGER
  sdcclrperf INTEGER
  sdcreconfigure INTEGER

PCATDerStatusEntry  
SEQUENCE    
  pdsIndex INTEGER
  pdslineok INTEGER
  pdsV2TxReference INTEGER
  pdsV2RxAIS INTEGER
  pdsV2RxLOS INTEGER
  pdsV2RxOOF INTEGER
  pdsV2RxBER INTEGER
  pdsV2RxOOFCnt INTEGER
  pdsV2RxBERCnt INTEGER
  pdsV2RxLOSCnt INTEGER
  pdsV2LCVCnt INTEGER

SCATDerStatusEntry  
SEQUENCE    
  sdsIndex INTEGER
  sdslineok INTEGER
  sdsV2TxReference INTEGER
  sdsV2RxAIS INTEGER
  sdsV2RxLOS INTEGER
  sdsV2RxOOF INTEGER
  sdsV2RxBER INTEGER
  sdsV2RxOOFCnt INTEGER
  sdsV2RxBERCnt INTEGER
  sdsV2RxLOSCnt INTEGER
  sdsV2LCVCnt INTEGER

VcDocEntry  
SEQUENCE    
  vcDocLinkNo INTEGER
  vcDocEnable INTEGER
  vcDocVpi VirtualPathIdentifier
  vcDocVci VirtualCircuitIdentifier
  vcDocLinkSpeed INTEGER
  vcDocCLines INTEGER
  vcDocFifoSize INTEGER
  vcDocLowWater INTEGER
  vcDocHighWater INTEGER
  vcDocTestMode INTEGER
  vcDocTestVal Hex
  vcDocPriority INTEGER
  vcDocSuba INTEGER
  vcDocSaddr INTEGER
  vcDocClockFix INTEGER

VcStatEntry  
SEQUENCE    
  vcStatPortNo INTEGER
  vcStatRxState INTEGER
  vcStatTxState INTEGER
  vcStatFifoCount INTEGER
  vcStatOFlow INTEGER
  vcStatUFlow INTEGER
  vcStatReSync INTEGER
  vcStatInvented INTEGER
  vcStatRxCells Counter
  vcStatTxCells Counter
  vcStatRxSeqNo INTEGER
  vcStatTxSeqNo INTEGER
  vcStatLastError INTEGER
  vcStatLastCompare INTEGER
  vcStatTestErrors INTEGER

FRelayStatEntry  
SEQUENCE    
  fRelStatLinkNo INTEGER
  fRelStatLocSeq INTEGER
  fRelStatLocAck INTEGER
  fRelStatLocState INTEGER
  fRelStatLocStartT INTEGER
  fRelStatLocErrThr Counter
  fRelStatLocMec Counter
  fRelStatLocPoll Counter
  fRelStatRemSeq INTEGER
  fRelStatRemAck INTEGER
  fRelStatRemState INTEGER
  fRelStatRemStartT INTEGER
  fRelStatRemErrThr Counter
  fRelStatRemMec Counter
  fRelStatRemPoll Counter

FRelayConfEntry  
SEQUENCE    
  fRelConfLinkNo INTEGER
  fRelConfLinkEnab INTEGER
  fRelConfLinkMode INTEGER
  fRelConfLinkSpeed INTEGER
  fRelConfLinkCline INTEGER
  fRelConfLinkType INTEGER
  fRelConfN391 INTEGER
  fRelConfN392 INTEGER
  fRelConfN393 INTEGER
  fRelConfT391 INTEGER
  fRelConfT392 INTEGER

FraPStatEntry  
SEQUENCE    
  fraPStatDlci INTEGER
  fraPStatRxBCnt Counter
  fraPStatTxBCnt Counter
  fraPStatRxFCnt Counter
  fraPStatTxFCnt Counter
  fraPStatRxBRate Gauge
  fraPStatTxBRate Gauge
  fraPStatRxFRate Gauge
  fraPStatTxFRate Gauge
  fraPStatDERxF Counter
  fraPStatDisRxF Counter
  fraPStatPvcStat Hex
  fraPStatLinkState Hex
  fraPStatLocSeq INTEGER
  fraPStatLocAck INTEGER
  fraPStatLocStat INTEGER
  fraPStatLocStartT INTEGER
  fraPStatLocErrThr Counter
  fraPStatLocMec Counter
  fraPStatLocPoll Counter
  fraPStatRemSeq INTEGER
  fraPStatRemAck INTEGER
  fraPStatRemStat INTEGER
  fraPStatRemStartT INTEGER
  fraPStatRemErrThr Counter
  fraPStatRemMec Counter
  fraPStatRemPoll Counter
  fraPStatLastChangeM2 DateAndTime

FraPConfigEntry  
SEQUENCE    
  fraPConfigDlci INTEGER
  fraPConfigCir INTEGER
  fraPConfigCommitB INTEGER
  fraPConfigExcessB INTEGER
  fraVci VirtualCircuitIdentifier
  fraVpi VirtualPathIdentifier
  fraPConfigPriority INTEGER
  fraPConfigSuba INTEGER
  fraPConfigSaddr INTEGER
  fraPConfigValidity INTEGER
  fraPConfigDxivpi INTEGER
  fraPConfigDxivci INTEGER
  fraPConfigDximode INTEGER

FrbPStatEntry  
SEQUENCE    
  frbPStatDlci INTEGER
  frbPStatRxBCnt Counter
  frbPStatTxBCnt Counter
  frbPStatRxFCnt Counter
  frbPStatTxFCnt Counter
  frbPStatRxBRate Gauge
  frbPStatTxBRate Gauge
  frbPStatRxFRate Gauge
  frbPStatTxFRate Gauge
  frbPStatDERxF Counter
  frbPStatDisRxF Counter
  frbPStatPvcStat Hex
  frbPStatLinkState Hex
  frbPStatLocSeq INTEGER
  frbPStatLocAck INTEGER
  frbPStatLocStat INTEGER
  frbPStatLocStartT INTEGER
  frbPStatLocErrThr Counter
  frbPStatLocMec Counter
  frbPStatLocPoll Counter
  frbPStatRemSeq INTEGER
  frbPStatRemAck INTEGER
  frbPStatRemStat INTEGER
  frbPStatRemStartT INTEGER
  frbPStatRemErrThr Counter
  frbPStatRemMec Counter
  frbPStatRemPoll Counter
  frbPStatLastChangeM2 DateAndTime

FrbPConfigEntry  
SEQUENCE    
  frbPConfigDlci INTEGER
  frbPConfigCir INTEGER
  frbPConfigCommitB INTEGER
  frbPConfigExcessB INTEGER
  frbVpi VirtualPathIdentifier
  frbVci VirtualCircuitIdentifier
  frbPConfigPriority INTEGER
  frbPConfigSuba INTEGER
  frbPConfigSaddr INTEGER
  frbPConfigValidity INTEGER
  frbPConfigDxivpi INTEGER
  frbPConfigDxivci INTEGER
  frbPConfigDximode INTEGER

VcaEntry  
SEQUENCE    
  vcaVpi INTEGER
  vcaVci INTEGER
  vcaTxGCells Counter
  vcaTxGCellsClp1 Counter
  vcaRxGCells Counter
  vcaExcessCells Counter
  vcaPeakExceeds Counter
  vcaCellHead Hex
  vcaCellMask Hex
  vcaCellSwitchHead Hex
  vcaStartTime INTEGER
  vcaBucketControl Hex
  vcaBucket0CV Gauge
  vcaBucket0Max Gauge
  vcaBucket0Inc INTEGER
  vcaBucket1CV Gauge
  vcaBucket1Max Gauge
  vcaBucket1Inc INTEGER
  vcaBucket2CV Gauge
  vcaBucket2Max Gauge
  vcaBucket2Inc INTEGER
  vcaBucket3CV Gauge
  vcaBucket3Max Gauge
  vcaBucket3Inc INTEGER
  vcaType INTEGER
  vcaDstSlot INTEGER
  vcaDstLink INTEGER
  vcaDstVpi INTEGER
  vcaDstVci INTEGER
  vcaInternalVpi INTEGER
  vcaInternalVci INTEGER

VcbEntry  
SEQUENCE    
  vcbVpi INTEGER
  vcbVci INTEGER
  vcbTxGCells Counter
  vcbTxGCellsClp1 Counter
  vcbRxGCells Counter
  vcbExcessCells Counter
  vcbPeakExceeds Counter
  vcbCellHead Hex
  vcbCellMask Hex
  vcbCellSwitchHead Hex
  vcbStartTime INTEGER
  vcbBucketControl Hex
  vcbBucket0CV Gauge
  vcbBucket0Max Gauge
  vcbBucket0Inc INTEGER
  vcbBucket1CV Gauge
  vcbBucket1Max Gauge
  vcbBucket1Inc INTEGER
  vcbBucket2CV Gauge
  vcbBucket2Max Gauge
  vcbBucket2Inc INTEGER
  vcbBucket3CV Gauge
  vcbBucket3Max Gauge
  vcbBucket3Inc INTEGER
  vcbType INTEGER
  vcbDstSlot INTEGER
  vcbDstLink INTEGER
  vcbDstVpi INTEGER
  vcbDstVci INTEGER
  vcbInternalVpi INTEGER
  vcbInternalVci INTEGER

XpStatEntry  
SEQUENCE    
  xpIFace INTEGER
  xpRXCells Counter
  xpTXCells Counter
  xpBadVpiVci Counter
  xpRxOverflow Counter
  xpTxHighPrOver Counter
  xpTxLowPrOver Counter
  xpInputOverflow Counter
  xpDocErrors Counter
  xpLowPriorityFifo Counter
  xpEgDiscCells Counter
  xpIgDiscCells Counter

PdhPLCPEntry  
SEQUENCE    
  pdhPLCPLinkNo INTEGER
  pdhPLCPLinkEnable INTEGER
  pdhPLCPLinkStatusAffect INTEGER
  pdhPLCPLinkState INTEGER
  pdhPLCPPhyMode INTEGER
  pdhPLCPMode INTEGER
  pdhPLCPScrambler INTEGER
  pdhPLCP0x55 INTEGER
  pdhPLCPSmdsMode INTEGER
  pdhPLCPIdleCell INTEGER
  pdhPLCPLoopback INTEGER
  pdhPLCPClear INTEGER
  pdhPLCPReconfig INTEGER
  pdhPLCPLpbkTimeout INTEGER
  pdhPLCPChipType INTEGER
  pdhPLCPTXclock INTEGER
  pdhPLCPRXclock INTEGER
  pdhPLCPTXCells Counter
  pdhPLCPRXCells Counter
  pdhPLCPHCSErrs Counter
  pdhPLCPLOCDDefect INTEGER
  pdhPLCPYellowDefect INTEGER
  pdhPLCPLOFDefect INTEGER
  pdhPLCPLOCDAlarm INTEGER
  pdhPLCPYellowAlarm INTEGER
  pdhPLCPLOFAlarm INTEGER
  pdhPLCPFrameErrs Counter
  pdhPLCPBIP8Errs Counter
  pdhPLCPFEBEErrs Counter
  pdhPLCPES Counter
  pdhPLCPSES Counter
  pdhPLCPUAS Counter
  pdhPLCPFEES Counter
  pdhPLCPFESES Counter
  pdhPLCPFEUAS Counter

PdhDS3Entry  
SEQUENCE    
  pdhDS3TableValid INTEGER
  pdhDS3LinkNo INTEGER
  pdhDS3Framer INTEGER
  pdhDS3TxAIS INTEGER
  pdhDS3Clear INTEGER
  pdhDS3Reconfig INTEGER
  pdhDS3RxFrmFmt INTEGER
  pdhDS3RxIDL INTEGER
  pdhDS3FEACTxmt INTEGER
  pdhDS3Lcvs Counter
  pdhDS3FrameErrs Counter
  pdhDS3ParityErrs Counter
  pdhDS3CbitPrtyErrs Counter
  pdhDS3FEBEErrs Counter
  pdhDS3LOSDefect INTEGER
  pdhDS3OOFDefect INTEGER
  pdhDS3AISDefect INTEGER
  pdhDS3YellowDefect INTEGER
  pdhDS3ExBERDefect INTEGER
  pdhDS3LOSAlarm INTEGER
  pdhDS3LOFAlarm INTEGER
  pdhDS3AISAlarm INTEGER
  pdhDS3YellowAlarm INTEGER
  pdhDS3ExBERAlarm INTEGER
  pdhDS3LES Counter
  pdhDS3LSES Counter
  pdhDS3ES Counter
  pdhDS3ES2 Counter
  pdhDS3SES Counter
  pdhDS3SES2 Counter
  pdhDS3AISS Counter
  pdhDS3UAS Counter
  pdhDS3FarEndES Counter
  pdhDS3FarEndSES Counter
  pdhDS3FarEndUAS Counter

PdhE3Entry  
SEQUENCE    
  pdhE3TableValid INTEGER
  pdhE3LinkNo INTEGER
  pdhE3Framer INTEGER
  pdhE3Clear INTEGER
  pdhE3Reconfig INTEGER
  pdhE3TxmtTimMk INTEGER
  pdhE3PloadTypeLab INTEGER
  pdhE3TxTrlTrcIdLen INTEGER
  pdhE3TxTrcIdUH PhysAddress
  pdhE3TxTrcIdLH PhysAddress
  pdhE3RxExTrcIdUH PhysAddress
  pdhE3RxExTrcIdLH PhysAddress
  pdhE3FrameErrs Counter
  pdhE3Lcvs Counter
  pdhE3ParityErrs Counter
  pdhE3FEBEErrs Counter
  pdhE3LOSDefect INTEGER
  pdhE3OOFDefect INTEGER
  pdhE3AISDefect INTEGER
  pdhE3FERFDefect INTEGER
  pdhE3ExBERDefect INTEGER
  pdhE3LOSAlarm INTEGER
  pdhE3LOFAlarm INTEGER
  pdhE3AISAlarm INTEGER
  pdhE3FERFAlarm INTEGER
  pdhE3ExBERAlarm INTEGER
  pdhE3LES Counter
  pdhE3LSES Counter
  pdhE3ES Counter
  pdhE3SES Counter
  pdhE3AISS Counter
  pdhE3UAS Counter
  pdhE3RxTrlTrc PhysAddress
  pdhE3RxTrIdMis INTEGER
  pdhE3RxTrIdUnst INTEGER
  pdhE3RxPloadTypeLabMis INTEGER
  pdhE3RxPloadTypeLabUnst INTEGER

PlppCEntry  
SEQUENCE    
  plppCLinkNo INTEGER
  plppCLinkEnab INTEGER
  plppCCPLCPMode INTEGER
  plppCDS3Framer INTEGER
  plppCScrambler INTEGER
  plppC0x55 INTEGER
  plppCCLine INTEGER
  plppCLoopback INTEGER
  plppCSmdsMode INTEGER
  plppCPloadTypeLab INTEGER
  plppCTxTrlTrcIdLen INTEGER
  plppCTxTrcId PhysAddress
  plppCRxExTrcId PhysAddress

PlppSEntry  
SEQUENCE    
  plppSLinkNo INTEGER
  plppSCLines INTEGER
  plppSTXclock INTEGER
  plppSRXclock INTEGER
  plppSTXCells Counter
  plppSRXCells Counter
  plppSHCSErrs Counter
  plppSFrameErrs Counter
  plppSBIP8Errs Counter
  plppSFEBEErrs Counter
  plppSSPLRStatus INTEGER
  plppSDs3Lcvs Counter
  plppSDs3FrameErrs Counter
  plppSDs3ParityErrs Counter
  plppSDs3CbitPrtyErrs Counter
  plppSDs3FEBEErrs Counter
  plppSDs3RxAIS INTEGER
  plppSDs3RxRedAlarm INTEGER
  plppSDs3RxYellowAlarm INTEGER
  plppSPLCPRxYellowAlarm INTEGER
  plppsRxTrIdMis INTEGER
  plppsRxTrIdUnst INTEGER
  plppsRxPloadTypeLabMis INTEGER
  plppsRxPloadTypeLabUnst INTEGER
  plppsRxTrlTrc PhysAddress

PlppV2CEntry  
SEQUENCE    
  plppV2CLinkNo INTEGER
  plppV2CLinkEnab INTEGER
  plppV2CCPLCPMode INTEGER
  plppV2CDS3Framer INTEGER
  plppV2CScrambler INTEGER
  plppV2C0x55 INTEGER
  plppV2CLoopback INTEGER
  plppV2CSmdsMode INTEGER
  plppV2CFrmFmt INTEGER
  plppV2CTxAIS INTEGER

PlppV2SEntry  
SEQUENCE    
  plppV2SLinkNo INTEGER
  plppV2STXclock INTEGER
  plppV2SRXclock INTEGER
  plppV2STXCells Counter
  plppV2SRXCells Counter
  plppV2SHCSErrs Counter
  plppV2SFrameErrs Counter
  plppV2SBIP8Errs Counter
  plppV2SFEBEErrs Counter
  plppV2SSPLRStatus INTEGER
  plppV2SDs3FrmFmt INTEGER
  plppV2SDs3Lcvs Counter
  plppV2SDs3FrameErrs Counter
  plppV2SDs3ParityErrs Counter
  plppV2SDs3CbitPrtyErrs Counter
  plppV2SDs3FEBEErrs Counter
  plppV2SDs3RxAIS INTEGER
  plppV2SDs3RxRedAlarm INTEGER
  plppV2SDs3RxYellowAlarm INTEGER
  plppV2SPLCPRxYellowAlarm INTEGER
  plppV2SDs3FEACTxmt INTEGER
  plppV2SRxIDL INTEGER
  plppV2SLOC INTEGER
  plppV2SDs3LPBK INTEGER

PlppE1CEntry  
SEQUENCE    
  plppE1CLinkNo INTEGER
  plppE1CLinkEnab INTEGER
  plppE1CScrambler INTEGER
  plppE1C0x55 INTEGER
  plppE1CSmdsMode INTEGER
  plppE1CLpbk INTEGER

PlppE1SEntry  
SEQUENCE    
  plppE1SLinkNo INTEGER
  plppE1STXclock INTEGER
  plppE1SRXclock INTEGER
  plppE1STXCells Counter
  plppE1SRXCells Counter
  plppE1SHCSErrs Counter
  plppE1SCRCErrs Counter
  plppE1SFrameErrs Counter
  plppE1SFEBEErrs Counter
  plppE1SLcvs Counter
  plppE1SRxAIS INTEGER
  plppE1SRxOOF INTEGER
  plppE1SRxLOS INTEGER
  plppE1SRxLOF INTEGER
  plppE1SFerf INTEGER

PlppE3CEntry  
SEQUENCE    
  plppE3CLinkNo INTEGER
  plppE3CLinkEnab INTEGER
  plppE3CFramer INTEGER
  plppE3CPLCPMode INTEGER
  plppE3CScrambler INTEGER
  plppE3C0x55 INTEGER
  plppE3CLoopback INTEGER
  plppE3CSmdsMode INTEGER
  plppE3CTxmtTimMk INTEGER
  plppE3CPloadTypeLab INTEGER
  plppE3CTxTrlTrcIdLen INTEGER
  plppE3CTxTrcIdUH PhysAddress
  plppE3CTxTrcIdLH PhysAddress
  plppE3CRxExTrcIdUH PhysAddress
  plppE3CRxExTrcIdLH PhysAddress

PlppE3SEntry  
SEQUENCE    
  plppE3SLinkNo INTEGER
  plppE3STXclock INTEGER
  plppE3SRXclock INTEGER
  plppE3STXCells Counter
  plppE3SRXCells Counter
  plppE3SHCSErrs Counter
  plppE3SE3FrameErrs Counter
  plppE3SPLCPFrameErrs Counter
  plppE3SBIP8Errs Counter
  plppE3SFEBEErrs Counter
  plppE3SLcvs Counter
  plppE3SLcd INTEGER
  plppE3SRxTrlTrc PhysAddress
  plppE3SRxAIS INTEGER
  plppE3SRxOOF INTEGER
  plppE3SRxLOS INTEGER
  plppE3SRxLOF INTEGER
  plppE3SRxFERF INTEGER
  plppE3SPLCPRxLof INTEGER
  plppE3SPLCPRxYellowAlarm INTEGER
  plppE3SRxTrIdMis INTEGER
  plppE3SRxTrIdUnst INTEGER
  plppE3SRxPloadTypeLabMis INTEGER
  plppE3SRxPloadTypeLabUnst INTEGER

LFibreConfEntry  
SEQUENCE    
  lFibreConfLinkNo INTEGER
  lFibreConfLinkEnab INTEGER
  lFibreConfCLine INTEGER
  lFibreConfLoopback INTEGER

LFibreStatEntry  
SEQUENCE    
  lFibreStatLinkNo INTEGER
  lFibreStatCLines INTEGER
  lFibreStatHCSErrs Counter

Ds1Entry  
SEQUENCE    
  ds1LinkNo INTEGER
  ds1LineLength INTEGER
  ds1Framing INTEGER
  ds1Coding INTEGER
  ds1Tr INTEGER
  ds1Rt INTEGER
  ds1LOSDefect INTEGER
  ds1AISDefect INTEGER
  ds1OOFDefect INTEGER
  ds1YellowDefect INTEGER
  ds1LOSAlarm INTEGER
  ds1AISAlarm INTEGER
  ds1LOFAlarm INTEGER
  ds1YellowAlarm INTEGER
  ds1PdvCount Counter
  ds1Z16Count Counter
  ds1LcvCount Counter
  ds1BeeCount Counter
  ds1FerCount Counter
  ds1OofCount Counter
  ds1ClrStats INTEGER
  ds1Reconfig INTEGER
  ds1LineES Counter
  ds1LineSES Counter
  ds1ES Counter
  ds1SES Counter
  ds1AISS Counter
  ds1UAS Counter
  ds1TxClkSel INTEGER
  ds1ExBERDefect INTEGER
  ds1ExBERAlarm INTEGER

Ds3Entry  
SEQUENCE    
  ds3LinkNo INTEGER
  ds3Lb INTEGER
  ds3Err INTEGER
  ds3RXLos INTEGER
  ds3TXLoc INTEGER
  ds3RXErr INTEGER
  ds3RXAis INTEGER
  ds3TXAis INTEGER
  ds3TXLev INTEGER
  ds3Tr INTEGER
  ds3Rt INTEGER
  ds3Equal INTEGER
  ds3LOSAlarm INTEGER
  ds3Reconfig INTEGER

E1Entry  
SEQUENCE    
  e1LinkNo INTEGER
  e1LimType INTEGER
  e1Lb INTEGER
  e1FRMRMode INTEGER
  e1TxClkSel INTEGER
  e1TS16PayLd INTEGER
  e1TxAIS INTEGER
  e1GappedClk INTEGER
  e1IntrfType INTEGER
  e1ClrStats INTEGER
  e1Reconfig INTEGER
  se1SA4 INTEGER
  se1SA5 INTEGER
  se1SA6 INTEGER
  se1SA7 INTEGER
  se1SA8 INTEGER
  se1SI0 INTEGER
  se1SI1 INTEGER
  e1LOSDefect INTEGER
  e1OOFDefect INTEGER
  e1AISDefect INTEGER
  e1FerfDefect INTEGER
  e1ExBERDefect INTEGER
  e1LOSAlarm INTEGER
  e1LOFAlarm INTEGER
  e1AISAlarm INTEGER
  e1FerfAlarm INTEGER
  e1ExBERAlarm INTEGER
  e1SCRCErrs INTEGER
  e1SFrameErrs INTEGER
  e1SFEBEErrs INTEGER
  e1SLcvs INTEGER
  e1LineES Counter
  e1LineSES Counter
  e1ES Counter
  e1SES Counter
  e1AISS Counter
  e1UAS Counter

SoEntry  
SEQUENCE    
  soLinkNo INTEGER
  soLimType INTEGER
  soTimingRef INTEGER
  soTxEn0 INTEGER
  soTxEn1 INTEGER
  soLimDesc INTEGER
  soReconfig INTEGER

Ds1V2Entry  
SEQUENCE    
  ds1V2LinkNo INTEGER
  ds1V2LimType INTEGER
  ds1V2TxLineLn INTEGER
  ds1V2FRMRMode INTEGER
  ds1V2Coding INTEGER
  ds1V2Lb INTEGER
  ds1V2TxAIS INTEGER
  ds1V2GappedClk INTEGER
  ds1V2TxClkSel INTEGER
  ds1V2ClrStats INTEGER
  ds1V2Reconfig INTEGER
  ds1V2LOSDefect INTEGER
  ds1V2OOFDefect INTEGER
  ds1V2AISDefect INTEGER
  ds1V2FerfDefect INTEGER
  ds1V2BERDefect INTEGER
  ds1V2LOSAlarm INTEGER
  ds1V2LOFAlarm INTEGER
  ds1V2AISAlarm INTEGER
  ds1V2FerfAlarm INTEGER
  ds1V2BERAlarm INTEGER
  ds1V2FerCount INTEGER
  ds1V2BeeCount INTEGER
  ds1V2OCfCount INTEGER
  ds1V2LcvCount INTEGER
  ds1V2LineES Counter
  ds1V2LineSES Counter
  ds1V2ES Counter
  ds1V2SES Counter
  ds1V2AISS Counter
  ds1V2UAS Counter
  ds1V2ExBER Counter

Ds3V2Entry  
SEQUENCE    
  ds3V2LinkNo INTEGER
  ds3V2Lb INTEGER
  ds3V2LimType INTEGER
  ds3V2LimOK INTEGER
  ds3V2TxLBO INTEGER
  ds3V2TxClkSel INTEGER
  ds3V2LOSDefect INTEGER
  ds3V2LOSAlarm INTEGER
  ds3V2Reconfig INTEGER

E3Entry  
SEQUENCE    
  e3LinkNo INTEGER
  e3LimType INTEGER
  e3LimOK INTEGER
  e3EQSelect INTEGER
  e3Loopback INTEGER
  e3TxAIS INTEGER
  e3TxClkSel INTEGER
  e3LOSDefect INTEGER
  e3LOSAlarm INTEGER
  e3Reconfig INTEGER

HssiEntry  
SEQUENCE    
  hssiLinkNo INTEGER
  hssiType INTEGER
  hssiLimType INTEGER
  hssiLinkReady INTEGER
  hssiRemoteReady INTEGER
  hssiClockSrc INTEGER
  hssiLocalLoopback INTEGER
  hssiRemoteLoopback INTEGER
  hssiCtrTestMode INTEGER
  hssiReconfig INTEGER
  hssiLOSDefect INTEGER
  hssiLOSAlarm INTEGER

J2Entry  
SEQUENCE    
  j2LinkNo INTEGER
  j2FirmwareRev INTEGER
  j2TxEq INTEGER
  j2Lb INTEGER
  j2TxAIS INTEGER
  j2TxClkSel INTEGER
  j2ClrStats INTEGER
  j2Reconfig INTEGER
  j2TS97TS98 Hex
  j2QualClock INTEGER
  j2LOSDefect INTEGER
  j2OOFDefect INTEGER
  j2AISDefect INTEGER
  j2RAlmDefect INTEGER
  j2LOSAlarm INTEGER
  j2LOFAlarm INTEGER
  j2AISAlarm INTEGER
  j2RAlmAlarm INTEGER
  j2FerCount INTEGER
  j2RAlmCount INTEGER
  j2LcvCount INTEGER
  j2CrcCount Counter
  j2LineES Counter
  j2LineSES Counter
  j2ES Counter
  j2SES Counter
  j2AISS Counter
  j2UAS Counter

ScfEntry  
SEQUENCE    
  scfLinkNo INTEGER
  scfLimType INTEGER
  scfFirmwareRev INTEGER
  scfQualClock INTEGER
  scfContr INTEGER
  scfDCEDTE INTEGER
  scfLb INTEGER
  scfLineTiming INTEGER
  scfDataRate INTEGER
  scfClkSel INTEGER
  scfInterfaceType INTEGER
  scfReconfig INTEGER
  scfLOSDefect INTEGER
  scfLOSAlarm INTEGER

BillingEntry  
SEQUENCE    
  billSeq INTEGER
  billSvpi VirtualPathIdentifier
  billSvci VirtualCircuitIdentifier
  billDvpi VirtualPathIdentifier
  billDvci VirtualCircuitIdentifier
  billSslot INTEGER
  billSlink INTEGER
  billDslot INTEGER
  billDlink INTEGER
  billCalled E164
  billCalledSub E164SUB
  billCalling E164
  billCallingSub E164SUB
  billCellInC Counter
  billCellIn Counter
  billFrameIn Counter
  billByteInC Counter
  billByteIn Counter
  billCellOutC Counter
  billCellOut Counter
  billFrameOut Counter
  billByteOutC Counter
  billByteOut Counter
  billCause INTEGER
  billValid INTEGER
  billCLP1OutC Counter
  billCLP1Out Counter
  billTag INTEGER
  billStartM2 DateAndTime
  billEndM2 DateAndTime
  billFwdPCR INTEGER
  billBwdPCR INTEGER
  billFwdSCR INTEGER
  billBwdSCR INTEGER
  billFwdMBS INTEGER
  billBwdMBS INTEGER
  billFwdQOS INTEGER
  billBwdQOS INTEGER

QeDocBridgeEntry  
SEQUENCE    
  qeDocBridgeLinkNo INTEGER
  qeDocBridgeEnable INTEGER
  qeDocBridgeLink0Eligible INTEGER
  qeDocBridgeLink1Eligible INTEGER
  qeDocBridgeLink2Eligible INTEGER
  qeDocBridgeLink3Eligible INTEGER

QeDocTunEntry  
SEQUENCE    
  qeDocTunIndex INTEGER
  qeDocTunName DisplayString
  qeDocTunType INTEGER
  qeDocTunState INTEGER
  qeDocTunCallState INTEGER
  qeDocTunVPI VirtualPathIdentifier
  qeDocTunVCI VirtualCircuitIdentifier
  qeDocTunPriority INTEGER
  qeDocTunSlot INTEGER
  qeDocTunLink INTEGER
  qeDocTunInFrames Counter
  qeDocTunOutFrames Counter
  qeDocTunRemNet IpAddress
  qeDocTunRemMask IpAddress
  qeDocTunLocNet IpAddress
  qeDocTunLocMask IpAddress
  qeDocTunRemStartSkt INTEGER
  qeDocTunRemEndSkt INTEGER
  qeDocTunLocStartSkt INTEGER
  qeDocTunLocEndSkt INTEGER
  qeDocTunSktType INTEGER
  qeDocTunDestAddress E164
  qeDocTunDestSubAddress E164SUB
  qeDocTunValidity INTEGER
  qeDocTunLink0Eligible INTEGER
  qeDocTunLink1Eligible INTEGER
  qeDocTunLink2Eligible INTEGER
  qeDocTunLink3Eligible INTEGER
  qeDocTunRfc1483Encap INTEGER
  qeDocTunClp INTEGER

SdhCEntry  
SEQUENCE    
  sdhCLinkNo INTEGER
  sdhCLinkEnab INTEGER
  sdhCLoopTimer INTEGER
  sdhCLoopDiag INTEGER
  sdhCLoopLine INTEGER
  sdhCScrambler INTEGER
  sdhC0x55 INTEGER
  sdhSonetSdh INTEGER
  sdhClearCounts INTEGER
  sdhReconfig INTEGER
  sdhCLpbkTimeout INTEGER
  sdhStmSts INTEGER
  sdhAPSOnOff INTEGER
  sdhCIdleCell INTEGER

SdhSEntry  
SEQUENCE    
  sdhSLinkNo INTEGER
  sdhSTXclock INTEGER
  sdhSRXclock INTEGER
  sdhSSectLOS INTEGER
  sdhSSectOOF INTEGER
  sdhSSectLOF INTEGER
  sdhSLineAIS INTEGER
  sdhSLineFERF INTEGER
  sdhSPathAIS INTEGER
  sdhSPathYellow INTEGER
  sdhSPathFERF INTEGER
  sdhSPathLOP INTEGER
  sdhSPathLabelMM INTEGER
  sdhSExBERDefect INTEGER
  sdhSPathLabel INTEGER
  sdhSCellDelState INTEGER
  sdhSAlarmLOS INTEGER
  sdhSAlarmLOF INTEGER
  sdhSAlarmLineAIS INTEGER
  sdhSAlarmLineRFI INTEGER
  sdhSAlarmPathAIS INTEGER
  sdhSAlarmPathRFI INTEGER
  sdhSAlarmLOP INTEGER
  sdhSAlarmPLM INTEGER
  sdhSExBERAlarm INTEGER
  sdhSCorrHCS Counter
  sdhSUnCorrHCS Counter

SdhS2Entry  
SEQUENCE    
  sdhS2LinkNo INTEGER
  sdhSSectBIP8 Counter
  sdhSSectES Counter
  sdhSSectSES Counter
  sdhSLineBIP24 Counter
  sdhSLineES Counter
  sdhSLineSES Counter
  sdhSLineUAS Counter
  sdhSLineFC Counter
  sdhSPathBIP8 Counter
  sdhSPathES Counter
  sdhSPathSES Counter
  sdhSPathUAS Counter
  sdhSPathFC Counter
  sdhSLineFEBE Counter
  sdhSLineFarEndES Counter
  sdhSLineFarEndSES Counter
  sdhSLineFarEndUAS Counter
  sdhSLineFarEndFC Counter
  sdhSPathFEBE Counter
  sdhSPathFarEndES Counter
  sdhSPathFarEndSES Counter
  sdhSPathFarEndUAS Counter
  sdhSPathFarEndFC Counter

PvcResourceEntry  
SEQUENCE    
  pvcSlot INTEGER 0..15
  pvcLink INTEGER
  pvcVciStart VirtualCircuitIdentifier
  pvcVciEnd VirtualCircuitIdentifier
  pvcVpiStart VirtualPathIdentifier
  pvcVpiEnd VirtualPathIdentifier
  pvcVpStart VirtualPathIdentifier
  pvcVpEnd VirtualPathIdentifier
  pvcBackwardCellRateTotal INTEGER 0..16777215
  pvcLinkQoS INTEGER
  pvcMolnVci INTEGER
  pvcMolnVpi INTEGER
  pvcLowPriOverbookFactor INTEGER

PvcEntry  
SEQUENCE    
  pvcDSlot INTEGER 0..15
  pvcDLink INTEGER 0..3
  pvcDvci VirtualCircuitIdentifier
  pvcDvpi VirtualPathIdentifier
  pvcSSlot INTEGER 0..15
  pvcSLink INTEGER 0..3
  pvcSvci VirtualCircuitIdentifier
  pvcSvpi VirtualPathIdentifier
  pvcForwardPeakCellRate INTEGER 0..16777215
  pvcForwardPeakSize INTEGER 0..16777215
  pvcForwardPeakMode INTEGER
  pvcBackwardPeakCellRate INTEGER 0..16777215
  pvcBackwardPeakSize INTEGER 0..16777215
  pvcBackwardPeakMode INTEGER
  pvcForwardSustainedCellRate INTEGER 0..16777215
  pvcForwardSustainedSize INTEGER 0..16777215
  pvcForwardSustainedMode INTEGER
  pvcBackwardSustainedCellRate INTEGER 0..16777215
  pvcBackwardSustainedSize INTEGER 0..16777215
  pvcBackwardSustainedMode INTEGER
  pvcAuxForwardPeakCellRate INTEGER 0..16777215
  pvcAuxForwardPeakSize INTEGER 0..16777215
  pvcAuxForwardPeakMode INTEGER
  pvcAuxBackwardPeakCellRate INTEGER 0..16777215
  pvcAuxBackwardPeakSize INTEGER 0..16777215
  pvcAuxBackwardPeakMode INTEGER
  pvcAuxForwardSustainedCellRate INTEGER 0..16777215
  pvcAuxForwardSustainedSize INTEGER 0..16777215
  pvcAuxForwardSustainedMode INTEGER
  pvcAuxBackwardSustainedCellRate INTEGER 0..16777215
  pvcAuxBackwardSustainedSize INTEGER 0..16777215
  pvcAuxBackwardSustainedMode INTEGER
  pvcQoSClass INTEGER
  pvcStatus INTEGER
  pvcMulticast INTEGER
  pvcInternalVpi INTEGER
  pvcInternalVci INTEGER
  pvcNumLeaves INTEGER
  pvcDirection INTEGER

SvcResourceEntry  
SEQUENCE    
  svcSAP INTEGER 0..31
  svcHiLo INTEGER
  svcVciStart INTEGER 32..4095
  svcVciEnd INTEGER 32..4095
  svcVpiStart INTEGER 0..255
  svcVpiEnd INTEGER 0..255
  svcVpStart INTEGER 0..255
  svcVpEnd INTEGER 0..255
  svcBackwardCellRateTotal INTEGER 0..16777215
  svcBackwardCellRateAvailable INTEGER 0..16777215
  svcSigVci INTEGER 0..511
  svcSigVpi INTEGER 0..255
  svcSAPStatus INTEGER
  svcCDVTSize INTEGER
  svcIntType INTEGER
  svcPolicing INTEGER
  svcLowPriOverbookFactor INTEGER
  svcMaxSapConn INTEGER
  svcCurSapConn INTEGER
  svcLinkNo INTEGER 0..3
  svcVpiMapping INTEGER
  svcQosRoute INTEGER
  svcSwtch INTEGER
  svcRestart INTEGER
  svcE164Addr E164
  svcAutoSapOff INTEGER

SvcEntry  
SEQUENCE    
  svcId INTEGER
  svcDSlot INTEGER 0..15
  svcDLink INTEGER 0..3
  svcDvci VirtualCircuitIdentifier
  svcDvpi VirtualPathIdentifier
  svcDE164 E164
  svcDE164Sub E164SUB
  svcSSlot INTEGER 0..15
  svcSLink INTEGER 0..3
  svcSvci VirtualCircuitIdentifier
  svcSvpi VirtualPathIdentifier
  svcSE164 E164
  svcSE164Sub E164SUB
  svcForwardPeakCellRate INTEGER 0..16777215
  svcForwardPeakMode INTEGER
  svcBackwardPeakCellRate INTEGER 0..16777215
  svcBackwardPeakMode INTEGER
  svcForwardSustainableCellRate INTEGER 0..16777215
  svcForwardMaxBurstSize INTEGER 0..16777215
  svcForwardSustainableMode INTEGER
  svcBackwardSustainableCellRate INTEGER 0..16777215
  svcBackwardMaxBurstSize INTEGER 0..16777215
  svcBackwardSustainableMode INTEGER
  svcQoSClass INTEGER
  svcBillTag INTEGER
  svcDuration Counter
  svcType INTEGER
  svcStatus INTEGER
  svcNumLeaves INTEGER
  svcInternalVpi INTEGER
  svcInternalVci INTEGER

SPvcEntry  
SEQUENCE    
  sPvcId INTEGER
  sPvcCallId INTEGER
  sPvcLink INTEGER
  sPvcAddress E164
  sPvcForwardPeakCellRate INTEGER 0..16777215
  sPvcForwardPeakMode INTEGER
  sPvcBackwardPeakCellRate INTEGER 0..16777215
  sPvcBackwardPeakMode INTEGER
  sPvcForwardSustainableCellRate INTEGER 0..16777215
  sPvcForwardMaxBurstSize INTEGER 0..16777215
  sPvcForwardSustainableMode INTEGER
  sPvcBackwardSustainableCellRate INTEGER 0..16777215
  sPvcBackwardMaxBurstSize INTEGER 0..16777215
  sPvcBackwardSustainableMode INTEGER
  sPvcQoSClass INTEGER
  sPvcSourceVci VirtualCircuitIdentifier
  sPvcSourceVpi VirtualPathIdentifier
  sPvcTargetVci VirtualCircuitIdentifier
  sPvcTargetVpi VirtualPathIdentifier
  sPvcRetry INTEGER 0..1000
  sPvcConnectTime INTEGER
  sPvcNumberRetries INTEGER 0..1000
  sPvcFailures INTEGER
  sPvcAlertFailures INTEGER
  sPvcCauseDiag Q93bCauseDiag
  sPvcType INTEGER
  sPvcCallState INTEGER
  sPvcStatus INTEGER
  sPvcCauseDiagCode INTEGER
  sPvcMulticast INTEGER

SvcQ93bStatEntry  
SEQUENCE    
  svcQ93bStatSAP INTEGER 0..31
  svcQ93bStatActive INTEGER 0..16777215
  svcQ93bStatAccumalative INTEGER 0..16777215
  svcQ93bStatCallProcTx INTEGER 0..16777215
  svcQ93bStatConnTx INTEGER 0..16777215
  svcQ93bStatConnAckTx INTEGER 0..16777215
  svcQ93bStatSetupTx INTEGER 0..16777215
  svcQ93bStatRelTx INTEGER 0..16777215
  svcQ93bStatRelCmpltTx INTEGER 0..16777215
  svcQ93bStatRstTx INTEGER 0..16777215
  svcQ93bStatRstAckTx INTEGER 0..16777215
  svcQ93bStatStatTx INTEGER 0..16777215
  svcQ93bStatStatEnqTx INTEGER 0..16777215
  svcQ93bStatAddPtyTx INTEGER 0..16777215
  svcQ93bStatAddPtyAckTx INTEGER 0..16777215
  svcQ93bStatAddPtyRejTx INTEGER 0..16777215
  svcQ93bStatDropPtyTx INTEGER 0..16777215
  svcQ93bStatDropPtyAckTx INTEGER 0..16777215
  svcQ93bStatLstCauseTx INTEGER 0..16777215
  svcQ93bStatLstDiagTx INTEGER 0..16777215
  svcQ93bStatCallProcRx INTEGER 0..16777215
  svcQ93bStatConnRx INTEGER 0..16777215
  svcQ93bStatConnAckRx INTEGER 0..16777215
  svcQ93bStatSetupRx INTEGER 0..16777215
  svcQ93bStatRelRx INTEGER 0..16777215
  svcQ93bStatRelCmpltRx INTEGER 0..16777215
  svcQ93bStatRstRx INTEGER 0..16777215
  svcQ93bStatRstAckRx INTEGER 0..16777215
  svcQ93bStatStatRx INTEGER 0..16777215
  svcQ93bStatStatEnqRx INTEGER 0..16777215
  svcQ93bStatAddPtyRx INTEGER 0..16777215
  svcQ93bStatAddPtyAckRx INTEGER 0..16777215
  svcQ93bStatAddPtyRejRx INTEGER 0..16777215
  svcQ93bStatDropPtyRx INTEGER 0..16777215
  svcQ93bStatDropPtyAckRx INTEGER 0..16777215
  svcQ93bStatLstCauseRx INTEGER 0..16777215
  svcQ93bStatLstDiagRx INTEGER 0..16777215
  svcQ93bStatClr INTEGER
  svcQ93bStatDiagTx Q93bCauseDiag
  svcQ93bStatDiagRx Q93bCauseDiag

SvcQsaalStatEntry  
SEQUENCE    
  svcQsaalStatSAP INTEGER 0..31
  svcQsaalStatOutSduDisc INTEGER 0..16777215
  svcQsaalStatInPduErr INTEGER 0..16777215
  svcQsaalStatInPduDisc INTEGER 0..16777215
  svcQsaalStatOutPduErr INTEGER 0..16777215
  svcQsaalStatOutPduDisc INTEGER 0..16777215
  svcQsaalStatBgnTx INTEGER 0..16777215
  svcQsaalStatBgakTx INTEGER 0..16777215
  svcQsaalStatBgrejTx INTEGER 0..16777215
  svcQsaalStatEndTx INTEGER 0..16777215
  svcQsaalStatRsTx INTEGER 0..16777215
  svcQsaalStatRsakTx INTEGER 0..16777215
  svcQsaalStatSdTx INTEGER 0..16777215
  svcQsaalStatSdpTx INTEGER 0..16777215
  svcQsaalStatPollTx INTEGER 0..16777215
  svcQsaalStatStatTx INTEGER 0..16777215
  svcQsaalStatUstatTx INTEGER 0..16777215
  svcQsaalStatUdTx INTEGER 0..16777215
  svcQsaalStatMdTx INTEGER 0..16777215
  svcQsaalStatBgnRx INTEGER 0..16777215
  svcQsaalStatBgakRx INTEGER 0..16777215
  svcQsaalStatBgrejRx INTEGER 0..16777215
  svcQsaalStatEndRx INTEGER 0..16777215
  svcQsaalStatRsRx INTEGER 0..16777215
  svcQsaalStatRsakRx INTEGER 0..16777215
  svcQsaalStatSdRx INTEGER 0..16777215
  svcQsaalStatSdpRx INTEGER 0..16777215
  svcQsaalStatPollRx INTEGER 0..16777215
  svcQsaalStatStatRx INTEGER 0..16777215
  svcQsaalStatUstatRx INTEGER 0..16777215
  svcQsaalStatUdRx INTEGER 0..16777215
  svcQsaalStatMdRx INTEGER 0..16777215
  svcQsaalStatClr INTEGER

SvcCellRateEntry  
SEQUENCE    
  svcCRLinkNo INTEGER
  svcPCRCLP01Max INTEGER
  svcSCRMax INTEGER
  svcMBSMax INTEGER

SvcTrafficEntry  
SEQUENCE    
  svcTLinkNo INTEGER
  svcCBRallowed INTEGER
  svcVBRHallowed INTEGER
  svcVBRMallowed INTEGER
  svcVBRLUBRallowed INTEGER
  svcVBRLUBRsubtractpercent INTEGER

CeEntry  
SEQUENCE    
  ceLinkNo INTEGER
  ceEnable INTEGER
  ceMode INTEGER
  cePriority INTEGER
  cePvcValid INTEGER
  ceDstSlot INTEGER
  ceDstLink INTEGER
  ceDstVpi VirtualPathIdentifier
  ceDstVci VirtualCircuitIdentifier
  ceCDV INTEGER
  ceCDVMax INTEGER
  ceMulticast INTEGER
  ceXhInt INTEGER

CeStatEntry  
SEQUENCE    
  ceStatPortNo INTEGER
  ceStatReset INTEGER
  ceStatTxState INTEGER
  ceStatRxState INTEGER
  ceTxCnt Counter
  ceRxCnt Counter
  ceOflCnt Counter
  ceUflCnt Counter
  ceDisCnt Counter
  ceInvCnt Counter
  ceResCnt Counter
  ceFifoLvlCnt Counter

VeEntry  
SEQUENCE    
  veLinkNo INTEGER
  veEnable INTEGER
  veMode INTEGER
  vePriority INTEGER
  vePvcValid INTEGER
  veDstSlot INTEGER
  veDstLink INTEGER
  veDstVpi VirtualPathIdentifier
  veDstVci VirtualCircuitIdentifier
  veCDV INTEGER
  veCDVMax INTEGER
  veMulticast INTEGER
  veXhInt INTEGER

VeStatEntry  
SEQUENCE    
  veStatPortNo INTEGER
  veStatReset INTEGER
  veStatTxState INTEGER
  veStatRxState INTEGER
  veTxCnt Counter
  veRxCnt Counter
  veOflCnt Counter
  veUflCnt Counter
  veDisCnt Counter
  veInvCnt Counter
  veResCnt Counter
  veFifoLvlCnt Counter

CtrlEntry  
SEQUENCE    
  ctrlIndex INTEGER
  ctrlCodecType INTEGER
  ctrlCodecAction INTEGER
  ctrlCodecReq INTEGER
  ctrlCallType INTEGER
  ctrlCodecSta INTEGER
  ctrlChnlLpbk INTEGER
  ctrlFraming INTEGER
  ctrlChnlStat INTEGER
  ctrlFaultReason INTEGER

VidEntry  
SEQUENCE    
  vidIndex INTEGER
  vidStandard INTEGER
  vidTxVidReq INTEGER
  vidRxVidReq INTEGER
  vidViewPip INTEGER
  vidCompQual INTEGER
  vidEncFrameCount Counter
  vidDecFrameCount Counter
  vidState INTEGER
  vidInPresent INTEGER
  vidEncBitRate INTEGER
  vidDigLpbk INTEGER

AudEntry  
SEQUENCE    
  audIndex INTEGER
  audState INTEGER
  audPrefMode INTEGER
  audCommMode INTEGER
  audBitRate INTEGER
  audMuteInReq INTEGER
  audMuteOutReq INTEGER
  audMuteOutStat INTEGER
  audLpbk INTEGER
  audInVol INTEGER
  audOutVol INTEGER
  audInDelay INTEGER
  audOutDelay INTEGER
  audFaultReason INTEGER

DataEntry  
SEQUENCE    
  dataIndex INTEGER
  dataChnlType INTEGER
  dataPortSpeed INTEGER
  dataPortProt INTEGER
  dataHDLCcheck INTEGER
  dataChnlStat INTEGER
  dataBytesRcvd Counter
  dataBytesSent Counter
  dataResetStat INTEGER

MgmtEntry  
SEQUENCE    
  mgmtIndex INTEGER
  mgmtDescr DisplayString
  mgmtPortProt INTEGER
  mgmtPortSpeed INTEGER
  mgmtPortAddress IpAddress
  mgmtAddressMask IpAddress
  mgmtRemoteAddress IpAddress
  mgmtPortStat INTEGER
  mgmtBytesRcvd Counter
  mgmtBytesSent Counter
  mgmtResetStat INTEGER

OamEntry  
SEQUENCE    
  oamLinkNo INTEGER
  oamSegEndPoint INTEGER
  oamVcEndPoint INTEGER
  oamAisRdiGeneration INTEGER
  oamLastRxType INTEGER
  oamLastRxVpi VirtualPathIdentifier
  oamLastRxVci VirtualCircuitIdentifier
  oamRxCount Counter
  oamLastTxType INTEGER
  oamLastTxVpi VirtualPathIdentifier
  oamLastTxVci VirtualCircuitIdentifier
  oamTxCount Counter
  oamClearStats INTEGER

OamLoopbackEntry  
SEQUENCE    
  oamLoopbackLinkNo INTEGER
  oamLoopbackVpi VirtualPathIdentifier
  oamLoopbackVci VirtualCircuitIdentifier
  oamLoopbackSpan INTEGER
  oamLoopbackMaxNumCells INTEGER
  oamLoopbackNumCellsSent INTEGER
  oamLoopbackTimeOut INTEGER
  oamLoopbackActive INTEGER
  oamLoopbackResult INTEGER
  oamLoopbackLocId INTEGER

OamVcaEntry  
SEQUENCE    
  oamVcaVpi VirtualPathIdentifier
  oamVcaVci VirtualCircuitIdentifier
  oamVcaConnectionType INTEGER
  oamVcaVpcEndPoint INTEGER
  oamVcaAisRdiGeneration INTEGER
  oamVcaAisRdiState INTEGER
  oamVcaDefectType INTEGER
  oamVcaDefectNode INTEGER
  oamVcaDefectSlot INTEGER
  oamVcaDefectLink INTEGER
  oamVcaTrapEnable INTEGER
  oamVcaCC INTEGER
  oamVcaCCState INTEGER
  oamVcaPM INTEGER
  oamVcaPMBlockSize INTEGER
  oamVcaPMState INTEGER
  oamVcaBkwRptLosCells INTEGER
  oamVcaBkwRptMisCells INTEGER
  oamVcaBkwRptBip16 INTEGER
  oamVcaBkwRptSevErr INTEGER

OamVcbEntry  
SEQUENCE    
  oamVcbVpi VirtualPathIdentifier
  oamVcbVci VirtualCircuitIdentifier
  oamVcbConnectionType INTEGER
  oamVcbVpcEndPoint INTEGER
  oamVcbAisRdiGeneration INTEGER
  oamVcbAisRdiState INTEGER
  oamVcbDefectType INTEGER
  oamVcbDefectNode INTEGER
  oamVcbDefectSlot INTEGER
  oamVcbDefectLink INTEGER
  oamVcbTrapEnable INTEGER
  oamVcbCC INTEGER
  oamVcbCCState INTEGER
  oamVcbPM INTEGER
  oamVcbPMBlockSize INTEGER
  oamVcbPMState INTEGER
  oamVcbBkwRptLosCells INTEGER
  oamVcbBkwRptMisCells INTEGER
  oamVcbBkwRptBip16 INTEGER
  oamVcbBkwRptSevErr INTEGER

LmiEntry  
SEQUENCE    
  lmiLinkNo INTEGER
  lmiVpi VirtualPathIdentifier
  lmiVci VirtualCircuitIdentifier
  lmiType INTEGER
  lmiState INTEGER
  lmiFormat INTEGER
  lmiPrefix E164SUB
  lmiOnOff INTEGER
  lmiPollPeriod INTEGER
  lmiNoRspDown INTEGER
  lmiLinkMgmt INTEGER
  lmiConnectivity INTEGER
  lmiPrefixMod E164
  lmiEsi E164

LmiNetSideEntry  
SEQUENCE    
  lmiNetSideLinkNo INTEGER
  lmiNetSidePrefixId INTEGER
  lmiNetSidePrefix E164SUB
  lmiNetSidePrefixStatus INTEGER

LmiUserSideEntry  
SEQUENCE    
  lmiUserSideLinkNo INTEGER
  lmiUserSideAddressId INTEGER
  lmiUserSideAddress E164SUB
  lmiUserSideAddressStatus INTEGER

AlarmStatEntry  
SEQUENCE    
  alrStatSlotNo INTEGER
  slotCritStatus INTEGER
  slotMajorStatus INTEGER
  slotMinorStatus INTEGER
  link0CritStatus INTEGER
  link0MajorStatus INTEGER
  link0MinorStatus INTEGER
  link1CritStatus INTEGER
  link1MajorStatus INTEGER
  link1MinorStatus INTEGER
  link2CritStatus INTEGER
  link2MajorStatus INTEGER
  link2MinorStatus INTEGER
  link3CritStatus INTEGER
  link3MajorStatus INTEGER
  link3MinorStatus INTEGER

AlarmACOEntry  
SEQUENCE    
  alrACOslotNo INTEGER
  alrACOslotACO INTEGER
  alrACOlink0ACO INTEGER
  alrACOlink1ACO INTEGER
  alrACOlink2ACO INTEGER
  alrACOlink3ACO INTEGER

UserStatusEntry  
SEQUENCE    
  userInputNo INTEGER
  userInputEnable INTEGER
  userInputTrapEnable INTEGER
  userInputTrapDesc DisplayString
  userInputActiveState INTEGER
  userInputAlrClass INTEGER
  userInputStatus INTEGER

CacPerLinkEntry  
SEQUENCE    
  cacLinkNo INTEGER
  cacLinkSumE10 Gauge
  cacLinkSumE1T Gauge
  cacLinkObfPvc1 INTEGER
  cacLinkObfSvc1 INTEGER
  cacLinkSumE20 Gauge
  cacLinkSumE2T Gauge
  cacLinkObfPvc2 INTEGER
  cacLinkObfSvc2 INTEGER
  cacLinkTotalBwScrPcr INTEGER
  cacCurrentLinkUsage INTEGER
  cacMaxLinkUsage INTEGER
  cacLinkReset INTEGER
  cacLinkVersion INTEGER
  cacLinkEnable INTEGER
  cacLinkSignalMode INTEGER
  cacLinkState INTEGER

CacPerSapEntry  
SEQUENCE    
  cacSapNo INTEGER
  cacSapSumE1T Gauge
  cacSapSumE2T Gauge
  cacSapTotalBwScrPcr INTEGER
  cacCurrentSapUsage INTEGER
  cacMaxSapUsage INTEGER
  cacSapReset INTEGER

Defined Values

netcomm 1.3.6.1.4.1.251
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.251.1
OBJECT IDENTIFIER    

dv2 1.3.6.1.4.1.251.1.1
OBJECT IDENTIFIER    

dv2System 1.3.6.1.4.1.251.1.1.1
OBJECT IDENTIFIER    

dv2Slot0 1.3.6.1.4.1.251.1.1.2
OBJECT IDENTIFIER    

dv2Trace 1.3.6.1.4.1.251.1.1.3
OBJECT IDENTIFIER    

dv2SlipLine 1.3.6.1.4.1.251.1.1.4
OBJECT IDENTIFIER    

dv2StaticRoute 1.3.6.1.4.1.251.1.1.5
OBJECT IDENTIFIER    

dv2Clocks 1.3.6.1.4.1.251.1.1.6
OBJECT IDENTIFIER    

dv2VcDoc 1.3.6.1.4.1.251.1.1.8
OBJECT IDENTIFIER    

dv2FrRelay 1.3.6.1.4.1.251.1.1.9
OBJECT IDENTIFIER    

dv2VcStatus 1.3.6.1.4.1.251.1.1.10
OBJECT IDENTIFIER    

dv2PLPP 1.3.6.1.4.1.251.1.1.11
OBJECT IDENTIFIER    

dv2LocalFibre 1.3.6.1.4.1.251.1.1.12
OBJECT IDENTIFIER    

dv2DS 1.3.6.1.4.1.251.1.1.13
OBJECT IDENTIFIER    

dv2Billing 1.3.6.1.4.1.251.1.1.14
OBJECT IDENTIFIER    

dv2QeDoc 1.3.6.1.4.1.251.1.1.15
OBJECT IDENTIFIER    

dv2SDH 1.3.6.1.4.1.251.1.1.16
OBJECT IDENTIFIER    

dv2Pvc 1.3.6.1.4.1.251.1.1.17
OBJECT IDENTIFIER    

dv2Svc 1.3.6.1.4.1.251.1.1.18
OBJECT IDENTIFIER    

dv2CE 1.3.6.1.4.1.251.1.1.19
OBJECT IDENTIFIER    

dv2VE 1.3.6.1.4.1.251.1.1.20
OBJECT IDENTIFIER    

dv2SystemClocks 1.3.6.1.4.1.251.1.1.21
OBJECT IDENTIFIER    

mjlimSlipLine 1.3.6.1.4.1.251.1.1.22
OBJECT IDENTIFIER    

mjlimSystem 1.3.6.1.4.1.251.1.1.23
OBJECT IDENTIFIER    

vidInCfg 1.3.6.1.4.1.251.1.1.24
OBJECT IDENTIFIER    

vidOutCfg 1.3.6.1.4.1.251.1.1.25
OBJECT IDENTIFIER    

vidInSta 1.3.6.1.4.1.251.1.1.26
OBJECT IDENTIFIER    

vidOutSta 1.3.6.1.4.1.251.1.1.27
OBJECT IDENTIFIER    

audInCfg 1.3.6.1.4.1.251.1.1.28
OBJECT IDENTIFIER    

audOutCfg 1.3.6.1.4.1.251.1.1.29
OBJECT IDENTIFIER    

audInSta 1.3.6.1.4.1.251.1.1.30
OBJECT IDENTIFIER    

audOutSta 1.3.6.1.4.1.251.1.1.31
OBJECT IDENTIFIER    

dataCfg 1.3.6.1.4.1.251.1.1.32
OBJECT IDENTIFIER    

dataSta 1.3.6.1.4.1.251.1.1.33
OBJECT IDENTIFIER    

mjlimControl 1.3.6.1.4.1.251.1.1.34
OBJECT IDENTIFIER    

dv2PDH 1.3.6.1.4.1.251.1.1.35
OBJECT IDENTIFIER    

dv2Oam 1.3.6.1.4.1.251.1.1.36
OBJECT IDENTIFIER    

dv2Lmi 1.3.6.1.4.1.251.1.1.37
OBJECT IDENTIFIER    

dv2AlarmHandler 1.3.6.1.4.1.251.1.1.38
OBJECT IDENTIFIER    

dv2Cac 1.3.6.1.4.1.251.1.1.39
OBJECT IDENTIFIER    

dv2MS2FRAC 1.3.6.1.4.1.251.1.1.40
OBJECT IDENTIFIER    

dv2aal5 1.3.6.1.4.1.251.1.1.41
OBJECT IDENTIFIER    

vhsystem 1.3.6.1.4.1.251.1.1.42
OBJECT IDENTIFIER    

vhcontrol 1.3.6.1.4.1.251.1.1.43
OBJECT IDENTIFIER    

vhmgmt 1.3.6.1.4.1.251.1.1.44
OBJECT IDENTIFIER    

sysMemEnd 1.3.6.1.4.1.251.1.1.1.1
The current end of run-time allocated memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

sysInitialMemB 1.3.6.1.4.1.251.1.1.1.4
initial number of memory items.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCurrentMemB 1.3.6.1.4.1.251.1.1.1.5
Current number of memory items.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysInitialSema 1.3.6.1.4.1.251.1.1.1.6
Initial number of semaphores.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCurrentSema 1.3.6.1.4.1.251.1.1.1.7
Current number of semaphores.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysInitialQItems 1.3.6.1.4.1.251.1.1.1.8
Initial number of queue items.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCurrentQItems 1.3.6.1.4.1.251.1.1.1.9
Current number of queue items.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysInitialQs 1.3.6.1.4.1.251.1.1.1.10
Initial number of queues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCurrentQs 1.3.6.1.4.1.251.1.1.1.11
Current number of queues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysInitialPorts 1.3.6.1.4.1.251.1.1.1.12
Initial number of ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysCurrentPorts 1.3.6.1.4.1.251.1.1.1.13
Current number of ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysDefaultCellMode 1.3.6.1.4.1.251.1.1.1.14
This flag indicates whether the cell interface is operating in default mode. If yes(2) then this indicates that the daughter card processor is not running its correct code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sysLinkTable 1.3.6.1.4.1.251.1.1.1.15
This table contains information about each link on this slot controller.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLinkEntry

sysLinkEntry 1.3.6.1.4.1.251.1.1.1.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysLinkEntry  

sysLkLinkNo 1.3.6.1.4.1.251.1.1.1.15.1.1
The link number on the slot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  


sysLkState 1.3.6.1.4.1.251.1.1.1.15.1.3
Status of the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), stop(3)  

sysLkTxCells 1.3.6.1.4.1.251.1.1.1.15.1.4
Number of cells sent from link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysLkRxCells 1.3.6.1.4.1.251.1.1.1.15.1.5
Number of cells received to link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sysLkTxRate 1.3.6.1.4.1.251.1.1.1.15.1.6
Cells per second sent from link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sysLkRxRate 1.3.6.1.4.1.251.1.1.1.15.1.7
Cells per second received to link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sysLkTxMaxRate 1.3.6.1.4.1.251.1.1.1.15.1.8
Maximum cells per second transmitted from link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sysLkRxMaxRate 1.3.6.1.4.1.251.1.1.1.15.1.9
Maximum cells per second received to link
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

sysLkResetStats 1.3.6.1.4.1.251.1.1.1.15.1.10
Set to yes(2) to reset the link statistics
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sysLkClockSrc 1.3.6.1.4.1.251.1.1.1.15.1.11
This specifies where the link obtains its clock
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), low-quality(2), high-quality(3), loop-timed(4), local(5)  

sysLkResetResrc 1.3.6.1.4.1.251.1.1.1.15.1.12
Set to yes(2) to reset the link resources
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sysLKEgCLPThreshold 1.3.6.1.4.1.251.1.1.1.15.1.13
Transmit CLP1 threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKIgCLPThreshold 1.3.6.1.4.1.251.1.1.1.15.1.14
Receive CLP1 threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKEgEFCIThreshold 1.3.6.1.4.1.251.1.1.1.15.1.15
Transmit EFCI threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKIgEFCIThreshold 1.3.6.1.4.1.251.1.1.1.15.1.16
Receive EFCI threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKEgLogBuffer 1.3.6.1.4.1.251.1.1.1.15.1.17
Transmit logic buffer size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKIgLogBuffer 1.3.6.1.4.1.251.1.1.1.15.1.18
Receive logic buffer size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

sysLKEgFIFODepth 1.3.6.1.4.1.251.1.1.1.15.1.19
Transmit FIFO Depth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysLKIgFIFODepth 1.3.6.1.4.1.251.1.1.1.15.1.20
Receive FIFO Depth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysLKEgMemBlockId 1.3.6.1.4.1.251.1.1.1.15.1.21
Transmit Memory Block ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mem-4k(4), mem-16k(16), mem-64k(63)  

sysLKIgMemBlockId 1.3.6.1.4.1.251.1.1.1.15.1.22
Receive Memory Block ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mem-4k(4), mem-16k(16), mem-64k(63)  

sysDbTable 1.3.6.1.4.1.251.1.1.1.16
This table contains information about the internal buffer pool on the slot controller.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysDbEntry

sysDbEntry 1.3.6.1.4.1.251.1.1.1.16.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysDbEntry  

sysDbIndex 1.3.6.1.4.1.251.1.1.1.16.1.1
Buffer class number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..10  

sysDbSize 1.3.6.1.4.1.251.1.1.1.16.1.2
Five classes of buffers are used:- 16, 128, 368 and 1600 bytes plus 48 bytes for cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER buff16(16), buff128(128), buff368(368), buff1600(1600), cells(48), signal-quota(1), ip-quota(2)  

sysDbInitial 1.3.6.1.4.1.251.1.1.1.16.1.3
This is the initial number of buffers available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysDbCurrent 1.3.6.1.4.1.251.1.1.1.16.1.4
This is the current number of buffers available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysAuthenticateTable 1.3.6.1.4.1.251.1.1.1.17
Table containing all the authentication tuples for this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysAuthenticateEntry

sysAuthenticateEntry 1.3.6.1.4.1.251.1.1.1.17.1
An authentication tuple. A PDU from the ipaddress specified that contains the community, will have access to this MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysAuthenticateEntry  

sysAuIndex 1.3.6.1.4.1.251.1.1.1.17.1.1
Index, identifying each entry in the authentication table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sysAuIpaddress 1.3.6.1.4.1.251.1.1.1.17.1.2
The network address of the manager that has authentication access to this agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

sysAuCommunity 1.3.6.1.4.1.251.1.1.1.17.1.3
The SNMP community for which the ipaddress is authenticated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

sysAuAccess 1.3.6.1.4.1.251.1.1.1.17.1.4
Access permission for this ipaddress/community tuple. Write access is required for performing SNMP sets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(3)  

sysAuSendTraps 1.3.6.1.4.1.251.1.1.1.17.1.5
Set to send-none(2) to prevent traps being sent to this host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send-all(1), send-none(2)  

sysAuValidity 1.3.6.1.4.1.251.1.1.1.17.1.6
Set to invalid(2) to delete this row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

sysLastTrapMessage 1.3.6.1.4.1.251.1.1.1.18
This is used to contain the last trap string sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..70)  

sysConfigChanged 1.3.6.1.4.1.251.1.1.1.19
This indicates that a new file is available. This should not be set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sysConfigFile 1.3.6.1.4.1.251.1.1.1.20
Set to read(2) to re-read the file. Set to write(3) to write the existing configuration to .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-action(1), read(2), write(3)  

sysCompileTime 1.3.6.1.4.1.251.1.1.1.21
Date and time of link in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slotNumber 1.3.6.1.4.1.251.1.1.1.22
Slot Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

sysLastResetTimeM2 1.3.6.1.4.1.251.1.1.1.23
Date and time board was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

sysCurrentTimeM2 1.3.6.1.4.1.251.1.1.1.24
Current date and time in the form dd Mon yyyy hh:mm:ss. For example:- 15 Aug 1994 10:12:21
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

limTypeStatus 1.3.6.1.4.1.251.1.1.1.25
Describes whether the lim and the DOC card are compatible.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), compatible(2), not-compatible(3)  

slot0IntIp 1.3.6.1.4.1.251.1.1.2.1
IP address of SLOT 0 for ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

slot0XpInUse 1.3.6.1.4.1.251.1.1.2.2
The current Switch Fabric in Service
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(3), main-in-service(1), standby-in-service(2)  

slot0XpToUse 1.3.6.1.4.1.251.1.1.2.3
This indicates the switch fabric card you want the switch to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(3), main(1), standby(2), not-applicable(4)  

slot0StandbyXp 1.3.6.1.4.1.251.1.1.2.4
Set to yes(1) to enable standby switch fabric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

slot0PsuTable 1.3.6.1.4.1.251.1.1.2.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Slot0PsuEntry

slot0PsuEntry 1.3.6.1.4.1.251.1.1.2.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Slot0PsuEntry  

slot0PsuIndex 1.3.6.1.4.1.251.1.1.2.5.1.1
Power-supply number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

slot0PsuFault 1.3.6.1.4.1.251.1.1.2.5.1.2
If fault(2) then this indicates a fault condition in the power-supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(3), ok(1), fault(2)  

slot0PsuTestFault 1.3.6.1.4.1.251.1.1.2.5.1.3
If set to yes(1) the control button on the PSU module has been set to test fault mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), not-applicable(3)  

slot0PsuVoltage 1.3.6.1.4.1.251.1.1.2.5.1.4
This is a the voltage generated by the power-supply in millivolts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0PsuTemp 1.3.6.1.4.1.251.1.1.2.5.1.5
This is the temperature of the power-supply module in degrees celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0PsuFanASpeed 1.3.6.1.4.1.251.1.1.2.5.1.6
This is the rotation speed of FAN A in RPM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0PsuFanBSpeed 1.3.6.1.4.1.251.1.1.2.5.1.7
This is the rotation speed of FAN B in RPM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0PsuFanCSpeed 1.3.6.1.4.1.251.1.1.2.5.1.8
This is the rotation speed of FAN C in RPM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0PsuReset 1.3.6.1.4.1.251.1.1.2.5.1.9
If set to yes(2) then the power-supply module is returned to its initial state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), not-applicable(3)  

slot0PsuType 1.3.6.1.4.1.251.1.1.2.5.1.10
Shows the type of PSU fitted into switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v1-ATM-SWITCH(1), v2-ATM-SWITCH(2), v3-ATM-SWITCH(3), v4-ATM-SWITCH(4), v5-ATM-SWITCH(5)  

slot0PsuFanFail 1.3.6.1.4.1.251.1.1.2.5.1.11
Set to yes(2) if the fan fails.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slot0PsuTooHot 1.3.6.1.4.1.251.1.1.2.5.1.12
Set to yes(2) if the PSU is too hot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), not-applicable(3)  

slot0PsuFrontTooHot 1.3.6.1.4.1.251.1.1.2.5.1.13
Set to yes(2) if the Front is too hot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), not-applicable(3)  

slot0PhyTable 1.3.6.1.4.1.251.1.1.2.6
This table summarises the hardware installed in the switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Slot0PhyEntry

slot0PhyEntry 1.3.6.1.4.1.251.1.1.2.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Slot0PhyEntry  

slot0PhySlotNo 1.3.6.1.4.1.251.1.1.2.6.1.1
This is the slot number in the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

slot0PhyName 1.3.6.1.4.1.251.1.1.2.6.1.2
This is a mnemonic name for the slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

slot0PhyType 1.3.6.1.4.1.251.1.1.2.6.1.3
This enumerated type defines the type of card fitted in the slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), dxdoc(128), qedoc(129), vcdoc(130), cp(133), cl(134), cs(135), hp(136), hl(137), hs(138), ce(139), ve(140), chfrc(141), eth(142), frac(143), trdoc(144), sce(145), dv2ap(146), dv2as(147), vsm(148), ipas(149), ipap(150)  

slot0PhyDlim 1.3.6.1.4.1.251.1.1.2.6.1.4
This is the type of DLIM fitted to the slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), dx21(2), dx27(3), d2G703(4), d8G703(5), d34G703(6), dAUI(7), dlfLIM(8), dds1(9), dds3(10), dhssi(11), dsolim(12), ds3-2c(13), e3-2c(14), e1-dual(15), e1-quad(16), ds1-dual(17), ds1-quad(18), jpeg(19), j2-dual(20), j2-quad(21), vh320(22), si-dual(23), si-quad(24), delim(25), mpg2v(26), qtlim(27)  

slot0PhySwVer 1.3.6.1.4.1.251.1.1.2.6.1.5
Version of the software running on this slot controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slot0PhyState 1.3.6.1.4.1.251.1.1.2.6.1.6
The state of the slot, -(1) indicates no card fitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), bootmode(2), active(3), shutdown(4), shadow(5)  

slot0PhyReset 1.3.6.1.4.1.251.1.1.2.6.1.7
Setting to yes(2) will reset the slot - use with care
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slot0PhyReqState 1.3.6.1.4.1.251.1.1.2.6.1.8
Setting to shutdown(2) will stop the slot running. The slot should only be set to main(3) or shadow(4) if the slot is operating in hardware redundant mode with an adjacent slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), shutdown(2), main(3), shadow(4)  

slot0PhyStateChange 1.3.6.1.4.1.251.1.1.2.6.1.10
Indicates link has changed state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

slot0PhyLinkedSlot 1.3.6.1.4.1.251.1.1.2.6.1.11
This is used in hardware redundancy mode. If set to 0 then there is no associated slot. Otherwise the value is the slot number that will be used if this slot fails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

slot0PhyLink0State 1.3.6.1.4.1.251.1.1.2.6.1.12
This contains link 0 status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stop(4), up(1), down(2), off(3), reset(5)  

slot0PhyLink1State 1.3.6.1.4.1.251.1.1.2.6.1.13
This contains link 1 status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stop(4), up(1), down(2), off(3), reset(5)  

slot0PhyLink2State 1.3.6.1.4.1.251.1.1.2.6.1.14
This contains link 2 status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stop(4), up(1), down(2), off(3), reset(5)  

slot0PhyLink3State 1.3.6.1.4.1.251.1.1.2.6.1.15
This contains link 3 status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stop(4), up(1), down(2), off(3), reset(5)  

slot0PhySlotSerNo 1.3.6.1.4.1.251.1.1.2.6.1.16
Serial number of the slot controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slot0PhySlotHwVerNo 1.3.6.1.4.1.251.1.1.2.6.1.17
Hardware version number and revision of the slot controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slot0PhyDocSerNo 1.3.6.1.4.1.251.1.1.2.6.1.18
Serial number of the DOC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slot0PhyDocHwVerNo 1.3.6.1.4.1.251.1.1.2.6.1.19
Hardware version number and revision of the DOC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

slot0PhyMacAddress 1.3.6.1.4.1.251.1.1.2.6.1.20
MAC address of the slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

slot0PhyChangeTimeM2 1.3.6.1.4.1.251.1.1.2.6.1.21
Last date and time link changed state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

slot0PhyLstChngLnkNum 1.3.6.1.4.1.251.1.1.2.6.1.22
Holds the link number of the last link status to change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER link-0(1), link-1(2), link-2(3), link-3(4), none(5)  

slot0PhyLstChngPrevLnkStat 1.3.6.1.4.1.251.1.1.2.6.1.23
Holds the previous link state of the last link number whose status changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), off(3), stop(4), reset(5), none(6)  

slot0MaxUpSlots 1.3.6.1.4.1.251.1.1.2.7
The maximum number of slots that have been up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0CurrentUpSlots 1.3.6.1.4.1.251.1.1.2.8
The number of slots currently up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slot0IsStandbySlot0 1.3.6.1.4.1.251.1.1.2.9
Set to yes(2) if there is a redundant slot 0 available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(5), not-applicable(4), no(1), yes(2), not-ready(6)  

slot0TftpToStandby 1.3.6.1.4.1.251.1.1.2.10
Set to no(2) to stop files being transferred to the out of service slot0 automatically when they are changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(1)  

slot0MibBroadcast 1.3.6.1.4.1.251.1.1.2.11
Broadcasts particular tables to all other slots.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), snmp-Authentication(2)  

slot0Address 1.3.6.1.4.1.251.1.1.2.14
The E.164 address of the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

slot0InUse 1.3.6.1.4.1.251.1.1.2.15
The Slot 0 card Redundancy Status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(5), main-in-service(1), standby-in-service(2), main-out-of-service(3), standby-out-of-service(4), main-disabled(6), standby-disabled(7)  

slot0ToUse 1.3.6.1.4.1.251.1.1.2.16
This indicates the Slot 0 card you want the switch to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(3), main(1), standby(2), not-applicable(4), disable(5)  

slot0redmode 1.3.6.1.4.1.251.1.1.2.17
The Slot 0 card Redundancy mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(4), non-redundant(1), basic-redundancy(2), enhanced-redundancy(3)  

slot0IntIPMask 1.3.6.1.4.1.251.1.1.2.18
IP Mask for Internal Subnet. To reconfigure, Save new configuration and perform then warm Start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slot0SwitchId 1.3.6.1.4.1.251.1.1.2.19
Switch ID for this Apex node
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

ntms0doc 1.3.6.1.4.1.251.1.1.2.20
Signifies that the S0DOC is capable of communicating with an NTM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slot0LecsPrefix 1.3.6.1.4.1.251.1.1.2.21
The NSAP network prefix for LECS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

slot0LecsESI 1.3.6.1.4.1.251.1.1.2.22
The NSAP ESI for LECS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

clksTxTimingRef 1.3.6.1.4.1.251.1.1.6.1
Transmit Timing Reference
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system-timing-reference(1), local-link0(2), local-link1(3), local-oscillator(4)  

clksSysRefSlotNum 1.3.6.1.4.1.251.1.1.6.2
System Timing Reference Slot Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

clksSysRefLinkNum 1.3.6.1.4.1.251.1.1.6.3
System Timing Reference Link Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER link0(1), link1(2), none(3)  

clksSysRefError 1.3.6.1.4.1.251.1.1.6.4
System Timing Error
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slot0(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), none(17)  

autoRevert 1.3.6.1.4.1.251.1.1.21.1
Automatic Revert after Timing Source Recovery
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

revertTimer 1.3.6.1.4.1.251.1.1.21.2
Revert Timer in Seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..60  

forceRevert 1.3.6.1.4.1.251.1.1.21.3
Force Immediate Revert
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

forceSecondary 1.3.6.1.4.1.251.1.1.21.4
Force Secondary Source Timing
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

alarmStatus 1.3.6.1.4.1.251.1.1.21.5
Timing Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), minor(2), major(3)  

inService 1.3.6.1.4.1.251.1.1.21.6
Card in Service
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri-line(2), pri-internal(3), pri-stratum3(4), pri-external(5), sec-line(6), sec-internal(7), sec-stratum3(8), sec-external(9), pri-plcp(10), sec-plcp(11)  

primaryClockTable 1.3.6.1.4.1.251.1.1.21.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PrimaryEntry

primaryEntry 1.3.6.1.4.1.251.1.1.21.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PrimaryEntry  

pIndex 1.3.6.1.4.1.251.1.1.21.7.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pValidSource 1.3.6.1.4.1.251.1.1.21.7.1.2
Valid Timing Source
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pOnOffLine 1.3.6.1.4.1.251.1.1.21.7.1.3
On / Off line Toggle
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pSlotNumber 1.3.6.1.4.1.251.1.1.21.7.1.4
Primary Source Slot Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

pSysRefSelect 1.3.6.1.4.1.251.1.1.21.7.1.5
System Reference Select
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER link0(1), link1(2), link2(3), link3(4), local-oscillator(5)  

pActiveTimingSource 1.3.6.1.4.1.251.1.1.21.7.1.6
Active Timing Reference
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER line(1), internal(2), plcp(3)  

pInputLineOk 1.3.6.1.4.1.251.1.1.21.7.1.7
Input Line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pSysRefTimingOk 1.3.6.1.4.1.251.1.1.21.7.1.8
System Reference Timing OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

secondaryClockTable 1.3.6.1.4.1.251.1.1.21.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecondaryEntry

secondaryEntry 1.3.6.1.4.1.251.1.1.21.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SecondaryEntry  

sIndex 1.3.6.1.4.1.251.1.1.21.8.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sValidSource 1.3.6.1.4.1.251.1.1.21.8.1.2
Valid Timing Source
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sOnOffLine 1.3.6.1.4.1.251.1.1.21.8.1.3
On / Off line Toggle
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

sSlotNumber 1.3.6.1.4.1.251.1.1.21.8.1.4
Secondary Source Slot Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

sSysRefSelect 1.3.6.1.4.1.251.1.1.21.8.1.5
System Reference Select
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER link0(1), link1(2), link2(3), link3(4), local-oscillator(5)  

sActiveTimingSource 1.3.6.1.4.1.251.1.1.21.8.1.6
Active Timing Reference
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER line(1), internal(2), plcp(3)  

sInputLineOk 1.3.6.1.4.1.251.1.1.21.8.1.7
Input Line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sSysRefTimingOk 1.3.6.1.4.1.251.1.1.21.8.1.8
System Reference Timing OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

str3Configured 1.3.6.1.4.1.251.1.1.21.9
CAT Card present
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pCATcontrolTable 1.3.6.1.4.1.251.1.1.21.10
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATcontrolEntry

pCATcontrolEntry 1.3.6.1.4.1.251.1.1.21.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATcontrolEntry  

pccIndex 1.3.6.1.4.1.251.1.1.21.10.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pccatlimtype 1.3.6.1.4.1.251.1.1.21.10.1.2
Type of CAT LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), t1(2), e1(3)  

pccatsendcode 1.3.6.1.4.1.251.1.1.21.10.1.3
Send code to NTM LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pccatactivate 1.3.6.1.4.1.251.1.1.21.10.1.4
Activate NTM Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pccatsendconfig 1.3.6.1.4.1.251.1.1.21.10.1.5
Send Configuration to NTM LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pccatbytestransferred 1.3.6.1.4.1.251.1.1.21.10.1.6
Code bytes transferred to NTM LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pccatfilexferstat 1.3.6.1.4.1.251.1.1.21.10.1.7
File transfer status as reported by Slot 0
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7)  

pcatforcesecext 1.3.6.1.4.1.251.1.1.21.10.1.8
Force the secondary external
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pcatforcesecstr3 1.3.6.1.4.1.251.1.1.21.10.1.9
Force the secondary stratum 3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pcatcommand 1.3.6.1.4.1.251.1.1.21.10.1.10
Internal Use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), revert(2)  

pcatplaceholder1 1.3.6.1.4.1.251.1.1.21.10.1.11
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

pcatplaceholder2 1.3.6.1.4.1.251.1.1.21.10.1.12
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

pcconoffline 1.3.6.1.4.1.251.1.1.21.10.1.13
Put NTM LIM on or offline
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offline(1), online(2)  

sCATcontrolTable 1.3.6.1.4.1.251.1.1.21.11
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATcontrolEntry

sCATcontrolEntry 1.3.6.1.4.1.251.1.1.21.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATcontrolEntry  

sccIndex 1.3.6.1.4.1.251.1.1.21.11.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sccatlimtype 1.3.6.1.4.1.251.1.1.21.11.1.2
Type of NTM LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), t1(2), e1(3)  

sccatsendcode 1.3.6.1.4.1.251.1.1.21.11.1.3
Download code to NTM LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sccatactivate 1.3.6.1.4.1.251.1.1.21.11.1.4
Activate NTM Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sccatsendconfig 1.3.6.1.4.1.251.1.1.21.11.1.5
Download Configuration to NTM LIM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sccatbytestransferred 1.3.6.1.4.1.251.1.1.21.11.1.6
Code bytes transferred to NTM LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sccatfilexferstat 1.3.6.1.4.1.251.1.1.21.11.1.7
File transfer status as reported by Slot 0
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7)  

scatcommand 1.3.6.1.4.1.251.1.1.21.11.1.8
Internal Use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), revert(2)  

scatplaceholder1 1.3.6.1.4.1.251.1.1.21.11.1.9
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

scatplaceholder2 1.3.6.1.4.1.251.1.1.21.11.1.10
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

scconoffline 1.3.6.1.4.1.251.1.1.21.11.1.11
Put NTM LIM on or offline
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offline(1), online(2)  

pCATstatusTable 1.3.6.1.4.1.251.1.1.21.12
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATstatusEntry

pCATstatusEntry 1.3.6.1.4.1.251.1.1.21.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATstatusEntry  

pscIndex 1.3.6.1.4.1.251.1.1.21.12.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pscatlimtype 1.3.6.1.4.1.251.1.1.21.12.1.2
Type of NTM LIM detected
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), t1(2), e1(3)  

psCATFFrevision 1.3.6.1.4.1.251.1.1.21.12.1.3
NTM LIM Code Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

psCATBootrevision 1.3.6.1.4.1.251.1.1.21.12.1.4
NTM LIM Boot Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

pscatfilestatus 1.3.6.1.4.1.251.1.1.21.12.1.5
Flash file status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1), not-present(2), present(3)  

psCATfilerevision 1.3.6.1.4.1.251.1.1.21.12.1.6
NTM LIM file Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

psCATHWrevision 1.3.6.1.4.1.251.1.1.21.12.1.7
NTM LIM Hardware Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pscatmode 1.3.6.1.4.1.251.1.1.21.12.1.8
Operating Mode of NTM LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-card(3), boot(1), full-feature-offline(2), unknown(4), full-feature-in-dnld(5), boot-in-dnld(6), full-feature-online(7)  

pscaterrorcode 1.3.6.1.4.1.251.1.1.21.12.1.9
NTM LIM Error Code
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), bad-config(3), no-code(4), no-config(5), download-ok(6), download-fail(7)  

pscatplaceholder1 1.3.6.1.4.1.251.1.1.21.12.1.10
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

pscatplaceholder2 1.3.6.1.4.1.251.1.1.21.12.1.11
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

sCATstatusTable 1.3.6.1.4.1.251.1.1.21.13
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATstatusEntry

sCATstatusEntry 1.3.6.1.4.1.251.1.1.21.13.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATstatusEntry  

sscIndex 1.3.6.1.4.1.251.1.1.21.13.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sscatlimtype 1.3.6.1.4.1.251.1.1.21.13.1.2
Type of NTM LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), t1(2), e1(3)  

ssCATFFrevision 1.3.6.1.4.1.251.1.1.21.13.1.3
NTM LIM Code Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ssCATBootrevision 1.3.6.1.4.1.251.1.1.21.13.1.4
NTM LIM Boot Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sscatfilestatus 1.3.6.1.4.1.251.1.1.21.13.1.5
Flash file status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1), not-present(2), present(3)  

ssCATfilerevision 1.3.6.1.4.1.251.1.1.21.13.1.6
NTM LIM file Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ssCATHWrevision 1.3.6.1.4.1.251.1.1.21.13.1.7
NTM LIM Hardware Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sscatmode 1.3.6.1.4.1.251.1.1.21.13.1.8
Operating mode of NTM LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-card(3), boot(1), full-feature-offline(2), unknown(4), full-feature-in-dnld(5), boot-in-dnld(6), full-feature-online(7)  

sscaterrorcode 1.3.6.1.4.1.251.1.1.21.13.1.9
NTM LIM Error Code
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), no-cat(2), bad-config(3), no-code(4), no-config(5), download-ok(6), download-fail(7)  

sscatplaceholder1 1.3.6.1.4.1.251.1.1.21.13.1.10
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

sscatplaceholder2 1.3.6.1.4.1.251.1.1.21.13.1.11
Placeholder for future MIB changes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER na(1)  

pCATStratum3ConfigTable 1.3.6.1.4.1.251.1.1.21.14
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATStratum3ConfigEntry

pCATStratum3ConfigEntry 1.3.6.1.4.1.251.1.1.21.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATStratum3ConfigEntry  

ps3cIndex 1.3.6.1.4.1.251.1.1.21.14.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcatstr3listener 1.3.6.1.4.1.251.1.1.21.14.1.2
Configures Stratum 3 Reference
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external(1), line(2)  

pcatstr3oscillator 1.3.6.1.4.1.251.1.1.21.14.1.3
Configures Stratum 3 Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external-or-line(1), internal(2)  

pcatstr3forcesecondary 1.3.6.1.4.1.251.1.1.21.14.1.4
Disables Stratum 3 Driver on Primary NTM LIM only
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pcatstr3reconfigure 1.3.6.1.4.1.251.1.1.21.14.1.5
Re-configure Primary Stratum 3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sCATStratum3ConfigTable 1.3.6.1.4.1.251.1.1.21.15
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATStratum3ConfigEntry

sCATStratum3ConfigEntry 1.3.6.1.4.1.251.1.1.21.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATStratum3ConfigEntry  

ss3cIndex 1.3.6.1.4.1.251.1.1.21.15.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

scatstr3listener 1.3.6.1.4.1.251.1.1.21.15.1.2
Configures Stratum 3 Reference
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external(1), line(2)  

scatstr3oscillator 1.3.6.1.4.1.251.1.1.21.15.1.3
Configures Stratum 3 Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external-or-line(1), internal(2)  

scatstr3reconfigure 1.3.6.1.4.1.251.1.1.21.15.1.4
Re-configure Secondary Stratum 3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pCATStratum3StatusTable 1.3.6.1.4.1.251.1.1.21.16
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATStratum3StatusEntry

pCATStratum3StatusEntry 1.3.6.1.4.1.251.1.1.21.16.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATStratum3StatusEntry  

ps3sIndex 1.3.6.1.4.1.251.1.1.21.16.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcatstr3listenerstatus 1.3.6.1.4.1.251.1.1.21.16.1.2
What the Stratum 3 is referencing to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER listening-to-Primary(1), listening-to-Secondary(2), no-input(3)  

pcatstr3driverstatus 1.3.6.1.4.1.251.1.1.21.16.1.3
What the Stratum 3 output is driving
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled-online(1), disabled-offline(2), fault(3)  

pcatstr3oscstatus 1.3.6.1.4.1.251.1.1.21.16.1.4
Stratum 3 oscillator status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), acquisition-wide-band(2), locked-in-range(3), acquisition-narrow-band(4), holdover(5), internal(6)  

sCATStratum3StatusTable 1.3.6.1.4.1.251.1.1.21.17
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATStratum3StatusEntry

sCATStratum3StatusEntry 1.3.6.1.4.1.251.1.1.21.17.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATStratum3StatusEntry  

ss3sIndex 1.3.6.1.4.1.251.1.1.21.17.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

scatstr3listenerstatus 1.3.6.1.4.1.251.1.1.21.17.1.2
What the Stratum 3 Listener is referencing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER listening-to-Primary(1), listening-to-secondary(2), no-input(3)  

scatstr3driverstatus 1.3.6.1.4.1.251.1.1.21.17.1.3
What the Stratum 3 output is driving
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled-online(1), disabled-offline(2), fault(3)  

scatstr3oscstatus 1.3.6.1.4.1.251.1.1.21.17.1.4
Stratum 3 oscillator status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), acquisition-wide-band(2), locked-in-range(3), acquisition-narrow-band(4), holdover(5), internal(6)  

pCATBitsConfigTable 1.3.6.1.4.1.251.1.1.21.18
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATBitsConfigEntry

pCATBitsConfigEntry 1.3.6.1.4.1.251.1.1.21.18.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATBitsConfigEntry  

pbcIndex 1.3.6.1.4.1.251.1.1.21.18.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pbcds1V2TxLineLn 1.3.6.1.4.1.251.1.1.21.18.1.2
Select transmit line length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8)  

pbcplaceholder1 1.3.6.1.4.1.251.1.1.21.18.1.3
Future Use
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(1)  

pbcV2FRMRMode 1.3.6.1.4.1.251.1.1.21.18.1.4
DS1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), esf(3)  

pbcds1V2Coding 1.3.6.1.4.1.251.1.1.21.18.1.5
T1 Line Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(3), ami(2), b8zs-t1(1)  

pbcV2Lb 1.3.6.1.4.1.251.1.1.21.18.1.6
Loopback Selection DS1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line-loopback(2), local-loopback(3)  

pbcclrperf 1.3.6.1.4.1.251.1.1.21.18.1.7
Clear the Performance Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pbcreconfigure 1.3.6.1.4.1.251.1.1.21.18.1.9
Re-configure Primary External
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sCATBitsConfigTable 1.3.6.1.4.1.251.1.1.21.19
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATBitsConfigEntry

sCATBitsConfigEntry 1.3.6.1.4.1.251.1.1.21.19.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATBitsConfigEntry  

sbcIndex 1.3.6.1.4.1.251.1.1.21.19.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sbcds1V2TxLineLn 1.3.6.1.4.1.251.1.1.21.19.1.2
Select transmit line length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8)  

sbcplaceholder1 1.3.6.1.4.1.251.1.1.21.19.1.3
Future Use
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(1)  

sbcV2FRMRMode 1.3.6.1.4.1.251.1.1.21.19.1.4
DS1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), esf(3)  

sbcds1V2Coding 1.3.6.1.4.1.251.1.1.21.19.1.5
T1 Line Coding
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(3), ami(2), b8zs(1)  

sbcV2Lb 1.3.6.1.4.1.251.1.1.21.19.1.6
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line-loopback(2), local-loopback(3)  

sbcclrperf 1.3.6.1.4.1.251.1.1.21.19.1.7
Clear the Performance Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sbcreconfigure 1.3.6.1.4.1.251.1.1.21.19.1.8
Re-configure Secondary External
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pCATBitsStatusTable 1.3.6.1.4.1.251.1.1.21.20
Ds1/E1 Bits Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATBitsStatusEntry

pCATBitsStatusEntry 1.3.6.1.4.1.251.1.1.21.20.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATBitsStatusEntry  

pbsIndex 1.3.6.1.4.1.251.1.1.21.20.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pbslineok 1.3.6.1.4.1.251.1.1.21.20.1.2
Is the line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pbsV2RxAIS 1.3.6.1.4.1.251.1.1.21.20.1.3
Receive DS1 AIS(Blue)Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pbsV2RxLOS 1.3.6.1.4.1.251.1.1.21.20.1.4
Receive DS1 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pbsV2RxOOF 1.3.6.1.4.1.251.1.1.21.20.1.5
Receive DS1 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pbsV2RxBER 1.3.6.1.4.1.251.1.1.21.20.1.6
Receive DS1 BER status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pbsV2RxOOFCnt 1.3.6.1.4.1.251.1.1.21.20.1.7
Receive DS1 OOF count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pbsV2RxBERCnt 1.3.6.1.4.1.251.1.1.21.20.1.8
Receive DS1 BEE count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pbsV2RxLOSCnt 1.3.6.1.4.1.251.1.1.21.20.1.9
Receive DS1 LOS count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pbsV2LCVCnt 1.3.6.1.4.1.251.1.1.21.20.1.10
Receive DS1 LCV count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sCATBitsStatusTable 1.3.6.1.4.1.251.1.1.21.21
Ds1/E1 Bits Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATBitsStatusEntry

sCATBitsStatusEntry 1.3.6.1.4.1.251.1.1.21.21.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATBitsStatusEntry  

sbsIndex 1.3.6.1.4.1.251.1.1.21.21.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sbslineok 1.3.6.1.4.1.251.1.1.21.21.1.2
Is the line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sbsV2RxAIS 1.3.6.1.4.1.251.1.1.21.21.1.3
Receive DS1 AIS(Blue)Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sbsV2RxLOS 1.3.6.1.4.1.251.1.1.21.21.1.4
Receive DS1 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sbsV2RxOOF 1.3.6.1.4.1.251.1.1.21.21.1.5
Receive DS1 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sbsV2RxBER 1.3.6.1.4.1.251.1.1.21.21.1.6
Receive DS1 BER status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sbsV2RxOOFCnt 1.3.6.1.4.1.251.1.1.21.21.1.7
Receive DS1 OOF Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sbsV2RxBERCnt 1.3.6.1.4.1.251.1.1.21.21.1.8
Receive DS1 BEE Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sbsV2RxLOSCnt 1.3.6.1.4.1.251.1.1.21.21.1.9
Receive DS1/E1 LOS Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sbsV2LCVCnt 1.3.6.1.4.1.251.1.1.21.21.1.10
Receive DS1 AIS Counts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pCATDerConfigTable 1.3.6.1.4.1.251.1.1.21.22
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATDerConfigEntry

pCATDerConfigEntry 1.3.6.1.4.1.251.1.1.21.22.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATDerConfigEntry  

pdcIndex 1.3.6.1.4.1.251.1.1.21.22.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdcds1V2TxLineLn 1.3.6.1.4.1.251.1.1.21.22.1.2
Select transmit line length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8)  

pdcplaceholder1 1.3.6.1.4.1.251.1.1.21.22.1.3
Future Use
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(1)  

pdcV2FRMRMode 1.3.6.1.4.1.251.1.1.21.22.1.4
DS1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), esf(3)  

pdcds1V2Coding 1.3.6.1.4.1.251.1.1.21.22.1.5
Line Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(3), ami(2), b8zs(1)  

pdcV2Lb 1.3.6.1.4.1.251.1.1.21.22.1.6
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line-lpbk(2), local-loopback(3)  

pdcclrperf 1.3.6.1.4.1.251.1.1.21.22.1.7
Clear the performance counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pdcreconfigure 1.3.6.1.4.1.251.1.1.21.22.1.8
Re-configure Primary Line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sCATDerConfigTable 1.3.6.1.4.1.251.1.1.21.23
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATDerConfigEntry

sCATDerConfigEntry 1.3.6.1.4.1.251.1.1.21.23.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATDerConfigEntry  

sdcIndex 1.3.6.1.4.1.251.1.1.21.23.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sdcds1V2TxLineLn 1.3.6.1.4.1.251.1.1.21.23.1.2
Select transmit line length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-ft(7), na(8)  

sdcplaceholder1 1.3.6.1.4.1.251.1.1.21.23.1.3
Future Use
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(1)  

sdcV2FRMRMode 1.3.6.1.4.1.251.1.1.21.23.1.4
DS1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), esf(3)  

sdcds1V2Coding 1.3.6.1.4.1.251.1.1.21.23.1.5
Line Coding
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER na(3), ami(2), b8zs(1)  

sdcV2Lb 1.3.6.1.4.1.251.1.1.21.23.1.6
Loopback Selection DS1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line-lpbk(2), local-loopback(3)  

sdcclrperf 1.3.6.1.4.1.251.1.1.21.23.1.7
Clear the Performance Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

sdcreconfigure 1.3.6.1.4.1.251.1.1.21.23.1.8
Re-configure Secondary Line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pCATDerStatusTable 1.3.6.1.4.1.251.1.1.21.24
Ds1/E1 Derived Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PCATDerStatusEntry

pCATDerStatusEntry 1.3.6.1.4.1.251.1.1.21.24.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PCATDerStatusEntry  

pdsIndex 1.3.6.1.4.1.251.1.1.21.24.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdslineok 1.3.6.1.4.1.251.1.1.21.24.1.2
Is the line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pdsV2TxReference 1.3.6.1.4.1.251.1.1.21.24.1.3
Transmit Reference Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-input(1), primary-valid(2), secondary-valid(3)  

pdsV2RxAIS 1.3.6.1.4.1.251.1.1.21.24.1.4
Receive DS1 AIS(Blue)Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pdsV2RxLOS 1.3.6.1.4.1.251.1.1.21.24.1.5
Receive DS1 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pdsV2RxOOF 1.3.6.1.4.1.251.1.1.21.24.1.6
Receive DS1 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pdsV2RxBER 1.3.6.1.4.1.251.1.1.21.24.1.7
Receive DS1 BER status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

pdsV2RxOOFCnt 1.3.6.1.4.1.251.1.1.21.24.1.8
Receive DS1 OOF count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdsV2RxBERCnt 1.3.6.1.4.1.251.1.1.21.24.1.9
Receive DS1 BEE count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdsV2RxLOSCnt 1.3.6.1.4.1.251.1.1.21.24.1.10
Receive DS1 LOS count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdsV2LCVCnt 1.3.6.1.4.1.251.1.1.21.24.1.11
Receive DS1 AIS count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sCATDerStatusTable 1.3.6.1.4.1.251.1.1.21.25
Ds1/E1 Derived Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCATDerStatusEntry

sCATDerStatusEntry 1.3.6.1.4.1.251.1.1.21.25.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCATDerStatusEntry  

sdsIndex 1.3.6.1.4.1.251.1.1.21.25.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sdslineok 1.3.6.1.4.1.251.1.1.21.25.1.2
Is the line OK
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sdsV2TxReference 1.3.6.1.4.1.251.1.1.21.25.1.3
Transmit Reference Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-input(1), primary-valid(2), secondary-valid(3)  

sdsV2RxAIS 1.3.6.1.4.1.251.1.1.21.25.1.4
Receive DS1 AIS(Blue)Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sdsV2RxLOS 1.3.6.1.4.1.251.1.1.21.25.1.5
Receive DS1 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sdsV2RxOOF 1.3.6.1.4.1.251.1.1.21.25.1.6
Receive DS1 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sdsV2RxBER 1.3.6.1.4.1.251.1.1.21.25.1.7
Receive DS1 BER status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), na(3)  

sdsV2RxOOFCnt 1.3.6.1.4.1.251.1.1.21.25.1.8
Receive DS1 OOF count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sdsV2RxBERCnt 1.3.6.1.4.1.251.1.1.21.25.1.9
Receive DS1 BEE count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sdsV2RxLOSCnt 1.3.6.1.4.1.251.1.1.21.25.1.10
Receive DS1 LOS count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sdsV2LCVCnt 1.3.6.1.4.1.251.1.1.21.25.1.11
Receive DS1 AIS count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysClkAlarmErr 1.3.6.1.4.1.251.1.1.21.26
Defines the error type for the current clock alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sEClinePRI-ok(2), pRIlineSEC-ok(3), pRIlineSECoffline(4), pRIoscSECoffline(5), sEClinePRIoffline(6), sECoscPRIoffline(7), pRIlineSECline(8), pRIosc(9), sECosc(10), pRIoscSECosc(11), pRIoscSECline(12), pRIlineSECosc(13), no-valid-error(14)  

traceIp 1.3.6.1.4.1.251.1.1.3.1
Toggle for IP trace flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

traceUdp 1.3.6.1.4.1.251.1.1.3.2
Toggle for UDP trace flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

traceTcp 1.3.6.1.4.1.251.1.1.3.3
Toggle for TCP trace flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

traceSnmp 1.3.6.1.4.1.251.1.1.3.4
Toggle for SNMP trace flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

traceCat 1.3.6.1.4.1.251.1.1.3.5
Toggle for CAT trace flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slipIp 1.3.6.1.4.1.251.1.1.4.1
IP address of SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slipMask 1.3.6.1.4.1.251.1.1.4.2
Mask for SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slipRemoteIp 1.3.6.1.4.1.251.1.1.4.3
IP address of remote end of SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

slipSpeed 1.3.6.1.4.1.251.1.1.4.4
Baud rate of SLIP serial line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5), baud57600(6), baud115200(7)  

vcDocTable 1.3.6.1.4.1.251.1.1.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VcDocEntry

vcDocEntry 1.3.6.1.4.1.251.1.1.8.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VcDocEntry  

vcDocLinkNo 1.3.6.1.4.1.251.1.1.8.1.1.1
This is the target link number for the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

vcDocEnable 1.3.6.1.4.1.251.1.1.8.1.1.2
Setting to yes(1) enables the VCDOC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vcDocVpi 1.3.6.1.4.1.251.1.1.8.1.1.3
VPI of the VC being used for cell transfers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

vcDocVci 1.3.6.1.4.1.251.1.1.8.1.1.4
VCI of the VC being used for cell transfers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

vcDocLinkSpeed 1.3.6.1.4.1.251.1.1.8.1.1.5
This sets the speed at which the link is to run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s32kbps(64), s64kbps(128), s128kbps(192), s256kbps(224), s512kbps(240), s1024kbps(248), s2048kbps(252)  

vcDocCLines 1.3.6.1.4.1.251.1.1.8.1.1.6
This sets how control lines should be processed. If Ignore(2) is set then the port is always online.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER process(1), ignore(2)  

vcDocFifoSize 1.3.6.1.4.1.251.1.1.8.1.1.7
This is the size of the software emulated FIFO.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..100  

vcDocLowWater 1.3.6.1.4.1.251.1.1.8.1.1.8
This is the point at which the transmit clock is switched to low frequency. This must be between 0 and FIFO Size/2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..50  

vcDocHighWater 1.3.6.1.4.1.251.1.1.8.1.1.9
This is the point at which the transmit clock is switched to high frequency. This must be between FIFO size and FIFO Size/2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..100  

vcDocTestMode 1.3.6.1.4.1.251.1.1.8.1.1.10
This is the type of self-test to perform with the VC DOC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), local-loop(2), cable-loop(3), remote-loop(4), pattern-send(5)  

vcDocTestVal 1.3.6.1.4.1.251.1.1.8.1.1.11
This is the test value to use when doing the pattern-send test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex  

vcDocPriority 1.3.6.1.4.1.251.1.1.8.1.1.12
This indicates that cells will be sent with the priority bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

vcDocSuba 1.3.6.1.4.1.251.1.1.8.1.1.13
This is the target link number for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

vcDocSaddr 1.3.6.1.4.1.251.1.1.8.1.1.14
This is the target slot number for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

vcDocClockFix 1.3.6.1.4.1.251.1.1.8.1.1.15
If yes(2) then the clock will not be varied to maintain the size of the send FIFO.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

vcStatTable 1.3.6.1.4.1.251.1.1.8.2
This is a two row table that contains status information about the VCDOC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VcStatEntry

vcStatEntry 1.3.6.1.4.1.251.1.1.8.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VcStatEntry  

vcStatPortNo 1.3.6.1.4.1.251.1.1.8.2.1.1
This is the originating port number for the PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

vcStatRxState 1.3.6.1.4.1.251.1.1.8.2.1.2
This indicates whether control lines are high at the other end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

vcStatTxState 1.3.6.1.4.1.251.1.1.8.2.1.3
This indicates whether the local control lines are high.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

vcStatFifoCount 1.3.6.1.4.1.251.1.1.8.2.1.4
This indicates the number of cells waiting in the FIFO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatOFlow 1.3.6.1.4.1.251.1.1.8.2.1.5
Number of Overflows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatUFlow 1.3.6.1.4.1.251.1.1.8.2.1.6
Number of Underflows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatReSync 1.3.6.1.4.1.251.1.1.8.2.1.7
This is the number of times a sequence number resync has been required.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatInvented 1.3.6.1.4.1.251.1.1.8.2.1.8
Number of invented cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatRxCells 1.3.6.1.4.1.251.1.1.8.2.1.9
Received cells count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcStatTxCells 1.3.6.1.4.1.251.1.1.8.2.1.10
Transmitted cells count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcStatRxSeqNo 1.3.6.1.4.1.251.1.1.8.2.1.11
Receive current sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatTxSeqNo 1.3.6.1.4.1.251.1.1.8.2.1.12
Transmit current sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatLastError 1.3.6.1.4.1.251.1.1.8.2.1.13
Last error type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatLastCompare 1.3.6.1.4.1.251.1.1.8.2.1.14
Last compare value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcStatTestErrors 1.3.6.1.4.1.251.1.1.8.2.1.15
Number of test errors detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelayStatTable 1.3.6.1.4.1.251.1.1.9.1
This contains the overall status information for the frame relay links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FRelayStatEntry

fRelayStatEntry 1.3.6.1.4.1.251.1.1.9.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FRelayStatEntry  

fRelStatLinkNo 1.3.6.1.4.1.251.1.1.9.1.1.1
Local send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

fRelStatLocSeq 1.3.6.1.4.1.251.1.1.9.1.1.2
Local send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatLocAck 1.3.6.1.4.1.251.1.1.9.1.1.3
Local ack sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatLocState 1.3.6.1.4.1.251.1.1.9.1.1.4
Local state of link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

fRelStatLocStartT 1.3.6.1.4.1.251.1.1.9.1.1.5
Local start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatLocErrThr 1.3.6.1.4.1.251.1.1.9.1.1.6
Local error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelStatLocMec 1.3.6.1.4.1.251.1.1.9.1.1.7
Local monitored events Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelStatLocPoll 1.3.6.1.4.1.251.1.1.9.1.1.8
Local poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelStatRemSeq 1.3.6.1.4.1.251.1.1.9.1.1.9
Remote send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatRemAck 1.3.6.1.4.1.251.1.1.9.1.1.10
Remote ack sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatRemState 1.3.6.1.4.1.251.1.1.9.1.1.11
Remote state of link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

fRelStatRemStartT 1.3.6.1.4.1.251.1.1.9.1.1.12
Remote start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fRelStatRemErrThr 1.3.6.1.4.1.251.1.1.9.1.1.13
Remote error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelStatRemMec 1.3.6.1.4.1.251.1.1.9.1.1.14
Remote monitored events Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelStatRemPoll 1.3.6.1.4.1.251.1.1.9.1.1.15
Remote poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fRelayConfTable 1.3.6.1.4.1.251.1.1.9.2
This table contains the overall configuration for the frame relay links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FRelayConfEntry

fRelayConfEntry 1.3.6.1.4.1.251.1.1.9.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FRelayConfEntry  

fRelConfLinkNo 1.3.6.1.4.1.251.1.1.9.2.1.1
Number of the link to configure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

fRelConfLinkEnab 1.3.6.1.4.1.251.1.1.9.2.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

fRelConfLinkMode 1.3.6.1.4.1.251.1.1.9.2.1.3
frame mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ansi(1), lmi(2), transport(3), dxi(4)  

fRelConfLinkSpeed 1.3.6.1.4.1.251.1.1.9.2.1.4
Local speed of link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s48kbps(48), s56kbps(77), s64kbps(100), s72kbps(117), s128kbps(177), s153k6bps(191), s256kbps(217), s307k2bps(223), s614k4bps(240), s819k2bps(244), s1Mbps(246), s2Mbps(251), s3Mbps(253), s5Mbps(254), s10Mbps(255)  

fRelConfLinkCline 1.3.6.1.4.1.251.1.1.9.2.1.5
Set to no(2) to disable control line processing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

fRelConfLinkType 1.3.6.1.4.1.251.1.1.9.2.1.6
Type of link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(1), network(2), nni(3)  

fRelConfN391 1.3.6.1.4.1.251.1.1.9.2.1.7
Poll count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

fRelConfN392 1.3.6.1.4.1.251.1.1.9.2.1.8
Threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

fRelConfN393 1.3.6.1.4.1.251.1.1.9.2.1.9
Monitored events.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

fRelConfT391 1.3.6.1.4.1.251.1.1.9.2.1.10
Poll period.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

fRelConfT392 1.3.6.1.4.1.251.1.1.9.2.1.11
Poll timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

fraPStatTable 1.3.6.1.4.1.251.1.1.9.3
This shows the status of the frame relay PVCs for link 0.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FraPStatEntry

fraPStatEntry 1.3.6.1.4.1.251.1.1.9.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FraPStatEntry  

fraPStatDlci 1.3.6.1.4.1.251.1.1.9.3.1.1
This is the DLCI for the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 16..511  

fraPStatRxBCnt 1.3.6.1.4.1.251.1.1.9.3.1.2
The number of bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatTxBCnt 1.3.6.1.4.1.251.1.1.9.3.1.3
The number of bytes transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatRxFCnt 1.3.6.1.4.1.251.1.1.9.3.1.4
The number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatTxFCnt 1.3.6.1.4.1.251.1.1.9.3.1.5
The number of frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatRxBRate 1.3.6.1.4.1.251.1.1.9.3.1.6
The rate of bytes being received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

fraPStatTxBRate 1.3.6.1.4.1.251.1.1.9.3.1.7
The rate of bytes being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

fraPStatRxFRate 1.3.6.1.4.1.251.1.1.9.3.1.8
The rate of frames being received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

fraPStatTxFRate 1.3.6.1.4.1.251.1.1.9.3.1.9
The rate of frames being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

fraPStatDERxF 1.3.6.1.4.1.251.1.1.9.3.1.10
The count of discarded eligible received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatDisRxF 1.3.6.1.4.1.251.1.1.9.3.1.11
The count of discarded received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatPvcStat 1.3.6.1.4.1.251.1.1.9.3.1.12
The state of the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

fraPStatLinkState 1.3.6.1.4.1.251.1.1.9.3.1.13
The state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

fraPStatLocSeq 1.3.6.1.4.1.251.1.1.9.3.1.14
The local send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatLocAck 1.3.6.1.4.1.251.1.1.9.3.1.15
The local acknowledge number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatLocStat 1.3.6.1.4.1.251.1.1.9.3.1.16
The local state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatLocStartT 1.3.6.1.4.1.251.1.1.9.3.1.17
The local start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatLocErrThr 1.3.6.1.4.1.251.1.1.9.3.1.18
The local error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatLocMec 1.3.6.1.4.1.251.1.1.9.3.1.19
The local monitored event Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatLocPoll 1.3.6.1.4.1.251.1.1.9.3.1.20
The local poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatRemSeq 1.3.6.1.4.1.251.1.1.9.3.1.21
The remote send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatRemAck 1.3.6.1.4.1.251.1.1.9.3.1.22
The remote acknowledge number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatRemStat 1.3.6.1.4.1.251.1.1.9.3.1.23
The remote state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatRemStartT 1.3.6.1.4.1.251.1.1.9.3.1.24
The remote start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPStatRemErrThr 1.3.6.1.4.1.251.1.1.9.3.1.25
The remote error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatRemMec 1.3.6.1.4.1.251.1.1.9.3.1.26
The remote monitored event Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatRemPoll 1.3.6.1.4.1.251.1.1.9.3.1.27
The remote poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fraPStatLastChangeM2 1.3.6.1.4.1.251.1.1.9.3.1.29
The date and time of last state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

fraPConfigTable 1.3.6.1.4.1.251.1.1.9.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FraPConfigEntry

fraPConfigEntry 1.3.6.1.4.1.251.1.1.9.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FraPConfigEntry  

fraPConfigDlci 1.3.6.1.4.1.251.1.1.9.4.1.1
This is the DLCI for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..511  

fraPConfigCir 1.3.6.1.4.1.251.1.1.9.4.1.2
The committed information rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fraPConfigCommitB 1.3.6.1.4.1.251.1.1.9.4.1.3
The committed burst rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fraPConfigExcessB 1.3.6.1.4.1.251.1.1.9.4.1.4
The excess burst size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

fraVpi 1.3.6.1.4.1.251.1.1.9.4.1.5
The VPI for this call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

fraVci 1.3.6.1.4.1.251.1.1.9.4.1.6
The VCI for the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

fraPConfigPriority 1.3.6.1.4.1.251.1.1.9.4.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPConfigSuba 1.3.6.1.4.1.251.1.1.9.4.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPConfigSaddr 1.3.6.1.4.1.251.1.1.9.4.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fraPConfigValidity 1.3.6.1.4.1.251.1.1.9.4.1.10
Provides a way of deleting a row in the table when set to invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

fraPConfigDxivpi 1.3.6.1.4.1.251.1.1.9.4.1.11
This is the VPI for the PVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

fraPConfigDxivci 1.3.6.1.4.1.251.1.1.9.4.1.12
This is the VCI for the PVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

fraPConfigDximode 1.3.6.1.4.1.251.1.1.9.4.1.13
This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

frbPStatTable 1.3.6.1.4.1.251.1.1.9.5
This table shows statistics about the Frame Relay PVCs for link 1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrbPStatEntry

frbPStatEntry 1.3.6.1.4.1.251.1.1.9.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrbPStatEntry  

frbPStatDlci 1.3.6.1.4.1.251.1.1.9.5.1.1
This is the DLCI for the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 16..511  

frbPStatRxBCnt 1.3.6.1.4.1.251.1.1.9.5.1.2
The number of bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatTxBCnt 1.3.6.1.4.1.251.1.1.9.5.1.3
The number of bytes transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatRxFCnt 1.3.6.1.4.1.251.1.1.9.5.1.4
The number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatTxFCnt 1.3.6.1.4.1.251.1.1.9.5.1.5
The number of frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatRxBRate 1.3.6.1.4.1.251.1.1.9.5.1.6
The rate of bytes being received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

frbPStatTxBRate 1.3.6.1.4.1.251.1.1.9.5.1.7
The rate of bytes being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

frbPStatRxFRate 1.3.6.1.4.1.251.1.1.9.5.1.8
The rate of frames being received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

frbPStatTxFRate 1.3.6.1.4.1.251.1.1.9.5.1.9
The rate of frames being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

frbPStatDERxF 1.3.6.1.4.1.251.1.1.9.5.1.10
The count of discarded eligible received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatDisRxF 1.3.6.1.4.1.251.1.1.9.5.1.11
The count of discarded received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatPvcStat 1.3.6.1.4.1.251.1.1.9.5.1.12
The state of the PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

frbPStatLinkState 1.3.6.1.4.1.251.1.1.9.5.1.13
The state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

frbPStatLocSeq 1.3.6.1.4.1.251.1.1.9.5.1.14
The local send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatLocAck 1.3.6.1.4.1.251.1.1.9.5.1.15
The local acknowledge number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatLocStat 1.3.6.1.4.1.251.1.1.9.5.1.16
The local state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatLocStartT 1.3.6.1.4.1.251.1.1.9.5.1.17
The local start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatLocErrThr 1.3.6.1.4.1.251.1.1.9.5.1.18
The local error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatLocMec 1.3.6.1.4.1.251.1.1.9.5.1.19
The local monitored event Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatLocPoll 1.3.6.1.4.1.251.1.1.9.5.1.20
The local poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatRemSeq 1.3.6.1.4.1.251.1.1.9.5.1.21
The remote send sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatRemAck 1.3.6.1.4.1.251.1.1.9.5.1.22
The remote acknowledge number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatRemStat 1.3.6.1.4.1.251.1.1.9.5.1.23
The remote state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatRemStartT 1.3.6.1.4.1.251.1.1.9.5.1.24
The remote start time for poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPStatRemErrThr 1.3.6.1.4.1.251.1.1.9.5.1.25
The remote error threshold Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatRemMec 1.3.6.1.4.1.251.1.1.9.5.1.26
The remote monitored event Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatRemPoll 1.3.6.1.4.1.251.1.1.9.5.1.27
The remote poll Counter for DTE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

frbPStatLastChangeM2 1.3.6.1.4.1.251.1.1.9.5.1.29
The date and time of last state change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

frbPConfigTable 1.3.6.1.4.1.251.1.1.9.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrbPConfigEntry

frbPConfigEntry 1.3.6.1.4.1.251.1.1.9.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrbPConfigEntry  

frbPConfigDlci 1.3.6.1.4.1.251.1.1.9.6.1.1
This is the DLCI for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..511  

frbPConfigCir 1.3.6.1.4.1.251.1.1.9.6.1.2
The committed information rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

frbPConfigCommitB 1.3.6.1.4.1.251.1.1.9.6.1.3
The committed burst rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

frbPConfigExcessB 1.3.6.1.4.1.251.1.1.9.6.1.4
The excess burst size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

frbVpi 1.3.6.1.4.1.251.1.1.9.6.1.5
The VPI for this call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

frbVci 1.3.6.1.4.1.251.1.1.9.6.1.6
The VCI for the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

frbPConfigPriority 1.3.6.1.4.1.251.1.1.9.6.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPConfigSuba 1.3.6.1.4.1.251.1.1.9.6.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPConfigSaddr 1.3.6.1.4.1.251.1.1.9.6.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

frbPConfigValidity 1.3.6.1.4.1.251.1.1.9.6.1.10
Provides a way of deleting a row in the table when set to invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

frbPConfigDxivpi 1.3.6.1.4.1.251.1.1.9.6.1.11
This is the VPI for the PVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

frbPConfigDxivci 1.3.6.1.4.1.251.1.1.9.6.1.12
This is the VCI for the PVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

frbPConfigDximode 1.3.6.1.4.1.251.1.1.9.6.1.13
This flag indicates whether the mode is DXI - in that case the value of DLCI is ignored
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

vcaTable 1.3.6.1.4.1.251.1.1.10.3
This table shows detailed status for native ATM slot controller card link A VCs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VcaEntry

vcaEntry 1.3.6.1.4.1.251.1.1.10.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VcaEntry  

vcaVpi 1.3.6.1.4.1.251.1.1.10.3.1.1
Virtual path identifier for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

vcaVci 1.3.6.1.4.1.251.1.1.10.3.1.2
Virtual channel identifier for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vcaTxGCells 1.3.6.1.4.1.251.1.1.10.3.1.3
Number of transmitted good cells CLP0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcaTxGCellsClp1 1.3.6.1.4.1.251.1.1.10.3.1.4
Number of transmitted good cells CLP1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcaRxGCells 1.3.6.1.4.1.251.1.1.10.3.1.5
Number of received good cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcaExcessCells 1.3.6.1.4.1.251.1.1.10.3.1.6
Number of cells discarded because of bucket overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcaPeakExceeds 1.3.6.1.4.1.251.1.1.10.3.1.7
Number of cells discarded because of peak cell rate violation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcaCellHead 1.3.6.1.4.1.251.1.1.10.3.1.8
This value is bitwise OR'd with the cell header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcaCellMask 1.3.6.1.4.1.251.1.1.10.3.1.9
This value is bitwise AND'd with the cell header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcaCellSwitchHead 1.3.6.1.4.1.251.1.1.10.3.1.10
This comprises a tag which is added to the cell before putting into the cell switch and a control byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcaStartTime 1.3.6.1.4.1.251.1.1.10.3.1.11
This is the bucket start time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaBucketControl 1.3.6.1.4.1.251.1.1.10.3.1.12
This is the bucket control register value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcaBucket0CV 1.3.6.1.4.1.251.1.1.10.3.1.13
The current value of bucket 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket0Max 1.3.6.1.4.1.251.1.1.10.3.1.14
The maximum value of bucket 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket0Inc 1.3.6.1.4.1.251.1.1.10.3.1.15
The bucket 0 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaBucket1CV 1.3.6.1.4.1.251.1.1.10.3.1.16
The current value of bucket 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket1Max 1.3.6.1.4.1.251.1.1.10.3.1.17
The maximum value of bucket 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket1Inc 1.3.6.1.4.1.251.1.1.10.3.1.18
The bucket 1 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaBucket2CV 1.3.6.1.4.1.251.1.1.10.3.1.19
The current value of bucket 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket2Max 1.3.6.1.4.1.251.1.1.10.3.1.20
The maximum value of bucket 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket2Inc 1.3.6.1.4.1.251.1.1.10.3.1.21
The bucket 2 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaBucket3CV 1.3.6.1.4.1.251.1.1.10.3.1.22
The current value of bucket 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket3Max 1.3.6.1.4.1.251.1.1.10.3.1.23
The maximum value of bucket 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcaBucket3Inc 1.3.6.1.4.1.251.1.1.10.3.1.24
The bucket 3 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaType 1.3.6.1.4.1.251.1.1.10.3.1.25
Virtual channel type for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mgmt-vc(3), sr-pp-pvc(2), sr-pp-pvp(6), sr-mp-bi-pvc(10), sr-mp-bi-pvp(14), sr-mp-uni-pvc(26), sr-mp-uni-pvp(30), sr-pp-svc(1), sr-pp-svp(5), sr-mp-bi-svc(9), sr-mp-bi-svp(13), sr-mp-uni-svc(25), sr-mp-uni-svp(29), ds-pp-pvc(34), ds-pp-pvp(38), ds-mp-bi-pvc(42), ds-mp-bi-pvp(46), ds-mp-uni-pvc(58), ds-mp-uni-pvp(62), ds-pp-svc(33), ds-pp-svp(37), ds-mp-bi-svc(41), ds-mp-bi-svp(45), ds-mp-uni-svc(57), ds-mp-uni-svp(61)  

vcaDstSlot 1.3.6.1.4.1.251.1.1.10.3.1.26
slot # this VC is going to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


vcaDstVpi 1.3.6.1.4.1.251.1.1.10.3.1.28
VPI this VC is destined for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaDstVci 1.3.6.1.4.1.251.1.1.10.3.1.29
VCI for this VC is destined for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaInternalVpi 1.3.6.1.4.1.251.1.1.10.3.1.30
Internal VPI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcaInternalVci 1.3.6.1.4.1.251.1.1.10.3.1.31
Internal VCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbTable 1.3.6.1.4.1.251.1.1.10.4
This table shows detailed status for native ATM slot controller card link B VCs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VcbEntry

vcbEntry 1.3.6.1.4.1.251.1.1.10.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VcbEntry  

vcbVpi 1.3.6.1.4.1.251.1.1.10.4.1.1
Virtual path identifier for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

vcbVci 1.3.6.1.4.1.251.1.1.10.4.1.2
Virtual channel identifier for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vcbTxGCells 1.3.6.1.4.1.251.1.1.10.4.1.3
Number of transmitted good cells CLP0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcbTxGCellsClp1 1.3.6.1.4.1.251.1.1.10.4.1.4
Number of transmitted good cells CLP1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcbRxGCells 1.3.6.1.4.1.251.1.1.10.4.1.5
Number of received good cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcbExcessCells 1.3.6.1.4.1.251.1.1.10.4.1.6
Number of cells discarded because of bucket overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcbPeakExceeds 1.3.6.1.4.1.251.1.1.10.4.1.7
Number of cells discarded because of peak cell rate violation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vcbCellHead 1.3.6.1.4.1.251.1.1.10.4.1.8
This value is bitwise OR'd with the cell header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcbCellMask 1.3.6.1.4.1.251.1.1.10.4.1.9
This value is bitwise AND'd with the cell header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcbCellSwitchHead 1.3.6.1.4.1.251.1.1.10.4.1.10
This comprises a tag which is added to the cell before putting into the cell switch and a control byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcbStartTime 1.3.6.1.4.1.251.1.1.10.4.1.11
This is the bucket start time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbBucketControl 1.3.6.1.4.1.251.1.1.10.4.1.12
This is the bucket control register value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex  

vcbBucket0CV 1.3.6.1.4.1.251.1.1.10.4.1.13
The current value of bucket 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket0Max 1.3.6.1.4.1.251.1.1.10.4.1.14
The maximum value of bucket 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket0Inc 1.3.6.1.4.1.251.1.1.10.4.1.15
The bucket 0 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbBucket1CV 1.3.6.1.4.1.251.1.1.10.4.1.16
The current value of bucket 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket1Max 1.3.6.1.4.1.251.1.1.10.4.1.17
The maximum value of bucket 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket1Inc 1.3.6.1.4.1.251.1.1.10.4.1.18
The bucket 1 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbBucket2CV 1.3.6.1.4.1.251.1.1.10.4.1.19
The current value of bucket 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket2Max 1.3.6.1.4.1.251.1.1.10.4.1.20
The maximum value of bucket 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket2Inc 1.3.6.1.4.1.251.1.1.10.4.1.21
The bucket 2 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbBucket3CV 1.3.6.1.4.1.251.1.1.10.4.1.22
The current value of bucket 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket3Max 1.3.6.1.4.1.251.1.1.10.4.1.23
The maximum value of bucket 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

vcbBucket3Inc 1.3.6.1.4.1.251.1.1.10.4.1.24
The bucket 3 increment value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbType 1.3.6.1.4.1.251.1.1.10.4.1.25
Virtual channel type for the VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mgmt-vc(3), sr-pp-pvc(2), sr-pp-pvp(6), sr-mp-bi-pvc(10), sr-mp-bi-pvp(14), sr-mp-uni-pvc(26), sr-mp-uni-pvp(30), sr-pp-svc(1), sr-pp-svp(5), sr-mp-bi-svc(9), sr-mp-bi-svp(13), sr-mp-uni-svc(25), sr-mp-uni-svp(29), ds-pp-pvc(34), ds-pp-pvp(38), ds-mp-bi-pvc(42), ds-mp-bi-pvp(46), ds-mp-uni-pvc(58), ds-mp-uni-pvp(62), ds-pp-svc(33), ds-pp-svp(37), ds-mp-bi-svc(41), ds-mp-bi-svp(45), ds-mp-uni-svc(57), ds-mp-uni-svp(61)  

vcbDstSlot 1.3.6.1.4.1.251.1.1.10.4.1.26
slot # this VC is going to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


vcbDstVpi 1.3.6.1.4.1.251.1.1.10.4.1.28
VPI this VC is destined for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbDstVci 1.3.6.1.4.1.251.1.1.10.4.1.29
VCI for this VC is destined for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbInternalVpi 1.3.6.1.4.1.251.1.1.10.4.1.30
Internal VPI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vcbInternalVci 1.3.6.1.4.1.251.1.1.10.4.1.31
Internal VCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xpStatTable 1.3.6.1.4.1.251.1.1.10.5
This table shows status of the switch fabric interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XpStatEntry

xpStatEntry 1.3.6.1.4.1.251.1.1.10.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XpStatEntry  

xpIFace 1.3.6.1.4.1.251.1.1.10.5.1.1
Switch fabric interface number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

xpRXCells 1.3.6.1.4.1.251.1.1.10.5.1.2
Switch fabric received cell count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpTXCells 1.3.6.1.4.1.251.1.1.10.5.1.3
Switch fabric transmit cell count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpBadVpiVci 1.3.6.1.4.1.251.1.1.10.5.1.4
Number of cells with bad VCI/VPI received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpRxOverflow 1.3.6.1.4.1.251.1.1.10.5.1.5
Number of receiver overflows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpTxHighPrOver 1.3.6.1.4.1.251.1.1.10.5.1.6
Number of transmitted cells with high priority overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpTxLowPrOver 1.3.6.1.4.1.251.1.1.10.5.1.7
Number of transmitted cells with low priority overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpInputOverflow 1.3.6.1.4.1.251.1.1.10.5.1.8
Number of M68302 fabric input overflow cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpDocErrors 1.3.6.1.4.1.251.1.1.10.5.1.9
Number of DOC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpLowPriorityFifo 1.3.6.1.4.1.251.1.1.10.5.1.10
Read transmit low priority FIFO count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpEgDiscCells 1.3.6.1.4.1.251.1.1.10.5.1.11
Read transmit discard cell count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xpIgDiscCells 1.3.6.1.4.1.251.1.1.10.5.1.12
Read receive discard cell count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPTable 1.3.6.1.4.1.251.1.1.35.1
This table is used for PLCP configuration and status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PdhPLCPEntry

pdhPLCPEntry 1.3.6.1.4.1.251.1.1.35.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PdhPLCPEntry  

pdhPLCPLinkNo 1.3.6.1.4.1.251.1.1.35.1.1.1
Link Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

pdhPLCPLinkEnable 1.3.6.1.4.1.251.1.1.35.1.1.2
Enable/Disable Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pdhPLCPLinkStatusAffect 1.3.6.1.4.1.251.1.1.35.1.1.3
Link Status affect on receiving/transmitting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignored(2), processed(1)  

pdhPLCPLinkState 1.3.6.1.4.1.251.1.1.35.1.1.4
Current Link State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

pdhPLCPPhyMode 1.3.6.1.4.1.251.1.1.35.1.1.5
The physical framing for link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), ds3(2), e3(3)  

pdhPLCPMode 1.3.6.1.4.1.251.1.1.35.1.1.6
The PLCP mode for link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hec-based-delineation(1), ds1-PLCP(2), ds3-PLCP(3), e1-PLCP(4), e3-g751-PLCP(5)  

pdhPLCPScrambler 1.3.6.1.4.1.251.1.1.35.1.1.7
Enable/Disable scrambling
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pdhPLCP0x55 1.3.6.1.4.1.251.1.1.35.1.1.8
Enable/Disable XORing HCS with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pdhPLCPSmdsMode 1.3.6.1.4.1.251.1.1.35.1.1.9
Enable/Disable SMDS mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(2), enabled(1)  

pdhPLCPIdleCell 1.3.6.1.4.1.251.1.1.35.1.1.10
Idle Cell Header Contents
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unassigned(1), idle(2)  

pdhPLCPLoopback 1.3.6.1.4.1.251.1.1.35.1.1.11
PLCP Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), diagnostic-lpbk(2), line-lpbk(3), payload-lpbk(4), cell-lpbk(5)  

pdhPLCPClear 1.3.6.1.4.1.251.1.1.35.1.1.12
Clear PLCP counts
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPReconfig 1.3.6.1.4.1.251.1.1.35.1.1.13
Reconfigure link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPLpbkTimeout 1.3.6.1.4.1.251.1.1.35.1.1.14
This parameter is used to set the loopback timeout in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..604800  

pdhPLCPChipType 1.3.6.1.4.1.251.1.1.35.1.1.32
PDH Chip Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER plpp(1), suni-pdh(2), unknown(3)  

pdhPLCPTXclock 1.3.6.1.4.1.251.1.1.35.1.1.33
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

pdhPLCPRXclock 1.3.6.1.4.1.251.1.1.35.1.1.34
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

pdhPLCPTXCells 1.3.6.1.4.1.251.1.1.35.1.1.35
The transmit cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPRXCells 1.3.6.1.4.1.251.1.1.35.1.1.36
The receive cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPHCSErrs 1.3.6.1.4.1.251.1.1.35.1.1.37
The header checksum error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPLOCDDefect 1.3.6.1.4.1.251.1.1.35.1.1.43
Loss of cell delineation Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPYellowDefect 1.3.6.1.4.1.251.1.1.35.1.1.44
PLCP Yellow Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPLOFDefect 1.3.6.1.4.1.251.1.1.35.1.1.45
PLCP Loss Of Frame Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPLOCDAlarm 1.3.6.1.4.1.251.1.1.35.1.1.49
Loss of cell delineation Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPYellowAlarm 1.3.6.1.4.1.251.1.1.35.1.1.50
PLCP Yellow Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPLOFAlarm 1.3.6.1.4.1.251.1.1.35.1.1.51
PLCP Loss Of Frame Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhPLCPFrameErrs 1.3.6.1.4.1.251.1.1.35.1.1.56
Number of PLCP frame errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPBIP8Errs 1.3.6.1.4.1.251.1.1.35.1.1.57
Number of PLCP BIP-8 errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPFEBEErrs 1.3.6.1.4.1.251.1.1.35.1.1.58
Number of PLCP FEBE errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPES 1.3.6.1.4.1.251.1.1.35.1.1.63
PLCP Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPSES 1.3.6.1.4.1.251.1.1.35.1.1.64
PLCP Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPUAS 1.3.6.1.4.1.251.1.1.35.1.1.65
PLCP Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPFEES 1.3.6.1.4.1.251.1.1.35.1.1.66
PLCP Far End Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPFESES 1.3.6.1.4.1.251.1.1.35.1.1.67
PLCP Far End Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhPLCPFEUAS 1.3.6.1.4.1.251.1.1.35.1.1.68
PLCP Far End Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3Table 1.3.6.1.4.1.251.1.1.35.2
This table is used for DS3 config/status supplied by the PLPP chip
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PdhDS3Entry

pdhDS3Entry 1.3.6.1.4.1.251.1.1.35.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PdhDS3Entry  

pdhDS3TableValid 1.3.6.1.4.1.251.1.1.35.2.1.1
Indicates if table is valid for configured LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3LinkNo 1.3.6.1.4.1.251.1.1.35.2.1.2
Link Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

pdhDS3Framer 1.3.6.1.4.1.251.1.1.35.2.1.3
DS3 framer mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER c-bit(1), m23(2)  

pdhDS3TxAIS 1.3.6.1.4.1.251.1.1.35.2.1.4
Transmit AIS
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3Clear 1.3.6.1.4.1.251.1.1.35.2.1.5
Clear Button for Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

pdhDS3Reconfig 1.3.6.1.4.1.251.1.1.35.2.1.6
Reconfigure link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3RxFrmFmt 1.3.6.1.4.1.251.1.1.35.2.1.26
Receive framing format
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER c-bit(1), clear-channel(2)  

pdhDS3RxIDL 1.3.6.1.4.1.251.1.1.35.2.1.27
Receive IDLE status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3FEACTxmt 1.3.6.1.4.1.251.1.1.35.2.1.28
Code that has been transmitted as a FEAC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(7), line-loopback-active(6), line-loopback-deactive(5), ds3-idl(4), ds3-ais(3), ds3-oof(2), ds3-los(1)  

pdhDS3Lcvs 1.3.6.1.4.1.251.1.1.35.2.1.33
DS3 Line Code Violation count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3FrameErrs 1.3.6.1.4.1.251.1.1.35.2.1.34
DS3 frame error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3ParityErrs 1.3.6.1.4.1.251.1.1.35.2.1.35
DS3 parity error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3CbitPrtyErrs 1.3.6.1.4.1.251.1.1.35.2.1.36
DS3 C-bit parity error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3FEBEErrs 1.3.6.1.4.1.251.1.1.35.2.1.37
DS3 FEBE error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3LOSDefect 1.3.6.1.4.1.251.1.1.35.2.1.43
DS3 Loss of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3OOFDefect 1.3.6.1.4.1.251.1.1.35.2.1.44
DS3 Out of Frame Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3AISDefect 1.3.6.1.4.1.251.1.1.35.2.1.45
Receive DS3 AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3YellowDefect 1.3.6.1.4.1.251.1.1.35.2.1.46
DS3 Yellow Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3ExBERDefect 1.3.6.1.4.1.251.1.1.35.2.1.47
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3LOSAlarm 1.3.6.1.4.1.251.1.1.35.2.1.53
DS3 Loss of Signal Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3LOFAlarm 1.3.6.1.4.1.251.1.1.35.2.1.54
DS3 Loss of Frame Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3AISAlarm 1.3.6.1.4.1.251.1.1.35.2.1.55
Receive DS3 AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3YellowAlarm 1.3.6.1.4.1.251.1.1.35.2.1.56
DS3 Yellow Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3ExBERAlarm 1.3.6.1.4.1.251.1.1.35.2.1.57
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhDS3LES 1.3.6.1.4.1.251.1.1.35.2.1.63
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3LSES 1.3.6.1.4.1.251.1.1.35.2.1.64
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3ES 1.3.6.1.4.1.251.1.1.35.2.1.65
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3ES2 1.3.6.1.4.1.251.1.1.35.2.1.66
Secondary Errored Seconds (C-bit mode only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3SES 1.3.6.1.4.1.251.1.1.35.2.1.67
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3SES2 1.3.6.1.4.1.251.1.1.35.2.1.68
Secondary Severely Errored Seconds (C-bit mode only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3AISS 1.3.6.1.4.1.251.1.1.35.2.1.69
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3UAS 1.3.6.1.4.1.251.1.1.35.2.1.70
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3FarEndES 1.3.6.1.4.1.251.1.1.35.2.1.71
Far End Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3FarEndSES 1.3.6.1.4.1.251.1.1.35.2.1.72
Far End Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhDS3FarEndUAS 1.3.6.1.4.1.251.1.1.35.2.1.73
Far End Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3Table 1.3.6.1.4.1.251.1.1.35.3
This table is used for E3 config/status supplied by the PLPP chip
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PdhE3Entry

pdhE3Entry 1.3.6.1.4.1.251.1.1.35.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PdhE3Entry  

pdhE3TableValid 1.3.6.1.4.1.251.1.1.35.3.1.1
Indicates if table is valid for configured LIM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3LinkNo 1.3.6.1.4.1.251.1.1.35.3.1.2
Link Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

pdhE3Framer 1.3.6.1.4.1.251.1.1.35.3.1.3
E3 framer mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g832(2), g751(1)  

pdhE3Clear 1.3.6.1.4.1.251.1.1.35.3.1.4
Clear Button for Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

pdhE3Reconfig 1.3.6.1.4.1.251.1.1.35.3.1.5
Reconfigure link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3TxmtTimMk 1.3.6.1.4.1.251.1.1.35.3.1.6
Set to yes(1) if traceable to primary ref clk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

pdhE3PloadTypeLab 1.3.6.1.4.1.251.1.1.35.3.1.7
Payload type label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atm(2)  

pdhE3TxTrlTrcIdLen 1.3.6.1.4.1.251.1.1.35.3.1.8
Trail trace length for transmit and expected receive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER length-16(16)  

pdhE3TxTrcIdUH 1.3.6.1.4.1.251.1.1.35.3.1.9
Transmit trail trace ID upper half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

pdhE3TxTrcIdLH 1.3.6.1.4.1.251.1.1.35.3.1.10
Transmit trail trace ID lower half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

pdhE3RxExTrcIdUH 1.3.6.1.4.1.251.1.1.35.3.1.11
Receive expected trail trace ID upper half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

pdhE3RxExTrcIdLH 1.3.6.1.4.1.251.1.1.35.3.1.12
Receive expected trail trace ID lower half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

pdhE3FrameErrs 1.3.6.1.4.1.251.1.1.35.3.1.32
E3 frame error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3Lcvs 1.3.6.1.4.1.251.1.1.35.3.1.33
E3 Line Code Violation count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3ParityErrs 1.3.6.1.4.1.251.1.1.35.3.1.34
E3-G832 parity error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3FEBEErrs 1.3.6.1.4.1.251.1.1.35.3.1.35
E3-G832 FEBE error count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3LOSDefect 1.3.6.1.4.1.251.1.1.35.3.1.41
LOS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3OOFDefect 1.3.6.1.4.1.251.1.1.35.3.1.42
LOF Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3AISDefect 1.3.6.1.4.1.251.1.1.35.3.1.43
AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3FERFDefect 1.3.6.1.4.1.251.1.1.35.3.1.44
FERF Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3ExBERDefect 1.3.6.1.4.1.251.1.1.35.3.1.45
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3LOSAlarm 1.3.6.1.4.1.251.1.1.35.3.1.51
LOS Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3LOFAlarm 1.3.6.1.4.1.251.1.1.35.3.1.52
LOF Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3AISAlarm 1.3.6.1.4.1.251.1.1.35.3.1.53
AIS Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3FERFAlarm 1.3.6.1.4.1.251.1.1.35.3.1.54
FERF Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3ExBERAlarm 1.3.6.1.4.1.251.1.1.35.3.1.55
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3LES 1.3.6.1.4.1.251.1.1.35.3.1.61
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3LSES 1.3.6.1.4.1.251.1.1.35.3.1.62
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3ES 1.3.6.1.4.1.251.1.1.35.3.1.63
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3SES 1.3.6.1.4.1.251.1.1.35.3.1.64
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3AISS 1.3.6.1.4.1.251.1.1.35.3.1.65
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3UAS 1.3.6.1.4.1.251.1.1.35.3.1.66
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pdhE3RxTrlTrc 1.3.6.1.4.1.251.1.1.35.3.1.76
Last received trail trace message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(16)  

pdhE3RxTrIdMis 1.3.6.1.4.1.251.1.1.35.3.1.77
Receive trace id mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3RxTrIdUnst 1.3.6.1.4.1.251.1.1.35.3.1.78
Receive trace id unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3RxPloadTypeLabMis 1.3.6.1.4.1.251.1.1.35.3.1.79
Receive payload type label mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

pdhE3RxPloadTypeLabUnst 1.3.6.1.4.1.251.1.1.35.3.1.80
Receive payload type label unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppCTable 1.3.6.1.4.1.251.1.1.11.1
This table is used to control PLPP configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppCEntry

plppCEntry 1.3.6.1.4.1.251.1.1.11.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppCEntry  

plppCLinkNo 1.3.6.1.4.1.251.1.1.11.1.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppCLinkEnab 1.3.6.1.4.1.251.1.1.11.1.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppCCPLCPMode 1.3.6.1.4.1.251.1.1.11.1.1.3
The PLCP mode for link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), e1(2), g751-e3(3), ds1(4), ds3(5), g832-e3(6)  

plppCDS3Framer 1.3.6.1.4.1.251.1.1.11.1.1.4
Set to yes(1) to enable the DS3 framer mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppCScrambler 1.3.6.1.4.1.251.1.1.11.1.1.5
Set to no(2) to disable the scrambler mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppC0x55 1.3.6.1.4.1.251.1.1.11.1.1.6
If set to no(2) then HCS is not XORed with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppCCLine 1.3.6.1.4.1.251.1.1.11.1.1.7
Control line processing for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER processed(1), ignored(2)  

plppCLoopback 1.3.6.1.4.1.251.1.1.11.1.1.8
Set to yes(1) to enable loopback mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppCSmdsMode 1.3.6.1.4.1.251.1.1.11.1.1.12
Set to yes(1) to enable SMDS mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppCPloadTypeLab 1.3.6.1.4.1.251.1.1.11.1.1.13
Pay type label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

plppCTxTrlTrcIdLen 1.3.6.1.4.1.251.1.1.11.1.1.14
Trail trace length for transmit and expected receive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER l16(16), l64(64)  

plppCTxTrcId 1.3.6.1.4.1.251.1.1.11.1.1.15
Transmit trail trace identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(16..64)  

plppCRxExTrcId 1.3.6.1.4.1.251.1.1.11.1.1.16
Receive expected trail trace identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(16..64)  

plppSTable 1.3.6.1.4.1.251.1.1.11.2
The status table for plpp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppSEntry

plppSEntry 1.3.6.1.4.1.251.1.1.11.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppSEntry  

plppSLinkNo 1.3.6.1.4.1.251.1.1.11.2.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppSCLines 1.3.6.1.4.1.251.1.1.11.2.1.2
The state of control lines for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppSTXclock 1.3.6.1.4.1.251.1.1.11.2.1.3
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppSRXclock 1.3.6.1.4.1.251.1.1.11.2.1.4
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppSTXCells 1.3.6.1.4.1.251.1.1.11.2.1.5
The transmit cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSRXCells 1.3.6.1.4.1.251.1.1.11.2.1.6
The receive cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSHCSErrs 1.3.6.1.4.1.251.1.1.11.2.1.7
The header checksum error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSFrameErrs 1.3.6.1.4.1.251.1.1.11.2.1.11
The frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSBIP8Errs 1.3.6.1.4.1.251.1.1.11.2.1.12
The BIP-8 error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSFEBEErrs 1.3.6.1.4.1.251.1.1.11.2.1.13
The FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSSPLRStatus 1.3.6.1.4.1.251.1.1.11.2.1.14
The SPLR Status Register Contents.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plppSDs3Lcvs 1.3.6.1.4.1.251.1.1.11.2.1.15
The DS3 LCV count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSDs3FrameErrs 1.3.6.1.4.1.251.1.1.11.2.1.16
The DS3 frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSDs3ParityErrs 1.3.6.1.4.1.251.1.1.11.2.1.17
The DS3 parity error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSDs3CbitPrtyErrs 1.3.6.1.4.1.251.1.1.11.2.1.18
The DS3 control bit parity error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSDs3FEBEErrs 1.3.6.1.4.1.251.1.1.11.2.1.19
The DS3 FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppSDs3RxAIS 1.3.6.1.4.1.251.1.1.11.2.1.20
Receive DS3 AIS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppSDs3RxRedAlarm 1.3.6.1.4.1.251.1.1.11.2.1.21
Receive DS3 Red Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppSDs3RxYellowAlarm 1.3.6.1.4.1.251.1.1.11.2.1.22
Receive DS3 Yellow Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppSPLCPRxYellowAlarm 1.3.6.1.4.1.251.1.1.11.2.1.23
Receive PLCP Yellow Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppsRxTrIdMis 1.3.6.1.4.1.251.1.1.11.2.1.24
Receive trace id mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppsRxTrIdUnst 1.3.6.1.4.1.251.1.1.11.2.1.25
Receive trace id unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppsRxPloadTypeLabMis 1.3.6.1.4.1.251.1.1.11.2.1.26
Receive payload type label mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppsRxPloadTypeLabUnst 1.3.6.1.4.1.251.1.1.11.2.1.27
Receive payload type label unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppsRxTrlTrc 1.3.6.1.4.1.251.1.1.11.2.1.28
Last received trail trace message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(16..64)  

plppV2CTable 1.3.6.1.4.1.251.1.1.11.3
This table is used to control DS3-2C PLPP configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppV2CEntry

plppV2CEntry 1.3.6.1.4.1.251.1.1.11.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppV2CEntry  

plppV2CLinkNo 1.3.6.1.4.1.251.1.1.11.3.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppV2CLinkEnab 1.3.6.1.4.1.251.1.1.11.3.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2CCPLCPMode 1.3.6.1.4.1.251.1.1.11.3.1.3
Set to yes(1) to enable the PLCP layer mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2CDS3Framer 1.3.6.1.4.1.251.1.1.11.3.1.4
Set to yes(1) to enable the DS3 framer mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2CScrambler 1.3.6.1.4.1.251.1.1.11.3.1.5
Set to no(2) to disable the scrambler mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2C0x55 1.3.6.1.4.1.251.1.1.11.3.1.6
If set to no(2) then HCS is not XORed with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2CLoopback 1.3.6.1.4.1.251.1.1.11.3.1.7
Set to yes(1) to enable loopback mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2CSmdsMode 1.3.6.1.4.1.251.1.1.11.3.1.8
Set to yes(1) to enable SMDS mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2CFrmFmt 1.3.6.1.4.1.251.1.1.11.3.1.9
Set to yes(1) to enable C-bit parity framing format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER c-bit(1), clear-channel(2)  

plppV2CTxAIS 1.3.6.1.4.1.251.1.1.11.3.1.10
Set to yes(1) to enable framer to Txmt AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2STable 1.3.6.1.4.1.251.1.1.11.4
The status table for DS3-2C plpp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppV2SEntry

plppV2SEntry 1.3.6.1.4.1.251.1.1.11.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppV2SEntry  

plppV2SLinkNo 1.3.6.1.4.1.251.1.1.11.4.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppV2STXclock 1.3.6.1.4.1.251.1.1.11.4.1.2
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppV2SRXclock 1.3.6.1.4.1.251.1.1.11.4.1.3
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppV2STXCells 1.3.6.1.4.1.251.1.1.11.4.1.4
The transmit cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SRXCells 1.3.6.1.4.1.251.1.1.11.4.1.5
The receive cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SHCSErrs 1.3.6.1.4.1.251.1.1.11.4.1.6
The header checksum error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SFrameErrs 1.3.6.1.4.1.251.1.1.11.4.1.7
The frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SBIP8Errs 1.3.6.1.4.1.251.1.1.11.4.1.8
The BIP-8 error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SFEBEErrs 1.3.6.1.4.1.251.1.1.11.4.1.9
The FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SSPLRStatus 1.3.6.1.4.1.251.1.1.11.4.1.10
yes(1) indicates a PLCP LOF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SDs3FrmFmt 1.3.6.1.4.1.251.1.1.11.4.1.11
Operate in DS3 C-bit Parity or drop-back to Clear Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER c-bit(1), clear-channel(2)  

plppV2SDs3Lcvs 1.3.6.1.4.1.251.1.1.11.4.1.12
The DS3 LCV count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SDs3FrameErrs 1.3.6.1.4.1.251.1.1.11.4.1.13
The DS3 frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SDs3ParityErrs 1.3.6.1.4.1.251.1.1.11.4.1.14
The DS3 parity error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SDs3CbitPrtyErrs 1.3.6.1.4.1.251.1.1.11.4.1.15
The DS3 control bit parity error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SDs3FEBEErrs 1.3.6.1.4.1.251.1.1.11.4.1.16
The DS3 FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppV2SDs3RxAIS 1.3.6.1.4.1.251.1.1.11.4.1.17
Receive DS3 AIS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SDs3RxRedAlarm 1.3.6.1.4.1.251.1.1.11.4.1.18
Receive DS3 Red Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SDs3RxYellowAlarm 1.3.6.1.4.1.251.1.1.11.4.1.19
Receive DS3 Yellow Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppV2SPLCPRxYellowAlarm 1.3.6.1.4.1.251.1.1.11.4.1.20
Receive PLCP Yellow Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SDs3FEACTxmt 1.3.6.1.4.1.251.1.1.11.4.1.21
Code that has been transmitted as a FEAC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(7), line-loopback-active(6), line-loopback-deactive(5), ds3-idl(4), ds3-ais(3), ds3-oof(2), ds3-los(1)  

plppV2SRxIDL 1.3.6.1.4.1.251.1.1.11.4.1.22
yes(1) indicates an IDLE has been received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SLOC 1.3.6.1.4.1.251.1.1.11.4.1.23
Receive Loss of cell delineation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppV2SDs3LPBK 1.3.6.1.4.1.251.1.1.11.4.1.24
if yes(1), the DS3 Framer is in loopback.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1CTable 1.3.6.1.4.1.251.1.1.11.5
This table to control the E1-2C PLPP configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppE1CEntry

plppE1CEntry 1.3.6.1.4.1.251.1.1.11.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppE1CEntry  

plppE1CLinkNo 1.3.6.1.4.1.251.1.1.11.5.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppE1CLinkEnab 1.3.6.1.4.1.251.1.1.11.5.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE1CScrambler 1.3.6.1.4.1.251.1.1.11.5.1.3
Set to no(2) to disable the scrambler mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE1C0x55 1.3.6.1.4.1.251.1.1.11.5.1.4
If set to no(2) then HCS is not XORed with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE1CSmdsMode 1.3.6.1.4.1.251.1.1.11.5.1.5
Set to yes(1) to enable SMDS mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1CLpbk 1.3.6.1.4.1.251.1.1.11.5.1.6
Set to yes(1) to enable DOC Framer loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1STable 1.3.6.1.4.1.251.1.1.11.6
The status table for E1-2C plpp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppE1SEntry

plppE1SEntry 1.3.6.1.4.1.251.1.1.11.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppE1SEntry  

plppE1SLinkNo 1.3.6.1.4.1.251.1.1.11.6.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppE1STXclock 1.3.6.1.4.1.251.1.1.11.6.1.2
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppE1SRXclock 1.3.6.1.4.1.251.1.1.11.6.1.3
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

plppE1STXCells 1.3.6.1.4.1.251.1.1.11.6.1.4
The transmit cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SRXCells 1.3.6.1.4.1.251.1.1.11.6.1.5
The receive cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SHCSErrs 1.3.6.1.4.1.251.1.1.11.6.1.6
The HCS error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SCRCErrs 1.3.6.1.4.1.251.1.1.11.6.1.7
The CRC-4 error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SFrameErrs 1.3.6.1.4.1.251.1.1.11.6.1.8
The frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SFEBEErrs 1.3.6.1.4.1.251.1.1.11.6.1.9
The FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SLcvs 1.3.6.1.4.1.251.1.1.11.6.1.10
The E1 LCV count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE1SRxAIS 1.3.6.1.4.1.251.1.1.11.6.1.11
Receive E1 AIS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1SRxOOF 1.3.6.1.4.1.251.1.1.11.6.1.12
Receive E1 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1SRxLOS 1.3.6.1.4.1.251.1.1.11.6.1.13
Receive E1 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1SRxLOF 1.3.6.1.4.1.251.1.1.11.6.1.14
Receive E1 LOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE1SFerf 1.3.6.1.4.1.251.1.1.11.6.1.15
Receiving a Far-End Receive Failure if yes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3CTable 1.3.6.1.4.1.251.1.1.11.7
This table is used to control the E3-2C PLPP configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppE3CEntry

plppE3CEntry 1.3.6.1.4.1.251.1.1.11.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppE3CEntry  

plppE3CLinkNo 1.3.6.1.4.1.251.1.1.11.7.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppE3CLinkEnab 1.3.6.1.4.1.251.1.1.11.7.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE3CFramer 1.3.6.1.4.1.251.1.1.11.7.1.3
The E3 framer mode for the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g832(3), g751(2), none(1)  

plppE3CPLCPMode 1.3.6.1.4.1.251.1.1.11.7.1.4
The PLCP mode for the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), g751(3)  

plppE3CScrambler 1.3.6.1.4.1.251.1.1.11.7.1.5
Set to no(2) to disable the scrambler mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE3C0x55 1.3.6.1.4.1.251.1.1.11.7.1.6
If set to no(2) then HCS is not XORed with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE3CLoopback 1.3.6.1.4.1.251.1.1.11.7.1.7
Set to yes(1) to enable loopback mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3CSmdsMode 1.3.6.1.4.1.251.1.1.11.7.1.8
Set to yes(1) to enable SMDS mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3CTxmtTimMk 1.3.6.1.4.1.251.1.1.11.7.1.9
Set to yes(1) if traceable to primary ref clk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

plppE3CPloadTypeLab 1.3.6.1.4.1.251.1.1.11.7.1.10
Payload type label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atm(2)  

plppE3CTxTrlTrcIdLen 1.3.6.1.4.1.251.1.1.11.7.1.11
Trail trace length for transmit and expected receive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER length-16(16)  

plppE3CTxTrcIdUH 1.3.6.1.4.1.251.1.1.11.7.1.12
Transmit trail trace ID upper half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(8)  

plppE3CTxTrcIdLH 1.3.6.1.4.1.251.1.1.11.7.1.13
Transmit trail trace ID lower half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(8)  

plppE3CRxExTrcIdUH 1.3.6.1.4.1.251.1.1.11.7.1.14
Receive expected trail trace ID upper half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(8)  

plppE3CRxExTrcIdLH 1.3.6.1.4.1.251.1.1.11.7.1.15
Receive expected trail trace ID lower half.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress Size(8)  

plppE3STable 1.3.6.1.4.1.251.1.1.11.8
The E3-2C status table for plpp.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlppE3SEntry

plppE3SEntry 1.3.6.1.4.1.251.1.1.11.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlppE3SEntry  

plppE3SLinkNo 1.3.6.1.4.1.251.1.1.11.8.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

plppE3STXclock 1.3.6.1.4.1.251.1.1.11.8.1.2
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(2), up(1)  

plppE3SRXclock 1.3.6.1.4.1.251.1.1.11.8.1.3
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(2), up(1)  

plppE3STXCells 1.3.6.1.4.1.251.1.1.11.8.1.4
The transmit cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SRXCells 1.3.6.1.4.1.251.1.1.11.8.1.5
The receive cells count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SHCSErrs 1.3.6.1.4.1.251.1.1.11.8.1.6
The header checksum error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SE3FrameErrs 1.3.6.1.4.1.251.1.1.11.8.1.7
The E3 frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SPLCPFrameErrs 1.3.6.1.4.1.251.1.1.11.8.1.8
The PLCP frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SBIP8Errs 1.3.6.1.4.1.251.1.1.11.8.1.9
The BIP-8 error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SFEBEErrs 1.3.6.1.4.1.251.1.1.11.8.1.10
The FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SLcvs 1.3.6.1.4.1.251.1.1.11.8.1.11
The E3 LCV count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

plppE3SLcd 1.3.6.1.4.1.251.1.1.11.8.1.12
Receive Loss of cell delineation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxTrlTrc 1.3.6.1.4.1.251.1.1.11.8.1.13
Last received trail trace message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress Size(16)  

plppE3SRxAIS 1.3.6.1.4.1.251.1.1.11.8.1.14
Receive E3 AIS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxOOF 1.3.6.1.4.1.251.1.1.11.8.1.15
Receive E3 OOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxLOS 1.3.6.1.4.1.251.1.1.11.8.1.16
Receive E3 LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxLOF 1.3.6.1.4.1.251.1.1.11.8.1.17
Receive E3 LOF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxFERF 1.3.6.1.4.1.251.1.1.11.8.1.18
Receive E3 FERF status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SPLCPRxLof 1.3.6.1.4.1.251.1.1.11.8.1.19
The PLCP Rx LOF for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SPLCPRxYellowAlarm 1.3.6.1.4.1.251.1.1.11.8.1.20
Receive PLCP Yellow Alarm status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxTrIdMis 1.3.6.1.4.1.251.1.1.11.8.1.21
Receive trace id mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxTrIdUnst 1.3.6.1.4.1.251.1.1.11.8.1.22
Receive trace id unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxPloadTypeLabMis 1.3.6.1.4.1.251.1.1.11.8.1.23
Receive payload type label mismatch indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

plppE3SRxPloadTypeLabUnst 1.3.6.1.4.1.251.1.1.11.8.1.24
Receive payload type label unstable indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

lFibreConfTable 1.3.6.1.4.1.251.1.1.12.1
This table contains configuration information for the LFDOC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LFibreConfEntry

lFibreConfEntry 1.3.6.1.4.1.251.1.1.12.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LFibreConfEntry  

lFibreConfLinkNo 1.3.6.1.4.1.251.1.1.12.1.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

lFibreConfLinkEnab 1.3.6.1.4.1.251.1.1.12.1.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lFibreConfCLine 1.3.6.1.4.1.251.1.1.12.1.1.3
Set to ignored(2) to stop control line processing for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER processed(1), ignored(2)  

lFibreConfLoopback 1.3.6.1.4.1.251.1.1.12.1.1.4
Set to yes(1) to enable loopback mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

lFibreStatTable 1.3.6.1.4.1.251.1.1.12.2
This table contains status information for the LFDOC
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LFibreStatEntry

lFibreStatEntry 1.3.6.1.4.1.251.1.1.12.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LFibreStatEntry  

lFibreStatLinkNo 1.3.6.1.4.1.251.1.1.12.2.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

lFibreStatCLines 1.3.6.1.4.1.251.1.1.12.2.1.2
The state of control lines for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

lFibreStatHCSErrs 1.3.6.1.4.1.251.1.1.12.2.1.3
The header checksum error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1Table 1.3.6.1.4.1.251.1.1.13.1
ds1 Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds1Entry

ds1Entry 1.3.6.1.4.1.251.1.1.13.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds1Entry  

ds1LinkNo 1.3.6.1.4.1.251.1.1.13.1.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

ds1LineLength 1.3.6.1.4.1.251.1.1.13.1.1.2
Length of the line connected to the physical interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-feet(7), square(8)  

ds1Framing 1.3.6.1.4.1.251.1.1.13.1.1.3
T1 Framing type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), t1dm(3), slc96(4), esf4k(5), esf2k-3(6), esf2k-1(7)  

ds1Coding 1.3.6.1.4.1.251.1.1.13.1.1.4
The line code of incoming DS1 signal. ami(2) selects AMI line code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2)  

ds1Tr 1.3.6.1.4.1.251.1.1.13.1.1.5
Set to yes(1) to enable transmit loop-back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1Rt 1.3.6.1.4.1.251.1.1.13.1.1.6
Set to yes(1) to enable receive loop-back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1LOSDefect 1.3.6.1.4.1.251.1.1.13.1.1.7
Loss of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1AISDefect 1.3.6.1.4.1.251.1.1.13.1.1.8
AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1OOFDefect 1.3.6.1.4.1.251.1.1.13.1.1.9
OOF Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1YellowDefect 1.3.6.1.4.1.251.1.1.13.1.1.10
Yellow Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1LOSAlarm 1.3.6.1.4.1.251.1.1.13.1.1.11
Loss Of Signal alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1AISAlarm 1.3.6.1.4.1.251.1.1.13.1.1.12
AIS alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1LOFAlarm 1.3.6.1.4.1.251.1.1.13.1.1.13
Loss Of Frame alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1YellowAlarm 1.3.6.1.4.1.251.1.1.13.1.1.14
Yellow alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1PdvCount 1.3.6.1.4.1.251.1.1.13.1.1.15
Number of pulse density violations detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1Z16Count 1.3.6.1.4.1.251.1.1.13.1.1.16
Number of 16 consecutive zeroes detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1LcvCount 1.3.6.1.4.1.251.1.1.13.1.1.17
Number of line code violations detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1BeeCount 1.3.6.1.4.1.251.1.1.13.1.1.18
Number of block error events detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1FerCount 1.3.6.1.4.1.251.1.1.13.1.1.19
Number of framing bit error events detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1OofCount 1.3.6.1.4.1.251.1.1.13.1.1.20
Number of out of frame events detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1ClrStats 1.3.6.1.4.1.251.1.1.13.1.1.21
Clear counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1Reconfig 1.3.6.1.4.1.251.1.1.13.1.1.22
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1LineES 1.3.6.1.4.1.251.1.1.13.1.1.23
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1LineSES 1.3.6.1.4.1.251.1.1.13.1.1.24
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1ES 1.3.6.1.4.1.251.1.1.13.1.1.25
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1SES 1.3.6.1.4.1.251.1.1.13.1.1.26
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1AISS 1.3.6.1.4.1.251.1.1.13.1.1.27
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1UAS 1.3.6.1.4.1.251.1.1.13.1.1.28
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1TxClkSel 1.3.6.1.4.1.251.1.1.13.1.1.29
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-oscillator(12), local-link(13)  

ds1ExBERDefect 1.3.6.1.4.1.251.1.1.13.1.1.30
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1ExBERAlarm 1.3.6.1.4.1.251.1.1.13.1.1.31
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3Table 1.3.6.1.4.1.251.1.1.13.2
ds3 Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds3Entry

ds3Entry 1.3.6.1.4.1.251.1.1.13.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds3Entry  

ds3LinkNo 1.3.6.1.4.1.251.1.1.13.2.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

ds3Lb 1.3.6.1.4.1.251.1.1.13.2.1.2
Loop-back mode active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3Err 1.3.6.1.4.1.251.1.1.13.2.1.3
AIS or BPV detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3RXLos 1.3.6.1.4.1.251.1.1.13.2.1.4
Receive loss of signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3TXLoc 1.3.6.1.4.1.251.1.1.13.2.1.5
Transmit loss of clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3RXErr 1.3.6.1.4.1.251.1.1.13.2.1.6
Receive error detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3RXAis 1.3.6.1.4.1.251.1.1.13.2.1.7
Set to yes(1) to generate a receive AIS alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3TXAis 1.3.6.1.4.1.251.1.1.13.2.1.8
Set to yes(1) to transmit an AIS alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3TXLev 1.3.6.1.4.1.251.1.1.13.2.1.9
Transmit level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), high(2)  

ds3Tr 1.3.6.1.4.1.251.1.1.13.2.1.10
Transmit loop-back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3Rt 1.3.6.1.4.1.251.1.1.13.2.1.11
Set to yes(1) to enable receive loop-back.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3Equal 1.3.6.1.4.1.251.1.1.13.2.1.12
Equalisation type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER short(1), long(2)  

ds3LOSAlarm 1.3.6.1.4.1.251.1.1.13.2.1.13
Loss Of Signal Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3Reconfig 1.3.6.1.4.1.251.1.1.13.2.1.14
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1Table 1.3.6.1.4.1.251.1.1.13.5
E1-2C Config/Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E1Entry

e1Entry 1.3.6.1.4.1.251.1.1.13.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E1Entry  

e1LinkNo 1.3.6.1.4.1.251.1.1.13.5.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

e1LimType 1.3.6.1.4.1.251.1.1.13.5.1.2
LIM I.D. type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dual(1), quad(2), dual-sig(3), quad-sig(4)  

e1Lb 1.3.6.1.4.1.251.1.1.13.5.1.3
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line(2), payload(3), digital(4)  

e1FRMRMode 1.3.6.1.4.1.251.1.1.13.5.1.4
e1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crc-mfrm(1), basic(2), unframed(3)  

e1TxClkSel 1.3.6.1.4.1.251.1.1.13.5.1.5
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(11), loc-oscil(12), loc-link0(13), loc-link1(14), loc-link2(15), loc-link3(16)  

e1TS16PayLd 1.3.6.1.4.1.251.1.1.13.5.1.6
Employ TimeSlot 16 for customer data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1TxAIS 1.3.6.1.4.1.251.1.1.13.5.1.7
Transmit the AIS State.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1GappedClk 1.3.6.1.4.1.251.1.1.13.5.1.8
Select 1,(yes) for Circuit-emulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1IntrfType 1.3.6.1.4.1.251.1.1.13.5.1.9
E1 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER balanc-120(1), unbalan-75(2)  

e1ClrStats 1.3.6.1.4.1.251.1.1.13.5.1.10
Clear Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

e1Reconfig 1.3.6.1.4.1.251.1.1.13.5.1.11
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

se1SA4 1.3.6.1.4.1.251.1.1.13.5.1.12
Nat'l bit Sa4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SA5 1.3.6.1.4.1.251.1.1.13.5.1.13
Nat'l bit Sa5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SA6 1.3.6.1.4.1.251.1.1.13.5.1.14
Nat'l bit Sa6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SA7 1.3.6.1.4.1.251.1.1.13.5.1.15
Nat'l bit Sa7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SA8 1.3.6.1.4.1.251.1.1.13.5.1.16
Nat'l bit Sa8
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SI0 1.3.6.1.4.1.251.1.1.13.5.1.17
Int'l bit Si0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

se1SI1 1.3.6.1.4.1.251.1.1.13.5.1.18
Nat'l bit Si1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), on(1)  

e1LOSDefect 1.3.6.1.4.1.251.1.1.13.5.1.22
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1OOFDefect 1.3.6.1.4.1.251.1.1.13.5.1.23
Receive Out Of Frame
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1AISDefect 1.3.6.1.4.1.251.1.1.13.5.1.24
Receive AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1FerfDefect 1.3.6.1.4.1.251.1.1.13.5.1.25
Receive Yellow Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1ExBERDefect 1.3.6.1.4.1.251.1.1.13.5.1.26
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

e1LOSAlarm 1.3.6.1.4.1.251.1.1.13.5.1.37
Loss Of Signal Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1LOFAlarm 1.3.6.1.4.1.251.1.1.13.5.1.38
Loss Of Frame Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1AISAlarm 1.3.6.1.4.1.251.1.1.13.5.1.39
AIS Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1FerfAlarm 1.3.6.1.4.1.251.1.1.13.5.1.40
Yellow Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e1ExBERAlarm 1.3.6.1.4.1.251.1.1.13.5.1.41
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

e1SCRCErrs 1.3.6.1.4.1.251.1.1.13.5.1.52
The CRC-4 error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e1SFrameErrs 1.3.6.1.4.1.251.1.1.13.5.1.53
The frame error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e1SFEBEErrs 1.3.6.1.4.1.251.1.1.13.5.1.54
The FEBE error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e1SLcvs 1.3.6.1.4.1.251.1.1.13.5.1.55
The E1 LCV count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

e1LineES 1.3.6.1.4.1.251.1.1.13.5.1.66
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

e1LineSES 1.3.6.1.4.1.251.1.1.13.5.1.67
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

e1ES 1.3.6.1.4.1.251.1.1.13.5.1.68
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

e1SES 1.3.6.1.4.1.251.1.1.13.5.1.69
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

e1AISS 1.3.6.1.4.1.251.1.1.13.5.1.70
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

e1UAS 1.3.6.1.4.1.251.1.1.13.5.1.71
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

soTable 1.3.6.1.4.1.251.1.1.13.7
SOLIM/DELIM Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SoEntry

soEntry 1.3.6.1.4.1.251.1.1.13.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SoEntry  

soLinkNo 1.3.6.1.4.1.251.1.1.13.7.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

soLimType 1.3.6.1.4.1.251.1.1.13.7.1.2
Solim version
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER solim-v0(1), solim-v1(2), solim-v2(3)  

soTimingRef 1.3.6.1.4.1.251.1.1.13.7.1.3
Local timing reference
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(11), local-oscillator(12), local-link0(13), local-link1(14)  

soTxEn0 1.3.6.1.4.1.251.1.1.13.7.1.4
Link 0 Tx Enable (v2 and above)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

soTxEn1 1.3.6.1.4.1.251.1.1.13.7.1.5
Link 1 Tx Enable (v2 and above)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

soLimDesc 1.3.6.1.4.1.251.1.1.13.7.1.6
LIM Description
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pre-system-timing(1), dual-intermediate-reach(2), single-intermediate-reach(3), dual-short-reach(4), single-short-reach(5), dual-long-reach(6), single-long-reach(7), dual-hybrid-intermediate(8), dual-hybrid-long(9), dual-electrical(10)  

soReconfig 1.3.6.1.4.1.251.1.1.13.7.1.7
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2Table 1.3.6.1.4.1.251.1.1.13.9
ds1 V2 Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds1V2Entry

ds1V2Entry 1.3.6.1.4.1.251.1.1.13.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds1V2Entry  

ds1V2LinkNo 1.3.6.1.4.1.251.1.1.13.9.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

ds1V2LimType 1.3.6.1.4.1.251.1.1.13.9.1.2
LIM I.D. type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ds1-dual(1), ds1-quad(2), ds1-dual-signaling(3), ds1-quad-signaling(4)  

ds1V2TxLineLn 1.3.6.1.4.1.251.1.1.13.9.1.3
Select txmt line length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER feet-0-110(1), feet-110-220(2), feet-220-330(3), feet-330-440(4), feet-440-550(5), feet-550-660(6), more-than-655-feet(7), square(8)  

ds1V2FRMRMode 1.3.6.1.4.1.251.1.1.13.9.1.4
ds1V2 Framing options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sf(2), t1dm(3), slc96(4), esf4k(5), esf2K-3(6), esf2k-1(7)  

ds1V2Coding 1.3.6.1.4.1.251.1.1.13.9.1.5
If Line Coding is yes(1), AMI is selected
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(2), ami(1)  

ds1V2Lb 1.3.6.1.4.1.251.1.1.13.9.1.6
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line-lpbk(2), payload-lpbk(3), digital-lpbk(4)  

ds1V2TxAIS 1.3.6.1.4.1.251.1.1.13.9.1.7
Transmit the AIS State.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2GappedClk 1.3.6.1.4.1.251.1.1.13.9.1.8
Select 1,(yes) for Circuit-emulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1V2TxClkSel 1.3.6.1.4.1.251.1.1.13.9.1.9
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(11), local-oscillator(12), local-link0(13), local-link1(14), local-link2(15), local-link3(16)  

ds1V2ClrStats 1.3.6.1.4.1.251.1.1.13.9.1.10
Clear Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds1V2Reconfig 1.3.6.1.4.1.251.1.1.13.9.1.11
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2LOSDefect 1.3.6.1.4.1.251.1.1.13.9.1.22
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2OOFDefect 1.3.6.1.4.1.251.1.1.13.9.1.23
Receive Out Of Frame
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2AISDefect 1.3.6.1.4.1.251.1.1.13.9.1.24
Receive AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2FerfDefect 1.3.6.1.4.1.251.1.1.13.9.1.25
Receive FERF(Yellow) Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2BERDefect 1.3.6.1.4.1.251.1.1.13.9.1.26
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2LOSAlarm 1.3.6.1.4.1.251.1.1.13.9.1.37
Loss Of Signal Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2LOFAlarm 1.3.6.1.4.1.251.1.1.13.9.1.38
Loss Of Frame Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2AISAlarm 1.3.6.1.4.1.251.1.1.13.9.1.39
AIS Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2FerfAlarm 1.3.6.1.4.1.251.1.1.13.9.1.40
Yellow Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2BERAlarm 1.3.6.1.4.1.251.1.1.13.9.1.41
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds1V2FerCount 1.3.6.1.4.1.251.1.1.13.9.1.52
The framing bit error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds1V2BeeCount 1.3.6.1.4.1.251.1.1.13.9.1.53
The bit error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds1V2OCfCount 1.3.6.1.4.1.251.1.1.13.9.1.54
The Out-of-frame or Change of Frame alignment error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds1V2LcvCount 1.3.6.1.4.1.251.1.1.13.9.1.55
The DS1 Line code violations count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds1V2LineES 1.3.6.1.4.1.251.1.1.13.9.1.66
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2LineSES 1.3.6.1.4.1.251.1.1.13.9.1.67
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2ES 1.3.6.1.4.1.251.1.1.13.9.1.68
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2SES 1.3.6.1.4.1.251.1.1.13.9.1.69
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2AISS 1.3.6.1.4.1.251.1.1.13.9.1.70
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2UAS 1.3.6.1.4.1.251.1.1.13.9.1.71
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ds1V2ExBER 1.3.6.1.4.1.251.1.1.13.9.1.72
Excessive Bit Error Rate
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dlimLpbkTimeout 1.3.6.1.4.1.251.1.1.13.10
This parameter is used to set the dlim loopback timeout in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..604800  

ds3V2Table 1.3.6.1.4.1.251.1.1.13.11
ds3-2C Config/Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds3V2Entry

ds3V2Entry 1.3.6.1.4.1.251.1.1.13.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds3V2Entry  

ds3V2LinkNo 1.3.6.1.4.1.251.1.1.13.11.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

ds3V2Lb 1.3.6.1.4.1.251.1.1.13.11.1.2
Loopback Active
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), line-lpbk(1), local-lpbk(3)  

ds3V2LimType 1.3.6.1.4.1.251.1.1.13.11.1.3
LIM I.D. type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ds3-2c(1)  

ds3V2LimOK 1.3.6.1.4.1.251.1.1.13.11.1.4
LIM OK.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ds3V2TxLBO 1.3.6.1.4.1.251.1.1.13.11.1.5
Transmit line build-out,(1)for short cables.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER short(1), long(2)  

ds3V2TxClkSel 1.3.6.1.4.1.251.1.1.13.11.1.6
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(11), local-oscillator(12), link0-plcp(17), link1-plcp(18)  

ds3V2LOSDefect 1.3.6.1.4.1.251.1.1.13.11.1.8
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3V2LOSAlarm 1.3.6.1.4.1.251.1.1.13.11.1.9
Loss Of Signal Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

ds3V2Reconfig 1.3.6.1.4.1.251.1.1.13.11.1.10
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e3Table 1.3.6.1.4.1.251.1.1.13.12
E3-2C Config/Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E3Entry

e3Entry 1.3.6.1.4.1.251.1.1.13.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E3Entry  

e3LinkNo 1.3.6.1.4.1.251.1.1.13.12.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

e3LimType 1.3.6.1.4.1.251.1.1.13.12.1.2
LIM I.D. type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER e3-2c(1)  

e3LimOK 1.3.6.1.4.1.251.1.1.13.12.1.3
LIM OK.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e3EQSelect 1.3.6.1.4.1.251.1.1.13.12.1.4
Rx Line Equalization select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), set-0-to-3p5-dB(2), set-2p6-to-8-dB(3), set-6-to-9p9-dB(4), set-8p6-to-13p2-dB(5)  

e3Loopback 1.3.6.1.4.1.251.1.1.13.12.1.6
Loopback LIU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(3), line-lpbk(1), local-lpbk(2)  

e3TxAIS 1.3.6.1.4.1.251.1.1.13.12.1.7
Transmit AIS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e3TxClkSel 1.3.6.1.4.1.251.1.1.13.12.1.8
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(11), local-oscillator(12), local-link0(13), local-link1(14)  

e3LOSDefect 1.3.6.1.4.1.251.1.1.13.12.1.9
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e3LOSAlarm 1.3.6.1.4.1.251.1.1.13.12.1.10
Loss Of Signal Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

e3Reconfig 1.3.6.1.4.1.251.1.1.13.12.1.11
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

hssiTable 1.3.6.1.4.1.251.1.1.13.13
hssi Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HssiEntry

hssiEntry 1.3.6.1.4.1.251.1.1.13.13.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HssiEntry  

hssiLinkNo 1.3.6.1.4.1.251.1.1.13.13.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

hssiLocalLoopback 1.3.6.1.4.1.251.1.1.13.13.1.2
Local Loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line(2), internal(3), bilateral(4)  

hssiRemoteLoopback 1.3.6.1.4.1.251.1.1.13.13.1.3
Remote Loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line(2), digital(3), remote-line(4)  

hssiReconfig 1.3.6.1.4.1.251.1.1.13.13.1.4
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

hssiType 1.3.6.1.4.1.251.1.1.13.13.1.15
Type of link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

hssiLimType 1.3.6.1.4.1.251.1.1.13.13.1.16
LIM Version
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hssi-v1(1)  

hssiClockSrc 1.3.6.1.4.1.251.1.1.13.13.1.17
Source of clock. Note that for a DCE, from-DCE(4) should not be selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), from-dce(2), local-45Mbps(3), local-34Mbps(4)  

hssiCtrTestMode 1.3.6.1.4.1.251.1.1.13.13.1.18
Test Mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hssiLinkReady 1.3.6.1.4.1.251.1.1.13.13.1.19
Set to yes(1) if link is ready.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hssiRemoteReady 1.3.6.1.4.1.251.1.1.13.13.1.20
Set to yes(1) if remote link is ready.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hssiLOSDefect 1.3.6.1.4.1.251.1.1.13.13.1.25
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

hssiLOSAlarm 1.3.6.1.4.1.251.1.1.13.13.1.30
Loss Of Signal Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2Table 1.3.6.1.4.1.251.1.1.13.14
J2 Config/Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    J2Entry

j2Entry 1.3.6.1.4.1.251.1.1.13.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  J2Entry  

j2LinkNo 1.3.6.1.4.1.251.1.1.13.14.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

j2FirmwareRev 1.3.6.1.4.1.251.1.1.13.14.1.3
Firmware Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

j2TxEq 1.3.6.1.4.1.251.1.1.13.14.1.4
Select equalizer setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low-dB(1), high-dB(2)  

j2Lb 1.3.6.1.4.1.251.1.1.13.14.1.6
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), liu-line(2), j2-Framer-Payload(3), j2-Framer-Digital(4)  

j2TxAIS 1.3.6.1.4.1.251.1.1.13.14.1.7
Transmit the AIS State.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2TxClkSel 1.3.6.1.4.1.251.1.1.13.14.1.9
Transmit clock select.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system-bus(11), int-oscillator(12), link-0(13), link-1(14)  

j2ClrStats 1.3.6.1.4.1.251.1.1.13.14.1.10
Clear Counters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

j2Reconfig 1.3.6.1.4.1.251.1.1.13.14.1.11
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2TS97TS98 1.3.6.1.4.1.251.1.1.13.14.1.12
Set the value (in hex) of the bytes to be transmitted in time slots 97 and 98 of the J2 frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Hex  

j2QualClock 1.3.6.1.4.1.251.1.1.13.14.1.20
Quality of Clock Selection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low-Primary(1), low-Secondary(2), high-Primary(3), high-Secondary(4), local-Oscillator(5)  

j2LOSDefect 1.3.6.1.4.1.251.1.1.13.14.1.22
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2OOFDefect 1.3.6.1.4.1.251.1.1.13.14.1.23
Receive Out Of Frame
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2AISDefect 1.3.6.1.4.1.251.1.1.13.14.1.24
Receive AIS Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2RAlmDefect 1.3.6.1.4.1.251.1.1.13.14.1.26
Remote Alarm Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2LOSAlarm 1.3.6.1.4.1.251.1.1.13.14.1.37
Loss Of Signal Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2LOFAlarm 1.3.6.1.4.1.251.1.1.13.14.1.38
Loss Of Frame Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2AISAlarm 1.3.6.1.4.1.251.1.1.13.14.1.39
AIS Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2RAlmAlarm 1.3.6.1.4.1.251.1.1.13.14.1.41
Remote Alarm Condition
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

j2FerCount 1.3.6.1.4.1.251.1.1.13.14.1.52
The framing bit error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

j2RAlmCount 1.3.6.1.4.1.251.1.1.13.14.1.53
The Remote Alarm error count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

j2LcvCount 1.3.6.1.4.1.251.1.1.13.14.1.55
The J2 Line code violations count for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

j2CrcCount 1.3.6.1.4.1.251.1.1.13.14.1.56
Number of J2 muliframes received with CRC errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2LineES 1.3.6.1.4.1.251.1.1.13.14.1.66
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2LineSES 1.3.6.1.4.1.251.1.1.13.14.1.67
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2ES 1.3.6.1.4.1.251.1.1.13.14.1.68
Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2SES 1.3.6.1.4.1.251.1.1.13.14.1.69
Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2AISS 1.3.6.1.4.1.251.1.1.13.14.1.70
AIS Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

j2UAS 1.3.6.1.4.1.251.1.1.13.14.1.71
Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scfTable 1.3.6.1.4.1.251.1.1.13.15
SCF Config/Status Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScfEntry

scfEntry 1.3.6.1.4.1.251.1.1.13.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScfEntry  

scfLinkNo 1.3.6.1.4.1.251.1.1.13.15.1.1
Link number - this is the instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

scfLimType 1.3.6.1.4.1.251.1.1.13.15.1.2
LIM I.D. type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER si-dual(1), si-quad(2)  

scfFirmwareRev 1.3.6.1.4.1.251.1.1.13.15.1.3
Firmware Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

scfQualClock 1.3.6.1.4.1.251.1.1.13.15.1.4
Quality of Clock Selection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low-Primary(1), low-Secondary(2), high-Primary(3), high-Secondary(4), local-Oscillator(5)  

scfContr 1.3.6.1.4.1.251.1.1.13.15.1.5
Controller Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ce-hpg-hc2(1), ms-ms2(2)  

scfDCEDTE 1.3.6.1.4.1.251.1.1.13.15.1.6
DCE or DTE Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dce(1), dte(2)  

scfLb 1.3.6.1.4.1.251.1.1.13.15.1.7
Loopback Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), line(2), link(3), digital(4)  

scfLineTiming 1.3.6.1.4.1.251.1.1.13.15.1.8
Receive Line Timing Selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

scfDataRate 1.3.6.1.4.1.251.1.1.13.15.1.9
Data Rate Selection in K Bit/Sec
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rate-2x4(1), rate-4x8(2), rate-7x2(3), rate-9x6(4), rate-14x4(5), rate-16x0(6), rate-16x6(7), rate-19x2(8), rate-28x8(9), rate-32x0(10), rate-38x4(11), rate-48x0(12), rate-50x0(13), rate-56x0(14), rate-57x6(15), rate-64x0(16), rate-76x8(17), rate-96x0(18), rate-112x0(19), rate-115x2(20), rate-128x0(21), rate-144x0(22), rate-153x6(23), rate-192x0(24), rate-224x0(25), rate-230x0(26), rate-256x0(27), rate-288x0(28), rate-307x2(29), rate-320x0(30), rate-384x0(31), rate-448x0(32), rate-512x0(33), rate-768x0(34), rate-1024x0(35), rate-1536x0(36), rate-1920x0(37), rate-2048x0(38), rate-3072x0(39), rate-4096x0(40), rate-6144x0(41), rate-8192x0(42)  

scfClkSel 1.3.6.1.4.1.251.1.1.13.15.1.10
Clock select
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(1), localOscillator(2)  

scfInterfaceType 1.3.6.1.4.1.251.1.1.13.15.1.11
Interface type selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x21(1), rs449(2), eia530-A(3), v35(4)  

scfReconfig 1.3.6.1.4.1.251.1.1.13.15.1.12
Reconfigure Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

scfLOSDefect 1.3.6.1.4.1.251.1.1.13.15.1.13
Loss Of Signal Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

scfLOSAlarm 1.3.6.1.4.1.251.1.1.13.15.1.14
Loss Of Signal Integrated Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

billAvailable 1.3.6.1.4.1.251.1.1.14.1
Number of billing records available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billingTable 1.3.6.1.4.1.251.1.1.14.3
This table is used to contain billing records.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BillingEntry

billingEntry 1.3.6.1.4.1.251.1.1.14.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BillingEntry  

billSeq 1.3.6.1.4.1.251.1.1.14.3.1.1
billing record sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

billSvpi 1.3.6.1.4.1.251.1.1.14.3.1.2
Source Virtual Path Identifier for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

billSvci 1.3.6.1.4.1.251.1.1.14.3.1.3
Source Virtual Circuit Identifier for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

billDvpi 1.3.6.1.4.1.251.1.1.14.3.1.4
Destination Virtual Path Identifier for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

billDvci 1.3.6.1.4.1.251.1.1.14.3.1.5
Destination Virtual Circuit Identifier for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

billSslot 1.3.6.1.4.1.251.1.1.14.3.1.6
Source slot for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


billDslot 1.3.6.1.4.1.251.1.1.14.3.1.8
Destination slot for VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


billCalled 1.3.6.1.4.1.251.1.1.14.3.1.10
Called or Destination E.164 address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164  

billCalledSub 1.3.6.1.4.1.251.1.1.14.3.1.11
Called or Destination E.164 sub-address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

billCalling 1.3.6.1.4.1.251.1.1.14.3.1.12
Calling or Originating E.164 address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164  

billCallingSub 1.3.6.1.4.1.251.1.1.14.3.1.13
Calling or Originating E.164 sub-address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

billCellInC 1.3.6.1.4.1.251.1.1.14.3.1.14
Cell in overflows count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billCellIn 1.3.6.1.4.1.251.1.1.14.3.1.15
Cell in count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billFrameIn 1.3.6.1.4.1.251.1.1.14.3.1.16
Frame in count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billByteInC 1.3.6.1.4.1.251.1.1.14.3.1.17
Byte in overflows count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billByteIn 1.3.6.1.4.1.251.1.1.14.3.1.18
Byte in count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billCellOutC 1.3.6.1.4.1.251.1.1.14.3.1.19
Cell out overflows count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billCellOut 1.3.6.1.4.1.251.1.1.14.3.1.20
Cell out count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billFrameOut 1.3.6.1.4.1.251.1.1.14.3.1.21
Frame out count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billByteOutC 1.3.6.1.4.1.251.1.1.14.3.1.22
Byte out overflows count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billByteOut 1.3.6.1.4.1.251.1.1.14.3.1.23
Byte out count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billCause 1.3.6.1.4.1.251.1.1.14.3.1.25
Clear cause code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billValid 1.3.6.1.4.1.251.1.1.14.3.1.28
Deletes billing record Entry by setting to invalid(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), block-invalid(3)  

billCLP1OutC 1.3.6.1.4.1.251.1.1.14.3.1.29
CLP1 out overflows count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billCLP1Out 1.3.6.1.4.1.251.1.1.14.3.1.30
CLP1 out count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

billTag 1.3.6.1.4.1.251.1.1.14.3.1.31
This identifies the billable SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billStartM2 1.3.6.1.4.1.251.1.1.14.3.1.32
Call start date-time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

billEndM2 1.3.6.1.4.1.251.1.1.14.3.1.33
Call end date-time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

billFwdPCR 1.3.6.1.4.1.251.1.1.14.3.1.34
SVC Forward Peak Cell Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billBwdPCR 1.3.6.1.4.1.251.1.1.14.3.1.35
SVC Backward Peak Cell Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billFwdSCR 1.3.6.1.4.1.251.1.1.14.3.1.36
SVC Forward Sustained Cell Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billBwdSCR 1.3.6.1.4.1.251.1.1.14.3.1.37
SVC Backward Sustained Cell Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billFwdMBS 1.3.6.1.4.1.251.1.1.14.3.1.38
SVC Forward Maximum Burst Size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billBwdMBS 1.3.6.1.4.1.251.1.1.14.3.1.39
SVC Backward Maximum Burst Size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

billFwdQOS 1.3.6.1.4.1.251.1.1.14.3.1.40
Forward Quality of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER qos1(1), qos2(2), qos3(3), qos4(4), abr(6), cbr(7), vbrRt(8), vbrNrt(9)  

billBwdQOS 1.3.6.1.4.1.251.1.1.14.3.1.41
Backward Quality of Service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER qos1(1), qos2(2), qos3(3), qos4(4), abr(6), cbr(7), vbrRt(8), vbrNrt(9)  

billingControl 1.3.6.1.4.1.251.1.1.14.4
This object is set to start SPVC/PVC process.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER stop-billing-process(1), start-SPVC-billing-process(2), start-PVC-billing-process(3), start-SPVC-and-PVC-billing(4), delete-all-billing-records(5), start-SVC-billing-process(6), start-SVC-and-PVC-billing(7)  

billLost 1.3.6.1.4.1.251.1.1.14.7
Lost of billing record count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  


billTrapControl 1.3.6.1.4.1.251.1.1.14.9
This object is set to enable or disable billing traps
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

billDirControl 1.3.6.1.4.1.251.1.1.14.10
This object is selected for uni-direction billing or bi-direction billing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni-direction(1), bi-direction(2)  

billingInterval 1.3.6.1.4.1.251.1.1.14.12
This parameter is used to set the billing period in 15/30/60/120 minute intervals
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER period15min(1), period30min(2), period60min(3), period120min(4)  

qeDocMacAddress 1.3.6.1.4.1.251.1.1.15.1
MAC address of Ethernet ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

qeDocTunRetryPeriod 1.3.6.1.4.1.251.1.1.15.2
Number of seconds between retries of tunnel establishment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..60  

qeDocTunIdlePeriod 1.3.6.1.4.1.251.1.1.15.3
Number of seconds to wait without activity before clearing tunnel call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

qeDocBridgeTable 1.3.6.1.4.1.251.1.1.15.4
This table is used to statistics and control for the bridges.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QeDocBridgeEntry

qeDocBridgeEntry 1.3.6.1.4.1.251.1.1.15.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QeDocBridgeEntry  

qeDocBridgeLinkNo 1.3.6.1.4.1.251.1.1.15.4.1.1
Link number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

qeDocBridgeEnable 1.3.6.1.4.1.251.1.1.15.4.1.2
Set to yes(1) to enable MAC bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocBridgeLink0Eligible 1.3.6.1.4.1.251.1.1.15.4.1.3
Link 0 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocBridgeLink1Eligible 1.3.6.1.4.1.251.1.1.15.4.1.4
Link 1 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocBridgeLink2Eligible 1.3.6.1.4.1.251.1.1.15.4.1.5
Link 2 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocBridgeLink3Eligible 1.3.6.1.4.1.251.1.1.15.4.1.6
Link 3 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunTable 1.3.6.1.4.1.251.1.1.15.6
This table is used to establish and control tunnels set-up using SVCs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QeDocTunEntry

qeDocTunEntry 1.3.6.1.4.1.251.1.1.15.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QeDocTunEntry  

qeDocTunIndex 1.3.6.1.4.1.251.1.1.15.6.1.1
The tunnel index number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

qeDocTunName 1.3.6.1.4.1.251.1.1.15.6.1.2
Mnemonic name for tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

qeDocTunType 1.3.6.1.4.1.251.1.1.15.6.1.3
Specifies the type of tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unused(1), ip(2), mac-bridge(3)  

qeDocTunState 1.3.6.1.4.1.251.1.1.15.6.1.4
Set to Use pvc(2) if using with a PVC. Set to Use svc(3) if using with a SVC. Set to idle(1) to prevent tunnel being established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), use-pvc(2), use-svc(3), failed(4)  

qeDocTunCallState 1.3.6.1.4.1.251.1.1.15.6.1.5
State of tunnel call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), allocated(2), waccept(3), active(4)  

qeDocTunInFrames 1.3.6.1.4.1.251.1.1.15.6.1.6
Received frames count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

qeDocTunOutFrames 1.3.6.1.4.1.251.1.1.15.6.1.7
Transmitted frames count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

qeDocTunVPI 1.3.6.1.4.1.251.1.1.15.6.1.8
VPI being used for the tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

qeDocTunVCI 1.3.6.1.4.1.251.1.1.15.6.1.9
VCI being used for the tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

qeDocTunPriority 1.3.6.1.4.1.251.1.1.15.6.1.10
Cell priority bit value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

qeDocTunSlot 1.3.6.1.4.1.251.1.1.15.6.1.11
Target slot for tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


qeDocTunRemNet 1.3.6.1.4.1.251.1.1.15.6.1.13
Remote network address for tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocTunRemMask 1.3.6.1.4.1.251.1.1.15.6.1.14
Mask for remote network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocTunLocNet 1.3.6.1.4.1.251.1.1.15.6.1.15
Local network address for tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocTunLocMask 1.3.6.1.4.1.251.1.1.15.6.1.16
Mask for local network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocTunRemStartSkt 1.3.6.1.4.1.251.1.1.15.6.1.17
Specifies start of socket range from remote that is allowed/barred from access to tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

qeDocTunRemEndSkt 1.3.6.1.4.1.251.1.1.15.6.1.18
Specifies end of socket range from remote that is allowed/barred from access to tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

qeDocTunLocStartSkt 1.3.6.1.4.1.251.1.1.15.6.1.19
Specifies start of socket range from local that is allowed/barred from access to tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

qeDocTunLocEndSkt 1.3.6.1.4.1.251.1.1.15.6.1.20
Specifies end of socket range from local that is allowed/barred from access to tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

qeDocTunSktType 1.3.6.1.4.1.251.1.1.15.6.1.21
Specifies the protocol type and whether to include or exclude frames with socket number in the specified range.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcpInc-udpInc(4), tcpInc-udpExc(3), tcpExc-udpInc(2), tcpExc-udpExc(1)  

qeDocTunDestAddress 1.3.6.1.4.1.251.1.1.15.6.1.22
Destination address for tunnel. This is only required for SVC tunnels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

qeDocTunDestSubAddress 1.3.6.1.4.1.251.1.1.15.6.1.23
Destination sub-address for tunnel. This is only required for SVC tunnels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164SUB  

qeDocTunLink0Eligible 1.3.6.1.4.1.251.1.1.15.6.1.24
Link 0 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunLink1Eligible 1.3.6.1.4.1.251.1.1.15.6.1.25
Link 1 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunLink2Eligible 1.3.6.1.4.1.251.1.1.15.6.1.26
Link 2 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunLink3Eligible 1.3.6.1.4.1.251.1.1.15.6.1.27
Link 3 eligible for frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunValidity 1.3.6.1.4.1.251.1.1.15.6.1.28
Setting to invalid(2) removes the row from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

qeDocTunRfc1483Encap 1.3.6.1.4.1.251.1.1.15.6.1.29
Setting to yes(1) enable RFC 1483 LLC encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qeDocTunClp 1.3.6.1.4.1.251.1.1.15.6.1.31
Cell loss priority bit value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

qeDocIpAddress 1.3.6.1.4.1.251.1.1.15.7
The IP address of the QEDOC for management use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocIpMask 1.3.6.1.4.1.251.1.1.15.8
The mask for management use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

qeDocIpBCast 1.3.6.1.4.1.251.1.1.15.9
The management broadcast address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

sdhCTable 1.3.6.1.4.1.251.1.1.16.1
This table is used to control sdh/Sonet configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdhCEntry

sdhCEntry 1.3.6.1.4.1.251.1.1.16.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdhCEntry  

sdhCLinkNo 1.3.6.1.4.1.251.1.1.16.1.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

sdhCLinkEnab 1.3.6.1.4.1.251.1.1.16.1.1.2
Set to yes(1) to enable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhCLoopTimer 1.3.6.1.4.1.251.1.1.16.1.1.3
Set to yes(1) to enable loop timing for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

sdhCLoopDiag 1.3.6.1.4.1.251.1.1.16.1.1.4
Set to yes(1) to enable diagnostic loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

sdhCLoopLine 1.3.6.1.4.1.251.1.1.16.1.1.5
Set to yes(1) to enable line loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

sdhCScrambler 1.3.6.1.4.1.251.1.1.16.1.1.6
Set to no(2) to disable scramble mode for this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhC0x55 1.3.6.1.4.1.251.1.1.16.1.1.7
If set to no(2) then HCS is XORed with 0x55
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSonetSdh 1.3.6.1.4.1.251.1.1.16.1.1.8
If set to sdh(2) then sdh header is used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

sdhClearCounts 1.3.6.1.4.1.251.1.1.16.1.1.9
Clear Error Counts and Performance Parameters
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

sdhReconfig 1.3.6.1.4.1.251.1.1.16.1.1.10
Perform Reconfiguration for Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

sdhCLpbkTimeout 1.3.6.1.4.1.251.1.1.16.1.1.11
This parameter is used to set the loopback timeout in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..604800  

sdhStmSts 1.3.6.1.4.1.251.1.1.16.1.1.12
Set to 155.52(1) for STS-3c/STM-1 format
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oc-3(1), oc-1(2)  

sdhAPSOnOff 1.3.6.1.4.1.251.1.1.16.1.1.13
If set to on(2) then sdh APS is used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

sdhCIdleCell 1.3.6.1.4.1.251.1.1.16.1.1.14
Idle Cell Header Contents
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unassigned(1), idle(2)  

sdhSTable 1.3.6.1.4.1.251.1.1.16.3
The status table for sdh/SONET.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdhSEntry

sdhSEntry 1.3.6.1.4.1.251.1.1.16.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdhSEntry  

sdhSLinkNo 1.3.6.1.4.1.251.1.1.16.3.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

sdhSTXclock 1.3.6.1.4.1.251.1.1.16.3.1.2
The state of TX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

sdhSRXclock 1.3.6.1.4.1.251.1.1.16.3.1.3
The state of RX clock for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

sdhSSectLOS 1.3.6.1.4.1.251.1.1.16.3.1.4
The loss of signal indicator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSSectOOF 1.3.6.1.4.1.251.1.1.16.3.1.5
The out of frame indicator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSSectLOF 1.3.6.1.4.1.251.1.1.16.3.1.6
The loss of frame indicator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSLineAIS 1.3.6.1.4.1.251.1.1.16.3.1.7
Set to yes(1) if Line AIS detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSLineFERF 1.3.6.1.4.1.251.1.1.16.3.1.8
Set to yes(1) if Line FERF detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathAIS 1.3.6.1.4.1.251.1.1.16.3.1.9
Set to yes(1) if Alarm Indication Signal detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathYellow 1.3.6.1.4.1.251.1.1.16.3.1.10
Set to yes(1) if yellow alarm active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathFERF 1.3.6.1.4.1.251.1.1.16.3.1.11
Set to yes(1) if Far End Receive Failure detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathLOP 1.3.6.1.4.1.251.1.1.16.3.1.12
Set to yes(1) if Loss Of Pointer detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathLabelMM 1.3.6.1.4.1.251.1.1.16.3.1.13
Set to yes(1) if a Path Label Mismatch is detected
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSExBERDefect 1.3.6.1.4.1.251.1.1.16.3.1.14
Excessive Bit Error Rate Defect
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSPathLabel 1.3.6.1.4.1.251.1.1.16.3.1.15
The Path Label.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER atm(1), non-atm(2)  

sdhSCellDelState 1.3.6.1.4.1.251.1.1.16.3.1.16
The Cell Delineation State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hunt-or-presync(1), sync(2)  

sdhSAlarmLOS 1.3.6.1.4.1.251.1.1.16.3.1.17
Set to yes(1) if a LOS failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmLOF 1.3.6.1.4.1.251.1.1.16.3.1.18
Set to yes(1) if a LOF failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmLineAIS 1.3.6.1.4.1.251.1.1.16.3.1.19
Set to yes(1) if a Line AIS failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmLineRFI 1.3.6.1.4.1.251.1.1.16.3.1.20
Set to yes(1) if a Line Remote Failure Indication (Yellow Alarm) failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmPathAIS 1.3.6.1.4.1.251.1.1.16.3.1.21
Set to yes(1) if a Path AIS failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmPathRFI 1.3.6.1.4.1.251.1.1.16.3.1.22
Set to yes(1) if a Path Remote Failure Indication (Yellow Alarm) failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmLOP 1.3.6.1.4.1.251.1.1.16.3.1.23
Set to yes(1) if a LOP failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSAlarmPLM 1.3.6.1.4.1.251.1.1.16.3.1.24
Set to yes(1) if a Payload Mismatch failure is declared
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSExBERAlarm 1.3.6.1.4.1.251.1.1.16.3.1.25
Excessive Bit Error Rate Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sdhSCorrHCS 1.3.6.1.4.1.251.1.1.16.3.1.26
The correctable HCS errors count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSUnCorrHCS 1.3.6.1.4.1.251.1.1.16.3.1.27
The uncorrectable HCS errors count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhS2Table 1.3.6.1.4.1.251.1.1.16.4
The second status table for sdh/SONET.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdhS2Entry

sdhS2Entry 1.3.6.1.4.1.251.1.1.16.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdhS2Entry  

sdhS2LinkNo 1.3.6.1.4.1.251.1.1.16.4.1.1
The link number for this status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

sdhSSectBIP8 1.3.6.1.4.1.251.1.1.16.4.1.2
Section BIP-8 error count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSSectES 1.3.6.1.4.1.251.1.1.16.4.1.3
Section Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSSectSES 1.3.6.1.4.1.251.1.1.16.4.1.4
Section Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineBIP24 1.3.6.1.4.1.251.1.1.16.4.1.5
Line BIP-24 error count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineES 1.3.6.1.4.1.251.1.1.16.4.1.6
Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineSES 1.3.6.1.4.1.251.1.1.16.4.1.7
Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineUAS 1.3.6.1.4.1.251.1.1.16.4.1.8
Line Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFC 1.3.6.1.4.1.251.1.1.16.4.1.9
Line Failure Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathBIP8 1.3.6.1.4.1.251.1.1.16.4.1.10
The path BIP-8 count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathES 1.3.6.1.4.1.251.1.1.16.4.1.11
Path Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathSES 1.3.6.1.4.1.251.1.1.16.4.1.12
Path Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathUAS 1.3.6.1.4.1.251.1.1.16.4.1.13
Path Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFC 1.3.6.1.4.1.251.1.1.16.4.1.14
Path Failure Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFEBE 1.3.6.1.4.1.251.1.1.16.4.1.15
Far end block errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFarEndES 1.3.6.1.4.1.251.1.1.16.4.1.16
Far End Line Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFarEndSES 1.3.6.1.4.1.251.1.1.16.4.1.17
Far End Line Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFarEndUAS 1.3.6.1.4.1.251.1.1.16.4.1.18
Far End Line Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSLineFarEndFC 1.3.6.1.4.1.251.1.1.16.4.1.19
Far End Line Failure Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFEBE 1.3.6.1.4.1.251.1.1.16.4.1.20
The Path Far End Block Error count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFarEndES 1.3.6.1.4.1.251.1.1.16.4.1.21
Far End Path Errored Second
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFarEndSES 1.3.6.1.4.1.251.1.1.16.4.1.22
Far End Path Severely Errored Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFarEndUAS 1.3.6.1.4.1.251.1.1.16.4.1.23
Far End Path Unavailable Seconds
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sdhSPathFarEndFC 1.3.6.1.4.1.251.1.1.16.4.1.24
Far End Path Failure Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

pvcResourceTable 1.3.6.1.4.1.251.1.1.17.1
This table contains information about the resource available for pvcs on each link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PvcResourceEntry

pvcResourceEntry 1.3.6.1.4.1.251.1.1.17.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PvcResourceEntry  

pvcSlot 1.3.6.1.4.1.251.1.1.17.1.1.1
The slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


pvcVciStart 1.3.6.1.4.1.251.1.1.17.1.1.3
Identifies the start of the range of PVC VCI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

pvcVciEnd 1.3.6.1.4.1.251.1.1.17.1.1.4
Identifies the end of the range of PVC VCI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

pvcVpiStart 1.3.6.1.4.1.251.1.1.17.1.1.5
Identifies the start of the range of PVC VPI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcVpiEnd 1.3.6.1.4.1.251.1.1.17.1.1.6
Identifies the end of the range of PVC VPI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcVpStart 1.3.6.1.4.1.251.1.1.17.1.1.7
Identifies the start of the range of VPs supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcVpEnd 1.3.6.1.4.1.251.1.1.17.1.1.8
Identifies the end of the range of VPs supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcBackwardCellRateTotal 1.3.6.1.4.1.251.1.1.17.1.1.11
The backward total cell rate configured for PVCs on this link. Note that this object is in cells per second (CPS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcLinkQoS 1.3.6.1.4.1.251.1.1.17.1.1.13
This specifies the type of ATM link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni(1), nni(2), b-ici(3), non-atm-link(4)  

pvcMolnVpi 1.3.6.1.4.1.251.1.1.17.1.1.14
This is the VPI for the management overlay network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

pvcMolnVci 1.3.6.1.4.1.251.1.1.17.1.1.15
This is the VCI for the management overlay network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

pvcLowPriOverbookFactor 1.3.6.1.4.1.251.1.1.17.1.1.16
This is the percentage of low priority traffic overbook factor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

pvcTable 1.3.6.1.4.1.251.1.1.17.2
This table contains information on each PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PvcEntry

pvcEntry 1.3.6.1.4.1.251.1.1.17.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PvcEntry  

pvcDSlot 1.3.6.1.4.1.251.1.1.17.2.1.1
The destination slot for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  


pvcDvci 1.3.6.1.4.1.251.1.1.17.2.1.3
The destination virtual circuit identifier for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

pvcDvpi 1.3.6.1.4.1.251.1.1.17.2.1.4
The destination virtual path identifier for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcSSlot 1.3.6.1.4.1.251.1.1.17.2.1.5
The source slot for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  


pvcSvci 1.3.6.1.4.1.251.1.1.17.2.1.7
The source virtual circuit identifier for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

pvcSvpi 1.3.6.1.4.1.251.1.1.17.2.1.8
The source virtual path identifier for the PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

pvcForwardPeakCellRate 1.3.6.1.4.1.251.1.1.17.2.1.9
Forward Peak Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcForwardPeakSize 1.3.6.1.4.1.251.1.1.17.2.1.10
Forward Peak Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcForwardPeakMode 1.3.6.1.4.1.251.1.1.17.2.1.11
Forward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4)  

pvcBackwardPeakCellRate 1.3.6.1.4.1.251.1.1.17.2.1.12
Backward Peak Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcBackwardPeakSize 1.3.6.1.4.1.251.1.1.17.2.1.13
Backward Peak Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcBackwardPeakMode 1.3.6.1.4.1.251.1.1.17.2.1.14
Backward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4)  

pvcForwardSustainedCellRate 1.3.6.1.4.1.251.1.1.17.2.1.15
Forward Sustained Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcForwardSustainedSize 1.3.6.1.4.1.251.1.1.17.2.1.16
Forward Sustained Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcForwardSustainedMode 1.3.6.1.4.1.251.1.1.17.2.1.17
Forward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8)  

pvcBackwardSustainedCellRate 1.3.6.1.4.1.251.1.1.17.2.1.18
Backward Sustained Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcBackwardSustainedSize 1.3.6.1.4.1.251.1.1.17.2.1.19
Backward Sustained Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcBackwardSustainedMode 1.3.6.1.4.1.251.1.1.17.2.1.20
Backward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8)  

pvcAuxForwardPeakCellRate 1.3.6.1.4.1.251.1.1.17.2.1.21
Auxiliary Forward Peak Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxForwardPeakSize 1.3.6.1.4.1.251.1.1.17.2.1.22
Auxiliary Forward Peak Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxForwardPeakMode 1.3.6.1.4.1.251.1.1.17.2.1.23
Auxiliary Forward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4)  

pvcAuxBackwardPeakCellRate 1.3.6.1.4.1.251.1.1.17.2.1.24
Auxiliary Backward Peak Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxBackwardPeakSize 1.3.6.1.4.1.251.1.1.17.2.1.25
Auxiliary Backward Peak Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxBackwardPeakMode 1.3.6.1.4.1.251.1.1.17.2.1.26
Auxiliary Backward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4)  

pvcAuxForwardSustainedCellRate 1.3.6.1.4.1.251.1.1.17.2.1.27
Auxiliary Forward Sustained Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxForwardSustainedSize 1.3.6.1.4.1.251.1.1.17.2.1.28
Auxiliary Forward Sustained Bucket Size (Cells)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxForwardSustainedMode 1.3.6.1.4.1.251.1.1.17.2.1.29
Auxiliary Forward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8)  

pvcAuxBackwardSustainedCellRate 1.3.6.1.4.1.251.1.1.17.2.1.30
Auxiliary Backward Sustained Cell Rate (CPS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxBackwardSustainedSize 1.3.6.1.4.1.251.1.1.17.2.1.31
Auxiliary Backward Sustained Bucket Size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

pvcAuxBackwardSustainedMode 1.3.6.1.4.1.251.1.1.17.2.1.32
Auxiliary Backward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-disc(2), clp1-disc(3), clp01-disc(4), clp0-tag(6), clp01-tag(8)  

pvcQoSClass 1.3.6.1.4.1.251.1.1.17.2.1.33
CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service - low priority and the cells may be discard.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), vbr-high(2), vbr-med(3), vbr-low(4)  

pvcStatus 1.3.6.1.4.1.251.1.1.17.2.1.34
If this object is set to invalid(2), the PVC entry is removed. Set to start-PVC(3) to activate the PVC. When the state changes to running(5) then the PVC is successfully running. (6) pvc restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), start-PVC(3), notified(4), running(5), waiting(6)  

pvcMulticast 1.3.6.1.4.1.251.1.1.17.2.1.35
If this object is set to no, multicast is not allowed; otherwise, multicast is allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

pvcInternalVpi 1.3.6.1.4.1.251.1.1.17.2.1.36
This object indicates the internal VPI value that the source side of multicast tree ranslates its orignal VPI to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pvcInternalVci 1.3.6.1.4.1.251.1.1.17.2.1.37
This object indicates the internal VCI value that the source side of multicast tree ranslates its orignal VCI to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pvcNumLeaves 1.3.6.1.4.1.251.1.1.17.2.1.38
This object indicates the number of leaves this multicast tree currently contains.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pvcDirection 1.3.6.1.4.1.251.1.1.17.2.1.39
This object determines if a multicast PVC is to be unidirectional or bidirectional
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bidirect(1), unidirect(2)  

svcMaxPtPtConnections 1.3.6.1.4.1.251.1.1.18.1
The maximum number of point-to-point connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..750  

svcMaxPtMptConnections 1.3.6.1.4.1.251.1.1.18.2
The maximum number of point-to-multipoint connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..25  

svcMaxPtMptParties 1.3.6.1.4.1.251.1.1.18.3
The maximum number of parties in a point-to-multipoint connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..500  

svcResourceTable 1.3.6.1.4.1.251.1.1.18.6
This table contains information about the resource available for svcs on each link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcResourceEntry

svcResourceEntry 1.3.6.1.4.1.251.1.1.18.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcResourceEntry  

svcSAP 1.3.6.1.4.1.251.1.1.18.6.1.1
Identifies the SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

svcHiLo 1.3.6.1.4.1.251.1.1.18.6.1.2
Select VPI/VCI values from low to high or high to low
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(2), high(1)  

svcVciStart 1.3.6.1.4.1.251.1.1.18.6.1.3
Identifies the start of the range of SVC VCI values supported on this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 32..4095  

svcVciEnd 1.3.6.1.4.1.251.1.1.18.6.1.4
Identifies the end of the range of SVC VCI values supported on this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 32..4095  

svcVpiStart 1.3.6.1.4.1.251.1.1.18.6.1.5
Identifies the start of the range of SVC VPI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

svcVpiEnd 1.3.6.1.4.1.251.1.1.18.6.1.6
Identifies the end of the range of SVC VPI values supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

svcVpStart 1.3.6.1.4.1.251.1.1.18.6.1.7
Identifies the start of the range of SVPs supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

svcVpEnd 1.3.6.1.4.1.251.1.1.18.6.1.8
Identifies the end of the range of SVPs supported on this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

svcBackwardCellRateTotal 1.3.6.1.4.1.251.1.1.18.6.1.11
The backward total cell rate configured for SVCs on this link. Note that this object is in cells per second (CPS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

svcBackwardCellRateAvailable 1.3.6.1.4.1.251.1.1.18.6.1.12
The backward cell rate available for SVCs on this link. Note that this object is in cells per second (CPS).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcSigVci 1.3.6.1.4.1.251.1.1.18.6.1.13
The VCI used for signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..511  

svcSigVpi 1.3.6.1.4.1.251.1.1.18.6.1.14
The VPI used for signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

svcSAPStatus 1.3.6.1.4.1.251.1.1.18.6.1.15
Select on(4) to activate the SAP, off(1) to deactivate, reconfigure(2) to hot reconfigure the vci/vpi ranges and reset(3) to clear all calls on the SAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), reconfigure(2), reset(3), on(4), idle(5)  

svcCDVTSize 1.3.6.1.4.1.251.1.1.18.6.1.16
Cell Delay Variation Tolerance size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcIntType 1.3.6.1.4.1.251.1.1.18.6.1.17
Interface type - NETWORK or USER.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), user(2)  

svcPolicing 1.3.6.1.4.1.251.1.1.18.6.1.18
Policing - ON or OFF
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

svcLowPriOverbookFactor 1.3.6.1.4.1.251.1.1.18.6.1.19
This is the percentage of low priority traffic overbook factor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

svcMaxSapConn 1.3.6.1.4.1.251.1.1.18.6.1.20
Maximum SVCs this SAP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..750  

svcCurSapConn 1.3.6.1.4.1.251.1.1.18.6.1.21
Current SVC count this SAP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcLinkNo 1.3.6.1.4.1.251.1.1.18.6.1.22
This is the physical link number associated with this SAP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

svcVpiMapping 1.3.6.1.4.1.251.1.1.18.6.1.23
VPI and VPCI mapping status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

svcQosRoute 1.3.6.1.4.1.251.1.1.18.6.1.24
QoS based route
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

svcSwtch 1.3.6.1.4.1.251.1.1.18.6.1.25
UNI Interface Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uni30(1), uni31(2), iisp30(3), iisp31(4)  

svcRestart 1.3.6.1.4.1.251.1.1.18.6.1.26
Send Restart when link is up
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

svcE164Addr 1.3.6.1.4.1.251.1.1.18.6.1.27
The E.164 address for this SAP
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

svcAutoSapOff 1.3.6.1.4.1.251.1.1.18.6.1.28
This option allows a Sap Status to be automatically turned OFF after T309 expiry. Select Yes(1) if a sap (which was ON before) is to be turned OFF after T309 expiry, else select No(2). By default, No(2) is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

svcTable 1.3.6.1.4.1.251.1.1.18.7
This table contains information on each on SVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcEntry

svcEntry 1.3.6.1.4.1.251.1.1.18.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcEntry  

svcId 1.3.6.1.4.1.251.1.1.18.7.1.1
The svc ID number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

svcDSlot 1.3.6.1.4.1.251.1.1.18.7.1.2
The destination slot of the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


svcDvci 1.3.6.1.4.1.251.1.1.18.7.1.4
The destination virtual circuit identifier for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

svcDvpi 1.3.6.1.4.1.251.1.1.18.7.1.5
The destination virtual path identifier for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

svcDE164 1.3.6.1.4.1.251.1.1.18.7.1.6
The destination E.164 address for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164  

svcDE164Sub 1.3.6.1.4.1.251.1.1.18.7.1.7
The destination sub-address for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

svcSSlot 1.3.6.1.4.1.251.1.1.18.7.1.8
The source slot of the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


svcSvci 1.3.6.1.4.1.251.1.1.18.7.1.10
The source virtual circuit identifier for a SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

svcSvpi 1.3.6.1.4.1.251.1.1.18.7.1.11
The source virtual path identifier for a SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

svcSE164 1.3.6.1.4.1.251.1.1.18.7.1.12
The source E.164 address for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164  

svcSE164Sub 1.3.6.1.4.1.251.1.1.18.7.1.13
The source sub-address for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

svcForwardPeakCellRate 1.3.6.1.4.1.251.1.1.18.7.1.14
The forward user cell rate for a SVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to the responding user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcForwardPeakMode 1.3.6.1.4.1.251.1.1.18.7.1.15
SVC/SVP Forward Peak Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8)  

svcBackwardPeakCellRate 1.3.6.1.4.1.251.1.1.18.7.1.16
The backward user cell rate for a SVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to the initiating user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcBackwardPeakMode 1.3.6.1.4.1.251.1.1.18.7.1.17
SVC/SVP Backward Peak Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8)  

svcForwardSustainableCellRate 1.3.6.1.4.1.251.1.1.18.7.1.18
The sustainable forward cell rate for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcForwardMaxBurstSize 1.3.6.1.4.1.251.1.1.18.7.1.19
The forward maximum burst size for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcForwardSustainableMode 1.3.6.1.4.1.251.1.1.18.7.1.20
SVC/SVP Forward Sustained Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8)  

svcBackwardSustainableCellRate 1.3.6.1.4.1.251.1.1.18.7.1.21
The sustainable backward cell rate for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcBackwardMaxBurstSize 1.3.6.1.4.1.251.1.1.18.7.1.22
The backward maximum burst size for the SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcBackwardSustainableMode 1.3.6.1.4.1.251.1.1.18.7.1.23
SVC/SVP Backward Sustained Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6), clp01-tag(8)  

svcQoSClass 1.3.6.1.4.1.251.1.1.18.7.1.24
CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) is a `best effort' service - low priority and the cells may be discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER qos1(1), qos2(2), qos3(3), qos4(4), ubrBe(5), abr(6), cbr(7), vbrRt(8), vbrNrt(9)  

svcBillTag 1.3.6.1.4.1.251.1.1.18.7.1.25
This identifies the billable SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcDuration 1.3.6.1.4.1.251.1.1.18.7.1.26
Duration of the SVC in milliseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

svcType 1.3.6.1.4.1.251.1.1.18.7.1.27
The type of SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER point-to-point(1), point-to-multipoint(2)  

svcStatus 1.3.6.1.4.1.251.1.1.18.7.1.28
If this object is set to invalid (2), the SVC is cleared and the entry is removed. If set to active(4) then the SVC is active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), invalid(2), reset(3), active(5)  

svcNumLeaves 1.3.6.1.4.1.251.1.1.18.7.1.29
Number of multicast leaves
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcInternalVpi 1.3.6.1.4.1.251.1.1.18.7.1.30
internal VPI used for multicast operation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcInternalVci 1.3.6.1.4.1.251.1.1.18.7.1.31
internal VCI used for multicast operation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sPvcTable 1.3.6.1.4.1.251.1.1.18.8
This table contains information on Semi-Permanent Virtual Circuits (SPVCs).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SPvcEntry

sPvcEntry 1.3.6.1.4.1.251.1.1.18.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SPvcEntry  

sPvcId 1.3.6.1.4.1.251.1.1.18.8.1.1
Slot-unique SPVC identifier.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..750  

sPvcCallId 1.3.6.1.4.1.251.1.1.18.8.1.2
Call identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


sPvcAddress 1.3.6.1.4.1.251.1.1.18.8.1.4
The E.164 address for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

sPvcForwardPeakCellRate 1.3.6.1.4.1.251.1.1.18.8.1.5
The forward user cell rate for an SPVC. The forward user cell rate is a measurement of bandwidth available to the initiating user to transfer information to the responding user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcForwardPeakMode 1.3.6.1.4.1.251.1.1.18.8.1.6
SPVC/SPVP Forward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp01-discard(4)  

sPvcBackwardPeakCellRate 1.3.6.1.4.1.251.1.1.18.8.1.7
The backward user cell rate for an SPVC. The backward user cell rate is a measurement of bandwidth available to the responding user to transfer information to the initiating user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcBackwardPeakMode 1.3.6.1.4.1.251.1.1.18.8.1.8
SPVC/SPVP Backward Peak Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp01-discard(4)  

sPvcForwardSustainableCellRate 1.3.6.1.4.1.251.1.1.18.8.1.9
The sustainable forward cell rate for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcForwardMaxBurstSize 1.3.6.1.4.1.251.1.1.18.8.1.10
The forward maximum burst size for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcForwardSustainableMode 1.3.6.1.4.1.251.1.1.18.8.1.11
SPVC/SPVP Forward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6)  

sPvcBackwardSustainableCellRate 1.3.6.1.4.1.251.1.1.18.8.1.12
The sustainable backward cell rate for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcBackwardMaxBurstSize 1.3.6.1.4.1.251.1.1.18.8.1.13
The backward maximum burst size for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

sPvcBackwardSustainableMode 1.3.6.1.4.1.251.1.1.18.8.1.14
SPVC/SPVP Backward Sustained Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), clp0-discard(2), clp01-discard(4), clp0-tag(6)  

sPvcQoSClass 1.3.6.1.4.1.251.1.1.18.8.1.15
CBR(1) is a constant bit rate service, vbr-high(2) is variable bit rate with high priority, vbr-med(3) has low priority, vbr-low(4) has low priority and the cells may be discarded, best-effort is the same as vbr-low except no bandwidth is reserved.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), vbr-high(2), vbr-med(3), vbr-low(4), best-effort(5)  

sPvcSourceVci 1.3.6.1.4.1.251.1.1.18.8.1.16
The source virtual circuit identifier for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

sPvcSourceVpi 1.3.6.1.4.1.251.1.1.18.8.1.17
The source virtual path identifier for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

sPvcTargetVci 1.3.6.1.4.1.251.1.1.18.8.1.18
The target virtual circuit identifier for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

sPvcTargetVpi 1.3.6.1.4.1.251.1.1.18.8.1.19
The target virtual path identifier for the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

sPvcRetry 1.3.6.1.4.1.251.1.1.18.8.1.20
Retry timeout. Zero represents an infinite timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

sPvcConnectTime 1.3.6.1.4.1.251.1.1.18.8.1.21
Connect time in ms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sPvcNumberRetries 1.3.6.1.4.1.251.1.1.18.8.1.22
Number of retries to attempt. Zero represents no limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

sPvcFailures 1.3.6.1.4.1.251.1.1.18.8.1.23
A count of the SPVC setup failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sPvcAlertFailures 1.3.6.1.4.1.251.1.1.18.8.1.24
Describes the circumstances under which to issue an Alert message to the NMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-trap(1), fail(2), fail-or-clear(3), fail-all-attempts(4), call-success(5), trap-all(6), trap-state-change(7)  

sPvcCauseDiag 1.3.6.1.4.1.251.1.1.18.8.1.25
Cause and diagnostic codes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Q93bCauseDiag  

sPvcType 1.3.6.1.4.1.251.1.1.18.8.1.26
If the SPVC entry is passive, it will not try to initiate a call. An active will attempt to build an SPVC at intervals set by the retry field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passive(1), active(2)  

sPvcCallState 1.3.6.1.4.1.251.1.1.18.8.1.27
Sets the state of the SPVC. Set the value to invalid(3) to tear down the SPVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), call-setup(2), reset(3), invalid(4)  

sPvcStatus 1.3.6.1.4.1.251.1.1.18.8.1.28
Describes the state of the SPVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), sPVC-wait(2), l4-wait(3), active(4)  

sPvcCauseDiagCode 1.3.6.1.4.1.251.1.1.18.8.1.29
Cause and diagnostic codes as defined in UNI-3.0 Annex E .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sPvcMulticast 1.3.6.1.4.1.251.1.1.18.8.1.30
pt-pt - point-to-point SPVC; pt-mpt - point-to-multipoint SPVC; bidirect-root: pt-mpt birection root.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pt-pt(1), pt-mpt-root(2), pt-mpt-leaf(3), bidirect-root(4)  

svcQ93bStatTable 1.3.6.1.4.1.251.1.1.18.9
This table contains statistical protocol information for each link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcQ93bStatEntry

svcQ93bStatEntry 1.3.6.1.4.1.251.1.1.18.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcQ93bStatEntry  

svcQ93bStatSAP 1.3.6.1.4.1.251.1.1.18.9.1.1
This is the layer 3 Service Access Point for the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

svcQ93bStatActive 1.3.6.1.4.1.251.1.1.18.9.1.2
Number of calls currently active on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAccumalative 1.3.6.1.4.1.251.1.1.18.9.1.3
Total number of calls established on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatCallProcTx 1.3.6.1.4.1.251.1.1.18.9.1.4
Call Proceeding pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatConnTx 1.3.6.1.4.1.251.1.1.18.9.1.5
Connect pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatConnAckTx 1.3.6.1.4.1.251.1.1.18.9.1.6
Connect Acknowledge pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatSetupTx 1.3.6.1.4.1.251.1.1.18.9.1.7
Setup pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRelTx 1.3.6.1.4.1.251.1.1.18.9.1.8
Release pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRelCmpltTx 1.3.6.1.4.1.251.1.1.18.9.1.9
Release Complete pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRstTx 1.3.6.1.4.1.251.1.1.18.9.1.10
Restart pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRstAckTx 1.3.6.1.4.1.251.1.1.18.9.1.11
Restart Acknowledge pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatStatTx 1.3.6.1.4.1.251.1.1.18.9.1.12
Status pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatStatEnqTx 1.3.6.1.4.1.251.1.1.18.9.1.13
Status Enquiry pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyTx 1.3.6.1.4.1.251.1.1.18.9.1.14
Add Party pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyAckTx 1.3.6.1.4.1.251.1.1.18.9.1.15
Add Party Acknowledge pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyRejTx 1.3.6.1.4.1.251.1.1.18.9.1.16
Add Party Reject pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatDropPtyTx 1.3.6.1.4.1.251.1.1.18.9.1.17
Drop Party pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatDropPtyAckTx 1.3.6.1.4.1.251.1.1.18.9.1.18
Drop Party Acknowledge pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatLstCauseTx 1.3.6.1.4.1.251.1.1.18.9.1.19
Last cause code transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatLstDiagTx 1.3.6.1.4.1.251.1.1.18.9.1.20
Last diagnostic code transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatCallProcRx 1.3.6.1.4.1.251.1.1.18.9.1.21
Call Proceeding pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatConnRx 1.3.6.1.4.1.251.1.1.18.9.1.22
Connect pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatConnAckRx 1.3.6.1.4.1.251.1.1.18.9.1.23
Connect Acknowledge pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatSetupRx 1.3.6.1.4.1.251.1.1.18.9.1.24
Setup pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRelRx 1.3.6.1.4.1.251.1.1.18.9.1.25
Release pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRelCmpltRx 1.3.6.1.4.1.251.1.1.18.9.1.26
Release Complete pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRstRx 1.3.6.1.4.1.251.1.1.18.9.1.27
Restart pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatRstAckRx 1.3.6.1.4.1.251.1.1.18.9.1.28
Restart Acknowledge pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatStatRx 1.3.6.1.4.1.251.1.1.18.9.1.29
Status pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatStatEnqRx 1.3.6.1.4.1.251.1.1.18.9.1.30
Status Enquiry pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyRx 1.3.6.1.4.1.251.1.1.18.9.1.31
Add Party pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyAckRx 1.3.6.1.4.1.251.1.1.18.9.1.32
Add Party Acknowledge pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatAddPtyRejRx 1.3.6.1.4.1.251.1.1.18.9.1.33
Add Party Reject pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatDropPtyRx 1.3.6.1.4.1.251.1.1.18.9.1.34
Drop Party pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatDropPtyAckRx 1.3.6.1.4.1.251.1.1.18.9.1.35
Drop Party Acknowledge pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatLstCauseRx 1.3.6.1.4.1.251.1.1.18.9.1.36
Last cause code received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatLstDiagRx 1.3.6.1.4.1.251.1.1.18.9.1.37
Last diagnostic code received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQ93bStatClr 1.3.6.1.4.1.251.1.1.18.9.1.38
Clear Q.93B statistics for this SAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

svcQ93bStatDiagTx 1.3.6.1.4.1.251.1.1.18.9.1.39
Tx SAP diagnostic codes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Q93bCauseDiag  

svcQ93bStatDiagRx 1.3.6.1.4.1.251.1.1.18.9.1.40
Rx SAP diagnostic codes
Status: mandatory Access: read-only
OBJECT-TYPE    
  Q93bCauseDiag  

svcQsaalStatTable 1.3.6.1.4.1.251.1.1.18.10
This table contains protocol information for the Q.SAAL layer for each link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcQsaalStatEntry

svcQsaalStatEntry 1.3.6.1.4.1.251.1.1.18.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcQsaalStatEntry  

svcQsaalStatSAP 1.3.6.1.4.1.251.1.1.18.10.1.1
This is the layer 3 Service Access Point for the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

svcQsaalStatOutSduDisc 1.3.6.1.4.1.251.1.1.18.10.1.2
Outgoing SDUs discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatInPduErr 1.3.6.1.4.1.251.1.1.18.10.1.3
Number of incoming PDUs with a reception error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatInPduDisc 1.3.6.1.4.1.251.1.1.18.10.1.4
Number of incoming PDUs discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatOutPduErr 1.3.6.1.4.1.251.1.1.18.10.1.5
Number of outgoing PDUs with a transmission error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatOutPduDisc 1.3.6.1.4.1.251.1.1.18.10.1.6
Number of outgoing PDUs discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgnTx 1.3.6.1.4.1.251.1.1.18.10.1.7
BGN pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgakTx 1.3.6.1.4.1.251.1.1.18.10.1.8
BGAK pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgrejTx 1.3.6.1.4.1.251.1.1.18.10.1.9
BGREJ pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatEndTx 1.3.6.1.4.1.251.1.1.18.10.1.10
END pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatRsTx 1.3.6.1.4.1.251.1.1.18.10.1.11
RS pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatRsakTx 1.3.6.1.4.1.251.1.1.18.10.1.12
RSAK pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatSdTx 1.3.6.1.4.1.251.1.1.18.10.1.13
SD pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatSdpTx 1.3.6.1.4.1.251.1.1.18.10.1.14
SDP pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatPollTx 1.3.6.1.4.1.251.1.1.18.10.1.15
POLL pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatStatTx 1.3.6.1.4.1.251.1.1.18.10.1.16
STAT pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatUstatTx 1.3.6.1.4.1.251.1.1.18.10.1.17
USTAT pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatUdTx 1.3.6.1.4.1.251.1.1.18.10.1.18
UD pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatMdTx 1.3.6.1.4.1.251.1.1.18.10.1.19
MD pdus transmitted on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgnRx 1.3.6.1.4.1.251.1.1.18.10.1.20
BGN pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgakRx 1.3.6.1.4.1.251.1.1.18.10.1.21
BGAK pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatBgrejRx 1.3.6.1.4.1.251.1.1.18.10.1.22
BGREJ pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatEndRx 1.3.6.1.4.1.251.1.1.18.10.1.23
END pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatRsRx 1.3.6.1.4.1.251.1.1.18.10.1.24
RS pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatRsakRx 1.3.6.1.4.1.251.1.1.18.10.1.25
RSAK pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatSdRx 1.3.6.1.4.1.251.1.1.18.10.1.26
SD pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatSdpRx 1.3.6.1.4.1.251.1.1.18.10.1.27
SDP pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatPollRx 1.3.6.1.4.1.251.1.1.18.10.1.28
POLL pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatStatRx 1.3.6.1.4.1.251.1.1.18.10.1.29
STAT pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatUstatRx 1.3.6.1.4.1.251.1.1.18.10.1.30
USTAT pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatUdRx 1.3.6.1.4.1.251.1.1.18.10.1.31
UD pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatMdRx 1.3.6.1.4.1.251.1.1.18.10.1.32
MD pdus received on this SAP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

svcQsaalStatClr 1.3.6.1.4.1.251.1.1.18.10.1.33
Clear statistics for this SAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

svcQsaalTmrPoll 1.3.6.1.4.1.251.1.1.18.11
SSCOP Timer_POLL (8=800ms).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQsaalTmrKeepAlive 1.3.6.1.4.1.251.1.1.18.12
SSCOP Timer_KEEPALIVE (20=2seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQsaalTmrNoResponse 1.3.6.1.4.1.251.1.1.18.13
SSCOP Timer_NORESPONSE (100=10seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQsaalTmrCC 1.3.6.1.4.1.251.1.1.18.14
SSCOP Timer_CC (20=2seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQsaalMaxPD 1.3.6.1.4.1.251.1.1.18.15
SSCOP Maximum PD.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT303 1.3.6.1.4.1.251.1.1.18.16
Q.93B T303 (40=4seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT310 1.3.6.1.4.1.251.1.1.18.17
Q.93B T310 (200=20seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT308 1.3.6.1.4.1.251.1.1.18.18
Q.93B T308 (300=30seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT309 1.3.6.1.4.1.251.1.1.18.19
Q.93B T309 (150=15seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

maxOutstanding 1.3.6.1.4.1.251.1.1.18.20
Max Outgoing Outstanding Calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

svcLoadRoute 1.3.6.1.4.1.251.1.1.18.21
Poke point for loading routing tables
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER both(1), none(2), rte-table(3), dtl-bin(4)  

svcHalfConTimer 1.3.6.1.4.1.251.1.1.18.22
SVC half connect recovery poll timer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3000  

svcHalfConCnt 1.3.6.1.4.1.251.1.1.18.23
SVC half connect counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT398 1.3.6.1.4.1.251.1.1.18.24
Q.93B T398 (40= 4 seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcQ93bTmrT399 1.3.6.1.4.1.251.1.1.18.25
Q.93B T399 (140= 14 seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

svcRetryPeriod 1.3.6.1.4.1.251.1.1.18.26
Retry Period
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..180  

svcCellRateTable 1.3.6.1.4.1.251.1.1.18.27
This table contains information about the limitations on Cell Rates on link
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcCellRateEntry

svcCellRateEntry 1.3.6.1.4.1.251.1.1.18.27.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcCellRateEntry  

svcCRLinkNo 1.3.6.1.4.1.251.1.1.18.27.1.1
This is the physical link number associated with this SAP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

svcPCRCLP01Max 1.3.6.1.4.1.251.1.1.18.27.1.2
PCRCLP01 Max(0 disables checking)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777216  

svcSCRMax 1.3.6.1.4.1.251.1.1.18.27.1.3
SCR Max(0 disables checking)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777216  

svcMBSMax 1.3.6.1.4.1.251.1.1.18.27.1.4
MBS Max(0 disables checking)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777216  

svcTrafficTable 1.3.6.1.4.1.251.1.1.18.28
This table contains information about the limitations on Cell Rates on link
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SvcTrafficEntry

svcTrafficEntry 1.3.6.1.4.1.251.1.1.18.28.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SvcTrafficEntry  

svcTLinkNo 1.3.6.1.4.1.251.1.1.18.28.1.1
Lnk Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

svcCBRallowed 1.3.6.1.4.1.251.1.1.18.28.1.2
Allows or disallows CBR traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

svcVBRHallowed 1.3.6.1.4.1.251.1.1.18.28.1.3
Allows or disallows VBR High traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

svcVBRMallowed 1.3.6.1.4.1.251.1.1.18.28.1.4
Allows or disallows VBR Med traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

svcVBRLUBRallowed 1.3.6.1.4.1.251.1.1.18.28.1.5
Allows or disallows VBR Low/UBR traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

svcVBRLUBRsubtractpercent 1.3.6.1.4.1.251.1.1.18.28.1.6
Specifies a percentage of BW to be subtracted for VBR Low/UBR traffic
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

ceTable 1.3.6.1.4.1.251.1.1.19.1
Configuration Table for dv2CE Links
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CeEntry

ceEntry 1.3.6.1.4.1.251.1.1.19.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CeEntry  

ceLinkNo 1.3.6.1.4.1.251.1.1.19.1.1.1
Link Number for Table Entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

ceEnable 1.3.6.1.4.1.251.1.1.19.1.1.2
Setting to yes(1) enables the Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2), restart(3)  

ceMode 1.3.6.1.4.1.251.1.1.19.1.1.3
Service Clock Recovery Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), adaptive(2), srts(3)  

cePriority 1.3.6.1.4.1.251.1.1.19.1.1.4
Set to high for normal CBR operation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(1), low(2)  

cePvcValid 1.3.6.1.4.1.251.1.1.19.1.1.5
Indicates if valid PVC exists for Link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceDstSlot 1.3.6.1.4.1.251.1.1.19.1.1.6
Destination Slot for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


ceDstVpi 1.3.6.1.4.1.251.1.1.19.1.1.8
Destination VPI for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

ceDstVci 1.3.6.1.4.1.251.1.1.19.1.1.9
Destination VCI for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

ceCDV 1.3.6.1.4.1.251.1.1.19.1.1.10
Cell Delay Variation Tolerance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

ceCDVMax 1.3.6.1.4.1.251.1.1.19.1.1.11
Cell Delay Variation Tolerance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..62  

ceMulticast 1.3.6.1.4.1.251.1.1.19.1.1.24
Is link part of multicast tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceXhInt 1.3.6.1.4.1.251.1.1.19.1.1.25
XH Interface for Link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), point-to-point(2), uni-root(3), bi-root(4), uni-rt-and-leaf(5), uni-leaf(6), bi-leaf(7), unknown(8)  

ceStatTable 1.3.6.1.4.1.251.1.1.19.2
status information about the dv2CE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CeStatEntry

ceStatEntry 1.3.6.1.4.1.251.1.1.19.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CeStatEntry  

ceStatPortNo 1.3.6.1.4.1.251.1.1.19.2.1.1
Link Number for Table Entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

ceStatReset 1.3.6.1.4.1.251.1.1.19.2.1.2
Clear Statistics for Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceStatTxState 1.3.6.1.4.1.251.1.1.19.2.1.3
Indicates if data is being received and segmented
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), fifostart(3), wideband(4), fifokick(5), narrowband(6), operating(7)  

ceStatRxState 1.3.6.1.4.1.251.1.1.19.2.1.4
Indicates if data being reassembled and transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), ais(2), operating(3)  

ceTxCnt 1.3.6.1.4.1.251.1.1.19.2.1.5
Count of Cells transmitted from switch fabric
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceRxCnt 1.3.6.1.4.1.251.1.1.19.2.1.6
Count of Cells received into switch fabric
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceOflCnt 1.3.6.1.4.1.251.1.1.19.2.1.7
Count of 1S intervals during which RX FIFO overflowed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceUflCnt 1.3.6.1.4.1.251.1.1.19.2.1.8
Count of 1S intervals during which RX FIFO underflowed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceDisCnt 1.3.6.1.4.1.251.1.1.19.2.1.9
Count of 1S intervals during which cells were discarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceInvCnt 1.3.6.1.4.1.251.1.1.19.2.1.10
Count of 1S intervals during which cells were invented
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceResCnt 1.3.6.1.4.1.251.1.1.19.2.1.11
Count of 1S intervals during which AAL1 resync occurred
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ceFifoLvlCnt 1.3.6.1.4.1.251.1.1.19.2.1.12
Number of Cells currently in FIFO
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cePriVal 1.3.6.1.4.1.251.1.1.19.21
Primary Clock Valid
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceSecVal 1.3.6.1.4.1.251.1.1.19.22
Secondary Clock Valid
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceClkSel 1.3.6.1.4.1.251.1.1.19.23
Clock Select
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

ceClkInp 1.3.6.1.4.1.251.1.1.19.24
Is there clock input
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ceStr3 1.3.6.1.4.1.251.1.1.19.25
Is there STR3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

veTable 1.3.6.1.4.1.251.1.1.20.1
Configuration Table for dv2VE Links
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VeEntry

veEntry 1.3.6.1.4.1.251.1.1.20.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VeEntry  

veLinkNo 1.3.6.1.4.1.251.1.1.20.1.1.1
Link Number for Table Entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

veEnable 1.3.6.1.4.1.251.1.1.20.1.1.2
Setting to yes(1) enables the Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2), restart(3)  

veMode 1.3.6.1.4.1.251.1.1.20.1.1.3
Service Clock Recovery Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER video(4)  

vePriority 1.3.6.1.4.1.251.1.1.20.1.1.4
Set to high for normal CBR operation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(1), low(2)  

vePvcValid 1.3.6.1.4.1.251.1.1.20.1.1.5
Indicates if valid PVC exists for Link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

veDstSlot 1.3.6.1.4.1.251.1.1.20.1.1.6
Destination Slot for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


veDstVpi 1.3.6.1.4.1.251.1.1.20.1.1.8
Destination VPI for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

veDstVci 1.3.6.1.4.1.251.1.1.20.1.1.9
Destination VCI for PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

veCDV 1.3.6.1.4.1.251.1.1.20.1.1.10
Cell Delay Variation Tolerance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

veCDVMax 1.3.6.1.4.1.251.1.1.20.1.1.11
Cell Delay Variation Tolerance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..62  

veMulticast 1.3.6.1.4.1.251.1.1.20.1.1.24
Is link part of multicast tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

veXhInt 1.3.6.1.4.1.251.1.1.20.1.1.25
XH Interface for Link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), point-to-point(2), uni-root(3), bi-root(4), uni-rt-and-leaf(5), uni-leaf(6), bi-leaf(7), unknown(8)  

veStatTable 1.3.6.1.4.1.251.1.1.20.2
status information about the dv2VE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VeStatEntry

veStatEntry 1.3.6.1.4.1.251.1.1.20.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VeStatEntry  

veStatPortNo 1.3.6.1.4.1.251.1.1.20.2.1.1
Link Number for Table Entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

veStatReset 1.3.6.1.4.1.251.1.1.20.2.1.2
Clear Statistics for Link
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

veStatTxState 1.3.6.1.4.1.251.1.1.20.2.1.3
Indicates if data is being received and segmented
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), fifostart(3), wideband(4), fifokick(5), narrowband(6), operating(7)  

veStatRxState 1.3.6.1.4.1.251.1.1.20.2.1.4
Indicates if data being reassembled and transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), ais(2), operating(3)  

veTxCnt 1.3.6.1.4.1.251.1.1.20.2.1.5
Count of Cells transmitted from switch fabric
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veRxCnt 1.3.6.1.4.1.251.1.1.20.2.1.6
Count of Cells received into switch fabric
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veOflCnt 1.3.6.1.4.1.251.1.1.20.2.1.7
Count of 1S intervals during which RX FIFO overflowed or underflowed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veUflCnt 1.3.6.1.4.1.251.1.1.20.2.1.8
Count of 1S intervals during which RX FIFO underflowed
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veDisCnt 1.3.6.1.4.1.251.1.1.20.2.1.9
Count of 1S intervals during which cells were discarded
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veInvCnt 1.3.6.1.4.1.251.1.1.20.2.1.10
Count of 1S intervals during which cells were invented
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veResCnt 1.3.6.1.4.1.251.1.1.20.2.1.11
Count of 1S intervals during which AAL1 resync occurred
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

veFifoLvlCnt 1.3.6.1.4.1.251.1.1.20.2.1.12
Number of Cells currently in FIFO
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

jpegSlipIp 1.3.6.1.4.1.251.1.1.22.1
IP address of SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

jpegSlipMask 1.3.6.1.4.1.251.1.1.22.2
Mask for SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

jpegSlipRemoteIp 1.3.6.1.4.1.251.1.1.22.3
IP address of remote end of SLIP line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

jpegSlipSpeed 1.3.6.1.4.1.251.1.1.22.4
Baud rate of SLIP serial line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5)  

limSysState 1.3.6.1.4.1.251.1.1.23.1
M-JPEG LIM System State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), idle(2), start(3), working(4), terminate(5), fault(6)  

limSysFault 1.3.6.1.4.1.251.1.1.23.2
M-JPEG LIM Hardware Fault - front panel lamp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

limSysCompErr 1.3.6.1.4.1.251.1.1.23.3
M-JPEG LIM Compression Error - front panel lamp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

limSysDecompErr 1.3.6.1.4.1.251.1.1.23.4
M-JPEG LIM Decompression Error - front panel lamp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

limSysVideoIn 1.3.6.1.4.1.251.1.1.23.5
M-JPEG LIM Video Input Present - front panel lamp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

limSysVideoOut 1.3.6.1.4.1.251.1.1.23.6
M-JPEG LIM Video Output Active - front panel lamp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

limSysStartMode 1.3.6.1.4.1.251.1.1.23.30
M-JPEG LIM Default Startup mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), force-init(2)  

sendFileSel 1.3.6.1.4.1.251.1.1.34.1
File to send
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), vjlim-cod(2), vjlca-cod(3)  

jpegCurrentFile 1.3.6.1.4.1.251.1.1.34.2
File being sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), vjlim-cod(2), vjlca-cod(3)  

sendFileStat 1.3.6.1.4.1.251.1.1.34.3
Status of file send
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7)  

sendFileBytes 1.3.6.1.4.1.251.1.1.34.4
Bytes sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

jpegReset 1.3.6.1.4.1.251.1.1.34.20
Hard/Soft Reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), reset(2)  

jpegSaveCfg 1.3.6.1.4.1.251.1.1.34.21
Save Configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

jpegLoadCfg 1.3.6.1.4.1.251.1.1.34.22
Load Configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

jpegSWRev 1.3.6.1.4.1.251.1.1.34.40
JPEG Code Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vidInJpeg 1.3.6.1.4.1.251.1.1.24.1
M-JPEG LIM Video Input JPEG mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(2)  

vidInRate 1.3.6.1.4.1.251.1.1.24.2
M-JPEG LIM Video Input Channel Bit Rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mbps25(1), mbps20(2), mbps15(3), mbps10(4), mbps5(5)  

vidInProvMode 1.3.6.1.4.1.251.1.1.24.3
M-JPEG LIM Video Input Provisioning Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

vidInFrameRate 1.3.6.1.4.1.251.1.1.24.4
M-JPEG LIM Video Input Frame Rate
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER full(1)  

vidInWindowSize 1.3.6.1.4.1.251.1.1.24.5
M-JPEG LIM Video Input Window size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER full-screen(1), constrained(2)  

vidInQuanFactor 1.3.6.1.4.1.251.1.1.24.6
M-JPEG LIM Video Input Quantization factor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..100  

vidInTransMode 1.3.6.1.4.1.251.1.1.24.7
M-JPEG LIM Video Input Transmit Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), capped-vbr(2)  

vidInStand 1.3.6.1.4.1.251.1.1.24.8
M-JPEG LIM Video Input Standard
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ntsc(1), pal(2)  

vidInVcrMode 1.3.6.1.4.1.251.1.1.24.9
M-JPEG LIM Video Input VCR mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidInAnLpbk 1.3.6.1.4.1.251.1.1.24.10
M-JPEG LIM Video Input Analog Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidInTest 1.3.6.1.4.1.251.1.1.24.11
M-JPEG LIM Video Input Test Pattern
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidInState 1.3.6.1.4.1.251.1.1.26.1
M-JPEG LIM Video Input State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), idle(2), start(3), working(4), terminate(5), fault(6)  

vidInPres 1.3.6.1.4.1.251.1.1.26.2
M-JPEG LIM Video Input Present Indicator
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidInCurQFactor 1.3.6.1.4.1.251.1.1.26.3
M-JPEG LIM Video Input Current Quality Factor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidInCurFrameRate 1.3.6.1.4.1.251.1.1.26.4
M-JPEG LIM Video Input Current Frame Rate
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidInAvgBitRate 1.3.6.1.4.1.251.1.1.26.5
M-JPEG LIM Video Input Average Bitrate (Mpbs)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidInPeakBitRate 1.3.6.1.4.1.251.1.1.26.6
M-JPEG LIM Video Input Peak Bitrate (Mbps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidInSubSample 1.3.6.1.4.1.251.1.1.26.7
M-JPEG LIM Video Input Field Subsample Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidInCompCnt 1.3.6.1.4.1.251.1.1.26.8
M-JPEG LIM Video Input Compressed Packet Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInSkipCnt 1.3.6.1.4.1.251.1.1.26.9
M-JPEG LIM Video Input Skipped Packet Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInBuffOvf 1.3.6.1.4.1.251.1.1.26.10
M-JPEG LIM Video Input Buffer Controller Overflow Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInImageErr 1.3.6.1.4.1.251.1.1.26.11
M-JPEG LIM Video Input JPEG Chip FIFO Overflow
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInFldSynErr 1.3.6.1.4.1.251.1.1.26.12
M-JPEG LIM Video Input Field Synchronization Errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInCompErr 1.3.6.1.4.1.251.1.1.26.13
M-JPEG LIM Video Input Compression Errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidInBufLevel 1.3.6.1.4.1.251.1.1.26.14
M-JPEG LIM Video Input Buffer Fill Level (%)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidInFailReason 1.3.6.1.4.1.251.1.1.26.15
M-JPEG LIM Video Input Fail Reason
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ccube(2), timeout(3), channel(4), xilinx(5), badparms(6), algorithm(7)  

vidOutJpeg 1.3.6.1.4.1.251.1.1.25.1
M-JPEG LIM Video Output JPEG Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(2)  

vidOutStand 1.3.6.1.4.1.251.1.1.25.2
M-JPEG LIM Video Output Standard
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ntsc(1), pal(2), auto-sel(3)  

vidOutSource 1.3.6.1.4.1.251.1.1.25.3
M-JPEG LIM Video Output Timing Source
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER genlock(1), through(2), free(3)  

vidOutUnLpb 1.3.6.1.4.1.251.1.1.25.4
M-JPEG LIM Video Output Uncompressed Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidOutIdleSrc 1.3.6.1.4.1.251.1.1.25.5
M-JPEG LIM Video Output Idle Source
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER black(1), color(2)  

vidOutChnlLpbk 1.3.6.1.4.1.251.1.1.25.6
M-JPEG LIM Video Output Channel Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidOutState 1.3.6.1.4.1.251.1.1.27.1
M-JPEG LIM Video Output state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), idle(2), start(3), working(4), terminate(5), fault(6)  

vidOutRate 1.3.6.1.4.1.251.1.1.27.2
M-JPEG LIM Video Output Bitrate (Mbps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutFrameRate 1.3.6.1.4.1.251.1.1.27.3
M-JPEG LIM Video Output Frame Rate
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutWindowWidth 1.3.6.1.4.1.251.1.1.27.4
M-JPEG LIM Video Output Window Width
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutWindowHeight 1.3.6.1.4.1.251.1.1.27.5
M-JPEG LIM Video Output Window Height
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutChnlLock 1.3.6.1.4.1.251.1.1.27.6
M-JPEG LIM Video Output Channel Lock Indicator
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

vidOutPackets 1.3.6.1.4.1.251.1.1.27.7
M-JPEG LIM Video Output Packets Received Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutPlayed 1.3.6.1.4.1.251.1.1.27.8
M-JPEG LIM Video Output Packets Played Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutSkipped 1.3.6.1.4.1.251.1.1.27.9
M-JPEG LIM Video Output Skipped Packet Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutChnlErr 1.3.6.1.4.1.251.1.1.27.10
M-JPEG LIM Video Output Channel Error Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutBuffOvf 1.3.6.1.4.1.251.1.1.27.11
M-JPEG LIM Video Output Buffer Controller Overflow Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutImageErr 1.3.6.1.4.1.251.1.1.27.12
M-JPEG LIM Video Output JPEG Chip Error Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutSeqnoErr 1.3.6.1.4.1.251.1.1.27.13
M-JPEG LIM Video Output Packet Sequence Number Error Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidOutCurrQFactor 1.3.6.1.4.1.251.1.1.27.14
M-JPEG LIM Video Output Current JPEG Quantization Factor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutStdStat 1.3.6.1.4.1.251.1.1.27.15
M-JPEG LIM Video Output Standard Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ntsc(1), pal(2)  

vidOutBuffLevel 1.3.6.1.4.1.251.1.1.27.16
M-JPEG LIM Video Output Buffer Fill Level (%)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutPktsInBuff 1.3.6.1.4.1.251.1.1.27.17
M-JPEG LIM Video Output Packets in Buffer
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vidOutFailReason 1.3.6.1.4.1.251.1.1.27.18
M-JPEG LIM Video Output Fail Reason
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ccube(2), timeout(3), channel(4), xilinx(5), badparms(6), algorithm(7)  

vidOutSrcSts 1.3.6.1.4.1.251.1.1.27.19
M-JPEG LIM Video Output Timing Source Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER genlock(1), through(2), free(3)  

audInLoopBack 1.3.6.1.4.1.251.1.1.28.1
M-JPEG LIM Audio Input LoopBack Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

audOutMute 1.3.6.1.4.1.251.1.1.29.1
M-JPEG LIM Audio Output Mute Control
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

audOutDigLpbk 1.3.6.1.4.1.251.1.1.29.2
M-JPEG LIM Audio Digital Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

audOutLock 1.3.6.1.4.1.251.1.1.31.1
M-JPEG LIM Audio Output Channel Lock Indicator
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

audOutMuteStat 1.3.6.1.4.1.251.1.1.31.2
M-JPEG LIM Audio Output Mute Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

dataIp 1.3.6.1.4.1.251.1.1.32.1
IP address of Data Channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dataMask 1.3.6.1.4.1.251.1.1.32.2
Network Mask for Data Channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dataRemoteIp 1.3.6.1.4.1.251.1.1.32.3
IP address of remote end of Data Channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

limHostRev 1.3.6.1.4.1.251.1.1.42.1
Host S/W Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

limBootRev 1.3.6.1.4.1.251.1.1.42.2
Boot S/W Revision
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

limHwRev 1.3.6.1.4.1.251.1.1.42.3
Hardware Architecture
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

limAction 1.3.6.1.4.1.251.1.1.42.4
LIM action
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), reset(2), test(3), mtce(4)  

limState 1.3.6.1.4.1.251.1.1.42.5
LIM state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10)  

limFault 1.3.6.1.4.1.251.1.1.42.6
LIM Fault LED
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

limFaultReason 1.3.6.1.4.1.251.1.1.42.7
LIM Fault Reason
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), bad-rev(2), hw-fault(3), memory(4), fileio(5), codec-section(6), sw-error(7)  

limCodec0 1.3.6.1.4.1.251.1.1.42.8
H.320 Codec 0 Active LED
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

limCodec1 1.3.6.1.4.1.251.1.1.42.9
H.320 Codec 1 Active LED
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

limSCmgmt 1.3.6.1.4.1.251.1.1.42.10
Slot Controller Mgmt Link Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

limSCmgmtData 1.3.6.1.4.1.251.1.1.42.11
Slot Controller Mgmt Information Data State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7)  

limSCfileXferReq 1.3.6.1.4.1.251.1.1.42.12
Slot Controller Mgmt File Transfer Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), vh320-cod(2), vhdev-cod(3)  

limSCfileXferStat 1.3.6.1.4.1.251.1.1.42.13
Slot Controller Mgmt File Transfer State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), start(2), continue(3), end(4), ack(5), aborted(6), error(7)  

limSCbytes 1.3.6.1.4.1.251.1.1.42.14
Slot Controller Mgmt File Transfer Byte Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctrlTable 1.3.6.1.4.1.251.1.1.43.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtrlEntry

ctrlEntry 1.3.6.1.4.1.251.1.1.43.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CtrlEntry  

ctrlIndex 1.3.6.1.4.1.251.1.1.43.1.1.1
Codec Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

ctrlCodecType 1.3.6.1.4.1.251.1.1.43.1.1.2
Codec Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER h320(1)  

ctrlCodecAction 1.3.6.1.4.1.251.1.1.43.1.1.3
Codec Action
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), reset(2), test(3), mtce(4)  

ctrlCodecReq 1.3.6.1.4.1.251.1.1.43.1.1.4
Codec Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connect(1), disconnect(2)  

ctrlCallType 1.3.6.1.4.1.251.1.1.43.1.1.5
Codec Call Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER h0(1)  

ctrlCodecSta 1.3.6.1.4.1.251.1.1.43.1.1.6
Codec Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10)  

ctrlChnlLpbk 1.3.6.1.4.1.251.1.1.43.1.1.7
Codec Channel Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), to-other(2), to-self(3)  

ctrlFraming 1.3.6.1.4.1.251.1.1.43.1.1.8
Codec H.221 Framing Detected
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ctrlChnlStat 1.3.6.1.4.1.251.1.1.43.1.1.9
Codec Channel Link Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), idle(2), up(3), loopback(4)  

ctrlFaultReason 1.3.6.1.4.1.251.1.1.43.1.1.10
Codec Fault Reason
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), host(2), video(3), audio(4), data(5), fileio(6), mem(7), h221(8), h242(9), tdm(10)  

vidTable 1.3.6.1.4.1.251.1.1.43.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VidEntry

vidEntry 1.3.6.1.4.1.251.1.1.43.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VidEntry  

vidIndex 1.3.6.1.4.1.251.1.1.43.2.1.1
VH320 Codec Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

vidStandard 1.3.6.1.4.1.251.1.1.43.2.1.2
VH320 Analog Video I/O Standard
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ntsc(1), pal(2)  

vidTxVidReq 1.3.6.1.4.1.251.1.1.43.2.1.3
VH320 Transmit Video Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), freeze(2), mute(3)  

vidRxVidReq 1.3.6.1.4.1.251.1.1.43.2.1.4
VH320 Display Video Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), freeze(2), mute(3)  

vidViewPip 1.3.6.1.4.1.251.1.1.43.2.1.5
VH320 View Self Picture in Picture
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

vidCompQual 1.3.6.1.4.1.251.1.1.43.2.1.6
VH320 Compression Quality
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER best-picture(1), best-motion(2)  

vidDigLpbk 1.3.6.1.4.1.251.1.1.43.2.1.7
VH320 Digital Loopback
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

vidEncFrameCount 1.3.6.1.4.1.251.1.1.43.2.1.8
VH320 Video Encoded Frame Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidDecFrameCount 1.3.6.1.4.1.251.1.1.43.2.1.9
VH320 Video Decoded Frame Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vidState 1.3.6.1.4.1.251.1.1.43.2.1.10
VH320 Video State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), diag(2), idle(3), start(4), working(5), terminate(6), fault(7)  

vidInPresent 1.3.6.1.4.1.251.1.1.43.2.1.11
VH320 Video Input Present
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

vidEncBitRate 1.3.6.1.4.1.251.1.1.43.2.1.12
VH320 Encoded Bitrate (bps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

audTable 1.3.6.1.4.1.251.1.1.43.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AudEntry

audEntry 1.3.6.1.4.1.251.1.1.43.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AudEntry  

audIndex 1.3.6.1.4.1.251.1.1.43.3.1.1
VH320 Codec Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

audState 1.3.6.1.4.1.251.1.1.43.3.1.2
VH320 Audio State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER init(1), testing(2), idle(3), start(4), working(5), terminate(6), fault(7), mtce(8), loading(9), await-framing(10)  

audPrefMode 1.3.6.1.4.1.251.1.1.43.3.1.3
VH320 Audio Preferred Coding Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER u-law(1), a-law(2), g722(3), g728(4)  

audCommMode 1.3.6.1.4.1.251.1.1.43.3.1.4
VH320 Audio Common Coding Mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER u-law(1), a-law(2), g722(3), g728(4)  

audBitRate 1.3.6.1.4.1.251.1.1.43.3.1.5
VH320 Audio Bit Rate (bps)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

audMuteInReq 1.3.6.1.4.1.251.1.1.43.3.1.6
VH320 Audio Mute Input Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

audMuteOutReq 1.3.6.1.4.1.251.1.1.43.3.1.7
VH320 Audio Mute Output Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

audMuteOutStat 1.3.6.1.4.1.251.1.1.43.3.1.8
VH320 Audio Mute Output Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), auto(3)  

audLpbk 1.3.6.1.4.1.251.1.1.43.3.1.9
VH320 Audio Loopback Request
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), analog-in(2), digital-in(3), compress-in(4), analog-out(5), digital-out(6), compress-out(7)  

audInVol 1.3.6.1.4.1.251.1.1.43.3.1.10
VH320 Audio Input Volume
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

audOutVol 1.3.6.1.4.1.251.1.1.43.3.1.11
VH320 Audio Output Volume
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

audInDelay 1.3.6.1.4.1.251.1.1.43.3.1.12
VH320 Audio Input Delay Request (ms)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

audOutDelay 1.3.6.1.4.1.251.1.1.43.3.1.13
VH320 Audio Output Delay Status (ms)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

audFaultReason 1.3.6.1.4.1.251.1.1.43.3.1.14
VH320 Audio Fault Reason
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), mem(2), self-test(3), download(4), loopback(5), dsp(6)  

dataTable 1.3.6.1.4.1.251.1.1.43.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DataEntry

dataEntry 1.3.6.1.4.1.251.1.1.43.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DataEntry  

dataIndex 1.3.6.1.4.1.251.1.1.43.4.1.1
VH320 Codec Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

dataChnlType 1.3.6.1.4.1.251.1.1.43.4.1.2
Data Channel Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lsd(1), hsd(2), mlp(3), hmlp(4), none(5)  

dataPortSpeed 1.3.6.1.4.1.251.1.1.43.4.1.3
Data Port Speed (bps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER baud-2400(1), baud-9600(2), baud-19200(3), baud-38400(4)  

dataPortProt 1.3.6.1.4.1.251.1.1.43.4.1.4
Data Port Protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER async(1), hdlc(2)  

dataHDLCcheck 1.3.6.1.4.1.251.1.1.43.4.1.5
HDLC Check CRC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

dataChnlStat 1.3.6.1.4.1.251.1.1.43.4.1.6
Data Channel Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

dataBytesRcvd 1.3.6.1.4.1.251.1.1.43.4.1.7
Data Channel Bytes Received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dataBytesSent 1.3.6.1.4.1.251.1.1.43.4.1.8
Data Channel Bytes Sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dataResetStat 1.3.6.1.4.1.251.1.1.43.4.1.9
Data Channel Reset Statistics
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mgmtTable 1.3.6.1.4.1.251.1.1.44.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MgmtEntry

mgmtEntry 1.3.6.1.4.1.251.1.1.44.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MgmtEntry  

mgmtIndex 1.3.6.1.4.1.251.1.1.44.1.1.1
VH320 Management Port Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

mgmtDescr 1.3.6.1.4.1.251.1.1.44.1.1.2
VH320 Management Port Descriptor
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mgmtPortProt 1.3.6.1.4.1.251.1.1.44.1.1.3
Management Port Protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER async(1), slip(2)  

mgmtPortSpeed 1.3.6.1.4.1.251.1.1.44.1.1.4
Management Port Speed (bps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER serial-200(1), baud-2400(2), baud-9600(3), baud-19200(4), baud-38400(5)  

mgmtPortAddress 1.3.6.1.4.1.251.1.1.44.1.1.5
Management Port Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mgmtAddressMask 1.3.6.1.4.1.251.1.1.44.1.1.6
Management Port Address Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mgmtRemoteAddress 1.3.6.1.4.1.251.1.1.44.1.1.7
Management Remote Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mgmtPortStat 1.3.6.1.4.1.251.1.1.44.1.1.8
Management Port Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mgmtBytesRcvd 1.3.6.1.4.1.251.1.1.44.1.1.9
Management Bytes Received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mgmtBytesSent 1.3.6.1.4.1.251.1.1.44.1.1.10
Management Bytes Sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mgmtResetStat 1.3.6.1.4.1.251.1.1.44.1.1.11
Management Reset Statistics
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oamTable 1.3.6.1.4.1.251.1.1.36.1
This table is used for per-port OAM configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OamEntry

oamEntry 1.3.6.1.4.1.251.1.1.36.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OamEntry  

oamLinkNo 1.3.6.1.4.1.251.1.1.36.1.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

oamSegEndPoint 1.3.6.1.4.1.251.1.1.36.1.1.2
Set to yes(1) to configure the link as segment end point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

oamVcEndPoint 1.3.6.1.4.1.251.1.1.36.1.1.3
Set to yes(1) to configure the link as connection end point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

oamAisRdiGeneration 1.3.6.1.4.1.251.1.1.36.1.1.4
Set to yes(1) to generate AIS/RDI up on physical failure.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

oamLastRxType 1.3.6.1.4.1.251.1.1.36.1.1.5
Type of the last received OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ais(1), rdi(2), loopback(3), continuity-check(4), performance-monitoring(5), unsupported(6), none(10)  

oamLastRxVpi 1.3.6.1.4.1.251.1.1.36.1.1.6
VPI value of the last received OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

oamLastRxVci 1.3.6.1.4.1.251.1.1.36.1.1.7
VCI value of the last received OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

oamRxCount 1.3.6.1.4.1.251.1.1.36.1.1.8
Sum of received OAM cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oamLastTxType 1.3.6.1.4.1.251.1.1.36.1.1.9
Type of the last transmitted OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ais(1), rdi(2), loopback(3), continuity-check(4), performance-monitoring(5), unsupported(6), none(10)  

oamLastTxVpi 1.3.6.1.4.1.251.1.1.36.1.1.10
VPI value of the last transmitted OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

oamLastTxVci 1.3.6.1.4.1.251.1.1.36.1.1.11
VCI value of the last transmitted OAM cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

oamTxCount 1.3.6.1.4.1.251.1.1.36.1.1.12
Sum of transmitted OAM cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

oamClearStats 1.3.6.1.4.1.251.1.1.36.1.1.13
Set to yes(2) to clear OAM Tx and Rx Statistics.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oamLoopbackTable 1.3.6.1.4.1.251.1.1.36.2
This table is used to configure and control loopback test. Change Test Status to Start Test(1) to initiate loopback test.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OamLoopbackEntry

oamLoopbackEntry 1.3.6.1.4.1.251.1.1.36.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OamLoopbackEntry  

oamLoopbackLinkNo 1.3.6.1.4.1.251.1.1.36.2.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

oamLoopbackVpi 1.3.6.1.4.1.251.1.1.36.2.1.2
VPI value for the loopback cells to send.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

oamLoopbackVci 1.3.6.1.4.1.251.1.1.36.2.1.3
VCI value for the loopback cells to send.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

oamLoopbackSpan 1.3.6.1.4.1.251.1.1.36.2.1.4
Flow span for the loopback cells to send.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segment(4), end-to-end(5), location-id(6)  

oamLoopbackMaxNumCells 1.3.6.1.4.1.251.1.1.36.2.1.5
Maximum number of loopback cells to send.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

oamLoopbackNumCellsSent 1.3.6.1.4.1.251.1.1.36.2.1.6
Number of loopback cells sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..20  

oamLoopbackTimeOut 1.3.6.1.4.1.251.1.1.36.2.1.7
Number of seconds to wait for loopback cells to return.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

oamLoopbackActive 1.3.6.1.4.1.251.1.1.36.2.1.8
Change to Start Test to run loopback test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start-test(1), complete(2), idle(3), under-test(4)  

oamLoopbackResult 1.3.6.1.4.1.251.1.1.36.2.1.9
Loopback test result.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), physical-loopback-detected(3), unknown(4), vpi-range-error(5), vp-is-invalid(6), vci-range-error(7), vci-and-span-mismatch(8), vpc-not-established(9), vcc-not-established(10)  

oamLoopbackLocId 1.3.6.1.4.1.251.1.1.36.2.1.10
Location Node ID for loopback point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

oamDisable 1.3.6.1.4.1.251.1.1.36.3
yes(2) will disable the oam for entire slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oamVcaTable 1.3.6.1.4.1.251.1.1.36.4
This table is used for per-port OAM configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OamVcaEntry

oamVcaEntry 1.3.6.1.4.1.251.1.1.36.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OamVcaEntry  

oamVcaVpi 1.3.6.1.4.1.251.1.1.36.4.1.1
The VPI for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

oamVcaVci 1.3.6.1.4.1.251.1.1.36.4.1.2
The VCI for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

oamVcaConnectionType 1.3.6.1.4.1.251.1.1.36.4.1.3
Set End point configuration on hardware per VPC/VCC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connection-point(1), segment-endpoint(2), end-to-end-endpoint(3), pass-thru(4)  

oamVcaVpcEndPoint 1.3.6.1.4.1.251.1.1.36.4.1.4
Set yes(1) to configure the VC to VPC end point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oamVcaAisRdiGeneration 1.3.6.1.4.1.251.1.1.36.4.1.5
AIS/RDI disable or enable with or without traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

oamVcaAisRdiState 1.3.6.1.4.1.251.1.1.36.4.1.6
AIS/RDI state for this VP/VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ais(2), rdi(3)  

oamVcaDefectType 1.3.6.1.4.1.251.1.1.36.4.1.7
AIS/RDI defect type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link-down(2), loss-of-continuity(3), unknown(4)  

oamVcaDefectNode 1.3.6.1.4.1.251.1.1.36.4.1.8
AIS/RDI location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

oamVcaDefectSlot 1.3.6.1.4.1.251.1.1.36.4.1.9
AIS/RDI location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


oamVcaTrapEnable 1.3.6.1.4.1.251.1.1.36.4.1.11
Set enable to generate trap when AIS/RDI received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

oamVcaCC 1.3.6.1.4.1.251.1.1.36.4.1.12
Activate segment or end to end Continuity Checks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-bidir-seg-cell(6), act-bidir-ee-cell(7), act-source-seg-manual(8), act-source-ee-manual(9), act-sink-seg-manual(10), act-sink-ee-manual(11), act-bidir-seg-manual(12), act-bidir-ee-manual(13)  

oamVcaCCState 1.3.6.1.4.1.251.1.1.36.4.1.13
Continuity Check state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7)  

oamVcaPM 1.3.6.1.4.1.251.1.1.36.4.1.14
Activate segment or end to end Performance Monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-source-seg-manual(6), act-source-ee-manual(7), act-sink-seg-manual(8), act-sink-ee-manual(9)  

oamVcaPMBlockSize 1.3.6.1.4.1.251.1.1.36.4.1.15
Performance Monitoring block size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size128(1), size256(2), size512(3), size1024(4)  

oamVcaPMState 1.3.6.1.4.1.251.1.1.36.4.1.16
Continuity Check state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7)  

oamVcaBkwRptLosCells 1.3.6.1.4.1.251.1.1.36.4.1.17
Backward Reporting loss of cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcaBkwRptMisCells 1.3.6.1.4.1.251.1.1.36.4.1.18
Backward Reporting misinserted cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcaBkwRptBip16 1.3.6.1.4.1.251.1.1.36.4.1.19
Backward Reporting BIP-16 violations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcaBkwRptSevErr 1.3.6.1.4.1.251.1.1.36.4.1.20
Backward Reporting Severly Errored Cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcbTable 1.3.6.1.4.1.251.1.1.36.5
This table is used for per-port OAM configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OamVcbEntry

oamVcbEntry 1.3.6.1.4.1.251.1.1.36.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OamVcbEntry  

oamVcbVpi 1.3.6.1.4.1.251.1.1.36.5.1.1
The VPI for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualPathIdentifier  

oamVcbVci 1.3.6.1.4.1.251.1.1.36.5.1.2
The VCI for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VirtualCircuitIdentifier  

oamVcbConnectionType 1.3.6.1.4.1.251.1.1.36.5.1.3
Set End point configuration on hardware per VPC/VCC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connection-point(1), segment-endpoint(2), end-to-end-endpoint(3), pass-thru(4)  

oamVcbVpcEndPoint 1.3.6.1.4.1.251.1.1.36.5.1.4
Set yes(1) to configure the VC to VPC end point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

oamVcbAisRdiGeneration 1.3.6.1.4.1.251.1.1.36.5.1.5
AIS/RDI disable or enable with or without traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

oamVcbAisRdiState 1.3.6.1.4.1.251.1.1.36.5.1.6
AIS/RDI state for this VP/VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), ais(2), rdi(3)  

oamVcbDefectType 1.3.6.1.4.1.251.1.1.36.5.1.7
AIS/RDI defect type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link-down(2), loss-of-continuity(3), unknown(4)  

oamVcbDefectNode 1.3.6.1.4.1.251.1.1.36.5.1.8
AIS/RDI location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

oamVcbDefectSlot 1.3.6.1.4.1.251.1.1.36.5.1.9
AIS/RDI location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  


oamVcbTrapEnable 1.3.6.1.4.1.251.1.1.36.5.1.11
Set enable to generate trap when AIS/RDI received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

oamVcbCC 1.3.6.1.4.1.251.1.1.36.5.1.12
Activate segment or end to end Continuity Checks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-bidir-seg-cell(6), act-bidir-ee-cell(7), act-source-seg-manual(8), act-source-ee-manual(9), act-sink-seg-manual(10), act-sink-ee-manual(11), act-bidir-seg-manual(12), act-bidir-ee-manual(13)  

oamVcbCCState 1.3.6.1.4.1.251.1.1.36.5.1.13
Continuity Check state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7)  

oamVcbPM 1.3.6.1.4.1.251.1.1.36.5.1.14
Activate segment or end to end Performance Monitoring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), act-source-seg-cell(2), act-source-ee-cell(3), act-sink-seg-cell(4), act-sink-ee-cell(5), act-source-seg-manual(6), act-source-ee-manual(7), act-sink-seg-manual(8), act-sink-ee-manual(9)  

oamVcbPMBlockSize 1.3.6.1.4.1.251.1.1.36.5.1.15
Performance Monitoring block size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size128(1), size256(2), size512(3), size1024(4)  

oamVcbPMState 1.3.6.1.4.1.251.1.1.36.5.1.16
Continuity Check state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-supported(1), ready(2), wait-act-con(3), wait-act-res(4), wait-deact-con(5), active-cell(6), active-manual(7)  

oamVcbBkwRptLosCells 1.3.6.1.4.1.251.1.1.36.5.1.17
Backward Reporting loss of cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcbBkwRptMisCells 1.3.6.1.4.1.251.1.1.36.5.1.18
Backward Reporting misinserted cell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcbBkwRptBip16 1.3.6.1.4.1.251.1.1.36.5.1.19
Backward Reporting BIP-16 violations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oamVcbBkwRptSevErr 1.3.6.1.4.1.251.1.1.36.5.1.20
Backward Reporting Severly Errored Cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lmiTable 1.3.6.1.4.1.251.1.1.37.1
This table is used to control ILMI configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LmiEntry

lmiEntry 1.3.6.1.4.1.251.1.1.37.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LmiEntry  

lmiLinkNo 1.3.6.1.4.1.251.1.1.37.1.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

lmiVpi 1.3.6.1.4.1.251.1.1.37.1.1.2
The VPI used for ILMI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualPathIdentifier  

lmiVci 1.3.6.1.4.1.251.1.1.37.1.1.3
The VCI used for ILMI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VirtualCircuitIdentifier  

lmiType 1.3.6.1.4.1.251.1.1.37.1.1.4
Set to network side (1) to configure the link as network side ILMI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network-side(1), user-side(2)  

lmiState 1.3.6.1.4.1.251.1.1.37.1.1.5
The state of ILMI for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), connecting(2), registered(3), registering(4), deregistering(5), polling(6), disconnecting(7)  

lmiFormat 1.3.6.1.4.1.251.1.1.37.1.1.6
ILMI address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nsap-e-164(1), nsap-dcc(2), nsap-icd(3), non-nsap-e-164(4)  

lmiPrefix 1.3.6.1.4.1.251.1.1.37.1.1.7
Default Network prefix to use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

lmiOnOff 1.3.6.1.4.1.251.1.1.37.1.1.8
Turn on/off ILMI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), re-register(3)  

lmiPollPeriod 1.3.6.1.4.1.251.1.1.37.1.1.9
Period in seconds to send polling request for link management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..10  

lmiNoRspDown 1.3.6.1.4.1.251.1.1.37.1.1.10
Number of failed polls (no response) before declaration of link down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..10  

lmiLinkMgmt 1.3.6.1.4.1.251.1.1.37.1.1.11
Turn on/off link management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(1)  

lmiConnectivity 1.3.6.1.4.1.251.1.1.37.1.1.12
ATM interface status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

lmiPrefixMod 1.3.6.1.4.1.251.1.1.37.1.1.13
Modifiable Network prefix to use. MUST BE 26 DIGITS
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

lmiEsi 1.3.6.1.4.1.251.1.1.37.1.1.14
ESI field to use on User side. MUST BE 12 DIGITS
Status: mandatory Access: read-write
OBJECT-TYPE    
  E164  

lmiNetSideTable 1.3.6.1.4.1.251.1.1.37.2
This table is used to configure and control network side ILMI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LmiNetSideEntry

lmiNetSideEntry 1.3.6.1.4.1.251.1.1.37.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LmiNetSideEntry  

lmiNetSideLinkNo 1.3.6.1.4.1.251.1.1.37.2.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

lmiNetSidePrefixId 1.3.6.1.4.1.251.1.1.37.2.1.2
Network prefix identification number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

lmiNetSidePrefix 1.3.6.1.4.1.251.1.1.37.2.1.3
Network prefix to register or de-register.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

lmiNetSidePrefixStatus 1.3.6.1.4.1.251.1.1.37.2.1.4
Set to register to send the prefix to the user side; set to de-register to remove the prefix from the user side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER start-registration(1), start-deregistration(2), valid(3), invalid(4), registered(5), deregistered(6), time-out-failure(7), unknown(8), not-allowed(9), rejected(10)  

lmiUserSideTable 1.3.6.1.4.1.251.1.1.37.3
This table is used to configure and control user side ILMI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LmiUserSideEntry

lmiUserSideEntry 1.3.6.1.4.1.251.1.1.37.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LmiUserSideEntry  

lmiUserSideLinkNo 1.3.6.1.4.1.251.1.1.37.3.1.1
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

lmiUserSideAddressId 1.3.6.1.4.1.251.1.1.37.3.1.2
The link number for this configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

lmiUserSideAddress 1.3.6.1.4.1.251.1.1.37.3.1.3
ATM address to register or de-register.
Status: mandatory Access: read-only
OBJECT-TYPE    
  E164SUB  

lmiUserSideAddressStatus 1.3.6.1.4.1.251.1.1.37.3.1.4
Set to valid to register the address to the network side; set to invalid to de-register the address from the network side.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER start-registration(1), start-deregistration(2), valid(3), invalid(4), registered(5), deregistered(6), time-out-failure(7), unknown(8), not-allowed(9), rejected(10)  

alarmNodeCrit 1.3.6.1.4.1.251.1.1.38.1
Node Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

alarmNodeMajor 1.3.6.1.4.1.251.1.1.38.2
Node Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

alarmNodeMinor 1.3.6.1.4.1.251.1.1.38.3
Node Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

alarmStatTable 1.3.6.1.4.1.251.1.1.38.4
This table is used for Alarm Handler status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmStatEntry

alarmStatEntry 1.3.6.1.4.1.251.1.1.38.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlarmStatEntry  

alrStatSlotNo 1.3.6.1.4.1.251.1.1.38.4.1.1
Slot Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

slotCritStatus 1.3.6.1.4.1.251.1.1.38.4.1.2
Slot Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

slotMajorStatus 1.3.6.1.4.1.251.1.1.38.4.1.3
Slot Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

slotMinorStatus 1.3.6.1.4.1.251.1.1.38.4.1.4
Slot Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

link0CritStatus 1.3.6.1.4.1.251.1.1.38.4.1.5
Link 0 Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

link0MajorStatus 1.3.6.1.4.1.251.1.1.38.4.1.6
Link 0 Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

link0MinorStatus 1.3.6.1.4.1.251.1.1.38.4.1.7
Link 0 Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

link1CritStatus 1.3.6.1.4.1.251.1.1.38.4.1.8
Link 1 Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

link1MajorStatus 1.3.6.1.4.1.251.1.1.38.4.1.9
Link 1 Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

link1MinorStatus 1.3.6.1.4.1.251.1.1.38.4.1.10
Link 1 Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

link2CritStatus 1.3.6.1.4.1.251.1.1.38.4.1.11
Link 2 Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

link2MajorStatus 1.3.6.1.4.1.251.1.1.38.4.1.12
Link 2 Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

link2MinorStatus 1.3.6.1.4.1.251.1.1.38.4.1.13
Link 2 Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

link3CritStatus 1.3.6.1.4.1.251.1.1.38.4.1.14
Link 3 Critical Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), crit(2), crit-aco(3)  

link3MajorStatus 1.3.6.1.4.1.251.1.1.38.4.1.15
Link 3 Major Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), maj(2), maj-aco(3)  

link3MinorStatus 1.3.6.1.4.1.251.1.1.38.4.1.16
Link 3 Minor Alarm Status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clr(1), min(2), min-aco(3)  

alarmNodeACO 1.3.6.1.4.1.251.1.1.38.5
Node ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

alarmACOTable 1.3.6.1.4.1.251.1.1.38.6
This table is used for the Alarm Handler ACO
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmACOEntry

alarmACOEntry 1.3.6.1.4.1.251.1.1.38.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlarmACOEntry  

alrACOslotNo 1.3.6.1.4.1.251.1.1.38.6.1.1
Slot Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

alrACOslotACO 1.3.6.1.4.1.251.1.1.38.6.1.2
Slot ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

alrACOlink0ACO 1.3.6.1.4.1.251.1.1.38.6.1.3
Link 0 ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

alrACOlink1ACO 1.3.6.1.4.1.251.1.1.38.6.1.4
Link 1 ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

alrACOlink2ACO 1.3.6.1.4.1.251.1.1.38.6.1.5
Link 2 ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

alrACOlink3ACO 1.3.6.1.4.1.251.1.1.38.6.1.6
Link 3 ACO Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

userStatusTable 1.3.6.1.4.1.251.1.1.38.7
This table is used for the User Status Inputs
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatusEntry

userStatusEntry 1.3.6.1.4.1.251.1.1.38.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatusEntry  

userInputNo 1.3.6.1.4.1.251.1.1.38.7.1.1
User Status Input Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

userInputEnable 1.3.6.1.4.1.251.1.1.38.7.1.2
Enable User Status Input
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

userInputTrapEnable 1.3.6.1.4.1.251.1.1.38.7.1.3
Enable User Defined Trap/Event
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

userInputTrapDesc 1.3.6.1.4.1.251.1.1.38.7.1.4
Description string for trap/event
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

userInputActiveState 1.3.6.1.4.1.251.1.1.38.7.1.5
Alarm active state of user input relay switch
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active-closed(1), active-open(2)  

userInputAlrClass 1.3.6.1.4.1.251.1.1.38.7.1.10
Classification of Status/Alarm Input
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), informational(4)  

userInputStatus 1.3.6.1.4.1.251.1.1.38.7.1.11
Current Status of Status/Alarm Input
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), active(2)  

alarmScanFile 1.3.6.1.4.1.251.1.1.38.8
Rescan the alr_class.txt file
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(2), yes(1)  

cacCurrentEbtId 1.3.6.1.4.1.251.1.1.39.1
Current EBT file ID code. cacCurrentEbtId holds the EBT file ID code of the EBT file currently in memory in a verified state. The CAC application is responsible for maintaining the state of this variable. If there is a verified EBT in memory cacCurrentEbtId will still hold the EBT file's ID code even if the CAC is disabled or the CAC version is scr-pcr. If there is no EBT in memory or the verification was unsuccessful then the value of cacCurrentEbtId is zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cacEbtCommand 1.3.6.1.4.1.251.1.1.39.2
EBT file command. This field, normally with the value none, may be set by the manager to: * load-ebt to initiate the loading of a new EBT file into memory. * dump-ebt to initiate the dump of the EBT memory content into flash. * delete-ebt to cause an EBT file to be deleted in the flash. The value of cacEbtCommand will return to none when the EBT file command has been completed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), load-EBT(2), dump-EBT(3), delete-EBT(4)  

cacCommandEbtId 1.3.6.1.4.1.251.1.1.39.3
Command EBT file ID code. cacCommandEbtId is written to by the manager to identify the EBT file in the flash that should be loaded or deleted. When the cacEbtCommand MIB item is set to either load-ebt or delete-ebt, the CAC software attempts to load or delete the EBT file named ebXXXXX.bin from flash, where XXXXX is the value cacCommandEbtId padded to five digits with leading zeros. The value zero (0) is not a valid EBT file ID code and is reserved to indicate that EBT file ID code has not been specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

cacEbtState 1.3.6.1.4.1.251.1.1.39.4
State of the CAC. The state: * uninitialized is an initial MIB value which is never returned to without starting from a new MIB. * initializing indicates the initial part of the CAC boot. * loading indicates that an EBT file is being loaded. * ready indicates that a valid EBT is in memory. In this state the current EBT file ID code shows the ID code of the EBT in memory. * unusable is reached after an unsuccessful load and indicates that the data in the EBT memory block is unusable (in this state current EBT file ID code shows 0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uninitialized(1), initializing(2), loading(3), ready(4), unusable(5)  

cacErrorCode 1.3.6.1.4.1.251.1.1.39.5
Error code. Error codes are produced at certain stages in the CAC application. The interpretation of the error codes is: Terms: 'ebXXXXX.bin' : binary file in flash data structure: EBT_file_template based structure * no-error: no error encountered. * nonexistent-file: the 'ebXXXXX.bin' file not found in the flash, during APEX boot or MIB EBT load request. * bad-file-length: mismatch in file length specified within 'ebXXXXX.bin' and the pre-specified file length. Occurs while loading file into data structures. * copy-corrupted: copying of data from 'ebXXXXX.bin' into the data structure, EBT_file_template did not proceed smoothly and the data structure is now corrupted. * nunused-cbtdwoEBTid: command EBT id not used and current EBT id is 0. The CAC booted without valid EBT values in the data structure. Occurs during boot while loading file into data structures. * nunused-cinvalid: command EBT id not used. The file eb'current EBT id'.bin contains invalid data. Occurs just after the EBT file got loaded into the data structure, when the verification of values in the data structure takes place. * nEBTid-uninit-cstays: command EBT id is 0 and the data structures remain unchanged. Occurs when mib item cacTableload is switched to yes. * ninvalid-cstays: eb'command EBT id'.bin contains invalid data and the data structures remain unchanged. Occurs when mib item cacTableload is switched to yes. * ninvalid-cEBTid-uninit: eb'command EBT id'.bin contains invalid data and the current EBT id is zero. This means that data structure is corrupted. Occurs when mib item cacTableload is switched to yes. * ninvalid-cinvalid: both eb'command EBT id'.bin and eb'current EBT id'.bin contains invalid data. The data structure is corrupted. Occurs when mib item cacTableload is switched to yes. * ninvalid-cnoerror: eb'command EBT id'.bin contains invalid data and the eb'current EBT id'.bin is loaded successfully. Occurs when mib item cacTableload is switched to yes. * link-not-ready: it is a runtime error which states that link is not ready for configuration. * link-not-configuring: it is a runtime error which states that link is not in configuring mode and therefore the recalculation of EBT or scr-pcr sums is not possible. * EBT-not-loaded: it is a runtime error which states that the data structure does not contain valid data. This occurs when the EBT enable mib switch is turned to 'yes' or the cac version mib item is switched to EBT. * class-not-found: this runtime error indicates that during the processing of allocate, deallocate or change functions, a class corresponding to SCR, PCR or MBS was not found. The effective bandwidth used in this situation is the same as a CBR allocation using the attempted connection's PCR. * dump-fs-error: this error indicates that a file system error (e.g. the file system became full) during the EBT file dump function. The dump file was deleted after the file system error was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-error(1), nonexistent-file(2), bad-file-length(3), copy-corrupted(4), nunused-cbtdwoebtid(5), nunused-cinvalid(6), nebtid-uninit-cstays(7), ninvalid-cstays(8), ninvalid-cebtid-uninit(9), ninvalid-cinvalid(10), ninvalid-cnoerror(11), link-not-ready(12), link-not-configuring(13), ebt-not-loaded(14), class-not-found(15), dump-fs-error(16), bad-ebt-command(17), delete-fs-error(18), ebt-id-invalid(19)  

cacPerLinkTable 1.3.6.1.4.1.251.1.1.39.6
This table containing per link data. Contains per link specific data
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CacPerLinkEntry

cacPerLinkEntry 1.3.6.1.4.1.251.1.1.39.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CacPerLinkEntry  

cacLinkNo 1.3.6.1.4.1.251.1.1.39.6.1.1
Link number. cacLinkNo is the index (0..3) to the array of link data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

cacLinkSumE10 1.3.6.1.4.1.251.1.1.39.6.1.2
Running sum of e10. cacSumE10 zero loss effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacLinkSumE1T 1.3.6.1.4.1.251.1.1.39.6.1.3
Running sum of e1T. cacSumE1T tangent effective bandwidth for high priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacLinkObfPvc1 1.3.6.1.4.1.251.1.1.39.6.1.4
Utilization factor for high priority pvc. Utilization factor for PVCs and SPVCs for the high priority queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cacLinkObfSvc1 1.3.6.1.4.1.251.1.1.39.6.1.5
Utilization factor for high priority svc. Utilization factor for SVCs for the high priority queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cacLinkSumE20 1.3.6.1.4.1.251.1.1.39.6.1.6
Running sum of e20. cacSumE20 zero loss effective bandwidth for low priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacLinkSumE2T 1.3.6.1.4.1.251.1.1.39.6.1.7
Running sum of e2T. cacSumE1T zero tangent effective bandwidth for low priority queue. This value is maintained only when the CAC is enabled on the link (cacEnable) and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacLinkObfPvc2 1.3.6.1.4.1.251.1.1.39.6.1.8
Utilization factor for low priority pvc. Utilization factor for PVCs and SPVCs for the low priority queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cacLinkObfSvc2 1.3.6.1.4.1.251.1.1.39.6.1.9
Utilization factor for low priority svc. Utilization factor for SVCs for the low priority queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

cacLinkTotalBwScrPcr 1.3.6.1.4.1.251.1.1.39.6.1.10
total bw allocation on the link by scr-pcr CAC. cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is enabled and when the SCR-PCR CAC is being used. Its value is zero if CAC is disabled or the EBT CAC mode is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacCurrentLinkUsage 1.3.6.1.4.1.251.1.1.39.6.1.11
Current link bandwidth allocation. It is the current indication of bandwidth allocation on a link based on the formula using effective bandwidths
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacMaxLinkUsage 1.3.6.1.4.1.251.1.1.39.6.1.12
Max link bw allocation since last reset or card boot. cacMaxLinkUsage shows the maximum value that cacCurrentLinkUsage has reached since cacMaxLinkUsage was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacLinkReset 1.3.6.1.4.1.251.1.1.39.6.1.13
Reload maximum link usage from current allocation. cacReset resets cacMaxLinkUsage, after the reset cacMaxLinkUsage shows the same value as cacCurrentLinkUsage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cacLinkVersion 1.3.6.1.4.1.251.1.1.39.6.1.14
Use EB CAC or scr-pcr CAC? The per-link variable cacVersion may take on the values * SCR-PCR indicating that the old, pre Rel 4.2 CAC based on SCR and PCR values, is in operation or * EBT indicating that the new CAC based on effective bandwidths is used. cacVersion may be set by the manager. If cacVersion is set to EBT by the manager it will revert to SCR-PCR unless a valid EBT is currently available in memory (in which case cacEbtState==ready and cacCurrentEbtId holds a non-zero value). The cacVersion may also revert to SCR-PCR if, during boot or an EBT load, a valid EBT cannot be established in memory. A change of state in cacVersion will result in recalculatation of EB Sums.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ebt(1), scr-pcr(2)  

cacLinkEnable 1.3.6.1.4.1.251.1.1.39.6.1.15
Enable cac? When cacEnable has the value * yes, then the three CAC service routines are operational as defined, * no, then all connections are accepted regardless of required bandwidths CAC may be enabled or disabled by the manager at any time that the cacLinkState is ready. Enabling CAC will cause recalculatation of EB sums for that link. Disabling CAC will cause the EB sums for the link (also for associated V-SAPs) to be set to zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

cacLinkSignalMode 1.3.6.1.4.1.251.1.1.39.6.1.16
Link signalling mode cacSignallingMode is a read-only variable indicating whether the link is currently in the signalling mode: * single-channel or * multi-channel The value of cacSignallingMode is updated any time a virtual SAP is either associated or disassociated with a physical SAP. Multi-channel mode indicates that at least one virtual SAP is associated with the link's physical SAP. In multi-channel mode the zero-loss effective bandwidths are not used for connection admission control.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER single-channel(1), multi-channel(2)  

cacLinkState 1.3.6.1.4.1.251.1.1.39.6.1.17
State of the Link The cacLinkState variable can take the values: * uninitialised is an initial MIB value which is never returned to without staring from a new MIB. * configuring indicates that the CAC on that link cannot be used at the current time. This indicates that CAC is booting, an EBT is being loaded. This is a transient state that will go to ready or recalculating. * recalculating indicates that the sums for both eb and scr-pcr are cleared and are recalculated for the existing connections. * ready indicates that CAC may be used on that link. The state machine is given in Figure3. Transitions out of the ready state can be caused by a boot, an EBT load or the call back functions on (per link) Enable and Version. Whether the transition from configuring back to ready is direct or via recalculating depends on whether or not there is a need to recalculate the effective bandwidth sums; this depends on several factors that can be derived from the detailed design in Section6.2.4.7. The value of the cacLinkState variable is valid and indicates the current link state of the CAC indepenently of the value of cacEnable, cacVersion and cacEbtState. When cacLinkState is configuring, certain CAC functions are disabled: * Requests to the allocate, deallocate and allocation_change service routines will be rejected without processing. * Requests to the allocation summary routine may produce inconsistent results. When cacLinkState is recalculating, certain CAC functions are disabled: * Requests to allocation_change and deallocate service routines will be rejected without processing. * Requests to the allocation summary routine may produce inconsistent results.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uninitialized(1), configuring(2), recalculating(3), ready(4)  

cacPerSapTable 1.3.6.1.4.1.251.1.1.39.7
This table containing per Sap data. The virtual SAP table in the MIB has 12 entries indexed by cacSapNo in the range (20..31). For each SAP there the table entries are detailed below. These entries are only used when at least one of the link's cacSignallingMode is multi-channel. The association of a virtual SAP to a link is given in the resource table MIB group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CacPerSapEntry

cacPerSapEntry 1.3.6.1.4.1.251.1.1.39.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CacPerSapEntry  

cacSapNo 1.3.6.1.4.1.251.1.1.39.7.1.1
SAP number. cacSapNo is the index (0..11) to the array of sap data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 20..31  

cacSapSumE1T 1.3.6.1.4.1.251.1.1.39.7.1.2
Running sum of e1T. cacSumE1T tangent effective bandwidth for high priority queue These values are maintained only when the CAC is enabled on the link (cacEnable), when the SAP is assigned to a link and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacSapSumE2T 1.3.6.1.4.1.251.1.1.39.7.1.3
Running sum of e2T. cacSumE1T tangent effective bandwidth for low priority queue These values are maintained only when the CAC is enabled on the link (cacEnable), when the SAP is assigned to a link and when the EBT CAC version is being used (cacVersion==EBT) otherwise the values here are zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

cacSapTotalBwScrPcr 1.3.6.1.4.1.251.1.1.39.7.1.4
total bw allocation on the link by scr-pcr CAC. cacTotalBwScrPcr is the total bandwidth allocated to extant connections when the CAC is enabled and when the SCR-PCR CAC is being used. Its value is zero if CAC is disabled or the EBT CAC mode is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacCurrentSapUsage 1.3.6.1.4.1.251.1.1.39.7.1.5
Current SAP bandwidth allocation It is the current indication of bandwidth allocation on a sap based on the formula using effective bandwidths.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacMaxSapUsage 1.3.6.1.4.1.251.1.1.39.7.1.6
Max SAP b/w allocation since last reset or card boot. cacMaxSapUsage shows the maximum value that cacCurrentSapUsage has reached since cacMaxSapUsage was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cacSapReset 1.3.6.1.4.1.251.1.1.39.7.1.7
Reload maximum SAP usage from current allocation cacReset resets cacMaxSapUsage, after the reset cacMaxSapUsage shows the same value as cacCurrentSapUsage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

dv2Message 1
This is used to send an arbitary text string to the NMS.
TRAP-TYPE    

slotChanged 2
This is sent when a slot changes state.
TRAP-TYPE    

linkChanged 3
This is sent when a link changes state.
TRAP-TYPE    

psuChanged 4
This is sent when a power supply changes state.
TRAP-TYPE    

configChanged 5
This is sent when has changed.
TRAP-TYPE    

reset040 22
This is sent when a the master processor is reset by operator
TRAP-TYPE    

badPassword 23
This is sent when a user enters a bad password
TRAP-TYPE    

billingRecFail 26
Could not create billing record
TRAP-TYPE    

clockAlarm 27
Change in system clock alarm state: declare or clear minor/major alarms, describe error and location, includes primary/secondary clock locations and the active clock reference
TRAP-TYPE    

spvcInit 28
Call successfully established
TRAP-TYPE    

spvcFail 29
Call attempt failed
TRAP-TYPE    

spvcCallClr 30
Call cleared after established
TRAP-TYPE    

spvcCallReset 31
Call reset after established
TRAP-TYPE    

spvcRetryExceeded 33
Call attempts exceeded retry limit
TRAP-TYPE    

mainInServ 76
This is sent when the Main Slot 0 Controller goes into service
TRAP-TYPE    

standbyInServ 77
This is sent when the Standby Slot 0 Controller goes into service
TRAP-TYPE    

bill25pstfull 78
This is sent when billing table is 25% full.
TRAP-TYPE    

bill75pstfull 79
This is sent when billing table is 75% full.
TRAP-TYPE    

restart040 80
This is sent when the master processor has been restarted by the 68302 processor.
TRAP-TYPE    

alcTxError 81
This is sent after master processor has been reset due to ALC-87 Transmitter Error.
TRAP-TYPE    

lim-fault 91
Configured LIM type does not match the LIM in slot
TRAP-TYPE    

lim-oper 92
LIM operational
TRAP-TYPE    

psuAbsent 93
PSU Absent detected
TRAP-TYPE    

psuPresent 94
PSU Presence detected
TRAP-TYPE    

switchFabricSwap 95
Switch Fabric Redundant Swap
TRAP-TYPE    

internalReset 106
This is sent after the software has detected an internal error and restarted itself.
TRAP-TYPE    

aal1Fault 107
This is sent when an AAL1 fault has occurred.
TRAP-TYPE    

aal1Clear 108
This is sent when an AAL1 fault has been cleared.
TRAP-TYPE    

ds1LOS 109
Loss of Signal alarm
TRAP-TYPE    

ds1LOF 110
Loss of Frame alarm
TRAP-TYPE    

ds1AIS 111
AIS alarm
TRAP-TYPE    

ds1Yellow 112
Yellow alarm
TRAP-TYPE    

ds1ExBER 113
Excessive Bit Error Rate Alarm
TRAP-TYPE    

ds1v2LOS 114
Loss of Signal alarm
TRAP-TYPE    

ds1v2LOF 115
Loss of Frame alarm
TRAP-TYPE    

ds1v2AIS 116
AIS alarm
TRAP-TYPE    

ds1v2Yellow 117
Yellow alarm
TRAP-TYPE    

ds1v2ExBER 118
Excessive Bit Error Rate Alarm
TRAP-TYPE    

ds3LOS 119
Loss of Signal alarm
TRAP-TYPE    

ds3V2LOS 120
Loss of Signal alarm
TRAP-TYPE    

ds3LOF 121
Loss of Frame alarm
TRAP-TYPE    

ds3AIS 122
AIS alarm
TRAP-TYPE    

ds3Yellow 123
Yellow alarm
TRAP-TYPE    

ds3ExBER 124
Excessive Bit Error Rate Alarm
TRAP-TYPE    

ds3FEFrmrDif 125
Received frame format is different than configured frame format
TRAP-TYPE    

e1LOS 126
Loss of Signal alarm
TRAP-TYPE    

e1LOF 127
Loss of Frame alarm
TRAP-TYPE    

e1AIS 128
AIS alarm
TRAP-TYPE    

e1Yellow 129
Yellow alarm
TRAP-TYPE    

e1ExBER 130
Excessive Bit Error Rate Alarm
TRAP-TYPE    

e3LOS 131
Loss of Signal alarm
TRAP-TYPE    

e3LOF 132
Loss of Frame alarm
TRAP-TYPE    

e3AIS 133
AIS alarm
TRAP-TYPE    

e3Yellow 134
Yellow alarm
TRAP-TYPE    

e3ExBER 135
Excessive Bit Error Rate Alarm
TRAP-TYPE    

locd 136
Loss Of Cell Delineation
TRAP-TYPE    

plcpYellow 137
PLCP yellow alarm
TRAP-TYPE    

plcpLOF 138
PLCP Loss of Frame alarm
TRAP-TYPE    

sdhLOS 139
SONET/SDH Loss of Signal
TRAP-TYPE    

sdhLOF 140
SONET/SDH Loss of Frame
TRAP-TYPE    

sdhLineAIS 141
SONET/SDH Line AIS failure
TRAP-TYPE    

sdhPathAIS 142
SONET/SDH Path AIS failure
TRAP-TYPE    

sdhLOP 143
SONET/SDH Loss of Pointer
TRAP-TYPE    

sdhPLM 144
SONET/SDH Path Label Mismatch
TRAP-TYPE    

sdhLineYellow 145
SONET/SDH Line FERF failure
TRAP-TYPE    

sdhPathYellow 146
SONET/SDH Path Yellow failure
TRAP-TYPE    

sdhExBER 147
SONET/SDH Excessive Bit Error Rate
TRAP-TYPE    

clockActiveRef 148
Current Active Reference
TRAP-TYPE    

outOfResource 149
Link cell rate is not sufficient for established connections
TRAP-TYPE    

hssiLOS 150
HSSI Loss of Signal
TRAP-TYPE    

hssiDTEReady 151
DTE is Ready
TRAP-TYPE    

hssiDCEReady 152
DCE is Ready
TRAP-TYPE    

hssiDTENotReady 153
DTE is not Ready
TRAP-TYPE    

hssiDCENotReady 154
DCE is not Ready
TRAP-TYPE    

userstatus1 155
Tok_String
TRAP-TYPE    

userstatus2 156
Tok_String
TRAP-TYPE    

pntmoper 157
Sent when Primary NTM card operational status changes
TRAP-TYPE    

sntmoper 158
Sent when Secondary NTM card operational status changes
TRAP-TYPE    

pntmoscstatus 159
Sent when Primary NTM card oscillator status changes
TRAP-TYPE    

sntmoscstatus 160
Sent when secondary NTM card oscillator status changes
TRAP-TYPE    

pbitslineok 161
Sent when Primary NTM card BITS line status changes
TRAP-TYPE    

sbitslineok 162
Sent when secondary NTM card BITS line status changes
TRAP-TYPE    

svcHalfConnect 163
SVC half connect detected
TRAP-TYPE    

duplicateIpAddr 164
Sent When a duplicate IP address is detected.
TRAP-TYPE    

svcQsaalReset 165
Sent when SAP is reset
TRAP-TYPE    

svcQsaalUpDown 166
Sent when SAP transitions between Up and Down
TRAP-TYPE    

svcT309Expiry 167
Sent when T309 timer expired and calls exist on a SAP
TRAP-TYPE    

j2LOS 168
Loss of Signal alarm
TRAP-TYPE    

j2LOF 169
Loss of Frame alarm
TRAP-TYPE    

j2AIS 170
AIS alarm
TRAP-TYPE    

j2RAI 171
RAI alarm
TRAP-TYPE    

scfLOS 172
Loss of Signal alarm
TRAP-TYPE    

routeLoadFail 173
def.rtb file load failure
TRAP-TYPE    

dTLLoadFail 174
dtl.bin file load failure
TRAP-TYPE    

redunNotAvail 175
This is sent when the Redundant Slot 0 Controller is not available
TRAP-TYPE    

redunAvail 176
This is sent when the Redundant Slot 0 Controller is available
TRAP-TYPE    

dQ7-error 177
This trap is sent when edos discovers a DQ7 error in flash
TRAP-TYPE    

oamVcaRcvAIS-RDI 178
This trap is generated when an AIS or RDI is received on VCa port
TRAP-TYPE    

oamVcbRcvAIS-RDI 179
This trap is generated when an AIS or RDI is received on VCb port
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor