DSLAM-BACKUP-MIB

File: DSLAM-BACKUP-MIB.mib (13652 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB ATM-TC-MIB PAIRGAIN-COMMON-HD-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE RowStatus
MODULE-COMPLIANCE OBJECT-GROUP InterfaceIndex
ifIndex AtmVpIdentifier AtmVcIdentifier
AtmVorXOperStatus pgainDSLAM

Defined Types

PgBackupPortEntry  
SEQUENCE    
  pgBackupPortAdminStatus INTEGER

PgBackupVpEntry  
SEQUENCE    
  pgBackupVpPrimaryIfIndex InterfaceIndex
  pgBackupVpPrimaryVpi AtmVpIdentifier
  pgBackupVpSecondaryIfIndex InterfaceIndex
  pgBackupVpSecondaryVpi AtmVpIdentifier
  pgBackupVpRowStatus RowStatus
  pgBackupVpPrimaryAdminStatus INTEGER
  pgBackupVpPrimaryOperStatus AtmVorXOperStatus
  pgBackupVpSecondaryOperStatus AtmVorXOperStatus
  pgBackupVpSwitchTimes INTEGER

PgBackupVcEntry  
SEQUENCE    
  pgBackupVcPrimaryIfIndex InterfaceIndex
  pgBackupVcPrimaryVpi AtmVpIdentifier
  pgBackupVcPrimaryVci AtmVcIdentifier
  pgBackupVcSecondaryIfIndex InterfaceIndex
  pgBackupVcSecondaryVpi AtmVpIdentifier
  pgBackupVcSecondaryVci AtmVcIdentifier
  pgBackupVcRowStatus RowStatus
  pgBackupVcPrimaryAdminStatus INTEGER
  pgBackupVcPrimaryOperStatus AtmVorXOperStatus
  pgBackupVcSecondaryOperStatus AtmVorXOperStatus
  pgBackupVcSwitchTimes INTEGER

Defined Values

pgBackupMIB 1.3.6.1.4.1.927.1.9.19
The MIB Module for BACKUP.
MODULE-IDENTITY    

pgBackupObjects 1.3.6.1.4.1.927.1.9.19.1
OBJECT IDENTIFIER    

pgBackupPortTable 1.3.6.1.4.1.927.1.9.19.1.1
This table is used to restore the PVC/PVP connections back from the backup path to the primary one. The number of the entry in this table depends on the number of line card in the system. The entries would be pre-existent. Only the MIB object of pgBackupPortAdminStatus is allowed to set.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgBackupPortEntry

pgBackupPortEntry 1.3.6.1.4.1.927.1.9.19.1.1.1
The entry of the pgBackupPortTable. The ifIndex would be the ATM interface of the line card.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgBackupPortEntry  

pgBackupPortAdminStatus 1.3.6.1.4.1.927.1.9.19.1.1.1.1
This object is used to restore the PVC/PVP connection back from the backup path to the primary path.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

pgBackupVpTable 1.3.6.1.4.1.927.1.9.19.1.2
The Backup VP table. This table is used for PVPs Redirect.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgBackupVpEntry

pgBackupVpEntry 1.3.6.1.4.1.927.1.9.19.1.2.1
The entry of pgBackupVpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgBackupVpEntry  

pgBackupVpPrimaryIfIndex 1.3.6.1.4.1.927.1.9.19.1.2.1.1
The ifIndex value of the ATM interface at line card side for the primary PVP. This value would represent one of the line card in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

pgBackupVpPrimaryVpi 1.3.6.1.4.1.927.1.9.19.1.2.1.2
The VPI value of the primary VPL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

pgBackupVpSecondaryIfIndex 1.3.6.1.4.1.927.1.9.19.1.2.1.3
The ifIndex value of the ATM interface at line card side for the secondary PVP. This value would represent one of the line card in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

pgBackupVpSecondaryVpi 1.3.6.1.4.1.927.1.9.19.1.2.1.4
The VPI value of the secondary VPL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

pgBackupVpRowStatus 1.3.6.1.4.1.927.1.9.19.1.2.1.5
This object is used to create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pgBackupVpPrimaryAdminStatus 1.3.6.1.4.1.927.1.9.19.1.2.1.6
This object is used to restore the PVP back from the secondary PVP to the primary PVP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

pgBackupVpPrimaryOperStatus 1.3.6.1.4.1.927.1.9.19.1.2.1.7
The current operational status of the cross-connect over the primary PVP.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

pgBackupVpSecondaryOperStatus 1.3.6.1.4.1.927.1.9.19.1.2.1.8
The current operational status of the cross-connect over the secondary PVP.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

pgBackupVpSwitchTimes 1.3.6.1.4.1.927.1.9.19.1.2.1.9
The number of times when the PVP is switched from the primary PVP to the secondary PVP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

pgBackupVcTable 1.3.6.1.4.1.927.1.9.19.1.3
The Backup VC table. This table is used for PVCs Redirect.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgBackupVcEntry

pgBackupVcEntry 1.3.6.1.4.1.927.1.9.19.1.3.1
The entry of pgBackupVcTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgBackupVcEntry  

pgBackupVcPrimaryIfIndex 1.3.6.1.4.1.927.1.9.19.1.3.1.1
The ifIndex value of the ATM interface at line card side for the primary PVC. This value would represent one of the line card in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

pgBackupVcPrimaryVpi 1.3.6.1.4.1.927.1.9.19.1.3.1.2
The VPI value of the primary VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

pgBackupVcPrimaryVci 1.3.6.1.4.1.927.1.9.19.1.3.1.3
The VCI value of the primary VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVcIdentifier  

pgBackupVcSecondaryIfIndex 1.3.6.1.4.1.927.1.9.19.1.3.1.4
The ifIndex value of the ATM interface at line card side for the secondary PVC. This value would represent one of the line card in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

pgBackupVcSecondaryVpi 1.3.6.1.4.1.927.1.9.19.1.3.1.5
The VPI value of the secondary VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

pgBackupVcSecondaryVci 1.3.6.1.4.1.927.1.9.19.1.3.1.6
The VCI value of the secondary VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVcIdentifier  

pgBackupVcRowStatus 1.3.6.1.4.1.927.1.9.19.1.3.1.7
This object is used to create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pgBackupVcPrimaryAdminStatus 1.3.6.1.4.1.927.1.9.19.1.3.1.8
This object is used to restore the PVC back from the secondary PVC to the primary PVC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

pgBackupVcPrimaryOperStatus 1.3.6.1.4.1.927.1.9.19.1.3.1.9
The current operational status of the cross-connect over the primary PVC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

pgBackupVcSecondaryOperStatus 1.3.6.1.4.1.927.1.9.19.1.3.1.10
The current operational status of the cross-connect over the secondary PVC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

pgBackupVcSwitchTimes 1.3.6.1.4.1.927.1.9.19.1.3.1.11
The number of times when the PVC is switched from the primary PVC to the secondary PVC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535