DPS-MIB-V38-V2

File: DPS-MIB-V38-V2.mib (25333 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI DPS-MIB-V38

Imported symbols

DisplayString MODULE-IDENTITY NOTIFICATION-TYPE
OBJECT-TYPE Integer32 dpsAlarmControl
tmonXM

Defined Types

TMonV2AlarmEntry  
SEQUENCE    
  tmonV2AIndex Integer32
  tmonV2ASite DisplayString
  tmonV2ADesc DisplayString
  tmonV2AState DisplayString
  tmonV2ASeverity DisplayString
  tmonV2AChgDate DisplayString
  tmonV2AChgTime DisplayString
  tmonV2AAuxDesc DisplayString
  tmonV2ADispDesc DisplayString
  tmonV2APntType Integer32
  tmonV2APort Integer32
  tmonV2AAddress Integer32
  tmonV2ADisplay Integer32
  tmonV2APoint Integer32
  tmonV2AEvent Integer32
  tmonV2AIPAddr DisplayString
  tmonV2ADevDesc DisplayString

DPSrtuV2DispEntry  
SEQUENCE    
  dpsRTUv2Port Integer32
  dpsRTUv2Address Integer32
  dpsRTUv2Display Integer32
  dpsRTUv2DispDesc DisplayString
  dpsRTUv2PntMap DisplayString

DPSrtuV2AlarmEntry  
SEQUENCE    
  dpsRTUv2APort Integer32
  dpsRTUv2AAddress Integer32
  dpsRTUv2ADisplay Integer32
  dpsRTUv2APoint Integer32
  dpsRTUv2APntDesc DisplayString
  dpsRTUv2AState DisplayString

ChannelEntryv2  
SEQUENCE    
  channelNumberv2 Integer32
  enabledv2 Integer32
  descriptionv2 DisplayString
  valuev2 DisplayString
  thresholdsv2 Integer32

Defined Values

tmonV2XM 1.3.6.1.4.1.2682.1.3
Second generation MIB for DPS Telecom products
MODULE-IDENTITY    

tmonV2Ident 1.3.6.1.4.1.2682.1.3.1
OBJECT IDENTIFIER    

tmonV2IdentManufacturer 1.3.6.1.4.1.2682.1.3.1.1
The TMON/XM Unit manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2IdentModel 1.3.6.1.4.1.2682.1.3.1.2
The TMON/XM model designation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2IdentSoftwareVersion 1.3.6.1.4.1.2682.1.3.1.3
The TMON/XM SNMP Agent software version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2AlarmTable 1.3.6.1.4.1.2682.1.3.2
A table of TMonV2 Alarm-specific information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TMonV2AlarmEntry

tmonV2AlarmEntry 1.3.6.1.4.1.2682.1.3.2.1
Information about a particular TMonV2 alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  TMonV2AlarmEntry  

tmonV2AIndex 1.3.6.1.4.1.2682.1.3.2.1.1
Tmon alarm table index (1..NumberOfAlarms).
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2ASite 1.3.6.1.4.1.2682.1.3.2.1.2
The site of the alarm (i.e. Atlanta Hub, Sub-Station H32).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2ADesc 1.3.6.1.4.1.2682.1.3.2.1.3
A user-defined text string associated with the alarm (i.e. South Door, Generator, Power Grid 1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2AState 1.3.6.1.4.1.2682.1.3.2.1.4
The current alarm state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2ASeverity 1.3.6.1.4.1.2682.1.3.2.1.5
The severity of the last alarm event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2AChgDate 1.3.6.1.4.1.2682.1.3.2.1.6
The date (mm/dd/yy) of the last alarm event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2AChgTime 1.3.6.1.4.1.2682.1.3.2.1.7
The time (hh:mm:ss) of the last alarm event.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2AAuxDesc 1.3.6.1.4.1.2682.1.3.2.1.8
An auxiliary user-defined text string associated with the alarm (i.e. This remote needs servicing).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2ADispDesc 1.3.6.1.4.1.2682.1.3.2.1.9
A description of the display on which this point appears.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2APntType 1.3.6.1.4.1.2682.1.3.2.1.10
Type of this point.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..999  

tmonV2APort 1.3.6.1.4.1.2682.1.3.2.1.11
Port on which this point is reported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2AAddress 1.3.6.1.4.1.2682.1.3.2.1.12
Address of unit reporting this point.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..9999  

tmonV2ADisplay 1.3.6.1.4.1.2682.1.3.2.1.13
Display on which this point appears.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2APoint 1.3.6.1.4.1.2682.1.3.2.1.14
Index into display of this point.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

tmonV2AEvent 1.3.6.1.4.1.2682.1.3.2.1.15
Event id for this message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2AIPAddr 1.3.6.1.4.1.2682.1.3.2.1.16
The IP Address of the device on which this point appears.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2ADevDesc 1.3.6.1.4.1.2682.1.3.2.1.17
A description of the devie on which this point appears.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tmonV2CommandGrid 1.3.6.1.4.1.2682.1.3.3
OBJECT IDENTIFIER    

tmonV2CPType 1.3.6.1.4.1.2682.1.3.3.1
Tmon point type.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2CPort 1.3.6.1.4.1.2682.1.3.3.2
Tmon port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2CAddress 1.3.6.1.4.1.2682.1.3.3.3
Tmon_port address number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..9999  

tmonV2CDisplay 1.3.6.1.4.1.2682.1.3.3.4
Tmon_port_address display number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2CPoint 1.3.6.1.4.1.2682.1.3.3.5
Tmon_port_display point number (1-64).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..64  

tmonV2CEvent 1.3.6.1.4.1.2682.1.3.3.6
Tmon event ID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

tmonV2CAction 1.3.6.1.4.1.2682.1.3.3.7
Requested command action (tmonV2XM will ignore if invalid).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER latch(1), release(2), momentary(3), ack(17), tag(18), untag(19)  

tmonV2CAuxText 1.3.6.1.4.1.2682.1.3.3.8
An auxiliary user-defined text string associated with the command (i.e. User_initials).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

tmonV2CResult 1.3.6.1.4.1.2682.1.3.3.9
Command result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), failure(2), pending(3)  

dpsRTUv2 1.3.6.1.4.1.2682.1.4
OBJECT IDENTIFIER    

dpsRTUv2Ident 1.3.6.1.4.1.2682.1.4.1
OBJECT IDENTIFIER    

dpsRTUv2Manufacturer 1.3.6.1.4.1.2682.1.4.1.1
The Remote Telemetry Unit manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2Model 1.3.6.1.4.1.2682.1.4.1.2
The RTU model designation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2FirmwareVersion 1.3.6.1.4.1.2682.1.4.1.3
The RTU firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2DateTime 1.3.6.1.4.1.2682.1.4.1.4
The RTU system date and time.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dpsRTUv2SyncReq 1.3.6.1.4.1.2682.1.4.1.5
Caution: SETting this object initiates traps for all standing alarms.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sync(1)  

dpsRTUv2DisplayGrid 1.3.6.1.4.1.2682.1.4.2
Holds information on displays managed by the RTU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DPSrtuV2DispEntry

dpsRTUv2DisplayEntry 1.3.6.1.4.1.2682.1.4.2.1
Information about a particular RTU display.
Status: current Access: not-accessible
OBJECT-TYPE    
  DPSrtuV2DispEntry  

dpsRTUv2Port 1.3.6.1.4.1.2682.1.4.2.1.1
RTU port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2Address 1.3.6.1.4.1.2682.1.4.2.1.2
RTU_port address number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..9999  

dpsRTUv2Display 1.3.6.1.4.1.2682.1.4.2.1.3
RTU_port_address display number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2DispDesc 1.3.6.1.4.1.2682.1.4.2.1.4
A description of the associated display.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2PntMap 1.3.6.1.4.1.2682.1.4.2.1.5
A map of the points appearing in this display.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2ControlGrid 1.3.6.1.4.1.2682.1.4.3
OBJECT IDENTIFIER    

dpsRTUv2CPort 1.3.6.1.4.1.2682.1.4.3.1
RTU port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2CAddress 1.3.6.1.4.1.2682.1.4.3.2
RTU_port address number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..9999  

dpsRTUv2CDisplay 1.3.6.1.4.1.2682.1.4.3.3
RTU_port_address display number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2CPoint 1.3.6.1.4.1.2682.1.4.3.4
RTU_port_display point number (1-64).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..64  

dpsRTUv2CAction 1.3.6.1.4.1.2682.1.4.3.5
Requested action on point (RTU will ignore if invalid).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER latch(1), release(2), momentary(3)  

dpsRTUv2AlarmGrid 1.3.6.1.4.1.2682.1.4.5
Holds individual alarm point information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DPSrtuV2AlarmEntry

dpsRTUv2AlarmEntry 1.3.6.1.4.1.2682.1.4.5.1
Detailed information about a particular RTU display.
Status: current Access: not-accessible
OBJECT-TYPE    
  DPSrtuV2AlarmEntry  

dpsRTUv2APort 1.3.6.1.4.1.2682.1.4.5.1.1
RTU port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2AAddress 1.3.6.1.4.1.2682.1.4.5.1.2
RTU_port address number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..9999  

dpsRTUv2ADisplay 1.3.6.1.4.1.2682.1.4.5.1.3
RTU_port_address display number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

dpsRTUv2APoint 1.3.6.1.4.1.2682.1.4.5.1.4
RTU_port_address_display point number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

dpsRTUv2APntDesc 1.3.6.1.4.1.2682.1.4.5.1.5
A description of this point.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsRTUv2AState 1.3.6.1.4.1.2682.1.4.5.1.6
The current state of this point.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

analogChannelsv2 1.3.6.1.4.1.2682.1.4.6
Holds information on analog channels
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelEntryv2

channelEntryv2 1.3.6.1.4.1.2682.1.4.6.1
Information about a particular channel
Status: current Access: not-accessible
OBJECT-TYPE    
  ChannelEntryv2  

channelNumberv2 1.3.6.1.4.1.2682.1.4.6.1.1
Input channel number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

enabledv2 1.3.6.1.4.1.2682.1.4.6.1.2
Enable status of channel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

descriptionv2 1.3.6.1.4.1.2682.1.4.6.1.3
The user defined description of the channel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

valuev2 1.3.6.1.4.1.2682.1.4.6.1.4
The current value of the channel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

thresholdsv2 1.3.6.1.4.1.2682.1.4.6.1.5
Highest threshold level crossed, if MJ, MN is assumed
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAlarms(0), minorUnder(1), minorOver(2), majorUnder(3), majorOver(4), notDetected(5)  

tmonV2CRalarmSet 1.3.6.1.4.1.2682.1.1.10
Generated when a critical alarm is set.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2CRalarmClr 1.3.6.1.4.1.2682.1.1.11
Generated when a critical alarm clears.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2MJalarmSet 1.3.6.1.4.1.2682.1.1.12
Generated when a major alarm is set.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2MJalarmClr 1.3.6.1.4.1.2682.1.1.13
Generated when a major alarm clears.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2MNalarmSet 1.3.6.1.4.1.2682.1.1.14
Generated when a minor alarm is set.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2MNalarmClr 1.3.6.1.4.1.2682.1.1.15
Generated when a minor alarm clears.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2STalarmSet 1.3.6.1.4.1.2682.1.1.16
Generated when a status alarm is set.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmonV2STalarmClr 1.3.6.1.4.1.2682.1.1.17
Generated when a status alarm clears.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor