DNS-TRAPS-MIB

File: DNS-TRAPS-MIB.mib (15739 bytes)

Imported modules

SNMPv2-SMI BCS-IDENT-MIB

Imported symbols

OBJECT-TYPE Integer32 MODULE-IDENTITY
bcs

Defined Values

dns 1.3.6.1.4.1.1166.7.5
The MIB module for the DNS common trap VARIABLES. The MIB tree for this MIB is shown below: revision number sds0.001 - initial version revision number sds0.002 - revised with the changes (1) traps are template defined here, it should be copied to application mib module with correct ENTERPRISE declared. (2) all alarm var.'s SYNTAX use enumeration of severity level definition.
MODULE-IDENTITY    

dnsTraps 1.3.6.1.4.1.1166.7.5.1
OBJECT IDENTIFIER    

dnsAlarms 1.3.6.1.4.1.1166.7.5.2
OBJECT IDENTIFIER    

alarmConditionNotInList 1.3.6.1.4.1.1166.7.5.2.20
Alarm which occurs when a clear condition command is issued and there is no such condition in the current condition list. This is a counter for the trap 20.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmConditionAlreadyInList 1.3.6.1.4.1.1166.7.5.2.21
Alarm which occurs when a set condition command is issued and there is already the same condition in the current condition list. This is a counter for the trap 21.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmConditionListFull 1.3.6.1.4.1.1166.7.5.2.22
Alarm which occurs when a set condition command is issued and there is no room in the current condition list. This is a counter for the trap 22.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmInvalidCaseInSwitch 1.3.6.1.4.1.1166.7.5.2.23
Alarm which occurs when in a switch statement the default case is reached. This is a counter for the trap 23.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmCannotCreateSemaphore 1.3.6.1.4.1.1166.7.5.2.24
Alarm which occurs when a semaphore cannot be created. This is a counter for the trap 24.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmCannotOpenSocket 1.3.6.1.4.1.1166.7.5.2.25
Alarm which occurs when a socket cannot be opened. This is a counter for the trap 25.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmUnknownMessageReceived 1.3.6.1.4.1.1166.7.5.2.26
Alarm which occurs when an unknown message is received. This is a counter for the trap 26.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alarmInvalidMessageReceived 1.3.6.1.4.1.1166.7.5.2.27
Alarm which occurs when an invalid message is received. This is a counter for the trap 27.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32