DLINKSW-STP-EXT-MIB
File:
DLINKSW-STP-EXT-MIB.mib (11559 bytes)
Imported modules
Imported symbols
Defined Types
DStpExtPortEntry |
|
SEQUENCE |
|
|
|
|
dStpExtPortNumber |
IEEE8021BridgePortNumber |
|
|
dStpExtPortForwardBpduEnabled |
TruthValue |
|
|
dStpExtPortAdminHelloTime |
Unsigned32 |
|
|
dStpExtPortState |
INTEGER |
|
DStpExtMstpPortEntry |
|
SEQUENCE |
|
|
|
|
dStpExtMstpPortMstId |
IEEE8021MstIdentifier |
|
|
dStpExtMstpPortNum |
IEEE8021BridgePortNumber |
|
|
dStpExtMstpPortRole |
INTEGER |
|
Defined Values
dlinkSwStpExtMIB |
1.3.6.1.4.1.171.14.15 |
The MIB module for managing D-Link STP extensions which are not covered
by standard MIBs. |
MODULE-IDENTITY |
|
|
|
dStpExtNotificationEnable |
1.3.6.1.4.1.171.14.15.1.1.2 |
This object indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
newRoot(0) - the newRoot notification as defined in BRIDGE-MIB.
topologyChange(1) -- the topologyChange notification as defined in
BRIDGE-MIB.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
BITS |
newRoot(0), topologyChange(1) |
|
dStpExtStpNniBpduAddress |
1.3.6.1.4.1.171.14.15.1.1.3 |
Specifies the BPDU MAC address of the NNI port in Q-in-Q status.
dot1d - Use Customer Bridge Group Address (01-80-C2-00-00-00) as
destination address of STP BPDU.
dot1ad - Use Provider Bridge Group Address (01-80-C2-00-00-08) as
destination address of STP BPDU.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dot1d(1), dot1ad(2) |
|
dStpExtPortTable |
1.3.6.1.4.1.171.14.15.1.2.1 |
A table that contains port-specific information
for the STP extensions. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DStpExtPortEntry |
|
dStpExtPortEntry |
1.3.6.1.4.1.171.14.15.1.2.1.1 |
An entry in dStpExtPortTable. This object indicates per port
STP information which is not covered by standard MIB(s). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DStpExtPortEntry |
|
|
dStpExtPortForwardBpduEnabled |
1.3.6.1.4.1.171.14.15.1.2.1.1.2 |
This object indicates whether forward the received STP BPDUs to all
VLAN member ports in untagged form.
dStpExtPortForwardBpduEnabled cannot be set to 'true' when
spanning-tree protocol is enabled on the interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
dStpExtPortAdminHelloTime |
1.3.6.1.4.1.171.14.15.1.2.1.1.3 |
This object indicates the time interval to send one BPDU at the
designated port.
dStpExtPortAdminHelloTime only takes effect in MSTP mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..2 |
|
dStpExtPortState |
1.3.6.1.4.1.171.14.15.1.2.1.1.4 |
This object indicates the state of STP port.
errDisabled(1): the port is at error disabled state.
blocking(2) - broken(6): When STP is enabled on the port and the
port is not at error disabled state, dStpExtPortState
has the same value as dot1dStpPortState, as defined
by application of STP.
noStpForwarding(7) - STP is disabled at the port and this port is
functioning.
nonStpOther(8) - STP is disabled at the port and this port is link-down
or other malfunctioning situations.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
errDisabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6), nonStpForwarding(7), nonStpOther(8) |
|
dStpExtMstpPortTable |
1.3.6.1.4.1.171.14.15.1.3.1 |
A table that contains MSTI-specific information
which are not covered by ieee8021MstpPortTable.
Note that entries will exist in this table only for bridge
components for which the corresponding instance of
ieee8021SpanningTreeVersion (from the IEEE8021-SPANNING-TREE-MIB)
has a value of mstp(2) and the corresponding port is not disabled.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DStpExtMstpPortEntry |
|
dStpExtMstpPortEntry |
1.3.6.1.4.1.171.14.15.1.3.1.1 |
An entry in dStpExtMstPortTable, which consists of information
is not covered by ieee8021MstpPortTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DStpExtMstpPortEntry |
|
|
dStpExtMstpPortMstId |
1.3.6.1.4.1.171.14.15.1.3.1.1.1 |
In an MSTP Bridge, this parameter is the MSTID, i.e. the
identifier of a Spanning Tree (or MST) Instance. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IEEE8021MstIdentifier |
|
|
dStpExtMstpPortNum |
1.3.6.1.4.1.171.14.15.1.3.1.1.2 |
In an MSTP Bridge, the Port's Port Number parameter value for
the MSTI, i.e. the number of the Bridge Port for the MSTI. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IEEE8021BridgePortNumber |
|
|
dStpExtMstpPortRole |
1.3.6.1.4.1.171.14.15.1.3.1.1.3 |
The MSTI's current port role as defined by application of MSTP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
root(1), alternate(2), designated(3), backup(4), master(5) |
|
dStpExtCompliance |
1.3.6.1.4.1.171.14.15.2.1.1 |
The compliance statement for entities which implement the
DLINKSW-STP-EXT-MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
dStpExtBasicGroup |
1.3.6.1.4.1.171.14.15.2.1.2.1 |
This group contains the collection of objects related to
STP/RSTP configuration/status which cannot be covered by
standard MIBs. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
dStpExtMstpGroup |
1.3.6.1.4.1.171.14.15.2.1.2.2 |
This group contains the collection of objects related to
MSTP configuration/status which cannot be covered by
standard MIBs. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
dStpExtServiceProviderCfgGroup |
1.3.6.1.4.1.171.14.15.2.1.2.3 |
A collection of objects configures STP in service provider site. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|