DLINKSW-IMPB-MIB

File: DLINKSW-IMPB-MIB.mib (9862 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB IF-MIB Q-BRIDGE-MIB
DLINK-ID-REC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP MacAddress TruthValue
InetAddress InetAddressType ifIndex
InterfaceIndexOrZero VlanId dlinkIndustrialCommon

Defined Types

DImpbIfConfigEntry  
SEQUENCE    
  dImpbIfBindMode INTEGER

DImpbViolationLogEntry  
SEQUENCE    
  dImpbViolationVlan VlanId
  dImpbViolationMacAddress MacAddress
  dImpbViolationAction INTEGER

Defined Values

dlinkSwImpbMIB 1.3.6.1.4.1.171.14.22
The MIB module defines objects for IP-MAC-Port Binding feature.
MODULE-IDENTITY    

dImpbNotifications 1.3.6.1.4.1.171.14.22.0
OBJECT IDENTIFIER    

dImpbObjects 1.3.6.1.4.1.171.14.22.1
OBJECT IDENTIFIER    

dImpbConformance 1.3.6.1.4.1.171.14.22.2
OBJECT IDENTIFIER    

dImpbNotifyInfo 1.3.6.1.4.1.171.14.22.1.1
OBJECT IDENTIFIER    

dImpbGlobalNotifyEnabled 1.3.6.1.4.1.171.14.22.1.1.1
Set to 'true' to enable global SNMP notification for IP-MAC-Port Binding feature. Setting the object to 'false' will disable SNMP notifications.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dImpbViolationIpAddrType 1.3.6.1.4.1.171.14.22.1.1.2
This object indicates the type of the violation IP address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

dImpbViolationIpAddress 1.3.6.1.4.1.171.14.22.1.1.3
This object indicates the IP address of the violation entry.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

dImpbIfConfigTable 1.3.6.1.4.1.171.14.22.1.2
A table provides the mechanism to enable or disable IP-MAC-Port Binding at each physical interface capable of this feature. For IPV4 network, IP-MAC-Port Binding must co-work with both IPv4 source guard and Dynamic ARP inspection are enabled. For IPv6 network, IP-MAC-Port Binding must co-work with both IPv6 source guard and ND inspection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DImpbIfConfigEntry

dImpbIfConfigEntry 1.3.6.1.4.1.171.14.22.1.2.1
A row instance contains the configuration to enable or disable IP-MAC-Port Binding as well as the configuration of the filter type at each physical interface capable of IP-MAC-Port Binding feature.
Status: current Access: not-accessible
OBJECT-TYPE    
  DImpbIfConfigEntry  

dImpbIfBindMode 1.3.6.1.4.1.171.14.22.1.2.1.1
This object indicates the IP-MAC-Port Binding access control applied at this interface. 'disable' indicates that IP-MAC-Port Binding feature is disabled. 'strict' indicates performing strict-mode access control. 'loose' indicates to perform loose-mode access control. For IPv6 network, IP-MAC-Port Binding must operate in strict mode, otherwise IPv6 source guard and ND inspection cannot be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), strict(2), loose(3)  

dImpbViolationLogTable 1.3.6.1.4.1.171.14.22.1.3
A table provides the information about the violation of IP-MAC-Port Binding.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DImpbViolationLogEntry

dImpbViolationLogEntry 1.3.6.1.4.1.171.14.22.1.3.1
A row instance contains the blocked entry of IP-MAC-Port Binding.
Status: current Access: not-accessible
OBJECT-TYPE    
  DImpbViolationLogEntry  

dImpbViolationVlan 1.3.6.1.4.1.171.14.22.1.3.1.1
This object indicates the VLAN of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

dImpbViolationMacAddress 1.3.6.1.4.1.171.14.22.1.3.1.2
This object indicates the MAC address of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dImpbViolationAction 1.3.6.1.4.1.171.14.22.1.3.1.99
This object is used to remove a specific violation entry when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), noOp(2)  

dImpbClearObjects 1.3.6.1.4.1.171.14.22.1.4
OBJECT IDENTIFIER    

dImpbClearAllViolation 1.3.6.1.4.1.171.14.22.1.4.1
This object is used to clear all violations of IP-MAC-Port Binding when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), noOp(2)  

dImpbClearViolationByIf 1.3.6.1.4.1.171.14.22.1.4.2
This object indicates the ifIndex on which all violations will be cleared. When read, the special value 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

dImpbViolationTrap 1.3.6.1.4.1.171.14.22.0.1
The address violation notification is generated when IP-MAC-Port Binding address violation is detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

dImpbMIBCompliances 1.3.6.1.4.1.171.14.22.2.1
OBJECT IDENTIFIER    

dImpbMIBGroups 1.3.6.1.4.1.171.14.22.2.2
OBJECT IDENTIFIER    

dImpbMIBCompliance 1.3.6.1.4.1.171.14.22.2.1.1
The compliance statement for the DLINKSW-IMPB-MIB
Status: current Access: read-write
MODULE-COMPLIANCE    

dImpbConfigGroup 1.3.6.1.4.1.171.14.22.2.2.1
A collection of objects which are used to configure as well as show information regarding the IP-MAC-Port Binding.
Status: current Access: read-write
OBJECT-GROUP    

dImpbClearViolationLogGroup 1.3.6.1.4.1.171.14.22.2.2.2
A collection of objects which are used to clear violation information.
Status: current Access: read-write
OBJECT-GROUP    

dImpbNotificationsGroup 1.3.6.1.4.1.171.14.22.2.2.3
The collection of objects provides IP-MAC-Port Binding notifications.
Status: current Access: read-write
NOTIFICATION-GROUP