DLINK-3100-DEVICEPARAMS-MIB

File: DLINK-3100-DEVICEPARAMS-MIB.mib (22471 bytes)

Imported modules

DLINK-3100-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

rnd OBJECT-TYPE MODULE-IDENTITY
IpAddress TruthValue DisplayString
PhysAddress

Defined Types

RndCommunityEntry  
SEQUENCE    
  rndCommunityMngStationAddr IpAddress
  rndCommunityString DisplayString
  rndCommunityAccess INTEGER
  rndCommunityTrapsEnable INTEGER
  rndCommunityStatus INTEGER
  rndCommunityPortSecurity INTEGER
  rndCommunityOwner DisplayString
  rndCommunityTrapDestPort INTEGER

RlMridEntry  
SEQUENCE    
  rlMridConnection INTEGER
  rlManagedMrid INTEGER

RlImageIdType  
SW images enumeration
TEXTUAL-CONVENTION    
  INTEGER image1(1), image2(2)  

RndActiveSoftwareFileEntry  
SEQUENCE    
  rndUnitNumber INTEGER
  rndActiveSoftwareFile RlImageIdType
  rndActiveSoftwareFileAfterReset INTEGER

RndImageInfoEntry  
SEQUENCE    
  rndStackUnitNumber INTEGER
  rndImage1Name DisplayString
  rndImage2Name DisplayString
  rndImage1Version DisplayString
  rndImage2Version DisplayString
  rndImage1Date DisplayString
  rndImage2Date DisplayString
  rndImage1Time DisplayString
  rndImage2Time DisplayString

RlComponentsInfoEntry  
SEQUENCE    
  rlComponentsInfoStackUnitNumber INTEGER
  rlComponentsInfoImageId RlImageIdType
  rlComponentsInfoComponent DisplayString
  rlComponentsInfoBaseline DisplayString

Defined Values

rndDeviceParams 1.3.6.1.4.1.171.10.94.89.89.2
This private MIB module defines general Parameters private MIBs.
MODULE-IDENTITY    

rndBridgeType 1.3.6.1.4.1.171.10.94.89.89.2.1
Identification of the RND bridge type.
OBJECT-TYPE    
  INTEGER reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)  

rndInactiveArpTimeOut 1.3.6.1.4.1.171.10.94.89.89.2.2
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
OBJECT-TYPE    
  INTEGER  

rndBridgeAlarm 1.3.6.1.4.1.171.10.94.89.89.2.3
OBJECT IDENTIFIER    

rndErrorDesc 1.3.6.1.4.1.171.10.94.89.89.2.3.1
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
OBJECT-TYPE    
  DisplayString  

rndErrorSeverity 1.3.6.1.4.1.171.10.94.89.89.2.3.2
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
OBJECT-TYPE    
  INTEGER info(0), warning(1), error(2), fatal-error(3)  

rndBrgVersion 1.3.6.1.4.1.171.10.94.89.89.2.4
The bridge version.
OBJECT-TYPE    
  DisplayString  

rndBrgFeatures 1.3.6.1.4.1.171.10.94.89.89.2.5
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved DLINK-3100 bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware
OBJECT-TYPE    
  OCTET STRING  

rndBrgLicense 1.3.6.1.4.1.171.10.94.89.89.2.6
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
OBJECT-TYPE    
  OCTET STRING  

rndIpHost 1.3.6.1.4.1.171.10.94.89.89.2.7
OBJECT IDENTIFIER    

rndCommunityTable 1.3.6.1.4.1.171.10.94.89.89.2.7.2
The community table of the agent
OBJECT-TYPE    
  SEQUENCE OF  
    RndCommunityEntry

rndCommunityEntry 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1
The row definition for this table.
OBJECT-TYPE    
  RndCommunityEntry  

rndCommunityMngStationAddr 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.1
The management station that will be allowed to communicate with the agent IP address
OBJECT-TYPE    
  IpAddress  

rndCommunityString 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.2
The community string with which the management station will communicate with the agent
OBJECT-TYPE    
  DisplayString Size(1..20)  

rndCommunityAccess 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.3
The allowed access to this management station
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2), super(3)  

rndCommunityTrapsEnable 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.4
Should the agent send traps to the management station, and what version is required
OBJECT-TYPE    
  INTEGER snmpV1(1), snmpV2(2), snmpV3(3), trapsDisable(4)  

rndCommunityStatus 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.5
The status of this entry. If the status is invalid the community entry will be deleted
OBJECT-TYPE    
  INTEGER enable(1), invalid(2)  

rndCommunityPortSecurity 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.6
If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rndCommunityOwner 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.7
The owner of this community
OBJECT-TYPE    
  DisplayString Size(1..32)  

rndCommunityTrapDestPort 1.3.6.1.4.1.171.10.94.89.89.2.7.2.1.8
The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable.
OBJECT-TYPE    
  INTEGER 0..65535  

rlMridTable 1.3.6.1.4.1.171.10.94.89.89.2.7.3
The MRID related configurations table of the agent
OBJECT-TYPE    
  SEQUENCE OF  
    RlMridEntry

rlMridEntry 1.3.6.1.4.1.171.10.94.89.89.2.7.3.1
The row definition for this table.
OBJECT-TYPE    
  RlMridEntry  

rlMridConnection 1.3.6.1.4.1.171.10.94.89.89.2.7.3.1.1
The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry.
OBJECT-TYPE    
  INTEGER  

rlManagedMrid 1.3.6.1.4.1.171.10.94.89.89.2.7.3.1.2
The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry
OBJECT-TYPE    
  INTEGER  

rndManagedTime 1.3.6.1.4.1.171.10.94.89.89.2.8
The time will be sent in the format hhmmss
OBJECT-TYPE    
  DisplayString Size(6)  

rndManagedDate 1.3.6.1.4.1.171.10.94.89.89.2.9
The date will be sent in the format ddmmyy
OBJECT-TYPE    
  DisplayString Size(6)  

rndBaseBootVersion 1.3.6.1.4.1.171.10.94.89.89.2.10
Defines the boot version of the product.
OBJECT-TYPE    
  DisplayString  

rndIpHostManagement 1.3.6.1.4.1.171.10.94.89.89.2.7.4
OBJECT IDENTIFIER    

rndIpHostManagementSupported 1.3.6.1.4.1.171.10.94.89.89.2.7.4.1
ifindex manage supported.
OBJECT-TYPE    
  TruthValue  

rndIpHostManagementIfIndex 1.3.6.1.4.1.171.10.94.89.89.2.7.4.2
if supported manage , indicate ifindex, if 0 thaen disable
OBJECT-TYPE    
  INTEGER  

genGroup 1.3.6.1.4.1.171.10.94.89.89.2.11
OBJECT IDENTIFIER    

genGroupHWVersion 1.3.6.1.4.1.171.10.94.89.89.2.11.1
Defines the HW version of the product.
OBJECT-TYPE    
  DisplayString  

genGroupConfigurationSymbol 1.3.6.1.4.1.171.10.94.89.89.2.11.2
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
OBJECT-TYPE    
  DisplayString Size(1)  

genGroupHWStatus 1.3.6.1.4.1.171.10.94.89.89.2.11.3
This attribute describes the status of the group hardware as detected by the sensors software.
OBJECT-TYPE    
  INTEGER ok(1), hardwareProblems(2), notSupported(255)  

rndBasePhysicalAddress 1.3.6.1.4.1.171.10.94.89.89.2.12
The Base physical (MAC) address of the device.
OBJECT-TYPE    
  PhysAddress  

rndSoftwareFile 1.3.6.1.4.1.171.10.94.89.89.2.13
OBJECT IDENTIFIER    

rndActiveSoftwareFileTable 1.3.6.1.4.1.171.10.94.89.89.2.13.1
The (conceptual) table listing the active software file of the requested unit.
OBJECT-TYPE    
  SEQUENCE OF  
    RndActiveSoftwareFileEntry

rndActiveSoftwareFileEntry 1.3.6.1.4.1.171.10.94.89.89.2.13.1.1
An entry (conceptual row) in the rndActiveSoftwareFileTable.
OBJECT-TYPE    
  RndActiveSoftwareFileEntry  

rndUnitNumber 1.3.6.1.4.1.171.10.94.89.89.2.13.1.1.1
The unit number (for stackable devices) or 1 for 'stand alone' device.
OBJECT-TYPE    
  INTEGER  

rndActiveSoftwareFile 1.3.6.1.4.1.171.10.94.89.89.2.13.1.1.2
Indicates the current active software file, image1 or image2.
OBJECT-TYPE    
  RlImageIdType  

rndActiveSoftwareFileAfterReset 1.3.6.1.4.1.171.10.94.89.89.2.13.1.1.3
Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user.
OBJECT-TYPE    
  INTEGER image1(1), image2(2), invalidImage(3)  

rlResetStatus 1.3.6.1.4.1.171.10.94.89.89.2.13.2
A bit mask that specifies system status before reset action is preformed. Reset is prohibited in stackable products if the images selected after reboot are not of the same release version in ALL stack units. Downgrade status specifies that there are some actions to be preformed on the CDB file before reset is preformed. 0x0 - OK 0x1 - noStackIntegrity 0x2 - downgrade
OBJECT-TYPE    
  BITS ok(0), no-stack-integrity(1), downgrade(2)  

rndImageSize 1.3.6.1.4.1.171.10.94.89.89.2.14
Max number of sectors currently allocated for image(s).
OBJECT-TYPE    
  INTEGER  

rndBackupConfigurationEnabled 1.3.6.1.4.1.171.10.94.89.89.2.15
Specifies whether the device supports backup-config parameters in lcli commands.
OBJECT-TYPE    
  TruthValue  

rndImageInfo 1.3.6.1.4.1.171.10.94.89.89.2.16
OBJECT IDENTIFIER    

rndImageInfoTable 1.3.6.1.4.1.171.10.94.89.89.2.16.1
The table contains information about images.
OBJECT-TYPE    
  SEQUENCE OF  
    RndImageInfoEntry

rndImageInfoEntry 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1
An entry in the rndImageInfoTable.
OBJECT-TYPE    
  RndImageInfoEntry  

rndStackUnitNumber 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.1
The unit number (for stackable devices) or 1 for 'stand alone' device.
OBJECT-TYPE    
  INTEGER  

rndImage1Name 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.2
Indicates the file name of image-1 in the system.
OBJECT-TYPE    
  DisplayString  

rndImage2Name 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.3
Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text
OBJECT-TYPE    
  DisplayString  

rndImage1Version 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.4
Indicates the version of image-1 in the system.
OBJECT-TYPE    
  DisplayString  

rndImage2Version 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.5
Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text
OBJECT-TYPE    
  DisplayString  

rndImage1Date 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.6
Indicates the compilation date of image-1 in the system.
OBJECT-TYPE    
  DisplayString  

rndImage2Date 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.7
Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text
OBJECT-TYPE    
  DisplayString  

rndImage1Time 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.8
Indicates the compilation time of image-1 in the system.
OBJECT-TYPE    
  DisplayString  

rndImage2Time 1.3.6.1.4.1.171.10.94.89.89.2.16.1.1.9
Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text
OBJECT-TYPE    
  DisplayString  

rlComponentsInfoTable 1.3.6.1.4.1.171.10.94.89.89.2.16.2
The table contains information about components, their streams and baselines in the device images.
OBJECT-TYPE    
  SEQUENCE OF  
    RlComponentsInfoEntry

rlComponentsInfoEntry 1.3.6.1.4.1.171.10.94.89.89.2.16.2.1
An entry in the rlComponentsInfoTable.
OBJECT-TYPE    
  RlComponentsInfoEntry  

rlComponentsInfoStackUnitNumber 1.3.6.1.4.1.171.10.94.89.89.2.16.2.1.1
The unit number (for stackable devices) or 1 for 'stand alone' device.
OBJECT-TYPE    
  INTEGER  

rlComponentsInfoImageId 1.3.6.1.4.1.171.10.94.89.89.2.16.2.1.2
Indicates the image id in the unit
OBJECT-TYPE    
  RlImageIdType  

rlComponentsInfoComponent 1.3.6.1.4.1.171.10.94.89.89.2.16.2.1.3
Indicates the SW component name.
OBJECT-TYPE    
  DisplayString Size(1..40)  

rlComponentsInfoBaseline 1.3.6.1.4.1.171.10.94.89.89.2.16.2.1.5
Indicates the version control baseline of the SW component name.
OBJECT-TYPE    
  DisplayString