DKSF-50-8-1-A-X

File: DKSF-50-8-1-A-X.mib (10023 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
SNMPv2-MIB

Imported symbols

enterprises MODULE-IDENTITY OBJECT-TYPE
Counter32 Gauge32 Counter64
Integer32 TimeTicks mib-2
NOTIFICATION-TYPE TEXTUAL-CONVENTION DisplayString
TruthValue TimeStamp snmpTraps

Defined Types

NpPwrEntry  
SEQUENCE    
  npPwrChannelN INTEGER
  npPwrStartReset INTEGER
  npPwrManualMode INTEGER
  npPwrResetsCounter INTEGER
  npPwrRepeatingResetsCounter INTEGER
  npPwrMemo DisplayString

NpThermoEntry  
SEQUENCE    
  npThermoSensorN INTEGER
  npThermoValue INTEGER
  npThermoStatus INTEGER
  npThermoLow INTEGER
  npThermoHigh INTEGER
  npThermoMemo DisplayString

NpIoEntry  
SEQUENCE    
  npIoLineN INTEGER
  npIoLevelIn INTEGER
  npIoLevelOut INTEGER
  npIoMemo DisplayString

NpCurLoopEntry  
SEQUENCE    
  npCurLoopN INTEGER
  npCurLoopStatus INTEGER
  npCurLoopI INTEGER
  npCurLoopV INTEGER
  npCurLoopR INTEGER
  npCurLoopPower INTEGER

Defined Values

netPing 1.3.6.1.4.1.25728.50
Generic MIB for NetPing remote sensing and control
MODULE-IDENTITY    

lightcom 1.3.6.1.4.1.25728
OBJECT IDENTIFIER    

npPwr 1.3.6.1.4.1.25728.5800
OBJECT IDENTIFIER    

npPwrTable 1.3.6.1.4.1.25728.5800.3
Watchdog and outlet/relay control table
OBJECT-TYPE    
  SEQUENCE OF  
    NpPwrEntry

npPwrEntry 1.3.6.1.4.1.25728.5800.3.1
Watchdog and outlet/relay control table row
OBJECT-TYPE    
  NpPwrEntry  

npPwrChannelN 1.3.6.1.4.1.25728.5800.3.1.1
The id of watchdog/power channel
OBJECT-TYPE    
  INTEGER 1..10  

npPwrStartReset 1.3.6.1.4.1.25728.5800.3.1.2
Write 1 to start reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active
OBJECT-TYPE    
  INTEGER 0..2  

npPwrManualMode 1.3.6.1.4.1.25728.5800.3.1.3
Mode of power channel 0 - manual off 1 - manual on 2 - watchdog
OBJECT-TYPE    
  INTEGER off(0), on(1), watchdog(2)  

npPwrResetsCounter 1.3.6.1.4.1.25728.5800.3.1.4
Counter of watchdog resets Write 0 to clear.
OBJECT-TYPE    
  INTEGER 0..65535  

npPwrRepeatingResetsCounter 1.3.6.1.4.1.25728.5800.3.1.5
Counter of continous failed watchdog resets
OBJECT-TYPE    
  INTEGER 0..65535  

npPwrMemo 1.3.6.1.4.1.25728.5800.3.1.6
Watchdog/power channel memo
OBJECT-TYPE    
  DisplayString  

npThermo 1.3.6.1.4.1.25728.8800
OBJECT IDENTIFIER    

npThermoTable 1.3.6.1.4.1.25728.8800.1
Thermo Sensors Table
OBJECT-TYPE    
  SEQUENCE OF  
    NpThermoEntry

npThermoEntry 1.3.6.1.4.1.25728.8800.1.1
Thermo Sensors Table Row
OBJECT-TYPE    
  NpThermoEntry  

npThermoSensorN 1.3.6.1.4.1.25728.8800.1.1.1
The id of temperature sensor, 1 to 8
OBJECT-TYPE    
  INTEGER 1..8  

npThermoValue 1.3.6.1.4.1.25728.8800.1.1.2
Temperature, deg.C
OBJECT-TYPE    
  INTEGER -60..280  

npThermoStatus 1.3.6.1.4.1.25728.8800.1.1.3
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
OBJECT-TYPE    
  INTEGER failed(0), low(1), norm(2), high(3)  

npThermoLow 1.3.6.1.4.1.25728.8800.1.1.4
Bottom margin of normal temperature range, deg.C
OBJECT-TYPE    
  INTEGER -60..280  

npThermoHigh 1.3.6.1.4.1.25728.8800.1.1.5
Top margin of normal temperature range, deg.C
OBJECT-TYPE    
  INTEGER -60..280  

npThermoMemo 1.3.6.1.4.1.25728.8800.1.1.6
T channel memo
OBJECT-TYPE    
  DisplayString  

npIo 1.3.6.1.4.1.25728.8900
OBJECT IDENTIFIER    

npIoTable 1.3.6.1.4.1.25728.8900.1
Digital Input/output Table
OBJECT-TYPE    
  SEQUENCE OF  
    NpIoEntry

npIoEntry 1.3.6.1.4.1.25728.8900.1.1
Digital Input/output Table Row
OBJECT-TYPE    
  NpIoEntry  

npIoLineN 1.3.6.1.4.1.25728.8900.1.1.1
Number of IO line, from 1 to max supported
OBJECT-TYPE    
  INTEGER 1..16  

npIoLevelIn 1.3.6.1.4.1.25728.8900.1.1.2
Input level, 0 or 1
OBJECT-TYPE    
  INTEGER 0..1  

npIoLevelOut 1.3.6.1.4.1.25728.8900.1.1.3
Output level, 0 or 1
OBJECT-TYPE    
  INTEGER 0..1  

npIoMemo 1.3.6.1.4.1.25728.8900.1.1.6
IO line memo
OBJECT-TYPE    
  DisplayString  

npCurLoop 1.3.6.1.4.1.25728.8300
OBJECT IDENTIFIER    

npCurLoopTable 1.3.6.1.4.1.25728.8300.1
Current loop sensors Table
OBJECT-TYPE    
  SEQUENCE OF  
    NpCurLoopEntry

npCurLoopEntry 1.3.6.1.4.1.25728.8300.1.1
Current loop sensors Table Row
OBJECT-TYPE    
  NpCurLoopEntry  

npCurLoopN 1.3.6.1.4.1.25728.8300.1.1.1
Index of current loop, 1 to max supported
OBJECT-TYPE    
  INTEGER 1..8  

npCurLoopStatus 1.3.6.1.4.1.25728.8300.1.1.2
Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
OBJECT-TYPE    
  INTEGER ok(0), alert(1), cut(2), short(3), notPowered(4)  

npCurLoopI 1.3.6.1.4.1.25728.8300.1.1.3
Loop current, mA
OBJECT-TYPE    
  INTEGER 0..99999  

npCurLoopV 1.3.6.1.4.1.25728.8300.1.1.4
Voltage drop on the loop, mV
OBJECT-TYPE    
  INTEGER 0..99999  

npCurLoopR 1.3.6.1.4.1.25728.8300.1.1.5
Resistance of the loop, Ohm
OBJECT-TYPE    
  INTEGER 0..99999  

npCurLoopPower 1.3.6.1.4.1.25728.8300.1.1.7
Control of loop power 0=Off, 1=On, 2=reset by off/on power
OBJECT-TYPE    
  INTEGER off(0), on(1), cyclePower(2)  

npRelHumidity 1.3.6.1.4.1.25728.8400
OBJECT IDENTIFIER    

npRelHumSensor 1.3.6.1.4.1.25728.8400.2
OBJECT IDENTIFIER    

npRelHumSensorStatus 1.3.6.1.4.1.25728.8400.2.3
Status of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected
OBJECT-TYPE    
  INTEGER ok(0), error(1)  

npRelHumSensorValueH 1.3.6.1.4.1.25728.8400.2.2
Relative humidity value, %
OBJECT-TYPE    
  INTEGER 0..100  

npRelHumSensorValueT 1.3.6.1.4.1.25728.8400.2.4
Sensor temperature, deg.C
OBJECT-TYPE    
  INTEGER -60..200