DISK-MIB

File: DISK-MIB.mib (5075 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
BLUECOAT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 TEXTUAL-CONVENTION
TimeStamp TruthValue DisplayString
MODULE-COMPLIANCE OBJECT-GROUP blueCoatMgmt

Defined Types

DiskStatus  
Indicates the operational status of the disk. present means the agent disk is operational. initializing the disk is being formatted by the device for use. inserted the disk has been inserted into the device. offline the disk has been taken offline by the system. removed the disk is being removed from the drive slot. not-present no disk is present in drive slot. empty the drive slot is not in use. bad the drive is in an error state unknown cannot determine disk status.
TEXTUAL-CONVENTION    
  INTEGER present(1), initializing(2), inserted(3), offline(4), removed(5), not-present(6), empty(7), bad(8), unknown(9)  

DeviceDiskValueEntry  
SEQUENCE    
  deviceDiskIndex INTEGER
  deviceDiskTrapEnabled TruthValue
  deviceDiskStatus DiskStatus
  deviceDiskTimeStamp TimeStamp
  deviceDiskVendor DisplayString
  deviceDiskProduct DisplayString
  deviceDiskRevision DisplayString
  deviceDiskSerialN DisplayString
  deviceDiskBlockSize Counter32
  deviceDiskBlockCount Counter32

Defined Values

deviceDiskMIB 1.3.6.1.4.1.3417.2.2
The deviceDiskMIB is used to monitor the status of the device disks
MODULE-IDENTITY    

deviceDiskMIBObjects 1.3.6.1.4.1.3417.2.2.1
OBJECT IDENTIFIER    

deviceDiskMIBNotifications 1.3.6.1.4.1.3417.2.2.2
OBJECT IDENTIFIER    

deviceDiskMIBNotificationsPrefix 1.3.6.1.4.1.3417.2.2.2.0
OBJECT IDENTIFIER    

deviceDiskValues 1.3.6.1.4.1.3417.2.2.1.1
OBJECT IDENTIFIER    

deviceDiskValueTable 1.3.6.1.4.1.3417.2.2.1.1.1
Table of disks.
OBJECT-TYPE    
  SEQUENCE OF  
    DeviceDiskValueEntry

deviceDiskValueEntry 1.3.6.1.4.1.3417.2.2.1.1.1.1
An deviceDiskValueTable entry describes the characteristics and operational status of a disk.
OBJECT-TYPE    
  DeviceDiskValueEntry  

deviceDiskIndex 1.3.6.1.4.1.3417.2.2.1.1.1.1.1
An arbitrary value which uniquely identifies the disk.
OBJECT-TYPE    
  INTEGER 1..2147483647  

deviceDiskTrapEnabled 1.3.6.1.4.1.3417.2.2.1.1.1.1.2
This variable controls generation of deviceDiskTrap for this disk. When this variable is true(1), generation of deviceDiskTrap is enabled. When this variable is false(2), generation of deviceDiskTrap is disabled. The default start-up value is true(1).
OBJECT-TYPE    
  TruthValue  

deviceDiskStatus 1.3.6.1.4.1.3417.2.2.1.1.1.1.3
This variable indicates the present operational status of the disk.
OBJECT-TYPE    
  DiskStatus  

deviceDiskTimeStamp 1.3.6.1.4.1.3417.2.2.1.1.1.1.4
This variable indicates when the value of deviceDiskStatus was last reported.
OBJECT-TYPE    
  TimeStamp  

deviceDiskVendor 1.3.6.1.4.1.3417.2.2.1.1.1.1.5
The Vendor name.
OBJECT-TYPE    
  DisplayString  

deviceDiskProduct 1.3.6.1.4.1.3417.2.2.1.1.1.1.6
The product name.
OBJECT-TYPE    
  DisplayString  

deviceDiskRevision 1.3.6.1.4.1.3417.2.2.1.1.1.1.7
Revision code.
OBJECT-TYPE    
  DisplayString  

deviceDiskSerialN 1.3.6.1.4.1.3417.2.2.1.1.1.1.8
Serial number of disk.
OBJECT-TYPE    
  DisplayString  

deviceDiskBlockSize 1.3.6.1.4.1.3417.2.2.1.1.1.1.9
Block size drive has been formatted to in bytes.
OBJECT-TYPE    
  Counter32  

deviceDiskBlockCount 1.3.6.1.4.1.3417.2.2.1.1.1.1.10
The number of blocks on the drive.
OBJECT-TYPE    
  Counter32  

deviceDiskTrap 1.3.6.1.4.1.3417.2.2.2.0.1
The disk status warrants a notification.
NOTIFICATION-TYPE