DGS3426G-L2MGMT-MIB

File: DGS3426G-L2MGMT-MIB.mib (124791 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
DLINK-ID-REC-MIB SW34XXPRIMGMT-MIB

Imported symbols

IpAddress TimeTicks Integer32
MODULE-IDENTITY OBJECT-TYPE DisplayString
RowStatus Counter AgentNotifyLevel
TEXTUAL-CONVENTION dgs3426g

Defined Types

MacAddress  
OCTET STRING Size(6)    

VlanId  
INTEGER 1..4094    

PortList  
OCTET STRING Size(0..127)    

IANAifMauAutoNegCapBits  
This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable.
TEXTUAL-CONVENTION    
  BITS bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15)  

SwDevModuleInfoEntry  
SEQUENCE    
  swDevModuleInfoUnitID INTEGER
  swDevModuleInfoModuleID INTEGER
  swDevModuleInfoModuleName DisplayString
  swDevModuleInfoReversion DisplayString
  swDevModuleInfoSerial DisplayString
  swDevModuleInfoDescription DisplayString

SwL2MultiFilterEntry  
SEQUENCE    
  swL2MultiFilterVid INTEGER
  swL2MultiFilterMode INTEGER

SwL2PortInfoEntry  
SEQUENCE    
  swL2PortInfoPortIndex INTEGER
  swL2PortInfoMediumType INTEGER
  swL2PortInfoUnitID INTEGER
  swL2PortInfoType INTEGER
  swL2PortInfoLinkStatus INTEGER
  swL2PortInfoNwayStatus INTEGER
  swL2PortInfoErrDisReason INTEGER

SwL2PortCtrlEntry  
SEQUENCE    
  swL2PortCtrlPortIndex INTEGER
  swL2PortCtrlMediumType INTEGER
  swL2PortCtrlUnitIndex INTEGER
  swL2PortCtrlAdminState INTEGER
  swL2PortCtrlNwayState INTEGER
  swL2PortCtrlFlowCtrlState INTEGER
  swL2PortCtrlLockState INTEGER
  swL2PortCtrlMACNotifyState INTEGER
  swL2PortCtrlAutoNegRestart INTEGER
  swL2PortCtrlAutoNegCapAdvertisedBits IANAifMauAutoNegCapBits

SwL2PortCounterCtrlEntry  
SEQUENCE    
  swL2PortCounterCtrlPortIndex INTEGER
  swL2PortCounterClearCtrl INTEGER

SwL2PortAutoNegInfoEntry  
SEQUENCE    
  swL2PortAutoNegInfoPortIndex INTEGER
  swL2PortAutoNegInfoAdminStatus INTEGER
  swL2PortAutoNegInfoCapabilityBits IANAifMauAutoNegCapBits
  swL2PortAutoNegInfoCapAdvertisedBits IANAifMauAutoNegCapBits
  swL2PortAutoNegInfoCapReceivedBits IANAifMauAutoNegCapBits

SwL2PortDropCounterEntry  
SEQUENCE    
  swL2PortDropCounterPortIndex INTEGER
  swL2PortBufferFullDrops Counter
  swL2PortACLDrops Counter
  swL2PortMulticastDrops Counter
  swL2PortVLANIngressDrops Counter

SwL2QOSBandwidthControlEntry  
SEQUENCE    
  swL2QOSBandwidthPortIndex INTEGER
  swL2QOSBandwidthRxRate INTEGER
  swL2QOSBandwidthTxRate INTEGER
  swL2QOSBandwidthRadiusRxRate INTEGER
  swL2QOSBandwidthRadiusTxRate INTEGER

SwL2QOSSchedulingEntry  
SEQUENCE    
  swL2QOSSchedulingClassIndex INTEGER
  swL2QOSSchedulingMaxPkts INTEGER
  swL2QOSSchedulingMechanism INTEGER

SwL2QOS8021pUserPriorityEntry  
SEQUENCE    
  swL2QOS8021pUserPriorityIndex INTEGER
  swL2QOS8021pUserPriorityClass INTEGER

SwL2QOS8021pDefaultPriorityEntry  
SEQUENCE    
  swL2QOS8021pDefaultPriorityIndex INTEGER
  swL2QOS8021pDefaultPriority INTEGER
  swL2QOS8021pRadiusPriority INTEGER

SwL2PortSecurityControlEntry  
SEQUENCE    
  swL2PortSecurityPortIndex INTEGER
  swL2PortSecurityMaxLernAddr INTEGER
  swL2PortSecurityMode INTEGER
  swL2PortSecurityAdmState INTEGER

SwL2TrunkCtrlEntry  
SEQUENCE    
  swL2TrunkIndex INTEGER
  swL2TrunkName DisplayString
  swL2TrunkMasterPort INTEGER
  swL2TrunkMember PortList
  swL2TrunkFloodingPort INTEGER
  swL2TrunkType INTEGER
  swL2TrunkState RowStatus
  swL2TrunkActivePorts PortList

SwL2TrunkLACPPortEntry  
SEQUENCE    
  swL2TrunkLACPPortIndex INTEGER
  swL2TrunkLACPPortState INTEGER

SwL2IGMPCtrlEntry  
SEQUENCE    
  swL2IGMPCtrlVid INTEGER
  swL2IGMPQueryInterval INTEGER
  swL2IGMPMaxResponseTime INTEGER
  swL2IGMPRobustness INTEGER
  swL2IGMPLastMemberQueryInterval INTEGER
  swL2IGMPHostTimeout INTEGER
  swL2IGMPRouteTimeout INTEGER
  swL2IGMPLeaveTimer INTEGER
  swL2IGMPQueryState INTEGER
  swL2IGMPCurrentState INTEGER
  swL2IGMPCtrlState INTEGER
  swL2IGMPFastLeaveState INTEGER
  swL2IGMPQueryVersion INTEGER
  swL2IGMPReportSuppression INTEGER

SwL2IGMPQueryInfoEntry  
SEQUENCE    
  swL2IGMPInfoVid INTEGER
  swL2IGMPInfoQueryCount INTEGER
  swL2IGMPInfoTxQueryCount INTEGER

SwL2IGMPInfoEntry  
SEQUENCE    
  swL2IGMPVid INTEGER
  swL2IGMPGroupIpAddr IpAddress
  swL2IGMPMacAddr MacAddress
  swL2IGMPPortMap PortList
  swL2IGMPIpGroupReportCount INTEGER

SwL2IGMPRouterPortsEntry  
SEQUENCE    
  swL2IGMPRouterPortsVid INTEGER
  swL2IGMPRouterStaticPortList PortList
  swL2IGMPRouterDynamicPortList PortList
  swL2IGMPRouterForbiddenPortList PortList

SwIGMPSnoopingGroupEntry  
SEQUENCE    
  swIGMPSnoopingGroupVid INTEGER
  swIGMPSnoopingGroupGroupAddr IpAddress
  swIGMPSnoopingGroupSourceAddr IpAddress
  swIGMPSnoopingGroupIncludePortMap PortList
  swIGMPSnoopingGroupExcludePortMap PortList

SwL2IGMPMulticastVlanEntry  
SEQUENCE    
  swL2IGMPMulticastVlanid INTEGER
  swL2IGMPMulticastVlanName DisplayString
  swL2IGMPMulticastVlanSourcePort PortList
  swL2IGMPMulticastVlanMemberPort PortList
  swL2IGMPMulticastVlanTagMemberPort PortList
  swL2IGMPMulticastVlanState INTEGER
  swL2IGMPMulticastVlanReplaceSourceIp IpAddress
  swL2IGMPMulticastVlanRowStatus RowStatus
  swL2IGMPMulticastVlanRemoveAllMcastAddrListAction INTEGER

SwL2IGMPMulticastVlanGroupEntry  
SEQUENCE    
  swL2IGMPMulticastVlanGroupVid INTEGER
  swL2IGMPMulticastVlanGroupFromIp IpAddress
  swL2IGMPMulticastVlanGroupToIp IpAddress
  swL2IGMPMulticastVlanGroupStatus RowStatus

SwL2IGMPSnoopingStaticGroupEntry  
SEQUENCE    
  swL2IGMPSnoopingStaticGroupVID INTEGER
  swL2IGMPSnoopingStaticGroupIPaddress IpAddress
  swL2IGMPSnoopingStaticGroupMemberPortList PortList
  swL2IGMPSnoopingStaticGroupRowStatus RowStatus

SwL2TrafficSegEntry  
SEQUENCE    
  swL2TrafficSegPort INTEGER
  swL2TrafficSegForwardPorts PortList

SwL2IpLimitedMulticastEntry  
SEQUENCE    
  swL2IpLimitedMulticastPortIndex INTEGER
  swL2IpLimitedMulticastHead IpAddress
  swL2IpLimitedMulticastTail IpAddress
  swL2IpLimitedMulticastAccess INTEGER
  swL2IpLimitedMulticastState INTEGER
  swL2IpLimitedMulticastDelState INTEGER

SwL2VlanEntry  
SEQUENCE    
  swL2VlanIndex VlanId
  swL2VlanName DisplayString
  swL2VlanType INTEGER
  swL2VlanMemberPorts PortList
  swL2VlanStaticPorts PortList
  swL2VlanStaticTaggedPorts PortList
  swL2VlanStaticUntaggedPorts PortList
  swL2VlanForbiddenPorts PortList
  swL2VlanCurrentTaggedPorts PortList
  swL2VlanCurrentUntaggedPorts PortList
  swL2VlanAdvertisementState INTEGER

SwL2LoopDetectPortEntry  
SEQUENCE    
  swL2LoopDetectPortIndex INTEGER
  swL2LoopDetectPortState INTEGER
  swL2LoopDetectPortLoopVLAN DisplayString
  swL2LoopDetectPortLoopStatus INTEGER

Defined Values

swL2MgmtMIB 1.3.6.1.4.1.171.11.70.11.2
The Structure of Layer 2 Network Management Information.
MODULE-IDENTITY    

swL2DevMgmt 1.3.6.1.4.1.171.11.70.11.2.1
OBJECT IDENTIFIER    

swL2MultiFilter 1.3.6.1.4.1.171.11.70.11.2.2
OBJECT IDENTIFIER    

swL2PortMgmt 1.3.6.1.4.1.171.11.70.11.2.3
OBJECT IDENTIFIER    

swL2QOSMgmt 1.3.6.1.4.1.171.11.70.11.2.6
OBJECT IDENTIFIER    

swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.70.11.2.7
OBJECT IDENTIFIER    

swL2TrunkMgmt 1.3.6.1.4.1.171.11.70.11.2.9
OBJECT IDENTIFIER    

swL2MirrorMgmt 1.3.6.1.4.1.171.11.70.11.2.10
OBJECT IDENTIFIER    

swL2IGMPMgmt 1.3.6.1.4.1.171.11.70.11.2.11
OBJECT IDENTIFIER    

swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.70.11.2.14
OBJECT IDENTIFIER    

swL2IpLimitedMulticastMgmt 1.3.6.1.4.1.171.11.70.11.2.15
OBJECT IDENTIFIER    

swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.70.11.2.16
OBJECT IDENTIFIER    

swL2VlanMgmt 1.3.6.1.4.1.171.11.70.11.2.17
OBJECT IDENTIFIER    

swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.70.11.2.18
OBJECT IDENTIFIER    

swL2DevInfo 1.3.6.1.4.1.171.11.70.11.2.1.1
OBJECT IDENTIFIER    

swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.70.11.2.1.1.1
The number of ports within this switch. This value is the sum of the ports within this switch.
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.70.11.2.1.1.2
The number of ports in this switch connected to the segment or the end stations.
OBJECT-TYPE    
  INTEGER 0..65535  

swDevModuleInfoTable 1.3.6.1.4.1.171.11.70.11.2.1.1.3
This table contains the module information.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDevModuleInfoEntry

swDevModuleInfoEntry 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1
A list of management information for each unit in the system.
OBJECT-TYPE    
  SwDevModuleInfoEntry  

swDevModuleInfoUnitID 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.1
This object indicates the specific unit ID in the stacking/chassis table.
OBJECT-TYPE    
  INTEGER 1..12  

swDevModuleInfoModuleID 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.2
This object indicates the module ID of this unit.
OBJECT-TYPE    
  INTEGER 1..8  

swDevModuleInfoModuleName 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.3
A textual string containing name of the the module.
OBJECT-TYPE    
  DisplayString Size(0..15)  

swDevModuleInfoReversion 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.4
A textual string containing reversion of the module.
OBJECT-TYPE    
  DisplayString Size(0..4)  

swDevModuleInfoSerial 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.5
A textual string containing serial of the module.
OBJECT-TYPE    
  DisplayString Size(0..15)  

swDevModuleInfoDescription 1.3.6.1.4.1.171.11.70.11.2.1.1.3.1.6
A textual string containing description of the module.
OBJECT-TYPE    
  DisplayString Size(0..32)  

swDevInfoBootPromVersion 1.3.6.1.4.1.171.11.70.11.2.1.1.4
Boot Prom Version.
OBJECT-TYPE    
  DisplayString Size(0..255)  

swDevInfoFirmwareVersion 1.3.6.1.4.1.171.11.70.11.2.1.1.5
Firmware Version.
OBJECT-TYPE    
  DisplayString Size(0..255)  

swDevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.70.11.2.1.1.6
This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps. The four remaining bits are currently unused and must be 0.
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

swL2DevCtrl 1.3.6.1.4.1.171.11.70.11.2.1.2
OBJECT IDENTIFIER    

swL2DevCtrlStpState 1.3.6.1.4.1.171.11.70.11.2.1.2.1
This object can be enabled or disabled spanning tree algorithm during runtime of the system.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.70.11.2.1.2.2
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIGMPSnoopingMcstRTOnly 1.3.6.1.4.1.171.11.70.11.2.1.2.3
Tok_String
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.70.11.2.1.2.4
This object can be enabled or disabled RMON.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.70.11.2.1.2.5
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
OBJECT-TYPE    
  INTEGER normal(1), active(2)  

swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.70.11.2.1.2.6
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system .
OBJECT-TYPE    
  VlanId  

swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.70.11.2.1.2.7
This object controls which Vlan includes system ip. And the Vlan should have been created.
OBJECT-TYPE    
  VlanId  

swL2MACNotifyState 1.3.6.1.4.1.171.11.70.11.2.1.2.8
This object can enabled or disabled MAC Notification.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.70.11.2.1.2.9
This object indicates the history size of variation MAC in address table. The default value is 1 .
OBJECT-TYPE    
  INTEGER 1..500  

swL2MACNotifyInterval 1.3.6.1.4.1.171.11.70.11.2.1.2.10
This object indicates the time interval in second for trigger the MAC notify message.
OBJECT-TYPE    
  INTEGER 1..2147483647  

swL2DevCtrlWeb 1.3.6.1.4.1.171.11.70.11.2.1.2.13
OBJECT IDENTIFIER    

swL2DevCtrlWebState 1.3.6.1.4.1.171.11.70.11.2.1.2.13.1
This object control web status.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.70.11.2.1.2.13.2
This object can designate tcp port. When web disable this object can't accessible.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.70.11.2.1.2.14
OBJECT IDENTIFIER    

swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.70.11.2.1.2.14.1
This object control telnet status.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.70.11.2.1.2.14.2
This object can designate tcp port. When telnet disable this object can't accessible.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2DevCtrlIpAutoconfig 1.3.6.1.4.1.171.11.70.11.2.1.2.15
Tok_String
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlClipagingState 1.3.6.1.4.1.171.11.70.11.2.1.2.17
Tok_String
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.70.11.2.1.2.18
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.70.11.2.1.2.19
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevAlarm 1.3.6.1.4.1.171.11.70.11.2.1.3
OBJECT IDENTIFIER    

swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.70.11.2.1.3.1
When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap.
OBJECT-TYPE    
  INTEGER disabled(2), enabled(3)  

swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.70.11.2.1.3.2
This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other.
OBJECT-TYPE    
  INTEGER disabled(2), enabled(3)  

swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.11.2.1.3.3
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other.
OBJECT-TYPE    
  INTEGER disabled(2), enabled(3)  

swL2MultiFilterTable 1.3.6.1.4.1.171.11.70.11.2.2.1
A table that contains infomation about vlan multicast filter mode.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MultiFilterEntry

swL2MultiFilterEntry 1.3.6.1.4.1.171.11.70.11.2.2.1.1
A list of multicast filter mode information for each vlan.
OBJECT-TYPE    
  SwL2MultiFilterEntry  

swL2MultiFilterVid 1.3.6.1.4.1.171.11.70.11.2.2.1.1.1
vid for each vlan
OBJECT-TYPE    
  INTEGER 1..65535  

swL2MultiFilterMode 1.3.6.1.4.1.171.11.70.11.2.2.1.1.2
vlan multicast filter mode.
OBJECT-TYPE    
  INTEGER forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)  

swL2PortInfoTable 1.3.6.1.4.1.171.11.70.11.2.3.1
A table that contains information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortInfoEntry

swL2PortInfoEntry 1.3.6.1.4.1.171.11.70.11.2.3.1.1
A list of information for each port of the device.
OBJECT-TYPE    
  SwL2PortInfoEntry  

swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.70.11.2.3.1.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoMediumType 1.3.6.1.4.1.171.11.70.11.2.3.1.1.2
Indicates medium type of the port number.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortInfoUnitID 1.3.6.1.4.1.171.11.70.11.2.3.1.1.3
Indicates ID of the unit in the system
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoType 1.3.6.1.4.1.171.11.70.11.2.3.1.1.4
This object indicates the connector type of this port.
OBJECT-TYPE    
  INTEGER portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10)  

swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.70.11.2.3.1.1.5
This object indicates the port link status.
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.70.11.2.3.1.1.6
This object indicates the port speed and duplex mode.
OBJECT-TYPE    
  INTEGER link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18)  

swL2PortInfoErrDisReason 1.3.6.1.4.1.171.11.70.11.2.3.1.1.7
This object indicates the port if disabled and why error disabled.
OBJECT-TYPE    
  INTEGER err-none(1), storm-control(2), lbd-control(3)  

swL2PortCtrlTable 1.3.6.1.4.1.171.11.70.11.2.3.2
A table that contains control information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCtrlEntry

swL2PortCtrlEntry 1.3.6.1.4.1.171.11.70.11.2.3.2.1
A list of control information for each port of the device.
OBJECT-TYPE    
  SwL2PortCtrlEntry  

swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.70.11.2.3.2.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlMediumType 1.3.6.1.4.1.171.11.70.11.2.3.2.1.2
Indicates medium type of the port number.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.70.11.2.3.2.1.3
Indicates ID of the unit in the device
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.70.11.2.3.2.1.4
This object decide the port enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.70.11.2.3.2.1.5
Chose the port speed, duplex mode, and N-Way function mode.
OBJECT-TYPE    
  INTEGER other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10)  

swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.70.11.2.3.2.1.6
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlLockState 1.3.6.1.4.1.171.11.70.11.2.3.2.1.7
This object decide the port is locked or not.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.70.11.2.3.2.1.8
This object set each poet MAC notification state.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlAutoNegRestart 1.3.6.1.4.1.171.11.70.11.2.3.2.1.11
If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect.
OBJECT-TYPE    
  INTEGER restart(1), norestart(2)  

swL2PortCtrlAutoNegCapAdvertisedBits 1.3.6.1.4.1.171.11.70.11.2.3.2.1.12
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
OBJECT-TYPE    
  IANAifMauAutoNegCapBits  

swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.70.11.2.3.3
This object configure the switch's jumbo frame settings.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlJumboFrameMaxSize 1.3.6.1.4.1.171.11.70.11.2.3.4
This object describes how many bytes the max jumbo frame is.
OBJECT-TYPE    
  INTEGER  

swL2PortCounterCtrlTable 1.3.6.1.4.1.171.11.70.11.2.3.6
A table that is used to clear counter information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCounterCtrlEntry

swL2PortCounterCtrlEntry 1.3.6.1.4.1.171.11.70.11.2.3.6.1
A list of entries used to clear the counter information for each port of the device.
OBJECT-TYPE    
  SwL2PortCounterCtrlEntry  

swL2PortCounterCtrlPortIndex 1.3.6.1.4.1.171.11.70.11.2.3.6.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCounterClearCtrl 1.3.6.1.4.1.171.11.70.11.2.3.6.1.2
This object indicates whether to clear the counters for each port of the device or not.
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2PortAutoNegInfoTable 1.3.6.1.4.1.171.11.70.11.2.3.8
A table that contains information about every port's auto negotiation status.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortAutoNegInfoEntry

swL2PortAutoNegInfoEntry 1.3.6.1.4.1.171.11.70.11.2.3.8.1
A list of information for each port auto negotiation of the device.
OBJECT-TYPE    
  SwL2PortAutoNegInfoEntry  

swL2PortAutoNegInfoPortIndex 1.3.6.1.4.1.171.11.70.11.2.3.8.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortAutoNegInfoAdminStatus 1.3.6.1.4.1.171.11.70.11.2.3.8.1.2
If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2PortAutoNegInfoCapabilityBits 1.3.6.1.4.1.171.11.70.11.2.3.8.1.3
A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
OBJECT-TYPE    
  IANAifMauAutoNegCapBits  

swL2PortAutoNegInfoCapAdvertisedBits 1.3.6.1.4.1.171.11.70.11.2.3.8.1.4
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
OBJECT-TYPE    
  IANAifMauAutoNegCapBits  

swL2PortAutoNegInfoCapReceivedBits 1.3.6.1.4.1.171.11.70.11.2.3.8.1.5
A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
OBJECT-TYPE    
  IANAifMauAutoNegCapBits  

swL2PortDropCounterTable 1.3.6.1.4.1.171.11.70.11.2.3.9
A table that contains information for each port drop counter.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortDropCounterEntry

swL2PortDropCounterEntry 1.3.6.1.4.1.171.11.70.11.2.3.9.1
A list of information for each port auto negotiation of the device.
OBJECT-TYPE    
  SwL2PortDropCounterEntry  

swL2PortDropCounterPortIndex 1.3.6.1.4.1.171.11.70.11.2.3.9.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortBufferFullDrops 1.3.6.1.4.1.171.11.70.11.2.3.9.1.2
The total number of packets discarded while buffer full.
OBJECT-TYPE    
  Counter  

swL2PortACLDrops 1.3.6.1.4.1.171.11.70.11.2.3.9.1.3
The total number of packets denied by ACLs.
OBJECT-TYPE    
  Counter  

swL2PortMulticastDrops 1.3.6.1.4.1.171.11.70.11.2.3.9.1.4
The total number of multicast packet that is discarded.
OBJECT-TYPE    
  Counter  

swL2PortVLANIngressDrops 1.3.6.1.4.1.171.11.70.11.2.3.9.1.5
The total number of packets discarded by VLAN ingress checking.
OBJECT-TYPE    
  Counter  

swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.70.11.2.6.1
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSBandwidthControlEntry

swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.70.11.2.6.1.1
A list of information contained in swL2QOSBandwidthControlTable.
OBJECT-TYPE    
  SwL2QOSBandwidthControlEntry  

swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.70.11.2.6.1.1.1
Indicates the port .
OBJECT-TYPE    
  INTEGER 1..768  

swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.70.11.2.6.1.1.2
Indicates RX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit.
OBJECT-TYPE    
  INTEGER 64..10000000  

swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.70.11.2.6.1.1.3
Indicates TX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit.
OBJECT-TYPE    
  INTEGER 64..10000000  

swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.70.11.2.6.1.1.4
The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate.
OBJECT-TYPE    
  INTEGER  

swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.70.11.2.6.1.1.5
The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate.
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.70.11.2.6.2
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSSchedulingEntry

swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.70.11.2.6.2.1
A list of information contained in swL2QOSSchedulingTable.
OBJECT-TYPE    
  SwL2QOSSchedulingEntry  

swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.70.11.2.6.2.1.1
Indicates the hardware queue number.
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.70.11.2.6.2.1.2
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.
OBJECT-TYPE    
  INTEGER 0..15  

swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.70.11.2.6.2.1.3
Indicates the mechanism of QOS scheduling.
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2), weightfair(3)  

swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.70.11.2.6.3
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pUserPriorityEntry

swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.70.11.2.6.3.1
A list of information contained in swL2QOS8021pUserPriorityTable.
OBJECT-TYPE    
  SwL2QOS8021pUserPriorityEntry  

swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.70.11.2.6.3.1.1
The 802.1p user priority .
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.70.11.2.6.3.1.2
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
OBJECT-TYPE    
  INTEGER 0..6  

swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.70.11.2.6.4
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pDefaultPriorityEntry

swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.70.11.2.6.4.1
A list of information contained in swL2QOS8021pDefaultPriorityTable.
OBJECT-TYPE    
  SwL2QOS8021pDefaultPriorityEntry  

swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.70.11.2.6.4.1.1
Indicates the port number .
OBJECT-TYPE    
  INTEGER 1..768  

swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.70.11.2.6.4.1.2
The priority value to assign to untagged packets received by the switch ports on the switch..
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.70.11.2.6.4.1.3
The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.70.11.2.6.5
This object can control QOS scheduling Mechanism.
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2), weightfair(3)  

swL2QOSHolPreventionCtrl 1.3.6.1.4.1.171.11.70.11.2.6.6
Control QOS Hol Prevention
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.70.11.2.7.1
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortSecurityControlEntry

swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.70.11.2.7.1.1
A list of information contained in swL2PortSecurityControlTable.
OBJECT-TYPE    
  SwL2PortSecurityControlEntry  

swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.70.11.2.7.1.1.1
Indicates the secured port to lock address learning.
OBJECT-TYPE    
  INTEGER 1..768  

swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.70.11.2.7.1.1.2
Indicates allowable number of addresses to be learned at this port.
OBJECT-TYPE    
  INTEGER 0..16  

swL2PortSecurityMode 1.3.6.1.4.1.171.11.70.11.2.7.1.1.3
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(4) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion.
OBJECT-TYPE    
  INTEGER other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)  

swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.70.11.2.7.1.1.4
Indicates administration state of locking address.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.70.11.2.7.2
OBJECT IDENTIFIER    

swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.70.11.2.7.2.1
Indicates vlan name.
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.70.11.2.7.2.2
Indicates the port.0 indicated the function isn't working now.
OBJECT-TYPE    
  INTEGER 0..768  

swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.70.11.2.7.2.3
Specifies MAC address.
OBJECT-TYPE    
  MacAddress  

swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.70.11.2.7.2.4
.
OBJECT-TYPE    
  INTEGER none(1), start(2)  

swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.70.11.2.9.1
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.70.11.2.9.2
Current actived number of entries in the trunk configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.70.11.2.9.3
This table specifys which ports group a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkCtrlEntry

swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.70.11.2.9.3.1
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SwL2TrunkCtrlEntry  

swL2TrunkIndex 1.3.6.1.4.1.171.11.70.11.2.9.3.1.1
The index of logical port trunk. The trunk group number depend on the existence of unit and module.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkName 1.3.6.1.4.1.171.11.70.11.2.9.3.1.2
The name of logical port trunk.
OBJECT-TYPE    
  DisplayString Size(0..12)  

swL2TrunkMasterPort 1.3.6.1.4.1.171.11.70.11.2.9.3.1.3
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkMember 1.3.6.1.4.1.171.11.70.11.2.9.3.1.4
Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks.
OBJECT-TYPE    
  PortList  

swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.70.11.2.9.3.1.5
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkType 1.3.6.1.4.1.171.11.70.11.2.9.3.1.6
This object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group .
OBJECT-TYPE    
  INTEGER other(1), static(2), lacp(3)  

swL2TrunkState 1.3.6.1.4.1.171.11.70.11.2.9.3.1.7
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2TrunkActivePorts 1.3.6.1.4.1.171.11.70.11.2.9.3.1.8
The object indicates the active ports of the port trunk entry.
OBJECT-TYPE    
  PortList  

swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.70.11.2.9.4
This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
OBJECT-TYPE    
  INTEGER other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7)  

swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.70.11.2.9.5
This table specifys which ports group a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkLACPPortEntry

swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.70.11.2.9.5.1
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SwL2TrunkLACPPortEntry  

swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.70.11.2.9.5.1.1
The index of logical port lacp.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.70.11.2.9.5.1.2
The state of logical port lacp.
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.70.11.2.10.1
This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.70.11.2.10.2
The represent the ingress into the source port packet to sniffed.
OBJECT-TYPE    
  PortList  

swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.70.11.2.10.3
The represent the egress from the source port packet to sniffed.
OBJECT-TYPE    
  PortList  

swL2MirrorPortState 1.3.6.1.4.1.171.11.70.11.2.10.4
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.70.11.2.11.1
Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.70.11.2.11.2
Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.70.11.2.11.3
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPCtrlEntry

swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.70.11.2.11.3.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
OBJECT-TYPE    
  SwL2IGMPCtrlEntry  

swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.70.11.2.11.3.1.1
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.70.11.2.11.3.1.2
The frequency at which IGMP Host-Query packets are transmitted on this switch.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.70.11.2.11.3.1.3
The maximum query response time on this switch.
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPRobustness 1.3.6.1.4.1.171.11.70.11.2.11.3.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
OBJECT-TYPE    
  INTEGER 1..255  

swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.70.11.2.11.3.1.5
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.70.11.2.11.3.1.6
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997.
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.70.11.2.11.3.1.7
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.70.11.2.11.3.1.8
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPQueryState 1.3.6.1.4.1.171.11.70.11.2.11.3.1.9
This object decide the IGMP query enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPCurrentState 1.3.6.1.4.1.171.11.70.11.2.11.3.1.10
This object indicates the current IGMP query state.
OBJECT-TYPE    
  INTEGER other(1), querier(2), non-querier(3)  

swL2IGMPCtrlState 1.3.6.1.4.1.171.11.70.11.2.11.3.1.11
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry.
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.70.11.2.11.3.1.12
This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for this entry. enable(3) - IGMP fast-leave funtion is enabled for this entry.
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPQueryVersion 1.3.6.1.4.1.171.11.70.11.2.11.3.1.13
Configure the IGMP version of query packet which will be sent by the router.
OBJECT-TYPE    
  INTEGER 1..3  

swL2IGMPReportSuppression 1.3.6.1.4.1.171.11.70.11.2.11.3.1.15
When enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.70.11.2.11.4
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPQueryInfoEntry

swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.70.11.2.11.4.1
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
OBJECT-TYPE    
  SwL2IGMPQueryInfoEntry  

swL2IGMPInfoVid 1.3.6.1.4.1.171.11.70.11.2.11.4.1.1
This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.70.11.2.11.4.1.2
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.70.11.2.11.4.1.3
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTable 1.3.6.1.4.1.171.11.70.11.2.11.5
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPInfoEntry

swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.70.11.2.11.5.1
Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
OBJECT-TYPE    
  SwL2IGMPInfoEntry  

swL2IGMPVid 1.3.6.1.4.1.171.11.70.11.2.11.5.1.1
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.70.11.2.11.5.1.2
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
OBJECT-TYPE    
  IpAddress  

swL2IGMPMacAddr 1.3.6.1.4.1.171.11.70.11.2.11.5.1.3
This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.
OBJECT-TYPE    
  MacAddress  

swL2IGMPPortMap 1.3.6.1.4.1.171.11.70.11.2.11.5.1.4
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero.
OBJECT-TYPE    
  PortList  

swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.70.11.2.11.5.1.5
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPRouterPortsTable 1.3.6.1.4.1.171.11.70.11.2.11.6
The table controls the Vlan's IGMP router ports function.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPRouterPortsEntry

swL2IGMPRouterPortsEntry 1.3.6.1.4.1.171.11.70.11.2.11.6.1
The entry in IGMP router ports table (swL2IGMPRouterPortsTable).
OBJECT-TYPE    
  SwL2IGMPRouterPortsEntry  

swL2IGMPRouterPortsVid 1.3.6.1.4.1.171.11.70.11.2.11.6.1.1
This object indicates the IGMP router ports entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP ports Table.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPRouterStaticPortList 1.3.6.1.4.1.171.11.70.11.2.11.6.1.2
Tok_String
OBJECT-TYPE    
  PortList  

swL2IGMPRouterDynamicPortList 1.3.6.1.4.1.171.11.70.11.2.11.6.1.3
Tok_String
OBJECT-TYPE    
  PortList  

swL2IGMPRouterForbiddenPortList 1.3.6.1.4.1.171.11.70.11.2.11.6.1.4
Tok_String
OBJECT-TYPE    
  PortList  

swIGMPSnoopingGroupTable 1.3.6.1.4.1.171.11.70.11.2.11.11
The table contains the current IGMP snooping group information captured by the device.
OBJECT-TYPE    
  SEQUENCE OF  
    SwIGMPSnoopingGroupEntry

swIGMPSnoopingGroupEntry 1.3.6.1.4.1.171.11.70.11.2.11.11.1
Information about the current IGMP snooping group information which has been captured by the device.
OBJECT-TYPE    
  SwIGMPSnoopingGroupEntry  

swIGMPSnoopingGroupVid 1.3.6.1.4.1.171.11.70.11.2.11.11.1.1
This object indicates the VID of the individual IGMP snooping group table entry.
OBJECT-TYPE    
  INTEGER 1..4094  

swIGMPSnoopingGroupGroupAddr 1.3.6.1.4.1.171.11.70.11.2.11.11.1.2
This object identifies the group IP address which have been captured from the IGMP packet, on a per-VLAN basis.
OBJECT-TYPE    
  IpAddress  

swIGMPSnoopingGroupSourceAddr 1.3.6.1.4.1.171.11.70.11.2.11.11.1.3
This object identifies the source addresses.
OBJECT-TYPE    
  IpAddress  

swIGMPSnoopingGroupIncludePortMap 1.3.6.1.4.1.171.11.70.11.2.11.11.1.4
This object indicates the port list under INCLUDE mode.
OBJECT-TYPE    
  PortList  

swIGMPSnoopingGroupExcludePortMap 1.3.6.1.4.1.171.11.70.11.2.11.11.1.5
This object indicates the port list under EXCLUDE mode.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.70.11.2.11.7
The information of the IGMP snooping multicast VLAN table.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanEntry

swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.70.11.2.11.7.1
The entry of swL2IGMPMulticastVlanTable.
OBJECT-TYPE    
  SwL2IGMPMulticastVlanEntry  

swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.70.11.2.11.7.1.1
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
OBJECT-TYPE    
  INTEGER 2..4094  

swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.70.11.2.11.7.1.2
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.70.11.2.11.7.1.3
This object indicate the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.70.11.2.11.7.1.4
This object indicate the portlist of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.70.11.2.11.7.1.5
This object indicate the portlist of the tag member ports of IGMP snooping multicast VLAN.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.70.11.2.11.7.1.6
This object can be enabled or disabled IGMP_snooping multicast VLAN.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.11.70.11.2.11.7.1.7
The replace source IP of this multicast vlan.
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.70.11.2.11.7.1.8
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2IGMPMulticastVlanRemoveAllMcastAddrListAction 1.3.6.1.4.1.171.11.70.11.2.11.7.1.9
This object indicates if remove all the multicast address list from the IGMP multicast VLAN or not.
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.70.11.2.11.8
The table containing the IGMP snooping multicast VLAN group information
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanGroupEntry

swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.70.11.2.11.8.1
Information about current IGMP snooping multicast VLAN group.
OBJECT-TYPE    
  SwL2IGMPMulticastVlanGroupEntry  

swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.70.11.2.11.8.1.1
This object indicates the Vid of IGMP snooping multicast VLAN group.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMulticastVlanGroupFromIp 1.3.6.1.4.1.171.11.70.11.2.11.8.1.2
Specifies the multicast address list for this VLAN.
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupToIp 1.3.6.1.4.1.171.11.70.11.2.11.8.1.3
Specifies the multicast address list for this VLAN.
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupStatus 1.3.6.1.4.1.171.11.70.11.2.11.8.1.4
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2IGMPSnoopingStaticGroupTable 1.3.6.1.4.1.171.11.70.11.2.11.16
The table contains the current IGMP snooping static group information captured by the device.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPSnoopingStaticGroupEntry

swL2IGMPSnoopingStaticGroupEntry 1.3.6.1.4.1.171.11.70.11.2.11.16.1
Information about current IGMP snooping static group information captured by the device.
OBJECT-TYPE    
  SwL2IGMPSnoopingStaticGroupEntry  

swL2IGMPSnoopingStaticGroupVID 1.3.6.1.4.1.171.11.70.11.2.11.16.1.1
This object indicates the VID of the current IGMP snooping static group.
OBJECT-TYPE    
  INTEGER 1..4094  

swL2IGMPSnoopingStaticGroupIPaddress 1.3.6.1.4.1.171.11.70.11.2.11.16.1.2
This object indicates the current IGMP snooping static group IP address.
OBJECT-TYPE    
  IpAddress  

swL2IGMPSnoopingStaticGroupMemberPortList 1.3.6.1.4.1.171.11.70.11.2.11.16.1.3
This object indicates the current IGMP snooping static group Member Portlist.
OBJECT-TYPE    
  PortList  

swL2IGMPSnoopingStaticGroupRowStatus 1.3.6.1.4.1.171.11.70.11.2.11.16.1.4
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2TrafficSegTable 1.3.6.1.4.1.171.11.70.11.2.14.1
This table specifys the port just can forward traffic to the specific port list.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrafficSegEntry

swL2TrafficSegEntry 1.3.6.1.4.1.171.11.70.11.2.14.1.1
A list of information specifies the port with its traffic forward list.
OBJECT-TYPE    
  SwL2TrafficSegEntry  

swL2TrafficSegPort 1.3.6.1.4.1.171.11.70.11.2.14.1.1.1
The port number of the logical port.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.70.11.2.14.1.1.2
The port list that the specific port can forward traffic.
OBJECT-TYPE    
  PortList  

swL2IpLimitedMulticastTable 1.3.6.1.4.1.171.11.70.11.2.15.1
This entity's per-port Limited IP multicast address range table.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IpLimitedMulticastEntry

swL2IpLimitedMulticastEntry 1.3.6.1.4.1.171.11.70.11.2.15.1.1
A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
OBJECT-TYPE    
  SwL2IpLimitedMulticastEntry  

swL2IpLimitedMulticastPortIndex 1.3.6.1.4.1.171.11.70.11.2.15.1.1.1
A port to config the limited multicast address.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IpLimitedMulticastHead 1.3.6.1.4.1.171.11.70.11.2.15.1.1.2
The head of multicast address range.
OBJECT-TYPE    
  IpAddress  

swL2IpLimitedMulticastTail 1.3.6.1.4.1.171.11.70.11.2.15.1.1.3
The tail of multicast address range.
OBJECT-TYPE    
  IpAddress  

swL2IpLimitedMulticastAccess 1.3.6.1.4.1.171.11.70.11.2.15.1.1.4
It allow you to permit or deny multicast range.
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

swL2IpLimitedMulticastState 1.3.6.1.4.1.171.11.70.11.2.15.1.1.5
Enable or disable limited multicast address for the chosen portlist.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IpLimitedMulticastDelState 1.3.6.1.4.1.171.11.70.11.2.15.1.1.6
Enable or disable delete limited multicast address for the chosen portlist.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

swL2VlanTable 1.3.6.1.4.1.171.11.70.11.2.17.1
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2VlanEntry

swL2VlanEntry 1.3.6.1.4.1.171.11.70.11.2.17.1.1
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
OBJECT-TYPE    
  SwL2VlanEntry  

swL2VlanIndex 1.3.6.1.4.1.171.11.70.11.2.17.1.1.1
The VLAN ID of the VLAN to be created. The range is 1 - 4094.
OBJECT-TYPE    
  VlanId  

swL2VlanName 1.3.6.1.4.1.171.11.70.11.2.17.1.1.2
The name of the VLAN to be displayed.
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2VlanType 1.3.6.1.4.1.171.11.70.11.2.17.1.1.3
The type of the VLAN to be displayed.
OBJECT-TYPE    
  INTEGER invalid-vlan-type(0), static-1q-vlan(1), dynamic-vlan(2), port-base-vlan(3), protocolvlan(4), double-vlan(5)  

swL2VlanMemberPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.4
A range of member ports to the VLAN.
OBJECT-TYPE    
  PortList  

swL2VlanStaticPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.5
A range of static ports to the VLAN.
OBJECT-TYPE    
  PortList  

swL2VlanStaticTaggedPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.6
Specifies the additional ports as tagged.
OBJECT-TYPE    
  PortList  

swL2VlanStaticUntaggedPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.7
Specifies the additional ports as untagged.
OBJECT-TYPE    
  PortList  

swL2VlanForbiddenPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.8
The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
OBJECT-TYPE    
  PortList  

swL2VlanCurrentTaggedPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.9
The set of ports which are transmitting traffic for this VLAN as tagged frames.
OBJECT-TYPE    
  PortList  

swL2VlanCurrentUntaggedPorts 1.3.6.1.4.1.171.11.70.11.2.17.1.1.10
The set of ports which are transmitting traffic for this VLAN as untagged frames.
OBJECT-TYPE    
  PortList  

swL2VlanAdvertisementState 1.3.6.1.4.1.171.11.70.11.2.17.1.1.11
Specifies the VLAN as able to join GVRP If this parameter is not set, the VLAN cannot be configured to have forbidden ports. This flag protocol VLAN is fixed to DISABLE.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PVIDAutoAssignmentState 1.3.6.1.4.1.171.11.70.11.2.17.2
This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change PVID. If 'Auto-assign PVID' is enabled, PVID will be possibly changed by PVID or VLAN configuration. When user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. In the form of VLAN list command, PVID is updated with last item of VLAN list. When user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned with 'default VLAN'.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.70.11.2.18.1
OBJECT IDENTIFIER    

swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.70.11.2.18.1.1
This object indicates the loopback detection status for the system.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectInterval 1.3.6.1.4.1.171.11.70.11.2.18.1.2
This object indicates the interval value, the range is from 1 to 32767 seconds.
OBJECT-TYPE    
  INTEGER 1..32767  

swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.70.11.2.18.1.3
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
OBJECT-TYPE    
  INTEGER 0..1000000  

swL2LoopDetectMode 1.3.6.1.4.1.171.11.70.11.2.18.1.4
This object indicates the loopback detection mode for the system.
OBJECT-TYPE    
  INTEGER vlan-based(1), port-based(2)  

swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.70.11.2.18.1.5
This object indicates the loopback detection trap mode for the system.
OBJECT-TYPE    
  INTEGER none(1), loop-detected(2), loop-cleared(3), both(4)  

swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.70.11.2.18.2
OBJECT IDENTIFIER    

swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.70.11.2.18.2.1
The table specifies the loopback detection function specified by port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2LoopDetectPortEntry

swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.70.11.2.18.2.1.1
The table specifies the loopback detection function specified by port.
OBJECT-TYPE    
  SwL2LoopDetectPortEntry  

swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.70.11.2.18.2.1.1.1
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
OBJECT-TYPE    
  INTEGER 1..65535  

swL2LoopDetectPortState 1.3.6.1.4.1.171.11.70.11.2.18.2.1.1.2
This object indicates the loopback detection function state on the port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectPortLoopVLAN 1.3.6.1.4.1.171.11.70.11.2.18.2.1.1.3
This object indicates the VLAN list that has detected a loopback.
OBJECT-TYPE    
  DisplayString  

swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.70.11.2.18.2.1.1.4
This object indicates the port status.
OBJECT-TYPE    
  INTEGER normal(1), loop(2), error(3), none(4)  

swL2Notify 1.3.6.1.4.1.171.11.70.11.2.16.1
OBJECT IDENTIFIER    

swL2NotifyPrefix 1.3.6.1.4.1.171.11.70.11.2.16.1.2
OBJECT IDENTIFIER    

swL2NotifFirmware 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0
OBJECT IDENTIFIER    

swL2LoopDetectedNotify 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.0
OBJECT IDENTIFIER    

swL2macNotification 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.1
This trap indicates the mac addresses variation in address table .
NOTIFICATION-TYPE    

swL2PortLoopOccurred 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.0.3
The trap is sent when Port loop occurred.
NOTIFICATION-TYPE    

swL2PortLoopRestart 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.0.4
The trap is sent when Port loop restart after interval time.
NOTIFICATION-TYPE    

swL2VlanLoopOccurred 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.0.5
The trap is sent when Port with VID loop occurred.
NOTIFICATION-TYPE    

swL2VlanLoopRestart 1.3.6.1.4.1.171.11.70.11.2.16.1.2.0.0.6
The trap is sent when Port with VID loop restart after interval time.
NOTIFICATION-TYPE    

swl2NotificationBidings 1.3.6.1.4.1.171.11.70.11.2.16.1.2.1
OBJECT IDENTIFIER    

swL2macNotifyInfo 1.3.6.1.4.1.171.11.70.11.2.16.1.2.1.1
This object indicates the last time reboot information.
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

swL2VlanLoopDetectVID 1.3.6.1.4.1.171.11.70.11.2.16.1.2.1.3
This object indicates the VID that has detected a loopback.
OBJECT-TYPE    
  INTEGER