DES3852P-SWL3MGMT-MIB

File: DES3852P-SWL3MGMT-MIB.mib (81584 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SW3800PRIMGMT-MIB
OSPF-MIB IF-MIB

Imported symbols

Counter32 MODULE-IDENTITY OBJECT-TYPE
IpAddress NOTIFICATION-TYPE Integer32
Unsigned32 PhysAddress TruthValue
DisplayString RowStatus des3852P
TOSType Metric AreaID
RouterID UpToMaxAge HelloRange
PositiveInteger Status DesignatedRouterPriority
InterfaceIndex

Defined Types

NodeAddress  
OCTET STRING Size(6)    

NetAddress  
OCTET STRING Size(4)    

SwL3IpCtrlEntry  
SEQUENCE    
  swL3IpCtrlIpAddr IpAddress
  swL3IpCtrlIfIndex INTEGER
  swL3IpCtrlInterfaceName DisplayString
  swL3IpCtrlIpSubnetMask IpAddress
  swL3IpCtrlVlanName DisplayString
  swL3IpCtrlMode INTEGER
  swL3IpCtrlSecondary TruthValue
  swL3IpCtrlState RowStatus
  swL3IpCtrlOperState INTEGER
  swL3IpCtrlProxyARPState INTEGER

SwL3VirtualIpCtrlEntry  
SEQUENCE    
  swL3VirtualIpCtrlInterfaceName DisplayString
  swL3VirtualIpCtrlIfIndex INTEGER
  swL3VirtualIpCtrlIpAddr IpAddress
  swL3VirtualIpCtrlIpSubnetMask IpAddress
  swL3VirtualIpCtrlOperState INTEGER
  swL3VirtualIpCtrlState RowStatus

SwL3IpFdbInfoEntry  
SEQUENCE    
  swL3IpFdbInfoIpAddr IpAddress
  swL3IpFdbInfoIpSubnetMask IpAddress
  swL3IpFdbInfoPort INTEGER
  swL3IpFdbInfoType INTEGER

SwL3IpStaticRouteEntry  
SEQUENCE    
  swL3IpStaticRouteDest IpAddress
  swL3IpStaticRouteMask IpAddress
  swL3IpStaticRouteBkupState INTEGER
  swL3IpStaticRouteNextHop IpAddress
  swL3IpStaticRouteMetric INTEGER
  swL3IpStaticRouteStatus INTEGER

SwL3RelayBootpCtrlEntry  
SEQUENCE    
  swL3RelayBootpCtrlInterfaceName DisplayString
  swL3RelayBootpCtrlServer IpAddress
  swL3RelayBootpCtrlState INTEGER

SwL3RelayDnsCtrlEntry  
SEQUENCE    
  swL3RelayDnsCtrlDomainName DisplayString
  swL3RelayDnsCtrlIpAddr IpAddress
  swL3RelayDnsCtrlState INTEGER

SwL3Md5Entry  
SEQUENCE    
  swL3Md5KeyId INTEGER
  swL3Md5Key DisplayString
  swL3Md5RowStatus RowStatus

SwL3RouteRedistriEntry  
SEQUENCE    
  swL3RouteRedistriSrcProtocol INTEGER
  swL3RouteRedistriDstProtocol INTEGER
  swL3RouteRedistriType INTEGER
  swL3RouteRedistriMetric INTEGER
  swL3RouteRedistriRowStatus RowStatus

SwL3OspfHostEntry  
SEQUENCE    
  swL3OspfHostIpAddress IpAddress
  swL3OspfHostTOS TOSType
  swL3OspfHostMetric Metric
  swL3OspfHostAreaID AreaID
  swL3OspfHostStatus RowStatus

SwL3OspfVirtIfEntry  
SEQUENCE    
  swL3ospfVirtIfAreaId AreaID
  swL3ospfVirtIfNeighbor RouterID
  swL3ospfVirtIfTransitDelay UpToMaxAge
  swL3ospfVirtIfRetransInterval UpToMaxAge
  swL3ospfVirtIfHelloInterval HelloRange
  swL3ospfVirtIfRtrDeadInterval PositiveInteger
  swL3ospfVirtIfState INTEGER
  swL3ospfVirtIfEvents Counter32
  swL3ospfVirtIfAuthType INTEGER
  swL3ospfVirtIfAuthKey OCTET STRING
  swL3ospfVirtIfAuthKeyID INTEGER
  swL3ospfVirtIfStatus RowStatus

SwL3OspfIfEntry  
SEQUENCE    
  swL3ospfIfIpAddress IpAddress
  swL3ospfAddressLessIf Integer32
  swL3ospfIfAreaId AreaID
  swL3ospfIfType INTEGER
  swL3ospfIfAdminStat Status
  swL3ospfIfRtrPriority DesignatedRouterPriority
  swL3ospfIfTransitDelay UpToMaxAge
  swL3ospfIfRetransInterval UpToMaxAge
  swL3ospfIfHelloInterval HelloRange
  swL3ospfIfRtrDeadInterval PositiveInteger
  swL3ospfIfPollInterval PositiveInteger
  swL3ospfIfState INTEGER
  swL3ospfIfDesignatedRouter IpAddress
  swL3ospfIfBackupDesignatedRouter IpAddress
  swL3ospfIfEvents Counter32
  swL3ospfIfMulticastForwarding INTEGER
  swL3ospfIfDemand TruthValue
  swL3ospfIfAuthType INTEGER
  swL3ospfIfAuthKey OCTET STRING
  swL3ospfIfAuthKeyID INTEGER
  swL3ospfIfStatus RowStatus

SwL3pimCbsrEntry  
SEQUENCE    
  swL3pimCbsrInterface InterfaceIndex
  swL3pimCbsrPriority Integer32

SwL3pimRegChksumIncDataEntry  
SEQUENCE    
  swL3SwL3pimRegChksumIncDataRpAddr IpAddress
  swL3SwL3pimRegChksumIncDataState RowStatus

SwL3pimInfoEntry  
SEQUENCE    
  swL3pimInterface InterfaceIndex
  swL3pimDRPriority Unsigned32

SwL3pimStaticRPEntry  
SEQUENCE    
  swL3pimStaticRPGroupAddress IpAddress
  swL3pimStaticRPGroupMask IpAddress
  swL3pimStaticRPAddress IpAddress
  swL3pimStaticRPRowStatus RowStatus

SwL3pimActiveRPEntry  
SEQUENCE    
  swL3pimActiveRPGroupAddress IpAddress
  swL3pimActiveRPSourceIPAddress IpAddress
  swL3pimActiveRPSourceIPMask IpAddress
  swL3pimActiveRPAddress IpAddress

Defined Values

swL3MgmtMIB 1.3.6.1.4.1.171.11.69.5.3
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
MODULE-IDENTITY    

swL3DevMgmt 1.3.6.1.4.1.171.11.69.5.3.1
OBJECT IDENTIFIER    

swL3IpMgmt 1.3.6.1.4.1.171.11.69.5.3.2
OBJECT IDENTIFIER    

swL3RelayMgmt 1.3.6.1.4.1.171.11.69.5.3.3
OBJECT IDENTIFIER    

swL3IpCtrlMgmt 1.3.6.1.4.1.171.11.69.5.3.2.1
OBJECT IDENTIFIER    

swL3IpFdbMgmt 1.3.6.1.4.1.171.11.69.5.3.2.2
OBJECT IDENTIFIER    

swL3RelayBootpMgmt 1.3.6.1.4.1.171.11.69.5.3.3.1
OBJECT IDENTIFIER    

swL3RelayDnsMgmt 1.3.6.1.4.1.171.11.69.5.3.3.2
OBJECT IDENTIFIER    

swL3DevCtrl 1.3.6.1.4.1.171.11.69.5.3.1.1
OBJECT IDENTIFIER    

swL3DevCtrlRIPState 1.3.6.1.4.1.171.11.69.5.3.1.1.1
This object indicates if the Routing Information Protocol (RIP) version 2 function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3DevCtrlOSPFState 1.3.6.1.4.1.171.11.69.5.3.1.1.2
This object indicates if the OSPF protocol is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3DevCtrlDVMRPState 1.3.6.1.4.1.171.11.69.5.3.1.1.3
This object indicates if the DVMRP protocol is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3DevCtrlPIMState 1.3.6.1.4.1.171.11.69.5.3.1.1.4
This object indicates if the PIM protocol is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3DevCtrlVRRPState 1.3.6.1.4.1.171.11.69.5.3.1.1.5
This object indicates if the VRRP protocol is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3DevCtrlOSPFECMPState 1.3.6.1.4.1.171.11.69.5.3.1.1.8
This object indicates if the ECMP for OSPF protocol is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3IpCtrlTable 1.3.6.1.4.1.171.11.69.5.3.2.1.1
This table contains the IP interface information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3IpCtrlEntry

swL3IpCtrlEntry 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1
A list of information about a specific IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3IpCtrlEntry  

swL3IpCtrlIpAddr 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.1
The IP address of the interface. This object can only contain the value of the unicast IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3IpCtrlIfIndex 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.2
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL3IpCtrlInterfaceName 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.3
This object indicates the name of the IP interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..12)  

swL3IpCtrlIpSubnetMask 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.4
The IP net mask for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

swL3IpCtrlVlanName 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.5
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL3IpCtrlMode 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.6
This object indicates the IP operation mode. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual (2) - The IP address will be set manually. bootp (3) - The IP address will be set automatically from the BOOTP server. dhcp (4) - The IP address will be set automatically from the DHCP server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), manual(2), bootp(3), dhcp(4)  

swL3IpCtrlSecondary 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.7
When this is true (1) the IP address is the secondary IP. When false (2), the IP address is the primary IP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

swL3IpCtrlState 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.8
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of objects is in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3IpCtrlOperState 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.9
The current operational state of the IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

swL3IpCtrlProxyARPState 1.3.6.1.4.1.171.11.69.5.3.2.1.1.1.10
This object indicates if the Proxy ARP function is enabled or disabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3VirtualIpCtrlTable 1.3.6.1.4.1.171.11.69.5.3.2.1.2
This table contains the virtual IP interface information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3VirtualIpCtrlEntry

swL3VirtualIpCtrlEntry 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1
A list of information about a specific virtual IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3VirtualIpCtrlEntry  

swL3VirtualIpCtrlInterfaceName 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.1
This object indicates the name of the virtual IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..12)  

swL3VirtualIpCtrlIfIndex 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.2
This object uniquely identifies the virtual IP interface number in the swL3VirtualIpCtrlEntry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL3VirtualIpCtrlIpAddr 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.3
The virtual IP address of the interface. This object can only take the value of the unicast IP address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

swL3VirtualIpCtrlIpSubnetMask 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.4
The net mask for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3VirtualIpCtrlOperState 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.5
The current operational state of the virtual IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

swL3VirtualIpCtrlState 1.3.6.1.4.1.171.11.69.5.3.2.1.2.1.9
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3IpFdbInfoTable 1.3.6.1.4.1.171.11.69.5.3.2.2.1
A table that contains forwarding and/or filtering information. This information is used by the switch to determine how to propagate the received IP packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3IpFdbInfoEntry

swL3IpFdbInfoEntry 1.3.6.1.4.1.171.11.69.5.3.2.2.1.1
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3IpFdbInfoEntry  

swL3IpFdbInfoIpAddr 1.3.6.1.4.1.171.11.69.5.3.2.2.1.1.1
An IP address for which the switch has forwarding and/or filtering information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3IpFdbInfoIpSubnetMask 1.3.6.1.4.1.171.11.69.5.3.2.2.1.1.2
An IP net mask for this interface for which the switch has forwarding and/or filtering information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3IpFdbInfoPort 1.3.6.1.4.1.171.11.69.5.3.2.2.1.1.3
Either the value '0', or the port number of the packet that has an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr that has been seen. A value of '0' indicates that the port number has not been learned, but that the switch does have some forwarding/filtering information about this address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL3IpFdbInfoType 1.3.6.1.4.1.171.11.69.5.3.2.2.1.1.4
The status of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), static(2), dynamic(3)  

swL3IpArpAgingTime 1.3.6.1.4.1.171.11.69.5.3.2.4
The timeout period in minutes for aging out dynamically learned ARP information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL3IpStaticRouteTable 1.3.6.1.4.1.171.11.69.5.3.2.5
This entity's IP static routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3IpStaticRouteEntry

swL3IpStaticRouteEntry 1.3.6.1.4.1.171.11.69.5.3.2.5.1
A particular route to a particular destination, under a particular policy. Once an entry is built, it shouldn't be modified. That is, it just supports a create or delete action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3IpStaticRouteEntry  

swL3IpStaticRouteDest 1.3.6.1.4.1.171.11.69.5.3.2.5.1.1
The destination IP address of this route. This object will not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object with a value of x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3IpStaticRouteMask 1.3.6.1.4.1.171.11.69.5.3.2.5.1.2
Indicates that the mask is to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by referring to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to the value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3IpStaticRouteBkupState 1.3.6.1.4.1.171.11.69.5.3.2.5.1.3
The routing state for this route. The value should be primary (1) or backup (2).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), backup(2)  

swL3IpStaticRouteNextHop 1.3.6.1.4.1.171.11.69.5.3.2.5.1.4
On remote routes, the address of the next system route; Otherwise, 0.0.0.0.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

swL3IpStaticRouteMetric 1.3.6.1.4.1.171.11.69.5.3.2.5.1.5
The routing metric for this route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

swL3IpStaticRouteStatus 1.3.6.1.4.1.171.11.69.5.3.2.5.1.6
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

swL3RelayBootpState 1.3.6.1.4.1.171.11.69.5.3.3.1.1
This object indicates if the BOOTP Relay function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayBootpHopCount 1.3.6.1.4.1.171.11.69.5.3.3.1.2
This object indicates the maximum number of router hops that the BOOTP packets can cross.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL3RelayBootpTimeThreshold 1.3.6.1.4.1.171.11.69.5.3.3.1.3
This object indicates the minimum time in seconds within which the switch must relay the BOOTP request. If this time is exceeded, the switch will drop the BOOTP packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL3RelayBootpOption82State 1.3.6.1.4.1.171.11.69.5.3.3.1.4
This object indicates if the DHCP relay agent information option 82 function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayBootpOption82Check 1.3.6.1.4.1.171.11.69.5.3.3.1.5
This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayBootpOption82Policy 1.3.6.1.4.1.171.11.69.5.3.3.1.6
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace (1) - Replace the existing option 82 field in messages. drop (2) - Discard messages with the existing option 82 field. keep (3) - Retain the existing option 82 field in messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

swL3RelayBootpCtrlTable 1.3.6.1.4.1.171.11.69.5.3.3.1.7
This table specifies the IP address as a destination to forward (relay) BOOTP packets to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3RelayBootpCtrlEntry

swL3RelayBootpCtrlEntry 1.3.6.1.4.1.171.11.69.5.3.3.1.7.1
A list of information that specifies the IP address of a destination to forward (relay) BOOTP packets to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3RelayBootpCtrlEntry  

swL3RelayBootpCtrlInterfaceName 1.3.6.1.4.1.171.11.69.5.3.3.1.7.1.1
The name of the IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

swL3RelayBootpCtrlServer 1.3.6.1.4.1.171.11.69.5.3.3.1.7.1.2
The BOOTP server IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3RelayBootpCtrlState 1.3.6.1.4.1.171.11.69.5.3.3.1.7.1.3
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

swL3RelayDnsState 1.3.6.1.4.1.171.11.69.5.3.3.2.1
This object indicates if the DNS Relay function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayDnsPrimaryServer 1.3.6.1.4.1.171.11.69.5.3.3.2.2
This object indicates the address of the primary DNS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL3RelayDnsSecondaryServer 1.3.6.1.4.1.171.11.69.5.3.3.2.3
This object indicates the address of the secondary DNS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL3RelayDnsCacheState 1.3.6.1.4.1.171.11.69.5.3.3.2.4
This object indicates if the DNS Relay cache is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayDnsStaticTableState 1.3.6.1.4.1.171.11.69.5.3.3.2.5
This object indicates if the DNS Relay static table is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL3RelayDnsCtrlTable 1.3.6.1.4.1.171.11.69.5.3.3.2.6
This table display the current DNS relay static table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3RelayDnsCtrlEntry

swL3RelayDnsCtrlEntry 1.3.6.1.4.1.171.11.69.5.3.3.2.6.1
A list of information displaying the current DNS relay static table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3RelayDnsCtrlEntry  

swL3RelayDnsCtrlDomainName 1.3.6.1.4.1.171.11.69.5.3.3.2.6.1.1
The domain name of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

swL3RelayDnsCtrlIpAddr 1.3.6.1.4.1.171.11.69.5.3.3.2.6.1.2
The IP address of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3RelayDnsCtrlState 1.3.6.1.4.1.171.11.69.5.3.3.2.6.1.3
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

swL3Md5Table 1.3.6.1.4.1.171.11.69.5.3.4
This table display the current MD5 key table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3Md5Entry

swL3Md5Entry 1.3.6.1.4.1.171.11.69.5.3.4.1
A list of information displaying the current MD5 key table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3Md5Entry  

swL3Md5KeyId 1.3.6.1.4.1.171.11.69.5.3.4.1.1
The MD5 key ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

swL3Md5Key 1.3.6.1.4.1.171.11.69.5.3.4.1.2
An MD5 password of up to 16 bytes.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..16)  

swL3Md5RowStatus 1.3.6.1.4.1.171.11.69.5.3.4.1.3
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3RouteRedistriTable 1.3.6.1.4.1.171.11.69.5.3.5
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the various routers routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3RouteRedistriEntry

swL3RouteRedistriEntry 1.3.6.1.4.1.171.11.69.5.3.5.1
A list of information displaying the route redistribution table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3RouteRedistriEntry  

swL3RouteRedistriSrcProtocol 1.3.6.1.4.1.171.11.69.5.3.5.1.1
Allows the selection of the protocol for the source device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), rip(2), ospf(3), static(4), local(5)  

swL3RouteRedistriDstProtocol 1.3.6.1.4.1.171.11.69.5.3.5.1.2
Allows the selection of the protocol for the destination device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), rip(2), ospf(3)  

swL3RouteRedistriType 1.3.6.1.4.1.171.11.69.5.3.5.1.3
Allows the selection of one of the methods for calculating the metric value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10)  

swL3RouteRedistriMetric 1.3.6.1.4.1.171.11.69.5.3.5.1.4
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates the default value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..16777214  

swL3RouteRedistriRowStatus 1.3.6.1.4.1.171.11.69.5.3.5.1.5
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3OspfHostTable 1.3.6.1.4.1.171.11.69.5.3.6
The list of hosts and their metrics that the router will advertise as host routes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3OspfHostEntry

swL3OspfHostEntry 1.3.6.1.4.1.171.11.69.5.3.6.1
A metric to be advertised, for a given type of service, when a given host is reachable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3OspfHostEntry  

swL3OspfHostIpAddress 1.3.6.1.4.1.171.11.69.5.3.6.1.1
The IP address of the host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3OspfHostTOS 1.3.6.1.4.1.171.11.69.5.3.6.1.2
The Type of Service for the route being configured.
Status: current Access: read-only
OBJECT-TYPE    
  TOSType  

swL3OspfHostMetric 1.3.6.1.4.1.171.11.69.5.3.6.1.3
The metric to be advertised.
Status: current Access: read-create
OBJECT-TYPE    
  Metric  

swL3OspfHostAreaID 1.3.6.1.4.1.171.11.69.5.3.6.1.4
The area of the host entry to be found within. By default, this is the area that a subsuming OSPF interface is in, or 0.0.0.0
Status: current Access: read-create
OBJECT-TYPE    
  AreaID  

swL3OspfHostStatus 1.3.6.1.4.1.171.11.69.5.3.6.1.5
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3ospfVirtIfTable 1.3.6.1.4.1.171.11.69.5.3.7
Information about this router's virtual inter- faces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3OspfVirtIfEntry

swL3ospfVirtIfEntry 1.3.6.1.4.1.171.11.69.5.3.7.1
Information about a single virtual interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3OspfVirtIfEntry  

swL3ospfVirtIfAreaId 1.3.6.1.4.1.171.11.69.5.3.7.1.1
The transit area that the virtual link traverses. By definition, this is not 0.0.0.0
Status: current Access: read-only
OBJECT-TYPE    
  AreaID  

swL3ospfVirtIfNeighbor 1.3.6.1.4.1.171.11.69.5.3.7.1.2
The router ID of the virtual neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  RouterID  

swL3ospfVirtIfTransitDelay 1.3.6.1.4.1.171.11.69.5.3.7.1.3
The estimated number of seconds it takes to transmit a link-state update packet over this interface.
Status: current Access: read-create
OBJECT-TYPE    
  UpToMaxAge  

swL3ospfVirtIfRetransInterval 1.3.6.1.4.1.171.11.69.5.3.7.1.4
The number of seconds between link-state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
Status: current Access: read-create
OBJECT-TYPE    
  UpToMaxAge  

swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.69.5.3.7.1.5
The length of time, in seconds, between the hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
Status: current Access: read-create
OBJECT-TYPE    
  HelloRange  

swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.69.5.3.7.1.6
The number of seconds that a router's hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for the virtual neigh- bor.
Status: current Access: read-create
OBJECT-TYPE    
  PositiveInteger  

swL3ospfVirtIfState 1.3.6.1.4.1.171.11.69.5.3.7.1.7
OSPF virtual interface states.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

swL3ospfVirtIfEvents 1.3.6.1.4.1.171.11.69.5.3.7.1.8
The number of state changes or error events on this virtual link
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

swL3ospfVirtIfAuthType 1.3.6.1.4.1.171.11.69.5.3.7.1.9
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

swL3ospfVirtIfAuthKey 1.3.6.1.4.1.171.11.69.5.3.7.1.10
If authentication type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

swL3ospfVirtIfAuthKeyID 1.3.6.1.4.1.171.11.69.5.3.7.1.11
The MD5 key ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

swL3ospfVirtIfStatus 1.3.6.1.4.1.171.11.69.5.3.7.1.12
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3ospfIfTable 1.3.6.1.4.1.171.11.69.5.3.8
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3OspfIfEntry

swL3ospfIfEntry 1.3.6.1.4.1.171.11.69.5.3.8.1
The OSPF interface entry describes one inter- face from the viewpoint of OSPF.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3OspfIfEntry  

swL3ospfIfIpAddress 1.3.6.1.4.1.171.11.69.5.3.8.1.1
The IP address of this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3ospfAddressLessIf 1.3.6.1.4.1.171.11.69.5.3.8.1.2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swL3ospfIfAreaId 1.3.6.1.4.1.171.11.69.5.3.8.1.3
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: current Access: read-create
OBJECT-TYPE    
  AreaID  

swL3ospfIfType 1.3.6.1.4.1.171.11.69.5.3.8.1.4
The OSPF interface type. By way of default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma' and links that are definitively point-to-point take the value 'pointToPoint'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)  

swL3ospfIfAdminStat 1.3.6.1.4.1.171.11.69.5.3.8.1.5
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some areas. The value 'disabled' denotes that the interface is external to OSPF.
Status: current Access: read-create
OBJECT-TYPE    
  Status  

swL3ospfIfRtrPriority 1.3.6.1.4.1.171.11.69.5.3.8.1.6
The priority of this interface. Used in multi-access networks, this field is used by the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their router ID as a tie breaker.
Status: current Access: read-create
OBJECT-TYPE    
  DesignatedRouterPriority  

swL3ospfIfTransitDelay 1.3.6.1.4.1.171.11.69.5.3.8.1.7
The estimated number of seconds it takes to transmit a link state update packet over this interface.
Status: current Access: read-create
OBJECT-TYPE    
  UpToMaxAge  

swL3ospfIfRetransInterval 1.3.6.1.4.1.171.11.69.5.3.8.1.8
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
Status: current Access: read-create
OBJECT-TYPE    
  UpToMaxAge  

swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.69.5.3.8.1.9
The length of time, in seconds, between the hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
Status: current Access: read-create
OBJECT-TYPE    
  HelloRange  

swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.69.5.3.8.1.10
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for all routers attached to a common network.
Status: current Access: read-create
OBJECT-TYPE    
  PositiveInteger  

swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.69.5.3.8.1.11
The larger time interval, in seconds, between the hello packets sent to an inactive non- broadcast multi-access neighbor.
Status: current Access: read-create
OBJECT-TYPE    
  PositiveInteger  

swL3ospfIfState 1.3.6.1.4.1.171.11.69.5.3.8.1.12
The OSPF interface state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)  

swL3ospfIfDesignatedRouter 1.3.6.1.4.1.171.11.69.5.3.8.1.13
The IP address of the designated router.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3ospfIfBackupDesignatedRouter 1.3.6.1.4.1.171.11.69.5.3.8.1.14
The IP address of the backup designated router.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3ospfIfEvents 1.3.6.1.4.1.171.11.69.5.3.8.1.15
The number of times this OSPF interface has changed its state, or when an error has occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

swL3ospfIfMulticastForwarding 1.3.6.1.4.1.171.11.69.5.3.8.1.16
The way multicasts should be forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaning- ful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER blocked(1), multicast(2), unicast(3)  

swL3ospfIfDemand 1.3.6.1.4.1.171.11.69.5.3.8.1.17
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

swL3ospfIfAuthType 1.3.6.1.4.1.171.11.69.5.3.8.1.18
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

swL3ospfIfAuthKey 1.3.6.1.4.1.171.11.69.5.3.8.1.19
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey will always return a zero length Octet String.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

swL3ospfIfAuthKeyID 1.3.6.1.4.1.171.11.69.5.3.8.1.20
The MD5 key ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

swL3ospfIfStatus 1.3.6.1.4.1.171.11.69.5.3.8.1.21
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3RoutePreference 1.3.6.1.4.1.171.11.69.5.3.9
OBJECT IDENTIFIER    

swL3RoutePreferenceRIP 1.3.6.1.4.1.171.11.69.5.3.9.1
Used to configure the RIP route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3RoutePreferenceOSPFIntra 1.3.6.1.4.1.171.11.69.5.3.9.2
Used to configure the OSPF intra route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3RoutePreferenceStatic 1.3.6.1.4.1.171.11.69.5.3.9.3
Used to configure the static route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3RoutePreferenceLocal 1.3.6.1.4.1.171.11.69.5.3.9.4
Used to read the local route preference.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..999  

swL3RoutePreferenceOSPFInter 1.3.6.1.4.1.171.11.69.5.3.9.5
Used to configure the OSPF inter route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3RoutePreferenceOSPFExtT1 1.3.6.1.4.1.171.11.69.5.3.9.6
Used to configure the OSPF ExtT1 route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3RoutePreferenceOSPFExtT2 1.3.6.1.4.1.171.11.69.5.3.9.7
Used to configure the OSPF ExtT2 route preference.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

swL3PimMgmt 1.3.6.1.4.1.171.11.69.5.3.11
OBJECT IDENTIFIER    

swL3PimCbsrInfoMgmt 1.3.6.1.4.1.171.11.69.5.3.11.1
OBJECT IDENTIFIER    

swL3pimCbsrBootStrapPeriod 1.3.6.1.4.1.171.11.69.5.3.11.1.1
At the elected BSR, this is the interval between originating bootstrap messages, and should be equal to 60 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

swL3pimCbsrHashMaskLen 1.3.6.1.4.1.171.11.69.5.3.11.1.2
The length (in bits) of the mask to use in the hash function. For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

swL3pimCbsrTable 1.3.6.1.4.1.171.11.69.5.3.11.1.3
The PIM CBSR Table contains the CBSR related information, like interface and priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3pimCbsrEntry

swL3pimCbsrEntry 1.3.6.1.4.1.171.11.69.5.3.11.1.3.1
An entry in the PIM CBSR Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3pimCbsrEntry  

swL3pimCbsrInterface 1.3.6.1.4.1.171.11.69.5.3.11.1.3.1.1
The ifIndex value of this PIM interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

swL3pimCbsrPriority 1.3.6.1.4.1.171.11.69.5.3.11.1.3.1.2
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..255  

swL3pimCandidateRPMgmt 1.3.6.1.4.1.171.11.69.5.3.11.2
OBJECT IDENTIFIER    

swL3pimCandidateRPHoldtime 1.3.6.1.4.1.171.11.69.5.3.11.2.1
For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

swL3pimCandidateRPPriority 1.3.6.1.4.1.171.11.69.5.3.11.2.2
The 'priority' of the included RP, for the corresponding Encoded-Group Address (if any). The highest priority is '0' (i.e. the lower the value of the 'Priority' field, the higher the priority). This field is stored at the BSR upon receipt, along with the RP address and corresponding Encoded-Group Address.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

swL3pimCandidateRPWildcardPrefixCnt 1.3.6.1.4.1.171.11.69.5.3.11.2.3
The number of encoded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a prefix of 224.0.0.0 with a mask length of 4; i.e. all multicast groups. If the C-RP is not configured with Group-prefix information, the C-RP puts a default value of '0' in this field.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

swL3pimSptMgmt 1.3.6.1.4.1.171.11.69.5.3.11.3
OBJECT IDENTIFIER    

swL3pimLastHopSptThreshold 1.3.6.1.4.1.171.11.69.5.3.11.3.1
Specifies a last hop router threshold.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..8)  

swL3pimRPSptThreshold 1.3.6.1.4.1.171.11.69.5.3.11.3.2
Specifies an RP threshold.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..8)  

swL3pimRegChksumIncDataTable 1.3.6.1.4.1.171.11.69.5.3.11.4
The PIM Register Checksum Including Data Table contains the PIM register checksum including data information, like RP address and state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3pimRegChksumIncDataEntry

swL3pimRegChksumIncDataEntry 1.3.6.1.4.1.171.11.69.5.3.11.4.1
An entry in the PIM Register Checksum Including the Data Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3pimRegChksumIncDataEntry  

swL3SwL3pimRegChksumIncDataRpAddr 1.3.6.1.4.1.171.11.69.5.3.11.4.1.1
Specifies the RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3SwL3pimRegChksumIncDataState 1.3.6.1.4.1.171.11.69.5.3.11.4.1.2
The state of register checksum including the data for RPs.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3PimInfoMgmt 1.3.6.1.4.1.171.11.69.5.3.11.5
OBJECT IDENTIFIER    

swL3pimRegisterProbeTime 1.3.6.1.4.1.171.11.69.5.3.11.5.1
When null registers are used, this is the time between sending a null register and the register-suppression-timer expiring unless it is restarted by receiving a register-stop. Thus, a null register would be sent when the register-suppression-timer reaches this value. Default: 5 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..127  

swL3pimRegisterSuppressionTime 1.3.6.1.4.1.171.11.69.5.3.11.5.2
This is the mean interval between receiving a register-stop and allowing registers to be sent again. A lower value means more frequent register bursts at RP, while a higher value means longer join latency for the new receiver. Default: 60 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..255  

swL3pimInfoTable 1.3.6.1.4.1.171.11.69.5.3.11.5.3
The PIM Information Table contains PIM related information, like DR priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3pimInfoEntry

swL3pimInfoEntry 1.3.6.1.4.1.171.11.69.5.3.11.5.3.1
An entry in the PIM Information Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3pimInfoEntry  

swL3pimInterface 1.3.6.1.4.1.171.11.69.5.3.11.5.3.1.1
The ifIndex value of this PIM interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

swL3pimDRPriority 1.3.6.1.4.1.171.11.69.5.3.11.5.3.1.2
The DR Priority is a 32-bit unsigned number and the numerically larger priority is always prefered. A router's idea of the current DR on an interface can change when a PIM hello message is received, when a neighbor times out, or when a router's own DR priority changes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967294  

swL3pimStaticRPTable 1.3.6.1.4.1.171.11.69.5.3.11.6
The PIM Static RP Table contains the PIM static RP related information, like group address, group mask, RP address and RP row status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3pimStaticRPEntry

swL3pimStaticRPEntry 1.3.6.1.4.1.171.11.69.5.3.11.6.1
An entry in the PIM Static RP Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3pimStaticRPEntry  

swL3pimStaticRPGroupAddress 1.3.6.1.4.1.171.11.69.5.3.11.6.1.1
The IP multicast group address which, when combined with swL3pimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself as a static RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimStaticRPGroupMask 1.3.6.1.4.1.171.11.69.5.3.11.6.1.2
The multicast group address mask which, when combined with swL3pimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a static RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimStaticRPAddress 1.3.6.1.4.1.171.11.69.5.3.11.6.1.3
The (unicast) address of the interface which will be advertised as a static RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimStaticRPRowStatus 1.3.6.1.4.1.171.11.69.5.3.11.6.1.4
The status of this row. New entries may be created or old entries deleted from this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL3pimActiveRPTable 1.3.6.1.4.1.171.11.69.5.3.11.7
The PIM Active RP Table contains the PIM active RP related information, like group address, RP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL3pimActiveRPEntry

swL3pimActiveRPEntry 1.3.6.1.4.1.171.11.69.5.3.11.7.1
An entry (conceptual row) in the swL3pimActiveRPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL3pimActiveRPEntry  

swL3pimActiveRPGroupAddress 1.3.6.1.4.1.171.11.69.5.3.11.7.1.1
The IP multicast group address for which this entry contains information about the Active-RP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimActiveRPSourceIPAddress 1.3.6.1.4.1.171.11.69.5.3.11.7.1.2
The IP address for which this entry contains information about the source of multicast data.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimActiveRPSourceIPMask 1.3.6.1.4.1.171.11.69.5.3.11.7.1.3
The IP mask for which this entry contains information about the source of multicast data.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL3pimActiveRPAddress 1.3.6.1.4.1.171.11.69.5.3.11.7.1.4
The IP address of the Active-RP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL3OspfDefaultInfoOriginate 1.3.6.1.4.1.171.11.69.5.3.12
OBJECT IDENTIFIER    

swL3OspfDefaultInfoOriginateState 1.3.6.1.4.1.171.11.69.5.3.12.1
This object indicates if the Default Info Originate is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Status  

swL3OspfDefaultInfoOriginateAlways 1.3.6.1.4.1.171.11.69.5.3.12.2
This object indicates if the always parameter is enabled or disabled. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting.
Status: current Access: read-write
OBJECT-TYPE    
  Status  

swL3OspfDefaultInfoOriginateMettype 1.3.6.1.4.1.171.11.69.5.3.12.3
This object indicates the type of AS external route. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

swL3OspfDefaultInfoOriginateMetric 1.3.6.1.4.1.171.11.69.5.3.12.4
This object indicates the cost of a default route to be advertised in OSPF. The range is 0 to 16777214.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777214  

swL3TraceRouteMgmt 1.3.6.1.4.1.171.11.69.5.3.13
OBJECT IDENTIFIER    

swL3TraceRouteCtrl 1.3.6.1.4.1.171.11.69.5.3.13.1
OBJECT IDENTIFIER    

swL3TraceRoutePKTToCPUState 1.3.6.1.4.1.171.11.69.5.3.13.1.1
This object indicates to control whether to capture IP packet with zero TTL to CPU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)