DES3852-L2MGMT-MIB

File: DES3852-L2MGMT-MIB.mib (84366 bytes)

Imported modules

SNMPv2-SMI SNMP-FRAMEWORK-MIB SNMPv2-TC
SW3800PRIMGMT-MIB RFC1213-MIB

Imported symbols

Counter32 TimeTicks NOTIFICATION-TYPE
MODULE-IDENTITY OBJECT-TYPE IpAddress
Unsigned32 SnmpAdminString MacAddress
RowStatus des3852 DisplayString

Defined Types

PortList  
STRING Size(0..127)    

VlanIndex  
Unsigned32    

VlanId  
INTEGER 1..4094    

SwDevInfoPowerEntry  
SEQUENCE    
  swDevInfoPowerUnitIndex INTEGER
  swDevInfoPowerID INTEGER
  swDevInfoPowerStatus INTEGER

SwL2VlanAdvertisementEntry  
SEQUENCE    
  swL2VlanIndex INTEGER
  swL2VlanName DisplayString
  swL2VlanAdvertiseState INTEGER

SwL2PortInfoEntry  
SEQUENCE    
  swL2PortInfoPortIndex INTEGER
  swL2PortInfoUnitIndex INTEGER
  swL2PortInfoType INTEGER
  swL2PortInfoLinkStatus INTEGER
  swL2PortInfoNwayStatus INTEGER
  swL2PortInfoModuleType INTEGER
  swL2PortInfoErrorDisabled INTEGER

SwL2PortCtrlEntry  
SEQUENCE    
  swL2PortCtrlPortIndex INTEGER
  swL2PortCtrlUnitIndex INTEGER
  swL2PortCtrlAdminState INTEGER
  swL2PortCtrlNwayState INTEGER
  swL2PortCtrlFlowCtrlState INTEGER
  swL2PortCtrlLockState INTEGER
  swL2PortCtrlMACNotifyState INTEGER

SwL2PortInformationEntry  
SEQUENCE    
  swL2PortInformationPortIndex INTEGER
  swL2PortInformationMediumType INTEGER
  swL2PortInformationUnitID INTEGER
  swL2PortInformationType INTEGER
  swL2PortInformationLinkStatus INTEGER
  swL2PortInformationNwayStatus INTEGER
  swL2PortInformationModuleType INTEGER
  swL2PortInformationErrorDisabled INTEGER

SwL2PortControlEntry  
SEQUENCE    
  swL2PortControlPortIndex INTEGER
  swL2PortControlMediumType INTEGER
  swL2PortControlUnitIndex INTEGER
  swL2PortControlAdminState INTEGER
  swL2PortControlNwayState INTEGER
  swL2PortControlFlowCtrlState INTEGER
  swL2PortControlLearningState INTEGER
  swL2PortControlMACNotifyState INTEGER
  swL2PortControlMulticastfilter INTEGER

SwL2QOSBandwidthControlEntry  
SEQUENCE    
  swL2QOSBandwidthPortIndex INTEGER
  swL2QOSBandwidthRxRate INTEGER
  swL2QOSBandwidthTxRate INTEGER
  swL2QOSBandwidthRadiusRxRate INTEGER
  swL2QOSBandwidthRadiusTxRate INTEGER

SwL2QOSSchedulingEntry  
SEQUENCE    
  swL2QOSSchedulingClassIndex INTEGER
  swL2QOSSchedulingMaxPkts INTEGER

SwL2QOS8021pUserPriorityEntry  
SEQUENCE    
  swL2QOS8021pUserPriorityIndex INTEGER
  swL2QOS8021pUserPriorityClass INTEGER

SwL2QOS8021pDefaultPriorityEntry  
SEQUENCE    
  swL2QOS8021pDefaultPriorityIndex INTEGER
  swL2QOS8021pDefaultPriority INTEGER
  swL2QOS8021pRadiusPriority INTEGER

SwL2TrunkCtrlEntry  
SEQUENCE    
  swL2TrunkIndex INTEGER
  swL2TrunkName DisplayString
  swL2TrunkMasterPort INTEGER
  swL2TrunkMember PortList
  swL2TrunkFloodingPort INTEGER
  swL2TrunkType INTEGER
  swL2TrunkState RowStatus

SwL2IGMPCtrlEntry  
SEQUENCE    
  swL2IGMPCtrlVid INTEGER
  swL2IGMPQueryInterval INTEGER
  swL2IGMPMaxResponseTime INTEGER
  swL2IGMPRobustness INTEGER
  swL2IGMPLastMemberQueryInterval INTEGER
  swL2IGMPHostTimeout INTEGER
  swL2IGMPRouteTimeout INTEGER
  swL2IGMPLeaveTimer INTEGER
  swL2IGMPQueryState INTEGER
  swL2IGMPCurrentState INTEGER
  swL2IGMPCtrlState INTEGER
  swL2IGMPFastLeaveState INTEGER

SwL2IGMPQueryInfoEntry  
SEQUENCE    
  swL2IGMPInfoVid INTEGER
  swL2IGMPInfoQueryCount INTEGER
  swL2IGMPInfoTxQueryCount INTEGER

SwL2IGMPInfoEntry  
SEQUENCE    
  swL2IGMPVid INTEGER
  swL2IGMPGroupIpAddr IpAddress
  swL2IGMPMacAddr MacAddress
  swL2IGMPPortMap PortList
  swL2IGMPIpGroupReportCount INTEGER

SwL2IGMPMulticastVlanEntry  
SEQUENCE    
  swL2IGMPMulticastVlanid INTEGER
  swL2IGMPMulticastVlanName SnmpAdminString
  swL2IGMPMulticastVlanSourcePort PortList
  swL2IGMPMulticastVlanMemberPort PortList
  swL2IGMPMulticastVlanRowStatus RowStatus

SwL2IGMPRouterPortEntry  
SEQUENCE    
  swL2IGMPRouterPortVlanid INTEGER
  swL2IGMPRouterPortVlanName SnmpAdminString
  swL2IGMPRouterPortStaticPortList PortList
  swL2IGMPRouterPortDynamicPortList PortList
  swL2IGMPRouterPortForbiddenPortList PortList

SwL2TrafficSegEntry  
SEQUENCE    
  swL2TrafficSegPort INTEGER
  swL2TrafficSegForwardPorts PortList

SwL2PortSecurityControlEntry  
SEQUENCE    
  swL2PortSecurityPortIndex INTEGER
  swL2PortSecurityMaxLernAddr INTEGER
  swL2PortSecurityMode INTEGER
  swL2PortSecurityAdmState INTEGER

Defined Values

swL2MgmtMIB 1.3.6.1.4.1.171.11.69.4.2
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
MODULE-IDENTITY    

swL2DevMgmt 1.3.6.1.4.1.171.11.69.4.2.1
OBJECT IDENTIFIER    

swL2VlanMgmt 1.3.6.1.4.1.171.11.69.4.2.3
OBJECT IDENTIFIER    

swL2PortMgmt 1.3.6.1.4.1.171.11.69.4.2.4
OBJECT IDENTIFIER    

swL2QOSMgmt 1.3.6.1.4.1.171.11.69.4.2.6
OBJECT IDENTIFIER    

swL2TrunkMgmt 1.3.6.1.4.1.171.11.69.4.2.8
OBJECT IDENTIFIER    

swL2MirrorMgmt 1.3.6.1.4.1.171.11.69.4.2.9
OBJECT IDENTIFIER    

swL2IGMPMgmt 1.3.6.1.4.1.171.11.69.4.2.10
OBJECT IDENTIFIER    

swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.69.4.2.13
OBJECT IDENTIFIER    

swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.69.4.2.14
OBJECT IDENTIFIER    

swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.69.4.2.15
OBJECT IDENTIFIER    

swL2DevInfo 1.3.6.1.4.1.171.11.69.4.2.1.1
OBJECT IDENTIFIER    

swDevInfoSystemUpTime 1.3.6.1.4.1.171.11.69.4.2.1.1.1
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in the units of seconds.
OBJECT-TYPE    
  TimeTicks  

swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.69.4.2.1.1.2
The number of ports within this switch. This value is the sum of the ports within this switch.
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.69.4.2.1.1.3
The number of ports in this switch connected to the segment or the end stations.
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoConsoleInUse 1.3.6.1.4.1.171.11.69.4.2.1.1.4
The usage indication of the console system.
OBJECT-TYPE    
  INTEGER other(1), in-use(2), not-in-use(3)  

swDevInfoModuleType 1.3.6.1.4.1.171.11.69.4.2.1.1.5
This object indicates the module type of this port.
OBJECT-TYPE    
  STRING  

swDevInfoFrontPanelLedMode 1.3.6.1.4.1.171.11.69.4.2.1.1.6
This object indicates the mode of current device front panel LEDs . The front panel LED mode could be changed only by a push button on the device front panel . PortStatusMode : the LEDs respresent ports status. PoEStatusMode : the LEDs respresent POE status.
OBJECT-TYPE    
  INTEGER portStatusMode(1), poeStatusMode(2)  

swDevInfoPowerTable 1.3.6.1.4.1.171.11.69.4.2.1.1.8
A list of the temperature.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDevInfoPowerEntry

swDevInfoPowerEntry 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1
An entry for Power information.
OBJECT-TYPE    
  SwDevInfoPowerEntry  

swDevInfoPowerUnitIndex 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.1
Indicates the ID of the unit in the System
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoPowerID 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.2
Indicates ID of the power
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoPowerStatus 1.3.6.1.4.1.171.11.69.4.2.1.1.8.1.3
Indicates status of the power
OBJECT-TYPE    
  INTEGER other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6)  

swL2DevCtrl 1.3.6.1.4.1.171.11.69.4.2.1.2
OBJECT IDENTIFIER    

swL2DevCtrlStpState 1.3.6.1.4.1.171.11.69.4.2.1.2.1
This object can enable or disable the spanning tree algorithm during the runtime of the system.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.69.4.2.1.2.2
This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.69.4.2.1.2.3
This object can be enable or disable RMON.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.69.4.2.1.2.4
If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
OBJECT-TYPE    
  INTEGER normal(1), active(2)  

swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.69.4.2.1.2.5
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system.
OBJECT-TYPE    
  VlanId  

swL2MACNotifyState 1.3.6.1.4.1.171.11.69.4.2.1.2.6
This object can enable or disable MAC Notification.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.69.4.2.1.2.7
This object indicates the history size of variation MAC in the address table. The default value is 1 .
OBJECT-TYPE    
  INTEGER 1..500  

swL2MACNotifyInterval 1.3.6.1.4.1.171.11.69.4.2.1.2.8
This object indicates the time interval in seconds for triggering the MAC notify message.
OBJECT-TYPE    
  INTEGER 1..2147483647  

swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.69.4.2.1.2.10
OBJECT IDENTIFIER    

swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.69.4.2.1.2.10.1
This object controls the Telnet status.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.69.4.2.1.2.10.2
This object can designate a TCP port. When Telnet is disabled this object isn't accessible.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2DevAlarm 1.3.6.1.4.1.171.11.69.4.2.1.3
OBJECT IDENTIFIER    

swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.69.4.2.1.3.1
When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.69.4.2.1.3.2
This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device doesn't send the trap if this object value is set to disabled or other.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.69.4.2.1.3.3
This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device doesn't send the trap if this object value is set to disabled or other.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2VlanAdvertisementTable 1.3.6.1.4.1.171.11.69.4.2.3.1
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2VlanAdvertisementEntry

swL2VlanAdvertisementEntry 1.3.6.1.4.1.171.11.69.4.2.3.1.1
Advertisement state for each VLAN configured in the device.
OBJECT-TYPE    
  SwL2VlanAdvertisementEntry  

swL2VlanIndex 1.3.6.1.4.1.171.11.69.4.2.3.1.1.1
The VLAN-ID or other identifier referring to this VLAN.
OBJECT-TYPE    
  INTEGER 1..4094  

swL2VlanName 1.3.6.1.4.1.171.11.69.4.2.3.1.1.2
An administratively assigned string, which may be used to identify the VLAN.
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2VlanAdvertiseState 1.3.6.1.4.1.171.11.69.4.2.3.1.1.3
This object indicates the advertised status of this VLAN entry.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortInfoTable 1.3.6.1.4.1.171.11.69.4.2.4.1
A table that contains information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortInfoEntry

swL2PortInfoEntry 1.3.6.1.4.1.171.11.69.4.2.4.1.1
A list of information for each port of the device.
OBJECT-TYPE    
  SwL2PortInfoEntry  

swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.69.4.2.4.1.1.1
This object indicates the module's port number.(1..Max port number in the module).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoUnitIndex 1.3.6.1.4.1.171.11.69.4.2.4.1.1.2
Indicates ID of the unit in the device
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoType 1.3.6.1.4.1.171.11.69.4.2.4.1.1.3
This object indicates the connector type of this port.
OBJECT-TYPE    
  INTEGER portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), none(7)  

swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.69.4.2.4.1.1.4
This object indicates the port link status.
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.69.4.2.4.1.1.5
This object indicates the port speed and duplex mode.
OBJECT-TYPE    
  INTEGER other(1), auto(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8)  

swL2PortInfoModuleType 1.3.6.1.4.1.171.11.69.4.2.4.1.1.6
This object indicates the module type of this port.
OBJECT-TYPE    
  INTEGER none(0), moduleType-COMBO(1), moduleType-1000T(2), moduleType-BaseModule(3)  

swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.69.4.2.4.1.1.7
This object indicates the blocking type of this port.
OBJECT-TYPE    
  INTEGER none(0), storm(1), lbd(2), unknow(3)  

swL2PortCtrlTable 1.3.6.1.4.1.171.11.69.4.2.4.2
A table that contains control information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCtrlEntry

swL2PortCtrlEntry 1.3.6.1.4.1.171.11.69.4.2.4.2.1
A list of control information for each port of the device.
OBJECT-TYPE    
  SwL2PortCtrlEntry  

swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.69.4.2.4.2.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.69.4.2.4.2.1.2
Indicates the ID of the unit in the device
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.69.4.2.4.2.1.3
This object decides whether the port is enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.69.4.2.4.2.1.4
Choose the port speed, duplex mode, and N-Way function mode.
OBJECT-TYPE    
  INTEGER other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8)  

swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.69.4.2.4.2.1.5
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlLockState 1.3.6.1.4.1.171.11.69.4.2.4.2.1.6
This object decides whether the port is locked or not.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.69.4.2.4.2.1.7
This object decides whether MAC notification is enabled or not.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.69.4.2.4.3
This object configure the switch's jumbo frame settings.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortInformationTable 1.3.6.1.4.1.171.11.69.4.2.4.4
A table that contains information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortInformationEntry

swL2PortInformationEntry 1.3.6.1.4.1.171.11.69.4.2.4.4.1
A list of information for each port of the device.
OBJECT-TYPE    
  SwL2PortInformationEntry  

swL2PortInformationPortIndex 1.3.6.1.4.1.171.11.69.4.2.4.4.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInformationMediumType 1.3.6.1.4.1.171.11.69.4.2.4.4.1.2
Indicates medium type of the port number.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortInformationUnitID 1.3.6.1.4.1.171.11.69.4.2.4.4.1.3
Indicates ID of the unit in the system
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInformationType 1.3.6.1.4.1.171.11.69.4.2.4.4.1.4
This object indicates the connector type of this port.
OBJECT-TYPE    
  INTEGER portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), portType-1000Base-SX-GBIC(7), portType-1000Base-LX-GBIC(8), portType-1000Base-TX-GBIC(9), portType-1000Base-1394(10), portType-1000Base-TX-GBIC-COMBO(11), portType-1000Base-none-GBIC(12), portType-1000Base-SX-MGBIC(13), portType-1000Base-LX-MGBIC(14), portType-1000Base-TX-MGBIC(15), portType-1000Base-none-MGBIC(16), portType-SIO(17), portType-10G(18), portType-10G-xenpak-1310nm(19), portType-10G-xenpak-850nm(20), portType-10G-xenpak-empty(21), portType-10G-xfp-1310nm(22), portType-10G-xfp-850nm(23), portType-10G-xfp-empty(24), portType-none(25)  

swL2PortInformationLinkStatus 1.3.6.1.4.1.171.11.69.4.2.4.4.1.5
This object indicates the port link status.
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

swL2PortInformationNwayStatus 1.3.6.1.4.1.171.11.69.4.2.4.4.1.6
This object indicates the port speed and duplex mode.
OBJECT-TYPE    
  INTEGER other(0), empty(1), link-down(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8), full-10Gigabps(9)  

swL2PortInformationModuleType 1.3.6.1.4.1.171.11.69.4.2.4.4.1.7
This object indicates the module type of this port.
OBJECT-TYPE    
  INTEGER none(0), moduleType-COMBO(1), moduleType-1394(2), moduleType-1000T(3), moduleType-MGBIC(4), moduleType-1P-SC-SX(5), moduleType-2P-SC-SX(6), moduleType-1P-SC-LX(7), moduleType-2P-SC-LX(8), moduleType-1P-TX(9), moduleType-2P-TX(10), moduleType-1P-MTRJ-SX(11), moduleType-2P-MTRJ-SX(12), moduleType-1P-MTRJ-LX(13), moduleType-2P-MTRJ-LX(14), moduleType-1P-GBIC(15), moduleType-2P-GBIC(16), moduleType-1P-GBIC-1P-TX(17), moduleType-1P-GBIC-1P-STACK(18), moduleType-2P-STACK(19), moduleType-2P-100FX(20), moduleType-1P-100FX(21), moduleType-2P-100FX-NEW(22), moduleType-1P-100FL(23), moduleType-2P-100FL(24), moduleType-2P-100TX(25), moduleType-BaseModule-24PORT(26)  

swL2PortInformationErrorDisabled 1.3.6.1.4.1.171.11.69.4.2.4.4.1.8
This object indicates the blocking type of this port.
OBJECT-TYPE    
  INTEGER none(0), storm(1), lbd(2), unknow(3)  

swL2PortControlTable 1.3.6.1.4.1.171.11.69.4.2.4.5
A table that contains control information about every port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortControlEntry

swL2PortControlEntry 1.3.6.1.4.1.171.11.69.4.2.4.5.1
A list of control information for each port of the device.
OBJECT-TYPE    
  SwL2PortControlEntry  

swL2PortControlPortIndex 1.3.6.1.4.1.171.11.69.4.2.4.5.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortControlMediumType 1.3.6.1.4.1.171.11.69.4.2.4.5.1.2
Indicates the medium type of the port number.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortControlUnitIndex 1.3.6.1.4.1.171.11.69.4.2.4.5.1.3
Indicates ID of the unit in the device
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortControlAdminState 1.3.6.1.4.1.171.11.69.4.2.4.5.1.4
This object decides if the port is enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortControlNwayState 1.3.6.1.4.1.171.11.69.4.2.4.5.1.5
Choose the port speed, duplex mode, and N-Way function mode.
OBJECT-TYPE    
  INTEGER other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10)  

swL2PortControlFlowCtrlState 1.3.6.1.4.1.171.11.69.4.2.4.5.1.6
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortControlLearningState 1.3.6.1.4.1.171.11.69.4.2.4.5.1.7
This object decides whether the port is locked or not.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortControlMACNotifyState 1.3.6.1.4.1.171.11.69.4.2.4.5.1.8
This object sets each port's MAC notification state.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortControlMulticastfilter 1.3.6.1.4.1.171.11.69.4.2.4.5.1.9
This object controls the multicast port filtering mode for a specified port.
OBJECT-TYPE    
  INTEGER other(0), forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)  

swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.69.4.2.6.1
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSBandwidthControlEntry

swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.69.4.2.6.1.1
A list of information contained in swL2QOSBandwidthControlTable.
OBJECT-TYPE    
  SwL2QOSBandwidthControlEntry  

swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.69.4.2.6.1.1.1
Indicates the port.
OBJECT-TYPE    
  INTEGER 1..650  

swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.69.4.2.6.1.1.2
Indicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit.
OBJECT-TYPE    
  INTEGER 0..1000000  

swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.69.4.2.6.1.1.3
Indicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit.
OBJECT-TYPE    
  INTEGER 0..1000000  

swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.69.4.2.6.1.1.4
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
OBJECT-TYPE    
  INTEGER  

swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.69.4.2.6.1.1.5
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.69.4.2.6.2
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSSchedulingEntry

swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.69.4.2.6.2.1
A list of information contained in swL2QOSSchedulingTable.
OBJECT-TYPE    
  SwL2QOSSchedulingEntry  

swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.69.4.2.6.2.1.1
Indicates the hardware queue number.
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.69.4.2.6.2.1.2
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.
OBJECT-TYPE    
  INTEGER 0..15  

swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.69.4.2.6.3
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pUserPriorityEntry

swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.69.4.2.6.3.1
A list of information contained in swL2QOS8021pUserPriorityTable.
OBJECT-TYPE    
  SwL2QOS8021pUserPriorityEntry  

swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.69.4.2.6.3.1.1
The 802.1p user priority .
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.69.4.2.6.3.1.2
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.69.4.2.6.4
.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pDefaultPriorityEntry

swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.69.4.2.6.4.1
A list of information contained in swL2QOS8021pDefaultPriorityTable.
OBJECT-TYPE    
  SwL2QOS8021pDefaultPriorityEntry  

swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.69.4.2.6.4.1.1
Indicates the port number.
OBJECT-TYPE    
  INTEGER 1..650  

swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.69.4.2.6.4.1.2
The priority value to assign to untagged packets received by the switch ports on the switch.
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.69.4.2.6.4.1.3
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
OBJECT-TYPE    
  INTEGER  

swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.69.4.2.8.1
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.69.4.2.8.2
Current active number of entries in the trunk configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.69.4.2.8.3
This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkCtrlEntry

swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.69.4.2.8.3.1
A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
OBJECT-TYPE    
  SwL2TrunkCtrlEntry  

swL2TrunkIndex 1.3.6.1.4.1.171.11.69.4.2.8.3.1.1
The index of logical port trunk. The trunk group number depends on the existence of the unit and module.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkName 1.3.6.1.4.1.171.11.69.4.2.8.3.1.2
The name of logical port trunk.
OBJECT-TYPE    
  DisplayString Size(0..12)  

swL2TrunkMasterPort 1.3.6.1.4.1.171.11.69.4.2.8.3.1.3
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkMember 1.3.6.1.4.1.171.11.69.4.2.8.3.1.4
Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks.
OBJECT-TYPE    
  PortList  

swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.69.4.2.8.3.1.5
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkType 1.3.6.1.4.1.171.11.69.4.2.8.3.1.6
This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group .
OBJECT-TYPE    
  INTEGER other(1), static(2), lacp(3)  

swL2TrunkState 1.3.6.1.4.1.171.11.69.4.2.8.3.1.7
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.69.4.2.8.4
This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
OBJECT-TYPE    
  INTEGER other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7)  

swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.69.4.2.9.1
This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.69.4.2.9.2
This represents the ingress of the source port packet to be sniffed.
OBJECT-TYPE    
  PortList  

swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.69.4.2.9.3
This represents the egress of the source port packet to be sniffed.
OBJECT-TYPE    
  PortList  

swL2MirrorPortState 1.3.6.1.4.1.171.11.69.4.2.9.4
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disabled(2) - writing this value to the object will remove the corresponding entry from the table. enabled(3) - this entry will reside in the table.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.69.4.2.10.1
Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.69.4.2.10.3
This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPCtrlEntry

swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.69.4.2.10.3.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
OBJECT-TYPE    
  SwL2IGMPCtrlEntry  

swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.69.4.2.10.3.1.1
This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.69.4.2.10.3.1.2
The frequency at which the IGMP Host-Query packets are transmitted on this switch.
OBJECT-TYPE    
  INTEGER 1..65535  

swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.69.4.2.10.3.1.3
The maximum query response time on this switch.
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPRobustness 1.3.6.1.4.1.171.11.69.4.2.10.3.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
OBJECT-TYPE    
  INTEGER 1..255  

swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.69.4.2.10.3.1.5
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.69.4.2.10.3.1.6
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer has expired. Please reference RFC2236-1997.
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.69.4.2.10.3.1.7
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.69.4.2.10.3.1.8
When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
OBJECT-TYPE    
  INTEGER 0..16711450  

swL2IGMPQueryState 1.3.6.1.4.1.171.11.69.4.2.10.3.1.9
This object decides if the IGMP query is enabled or disabled.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPCurrentState 1.3.6.1.4.1.171.11.69.4.2.10.3.1.10
This object indicates the current IGMP query state.
OBJECT-TYPE    
  INTEGER other(1), querier(2), non-querier(3)  

swL2IGMPCtrlState 1.3.6.1.4.1.171.11.69.4.2.10.3.1.11
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry.
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.69.4.2.10.3.1.12
This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for this entry. enable(3) - IGMP fast-leave funtion is enabled for this entry.
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.69.4.2.10.4
The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPQueryInfoEntry

swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.69.4.2.10.4.1
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled.
OBJECT-TYPE    
  SwL2IGMPQueryInfoEntry  

swL2IGMPInfoVid 1.3.6.1.4.1.171.11.69.4.2.10.4.1.1
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.69.4.2.10.4.1.2
This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.69.4.2.10.4.1.3
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTable 1.3.6.1.4.1.171.11.69.4.2.10.5
The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between the entries of the IGMP Table and the Filtering Table inside the switch H/W address table, the Filtering Table entry will overwrite the colliding entry of the IGMP Table. See swL2FilterMgmt description also.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPInfoEntry

swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.69.4.2.10.5.1
Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled.
OBJECT-TYPE    
  SwL2IGMPInfoEntry  

swL2IGMPVid 1.3.6.1.4.1.171.11.69.4.2.10.5.1.1
This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.69.4.2.10.5.1.2
This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis.
OBJECT-TYPE    
  IpAddress  

swL2IGMPMacAddr 1.3.6.1.4.1.171.11.69.4.2.10.5.1.3
This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis.
OBJECT-TYPE    
  MacAddress  

swL2IGMPPortMap 1.3.6.1.4.1.171.11.69.4.2.10.5.1.4
This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit has less then 32 port, the other ports don't care and just fill in zero.
OBJECT-TYPE    
  PortList  

swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.69.4.2.10.5.1.5
This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.69.4.2.10.6
The information of the IGMP snooping multicast VLAN table.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanEntry

swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.69.4.2.10.6.1
The entry of swL2IGMPMulticastVlanTable.
OBJECT-TYPE    
  SwL2IGMPMulticastVlanEntry  

swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.69.4.2.10.6.1.1
This object indicates the VLAN id of the IGMP snooping multicast VLAN entry.
OBJECT-TYPE    
  INTEGER 2..4094  

swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.69.4.2.10.6.1.2
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.69.4.2.10.6.1.3
This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.69.4.2.10.6.1.4
This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.69.4.2.10.6.1.5
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.69.4.2.10.7
The information of the router port table.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPRouterPortEntry

swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.69.4.2.10.7.1
The entry of swL2IGMPRouterPortTable.
OBJECT-TYPE    
  SwL2IGMPRouterPortEntry  

swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.69.4.2.10.7.1.1
This object indicates the VLAN id of the router port entry.
OBJECT-TYPE    
  INTEGER 1..4094  

swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.69.4.2.10.7.1.2
This object indicates the VLAN name of the router port entry.
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.69.4.2.10.7.1.3
This object indicates the static portlist of the router port entry.
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.69.4.2.10.7.1.4
This object indicates the dynamic portlist of the router port entry.
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.69.4.2.10.7.1.5
This object indicates the forbidden portlist of the router port entry.
OBJECT-TYPE    
  PortList  

swL2TrafficSegTable 1.3.6.1.4.1.171.11.69.4.2.13.1
This table specifies that the port can just forward traffic to the specific port list.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrafficSegEntry

swL2TrafficSegEntry 1.3.6.1.4.1.171.11.69.4.2.13.1.1
A list of information specifying the port with its traffic forward list.
OBJECT-TYPE    
  SwL2TrafficSegEntry  

swL2TrafficSegPort 1.3.6.1.4.1.171.11.69.4.2.13.1.1.1
The port number of the logical port.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.69.4.2.13.1.1.2
The port list that the specific port can forward traffic to.
OBJECT-TYPE    
  PortList  

swL2BroadcastSegCtrl 1.3.6.1.4.1.171.11.69.4.2.13.2
OBJECT IDENTIFIER    

swL2BroadcastSegFilterPorts 1.3.6.1.4.1.171.11.69.4.2.13.2.1
The port list that the specific port can filter broadcast packets from.
OBJECT-TYPE    
  PortList  

swL2BroadcastSegARPForwardPorts 1.3.6.1.4.1.171.11.69.4.2.13.2.2
The port list that the specific port can forward broadcast ARP packets to.
OBJECT-TYPE    
  PortList  

swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.69.4.2.14.1
The port security feature controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned addresses number reaches N, any incoming packet that has not learned a source address is discarded (e.g. dropped) and no more new addresses can be learned on this port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortSecurityControlEntry

swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.69.4.2.14.1.1
A list of information contained in the swL2PortSecurityControlTable.
OBJECT-TYPE    
  SwL2PortSecurityControlEntry  

swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.69.4.2.14.1.1.1
Indicates the secured port to lock address learning.
OBJECT-TYPE    
  INTEGER 1..255  

swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.69.4.2.14.1.1.2
Indicates allowable number of addresses to be learned at this port.
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortSecurityMode 1.3.6.1.4.1.171.11.69.4.2.14.1.1.3
Indicates the mode of locking address. In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer has expired. In this mode, when the locked address has aged out, the number of addresses that can be learned has to increase by one. In deleteOnReset (4) mode, the locked addresses are not aged out unless the system is restarted. This is to prevent port movement or intrusion.
OBJECT-TYPE    
  INTEGER other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)  

swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.69.4.2.14.1.1.4
Indicates the administration state of the locking address.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.69.4.2.14.2
When enable (2) is selected, whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged by the system.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2MgmtMIBTrapPrefix 1.3.6.1.4.1.171.11.69.4.2.15.0
OBJECT IDENTIFIER    

swL2macNotification 1.3.6.1.4.1.171.11.69.4.2.15.0.3
This trap indicate the MAC addresses variation in the address table .
NOTIFICATION-TYPE    

swL2porttypechgNotification 1.3.6.1.4.1.171.11.69.4.2.15.0.4
This trap indicates the port type change.
NOTIFICATION-TYPE    

swPowerStatusChg 1.3.6.1.4.1.171.11.69.4.2.15.0.5
Power Status change notification.
NOTIFICATION-TYPE    

swPowerFailure 1.3.6.1.4.1.171.11.69.4.2.15.0.6
Power Failure notification.
NOTIFICATION-TYPE    

swPowerRecover 1.3.6.1.4.1.171.11.69.4.2.15.0.7
Power Recover notification.
NOTIFICATION-TYPE    

swl2NotificationBidings 1.3.6.1.4.1.171.11.69.4.2.15.1
OBJECT IDENTIFIER    

swL2macNotifyInfo 1.3.6.1.4.1.171.11.69.4.2.15.1.1
This object indicates information about the last time the system rebooted.
OBJECT-TYPE    
  STRING Size(0..1024)  

swl2NotifyPortSecurity 1.3.6.1.4.1.171.11.69.4.2.15.2
OBJECT IDENTIFIER    

swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.69.4.2.15.2.1
This object indicates the MAC address that violated the port security configuration.
OBJECT-TYPE    
  MacAddress  

swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.69.4.2.15.2.2
When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out
NOTIFICATION-TYPE