DDM-MGMT-MIB

File: DDM-MGMT-MIB.mib (14599 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMP-FRAMEWORK-MIB
DLINK-ID-REC-MIB

Imported symbols

DisplayString MODULE-IDENTITY OBJECT-TYPE
SnmpAdminString dlink-common-mgmt

Defined Types

SwDdmStatusEntry  
SEQUENCE    
  swDdmPort INTEGER
  swDdmTemperature DisplayString
  swDdmVoltage DisplayString
  swDdmBiasCurrent DisplayString
  swDdmTxPower DisplayString
  swDdmRxPower DisplayString

SwDdmThresholdMgmtEntry  
SEQUENCE    
  swDdmThresholdType INTEGER
  swDdmHighAlarm DisplayString
  swDdmLowAlarm DisplayString
  swDdmHighWarning DisplayString
  swDdmLowWarning DisplayString

SwDdmActionMgmtEntry  
SEQUENCE    
  swDdmActionType INTEGER
  swDdmShutdown INTEGER
  swDdmTrapAndLog INTEGER

SwDdmPortMgmtEntry  
SEQUENCE    
  swDdmPortState INTEGER
  swDdmPortShutdown INTEGER

Defined Values

swDdmMIB 1.3.6.1.4.1.171.12.72
The structure of DDM for the proprietary enterprise.
MODULE-IDENTITY    

swDdmCtrl 1.3.6.1.4.1.171.12.72.1
OBJECT IDENTIFIER    

swDdmInfo 1.3.6.1.4.1.171.12.72.2
OBJECT IDENTIFIER    

swDdmMgmt 1.3.6.1.4.1.171.12.72.3
OBJECT IDENTIFIER    

swDdmNotify 1.3.6.1.4.1.171.12.72.4
OBJECT IDENTIFIER    

swDdmTrapState 1.3.6.1.4.1.171.12.72.1.1
This object indicates the trap action state.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDdmLogState 1.3.6.1.4.1.171.12.72.1.2
This object indicates the log action state.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDdmStatus 1.3.6.1.4.1.171.12.72.2.1
OBJECT IDENTIFIER    

swDdmStatusTable 1.3.6.1.4.1.171.12.72.2.1.1
This table contains the DDM status information.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDdmStatusEntry

swDdmStatusEntry 1.3.6.1.4.1.171.12.72.2.1.1.1
This is an entry of the swDdmStatusTable.
OBJECT-TYPE    
  SwDdmStatusEntry  

swDdmPort 1.3.6.1.4.1.171.12.72.2.1.1.1.1
This object indicates the port.
OBJECT-TYPE    
  INTEGER 1..65535  

swDdmTemperature 1.3.6.1.4.1.171.12.72.2.1.1.1.2
This object indicates the real time value of the temperature. As the value is a floating point data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmVoltage 1.3.6.1.4.1.171.12.72.2.1.1.1.3
This object indicates the real time value of the supply voltage. As the value value is a floating point data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmBiasCurrent 1.3.6.1.4.1.171.12.72.2.1.1.1.4
This object indicates the real time value of the tx bias.
OBJECT-TYPE    
  DisplayString  

swDdmTxPower 1.3.6.1.4.1.171.12.72.2.1.1.1.5
This object indicates the real time value of the tx power. As the value is a floating point data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmRxPower 1.3.6.1.4.1.171.12.72.2.1.1.1.6
This object indicates the real time value of the rx power. As the value is a floating data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmThresholdMgmt 1.3.6.1.4.1.171.12.72.3.1
OBJECT IDENTIFIER    

swDdmActionMgmt 1.3.6.1.4.1.171.12.72.3.2
OBJECT IDENTIFIER    

swDdmThresholdMgmtTable 1.3.6.1.4.1.171.12.72.3.1.1
This table contains DDM temperature configuration information.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDdmThresholdMgmtEntry

swDdmThresholdMgmtEntry 1.3.6.1.4.1.171.12.72.3.1.1.1
This is an entry of the swDdmConfigThresholdTable.
OBJECT-TYPE    
  SwDdmThresholdMgmtEntry  

swDdmThresholdType 1.3.6.1.4.1.171.12.72.3.1.1.1.1
This object indicates the threshold type.
OBJECT-TYPE    
  INTEGER temperature(1), voltage(2), bias(3), txPower(4), rxPower(5)  

swDdmHighAlarm 1.3.6.1.4.1.171.12.72.3.1.1.1.2
This object indicates the high alarm threshold value to be configured. As the value is a floating point data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmLowAlarm 1.3.6.1.4.1.171.12.72.3.1.1.1.3
This object indicates the low alarm threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmHighWarning 1.3.6.1.4.1.171.12.72.3.1.1.1.4
This object indicates the high warning threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmLowWarning 1.3.6.1.4.1.171.12.72.3.1.1.1.5
This object indicates the low warning threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
OBJECT-TYPE    
  DisplayString  

swDdmActionMgmtTable 1.3.6.1.4.1.171.12.72.3.2.1
This table contains the configuration of the action taken when any parameter exceeds its threshold.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDdmActionMgmtEntry

swDdmActionMgmtEntry 1.3.6.1.4.1.171.12.72.3.2.1.1
This is an entry of the swDdmConfigActionTable.
OBJECT-TYPE    
  SwDdmActionMgmtEntry  

swDdmActionType 1.3.6.1.4.1.171.12.72.3.2.1.1.1
This object indicates the action type.
OBJECT-TYPE    
  INTEGER alarm(1), warning(2)  

swDdmShutdown 1.3.6.1.4.1.171.12.72.3.2.1.1.2
This object indicates the shutdown action. The value 'other' means that the port does not support DDM.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), other(3)  

swDdmTrapAndLog 1.3.6.1.4.1.171.12.72.3.2.1.1.3
This object indicates the trap and log action. The value 'other' means that the port does not support DDM.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), other(3)  

swDdmPortMgmtTable 1.3.6.1.4.1.171.12.72.3.2.2
This table contains the configuration of the DDM state and shutdown mode when any parameter exceeds its threshold.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDdmPortMgmtEntry

swDdmPortMgmtEntry 1.3.6.1.4.1.171.12.72.3.2.2.1
This is an entry of the swDdmPortMgmtTable.
OBJECT-TYPE    
  SwDdmPortMgmtEntry  

swDdmPortState 1.3.6.1.4.1.171.12.72.3.2.2.1.1
This object indicates the DDM state information by port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDdmPortShutdown 1.3.6.1.4.1.171.12.72.3.2.2.1.2
This object indicates whether or not to shutdown the port on which the operating parameter exceeds the specified threshold.
OBJECT-TYPE    
  INTEGER alarm(1), warning(2), none(3), other(4)  

swDdmNotifyPrefix 1.3.6.1.4.1.171.12.72.4.0
OBJECT IDENTIFIER    

swDdmNotificationBinding 1.3.6.1.4.1.171.12.72.4.1
OBJECT IDENTIFIER    

swDdmAlarmTrap 1.3.6.1.4.1.171.12.72.4.0.1
The trap is sent when any parameter value exceeds the alarm threshold value or recover to normal status depending on the configuration of the trap action.
NOTIFICATION-TYPE    

swDdmWarningTrap 1.3.6.1.4.1.171.12.72.4.0.2
The trap is sent when any parameter value exceeds the warning threshold value or recover to normal status depending on the configuration of the trap action.
NOTIFICATION-TYPE    

swDdmThresholdExceedType 1.3.6.1.4.1.171.12.72.4.1.1
This object is used by swDdmAlarmTrap and swDdmWarningTrap to indicate if the threshold that was exceeded was a high threshold or a low threshold.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

swDdmThresholdExceedOrRecover 1.3.6.1.4.1.171.12.72.4.1.2
This object is used by swDdmAlarmTrap and swDdmWarningTrap,to indicate the GBIC is exceeding its ddm threshold or recover to normal status.
OBJECT-TYPE    
  INTEGER exceed(1), recover(2)