DC-OPT-MIB

File: DC-OPT-MIB.mib (19690 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge enterprises
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500DCChanStatTableEntry  
SEQUENCE    
  cdx6500DCChanStatChanNum INTEGER
  cdx6500DCChanStatTmOfLastStatRst DisplayString
  cdx6500DCChanStatChanState INTEGER
  cdx6500DCChanStatSourceChan DisplayString
  cdx6500DCChanStatDestChan DisplayString
  cdx6500DCChanStatXmitCRatio DisplayString
  cdx6500DCChanStatNumOfEncFrames Counter
  cdx6500DCChanStatNumOfCharInToEnc Counter
  cdx6500DCChanStatNumOfCharOutOfEnc Counter
  cdx6500DCChanStatNumOfDecFrames Counter
  cdx6500DCChanStatNumOfCharInToDec Counter
  cdx6500DCChanStatNumOfCharOutOfDec Counter
  cdx6500DCChanStatEncAETrnstnCnt Counter
  cdx6500DCChanStatEncAEFrameCnt Counter
  cdx6500DCChanStatEncAEModeStatus INTEGER
  cdx6500DCChanStatDecAETrnstnCnt Counter
  cdx6500DCChanStatDecAEFrameCnt Counter
  cdx6500DCChanStatDecAEModeStatus INTEGER
  cdx6500DCChanStatDSWithBadFrames Counter
  cdx6500DCChanStatDSWithBadHeaders Counter
  cdx6500DCChanStatDSDueToRstOrCng Counter

Cdx6500ContDCTableEntry  
SEQUENCE    
  cdx6500ContDCChanNum INTEGER
  cdx6500ContResetDCChanStats INTEGER
  cdx6500ContResetDCChanVocab INTEGER

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
OBJECT IDENTIFIER    

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

cdx6500DCStatTable 1.3.6.1.4.1.449.2.1.3.2.10
OBJECT IDENTIFIER    

cdx6500DCGenStatTable 1.3.6.1.4.1.449.2.1.3.2.10.1
OBJECT IDENTIFIER    

cdx6500DCGenStatTableEntry 1.3.6.1.4.1.449.2.1.3.2.10.1.1
OBJECT IDENTIFIER    

cdx6500DCGenStatDSPStatus 1.3.6.1.4.1.449.2.1.3.2.10.1.1.1
This parameter specifies the current status/existence of the DC SIMM/DSP on the motherboard. up - DC SIMM/DSP is installed and operational. down - DC SIMM/DSP is non-functional. missing - DC SIMM/DSP is missing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), missing(3)  

cdx6500DCGenStatHndlrSWRev 1.3.6.1.4.1.449.2.1.3.2.10.1.1.2
This parameter displays the DC Handler Software Revision Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCGenStatFnctnSWRev 1.3.6.1.4.1.449.2.1.3.2.10.1.1.3
DC Function Revision number. For example, revision number of DSP firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCGenStatMaxChannels 1.3.6.1.4.1.449.2.1.3.2.10.1.1.4
Number of DC Channels supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCGenStatChanInUse 1.3.6.1.4.1.449.2.1.3.2.10.1.1.5
Number of DC Channels in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCGenStatMaxSmltChanUse 1.3.6.1.4.1.449.2.1.3.2.10.1.1.6
Maximum number of DC Channels in use simultaneously since the last stats reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCGenStatRejectConn 1.3.6.1.4.1.449.2.1.3.2.10.1.1.7
Number of call requests rejected due to the unavailability of DC channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500DCGenStatAggCRatio 1.3.6.1.4.1.449.2.1.3.2.10.1.1.8
Ratio of total number of incoming charactersfor all DC channels to total number of outgoing characters for all channels, for the past minute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCGenStatCurrEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.9
Current number of frames in the encoder queue, waiting to be compressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cdx6500DCGenStatMaxEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.10
Maximum number of frames that were on the encoder queue since the last stats reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500DCGenStatTmOfMaxEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.11
Time when the maximum Encoder Queue Depth is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCGenStatCurrDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.12
Current number of frames in the decoder queue, waiting to be decompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

cdx6500DCGenStatMaxDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.13
Maximum number of frames that were on the decoder queue waiting to be decompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500DCGenStatTmOfMaxDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.14
Time when the maximum Decoder Queue Depth is reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCChanStatTable 1.3.6.1.4.1.449.2.1.3.2.10.2
The Data Compression Channel Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500DCChanStatTableEntry

cdx6500DCChanStatTableEntry 1.3.6.1.4.1.449.2.1.3.2.10.2.1
Each entry in this table pertains to the Data Compression Channel statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500DCChanStatTableEntry  

cdx6500DCChanStatChanNum 1.3.6.1.4.1.449.2.1.3.2.10.2.1.1
Channel number whose statistics were requested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500DCChanStatTmOfLastStatRst 1.3.6.1.4.1.449.2.1.3.2.10.2.1.2
Time when the node restarted or the stats reset by CTP/SNMP Manager command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCChanStatChanState 1.3.6.1.4.1.449.2.1.3.2.10.2.1.3
Activity state of the DC channel. dspDown - DSP is down. idle - DSP is ready to be assigned to a connection. negotiating - Source has accepted the Call Request and is waiting for a Call Accept from the destination node. dataPassing - Normal data passing state. apClearing - Call Clear request arrived from access side. npClearing - Call Clear request arrived from network side. clearingCall - A call collision or a Call Clear along with a X.25 reset or a `start buffer discarding'. flushingOnClr - Call has been cleared with FLUSH, waiting packets to flush from DC Handler rings. flushingData - Waiting for x25 confirm. flushingDCRing - Waiting for the data on the DC Handler ring to be flushed after a x.25 confirm or stop discard. clearing - Call has been cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dspDown(1), idle(2), negotiating(3), dataPassing(4), flushingData(5), flushingDCRing(6), apClearing(7), npClearing(8), clearingCall(9), flushingOnClr(10), clearing(11)  

cdx6500DCChanStatSourceChan 1.3.6.1.4.1.449.2.1.3.2.10.2.1.4
Access Protocol's identity string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCChanStatDestChan 1.3.6.1.4.1.449.2.1.3.2.10.2.1.5
Network Protocol's identity string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCChanStatXmitCRatio 1.3.6.1.4.1.449.2.1.3.2.10.2.1.6
Actual compression ratio for outgoing data. This is a 60 second snapshot. Range is 1 - 9.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500DCChanStatNumOfEncFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.7
Number of frames received from the Access Protocol to be compressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatNumOfCharInToEnc 1.3.6.1.4.1.449.2.1.3.2.10.2.1.8
Number of bytes pushed into the encoder to be compressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatNumOfCharOutOfEnc 1.3.6.1.4.1.449.2.1.3.2.10.2.1.9
Number of compressed bytes produced by the encoder.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatNumOfDecFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.10
Number of frames received from the Network Protocol to be decompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatNumOfCharInToDec 1.3.6.1.4.1.449.2.1.3.2.10.2.1.11
Number of bytes pushed into the decoder to be decompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatNumOfCharOutOfDec 1.3.6.1.4.1.449.2.1.3.2.10.2.1.12
Number of decompressed bytes produced by the decoder.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatEncAETrnstnCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.13
Number of times the encoder switched from compressed mode to anti-expansion mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatEncAEFrameCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.14
Number of anti-expansion frames sent by the encoder.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatEncAEModeStatus 1.3.6.1.4.1.449.2.1.3.2.10.2.1.15
Anti Expansion mode Status for Encoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cdx6500DCChanStatDecAETrnstnCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.16
Number of times the decoder switched from compressed mode to anti-expansion mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatDecAEFrameCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.17
Number of anti-expansion frames received by the decoder.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatDecAEModeStatus 1.3.6.1.4.1.449.2.1.3.2.10.2.1.18
Anti Expansion mode Status for Decoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cdx6500DCChanStatDSWithBadFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.19
Number of decoded frames detected by the decoder to have been corrupted. This includes frames with bad headers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatDSWithBadHeaders 1.3.6.1.4.1.449.2.1.3.2.10.2.1.20
Number of decoded frames detected by the decoder to have a bad header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500DCChanStatDSDueToRstOrCng 1.3.6.1.4.1.449.2.1.3.2.10.2.1.21
Number of packets discarded while processing a X.25 reset or during node congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500ContDC 1.3.6.1.4.1.449.2.1.4.9
OBJECT IDENTIFIER    

cdx6500ContResetAllDCStats 1.3.6.1.4.1.449.2.1.4.9.1
Reset the DC Statistics for all channels.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1), noreset(2)  

cdx6500ContDCTable 1.3.6.1.4.1.449.2.1.4.9.2
These resets require the channel number as the index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500ContDCTableEntry

cdx6500ContDCTableEntry 1.3.6.1.4.1.449.2.1.4.9.2.1
Each entry represents a control parameter used to reset Channel Statistics or Channel Vocabulary.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500ContDCTableEntry  

cdx6500ContDCChanNum 1.3.6.1.4.1.449.2.1.4.9.2.1.1
Channel number used as the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cdx6500ContResetDCChanStats 1.3.6.1.4.1.449.2.1.4.9.2.1.2
Reset the DC Statistics for this channel.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1), noreset(2)  

cdx6500ContResetDCChanVocab 1.3.6.1.4.1.449.2.1.4.9.2.1.3
Reset the vocabulary/history buffer for this channel if this channel number is active.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1), noreset(2)