D3I-MIB

File: D3I-MIB.mib (18003 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises experimental IpAddress
TimeTicks Gauge Counter
DisplayString OBJECT-TYPE

Defined Types

D3iIDEntry  
SEQUENCE    
  d3iIDIndex INTEGER
  d3iIDNACHardwareSerNum DisplayString
  d3iIDNICHardwareSerNum DisplayString
  d3iIDNACHardwareRev DisplayString
  d3iIDNICHardwareRev DisplayString
  d3iIDBoardManagerSwRev DisplayString
  d3iIDBoardManagerDate DisplayString

D3iCfgEntry  
SEQUENCE    
  d3iCfgIndex INTEGER
  d3iCfgPrimaryTimeSource INTEGER
  d3iCfgSecondaryTimeSource INTEGER
  d3iCfgTimeSourceSwitchMode INTEGER
  d3iCfgCLIPromptName DisplayString

D3iStatEntry  
SEQUENCE    
  d3iStatIndex INTEGER
  d3iStatSigPBusTxPktOkCnt Counter
  d3iStatSigPBusTxPktFldCnt Counter
  d3iStatSigPBusRxPktOkCnt Counter
  d3iStatSigPBusRxPktRjtCnt Counter
  d3iStatSigPBusConnState INTEGER
  d3iStatEnfasLinkDownCause INTEGER
  d3iStatPbClock INTEGER
  d3iStatTdmClock INTEGER

D3iCmdEntry  
SEQUENCE    
  d3iCmdIndex INTEGER
  d3iCmdMgtStationId OCTET STRING
  d3iCmdReqId INTEGER
  d3iCmdFunction INTEGER
  d3iCmdForce INTEGER
  d3iCmdParam OCTET STRING
  d3iCmdResult INTEGER
  d3iCmdCode INTEGER

D3iTeEntry  
SEQUENCE    
  d3iTeIndex INTEGER
  d3iTePbActive INTEGER
  d3iTePbLost INTEGER
  d3iTePbClockLossEvent INTEGER
  d3iTePbClockRestoreEvent INTEGER
  d3iTeTdmClockLost INTEGER
  d3iTeTdmClockRestored INTEGER
  d3iTeEnfasLinkUp INTEGER
  d3iTeEnfasLinkDown INTEGER
  d3iTeSystemReset INTEGER

Defined Values

usr 1.3.6.1.4.1.429
OBJECT IDENTIFIER    

nas 1.3.6.1.4.1.429.1
OBJECT IDENTIFIER    

d3i 1.3.6.1.4.1.429.1.43
OBJECT IDENTIFIER    

d3iID 1.3.6.1.4.1.429.1.43.1
OBJECT IDENTIFIER    

d3iIDTable 1.3.6.1.4.1.429.1.43.1.1
This table contains an entry for each of the manageable DS3 Ingress Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    D3iIDEntry

d3iIDEntry 1.3.6.1.4.1.429.1.43.1.1.1
There is one Identification table entry per DS3 Card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  D3iIDEntry  

d3iIDIndex 1.3.6.1.4.1.429.1.43.1.1.1.1
A unique value for each card in the chassis. The value of d3iIdIndex matches the value of the index for the corresponding card entity in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iIDNACHardwareSerNum 1.3.6.1.4.1.429.1.43.1.1.1.2
This object contains DS3 NAC module hardware serial number as stored in EEPROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

d3iIDNICHardwareSerNum 1.3.6.1.4.1.429.1.43.1.1.1.3
This object contains DS3 NIC module hardware serial number as stored in EEPROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

d3iIDNACHardwareRev 1.3.6.1.4.1.429.1.43.1.1.1.4
This object contains DS3 NAC module hardware revision as stored in EEPROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

d3iIDNICHardwareRev 1.3.6.1.4.1.429.1.43.1.1.1.5
This object contains DS3 NIC module hardware revision as stored in EEPROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

d3iIDBoardManagerSwRev 1.3.6.1.4.1.429.1.43.1.1.1.6
This object contains revision of the software being executed by the DS3 NAC board manager processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

d3iIDBoardManagerDate 1.3.6.1.4.1.429.1.43.1.1.1.7
This object contains board manager build date.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

d3iCfg 1.3.6.1.4.1.429.1.43.2
OBJECT IDENTIFIER    

d3iCfgTable 1.3.6.1.4.1.429.1.43.2.1
This table contains an entry for each of the manageable DS3 Ingress Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    D3iCfgEntry

d3iCfgEntry 1.3.6.1.4.1.429.1.43.2.1.1
There is one Configuration table entry per DS3 Card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  D3iCfgEntry  

d3iCfgIndex 1.3.6.1.4.1.429.1.43.2.1.1.1
A unique value for each card in the chassis. The value of d3iCfgIndex matches the value of the index for the corresponding card entity in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iCfgPrimaryTimeSource 1.3.6.1.4.1.429.1.43.2.1.1.2
This object contains Designation of primary system clock timing reference source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spanBITS(128), internal(129), throughTDM(130), span1(1), span2(2), span3(3), span4(4), span5(5), span6(6), span7(7), span8(8), span9(9), span10(10), span11(11), span12(12), span13(13), span14(14), span15(15), span16(16), span17(17), span18(18), span19(19), span20(20), span21(21), span22(22), span23(23), span24(24), span25(25), span26(26), span27(27), span28(28)  

d3iCfgSecondaryTimeSource 1.3.6.1.4.1.429.1.43.2.1.1.3
This object contains Designation of secondary system clock timing reference source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spanBITS(128), internal(129), throughTDM(130), span1(1), span2(2), span3(3), span4(4), span5(5), span6(6), span7(7), span8(8), span9(9), span10(10), span11(11), span12(12), span13(13), span14(14), span15(15), span16(16), span17(17), span18(18), span19(19), span20(20), span21(21), span22(22), span23(23), span24(24), span25(25), span26(26), span27(27), span28(28)  

d3iCfgTimeSourceSwitchMode 1.3.6.1.4.1.429.1.43.2.1.1.4
If a clock failure occurs on the currently active clock timing reference, this object specifies whether the switchover to the backup reference will be performed automatically or manually.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

d3iCfgCLIPromptName 1.3.6.1.4.1.429.1.43.2.1.1.5
This object is used to identify DS3 module's console prompt name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

d3iStat 1.3.6.1.4.1.429.1.43.3
OBJECT IDENTIFIER    

d3iStatTable 1.3.6.1.4.1.429.1.43.3.1
The Status table contains an entry for each DS3 card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    D3iStatEntry

d3iStatEntry 1.3.6.1.4.1.429.1.43.3.1.1
There is one entry for each DS3 card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  D3iStatEntry  

d3iStatIndex 1.3.6.1.4.1.429.1.43.3.1.1.1
A unique value for each DS3 card in the chassis. The value of this object matches the value of the index of the corresponding DS3 card's entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iStatSigPBusTxPktOkCnt 1.3.6.1.4.1.429.1.43.3.1.1.2
The number of successful packets transmitted over the signaling packet bus connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

d3iStatSigPBusTxPktFldCnt 1.3.6.1.4.1.429.1.43.3.1.1.3
The number of packets failed to transmit over the signaling packet bus connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

d3iStatSigPBusRxPktOkCnt 1.3.6.1.4.1.429.1.43.3.1.1.4
The number of successful packets received over the signaling packet bus connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

d3iStatSigPBusRxPktRjtCnt 1.3.6.1.4.1.429.1.43.3.1.1.5
The number of packets rejected by the DS3 NAC module message handling application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

d3iStatSigPBusConnState 1.3.6.1.4.1.429.1.43.3.1.1.6
The state of the signaling packet bus connection to the JHDM NAC. The loopback state means the DS3 has been requested, over the signaling packet bus link, to loopback all of its signaling channel received data. It will stay in this state until the DS3 sends an call control message to remove the loopback on this signaling connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER closed(1), opening(2), opened(3), configuring(4), ready(5), closing(6), loopback(7)  

d3iStatEnfasLinkDownCause 1.3.6.1.4.1.429.1.43.3.1.1.7
The reason for the E-NFAS signaling link going down. DisCmd: A DISC command was received over the packet bus signaling link. NACRemoval: A chassis awareness message indicated that the NAC connected to the E-NFAS link has been removed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), discCmd(2), nacRemoval(3)  

d3iStatPbClock 1.3.6.1.4.1.429.1.43.3.1.1.8
This object defines the current status of the packet bus clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(1), clockMaster(2), clockSlave(3), noClockPresent(4)  

d3iStatTdmClock 1.3.6.1.4.1.429.1.43.3.1.1.9
This object defines the current status of the TDM bus system clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(1), clockMaster(2), clockSlave(3), noClockPresent(4)  

d3iCmd 1.3.6.1.4.1.429.1.43.4
OBJECT IDENTIFIER    

d3iCmdTable 1.3.6.1.4.1.429.1.43.4.1
The DS3 card command table contains an entry for each of the manageable DS3 card in the chassis. It provides a means through which to take specific actions on the DS3 card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    D3iCmdEntry

d3iCmdEntry 1.3.6.1.4.1.429.1.43.4.1.1
There is one DS3 card command entry per DS3 card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  D3iCmdEntry  

d3iCmdIndex 1.3.6.1.4.1.429.1.43.4.1.1.1
A unique value for each DS3 card in the chassis. The value of this object matches the value of the index of the corresponding DS3 card's entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iCmdMgtStationId 1.3.6.1.4.1.429.1.43.4.1.1.2
This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with d3iCmdReqId and d3iCmdResult to detect interference from other MSs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

d3iCmdReqId 1.3.6.1.4.1.429.1.43.4.1.1.3
This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this DS3 card. If the request-id is unknown or undefined, this object contains the value zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iCmdFunction 1.3.6.1.4.1.429.1.43.4.1.1.4
This object contains a value which describes the command which is being invoked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noCommand(1), restoreCfgFromNvram(2), softwareReset(3), restoreDefaultUIPassword(4), restoreCfgFromDefaults(5), saveCfgtoNvram(6), d3iNICReset(7), d3iNICResetHold(8)  

d3iCmdForce 1.3.6.1.4.1.429.1.43.4.1.1.5
In some cases the DS3 card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER force(1), noForce(2)  

d3iCmdParam 1.3.6.1.4.1.429.1.43.4.1.1.6
This object contains parameters that are specific to the particular command being issued. In some cases, there will be no addtional parameters required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..24)  

d3iCmdResult 1.3.6.1.4.1.429.1.43.4.1.1.7
This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)  

d3iCmdCode 1.3.6.1.4.1.429.1.43.4.1.1.8
The value of this object upon commad completion indicates a futher description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed can be found in the status table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER userInterfaceActive(58), pendingSoftwareDownload(73)  

d3iTe 1.3.6.1.4.1.429.1.43.5
OBJECT IDENTIFIER    

d3iTeTable 1.3.6.1.4.1.429.1.43.5.1
The trap table containing an enable for each that the card is capable of generating. Some of these events occur often and traps may flood the network if care is not taken to avoid such conditions. These traps should be enabled sparingly.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    D3iTeEntry

d3iTeEntry 1.3.6.1.4.1.429.1.43.5.1.1
There is one entry for each DS3 card in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  D3iTeEntry  

d3iTeIndex 1.3.6.1.4.1.429.1.43.5.1.1.1
A unique value for each DS3 card in the chassis. The value of this object matches the value of the index of the corresponding DS3 card's entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

d3iTePbActive 1.3.6.1.4.1.429.1.43.5.1.1.2
Enables the Packet Bus Active Trap. Default is disableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTePbLost 1.3.6.1.4.1.429.1.43.5.1.1.3
Enables the Packet Bus lost Trap. Default is disableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTePbClockLossEvent 1.3.6.1.4.1.429.1.43.5.1.1.4
This object is used to disable the ability for a NAC to report when the packet bus clock has been lost. Defaule is diableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTePbClockRestoreEvent 1.3.6.1.4.1.429.1.43.5.1.1.5
This object is used to disable the ability for a NAC to report when the packet bus clock has been restored. Defaule is diableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTeTdmClockLost 1.3.6.1.4.1.429.1.43.5.1.1.6
Enables generation of an SNMP trap upon detection of TDM bus system clock lost. Default is disableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTeTdmClockRestored 1.3.6.1.4.1.429.1.43.5.1.1.7
Enables generation of an SNMP trap upon detection of TDM bus system clock restored. Default is disableAll(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTeEnfasLinkUp 1.3.6.1.4.1.429.1.43.5.1.1.8
The trap enable for ENFAS link coming up trap. Default is disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTeEnfasLinkDown 1.3.6.1.4.1.429.1.43.5.1.1.9
The trap enable for ENFAS link coming down trap. Default is disable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

d3iTeSystemReset 1.3.6.1.4.1.429.1.43.5.1.1.10
The trap enable disable for the DS3 system reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor