CYCLADES-ACS5K-CONF-MIB

File: CYCLADES-ACS5K-CONF-MIB.mib (26365 bytes)

Imported modules

CYCLADES-ACS5K-MIB IF-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

cyACS5KMgmt InterfaceIndexOrZero MODULE-IDENTITY
OBJECT-TYPE OBJECT-IDENTITY IpAddress
Integer32 DisplayString

Defined Types

CyGroupEntry  
SEQUENCE    
  cyGroupIndex InterfaceIndexOrZero
  cyGroupName DisplayString
  cyGroupUsers DisplayString

CySPortEntry  
SEQUENCE    
  cySPortNumber InterfaceIndexOrZero
  cySPortTty DisplayString
  cySPortName DisplayString
  cySPortSpeed INTEGER
  cySPortDataSize Integer32
  cySPortStopBits Integer32
  cySPortParity DisplayString
  cySPortFlowCtrl DisplayString
  cySPortDTRdelay Integer32
  cySPortDCDCtrl INTEGER
  cySPortLogUtmp INTEGER
  cySPortLogWtmp INTEGER
  cySPortLogform DisplayString
  cySPortAuthtype DisplayString
  cySPortAuthSrv1 DisplayString
  cySPortAccSrv1 DisplayString
  cySPortAuthTmo Integer32
  cySPortAuthRetr Integer32
  cySPortAuthSrv2 DisplayString
  cySPortAccSrv2 DisplayString
  cySPortAuthSecret DisplayString
  cySPortAuthRadP INTEGER
  cySPortAuthAcc DisplayString
  cySPortProtocol DisplayString
  cySPortRemoteIP DisplayString
  cySPortSocketPort DisplayString
  cySPortRemHost DisplayString
  cySPortBanner DisplayString
  cySPortPrompt DisplayString
  cySPortTermType DisplayString
  cySPortAutomUsr DisplayString
  cySPortNetMask IpAddress
  cySPortPppMtu Integer32
  cySPortPppMru Integer32
  cySPortPppOptions DisplayString
  cySPortPppFoption DisplayString
  cySPortModemChat DisplayString
  cySPortSttyCmd DisplayString
  cySPortSockTx Integer32
  cySPortSockPoll Integer32
  cySPortSockIdle Integer32
  cySPortDBsize Integer32
  cySPortDBtime INTEGER
  cySPortDBmode DisplayString
  cySPortDBsyslog Integer32
  cySPortDBmenu INTEGER
  cySPortDBalarm INTEGER
  cySPortSSHbreak DisplayString
  cySPortSniffSess DisplayString
  cySPortSniffAdm DisplayString
  cySPortSniffEsc DisplayString
  cySPortSniffMsess DisplayString
  cySPortTelnetMode INTEGER
  cySPortSysBufSess INTEGER
  cySPortLFSuppress INTEGER
  cySPortAutoInput DisplayString
  cySPortAutoOutput DisplayString
  cySPortPmType DisplayString
  cySPortPmUsers DisplayString
  cySPortPmOutlet DisplayString
  cySPortPmKey DisplayString
  cySPortPmNOutlets Integer32
  cySPortBreakInterval Integer32
  cySPortRemoteIP6 DisplayString
  cySPortPrefix6 Integer32

Defined Values

cyACS5KConf 1.3.6.1.4.1.2925.8.2
Configuration of ACS5000 products
MODULE-IDENTITY    

cyHostName 1.3.6.1.4.1.2925.8.2.1
The Host Name
OBJECT-TYPE    
  DisplayString Size(1..40)  

cyConsoleBanner 1.3.6.1.4.1.2925.8.2.2
The console banner
OBJECT-TYPE    
  DisplayString Size(1..255)  

cyMotd 1.3.6.1.4.1.2925.8.2.3
The motd message
OBJECT-TYPE    
  DisplayString Size(0..255)  

cyEthItf 1.3.6.1.4.1.2925.8.2.4
The configuration of the Ethernet Interface
OBJECT-IDENTITY    

cyEthDhcpc 1.3.6.1.4.1.2925.8.2.4.1
The ACS can request all of its ethernet parameters to a DHCP server
OBJECT-TYPE    
  INTEGER inactive(0), active(1), restore(2)  

cyEthIPaddr 1.3.6.1.4.1.2925.8.2.4.2
This is the IP address of the Ethernet Interface
OBJECT-TYPE    
  IpAddress  

cyEthIPmask 1.3.6.1.4.1.2925.8.2.4.3
The mask fot the Ethernet network
OBJECT-TYPE    
  IpAddress  

cyEthMTU 1.3.6.1.4.1.2925.8.2.4.4
The Maximum Transmission Unit size, wich determines whether or not packets should be broken up
OBJECT-TYPE    
  Integer32  

cyEthIPaddr2 1.3.6.1.4.1.2925.8.2.4.5
The Ethernet secondary IP address
OBJECT-TYPE    
  IpAddress  

cyEthIPmask2 1.3.6.1.4.1.2925.8.2.4.6
The Ethernet secondary IP mask
OBJECT-TYPE    
  IpAddress  

cyEnableIPv4 1.3.6.1.4.1.2925.8.2.4.7
This parameter is used to enable or disable the configuration of IPv4 addresses
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

cyEnableIPv6 1.3.6.1.4.1.2925.8.2.4.8
This parameter is used to enable or disable the configuration of IPv6 addresses
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

cyIPv6Method 1.3.6.1.4.1.2925.8.2.4.9
IPv6 configuration method
OBJECT-TYPE    
  INTEGER stateless-only(0), static(1), dhcp(2)  

cyDHCPv6Opts 1.3.6.1.4.1.2925.8.2.4.10
DHCP options for IPv6
OBJECT-TYPE    
  INTEGER none(0), dns(1), domain(2), dns-domain(3)  

cyEthIPaddr6 1.3.6.1.4.1.2925.8.2.4.11
This is the IPv6 address of the Ethernet Interface
OBJECT-TYPE    
  DisplayString  

cyEthPrefix6 1.3.6.1.4.1.2925.8.2.4.12
IPv6 network prefix length of the Ethernet Interface
OBJECT-TYPE    
  Integer32  

cyNameService 1.3.6.1.4.1.2925.8.2.5
The Name Service configuration
OBJECT-IDENTITY    

cyResolverOrder 1.3.6.1.4.1.2925.8.2.5.1
It specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts'
OBJECT-TYPE    
  DisplayString Size(0..15)  

cyMultipleIP 1.3.6.1.4.1.2925.8.2.5.2
Valid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only the first.
OBJECT-TYPE    
  DisplayString Size(0..3)  

cyDNSserv 1.3.6.1.4.1.2925.8.2.5.3
The DNS server configuration
OBJECT-IDENTITY    

cyDNSpriserv 1.3.6.1.4.1.2925.8.2.5.3.1
Internet Address (in dot notation) of primary name server that the resolver should query.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cyDNSsecserv 1.3.6.1.4.1.2925.8.2.5.3.2
Internet Address (in dot notation) of secondary name server that the resolver should query.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cyDNSdomain 1.3.6.1.4.1.2925.8.2.5.3.3
Local domain name .
OBJECT-TYPE    
  DisplayString Size(1..40)  

cySerialPortConf 1.3.6.1.4.1.2925.8.2.6
The PortSlave configuration - pslave.conf file. It configures the all serial ports.
OBJECT-IDENTITY    

cySerialGlobal 1.3.6.1.4.1.2925.8.2.6.1
These parameters have the prefix conf. in the pslave.conf file
OBJECT-IDENTITY    

cySerialInclude 1.3.6.1.4.1.2925.8.2.6.1.1
File used in centralized management.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySerialNFS 1.3.6.1.4.1.2925.8.2.6.1.2
Remote Network File System where data buffering will be written instead of the default directory '/var/run/DB'.
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialLockDir 1.3.6.1.4.1.2925.8.2.6.1.3
The lock directory for the ACS.
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialRlogin 1.3.6.1.4.1.2925.8.2.6.1.4
Location of the rlogin binary that accepts the -i flag.
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialPppd 1.3.6.1.4.1.2925.8.2.6.1.5
Location of the pppd binary.
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialTelnet 1.3.6.1.4.1.2925.8.2.6.1.6
Location of the telnet application
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialSsh 1.3.6.1.4.1.2925.8.2.6.1.7
Location of the ssh application
OBJECT-TYPE    
  DisplayString Size(0..50)  

cySerialLocalLogins 1.3.6.1.4.1.2925.8.2.6.1.8
This parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

cySerialFacility 1.3.6.1.4.1.2925.8.2.6.1.9
This value (0-7) is the Local facility sent to the syslog daemon.
OBJECT-TYPE    
  Integer32  

cySerialDBFacility 1.3.6.1.4.1.2925.8.2.6.1.10
This value (0-7) is the Local facility sent to the syslog daemon with the data when .
OBJECT-TYPE    
  Integer32  

cySerialGroupTable 1.3.6.1.4.1.2925.8.2.6.1.11
This associates group name and its users
OBJECT-TYPE    
  SEQUENCE OF  
    CyGroupEntry

cygroupEntry 1.3.6.1.4.1.2925.8.2.6.1.11.1
One particular association between group name and its users
OBJECT-TYPE    
  CyGroupEntry  

cyGroupIndex 1.3.6.1.4.1.2925.8.2.6.1.11.1.1
number to identifier the group
OBJECT-TYPE    
  InterfaceIndexOrZero  

cyGroupName 1.3.6.1.4.1.2925.8.2.6.1.11.1.2
The Group Name
OBJECT-TYPE    
  DisplayString Size(0..20)  

cyGroupUsers 1.3.6.1.4.1.2925.8.2.6.1.11.1.3
The users names
OBJECT-TYPE    
  DisplayString Size(0..80)  

cySerialSpec 1.3.6.1.4.1.2925.8.2.6.2
These parameters have the prefix all. or sxx. in the pslave.conf file
OBJECT-IDENTITY    

cySerialPortTable 1.3.6.1.4.1.2925.8.2.6.2.1
This is the specific configuration to serial port
OBJECT-TYPE    
  SEQUENCE OF  
    CySPortEntry

cysportEntry 1.3.6.1.4.1.2925.8.2.6.2.1.1
One particular serial port configuration
OBJECT-TYPE    
  CySPortEntry  

cySPortNumber 1.3.6.1.4.1.2925.8.2.6.2.1.1.1
number to identifier the serial port. Value 0 is ALL.
OBJECT-TYPE    
  InterfaceIndexOrZero  

cySPortTty 1.3.6.1.4.1.2925.8.2.6.2.1.1.2
The device name for the serial port.
OBJECT-TYPE    
  DisplayString Size(0..25)  

cySPortName 1.3.6.1.4.1.2925.8.2.6.2.1.1.3
Alias name given to the server connected to the serial port.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortSpeed 1.3.6.1.4.1.2925.8.2.6.2.1.1.4
The speed for serial port.
OBJECT-TYPE    
  INTEGER s50bps(50), s75bps(75), s110bps(110), s134bps(134), s150bps(150), s200bps(200), s300bps(300), s600bps(600), s1200bps(1200), s1800bps(1800), s2400bps(2400), s4800bps(4800), s9600bps(9600), s14400bps(14400), s19200bps(19200), s28800bps(28800), s38400bps(38400), s57600bps(57600), s115200bps(115200), s230400bps(230400), s460800bps(460800)  

cySPortDataSize 1.3.6.1.4.1.2925.8.2.6.2.1.1.5
The data size for serial port.
OBJECT-TYPE    
  Integer32 4..8  

cySPortStopBits 1.3.6.1.4.1.2925.8.2.6.2.1.1.6
The number of stop bits for serial port.
OBJECT-TYPE    
  Integer32 1..2  

cySPortParity 1.3.6.1.4.1.2925.8.2.6.2.1.1.7
The parity for serial port.
OBJECT-TYPE    
  DisplayString Size(0..5)  

cySPortFlowCtrl 1.3.6.1.4.1.2925.8.2.6.2.1.1.8
The flow control for serial port.
OBJECT-TYPE    
  DisplayString Size(0..5)  

cySPortDTRdelay 1.3.6.1.4.1.2925.8.2.6.2.1.1.9
This specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again.
OBJECT-TYPE    
  Integer32  

cySPortDCDCtrl 1.3.6.1.4.1.2925.8.2.6.2.1.1.10
DCD signal controls the connection request.
OBJECT-TYPE    
  INTEGER notctrl(0), control(1)  

cySPortLogUtmp 1.3.6.1.4.1.2925.8.2.6.2.1.1.11
ACS update the login records in /var/run/utmp file.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortLogWtmp 1.3.6.1.4.1.2925.8.2.6.2.1.1.12
ACS update the login records in /var/run/wtmp file.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortLogform 1.3.6.1.4.1.2925.8.2.6.2.1.1.13
This is the format to write login record.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortAuthtype 1.3.6.1.4.1.2925.8.2.6.2.1.1.14
Authentication type : .
OBJECT-TYPE    
  DisplayString Size(0..25)  

cySPortAuthSrv1 1.3.6.1.4.1.2925.8.2.6.2.1.1.15
IP address of the primary authentication server.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortAccSrv1 1.3.6.1.4.1.2925.8.2.6.2.1.1.16
IP address of the primary accounting server.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortAuthTmo 1.3.6.1.4.1.2925.8.2.6.2.1.1.17
This is the timeout (in seconds) for authentication query to be answered.
OBJECT-TYPE    
  Integer32  

cySPortAuthRetr 1.3.6.1.4.1.2925.8.2.6.2.1.1.18
This defines the number of times each server is tried before another is contacted.
OBJECT-TYPE    
  Integer32  

cySPortAuthSrv2 1.3.6.1.4.1.2925.8.2.6.2.1.1.19
IP address of the secondary authentication server.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortAccSrv2 1.3.6.1.4.1.2925.8.2.6.2.1.1.20
IP address of the secondary accounting server.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortAuthSecret 1.3.6.1.4.1.2925.8.2.6.2.1.1.21
This is the shared secret with authentciation servers.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortAuthRadP 1.3.6.1.4.1.2925.8.2.6.2.1.1.22
To accept Radius' user without password.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortAuthAcc 1.3.6.1.4.1.2925.8.2.6.2.1.1.23
access restrition on Users.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortProtocol 1.3.6.1.4.1.2925.8.2.6.2.1.1.24
Defines the port serial's protocol.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortRemoteIP 1.3.6.1.4.1.2925.8.2.6.2.1.1.25
This is the default IP address of the serial port.
OBJECT-TYPE    
  DisplayString Size(0..20)  

cySPortSocketPort 1.3.6.1.4.1.2925.8.2.6.2.1.1.26
This defines an alternative labeling system for the serial port.
OBJECT-TYPE    
  DisplayString Size(0..10)  

cySPortRemHost 1.3.6.1.4.1.2925.8.2.6.2.1.1.27
The IP address of the host to which the serial port will connect.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortBanner 1.3.6.1.4.1.2925.8.2.6.2.1.1.28
This defines the banner.
OBJECT-TYPE    
  DisplayString Size(0..250)  

cySPortPrompt 1.3.6.1.4.1.2925.8.2.6.2.1.1.29
This defines the login prompt to the serial port.
OBJECT-TYPE    
  DisplayString Size(0..250)  

cySPortTermType 1.3.6.1.4.1.2925.8.2.6.2.1.1.30
This defines the terminal type.
OBJECT-TYPE    
  DisplayString Size(0..20)  

cySPortAutomUsr 1.3.6.1.4.1.2925.8.2.6.2.1.1.31
This defines the automatic user.
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortNetMask 1.3.6.1.4.1.2925.8.2.6.2.1.1.32
The network mask used in dial in connection.
OBJECT-TYPE    
  IpAddress  

cySPortPppMtu 1.3.6.1.4.1.2925.8.2.6.2.1.1.33
The PPP MTU - dial in connection.
OBJECT-TYPE    
  Integer32  

cySPortPppMru 1.3.6.1.4.1.2925.8.2.6.2.1.1.34
The PPP MRU - dial in connection.
OBJECT-TYPE    
  Integer32  

cySPortPppOptions 1.3.6.1.4.1.2925.8.2.6.2.1.1.35
The PPP options when ACS autodetects the PPP session .
OBJECT-TYPE    
  DisplayString  

cySPortPppFoption 1.3.6.1.4.1.2925.8.2.6.2.1.1.36
The PPP forced options when the user has already been authenticated.
OBJECT-TYPE    
  DisplayString  

cySPortModemChat 1.3.6.1.4.1.2925.8.2.6.2.1.1.37
The initchat send to modem connected.
OBJECT-TYPE    
  DisplayString  

cySPortSttyCmd 1.3.6.1.4.1.2925.8.2.6.2.1.1.38
the tty settings after socket connection is established.
OBJECT-TYPE    
  DisplayString Size(0..180)  

cySPortSockTx 1.3.6.1.4.1.2925.8.2.6.2.1.1.39
Defines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port .
OBJECT-TYPE    
  Integer32  

cySPortSockPoll 1.3.6.1.4.1.2925.8.2.6.2.1.1.40
Keep-alive timer (miliseconds) to the TCP connection .
OBJECT-TYPE    
  Integer32  

cySPortSockIdle 1.3.6.1.4.1.2925.8.2.6.2.1.1.41
The idle timeout in seconds .
OBJECT-TYPE    
  Integer32  

cySPortDBsize 1.3.6.1.4.1.2925.8.2.6.2.1.1.42
Maximum size of the data buffering file.
OBJECT-TYPE    
  Integer32  

cySPortDBtime 1.3.6.1.4.1.2925.8.2.6.2.1.1.43
Timestamp in data buffering.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortDBmode 1.3.6.1.4.1.2925.8.2.6.2.1.1.44
Data buffering mode : circ or line
OBJECT-TYPE    
  DisplayString Size(0..5)  

cySPortDBsyslog 1.3.6.1.4.1.2925.8.2.6.2.1.1.45
size of the data buffering send to syslog.
OBJECT-TYPE    
  Integer32  

cySPortDBmenu 1.3.6.1.4.1.2925.8.2.6.2.1.1.46
Menu of the data buffering.
OBJECT-TYPE    
  INTEGER displayMenu(0), inactive(1), displayDB(2), displayParc(3)  

cySPortDBalarm 1.3.6.1.4.1.2925.8.2.6.2.1.1.47
Generating Alarms.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortSSHbreak 1.3.6.1.4.1.2925.8.2.6.2.1.1.48
Break sequence - ssh session
OBJECT-TYPE    
  DisplayString Size(0..16)  

cySPortSniffSess 1.3.6.1.4.1.2925.8.2.6.2.1.1.49
Sniff session type
OBJECT-TYPE    
  DisplayString Size(0..5)  

cySPortSniffAdm 1.3.6.1.4.1.2925.8.2.6.2.1.1.50
List of admin users to sniff session
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortSniffEsc 1.3.6.1.4.1.2925.8.2.6.2.1.1.51
Escape sequence used in sniff session
OBJECT-TYPE    
  DisplayString Size(0..6)  

cySPortSniffMsess 1.3.6.1.4.1.2925.8.2.6.2.1.1.52
Multiple sniff sessions
OBJECT-TYPE    
  DisplayString Size(0..20)  

cySPortTelnetMode 1.3.6.1.4.1.2925.8.2.6.2.1.1.53
Mode negotiated by client telnet with the server
OBJECT-TYPE    
  INTEGER text(0), binary(1)  

cySPortSysBufSess 1.3.6.1.4.1.2925.8.2.6.2.1.1.54
Syslog Buffering at all times
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

cySPortLFSuppress 1.3.6.1.4.1.2925.8.2.6.2.1.1.55
LF suppression in socket_server session
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

cySPortAutoInput 1.3.6.1.4.1.2925.8.2.6.2.1.1.56
This string is used to auto answer. It's the input string
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortAutoOutput 1.3.6.1.4.1.2925.8.2.6.2.1.1.57
This string is used to auto answer. It's the output string
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortPmType 1.3.6.1.4.1.2925.8.2.6.2.1.1.58
IPDU type, when the port protocol is configured as IPDU
OBJECT-TYPE    
  DisplayString Size(0..20)  

cySPortPmUsers 1.3.6.1.4.1.2925.8.2.6.2.1.1.59
List of users which can access the IPDU and their respective outlets
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortPmOutlet 1.3.6.1.4.1.2925.8.2.6.2.1.1.60
List of . pairs, where the server is connected
OBJECT-TYPE    
  DisplayString Size(0..40)  

cySPortPmKey 1.3.6.1.4.1.2925.8.2.6.2.1.1.61
Hotkey to grant access to the Power Management from a Telnet/SSH session
OBJECT-TYPE    
  DisplayString Size(0..8)  

cySPortPmNOutlets 1.3.6.1.4.1.2925.8.2.6.2.1.1.62
Number of outlets of the IPDU
OBJECT-TYPE    
  Integer32  

cySPortBreakInterval 1.3.6.1.4.1.2925.8.2.6.2.1.1.63
The break interval in miliseconds.
OBJECT-TYPE    
  Integer32  

cySPortRemoteIP6 1.3.6.1.4.1.2925.8.2.6.2.1.1.64
This is the default IPv6 address of the serial port.
OBJECT-TYPE    
  DisplayString Size(0..46)  

cySPortPrefix6 1.3.6.1.4.1.2925.8.2.6.2.1.1.65
Port IP address network prefix length.
OBJECT-TYPE    
  Integer32 0..128