CXBsc-MIB

File: CXBsc-MIB.mib (35404 bytes)

Imported modules

RFC1155-SMI RFC-1212 CXProduct-SMI

Imported symbols

Counter TimeTicks OBJECT-TYPE
cxBsc SapIndex Alias

Defined Types

BscCuIndex  
INTEGER 0..64    

BscDevIndex  
INTEGER 0..127    

BscRowStatus  
INTEGER invalid(1), valid(2)    

BscAckMode  
INTEGER endToEnd(1), local(2)    

BscOperationalMode  
INTEGER offline(1), online(2)    

BscBlockSize  
INTEGER block128(1), block256(2), block512(3), block1k(4), block2k(5), block3000(6), block5k(7)    

BscStatusSense  
INTEGER notSet(1), isSet(2)    

BscSapEntry  
SEQUENCE    
  bscSapNumber SapIndex
  bscSapRowStatus BscRowStatus
  bscSapType INTEGER
  bscSapInterfaceType INTEGER
  bscSapAlias Alias
  bscSapCompanionAlias Alias
  bscSapSnalcRef INTEGER
  bscPollIntAfterAckTimer TimeTicks
  bscSapControl INTEGER
  bscSapOperationalMode BscOperationalMode
  bscSapLinkStatus INTEGER
  bscSapLinkChange Counter
  bscSapOverrun Counter
  bscSapParityError Counter
  bscSapCrcError Counter
  bscSapBlockReject Counter

BscCuEntry  
SEQUENCE    
  bscCuSapNumber SapIndex
  bscCuNumber BscCuIndex
  bscCuRowStatus BscRowStatus
  bscCuHwdType INTEGER
  bscCuMaxBlockLength BscBlockSize
  bscCuPollTimeout INTEGER
  bscCuDelayTimer INTEGER
  bscCuRetryCounter INTEGER
  bscCuETBAck BscAckMode
  bscCuETXAck BscAckMode
  bscCuControl INTEGER
  bscCuOperationalMode BscOperationalMode
  bscCuConnectionStatus INTEGER
  bscCuConnectRequest Counter
  bscCuDisconnectRequest Counter
  bscCuDisconnectIndication Counter
  bscCuEndToEndConnectCnf Counter
  bscCuSnalcRxRnr Counter
  bscCuSnalcRxRr Counter

BscDevEntry  
SEQUENCE    
  bscDevSapNumber SapIndex
  bscDevCuNumber BscCuIndex
  bscDevNumber BscDevIndex
  bscDevRowStatus BscRowStatus
  bscDevType INTEGER
  bscDevControl INTEGER
  bscDevOperationalMode BscOperationalMode
  bscDevConnectionStatus INTEGER
  bscDevState INTEGER
  bscDevSSDeviceBusy BscStatusSense
  bscDevSSUnitSpecify BscStatusSense
  bscDevSSDeviceEnd BscStatusSense
  bscDevSSTransmissionCheck BscStatusSense
  bscDevSSCommandReject BscStatusSense
  bscDevSSInterventionRequired BscStatusSense
  bscDevSSEquipmentCheck BscStatusSense
  bscDevSSDataCheck BscStatusSense
  bscDevSSControlCheck BscStatusSense
  bscDevSSOperationCheck BscStatusSense
  bscDevGeneralPoll Counter
  bscDevSpecificPoll Counter
  bscDevDeviceSelection Counter
  bscDevTestRequest Counter
  bscDevHostWrite Counter
  bscDevHostRead Counter
  bscDevHostControl Counter
  bscDevCuShortRead Counter
  bscDevTxBlocks Counter
  bscDevRxBlocks Counter
  bscDevStatusSense Counter
  bscDevError Counter
  bscDevErrTimeout Counter
  bscDevCircuitEnable Counter
  bscDevCircuitDisconnect Counter
  bscDevCircuitRequest Counter
  bscDevTxCommands Counter
  bscDevRxCommands Counter
  bscDevCommandsQueued Counter
  bscDevBlocksQueued Counter
  bscDevTxRvi Counter
  bscDevRxRvi Counter
  bscDevTxTtd Counter
  bscDevRxTtd Counter
  bscDevTxWack Counter
  bscDevRxWack Counter

Defined Values

bscSapTable 1.3.6.1.4.1.495.2.1.6.56.10
A table containing configuration information about all the service access point.
OBJECT-TYPE    
  SEQUENCE OF  
    BscSapEntry

bscSapEntry 1.3.6.1.4.1.495.2.1.6.56.10.1
The parameters for a particular service access point.
OBJECT-TYPE    
  BscSapEntry  

bscSapNumber 1.3.6.1.4.1.495.2.1.6.56.10.1.1
Identifies the service access point by a numerical value. This value is used as a index in the saps table. Values are unique per service access point.
OBJECT-TYPE    
  SapIndex  

bscSapRowStatus 1.3.6.1.4.1.495.2.1.6.56.10.1.2
Indicates whether the particular service access point is configured within the MIB. Service access point entries (rows) may be created by setting this object value to 'valid', or deleted by changing this object value to 'invalid'. Whether or not the row actually disappears is left to the implementation so this object may actually read as 'invalid' for some arbitrary length of time.
OBJECT-TYPE    
  BscRowStatus  

bscSapType 1.3.6.1.4.1.495.2.1.6.56.10.1.3
Identifies the service access point by type:'lower' identifies a SAP leading to a physical BSC port. 'Upper' identifies a SAP acting as an internal inter-layer logical port.
OBJECT-TYPE    
  INTEGER lower(1), upper(2)  

bscSapInterfaceType 1.3.6.1.4.1.495.2.1.6.56.10.1.4
Identifies the type of controller: either TIU or HIU.
OBJECT-TYPE    
  INTEGER terminalInterfaceUnit(1), hostInterfaceUnit(2)  

bscSapAlias 1.3.6.1.4.1.495.2.1.6.56.10.1.5
Identifies the service access point by a textual name. Names are unique per service access point.
OBJECT-TYPE    
  Alias  

bscSapCompanionAlias 1.3.6.1.4.1.495.2.1.6.56.10.1.6
Identifies the `lower' service access point that will communicate with this service access point by a textual name. Names are unique per service access point. Used to bind the BSC Sap with the COP driver sap.
OBJECT-TYPE    
  Alias  

bscSapSnalcRef 1.3.6.1.4.1.495.2.1.6.56.10.1.7
Identifies which upper sap is associated to the lower sap within the BSC module. Applies only to lower BSC saps.
OBJECT-TYPE    
  INTEGER 0..8  

bscPollIntAfterAckTimer 1.3.6.1.4.1.495.2.1.6.56.10.1.8
This object applies only to a service access point functioning as a TIU. Determines the length of time allowed to elapse between the reception of an acknowledgment to a poll and the transmission of the next poll. Certain control units require a delay in order to successfully respond to polls. Since multiple BSC logical links may share the same SAP (i.e., multiple control units communicating on the same physical link), this timer applies globally to all logical links using this SAP. Range of values: 1 - 250 (in tenths of a second), a value of 0 disables the timer.
OBJECT-TYPE    
  TimeTicks  

bscSapControl 1.3.6.1.4.1.495.2.1.6.56.10.1.20
Control associated with the specified service access point.
OBJECT-TYPE    
  INTEGER clearStats(1)  

bscSapOperationalMode 1.3.6.1.4.1.495.2.1.6.56.10.1.30
Identifies the service access point as being active or non-active with the new configuration.
OBJECT-TYPE    
  BscOperationalMode  

bscSapLinkStatus 1.3.6.1.4.1.495.2.1.6.56.10.1.31
Indicates the physical status of the sap with respect to its associated cop.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

bscSapLinkChange 1.3.6.1.4.1.495.2.1.6.56.10.1.40
Indicates the number of times the physical link has been brought up.
OBJECT-TYPE    
  Counter  

bscSapOverrun 1.3.6.1.4.1.495.2.1.6.56.10.1.41
Identifies the number of block overrun's received by this sap.
OBJECT-TYPE    
  Counter  

bscSapParityError 1.3.6.1.4.1.495.2.1.6.56.10.1.42
Identifies the number of blocks received with parity errors.
OBJECT-TYPE    
  Counter  

bscSapCrcError 1.3.6.1.4.1.495.2.1.6.56.10.1.43
Identifies the number of blocks with CRC errors.
OBJECT-TYPE    
  Counter  

bscSapBlockReject 1.3.6.1.4.1.495.2.1.6.56.10.1.44
Identifies the number of blocks received whose frame size is greater than that configured.
OBJECT-TYPE    
  Counter  

bscCuTable 1.3.6.1.4.1.495.2.1.6.56.11
A table containing configuration information about all the 3270 controller units.
OBJECT-TYPE    
  SEQUENCE OF  
    BscCuEntry

bscCuEntry 1.3.6.1.4.1.495.2.1.6.56.11.1
The parameters for a particular controller unit.
OBJECT-TYPE    
  BscCuEntry  

bscCuSapNumber 1.3.6.1.4.1.495.2.1.6.56.11.1.1
Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique with one sap. However, the address is not required to be unique between saps. This object is an index in the sap Table. Values are unique.
OBJECT-TYPE    
  SapIndex  

bscCuNumber 1.3.6.1.4.1.495.2.1.6.56.11.1.2
Identifies the address of this controller unit. The address has to be unique for a specified sap.
OBJECT-TYPE    
  BscCuIndex  

bscCuRowStatus 1.3.6.1.4.1.495.2.1.6.56.11.1.3
Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value to 'valid', or deleted by changing this object value to 'invalid'. Whether or not the row actually disappears is left to the implementation so this object may actually read as 'invalid' for some arbitrary length of time.
OBJECT-TYPE    
  BscRowStatus  

bscCuHwdType 1.3.6.1.4.1.495.2.1.6.56.11.1.4
Identifies the controller unit type.
OBJECT-TYPE    
  INTEGER cu3271(1), cu3274(2), cu3275(3), cu3276(4), cuMES(5)  

bscCuMaxBlockLength 1.3.6.1.4.1.495.2.1.6.56.11.1.5
Identifies the maximal length of the blocks exchanged between the host/terminal and the BSC module. The value is measured in octets and is specified by the BSC protocol. The DEFVAL value will be 'block3000' or 'block256', depending if the sap is configurated as 'hostInterfaceUnit' or 'terminalInterfaceUnit' (see the object 'bscSapInterfaceType').
OBJECT-TYPE    
  BscBlockSize  

bscCuPollTimeout 1.3.6.1.4.1.495.2.1.6.56.11.1.6
Identifies the number of seconds a station waits for an answer. The value is measured in tenth of seconds.
OBJECT-TYPE    
  INTEGER 1..250  

bscCuDelayTimer 1.3.6.1.4.1.495.2.1.6.56.11.1.7
Identifies the number of seconds the emulated station may delay the sending of a block. Timer is in tenth of seconds.
OBJECT-TYPE    
  INTEGER 1..250  

bscCuRetryCounter 1.3.6.1.4.1.495.2.1.6.56.11.1.8
Identifies the number of retries are executed, before a command fails. It is used by the host/terminal and the BSC layer.
OBJECT-TYPE    
  INTEGER 1..50  

bscCuETBAck 1.3.6.1.4.1.495.2.1.6.56.11.1.9
Identifies if the acknowledgement is local or end to end for ETBs. The ETB is a trailer block delimitator.. The 'endToEnd' means each block is acknowledged to the sender after receiving a confirmation from the remote BSC. The 'local' means the block is acknowledged locally. The block initiator is notified the block was received by the peer BSC layer.
OBJECT-TYPE    
  BscAckMode  

bscCuETXAck 1.3.6.1.4.1.495.2.1.6.56.11.1.10
Identifies if the acknowledgement is local or end to end for ETXs. The ETX is a trailer command delimitator.. The 'endToEnd' means the command is acknowledged to the sender after receiving a confirmation from the remote BSC. The 'local' means the command is acknowledged locally. The command initiator is notified the command was completed by the BSC layer. It doesn't garranty the command was completed by the remote BSC.
OBJECT-TYPE    
  BscAckMode  

bscCuControl 1.3.6.1.4.1.495.2.1.6.56.11.1.20
Control associated with the specified service access point.
OBJECT-TYPE    
  INTEGER clearStats(1)  

bscCuOperationalMode 1.3.6.1.4.1.495.2.1.6.56.11.1.30
Identifies the service access point as being active or non-active with the new configuration.
OBJECT-TYPE    
  BscOperationalMode  

bscCuConnectionStatus 1.3.6.1.4.1.495.2.1.6.56.11.1.31
Indicates the X25 connection status of this link.
OBJECT-TYPE    
  INTEGER nonExistantX25Connection(1), snalcConnectionRequested(2), snalcConnectionConfirmationSent(3), x25ConnectionEstablished(4)  

bscCuConnectRequest 1.3.6.1.4.1.495.2.1.6.56.11.1.45
Number of connection requests coming from the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscCuDisconnectRequest 1.3.6.1.4.1.495.2.1.6.56.11.1.46
Number of disconnection requests coming from the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscCuDisconnectIndication 1.3.6.1.4.1.495.2.1.6.56.11.1.47
Number of disconnections sent to the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscCuEndToEndConnectCnf 1.3.6.1.4.1.495.2.1.6.56.11.1.48
Number of end-to-end connections seen by the controller. Message sent by the Snalc.
OBJECT-TYPE    
  Counter  

bscCuSnalcRxRnr 1.3.6.1.4.1.495.2.1.6.56.11.1.49
Number of RNR 's received from the SNALC module due to X.25 or LLC2 flow control.
OBJECT-TYPE    
  Counter  

bscCuSnalcRxRr 1.3.6.1.4.1.495.2.1.6.56.11.1.50
Number of RR 's received from the SNALC module due to X.25 or LLC2 flow control.
OBJECT-TYPE    
  Counter  

bscDevTable 1.3.6.1.4.1.495.2.1.6.56.12
A table containing configuration information about all the devices controlled by this module.
OBJECT-TYPE    
  SEQUENCE OF  
    BscDevEntry

bscDevEntry 1.3.6.1.4.1.495.2.1.6.56.12.1
The parameters for a particular controller unit.
OBJECT-TYPE    
  BscDevEntry  

bscDevSapNumber 1.3.6.1.4.1.495.2.1.6.56.12.1.1
Identifies the sap to which this device is attached.
OBJECT-TYPE    
  SapIndex  

bscDevCuNumber 1.3.6.1.4.1.495.2.1.6.56.12.1.2
Identifies the address of the controller unit to which this device is attached.
OBJECT-TYPE    
  BscCuIndex  

bscDevNumber 1.3.6.1.4.1.495.2.1.6.56.12.1.3
Identifies the address of this device. The address has to be unique for a specified for a controller unit.
OBJECT-TYPE    
  BscDevIndex  

bscDevRowStatus 1.3.6.1.4.1.495.2.1.6.56.12.1.4
Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value to 'valid', or deleted by changing this object value to 'invalid'. Whether or not the row actually disappears is left to the implementation so this object may actually read as 'invalid' for some arbitrary length of time.
OBJECT-TYPE    
  BscRowStatus  

bscDevType 1.3.6.1.4.1.495.2.1.6.56.12.1.5
Indicates whether the device is a printer or a display.
OBJECT-TYPE    
  INTEGER display(1), printer(2)  

bscDevControl 1.3.6.1.4.1.495.2.1.6.56.12.1.20
Control associated with the specified service access point.
OBJECT-TYPE    
  INTEGER clearStats(1)  

bscDevOperationalMode 1.3.6.1.4.1.495.2.1.6.56.12.1.30
Identifies the device as being active or non-active with the new configuration.
OBJECT-TYPE    
  BscOperationalMode  

bscDevConnectionStatus 1.3.6.1.4.1.495.2.1.6.56.12.1.31
Indicates the current status of the device's logical connection with regard to the network.
OBJECT-TYPE    
  INTEGER nonExistantLogicalConnection(1), circuitRequestSent(2), circuitEnableReceived(3), circuitEnableSent(4), dataMode(5)  

bscDevState 1.3.6.1.4.1.495.2.1.6.56.12.1.32
Indicates the state of this link.
OBJECT-TYPE    
  INTEGER hiuWaitForNextPoll(1), hiuWaitingForStatusSenseAcknowledgment(2), hiuSendNextMessageOnAcknowledgment(3), hiuSendEotOnAcknowledgment(4), hiuReceiveCommandMode(5), hiuReadWaitForResponse(6), hiuWaitForCuReadEtx(7), hiuSendNextTransparent(8), hiuWaitingForRviResponse(9), hiuWaitingForWackResponse(10), hiuSendNextOnNak(11), hiuDeviceStateReserved-1(12), hiuDeviceStateReserved-2(13), hiuDeviceStateReserved-3(14), tiuWaitForNextPoll(15), tiuSentSpecificPoll(16), tiuSentSelectivePoll(17), tiuStatusSenseReceived(18), tiuSendNextMessageOnAcknowledgment(19), tiuSendEotOnTransparentAcknowledgment(20), tiuSendEotOnAcknowledgment(21), tiuDataPending(22), tiuReceivingCommand(23), tiuParityCursorCheckDetected(24), tiuReadWaitForResponse(25), tiuWaitingForSnalcData(26), tiuSendNextAfterNak(27), tiuTerminatePolling(28), tiuEndTestRequest(29)  

bscDevSSDeviceBusy 1.3.6.1.4.1.495.2.1.6.56.12.1.33
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSUnitSpecify 1.3.6.1.4.1.495.2.1.6.56.12.1.34
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSDeviceEnd 1.3.6.1.4.1.495.2.1.6.56.12.1.35
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSTransmissionCheck 1.3.6.1.4.1.495.2.1.6.56.12.1.36
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSCommandReject 1.3.6.1.4.1.495.2.1.6.56.12.1.37
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSInterventionRequired 1.3.6.1.4.1.495.2.1.6.56.12.1.38
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSEquipmentCheck 1.3.6.1.4.1.495.2.1.6.56.12.1.39
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSDataCheck 1.3.6.1.4.1.495.2.1.6.56.12.1.40
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSControlCheck 1.3.6.1.4.1.495.2.1.6.56.12.1.41
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevSSOperationCheck 1.3.6.1.4.1.495.2.1.6.56.12.1.42
The current bit information found in the last status sense message received/transmitted.
OBJECT-TYPE    
  BscStatusSense  

bscDevGeneralPoll 1.3.6.1.4.1.495.2.1.6.56.12.1.60
Number of general polls transmitted/received.
OBJECT-TYPE    
  Counter  

bscDevSpecificPoll 1.3.6.1.4.1.495.2.1.6.56.12.1.61
Number of specific polls transmitted/received.
OBJECT-TYPE    
  Counter  

bscDevDeviceSelection 1.3.6.1.4.1.495.2.1.6.56.12.1.62
Number of device selections transmitted/received.
OBJECT-TYPE    
  Counter  

bscDevTestRequest 1.3.6.1.4.1.495.2.1.6.56.12.1.63
Number of test request messages received.
OBJECT-TYPE    
  Counter  

bscDevHostWrite 1.3.6.1.4.1.495.2.1.6.56.12.1.64
Number of host initiated write commands.
OBJECT-TYPE    
  Counter  

bscDevHostRead 1.3.6.1.4.1.495.2.1.6.56.12.1.65
Number of host initiated read commands which need a direct response.
OBJECT-TYPE    
  Counter  

bscDevHostControl 1.3.6.1.4.1.495.2.1.6.56.12.1.66
Number of host initiated control commands.
OBJECT-TYPE    
  Counter  

bscDevCuShortRead 1.3.6.1.4.1.495.2.1.6.56.12.1.67
Number of controller initiated short read commands.
OBJECT-TYPE    
  Counter  

bscDevTxBlocks 1.3.6.1.4.1.495.2.1.6.56.12.1.68
Identifies the number of blocks transmited by this controller unit.
OBJECT-TYPE    
  Counter  

bscDevRxBlocks 1.3.6.1.4.1.495.2.1.6.56.12.1.69
Identifies the number of blocks received by this controller unit.
OBJECT-TYPE    
  Counter  

bscDevStatusSense 1.3.6.1.4.1.495.2.1.6.56.12.1.70
Identifies the number of status/sense messages received by the device.
OBJECT-TYPE    
  Counter  

bscDevError 1.3.6.1.4.1.495.2.1.6.56.12.1.71
Identifies the number of blocks in errors (other than BCC) received by this controller unit.
OBJECT-TYPE    
  Counter  

bscDevErrTimeout 1.3.6.1.4.1.495.2.1.6.56.12.1.72
Identifies the number of timeouts for this controller unit.
OBJECT-TYPE    
  Counter  

bscDevCircuitEnable 1.3.6.1.4.1.495.2.1.6.56.12.1.73
Number of device connection requests (or enable) coming from the DSP module through the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscDevCircuitDisconnect 1.3.6.1.4.1.495.2.1.6.56.12.1.74
Number of device disconnection requests (or disable) coming from the DSP module through the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscDevCircuitRequest 1.3.6.1.4.1.495.2.1.6.56.12.1.75
Number of circuit requests sent (TIU) or received (HIU) to/from the DSP module through the upper SNALC layer.
OBJECT-TYPE    
  Counter  

bscDevTxCommands 1.3.6.1.4.1.495.2.1.6.56.12.1.76
Number of complete commands transmitted to the host or controller/device.
OBJECT-TYPE    
  Counter  

bscDevRxCommands 1.3.6.1.4.1.495.2.1.6.56.12.1.77
Number of complete commands received from the host or controller/device.
OBJECT-TYPE    
  Counter  

bscDevCommandsQueued 1.3.6.1.4.1.495.2.1.6.56.12.1.78
Number of commands queued.
OBJECT-TYPE    
  Counter  

bscDevBlocksQueued 1.3.6.1.4.1.495.2.1.6.56.12.1.79
Number of blocks queued.
OBJECT-TYPE    
  Counter  

bscDevTxRvi 1.3.6.1.4.1.495.2.1.6.56.12.1.80
Number of transmitted RVI's to the host. (HIU).
OBJECT-TYPE    
  Counter  

bscDevRxRvi 1.3.6.1.4.1.495.2.1.6.56.12.1.81
Number of received RVI's from the controller/device.
OBJECT-TYPE    
  Counter  

bscDevTxTtd 1.3.6.1.4.1.495.2.1.6.56.12.1.82
Number of transmitted text delays, TTD, to the controller/device.(TIU)
OBJECT-TYPE    
  Counter  

bscDevRxTtd 1.3.6.1.4.1.495.2.1.6.56.12.1.83
Number of received text delay's, TTD, from the host.(HIU)
OBJECT-TYPE    
  Counter  

bscDevTxWack 1.3.6.1.4.1.495.2.1.6.56.12.1.84
Number of transmitted WACK's to the host.(HIU).
OBJECT-TYPE    
  Counter  

bscDevRxWack 1.3.6.1.4.1.495.2.1.6.56.12.1.85
Number of recieved WACK's from the controller/device.
OBJECT-TYPE    
  Counter