CXACTE-MIB

File: CXACTE-MIB.mib (5153 bytes)

Imported modules

RFC-1212 RFC1213-MIB CXProduct-SMI

Imported symbols

OBJECT-TYPE DisplayString cxACTE

Defined Types

ActeDebugEntry  
SEQUENCE    
  acteDebugLinkIndex INTEGER
  acteDebugIndex INTEGER
  acteDebugRegister DisplayString
  acteDebugResult DisplayString
  acteDebugWrite DisplayString
  acteDebugTvdStat INTEGER
  acteDebugDs1Stat INTEGER
  acteDebugSvdStat INTEGER
  acteDebugSvdEvt INTEGER

Defined Values

acteDebugTable 1.3.6.1.4.1.495.2.1.8.1.30
The DS1 debug table.
OBJECT-TYPE    
  SEQUENCE OF  
    ActeDebugEntry

acteDebugEntry 1.3.6.1.4.1.495.2.1.8.1.30.1
An entry in the DS1 Debug Table.
OBJECT-TYPE    
  ActeDebugEntry  

acteDebugLinkIndex 1.3.6.1.4.1.495.2.1.8.1.30.1.1
Identifies the T1/E1 (DS1) interface port.
OBJECT-TYPE    
  INTEGER 1..2  

acteDebugIndex 1.3.6.1.4.1.495.2.1.8.1.30.1.2
The index value uniquely identifies the T1/E1 (DS0) channel for which these table entries are applicable.
OBJECT-TYPE    
  INTEGER 1..31  

acteDebugRegister 1.3.6.1.4.1.495.2.1.8.1.30.1.10
Determines which register on the T1/E1 I/O card will be affected by the 'read' or 'write' operation initiated by the acteDebugOperation object.
OBJECT-TYPE    
  DisplayString Size(0..5)  

acteDebugResult 1.3.6.1.4.1.495.2.1.8.1.30.1.50
Indicates the values of each of the 8 registers following the address specified for the acteDebugRegister object following a 'get' command.
OBJECT-TYPE    
  DisplayString Size(0..25)  

acteDebugWrite 1.3.6.1.4.1.495.2.1.8.1.30.1.80
Determines the value to be written to the T1/E1 I/O card register specified by the acteDebugRegister object. The command is activated by entering a value in this object.
OBJECT-TYPE    
  DisplayString Size(0..2)  

acteDebugTvdStat 1.3.6.1.4.1.495.2.1.8.1.30.1.81
This object displays the statistics relative to this TVD control block for the specified DS0 channel on the specified DVC card which corresponds to acteDebugCfgIndex. If acteDebugTvdStat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
OBJECT-TYPE    
  INTEGER 1..3  

acteDebugDs1Stat 1.3.6.1.4.1.495.2.1.8.1.30.1.82
This object displays the statistics relative to this DS1 control block. When acteDebugIndex is set to 1, it displays the port information, 2 displays the counter information for channels 0 to 14 and 3 displays the counter information for channels 15 to 29. If acteDebugDs1Stat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
OBJECT-TYPE    
  INTEGER 1..3  

acteDebugSvdStat 1.3.6.1.4.1.495.2.1.8.1.30.1.83
This object displays the statistics relative to this SVD control block for the specified DS0 channel specified by acteDebugIndex. If acteDebugSvdStat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
OBJECT-TYPE    
  INTEGER 1..3  

acteDebugSvdEvt 1.3.6.1.4.1.495.2.1.8.1.30.1.84
This object displays the timestamps concerning particular events relative to this TVD control block for the specified DS0 channel specified by acteDebugIndex. If acteDebugSvdEvt is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
OBJECT-TYPE    
  INTEGER 1..3