CTRON-SFPS-L4SS-MIB

File: CTRON-SFPS-L4SS-MIB.mib (46833 bytes)

Imported modules

RFC-1212 RFC1213-MIB RFC1155-SMI
CTRON-SFPS-INCLUDE-MIB

Imported symbols

OBJECT-TYPE DisplayString PhysAddress
IpAddress Counter TimeTicks
switchSFPS

Defined Types

HexInteger  
INTEGER    

SfpsAddress  
OCTET STRING Size(6)    

SfpsL4CPFlowEntry  
SEQUENCE    
  sfpsL4CPFlowCnxIndex INTEGER
  sfpsL4CPFlowSecL3Address DisplayString
  sfpsL4CPFlowPrimL3Address DisplayString
  sfpsL4CPFlowSubprotocol HexInteger
  sfpsL4CPFlowSecMatchAnyDyn INTEGER
  sfpsL4CPFlowPrimMatchAnyDyn INTEGER
  sfpsL4CPFlowSecProtPort INTEGER
  sfpsL4CPFlowPrimProtPort INTEGER
  sfpsL4CPFlowSecSubstApplies INTEGER
  sfpsL4CPFlowPrimSubstApplies INTEGER
  sfpsL4CPFlowSecInPkts Counter
  sfpsL4CPFlowSecInOctets Counter
  sfpsL4CPFlowPrimInPkts Counter
  sfpsL4CPFlowPrimInOctets Counter
  sfpsL4CPFlowFlowAge TimeTicks
  sfpsL4CPFlowFlowLastUse TimeTicks
  sfpsL4CPFlowID INTEGER

SfpsL4CPMACAddrSubEntry  
SEQUENCE    
  sfpsL4CPMACAddrSubDestIP IpAddress
  sfpsL4CPMACAddrSubNextHopMAC PhysAddress
  sfpsL4CPMACAddrSubRefCount INTEGER

SfpsL4CPNetAddrUserEntry  
SEQUENCE    
  sfpsL4CPNetAddrUserProtocol INTEGER
  sfpsL4CPNetAddrUserNetAddr DisplayString
  sfpsL4CPNetAddrUserLoginID INTEGER
  sfpsL4CPNetAddrUserUserID INTEGER
  sfpsL4CPNetAddrUserUserName DisplayString

SfpsL4CPIPRouteEntry  
SEQUENCE    
  sfpsL4CPIPRouteSubnetMask IpAddress
  sfpsL4CPIPRouteSubnet IpAddress
  sfpsL4CPIPRouteRouteID INTEGER
  sfpsL4CPIPRouteRouteSubsystem INTEGER
  sfpsL4CPIPRouteDeviceID INTEGER
  sfpsL4CPIPRouteDeviceName DisplayString
  sfpsL4CPIPRouteMACAddress SfpsAddress
  sfpsL4CPIPRouteMetric INTEGER
  sfpsL4CPIPRouteCallable INTEGER

SfpsL4CPPortEntry  
SEQUENCE    
  sfpsL4CPPortNum INTEGER
  sfpsL4CPPortID INTEGER
  sfpsL4CPPortApplyPolicyIn INTEGER
  sfpsL4CPPortApplyPolicyOut INTEGER
  sfpsL4CPPortDefaultUserID INTEGER
  sfpsL4CPPortDefaultUserName DisplayString

SfpsL4CPCallableDeviceEntry  
SEQUENCE    
  sfpsL4CPCallableDeviceDeviceID INTEGER
  sfpsL4CPCallableDeviceDeviceName DisplayString
  sfpsL4CPCallableDeviceDefaultUserName DisplayString

SfpsL4CDRActiveFlowEntry  
SEQUENCE    
  sfpsL4CDRActiveFlowFlowID INTEGER
  sfpsL4CDRActiveFlowSubProtocol INTEGER
  sfpsL4CDRActiveFlowEtherType INTEGER
  sfpsL4CDRActiveFlowSourceUser DisplayString
  sfpsL4CDRActiveFlowSourceMACAddr DisplayString
  sfpsL4CDRActiveFlowSourceNetAddr DisplayString
  sfpsL4CDRActiveFlowSourceProtocolPort INTEGER
  sfpsL4CDRActiveFlowSourcePPRangeEnabled INTEGER
  sfpsL4CDRActiveFlowSourceConnNumber INTEGER
  sfpsL4CDRActiveFlowDestUser DisplayString
  sfpsL4CDRActiveFlowDestMACAddr DisplayString
  sfpsL4CDRActiveFlowDestNetAddr DisplayString
  sfpsL4CDRActiveFlowDestProtocolPort INTEGER
  sfpsL4CDRActiveFlowDestPPRangeEnabled INTEGER
  sfpsL4CDRActiveFlowDestConnNumber INTEGER
  sfpsL4CDRActiveFlowStartTime TimeTicks
  sfpsL4CDRActiveFlowLastPktTime TimeTicks
  sfpsL4CDRActiveFlowEndTime TimeTicks
  sfpsL4CDRActiveFlowInOctets Counter
  sfpsL4CDRActiveFlowOutOctets Counter
  sfpsL4CDRActiveFlowInPkts Counter
  sfpsL4CDRActiveFlowOutPkts Counter
  sfpsL4CDRActiveFlowDemandAccessConnMade INTEGER
  sfpsL4CDRActiveFlowFlowRecordState INTEGER

SfpsL4CDRTermedFlowEntry  
SEQUENCE    
  sfpsL4CDRTermedFlowFlowID INTEGER
  sfpsL4CDRTermedFlowSubProtocol INTEGER
  sfpsL4CDRTermedFlowEtherType INTEGER
  sfpsL4CDRTermedFlowSourceUser DisplayString
  sfpsL4CDRTermedFlowSourceMACAddr DisplayString
  sfpsL4CDRTermedFlowSourceNetAddr DisplayString
  sfpsL4CDRTermedFlowSourceProtocolPort INTEGER
  sfpsL4CDRTermedFlowSourcePPRangeEnabled INTEGER
  sfpsL4CDRTermedFlowSourceConnNumber INTEGER
  sfpsL4CDRTermedFlowDestUser DisplayString
  sfpsL4CDRTermedFlowDestMACAddr DisplayString
  sfpsL4CDRTermedFlowDestNetAddr DisplayString
  sfpsL4CDRTermedFlowDestProtocolPort INTEGER
  sfpsL4CDRTermedFlowDestPPRangeEnabled INTEGER
  sfpsL4CDRTermedFlowDestConnNumber INTEGER
  sfpsL4CDRTermedFlowStartTime TimeTicks
  sfpsL4CDRTermedFlowLastPktTime TimeTicks
  sfpsL4CDRTermedFlowEndTime TimeTicks
  sfpsL4CDRTermedFlowInOctets Counter
  sfpsL4CDRTermedFlowOutOctets Counter
  sfpsL4CDRTermedFlowInPkts Counter
  sfpsL4CDRTermedFlowOutPkts Counter
  sfpsL4CDRTermedFlowDemandAccessConnMade INTEGER
  sfpsL4CDRTermedFlowFlowRecordState INTEGER

SfpsL4CDRFlowIndexEntry  
SEQUENCE    
  sfpsL4CDRFlowIndexFlowID INTEGER
  sfpsL4CDRFlowIndexSFPSFlowTblIndex INTEGER
  sfpsL4CDRFlowIndexSFlowStatsPtr INTEGER
  sfpsL4CDRFlowIndexStaticFlowInfoPtr INTEGER
  sfpsL4CDRFlowIndexFlowTblEntryPtr INTEGER
  sfpsL4CDRFlowIndexFlowState INTEGER

Defined Values

sfpsL4SS 1.3.6.1.4.1.52.4.2.4.2.6
OBJECT IDENTIFIER    

sfpsL4CP 1.3.6.1.4.1.52.4.2.4.2.6.1
OBJECT IDENTIFIER    

sfpsL4CDR 1.3.6.1.4.1.52.4.2.4.2.6.2
OBJECT IDENTIFIER    

l4cpStats 1.3.6.1.4.1.52.4.2.4.2.6.1.1
OBJECT IDENTIFIER    

l4cpConfig 1.3.6.1.4.1.52.4.2.4.2.6.1.2
OBJECT IDENTIFIER    

l4cpActions 1.3.6.1.4.1.52.4.2.4.2.6.1.3
OBJECT IDENTIFIER    

l4cdrStats 1.3.6.1.4.1.52.4.2.4.2.6.2.1
OBJECT IDENTIFIER    

l4cdrConfig 1.3.6.1.4.1.52.4.2.4.2.6.2.2
OBJECT IDENTIFIER    

l4cdrActions 1.3.6.1.4.1.52.4.2.4.2.6.2.3
OBJECT IDENTIFIER    

sfpsL4CPDisableTCPAckCheck 1.3.6.1.4.1.52.4.2.4.2.6.1.2.1
This variable indicates whether or not TCP segments whose ACK bit is off are allowed to use an existing flow table entry. When set to 2, a TCP segment whose ACK bit is off is always treated as an exception packet. This variable takes effect immediately, and its value is peristent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPFlowTable 1.3.6.1.4.1.52.4.2.4.2.6.1.4
This table describes each conversation between a pair or Layer 3 or Layer 4 endpoints.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPFlowEntry

sfpsL4CPFlowEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1
Each entry contains statistics and information for a pair of Layer 3 or Layer 4 endpoints.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPFlowEntry  

sfpsL4CPFlowCnxIndex 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.1
Index (1-based) of the SFPSGAPI connection table entry to which this flow belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CPFlowSecL3Address 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.2
The Layer 3 address of the secondary endpoint for this flow. The secondary endpoint is the one having the higher MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPFlowPrimL3Address 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.3
The Layer 3 address of the primary endpoint for this flow. The primary endpoint is the one having the lower MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPFlowSubprotocol 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.4
This value identifies the Layer 4 protocol. It corresponds to the IP 'Protocol' field as described in the 'Assigned Numbers' RFC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexInteger 0..7FFFFFFF  

sfpsL4CPFlowSecMatchAnyDyn 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.5
If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPFlowPrimMatchAnyDyn 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.6
If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the primary endpoint should be treated as a wildcard, able to match any port number above 1023.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPFlowSecProtPort 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.7
If this is a TCP or UDP entry, this value indicates the protocol port number of the secondary endpoint. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..FFFF  

sfpsL4CPFlowPrimProtPort 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.8
If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..FFFF  

sfpsL4CPFlowSecSubstApplies 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.9
Indication of whether or not MAC address substitution applies to the secondary endpoint for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPFlowPrimSubstApplies 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.10
Indication of whether or not MAC address substitution applies to the primary endpoint for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPFlowSecInPkts 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.11
Count of packets transmitted from primary to secondary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CPFlowSecInOctets 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.12
Count of octets transmitted from primary to secondary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CPFlowPrimInPkts 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.13
Count of packets transmitted from secondary to primary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CPFlowPrimInOctets 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.14
Count of octets transmitted from secondary to primary.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CPFlowFlowAge 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.15
Time elapsed since this entry was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CPFlowFlowLastUse 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.16
Time elapsed since this entry was last used to send data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CPFlowID 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.17
The Call Detail Recording flow ID for this flow, or zero if CDR is not active for the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPMACAddrSubTable 1.3.6.1.4.1.52.4.2.4.2.6.1.5
This table provides the ability to override the default gateway for specific routes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPMACAddrSubEntry

sfpsL4CPMACAddrSubEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1
Each entry contains the MAC address substitution information associated with a specific destination IP address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPMACAddrSubEntry  

sfpsL4CPMACAddrSubDestIP 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.1
Destination IP address for this route
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sfpsL4CPMACAddrSubNextHopMAC 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.2
The next-hop MAC address to use for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

sfpsL4CPMACAddrSubRefCount 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.3
The number of flow table entries that reference this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CPNetAddrUserTable 1.3.6.1.4.1.52.4.2.4.2.6.1.7
This table associates user information with network addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPNetAddrUserEntry

sfpsL4CPNetAddrUserEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1
Each entry contains the user information associated with a specific network address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPNetAddrUserEntry  

sfpsL4CPNetAddrUserProtocol 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.1
The network-layer protocol associated with this entry. Values correspond to the 'aoAddressTag' enumeration (see aoproperties.h).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CPNetAddrUserNetAddr 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.2
The network-layer address associated with this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPNetAddrUserLoginID 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.3
The login ID from CSM's LoginOID. Set to zero if no user is logged into the address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPNetAddrUserUserID 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.4
The object ID from CSM's UserOID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPNetAddrUserUserName 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.5
The user name associated with this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPIPRouteTable 1.3.6.1.4.1.52.4.2.4.2.6.1.8
This table associates IP routes (subnets) with devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPIPRouteEntry

sfpsL4CPIPRouteEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1
Each entry contains the IP route information associated with a specific device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPIPRouteEntry  

sfpsL4CPIPRouteSubnetMask 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.1
The subnet mask associated with this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sfpsL4CPIPRouteSubnet 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.2
The destination subnet of this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sfpsL4CPIPRouteRouteID 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.3
The object ID from CSM's RouteOID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPIPRouteRouteSubsystem 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.4
Indicates type of device route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

sfpsL4CPIPRouteDeviceID 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.5
The object ID from CSM's DeviceOID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPIPRouteDeviceName 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.6
The device name for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPIPRouteMACAddress 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.7
The MAC address of the device for this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SfpsAddress  

sfpsL4CPIPRouteMetric 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.8
The metric associated with this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPIPRouteCallable 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.9
Indicates whether or not the device associated with this route is callable for IP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPPortTable 1.3.6.1.4.1.52.4.2.4.2.6.1.9
This table lists the attributes of an access servers ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPPortEntry

sfpsL4CPPortEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1
Each entry contains information about one of this access server's ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPPortEntry  

sfpsL4CPPortNum 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.1
The logical port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CPPortID 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.2
The last four octets of CSM's PortOID for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPPortApplyPolicyIn 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.3
Indicates whether or not access policies are to be applied to packets arriving at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPPortApplyPolicyOut 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.4
Indicates whether or not access policies are to be applied to packets sent out this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CPPortDefaultUserID 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.5
The last four octets of CSM's UserOID for the default userid for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CPPortDefaultUserName 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.6
The user name assigned to MAC addresses discovered on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPCallableDeviceTable 1.3.6.1.4.1.52.4.2.4.2.6.1.11
This table lists the attributes of a callable device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CPCallableDeviceEntry

sfpsL4CPCallableDeviceEntry 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1
Each entry contains information about one of this access server's ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CPCallableDeviceEntry  

sfpsL4CPCallableDeviceDeviceID 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.1
The last four octets of CSM's DeviceOID for this callable device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CPCallableDeviceDeviceName 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.2
The default device name for this callable device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CPCallableDeviceDefaultUserName 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.3
The default user name for this callable device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowTable 1.3.6.1.4.1.52.4.2.4.2.6.2.4
This table lists the currently active flows that have Call Detail Recording enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CDRActiveFlowEntry

sfpsL4CDRActiveFlowEntry 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1
Each entry contains information about one flow that has CDR enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CDRActiveFlowEntry  

sfpsL4CDRActiveFlowFlowID 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.1
Flow ID for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CDRActiveFlowSubProtocol 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.2
If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowEtherType 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.3
The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowSourceUser 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.4
The user name associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowSourceMACAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.5
The MAC address associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowSourceNetAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.6
The Layer 3 address associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowSourceProtocolPort 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.7
If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowSourcePPRangeEnabled 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.8
Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRActiveFlowSourceConnNumber 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.9
The source connection number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowDestUser 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.10
The user name associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowDestMACAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.11
The MAC address associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowDestNetAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.12
The Layer 3 address associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRActiveFlowDestProtocolPort 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.13
If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowDestPPRangeEnabled 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.14
Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRActiveFlowDestConnNumber 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.15
The destination connection number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRActiveFlowStartTime 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.16
The time elapsed since this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRActiveFlowLastPktTime 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.17
The time elapsed since the most recent packet was sent on this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRActiveFlowEndTime 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.18
The time elapsed since this flow was terminated. This field is not meaningful for active flows.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRActiveFlowInOctets 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.19
The number of octets that have been sent from the destination to the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRActiveFlowOutOctets 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.20
The number of octets that have been sent from the source to the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRActiveFlowInPkts 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.21
The number of packets that have been sent from the destination to the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRActiveFlowOutPkts 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.22
The number of packets that have been sent from the source to the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRActiveFlowDemandAccessConnMade 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.23
Indicates whether or not a demand access connection had to be made for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRActiveFlowFlowRecordState 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.24
Indicates the current state of the flow record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), active(2), terminated(3), invalid(4)  

sfpsL4CDRTermedFlowTable 1.3.6.1.4.1.52.4.2.4.2.6.2.5
This table lists the terminated flows that had Call Detail Recording enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CDRTermedFlowEntry

sfpsL4CDRTermedFlowEntry 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1
Each entry contains information about one flow that had CDR enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CDRTermedFlowEntry  

sfpsL4CDRTermedFlowFlowID 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.1
Flow ID for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CDRTermedFlowSubProtocol 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.2
If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowEtherType 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.3
The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowSourceUser 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.4
The user name associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowSourceMACAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.5
The MAC address associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowSourceNetAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.6
The Layer 3 address associated with the source of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowSourceProtocolPort 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.7
If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowSourcePPRangeEnabled 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.8
Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRTermedFlowSourceConnNumber 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.9
The source connection number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowDestUser 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.10
The user name associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowDestMACAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.11
The MAC address associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowDestNetAddr 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.12
The Layer 3 address associated with the destination of the flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sfpsL4CDRTermedFlowDestProtocolPort 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.13
If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowDestPPRangeEnabled 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.14
Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRTermedFlowDestConnNumber 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.15
The destination connection number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRTermedFlowStartTime 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.16
The time elapsed since this flow was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRTermedFlowLastPktTime 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.17
The time elapsed since the most recent packet was sent on this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRTermedFlowEndTime 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.18
The time elapsed since this flow was terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sfpsL4CDRTermedFlowInOctets 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.19
The number of octets that have been sent from the destination to the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRTermedFlowOutOctets 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.20
The number of octets that have been sent from the source to the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRTermedFlowInPkts 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.21
The number of packets that have been sent from the destination to the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRTermedFlowOutPkts 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.22
The number of packets that have been sent from the source to the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sfpsL4CDRTermedFlowDemandAccessConnMade 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.23
Indicates whether or not a demand access connection had to be made for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

sfpsL4CDRTermedFlowFlowRecordState 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.24
Indicates the current state of the flow record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), active(2), terminated(3), invalid(4)  

sfpsL4CDRFlowIndexTable 1.3.6.1.4.1.52.4.2.4.2.6.2.6
This table lists the current flows that have Call Detail Recording enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpsL4CDRFlowIndexEntry

sfpsL4CDRFlowIndexEntry 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1
Each entry contains information about one flow that has CDR enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SfpsL4CDRFlowIndexEntry  

sfpsL4CDRFlowIndexFlowID 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.1
Flow ID for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7FFFFFFF  

sfpsL4CDRFlowIndexSFPSFlowTblIndex 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.2
Index of the SFPS Flow Table entry (1-based) that corresponds to this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRFlowIndexSFlowStatsPtr 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.3
Pointer to the SFlowStats object for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRFlowIndexStaticFlowInfoPtr 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.4
Pointer to the L4CDRStaticFlowInfo object for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRFlowIndexFlowTblEntryPtr 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.5
The flow table entry pointer for this flow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpsL4CDRFlowIndexFlowState 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.6
Indicates the current state of the flow index record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initialized(1), active(2), terminated(3), invalid(4)