CTRON-LINE-STATISTICS-MIB

File: CTRON-LINE-STATISTICS-MIB.mib (8589 bytes)

Imported modules

RFC-1212 CTRON-OIDS

Imported symbols

OBJECT-TYPE cabletron

Defined Types

CtDsx1LineStatisticsEntry  
SEQUENCE    
  lsLineIndex INTEGER
  lsLayer1Up INTEGER
  lsLayer1Down INTEGER
  lsLayer1LOS INTEGER
  lsLayer1LOF INTEGER
  lsLayer1RAI INTEGER
  lsLayer1AIS INTEGER
  lsLayer1LOSAll INTEGER
  lsLayer1LOFAll INTEGER
  lsLayer1RAIAll INTEGER
  lsLayer1AISAll INTEGER
  lsLayer1Interrupts INTEGER
  lsLayer1ClearStats INTEGER

Defined Values

ctSSA 1.3.6.1.4.1.52.4497
OBJECT IDENTIFIER    

ctDsx1LineStatisticsTable 1.3.6.1.4.1.52.4497.21
A list of statistics gathered at Layer 1 for the installed WAN ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtDsx1LineStatisticsEntry

ctDsx1LineStatisticsEntry 1.3.6.1.4.1.52.4497.21.1
A list of statistics gathered at Layer 1 for a given WAN port. The statistics include counts for qualified alarms and total alarms (qualified alarms and unqualified alarms). A qualified alarm is an alarm whose presence has been detected for a finite amount of time (called its integration period). An unqualified alarm is an alarm whose presence has not been detected for the entire integration period.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CtDsx1LineStatisticsEntry  

lsLineIndex 1.3.6.1.4.1.52.4497.21.1.1
The physical line index for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1Up 1.3.6.1.4.1.52.4497.21.1.2
The number of times Layer 1 has been brought up (by a higher level software entity or administrator) or has come up due to the disintegration of an alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1Down 1.3.6.1.4.1.52.4497.21.1.3
The number of times Layer 1 has been taken down (by a higher level software entity or administrator) or has gone down due to the integration of an alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1LOS 1.3.6.1.4.1.52.4497.21.1.4
The number of times Layer 1 has qualified a Loss of Signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1LOF 1.3.6.1.4.1.52.4497.21.1.5
The number of times Layer 1 has qualified a Loss of Frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1RAI 1.3.6.1.4.1.52.4497.21.1.6
The number of times Layer 1 has qualified a Remote Alarm Indication. RAI is also known as a Yellow alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1AIS 1.3.6.1.4.1.52.4497.21.1.7
The number of times Layer 1 has qualified an Alarm Indication Signal. AIS is also known as a Blue alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1LOSAll 1.3.6.1.4.1.52.4497.21.1.8
The number of times Layer 1 has detected a Loss of Signal. This includes both qualified and unqualified Losses of Signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1LOFAll 1.3.6.1.4.1.52.4497.21.1.9
The number of times Layer 1 has detected a Loss of Frame. This includes both qualified and unqualified Losses of Frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1RAIAll 1.3.6.1.4.1.52.4497.21.1.10
The number of times Layer 1 has detected a Remote Alarm Indication. This includes both qualified and unqualified Remote Alarm Indications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1AISAll 1.3.6.1.4.1.52.4497.21.1.11
The number of times Layer 1 has detected an Alarm Indication Signal. This includes both qualified and unqualified Alarm Indication Signals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1Interrupts 1.3.6.1.4.1.52.4497.21.1.12
The number of interrupts seen at Layer 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsLayer1ClearStats 1.3.6.1.4.1.52.4497.21.1.13
When written with any value, all statistics associated with this LineIndex will be cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER