CTRON-DHCP-MIB

File: CTRON-DHCP-MIB.mib (24189 bytes)

Imported modules

RFC-1212 RFC1213-MIB ROUTER-OIDS
CTRON-IP-ROUTER-MIB RFC1155-SMI

Imported symbols

OBJECT-TYPE DisplayString PhysAddress
nwRtrProtoSuites nwIpRouter nwIpMibs
nwIpComponents nwIpClientServices IpAddress
Counter

Defined Types

CtDhcpServerIfEntry  
SEQUENCE    
  ctDhcpIfIndex INTEGER
  ctDhcpIfAdminStatus INTEGER
  ctDhcpIfOperStatus INTEGER
  ctDhcpIfServerAddress IpAddress
  ctDhcpIfNetworkAddress IpAddress
  ctDhcpIfSubnetMask IpAddress
  ctDhcpIfLowestaddress IpAddress
  ctDhcpIfHighestAddress IpAddress
  ctDhcpIfAddressesUsed INTEGER
  ctDhcpIfAddressesFree INTEGER
  ctDhcpIfLeasePeriod INTEGER
  ctDhcpIfDefaultGateway IpAddress
  ctDhcpIfDomainNameServer IpAddress
  ctDhcpIfDomainName OCTET STRING
  ctDhcpIfWINServer IpAddress

CtDhcpClientStatsEntry  
SEQUENCE    
  ctDhcpClientStatsID INTEGER
  ctDhcpClientName OCTET STRING
  ctDhcpClientIP IpAddress
  ctDhcpClientID OCTET STRING
  ctDhcpEndOfLease INTEGER

Defined Values

ctDhcp 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2
OBJECT IDENTIFIER    

ctDhcpServerStats 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1
OBJECT IDENTIFIER    

ctDhcpInterfaceConfig 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2
OBJECT IDENTIFIER    

ctDhcpClientStatusTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3
OBJECT IDENTIFIER    

ctDhcpAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.1
This object is used to enable or disable the DHCP server function for the entire device. This object must be set to enabled for the server to function on this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ctDhcpOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.2
Indicates the current operating status of the DHCP server function on this device. The value of ctDhcpIfOperStatus for at least one interface must be set to enabled for this object to be enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ctDhcpDiscovers 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.3
This value is the number of discover messages received by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpOffers 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.4
This value is the number of offer messages sent by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpRequests 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.5
This value is the number of request messages received by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpDeclines 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.6
This value is the number of decline messages received by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpReleases 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.7
This value is the number of release messages received by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpAcks 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.8
This value is the number of ack messages sent by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpNaks 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.9
This value is the number of nak messages sent by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpOtherServers 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.10
This value is the number of messages received by the DHCP server since the last reset which were directed to other servers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpProtocolErrors 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.11
This value is the number of protocol errors detected by the DHCP server since the last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ctDhcpServerTime 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.12
This value is the number of seconds that this DHCP server has been in operation since its non-volatile memory was last cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpNoOfActiveClients 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.13
This value is the number of clients who currently have network addresses assigned by this DHCP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpReclaimIP 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.1.14
This object is a method of reclaiming abandoned IP addresses. The value reads as 0.0.0.0. Writing to it with an IP address of a client on the active list will remove the entry from the list. It is used to recover addresses with long leases from clients who have left the network without sending a release notice.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpServerIfTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1
This table contains an entry for each port of a DHCP server which is eligible to perform DHCP functions. The table is indexed by ctDhcpIfIndex, which indicates the value of the MIB 2 ifindex which identifies the device's interface for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtDhcpServerIfEntry

ctDhcpServerIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1
A description of the configuration parameters for a single interface on the DHCP server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CtDhcpServerIfEntry  

ctDhcpIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.1
A unique value identifying an element in a sequence of entries which belong to the DHCP server interface list. This value ranges from 1 to 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpIfAdminStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.2
Used to enable and disable the DHCP functions on this interface only. This object must be set to enabled for the DHCP functions to occur on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ctDhcpIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.3
Indicates the current operating status of the DHCP server function on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), invalid-config(3)  

ctDhcpIfServerAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.4
This is the IP address of the interface which is providing access to the DHCP server for clients which are connected to this network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ctDhcpIfNetworkAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.5
This is the IP subnet which is being served by this interface of the DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfSubnetMask 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.6
This is the subnet mask of the IP subnet which is being served by this interface of the DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfLowestaddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.7
This is the lowest numerical value of the IP address range that will be assigned to clients by this interface of the DHCP server. Its value must be greater or equal to ctDhcpIfNetworkAddress and less than or equal to ctDhcpIfHighestAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfHighestAddress 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.8
This is the highest numerical value of the IP address range that will be assigned to clients by this interface of the DHCP server. Its value must be greater or equal to ctDhcpIfLowestaddress but remain within ctDhcpIfNetworkAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfAddressesUsed 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.9
This value is the number of clients which are currently using IP addresses assigned by this interface of the DHCP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpIfAddressesFree 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.10
This value is the number of IP addresses that are currently available for distribution by this interface of the DHCP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpIfLeasePeriod 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.11
This value is the time period for which an IP address assigned by this interface is valid. The units are seconds. A value of 0 signifys that the lease will never expire.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ctDhcpIfDefaultGateway 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.12
This value is an DHCP option that can be passed to a client by this interface if it is requested as part of the DHCP process. This value is the IP address of the default gateway to be used by the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfDomainNameServer 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.13
This value is an DHCP option that can be passed to a client by this interface if it is requested as part of the DHCP process. This value is the IP address of the domain name server to be used by the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpIfDomainName 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.14
This value is an DHCP option that can be passed to a client by this interface if it is requested as part of the DHCP process. This value is the domain name to be used by the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

ctDhcpIfWINServer 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.15
This value is an DHCP option that can be passed to a client by this interface if it is requested as part of the DHCP process. This value is the IP address of the NetBIOS overTCP/IP name server to be used by the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ctDhcpClientStatsTable 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1
This table contains an entry for each DHCP client. The table is indexed by ctDhcpClientStatsID, which indicates an arbitrary order of entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtDhcpClientStatsEntry

ctDhcpClientStatsEntry 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1
A description of a single client, which could be on any of the subnets being served by participating interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CtDhcpClientStatsEntry  

ctDhcpClientStatsID 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1.1
A unique value identifying an element in a sequence of active clients which have been given network addresses by this DHCP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ctDhcpClientName 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1.2
This is the name of the client as listed by the client in a DHCP request packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ctDhcpClientIP 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1.3
This is the assigned IP address of the client during this active connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ctDhcpClientID 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1.4
This is the ID of the client as listed by the client in a DHCP request packet. It is normally the client's Ethernet MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ctDhcpEndOfLease 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.3.1.1.5
This value is the time at which the lease of the IP address will expire. The units are seconds and the value is relative to the same starting point as ctDhcpIfServerTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER