CTRON-AP3000-MIB

File: CTRON-AP3000-MIB.mib (159056 bytes)

Imported modules

RFC1213-MIB

RFC1155-SMI

SNMPv2-SMI

Imported symbols

ifIndex	mgmt	Counter
IpAddress	enterprises	MODULE-IDENTITY
NOTIFICATION-TYPE	OBJECT-TYPE	Integer32
Counter32	TimeTicks

Defined Types

MacAddress
OCTET STRING	Size(6)

DisplayString
OCTET STRING

TruthValue
INTEGER	false(2), true(1)

EnterpriseApFilterProtocolEntry
SEQUENCE
	enterpriseApFilterProtocolIndex	Integer32
	enterpriseApFilterProtocolName	DisplayString
	enterpriseApFilterProtocolISODesignator	DisplayString
	enterpriseApFilterProtocolState	INTEGER

ApvFilterControlEntry
SEQUENCE
	apvFilterControlIndex	Integer32
	apvIBSSFilterControl	INTEGER
	apvAPManageFilterControl	INTEGER

MacFilterEntry
SEQUENCE
	macFilterIndex	Integer32
	macFilterAddress	MacAddress
	macFilterAllowedToGo	INTEGER
	macFilterOpeStatus	INTEGER

ApvMacFilterOperateEntry
SEQUENCE
	apvMacFilterPermission	INTEGER
	apvMacFilterAddressToAdd	OCTET STRING

ApvMacFilterEntry
SEQUENCE
	apvMacFilterIndex	Integer32
	apvMacFilterAddress	MacAddress
	apvMacFilterActivity	INTEGER

QosMACTypeEntry
SEQUENCE
	qosMACTypeIndex	Integer32
	qosMACTypeAddress	MacAddress
	qosMACTypePriority	Integer32
	qosMACTypeOpeStatus	INTEGER

QosEtherTypeEntry
SEQUENCE
	qosEtherTypeIndex	Integer32
	qosEtherTypeHexValue	OCTET STRING
	qosEtherTypePriority	Integer32
	qosEtherTypeOpeStatus	INTEGER

LinkQualityEntry
SEQUENCE
	linkQualityRadioIndex	Integer32
	linkQualityStaIndex	Integer32
	linkQualityStaMacAddress	MacAddress
	linkQualityStaRssi	Integer32

ApSnmpTrapDestinationEntry
SEQUENCE
	apSnmpTrapDestinationIndex	INTEGER
	apSnmpTrapDestinationCommunity	DisplayString
	apSnmpTrapDestinationIP	IpAddress
	apSnmpTrapDestinationState	INTEGER

ApRadioSecurityEntry
SEQUENCE
	apRadioSecurityIndex	Integer32
	apRadioSecurityWEPAuthType	INTEGER
	apRadioSecuritySharedKeyLen	INTEGER
	apRadioSecurityWPAMode	INTEGER
	apRadioSecurityWPAKeyType	INTEGER
	apRadioSecurityWPACipher	INTEGER
	apRadioSecurityWPAPSKType	INTEGER
	apRadioSecurityWPAPSK	DisplayString
	apRadioSecurityWEPKeyType	INTEGER
	apRadioSecurityWEPEnabled	TruthValue
	apRadioSecurityWPACipherSuite	INTEGER
	apRadioApSecurityWPAPreAuthentication	INTEGER
	apRadioApSecurityWPAPmksaLifetime	INTEGER

EnterpriseApRadioEntry
SEQUENCE
	enterpriseApRadioIndex	Integer32
	enterpriseApRadioAutoChannel	INTEGER
	enterpriseApRadioTransmitPower	INTEGER
	enterpriseApRadioTurboMode	INTEGER
	enterpriseApRadioDataRate	INTEGER
	enterpriseApRadioGMode	INTEGER
	enterpriseApRadioAntennaMode	INTEGER
	rogueApState	INTEGER
	rogueApInterval	INTEGER
	rogueApDuration	INTEGER
	rogueApScanNow	INTEGER
	enterpriseApRadioAntennaModeControl	INTEGER
	enterpriseApRadioFixedAntennaType	INTEGER
	enterpriseApRadioAntennaID	INTEGER
	enterpriseApRadioMulticastDataRate	INTEGER
	enterpriseApRadioAutoDataRate	INTEGER
	enterpriseApRadioPreamble	INTEGER
	enterpriseApRadioSWRetryMode	INTEGER

EnterpriseApVapRadioEntry
SEQUENCE
	enterpriseApVapRadioIndex	Integer32
	enterpriseApVapRadioState	INTEGER
	enterpriseApVapRadioSecureAccess	INTEGER
	enterpriseApVapRadioMaxAssoc	INTEGER
	enterpriseApVapRadioTransmitKey	INTEGER
	enterpriseApVapRadioDescription	DisplayString
	enterpriseApVapRadioDefefaultPriority	Integer32

EnterpriseApRadioWdsEntry
SEQUENCE
	wdsApRole	INTEGER
	wdsApAckTimeout	INTEGER

EnterpriseApRadioWdsPeerEntry
SEQUENCE
	wdsPeerIndex	Integer32
	wdsPeerBssid	DisplayString
	wdsPeerRSSI	Integer32

EnterpriseApRadioWEPKeysEntry
SEQUENCE
	enterpriseApRadioWEPKeysIndex	INTEGER
	enterpriseApRadioWEPKeyType	INTEGER
	enterpriseApRadioWEPKeyLength	INTEGER

EnterpriseApRadioAvAntennaListEntry
SEQUENCE
	enterpriseApRadioAvAntennaIndex	INTEGER
	enterpriseApRadioAvAntennaId	INTEGER
	enterpriseApRadioAvAntennaDesc	DisplayString

EnterpriseApRadioAvChannelListEntry
SEQUENCE
	enterpriseApRadioAvChannelIndex	INTEGER
	enterpriseApRadioAvChannelNo	INTEGER

ApNativeVlanEntry
SEQUENCE
	apNativeVlanIfIndex	Integer32
	apNativeVlanSsidNumber	Integer32
	apNativeVlanVlanId	Integer32
	apNativeVlanState	INTEGER

ApAuthenticationServerEntry
SEQUENCE
	apAuthenticationServerIndex	Integer32
	apAuthenticationServer	DisplayString
	apAuthenticationPort	INTEGER
	apAuthenticationKey	DisplayString
	apAuthenticationRetransmit	INTEGER
	apAuthenticationTimeout	INTEGER
	apAuthenticationAcctPort	INTEGER
	apAuthenticationAcctInterimUpdate	INTEGER
	apAuthenticationAcctState	INTEGER

ApAuthenticationSupplicantEntry
SEQUENCE
	ap8021xSuppIndex	Integer32
	ap8021xSuppState	INTEGER
	ap8021xSuppUser	DisplayString
	ap8021xSuppPasswd	DisplayString

ApvAuthenticationSetupEntry
SEQUENCE
	apv8021xIndex	Integer32
	apv8021xState	INTEGER
	apv8021xBroadcastKeyRefreshRate	INTEGER
	apv8021xSessionKeyRefreshRate	INTEGER
	apv8021xReauthenticationTimeout	INTEGER
	apvMACAuthenticationMode	INTEGER
	apvMACAuthenticationTimeout	INTEGER
	apvMACAuthenticationPasswd	DisplayString

ApWStationSessionEntry
SEQUENCE
	apWStationSessionIfIndex	Integer32
	apWStationSessionStationAddres	MacAddress
	apWStationSessionAuthenticated	TruthValue
	apWStationSessionAssociated	TruthValue
	apWStationSessionIsForwarding	TruthValue
	apWStationSessionKeyType	INTEGER
	apWStationSessionAssociationId	Integer32
	apWStationSessionLastAuthenticatedTime	TimeTicks
	apWStationSessionAssociatedTime	TimeTicks
	apWStationSessionLastAssociatedTime	TimeTicks
	apWStationSessionLastDisassociatedTime	TimeTicks
	apWStationSessionTxPacketCount	Counter32
	apWStationSessionRxPacketCount	Counter32
	apWStationSessionTxByteCount	Counter32
	apWStationSessionRxByteCount	Counter32
	apWStationSessionVlanID	INTEGER

RogueApDetectionEntry
SEQUENCE
	rogueApIndex	INTEGER
	rogueApBssid	DisplayString
	rogueApSsid	DisplayString
	rogueApPortNumber	Integer32
	rogueApChannelNumber	Integer32
	rogueApRSSIValue	Integer32

ApSyslogServerEntry
SEQUENCE
	apSyslogServerIndex	Integer32
	apSyslogServerState	INTEGER
	apSyslogServerIPAddress	DisplayString
	apSyslogServerPort	INTEGER

ApEventLogEntry
SEQUENCE
	apEventLogIndex	INTEGER
	apEventLogMessage	DisplayString

ApWMMControlEntry
SEQUENCE
	apWMMState	INTEGER

ApWMMBssParamEntry
SEQUENCE
	apWMMBssParamIndex	INTEGER
	apWMMBssParamCWmin	INTEGER
	apWMMBssParamCWmax	INTEGER
	apWMMBssParamAIFSN	INTEGER
	apWMMBssParamTXOPLimit	INTEGER
	apWMMBssParamAdmissionControl	TruthValue

ApWMMApParamEntry
SEQUENCE
	apWMMApParamIndex	INTEGER
	apWMMApParamCWmin	INTEGER
	apWMMApParamCWmax	INTEGER
	apWMMApParamAIFSN	INTEGER
	apWMMApParamTXOPLimit	INTEGER
	apWMMApParamAdmissionControl	TruthValue

Defined Values

cabletron		1.3.6.1.4.1.52
OBJECT IDENTIFIER

mibs		1.3.6.1.4.1.52.4
OBJECT IDENTIFIER

ctronAP3000		1.3.6.1.4.1.52.4.13
This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the Enterasys AP3000 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects in AP3000.
MODULE-IDENTITY

comPortMgnt		1.3.6.1.4.1.52.4.13.1
OBJECT IDENTIFIER

macFilterMgnt		1.3.6.1.4.1.52.4.13.2
OBJECT IDENTIFIER

qosMgnt		1.3.6.1.4.1.52.4.13.3
OBJECT IDENTIFIER

linkQualityMgnt		1.3.6.1.4.1.52.4.13.4
OBJECT IDENTIFIER

apSnmpMgnt		1.3.6.1.4.1.52.4.13.5
OBJECT IDENTIFIER

sysEntity		1.3.6.1.4.1.52.4.13.6
OBJECT IDENTIFIER

apSecurityMgnt		1.3.6.1.4.1.52.4.13.7
OBJECT IDENTIFIER

apRadioInterfaceMgnt		1.3.6.1.4.1.52.4.13.8
OBJECT IDENTIFIER

apEtherInterfaceMgnt		1.3.6.1.4.1.52.4.13.9
OBJECT IDENTIFIER

apFilterControlMgnt		1.3.6.1.4.1.52.4.13.10
OBJECT IDENTIFIER

apVLANMgnt		1.3.6.1.4.1.52.4.13.11
OBJECT IDENTIFIER

apAuthenticationMgnt		1.3.6.1.4.1.52.4.13.12
OBJECT IDENTIFIER

apWStationSessionMgnt		1.3.6.1.4.1.52.4.13.13
OBJECT IDENTIFIER

apRogueApMgnt		1.3.6.1.4.1.52.4.13.14
OBJECT IDENTIFIER

apAdminMgnt		1.3.6.1.4.1.52.4.13.15
OBJECT IDENTIFIER

apResetMgt		1.3.6.1.4.1.52.4.13.16
OBJECT IDENTIFIER

apSNTPMgnt		1.3.6.1.4.1.52.4.13.17
OBJECT IDENTIFIER

apDNSMgnt		1.3.6.1.4.1.52.4.13.18
OBJECT IDENTIFIER

apIappMgnt		1.3.6.1.4.1.52.4.13.19
OBJECT IDENTIFIER

apSyslogConfigMgnt		1.3.6.1.4.1.52.4.13.20
OBJECT IDENTIFIER

apEventLogMgnt		1.3.6.1.4.1.52.4.13.21
OBJECT IDENTIFIER

apWSLSupportMgnt		1.3.6.1.4.1.52.4.13.22
OBJECT IDENTIFIER

apWMMMgnt		1.3.6.1.4.1.52.4.13.23
OBJECT IDENTIFIER

apNotificationTrapTree		1.3.6.1.4.1.52.4.13.100
OBJECT IDENTIFIER

apFilterControlBridge		1.3.6.1.4.1.52.4.13.10.1
This value indicates the local bridge filter setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApFilterControlAPManage		1.3.6.1.4.1.52.4.13.10.2
This value indicates the AP management filter setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApFilterControlEthernet		1.3.6.1.4.1.52.4.13.10.3
This value indicates the ethernet filter setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApFilterProtocolTable		1.3.6.1.4.1.52.4.13.10.4
Table of descriptive and status information about configuration of the filter protocol table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApFilterProtocolEntry

enterpriseApFilterProtocolEntry		1.3.6.1.4.1.52.4.13.10.4.1
An entry in the filter protocol table, containing information about configuration of one filter table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApFilterProtocolEntry

enterpriseApFilterProtocolIndex		1.3.6.1.4.1.52.4.13.10.4.1.1
Index of the Protocol Filters.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

enterpriseApFilterProtocolName		1.3.6.1.4.1.52.4.13.10.4.1.2
This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

enterpriseApFilterProtocolISODesignator		1.3.6.1.4.1.52.4.13.10.4.1.3
This value indicates the name of the protocol filter.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

enterpriseApFilterProtocolState		1.3.6.1.4.1.52.4.13.10.4.1.4
This value indicates whether the protocol filter is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apvGlobalIBSSRelayMode		1.3.6.1.4.1.52.4.13.10.5
This value indicates the setting of the global IBSS Relay mode among the VAPs. In Per-VAP Mode enable, the traffic between the VAPs should be blocked. In Al-VAP Mode enable, the traffic between should not be blocked.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	perVapModeEnable(1), allVapModeEnable(2)

apvFilterControlTable		1.3.6.1.4.1.52.4.13.10.6
Table of the control and status information about configuration of the filter Control for each Vap.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApvFilterControlEntry

apvFilterControlEntry		1.3.6.1.4.1.52.4.13.10.6.1
An entry in the table, containing information about configuration of the filter for each Vap of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApvFilterControlEntry

apvFilterControlIndex		1.3.6.1.4.1.52.4.13.10.6.1.1
Index of the configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apvIBSSFilterControl		1.3.6.1.4.1.52.4.13.10.6.1.2
This value indicates the local bridge filter(IBSS Relay Filter) setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apvAPManageFilterControl		1.3.6.1.4.1.52.4.13.10.6.1.3
This value indicates the AP management filter setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

comPortControl		1.3.6.1.4.1.52.4.13.1.1
The administrative enable/disable state for COM Port Control in a System.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

macFilterTable		1.3.6.1.4.1.52.4.13.2.1
Table of status information about each configured MAC Filtering Entry.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MacFilterEntry

macFilterEntry		1.3.6.1.4.1.52.4.13.2.1.1
An entry in the table, containing information about configuration of MAC Filter.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	MacFilterEntry

macFilterIndex		1.3.6.1.4.1.52.4.13.2.1.1.1
Filter index.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

macFilterAddress		1.3.6.1.4.1.52.4.13.2.1.1.2
This values indicates the MAC address of the MAC Filter entry.
Status: deprecated	Access: read-write
OBJECT-TYPE
	MacAddress

macFilterAllowedToGo		1.3.6.1.4.1.52.4.13.2.1.1.3
The administrative allow/deny state for that specified MAC Filter Entry.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	allow(1), deny(2)

macFilterOpeStatus		1.3.6.1.4.1.52.4.13.2.1.1.4
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new MAC address will be added after next writing MAC address to that new entry. The adding action will be taken on the index that grater than 1.
Status: deprecated	Access: read-create
OBJECT-TYPE
	INTEGER	other(0), valid(1), invalid(2), create(3)

apMacFilterControl		1.3.6.1.4.1.52.4.13.2.2
This value indicates the control of the MAC filter setting.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apvMacFilterOperateTable		1.3.6.1.4.1.52.4.13.2.3
The Table used to manage the function in MAC Filter Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApvMacFilterOperateEntry

apvMacFilterOperateEntry		1.3.6.1.4.1.52.4.13.2.3.1
An entry in the table, containing information about configuration in one VAP of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApvMacFilterOperateEntry

apvMacFilterPermission		1.3.6.1.4.1.52.4.13.2.3.1.1
This values indicates the Permission on all the active filter entry for each Vap. The negative permission will be applied on any inactive entry or any MAC that is not in the table.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	allowed(1), denied(2)

apvMacFilterAddressToAdd		1.3.6.1.4.1.52.4.13.2.3.1.2
This values indicates the MAC address to be added to the local MAC filter table as an active entry for each Vap.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

apvMacFilterTable		1.3.6.1.4.1.52.4.13.2.4
Table of status information about each configured MAC Address Filtering Entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApvMacFilterEntry

apvMacFilterEntry		1.3.6.1.4.1.52.4.13.2.4.1
An entry in the table, containing information about configuration in one radio of the AP. MacFilterEntry is created and managed using localMACFilterMgnt Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApvMacFilterEntry

apvMacFilterIndex		1.3.6.1.4.1.52.4.13.2.4.1.1
MAC Filter index in each VAP.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apvMacFilterAddress		1.3.6.1.4.1.52.4.13.2.4.1.2
This values indicates the MAC address of the filter entry.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

apvMacFilterActivity		1.3.6.1.4.1.52.4.13.2.4.1.3
This value indicates the Activity of the MAC table entry by the filter permission. If allow(1), the filter permission will be applied to the MAC address. If denied(2), the filter permission will not be applied to the MAC address. If delete_entry(3), the filter entry will be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	allow(1), denied(2), deleteEntry(3)

qosModeControl		1.3.6.1.4.1.52.4.13.3.1
The administrative status and control of the QoS mode for the QoS management.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	qosoff(1), qossa(2), qosda(3), qosether(4), qos8021p(5)

qosMACTypeTable		1.3.6.1.4.1.52.4.13.3.2
Table of status information about each configured MAC Type Entry for the QoS Management.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QosMACTypeEntry

qosMACTypeEntry		1.3.6.1.4.1.52.4.13.3.2.1
An entry in the table, containing information about configuration MAC Type Entry for the QoS Management.
Status: current	Access: not-accessible
OBJECT-TYPE
	QosMACTypeEntry

qosMACTypeIndex		1.3.6.1.4.1.52.4.13.3.2.1.1
Qos MAC Type index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

qosMACTypeAddress		1.3.6.1.4.1.52.4.13.3.2.1.2
This values indicates the MAC address of that specified index in the entry.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

qosMACTypePriority		1.3.6.1.4.1.52.4.13.3.2.1.3
This values indicates the level of priority of that specified MAC Address in entry.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7

qosMACTypeOpeStatus		1.3.6.1.4.1.52.4.13.3.2.1.4
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new MAC address will be added after next writing MAC address to that new entry. The adding action will be taken on the index that grater than 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(0), valid(1), invalid(2), create(3)

qosEtherTypeTable		1.3.6.1.4.1.52.4.13.3.3
Table of status information about each configured Ether Type Entry for QoS Management.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QosEtherTypeEntry

qosEtherTypeEntry		1.3.6.1.4.1.52.4.13.3.3.1
An entry in the table, containing information about configuration Ether Type for QoS Management.
Status: current	Access: not-accessible
OBJECT-TYPE
	QosEtherTypeEntry

qosEtherTypeIndex		1.3.6.1.4.1.52.4.13.3.3.1.1
Qos Ether Type index in the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

qosEtherTypeHexValue		1.3.6.1.4.1.52.4.13.3.3.1.2
The Hex Value to indicate the type of Ether of that specified index in the entry.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

qosEtherTypePriority		1.3.6.1.4.1.52.4.13.3.3.1.3
This values indicates the level of priority of that specified MAC Address in entry.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7

qosEtherTypeOpeStatus		1.3.6.1.4.1.52.4.13.3.3.1.4
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new Ether Value will be added after next writing Ether Type Value to that new entry. The adding action will be taken on the index that grater than 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(0), valid(1), invalid(2), create(3)

qosQueueingMode		1.3.6.1.4.1.52.4.13.3.4
The administrative control of the QoS Queuing mode for the QoS management.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	weighted-fair(1), strict-priority(2)

qosSVPStatus		1.3.6.1.4.1.52.4.13.3.5
The administrative enable/disable state for SVP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

linkQualityTable		1.3.6.1.4.1.52.4.13.4.1
Table of status information about the radio Interface Link Quality Entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LinkQualityEntry

linkQualityEntry		1.3.6.1.4.1.52.4.13.4.1.1
An entry in the table, containing information about configuration of the radio Interface Link Quality.
Status: current	Access: not-accessible
OBJECT-TYPE
	LinkQualityEntry

linkQualityRadioIndex		1.3.6.1.4.1.52.4.13.4.1.1.1
This is the value to define the index of the radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

linkQualityStaIndex		1.3.6.1.4.1.52.4.13.4.1.1.2
This is value to define the index of link station.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

linkQualityStaMacAddress		1.3.6.1.4.1.52.4.13.4.1.1.3
This values indicates the MAC address of the link station.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

linkQualityStaRssi		1.3.6.1.4.1.52.4.13.4.1.1.4
This values indicates the percentage RSSI of the link station.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

trapControl		1.3.6.1.4.1.52.4.13.5.1
The administrative enable/disable state for SNMP Trap Control in a System.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapConfiguration		1.3.6.1.4.1.52.4.13.5.2
OBJECT IDENTIFIER

trapSysSystemUp		1.3.6.1.4.1.52.4.13.5.2.1
The administrative enable/disable state for SNMP sysSystemUp trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapSysSystemDown		1.3.6.1.4.1.52.4.13.5.2.2
The administrative enable/disable state for SNMP sysSystemDown trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapSysRadiusServerChanged		1.3.6.1.4.1.52.4.13.5.2.3
The administrative enable/disable state for SNMP sysRadiusServerChanged trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11StationAssociation		1.3.6.1.4.1.52.4.13.5.2.4
The administrative enable/disable state for SNMP dot11StationAssociation trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11StationReAssociation		1.3.6.1.4.1.52.4.13.5.2.5
The administrative enable/disable state for SNMP dot11StationReAssociation trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11StationAuthentication		1.3.6.1.4.1.52.4.13.5.2.6
The administrative enable/disable state for SNMP dot11StationAuthentication trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11StationRequestFail		1.3.6.1.4.1.52.4.13.5.2.7
The administrative enable/disable state for SNMP dot11StationRequestFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapLocalMacAddrAuthFail		1.3.6.1.4.1.52.4.13.5.2.9
The administrative enable/disable state for SNMP localMacAddrAuthFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapLocalMacAddrAuthSuccess		1.3.6.1.4.1.52.4.13.5.2.10
The administrative enable/disable state for SNMP localMacAddrAuthSuccess trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot1xAuthNotInitiated		1.3.6.1.4.1.52.4.13.5.2.11
The administrative enable/disable state for SNMP dot1xAuthNotInitiated trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot1xAuthSuccess		1.3.6.1.4.1.52.4.13.5.2.12
The administrative enable/disable state for SNMP dot1xAuthSuccess trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot1xAuthFail		1.3.6.1.4.1.52.4.13.5.2.13
The administrative enable/disable state for SNMP dot1xAuthFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot1xMacAddrAuthSuccess		1.3.6.1.4.1.52.4.13.5.2.14
The administrative enable/disable state for SNMP dot1xMacAddrAuthSuccess trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot1xMacAddrAuthFail		1.3.6.1.4.1.52.4.13.5.2.15
The administrative enable/disable state for SNMP dot1xMacAddrAuthFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapPppLogonFail		1.3.6.1.4.1.52.4.13.5.2.16
The administrative enable/disable state for SNMP pppLogonFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapIappStationRoamedFrom		1.3.6.1.4.1.52.4.13.5.2.17
The administrative enable/disable state for SNMP iappStationRoamedFrom trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapIappStationRoamedTo		1.3.6.1.4.1.52.4.13.5.2.18
The administrative enable/disable state for SNMP iappStationRoamedFrom trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapIappContextDataSent		1.3.6.1.4.1.52.4.13.5.2.19
The administrative enable/disable state for SNMP iappContextDataSent trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapSntpServerFail		1.3.6.1.4.1.52.4.13.5.2.20
The administrative enable/disable state for SNMP sntpServerFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11InterfaceAFail		1.3.6.1.4.1.52.4.13.5.2.21
The administrative enable/disable state for SNMP dot11InterfaceAFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11InterfaceGFail		1.3.6.1.4.1.52.4.13.5.2.22
The administrative enable/disable state for SNMP dot11InterfaceGFail trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

trapDot11WirelessSTPDetection		1.3.6.1.4.1.52.4.13.5.2.23
The administrative enable/disable state for SNMP dot11WirelessSTPDetection trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSnmpTrapDestinationTable		1.3.6.1.4.1.52.4.13.5.3
Table of descriptive and status information about configuration of each trap receiving server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApSnmpTrapDestinationEntry

apSnmpTrapDestinationEntry		1.3.6.1.4.1.52.4.13.5.3.1
An entry in the table, containing information about configuration of one trap receiving server.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApSnmpTrapDestinationEntry

apSnmpTrapDestinationIndex		1.3.6.1.4.1.52.4.13.5.3.1.1
Index of the Trap Destination Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

apSnmpTrapDestinationCommunity		1.3.6.1.4.1.52.4.13.5.3.1.2
The SNMP Trap Community
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

apSnmpTrapDestinationIP		1.3.6.1.4.1.52.4.13.5.3.1.3
The IP address of the trap receiving server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

apSnmpTrapDestinationState		1.3.6.1.4.1.52.4.13.5.3.1.4
This value indicates whether the trap receiving server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSnmpCommunityReadOnly		1.3.6.1.4.1.52.4.13.5.4
The SNMP Read Only Community. The value if read, will only show ******.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

apSnmpCommunityReadWrite		1.3.6.1.4.1.52.4.13.5.5
The SNMP Read Write Community. The value if read, will only show *****.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

apSnmpVersionFilter		1.3.6.1.4.1.52.4.13.5.6
To set the version-filter of SNMP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enableSNMPv1SNMPv2c(1), disableSNMPv1SNMPv2c(2)

swHardwareVer		1.3.6.1.4.1.52.4.13.6.1
Hardware version of the main board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

swBootRomVer		1.3.6.1.4.1.52.4.13.6.2
Boot ROM code version of the main board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

swOpCodeVer		1.3.6.1.4.1.52.4.13.6.3
Operation code version of the main board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

swSerialNumber		1.3.6.1.4.1.52.4.13.6.4
Serial Number of the Access Point.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

swProductName		1.3.6.1.4.1.52.4.13.6.5
The Product Name of the Access Point.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

swCountrySetting		1.3.6.1.4.1.52.4.13.6.6
The current CountryCode Setting of the Access Point.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

apRadioSecurityTable		1.3.6.1.4.1.52.4.13.7.1
Table of descriptive and status information about configuration of each radio in terms of security settings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApRadioSecurityEntry

apRadioSecurityEntry		1.3.6.1.4.1.52.4.13.7.1.1
An entry in the table, containing information about configuration of one radio of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApRadioSecurityEntry

apRadioSecurityIndex		1.3.6.1.4.1.52.4.13.7.1.1.1
Radio Index for security settings.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apRadioSecurityWEPAuthType		1.3.6.1.4.1.52.4.13.7.1.1.2
This value indicates the type of WEP authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	opensystem(0), sharedkey(1), wpa(2), wpapsk(3), wpawpa2mixed(4), wpawpa2pskmixed(5), wpa2(6), wpa2psk(7)

apRadioSecuritySharedKeyLen		1.3.6.1.4.1.52.4.13.7.1.1.3
This value indicates the shared key length for this radio interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), sixtyFour(1), oneHundredTwentyEight(2), oneHundredFiftyTwo(3)

apRadioSecurityWPAMode		1.3.6.1.4.1.52.4.13.7.1.1.4
This value indicates the state of WPA for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	supported(0), required(1), notSupported(2)

apRadioSecurityWPAKeyType		1.3.6.1.4.1.52.4.13.7.1.1.5
This value indicates the type of WPA Key Management in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dot1x(0), presharedkey(1)

apRadioSecurityWPACipher		1.3.6.1.4.1.52.4.13.7.1.1.6
This value indicates the type of WPA Cipher in use for this radio interface.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	wep(0), tkip(1), aes(2)

apRadioSecurityWPAPSKType		1.3.6.1.4.1.52.4.13.7.1.1.7
This value indicates the type of WPA Pre Shared Key in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hex(0), alphanumeric(1)

apRadioSecurityWPAPSK		1.3.6.1.4.1.52.4.13.7.1.1.8
This value indicates WPA Pre Shared Key in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

apRadioSecurityWEPKeyType		1.3.6.1.4.1.52.4.13.7.1.1.9
This value indicates the type of WEP Key in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hexadecimal(0), alphanumeric(1)

apRadioSecurityWEPEnabled		1.3.6.1.4.1.52.4.13.7.1.1.10
This value indicates whether WEP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apRadioSecurityWPACipherSuite		1.3.6.1.4.1.52.4.13.7.1.1.11
This value indicates the type of WPA Cipher Suite in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	aesccmp(0), tkip(1), wep(2)

apRadioApSecurityWPAPreAuthentication		1.3.6.1.4.1.52.4.13.7.1.1.12
Whether Pre-Authentication is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apRadioApSecurityWPAPmksaLifetime		1.3.6.1.4.1.52.4.13.7.1.1.13
The number (in minutes) for Pmksa-Lifetime.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..14400

apSecuritySsh		1.3.6.1.4.1.52.4.13.7.2
OBJECT IDENTIFIER

apSecuritySshServerEnabled		1.3.6.1.4.1.52.4.13.7.2.1
This value indicates whether SSH server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apSecuritySshServerPort		1.3.6.1.4.1.52.4.13.7.2.2
This value indicates SSH server's port number.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

apSecuritySshTelnetServerEnabled		1.3.6.1.4.1.52.4.13.7.2.3
This value indicates whether telnet server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

enterpriseApRadioTable		1.3.6.1.4.1.52.4.13.8.2
Table of descriptive and status information about configuration of each radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioEntry

enterpriseApRadioEntry		1.3.6.1.4.1.52.4.13.8.2.1
An entry in the table, containing information about configuration of one radio of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioEntry

enterpriseApRadioIndex		1.3.6.1.4.1.52.4.13.8.2.1.1
Radio Index for configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

enterpriseApRadioAutoChannel		1.3.6.1.4.1.52.4.13.8.2.1.2
This value indicates whether auto channel selection is enabled or not for this radio interface
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApRadioTransmitPower		1.3.6.1.4.1.52.4.13.8.2.1.3
This value indicates the transmit power for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	full(1), half(2), quarter(3), eighth(4), min(5)

enterpriseApRadioTurboMode		1.3.6.1.4.1.52.4.13.8.2.1.4
This value indicates whether turbo mode is enabled for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), invalid(3)

enterpriseApRadioDataRate		1.3.6.1.4.1.52.4.13.8.2.1.5
This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best data rate for the interface
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	oneMbps(1), twoMbps(2), fiveAndHalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fourtyEightMbps(48), fiftyFourMbps(54), auto(255)

enterpriseApRadioGMode		1.3.6.1.4.1.52.4.13.8.2.1.6
This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	bOnly(1), gOnly(2), bg(3), invalid(4)

enterpriseApRadioAntennaMode		1.3.6.1.4.1.52.4.13.8.2.1.7
This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: both(1) means use both built-in antennas, left(2) means use left side. right(3) means use right side. invalid(4) means not support. This setting is only valid for the 802.11g interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	both(1), left(2), right(3), invalid(4)

rogueApState		1.3.6.1.4.1.52.4.13.8.2.1.8
This value is used to enable/disable Rogue Ap Detection for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

rogueApInterval		1.3.6.1.4.1.52.4.13.8.2.1.9
How often to scan for Rogue Aps. The interval in minutes, with default of 720(minutes).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	30..10080

rogueApDuration		1.3.6.1.4.1.52.4.13.8.2.1.10
How long to scan each channel (in milliseconds). A longer duration will yield more complete results. A shorter duration will allow clients a better chance of remaining connected. Default value is 350(milliseconds).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	200..1000

rogueApScanNow		1.3.6.1.4.1.52.4.13.8.2.1.11
When writing the value to enable, the AP will trigger the Rouge AP scan function. The value will always return disable(2).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApRadioAntennaModeControl		1.3.6.1.4.1.52.4.13.8.2.1.12
This value indicates which antenna is in use for the radio Interface. The values are interpreted as follows: fixed(1) specify to use built-in antennas, external(2) specify to use one external antenna.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(1), external(2)

enterpriseApRadioFixedAntennaType		1.3.6.1.4.1.52.4.13.8.2.1.13
This value indicates which antenna type is in use as the fixed antenna is selected.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	diversity(1), left(2), right(3)

enterpriseApRadioAntennaID		1.3.6.1.4.1.52.4.13.8.2.1.14
This value indicates which antenna ID will be in use for the radio Interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

enterpriseApRadioMulticastDataRate		1.3.6.1.4.1.52.4.13.8.2.1.15
This value indicates the data rate for mc/bc packets from this radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), and fiftyFourMbps(54) are for 11a and g-only mode. The default for b-only and b+g mode is oneMbps(1), twoMbps(2), fiveAndHalfMbps(5) and elevenMbps(11).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	oneMbps(1), twoMbps(2), fiveAndHalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), fiftyFourMbps(54)

enterpriseApRadioAutoDataRate		1.3.6.1.4.1.52.4.13.8.2.1.16
This value indicates whether automated data rate is enabled or not for this radio interface
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApRadioPreamble		1.3.6.1.4.1.52.4.13.8.2.1.17
This value indicates the preamble length of 11g. The values are interpreted as follows: long(1) sets the preamble length to long. short(2) sets the preamble length to short. invalid(3) means not support. This setting is only valid for the 802.11g interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	long(1), short(2), invalid(3)

enterpriseApRadioSWRetryMode		1.3.6.1.4.1.52.4.13.8.2.1.18
This value indicates whether SW retty mode is enabled or not for this radio interface
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApVapRadioTable		1.3.6.1.4.1.52.4.13.8.3
Table of descriptive and status information about configuration of each Vap radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApVapRadioEntry

enterpriseApVapRadioEntry		1.3.6.1.4.1.52.4.13.8.3.1
An entry in the table, containing information about configuration of one Vap radio of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApVapRadioEntry

enterpriseApVapRadioIndex		1.3.6.1.4.1.52.4.13.8.3.1.1
Radio Index for configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

enterpriseApVapRadioState		1.3.6.1.4.1.52.4.13.8.3.1.2
This value indicates the state of the radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApVapRadioSecureAccess		1.3.6.1.4.1.52.4.13.8.3.1.3
This value indicates whether secure access is enabled for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

enterpriseApVapRadioMaxAssoc		1.3.6.1.4.1.52.4.13.8.3.1.4
This value indicates the max number of clients allowed on this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

enterpriseApVapRadioTransmitKey		1.3.6.1.4.1.52.4.13.8.3.1.5
This value indicates default transmit key in use for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

enterpriseApVapRadioDescription		1.3.6.1.4.1.52.4.13.8.3.1.6
This value indicates the description for this radio interface.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

enterpriseApVapRadioDefefaultPriority		1.3.6.1.4.1.52.4.13.8.3.1.7
This values indicates the level of default priority of that specified VAP in entry.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7

enterpriseApRadioWdsTable		1.3.6.1.4.1.52.4.13.8.4
Table of configuration information for Wds for each Radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioWdsEntry

enterpriseApRadioWdsEntry		1.3.6.1.4.1.52.4.13.8.4.1
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable). The table does not contain the radio index as a member of the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioWdsEntry

wdsApRole		1.3.6.1.4.1.52.4.13.8.4.1.1
This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(3): Bridge Mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	roleAp(1), roleBridgeMaster(2), roleBridge(3)

wdsApAckTimeout		1.3.6.1.4.1.52.4.13.8.4.1.2
This value indicates the WDS Ack timeout for this radio in us, and the following values can be set to the system: 0 Set wireless Ack Timeout as system default 20 0 to 1 miles: Ack timeout is 20 us 40 1 to 3 miles: Ack timeout is 40 us 75 3 to 6 miles: Ack timeout is 75 us 115 6 to 10 miles: Ack timeout is 115 us
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

enterpriseApRadioWdsPeerTable		1.3.6.1.4.1.52.4.13.8.5
Table of configuration information for Wds Peers for each Radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioWdsPeerEntry

enterpriseApRadioWdsPeerEntry		1.3.6.1.4.1.52.4.13.8.5.1
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable) and the peer index (Up to 8). The table does not contain the radio index as a member of the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioWdsPeerEntry

wdsPeerIndex		1.3.6.1.4.1.52.4.13.8.5.1.1
Peer Index for the radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..8

wdsPeerBssid		1.3.6.1.4.1.52.4.13.8.5.1.2
The BSSID for this peer.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..17)

wdsPeerRSSI		1.3.6.1.4.1.52.4.13.8.5.1.3
This value indicates the RSSI value of the WDS peer link.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

enterpriseApRadioWEPKeysTable		1.3.6.1.4.1.52.4.13.8.6
Conceptual table for WEP default keys.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioWEPKeysEntry

enterpriseApRadioWEPKeysEntry		1.3.6.1.4.1.52.4.13.8.6.1
An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so, the value of the WEPkey.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioWEPKeysEntry

enterpriseApRadioWEPKeysIndex		1.3.6.1.4.1.52.4.13.8.6.1.1
WEP Key Index for the radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

enterpriseApRadioWEPKeyType		1.3.6.1.4.1.52.4.13.8.6.1.2
status of the WEP Key type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	hexadecimalKey(1), alphanumericKey(2), otherKey(3)

enterpriseApRadioWEPKeyLength		1.3.6.1.4.1.52.4.13.8.6.1.3
status of the WEP Key Length.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	keyLength64Bit(1), keyLength128Bit(2), keyLength152Bit(3), keyLengthOther(4)

enterpriseApRadioAvAntennaListTable		1.3.6.1.4.1.52.4.13.8.7
Conceptual table for Available Antenna List used in the Radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioAvAntennaListEntry

enterpriseApRadioAvAntennaListEntry		1.3.6.1.4.1.52.4.13.8.7.1
An Entry (conceptual row) in the Antenna List Table. A collection of objects containing information used to show if an Antenna as been defined and if so, the value of the antenna Id.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioAvAntennaListEntry

enterpriseApRadioAvAntennaIndex		1.3.6.1.4.1.52.4.13.8.7.1.1
Available Antenna List Index for the radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..65535

enterpriseApRadioAvAntennaId		1.3.6.1.4.1.52.4.13.8.7.1.2
Available antenna Id in the entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

enterpriseApRadioAvAntennaDesc		1.3.6.1.4.1.52.4.13.8.7.1.3
The description of the antenna ID.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

enterpriseApRadioAvChannelListTable		1.3.6.1.4.1.52.4.13.8.8
Conceptual table for Available Channel List used in the Radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EnterpriseApRadioAvChannelListEntry

enterpriseApRadioAvChannelListEntry		1.3.6.1.4.1.52.4.13.8.8.1
An Entry (conceptual row) in the Channel List Table. A collection of objects containing information used to show if a Channel No. as been defined and if so, the value of the Channel No.
Status: current	Access: not-accessible
OBJECT-TYPE
	EnterpriseApRadioAvChannelListEntry

enterpriseApRadioAvChannelIndex		1.3.6.1.4.1.52.4.13.8.8.1.1
Channel List Index for the radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..65535

enterpriseApRadioAvChannelNo		1.3.6.1.4.1.52.4.13.8.8.1.2
Available channel number in the entry
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

apEtherNetConfig		1.3.6.1.4.1.52.4.13.9.1
OBJECT IDENTIFIER

netConfigIPAddress		1.3.6.1.4.1.52.4.13.9.1.1
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

netConfigSubnetMask		1.3.6.1.4.1.52.4.13.9.1.2
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

netConfigDefaultGateway		1.3.6.1.4.1.52.4.13.9.1.3
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

netConfigHttpState		1.3.6.1.4.1.52.4.13.9.1.4
Whether HTTP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

netConfigHttpPort		1.3.6.1.4.1.52.4.13.9.1.5
The port number for HTTP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	514..65535

netConfigHttpsState		1.3.6.1.4.1.52.4.13.9.1.6
Whether Secure HTTP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

netConfigHttpsPort		1.3.6.1.4.1.52.4.13.9.1.7
The port number for Secure HTTP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	514..65535

netConfigDHCPState		1.3.6.1.4.1.52.4.13.9.1.8
Whether DHCP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apVLANMgntNativeId		1.3.6.1.4.1.52.4.13.11.1
This value indicates the native VLAN Id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

apVLANMgntState		1.3.6.1.4.1.52.4.13.11.2
This value indicates whether VLANs are enabled or disabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apVLANMgntStateNextBoot		1.3.6.1.4.1.52.4.13.11.3
This value indicates the VLANs state for the next reset.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apVLANMgntEtherUntaggedVlanId		1.3.6.1.4.1.52.4.13.11.7
This value indicates the Untagged VlanID for Ether Interface.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

apNativeVlanTable		1.3.6.1.4.1.52.4.13.11.6
Table used to manage the Vlans for each wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApNativeVlanEntry

apNativeVlanEntry		1.3.6.1.4.1.52.4.13.11.6.1
An entry in the table, containing information about VLAN configuration of one wireless interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApNativeVlanEntry

apNativeVlanIfIndex		1.3.6.1.4.1.52.4.13.11.6.1.1
Interface Index of the wireless interface for which the VLAN is assigned to.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apNativeVlanSsidNumber		1.3.6.1.4.1.52.4.13.11.6.1.2
Associated Number for Service Set Id (SSID) of the wireless interface for which the VLAN is assigned to. Note: This is for future support of multiple SSIDs per radio interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apNativeVlanVlanId		1.3.6.1.4.1.52.4.13.11.6.1.3
This value indicates the native VLAN Id of the wireless interface associated with the if index and the SSID number(if it is not 0).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

apNativeVlanState		1.3.6.1.4.1.52.4.13.11.6.1.4
This value indicates the Native VLANs state.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apAuthenticationSetupEntry		1.3.6.1.4.1.52.4.13.12.1
OBJECT IDENTIFIER

ap8021xState		1.3.6.1.4.1.52.4.13.12.1.1
This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), supported(1), required(2)

ap8021xBroadcastKeyRefreshRate		1.3.6.1.4.1.52.4.13.12.1.2
The number (in minutes) between changing the broadcast key for 802.1X and WPA clients
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1440

ap8021xSessionKeyRefreshRate		1.3.6.1.4.1.52.4.13.12.1.3
The number (in minutes) between changing session keys for 802.1X and WPA clients
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1440

ap8021xReauthenticationTimeout		1.3.6.1.4.1.52.4.13.12.1.4
The number (in minutes) between forcing 802.1X clients to reauthenticate
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1440

apAuthenticationMode		1.3.6.1.4.1.52.4.13.12.1.5
This value indicates the type of MAC authentication or RADIUS authentication in use, or not in use.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), local(1), radius(2)

apAuthenticationServerTable		1.3.6.1.4.1.52.4.13.12.2
Table of descriptive and status information about configuration of each authentication server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApAuthenticationServerEntry

apAuthenticationServerEntry		1.3.6.1.4.1.52.4.13.12.2.1
An entry in the table, containing information about configuration of one authentication server of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApAuthenticationServerEntry

apAuthenticationServerIndex		1.3.6.1.4.1.52.4.13.12.2.1.1
Index of the Authentication Server
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apAuthenticationServer		1.3.6.1.4.1.52.4.13.12.2.1.2
This value indicates the IP address or host name of the authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

apAuthenticationPort		1.3.6.1.4.1.52.4.13.12.2.1.3
This value indicates the UDP Port used by the authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1024..65535

apAuthenticationKey		1.3.6.1.4.1.52.4.13.12.2.1.4
This value indicates the shared key used by the authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

apAuthenticationRetransmit		1.3.6.1.4.1.52.4.13.12.2.1.5
This value indicates the retransmit timer length used by the authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..30

apAuthenticationTimeout		1.3.6.1.4.1.52.4.13.12.2.1.6
This value indicates the Timeout value(sec) used by the authentication server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..60

apAuthenticationAcctPort		1.3.6.1.4.1.52.4.13.12.2.1.7
UDP Accounting Port. The valid range is from 1024-65535. A value of 0 means accounting is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

apAuthenticationAcctInterimUpdate		1.3.6.1.4.1.52.4.13.12.2.1.8
The interval between sending accounting updates.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	60..86400

apAuthenticationAcctState		1.3.6.1.4.1.52.4.13.12.2.1.9
This value indicates whether the Accounting Server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apAuthenticationSupplicantTable		1.3.6.1.4.1.52.4.13.12.3
Table of descriptive and status information about configuration of supplicant
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApAuthenticationSupplicantEntry

apAuthenticationSupplicantEntry		1.3.6.1.4.1.52.4.13.12.3.1
An entry in the table, containing information about configuration of one supplicant.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApAuthenticationSupplicantEntry

ap8021xSuppIndex		1.3.6.1.4.1.52.4.13.12.3.1.1
Index of the interface for which this supplicant is running. Currently only the ethernet interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

ap8021xSuppState		1.3.6.1.4.1.52.4.13.12.3.1.2
This object is used to enable or disable the 802.1X supplicant.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ap8021xSuppUser		1.3.6.1.4.1.52.4.13.12.3.1.3
This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ap8021xSuppPasswd		1.3.6.1.4.1.52.4.13.12.3.1.4
This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

apvAuthenticationSetupTable		1.3.6.1.4.1.52.4.13.12.4
Table of descriptive and status information about configuration of 8021x for each Vap.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApvAuthenticationSetupEntry

apvAuthenticationSetupEntry		1.3.6.1.4.1.52.4.13.12.4.1
An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApvAuthenticationSetupEntry

apv8021xIndex		1.3.6.1.4.1.52.4.13.12.4.1.1
Index for configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apv8021xState		1.3.6.1.4.1.52.4.13.12.4.1.2
This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), supported(1), required(2)

apv8021xBroadcastKeyRefreshRate		1.3.6.1.4.1.52.4.13.12.4.1.3
The number (in minutes) between changing the broadcast key for 802.1X and WPA clients
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1440

apv8021xSessionKeyRefreshRate		1.3.6.1.4.1.52.4.13.12.4.1.4
The number (in minutes) between changing history keys for 802.1X and WPA clients
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1440

apv8021xReauthenticationTimeout		1.3.6.1.4.1.52.4.13.12.4.1.5
The number (in minutes) between forcing 802.1X clients to reauthenticate
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

apvMACAuthenticationMode		1.3.6.1.4.1.52.4.13.12.4.1.6
This value indicates the mode of MAC authentication in use.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), local(1), remote(2)

apvMACAuthenticationTimeout		1.3.6.1.4.1.52.4.13.12.4.1.7
The number (in minutes) between forcing RADIUS MAC to authenticate.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

apvMACAuthenticationPasswd		1.3.6.1.4.1.52.4.13.12.4.1.8
This value indicates the password for MAC RADIUS Authentication. If value is configured, will display ****. Else will display EMPTY.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..31)

apWStationSessionTable		1.3.6.1.4.1.52.4.13.13.1
This table list all sessions (wireless stations) status
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApWStationSessionEntry

apWStationSessionEntry		1.3.6.1.4.1.52.4.13.13.1.1
An entry in the table, containing information about status and statistics of the wireless station.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApWStationSessionEntry

apWStationSessionIfIndex		1.3.6.1.4.1.52.4.13.13.1.1.1
Interface index for the radio this session is associated with.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

apWStationSessionStationAddres		1.3.6.1.4.1.52.4.13.13.1.1.2
The unique MAC Address of the station for this session.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

apWStationSessionAuthenticated		1.3.6.1.4.1.52.4.13.13.1.1.3
Whether the session is authenticated or not.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

apWStationSessionAssociated		1.3.6.1.4.1.52.4.13.13.1.1.4
Whether the session is associated or not. It is rare case that not associated stations show up in the table.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

apWStationSessionIsForwarding		1.3.6.1.4.1.52.4.13.13.1.1.5
Whether the AP is forwarding the client station traffic (higher level authentication)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

apWStationSessionKeyType		1.3.6.1.4.1.52.4.13.13.1.1.6
The encryption key type used by the station. Note that wpa-wep is not supported
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), staticWep(2), dynamicWep(3), wpaWep(4), wpaTkip(5), wpaAes(6)

apWStationSessionAssociationId		1.3.6.1.4.1.52.4.13.13.1.1.7
The internal association identify number
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

apWStationSessionLastAuthenticatedTime		1.3.6.1.4.1.52.4.13.13.1.1.8
This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

apWStationSessionAssociatedTime		1.3.6.1.4.1.52.4.13.13.1.1.9
This is the time in hundredths of a second since the client associated. The value is related to the system startup
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

apWStationSessionLastAssociatedTime		1.3.6.1.4.1.52.4.13.13.1.1.10
This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

apWStationSessionLastDisassociatedTime		1.3.6.1.4.1.52.4.13.13.1.1.11
This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

apWStationSessionTxPacketCount		1.3.6.1.4.1.52.4.13.13.1.1.12
This is the number of packets transmitted from the client to the AP. It includes data, control and management packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

apWStationSessionRxPacketCount		1.3.6.1.4.1.52.4.13.13.1.1.13
This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

apWStationSessionTxByteCount		1.3.6.1.4.1.52.4.13.13.1.1.14
This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

apWStationSessionRxByteCount		1.3.6.1.4.1.52.4.13.13.1.1.15
This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

apWStationSessionVlanID		1.3.6.1.4.1.52.4.13.13.1.1.16
The current VLAN Id used by the station.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rogueApDetectionTable		1.3.6.1.4.1.52.4.13.14.1
Table of each AP that has been detected.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RogueApDetectionEntry

rogueApDetectionEntry		1.3.6.1.4.1.52.4.13.14.1.1
An entry in the table, containing information about any AP detected.
Status: current	Access: not-accessible
OBJECT-TYPE
	RogueApDetectionEntry

rogueApIndex		1.3.6.1.4.1.52.4.13.14.1.1.1
Monotonically increasing index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..128

rogueApBssid		1.3.6.1.4.1.52.4.13.14.1.1.2
The AP BSSID
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

rogueApSsid		1.3.6.1.4.1.52.4.13.14.1.1.3
The AP SSID
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..40)

rogueApPortNumber		1.3.6.1.4.1.52.4.13.14.1.1.4
Interface index for the radio.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rogueApChannelNumber		1.3.6.1.4.1.52.4.13.14.1.1.5
Channel where Ap detected.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rogueApRSSIValue		1.3.6.1.4.1.52.4.13.14.1.1.6
RSSI for AP detected.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

apRougeApControl		1.3.6.1.4.1.52.4.13.14.2
OBJECT IDENTIFIER

rogueApRADIUSAuthenticate		1.3.6.1.4.1.52.4.13.14.2.1
Value is used to enable/disable RADIUS Authentication.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

rogueApClear		1.3.6.1.4.1.52.4.13.14.2.2
This object is set to clear(1) to clear the Rogue AP detection table. When read, the value will have no meaning.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

apAdminUsername		1.3.6.1.4.1.52.4.13.15.1
This value indicates the username for management login.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

appAdminPassword		1.3.6.1.4.1.52.4.13.15.2
This value indicates the password for management login.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

apRestartOpCodeFile		1.3.6.1.4.1.52.4.13.16.1
Name of op-code file for start-up.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..127)

apRestartControl		1.3.6.1.4.1.52.4.13.16.2
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	running(1), warmBoot(2), coldBoot(3)

apSNTPState		1.3.6.1.4.1.52.4.13.17.1
This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSNTPPrimaryServer		1.3.6.1.4.1.52.4.13.17.2
This value indicates the IP address of the primary SNTP server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

apSNTPSecondaryServer		1.3.6.1.4.1.52.4.13.17.3
This value indicates the IP address of the secondary SNTP server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

apSNTPTimezone		1.3.6.1.4.1.52.4.13.17.4
This value indicates which timezone to use.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enewetakKwajalein(0), midwayIsland(1), hawaii(2), alaska(3), pacific(4), arizona(5), mountain(6), central(7), mexicoCity(8), saskatchewan(9), bogota(10), eastern(11), indiana(12), atlantic(13), caracas(14), santiago(15), newfoundland(16), brasilia(17), buenos(18), midAtlantic(19), azores(20), casablanca(21), greenwichMeanTimeDublin(22), greenwichMeanTimeLisbon(23), amsterdam(24), stockholm(25), bratislava(26), prague(27), paris(28), sofija(29), athens(30), bucharest(31), cairo(32), harare(33), helsinki(34), israel(35), baghdad(36), moscow(37), tehran(38), abuDhabi(39), vogograd(40), islamabad(41), almaty(42), bangkok(43), beijing(44), taipei(45), tokyo(46), brisbane(47), canberra(48), guam(49), hobart(50), magadan(51), fiji(52), wellington(53)

apSNTPDST		1.3.6.1.4.1.52.4.13.17.5
This value indicates whether Daylight Savings Time is enabled or not.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSNTPDSTStartMonth		1.3.6.1.4.1.52.4.13.17.6
This value indicates the starting month for Daylight Savings Time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..12

apSNTPDSTStartDay		1.3.6.1.4.1.52.4.13.17.7
This value indicates the starting day for Daylight Savings Time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

apSNTPDSTEndMonth		1.3.6.1.4.1.52.4.13.17.8
This value indicates the ending month for Daylight Savings Time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..12

apSNTPDSTEndDay		1.3.6.1.4.1.52.4.13.17.9
This value indicates the ending day for Daylight Savings Time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

apDNSPrimaryServer		1.3.6.1.4.1.52.4.13.18.1
This value indicates the IP address of the primary DNS server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

apDNSSecondaryServer		1.3.6.1.4.1.52.4.13.18.2
This value indicates the IP address of the secondary DNS server.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

apIappEnabled		1.3.6.1.4.1.52.4.13.19.1
Whether IAPP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apLogConfigState		1.3.6.1.4.1.52.4.13.20.1
This value indicates whether syslog is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSyslogConsoleState		1.3.6.1.4.1.52.4.13.20.2
This value indicates whether syslog console logging is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSyslogLevel		1.3.6.1.4.1.52.4.13.20.3
This value indicates the syslog logging level.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)

apSyslogServerTable		1.3.6.1.4.1.52.4.13.20.4
Table of descriptive and status information about configuration of each syslog server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApSyslogServerEntry

apSyslogServerEntry		1.3.6.1.4.1.52.4.13.20.4.1
An entry in the table, containing information about configuration of one syslog server of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApSyslogServerEntry

apSyslogServerIndex		1.3.6.1.4.1.52.4.13.20.4.1.1
Index of the Syslog Server
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..4

apSyslogServerState		1.3.6.1.4.1.52.4.13.20.4.1.2
This value indicates whether the syslog server is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apSyslogServerIPAddress		1.3.6.1.4.1.52.4.13.20.4.1.3
This value indicates the IP address of the syslog server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

apSyslogServerPort		1.3.6.1.4.1.52.4.13.20.4.1.4
This value indicates the UDP Port used by the syslog server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1024..65535

apEventLogTable		1.3.6.1.4.1.52.4.13.21.1
This table is a snapshot of the current event log.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApEventLogEntry

apEventLogEntry		1.3.6.1.4.1.52.4.13.21.1.1
An entry in the table, containing one message from the event log.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApEventLogEntry

apEventLogIndex		1.3.6.1.4.1.52.4.13.21.1.1.1
Index of the Event Log Message
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..128

apEventLogMessage		1.3.6.1.4.1.52.4.13.21.1.1.2
The Event Log Message
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..256)

apEventLogClear		1.3.6.1.4.1.52.4.13.21.2
This object is set to 1 to clear the event log. When read, the value will have no meaning.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clearLog(1)

apWSLSupportControl		1.3.6.1.4.1.52.4.13.22.1
The administrative enable/disable state for the control of the WSL function.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apWSLSupportMasterAddress		1.3.6.1.4.1.52.4.13.22.2
This value indicates IP address of the main WSL.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

apWSLSupportSecondaryAddress		1.3.6.1.4.1.52.4.13.22.3
This value indicates IP address of the peer WSL.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

apWSLSupportPort		1.3.6.1.4.1.52.4.13.22.4
This value indicates the TCP Port used by the WSL server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1024..65535

apWSLSupportHeartbeatInterval		1.3.6.1.4.1.52.4.13.22.5
This value indicates the WSL Heartbeat Interval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

apWSLSupportHeartbeatLastChange		1.3.6.1.4.1.52.4.13.22.6
The sysUpTime at which the Heartbeat was last modified. The format is defined as hh:mm:ss - dd:mm:yy
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

apWSLSupportOperationMode		1.3.6.1.4.1.52.4.13.22.7
This attribute indicates that the WSL Operation Mode in 0: AP in standalone mode, or 1: AP in ETS WSL managed mode (associated mode).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	standalone(0), associated(1)

apWSLSupportRxThreshold		1.3.6.1.4.1.52.4.13.22.8
This value indicates the WSL CCA rejection threshold in dBm scale.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-128..127

apWSLSupportControlStatus		1.3.6.1.4.1.52.4.13.22.9
The operative enable/disable state for the control of the WSL function.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apWSLRFAreaPollControl		1.3.6.1.4.1.52.4.13.22.10
The administrative enable/disable state for the control of the WSL RF Area Poll function.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apWSLRFAreaPollControlStatus		1.3.6.1.4.1.52.4.13.22.11
The operative enable/disable state for the control of the WSL RF Area Poll function.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

apWMMControlTable		1.3.6.1.4.1.52.4.13.23.1
Table for WMM configuration per radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApWMMControlEntry

apWMMControlEntry		1.3.6.1.4.1.52.4.13.23.1.1
An Entry in the apWMMControlTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApWMMControlEntry

apWMMState		1.3.6.1.4.1.52.4.13.23.1.1.1
This value indicates the WMM state.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), required(1), supported(2)

apWMMBssParamTable		1.3.6.1.4.1.52.4.13.23.2
Conceptual table for EDCA default parameter values at a non-AP QSTA. This table shall contain the four entries of the EDCA parameters corresponding to four possible ACs (access category): 1) AC_BE (best effort, ACI=0) 2) AC_BK (background, ACI=1) 3) AC_VI (video, ACI=2) 4) AC_VO (voice, ACI=3)
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApWMMBssParamEntry

apWMMBssParamEntry		1.3.6.1.4.1.52.4.13.23.2.1
An Entry (conceptual row) in the apWMMBssParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApWMMBssParamEntry

apWMMBssParamIndex		1.3.6.1.4.1.52.4.13.23.2.1.1
The index used to identify instances of the columnar objects in the apWMMBssParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2) 4) 4 AC_VO (voice, ACI=3)
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

apWMMBssParamCWmin		1.3.6.1.4.1.52.4.13.23.2.1.2
This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMBssParamCWmax		1.3.6.1.4.1.52.4.13.23.2.1.3
This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMBssParamAIFSN		1.3.6.1.4.1.52.4.13.23.2.1.4
This attribute shall specify the number of slots, after a SIFS duration, that the QSTA, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMBssParamTXOPLimit		1.3.6.1.4.1.52.4.13.23.2.1.5
This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a non-AP QSTA.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

apWMMBssParamAdmissionControl		1.3.6.1.4.1.52.4.13.23.2.1.6
This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apWMMApParamTable		1.3.6.1.4.1.52.4.13.23.3
Conceptual table for EDCA default parameter values at the QAP. This table shall contain the four entries of the EDCA parameters corresponding to four possible ACs (access category): 1) AC_BE (best effort, ACI=0) 2) AC_BK (background, ACI=1) 3) AC_VI (video, ACI=2) 4) AC_VO (voice, ACI=3)
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ApWMMApParamEntry

apWMMApParamEntry		1.3.6.1.4.1.52.4.13.23.3.1
An Entry (conceptual row) in the apWMMApParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	ApWMMApParamEntry

apWMMApParamIndex		1.3.6.1.4.1.52.4.13.23.3.1.1
The index used to identify instances of the columnar objects in the apWMMApParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2) 4) 4 AC_VO (voice, ACI=3)
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

apWMMApParamCWmin		1.3.6.1.4.1.52.4.13.23.3.1.2
This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMApParamCWmax		1.3.6.1.4.1.52.4.13.23.3.1.3
This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMApParamAIFSN		1.3.6.1.4.1.52.4.13.23.3.1.4
This attribute shall specify the number of slots, after a SIFS duration, that the QAP, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..15

apWMMApParamTXOPLimit		1.3.6.1.4.1.52.4.13.23.3.1.5
This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a QAP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

apWMMApParamAdmissionControl		1.3.6.1.4.1.52.4.13.23.3.1.6
This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

apNotificationObjects		1.3.6.1.4.1.52.4.13.100.1
OBJECT IDENTIFIER

apNotificationDot11MacAddr		1.3.6.1.4.1.52.4.13.100.1.1
Mac Address of the affected interface, returned with traps only.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

apNotificationDot11Station		1.3.6.1.4.1.52.4.13.100.1.2
This attribute holds the MAC address of the wireless station
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

apNotificationDot11RequestType		1.3.6.1.4.1.52.4.13.100.1.3
This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), association(2), reAssociation(3), authentication(4)

apNotificationDot11ReasonCode		1.3.6.1.4.1.52.4.13.100.1.4
This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal error Value = 4: Out of sequence frame Value = 5: Un-supported algorithm Value = 6: Invalid frame length Value = 7: WEP is required on the AP Value = 8: WEP not allowed Value = 9: Challenge text mismatch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalidModeOrState(1), unAuthenticatedStation(2), internalError(3), outOfSequenceFrame(4), unsupportedAlgorithm(5), invalidFrameLngth(6), wepRequiredOnAP(7), wepNotAllowed(8), challengeTextMismatch(9)

apNotificationDot11IpAddress		1.3.6.1.4.1.52.4.13.100.1.5
This value indicates the IP address of the Access Point
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

apNotificationDot11AuthenticatorMacAddr		1.3.6.1.4.1.52.4.13.100.1.6
This attribute holds the MAC address of the authenticator for the AP.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

apNotificationTrapObjects		1.3.6.1.4.1.52.4.13.100.2
OBJECT IDENTIFIER

sysSystemUp		1.3.6.1.4.1.52.4.13.100.2.1
The system up notification shall be sent when the AP is fully up and running.
Status: current	Access: read-only
NOTIFICATION-TYPE

sysSystemDown		1.3.6.1.4.1.52.4.13.100.2.2
The system down notification shall be sent before the AP is about to reboot.
Status: current	Access: read-only
NOTIFICATION-TYPE

sysRadiusServerChanged		1.3.6.1.4.1.52.4.13.100.2.3
The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11StationAssociation		1.3.6.1.4.1.52.4.13.100.2.4
The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11StationReAssociation		1.3.6.1.4.1.52.4.13.100.2.5
The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11StationAuthentication		1.3.6.1.4.1.52.4.13.100.2.6
The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11StationRequestFail		1.3.6.1.4.1.52.4.13.100.2.7
The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot1xMacAddrAuthSuccess		1.3.6.1.4.1.52.4.13.100.2.9
The 802.1X MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot1xMacAddrAuthFail		1.3.6.1.4.1.52.4.13.100.2.10
The 802.1X MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot1xAuthNotInitiated		1.3.6.1.4.1.52.4.13.100.2.11
The 802.1X authentication not initiated notification shall be sent when a station did not initiate 802.1X authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1X authentication.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot1xAuthSuccess		1.3.6.1.4.1.52.4.13.100.2.12
The 802.1X authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot1xAuthFail		1.3.6.1.4.1.52.4.13.100.2.13
The 802.1X authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
Status: current	Access: read-only
NOTIFICATION-TYPE

localMacAddrAuthSuccess		1.3.6.1.4.1.52.4.13.100.2.14
The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current	Access: read-only
NOTIFICATION-TYPE

localMacAddrAuthFail		1.3.6.1.4.1.52.4.13.100.2.15
The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current	Access: read-only
NOTIFICATION-TYPE

pppLogonFail		1.3.6.1.4.1.52.4.13.100.2.16
The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password.
Status: current	Access: read-only
NOTIFICATION-TYPE

iappStationRoamedFrom		1.3.6.1.4.1.52.4.13.100.2.17
The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP.
Status: current	Access: read-only
NOTIFICATION-TYPE

iappStationRoamedTo		1.3.6.1.4.1.52.4.13.100.2.18
The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP.
Status: current	Access: read-only
NOTIFICATION-TYPE

iappContextDataSent		1.3.6.1.4.1.52.4.13.100.2.19
The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP.
Status: current	Access: read-only
NOTIFICATION-TYPE

sntpServerFail		1.3.6.1.4.1.52.4.13.100.2.20
The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11InterfaceAFail		1.3.6.1.4.1.52.4.13.100.2.21
The InterfaceAFail notification shall be sent out when 802.11a wireless interface has failed.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11InterfaceGFail		1.3.6.1.4.1.52.4.13.100.2.22
The InterfaceGFail notification shall be sent out when 802.11g wireless interface has failed.
Status: current	Access: read-only
NOTIFICATION-TYPE

dot11WirelessSTPDetection		1.3.6.1.4.1.52.4.13.100.2.23
The WirelessSTPDetection notification shall be sent out when wireless STP packet has detected.
Status: current	Access: read-only
NOTIFICATION-TYPE