CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB

File: CT-FASTPATH-DYNAMIC-ARP-INSPECTION-MIB.mib (16853 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC Q-BRIDGE-MIB
IF-MIB CTRON-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
TimeTicks Counter32 TEXTUAL-CONVENTION
RowStatus RowPointer MacAddress
StorageType TruthValue DisplayString
PhysAddress VlanIndex ifIndex
ctDynamicArpInspectionExpMib

Defined Types

CtAgentDaiVlanConfigEntry  
SEQUENCE    
  ctAgentDaiVlanIndex VlanIndex
  ctAgentDaiVlanDynArpInspEnable TruthValue
  ctAgentDaiVlanLoggingEnable TruthValue
  ctAgentDaiVlanArpAclName DisplayString
  ctAgentDaiVlanArpAclStaticFlag TruthValue

CtAgentDaiVlanStatsEntry  
SEQUENCE    
  ctAgentDaiVlanStatsIndex VlanIndex
  ctAgentDaiVlanPktsForwarded Counter32
  ctAgentDaiVlanPktsDropped Counter32
  ctAgentDaiVlanDhcpDrops Counter32
  ctAgentDaiVlanDhcpPermits Counter32
  ctAgentDaiVlanAclDrops Counter32
  ctAgentDaiVlanAclPermits Counter32
  ctAgentDaiVlanSrcMacFailures Counter32
  ctAgentDaiVlanDstMacFailures Counter32
  ctAgentDaiVlanIpValidFailures Counter32

CtAgentDaiIfConfigEntry  
SEQUENCE    
  ctAgentDaiIfTrustEnable TruthValue
  ctAgentDaiIfRateLimit Unsigned32
  ctAgentDaiIfBurstInterval Unsigned32

Defined Values

ctFastPathDynamicArpInspectionMIB 1.3.6.1.4.1.52.4.2.36.1
The Enterasys MIB for FASTPATH Dynamic ARP INspection
MODULE-IDENTITY    

ctAgentDaiConfigGroup 1.3.6.1.4.1.52.4.2.36.1.1
OBJECT IDENTIFIER    

ctAgentDaiSrcMacValidate 1.3.6.1.4.1.52.4.2.36.1.1.1
This object indicates whether Sender MAC validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiDstMacValidate 1.3.6.1.4.1.52.4.2.36.1.1.2
This object indicates whether Target MAC validation in the ARP Response packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiIPValidate 1.3.6.1.4.1.52.4.2.36.1.1.3
This object indicates whether IP address validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiVlanConfigTable 1.3.6.1.4.1.52.4.2.36.1.1.4
A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtAgentDaiVlanConfigEntry

ctAgentDaiVlanConfigEntry 1.3.6.1.4.1.52.4.2.36.1.1.4.1
A row instance contains the configuration for Dynamic ARP Inspection at each existing VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  CtAgentDaiVlanConfigEntry  

ctAgentDaiVlanIndex 1.3.6.1.4.1.52.4.2.36.1.1.4.1.1
This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIndex  

ctAgentDaiVlanDynArpInspEnable 1.3.6.1.4.1.52.4.2.36.1.1.4.1.2
This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic ARP Inspection is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiVlanLoggingEnable 1.3.6.1.4.1.52.4.2.36.1.1.4.1.3
This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspection loging is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiVlanArpAclName 1.3.6.1.4.1.52.4.2.36.1.1.4.1.4
This object indicates the ARP ACL name set for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

ctAgentDaiVlanArpAclStaticFlag 1.3.6.1.4.1.52.4.2.36.1.1.4.1.5
This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set to 'false', static flag is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAagentDaiStatsReset 1.3.6.1.4.1.52.4.2.36.1.1.5
Clear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reset(1)  

ctAgentDaiVlanStatsTable 1.3.6.1.4.1.52.4.2.36.1.1.6
A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtAgentDaiVlanStatsEntry

ctAgentDaiVlanStatsEntry 1.3.6.1.4.1.52.4.2.36.1.1.6.1
A row instance contains the Dynamic ARP Inspection statistics per VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  CtAgentDaiVlanStatsEntry  

ctAgentDaiVlanStatsIndex 1.3.6.1.4.1.52.4.2.36.1.1.6.1.1
This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIndex  

ctAgentDaiVlanPktsForwarded 1.3.6.1.4.1.52.4.2.36.1.1.6.1.2
Number of valid ARP packets forwarded by DAI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanPktsDropped 1.3.6.1.4.1.52.4.2.36.1.1.6.1.3
Number of invalid ARP packets dropped by DAI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanDhcpDrops 1.3.6.1.4.1.52.4.2.36.1.1.6.1.4
Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanDhcpPermits 1.3.6.1.4.1.52.4.2.36.1.1.6.1.5
Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanAclDrops 1.3.6.1.4.1.52.4.2.36.1.1.6.1.6
Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanAclPermits 1.3.6.1.4.1.52.4.2.36.1.1.6.1.7
Number of ARP packets that were permitted by DAI as there is a matching ARP ACL rule found for this Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanSrcMacFailures 1.3.6.1.4.1.52.4.2.36.1.1.6.1.8
Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanDstMacFailures 1.3.6.1.4.1.52.4.2.36.1.1.6.1.9
Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiVlanIpValidFailures 1.3.6.1.4.1.52.4.2.36.1.1.6.1.10
Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, class E addresses (240.0.0.0/4), loopback addresses (127.0.0.0/8).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ctAgentDaiIfConfigTable 1.3.6.1.4.1.52.4.2.36.1.1.7
A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtAgentDaiIfConfigEntry

ctAgentDaiIfConfigEntry 1.3.6.1.4.1.52.4.2.36.1.1.7.1
A row instance contains the configuration for Dynamic ARP Inspection at each physical interface capable of this feature.
Status: current Access: not-accessible
OBJECT-TYPE    
  CtAgentDaiIfConfigEntry  

ctAgentDaiIfTrustEnable 1.3.6.1.4.1.52.4.2.36.1.1.7.1.1
This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets coming to this interface will be subjected to ARP inspection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctAgentDaiIfRateLimit 1.3.6.1.4.1.52.4.2.36.1.1.7.1.2
This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..300  

ctAgentDaiIfBurstInterval 1.3.6.1.4.1.52.4.2.36.1.1.7.1.3
This object indicates the burst interval value for rate limiting purpose on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15