CT-ELS10-MIB

File: CT-ELS10-MIB.mib (121835 bytes)

Imported modules

RFC-1212 RFC1213-MIB RFC1155-SMI
BRIDGE-MIB RFC-1215

Imported symbols

OBJECT-TYPE DisplayString sysObjectID
ifOutDiscards ifInErrors ifOutErrors
PhysAddress Counter Gauge
IpAddress TimeTicks enterprises
dot1dStpDesignatedRoot dot1dStpRootCost dot1dStpRootPort
dot1dStpMaxAge dot1dStpHelloTime dot1dStpForwardDelay
dot1dStpPortDesignatedRoot dot1dStpPortDesignatedBridge dot1dStpPortDesignatedCost
dot1dStpPortDesignatedPort dot1dStpPortState TRAP-TYPE

Defined Types

LxhwPortEntry  
SEQUENCE    
  els10-27hwPortIndex INTEGER
  els10-27hwPortType INTEGER
  els10-27hwPortSubType INTEGER
  els10-27hwPortDiagPassed INTEGER
  els10-27hwAddr OCTET STRING

LxswFilesetEntry  
SEQUENCE    
  els10-27swIndex INTEGER
  els10-27swDesc DisplayString
  els10-27swCount INTEGER
  els10-27swType OCTET STRING
  els10-27swSizes OCTET STRING
  els10-27swStarts OCTET STRING
  els10-27swBases OCTET STRING
  els10-27swFlashBank INTEGER

LxifEntry  
SEQUENCE    
  els10-27ifIndex INTEGER
  els10-27ifThreshold INTEGER
  els10-27ifThresholdTime INTEGER
  els10-27ifRxQueueThresh INTEGER
  els10-27ifRxQueueThreshTime INTEGER
  els10-27ifTxStormCnt INTEGER
  els10-27ifTxStormTime TimeTicks
  els10-27ifFunction INTEGER
  els10-27ifRxHwFCSs Counter
  els10-27ifRxQueues Counter
  els10-27ifStatisticsTime TimeTicks
  els10-27ifForwardedChars Counter
  els10-27ifDescr DisplayString
  els10-27ifGoodRxFrames Counter
  els10-27ifGoodTxFrames Counter

Lxdot3Entry  
SEQUENCE    
  els10-27dot3Index INTEGER
  els10-27dot3TPLinkOK INTEGER
  els10-27dot3LedOn INTEGER
  els10-27dot3RxCollisions Counter
  els10-27dot3RxRunts Counter
  els10-27dot3RxLateColls Counter
  els10-27dot3TxJabbers Counter
  els10-27dot3TxBabbles Counter
  els10-27dot3TxCollisions Counter
  els10-27dot3SpeedSelection INTEGER
  els10-27dot3DuplexSelection INTEGER

LxuartEntry  
SEQUENCE    
  els10-27uartIndex INTEGER
  els10-27uartBaud INTEGER
  els10-27uartAlignmentErrors Counter
  els10-27uartOverrunErrors Counter

LxdebugEntry  
SEQUENCE    
  els10-27debugIndex INTEGER
  els10-27debugOperation INTEGER
  els10-27debugBase INTEGER
  els10-27debugLength INTEGER
  els10-27debugData OCTET STRING

LxlpbkEntry  
SEQUENCE    
  els10-27lpbkIndex INTEGER
  els10-27lpbkOperation INTEGER
  els10-27lpbkDestAddr OCTET STRING
  els10-27lpbkPktNum INTEGER
  els10-27lpbkInterval TimeTicks
  els10-27lpbkPktLength INTEGER
  els10-27lpbkIncrements INTEGER
  els10-27lpbkGoods Counter
  els10-27lpbkErrorNoReceives Counter
  els10-27lpbkErrorBadReceives Counter
  els10-27lpbkErrorSize INTEGER
  els10-27lpbkErrorSent OCTET STRING
  els10-27lpbkErrorReceived OCTET STRING
  els10-27lpbkErrorOffset INTEGER

LxprotoEntry  
SEQUENCE    
  els10-27protoIfIndex INTEGER
  els10-27protoBridge INTEGER
  els10-27protoSuppressBpdu INTEGER
  els10-27protoRipListen INTEGER
  els10-27protoTrunking INTEGER
  els10-27sprotoTransmitPacing INTEGER

LxtrunkEntry  
SEQUENCE    
  els10-27trunkIfIndex INTEGER
  els10-27trunkState INTEGER
  els10-27trunkRemoteBridgeAddr OCTET STRING
  els10-27trunkRemoteIp IpAddress
  els10-27trunkLastError INTEGER
  els10-27trunkLinkOrdinal INTEGER
  els10-27trunkLinkCount INTEGER
  els10-27trunkLastChange INTEGER

LxWorkGroupEntry  
SEQUENCE    
  els10-27WorkGroupNumber INTEGER
  els10-27WorkGroupName DisplayString
  els10-27WorkGroupPorts OCTET STRING
  els10-27WorkGroupType INTEGER

LxtrapControlEntry  
SEQUENCE    
  els10-27trapIndex INTEGER
  els10-27trapEnabled INTEGER
  els10-27trapSeverity INTEGER
  els10-27trapText DisplayString

LxtrapSeverityControlEntry  
SEQUENCE    
  els10-27trapSeverityControlSeverity INTEGER
  els10-27trapSeverityEnable INTEGER

LxtrapEntry  
SEQUENCE    
  els10-27trapEntryIndex INTEGER
  els10-27trapEntryTimeStamp TimeTicks
  els10-27trapEntryText DisplayString
  els10-27trapEntryNumber INTEGER
  els10-27trapEntrySeverity INTEGER

LxpingEntry  
SEQUENCE    
  els10-27pingNMSAddr IpAddress
  els10-27pingDestAddr IpAddress
  els10-27pingState INTEGER
  els10-27pingCount INTEGER
  els10-27pingDataSize INTEGER
  els10-27pingWait TimeTicks
  els10-27pingTimeOut TimeTicks
  els10-27pingOperation INTEGER
  els10-27pingMin TimeTicks
  els10-27pingMax TimeTicks
  els10-27pingAvg TimeTicks
  els10-27pingNumTransmitted INTEGER
  els10-27pingNumReceived INTEGER

LxtraceEntry  
SEQUENCE    
  els10-27traceNMSAddr IpAddress
  els10-27traceDestAddr IpAddress
  els10-27traceMaxTTL INTEGER
  els10-27traceDataSize INTEGER
  els10-27traceNumProbes INTEGER
  els10-27traceWait TimeTicks
  els10-27traceOperation INTEGER
  els10-27traceHop INTEGER
  els10-27traceHopAddr IpAddress
  els10-27traceProbe INTEGER
  els10-27traceState INTEGER
  els10-27traceTime TimeTicks

Els10-27volMirrorMacEntry  
SEQUENCE    
  els10-27volmirrorIndex INTEGER
  els10-27volmirrorMac1 OCTET STRING

Els10-27VlanConfigEntry  
SEQUENCE    
  els10-27VlanConfigIndex INTEGER
  els10-27VlanConfigVID INTEGER
  els10-27VlanConfigPorts INTEGER
  els10-27VlanConfigIP INTEGER
  els10-27VlanConfigIPMask INTEGER
  els10-27VlanConfigName DisplayString
  els10-27VlanConfigStatus INTEGER
  els10-27VlanConfigEstablish INTEGER

Els10-27VlanConfigEgressEntry  
SEQUENCE    
  els10-27VlanEgressIndex INTEGER
  els10-27VlanEgressVID INTEGER
  els10-27VlanEgressList INTEGER
  els10-27VlanEgressStatus INTEGER

Els10-27VlanFilterGVRPEntry  
SEQUENCE    
  els10-27VlanFilterGVRPIndex INTEGER
  els10-27VlanFilterGVRPVID INTEGER
  els10-27VlanFilterGVRPList INTEGER
  els10-27VlanFilterGVRPStatus INTEGER
  els10-27VlanFilterGVRPEstablishVID INTEGER

Els10-27VlanStaticEntry  
SEQUENCE    
  els10-27VlanStaticVID INTEGER
  els10-27VlanStaticMAC PhysAddress
  els10-27VlanStaticPort INTEGER
  els10-27VlanStaticEstablish INTEGER

Els10-27igmpCacheEntry  
SEQUENCE    
  els10-27igmpCacheAddress IpAddress
  els10-27igmpCacheIfIndex INTEGER
  els10-27igmpCacheExpiryTime TimeTicks

Els10-27FlowControlEntry  
SEQUENCE    
  els10-27FlowControlInterface INTEGER
  els10-27FlowControlEnable INTEGER
  els10-27FlowControlRxPauseFrames INTEGER
  els10-27FlowControlTxPauseFrames INTEGER

Defined Values

sigma 1.3.6.1.4.1.97
OBJECT IDENTIFIER    

sys 1.3.6.1.4.1.97.1
OBJECT IDENTIFIER    

els10-27 1.3.6.1.4.1.97.9
OBJECT IDENTIFIER    

els10-27hw 1.3.6.1.4.1.97.9.1
OBJECT IDENTIFIER    

els10-27sw 1.3.6.1.4.1.97.9.2
OBJECT IDENTIFIER    

els10-27admin 1.3.6.1.4.1.97.9.3
OBJECT IDENTIFIER    

els10-27swdis 1.3.6.1.4.1.97.9.4
OBJECT IDENTIFIER    

els10-27addr 1.3.6.1.4.1.97.9.5
OBJECT IDENTIFIER    

els10-27if 1.3.6.1.4.1.97.9.6
OBJECT IDENTIFIER    

els10-27dot3 1.3.6.1.4.1.97.9.7
OBJECT IDENTIFIER    

els10-27uart 1.3.6.1.4.1.97.9.8
OBJECT IDENTIFIER    

els10-27debug 1.3.6.1.4.1.97.9.10
OBJECT IDENTIFIER    

els10-27lpbk 1.3.6.1.4.1.97.9.11
OBJECT IDENTIFIER    

els10-27proto 1.3.6.1.4.1.97.9.12
OBJECT IDENTIFIER    

els10-27trunk 1.3.6.1.4.1.97.9.13
OBJECT IDENTIFIER    

els10-27workgroup 1.3.6.1.4.1.97.9.14
OBJECT IDENTIFIER    

els10-27trapMgt 1.3.6.1.4.1.97.9.15
OBJECT IDENTIFIER    

els10-27pingMgt 1.3.6.1.4.1.97.9.16
OBJECT IDENTIFIER    

els10-27traceMgt 1.3.6.1.4.1.97.9.17
OBJECT IDENTIFIER    

els10-27volmirrorgroup 1.3.6.1.4.1.97.9.19
OBJECT IDENTIFIER    

els10-27VlanBridgeConfig 1.3.6.1.4.1.97.9.20
OBJECT IDENTIFIER    

els10-27volipmgroup 1.3.6.1.4.1.97.9.21
OBJECT IDENTIFIER    

els10-27voligmpgroup 1.3.6.1.4.1.97.9.22
OBJECT IDENTIFIER    

els10-27FlowControlCtl 1.3.6.1.4.1.97.9.23
OBJECT IDENTIFIER    

sysID 1.3.6.1.4.1.97.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER els10-27-bridge(7)  

sysReset 1.3.6.1.4.1.97.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

sysTrapPort 1.3.6.1.4.1.97.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27hwDiagCode 1.3.6.1.4.1.97.9.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27hwManufData 1.3.6.1.4.1.97.9.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27hwPortCount 1.3.6.1.4.1.97.9.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27hwPortTable 1.3.6.1.4.1.97.9.1.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxhwPortEntry

els10-27hwPortEntry 1.3.6.1.4.1.97.9.1.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxhwPortEntry  

els10-27hwPortIndex 1.3.6.1.4.1.97.9.1.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27hwPortType 1.3.6.1.4.1.97.9.1.4.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER port-csma(1), port-uart(6), port-none(255)  

els10-27hwPortSubType 1.3.6.1.4.1.97.9.1.4.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER csmacd-tpx(13), csmacd-100-tpx(16), csmacd-100-fx(17), uart-female-9pin(80), no-information(255)  

els10-27hwPortDiagPassed 1.3.6.1.4.1.97.9.1.4.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER diag-passed(1), diag-failed(2)  

els10-27hwAddr 1.3.6.1.4.1.97.9.1.4.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  


els10-27hwUpLinkManufData 1.3.6.1.4.1.97.9.1.6
This is a 32-byte array which contains the part number, serial number, and hardware revision level of the Up-Link I/O module. This array is valid only when the els10-27hwUplink is true. If els10-27hwUplink is false, it returns an error
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swNumber 1.3.6.1.4.1.97.9.2.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27swFilesetTable 1.3.6.1.4.1.97.9.2.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxswFilesetEntry

els10-27swFilesetEntry 1.3.6.1.4.1.97.9.2.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxswFilesetEntry  

els10-27swIndex 1.3.6.1.4.1.97.9.2.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER currently-executing(1), next-boot(2)  

els10-27swDesc 1.3.6.1.4.1.97.9.2.2.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

els10-27swCount 1.3.6.1.4.1.97.9.2.2.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27swType 1.3.6.1.4.1.97.9.2.2.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swSizes 1.3.6.1.4.1.97.9.2.2.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swStarts 1.3.6.1.4.1.97.9.2.2.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swBases 1.3.6.1.4.1.97.9.2.2.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swFlashBank 1.3.6.1.4.1.97.9.2.2.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER first-bank(1), second-bank(2)  

els10-27adminFatalErr 1.3.6.1.4.1.97.9.3.1
Information about last reset: First byte, cause of reset, values: 00: power failure 01: WatchDog Timeout 02: Software Reset 03: NMS Shutdown 04-255: Fatal Error Second byte, Hw/Sw component that failed Remaining bytes, description of fault.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27adminAnyPass 1.3.6.1.4.1.97.9.3.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27adminGetPass 1.3.6.1.4.1.97.9.3.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27adminNMSIPAddr 1.3.6.1.4.1.97.9.3.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

els10-27adminStorageFailure 1.3.6.1.4.1.97.9.3.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

els10-27adminAuthenticationFailure 1.3.6.1.4.1.97.9.3.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27adminNAMReceiveCongests 1.3.6.1.4.1.97.9.3.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminArpEntries 1.3.6.1.4.1.97.9.3.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminArpStatics 1.3.6.1.4.1.97.9.3.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminArpOverflows 1.3.6.1.4.1.97.9.3.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminIpEntries 1.3.6.1.4.1.97.9.3.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminIpStatics 1.3.6.1.4.1.97.9.3.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminStaticPreference 1.3.6.1.4.1.97.9.3.16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27adminRipPreference 1.3.6.1.4.1.97.9.3.17
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27adminRipRouteDiscards 1.3.6.1.4.1.97.9.3.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27adminRebootConfig 1.3.6.1.4.1.97.9.3.19
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-change(1), tftp-config(2), revert-to-defaults(3)  

els10-27adminDisableButton 1.3.6.1.4.1.97.9.3.21
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

els10-27adminButtonSelection 1.3.6.1.4.1.97.9.3.22
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER led-any-activity(1), led-rx-activity(2), led-tx-activity(3), led-any-collision(4), led-programmed(5), led-duplex(6), led-speed(7), led-mirror(8)  

els10-27adminLEDProgramOption 1.3.6.1.4.1.97.9.3.23
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER program-led-any-error(1)  

els10-27swdisDesc 1.3.6.1.4.1.97.9.4.1
The description (0-32 bytes) of the software set currently being downloaded, or a description of the software set last downloaded since the FN1026 booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27swdisAccess 1.3.6.1.4.1.97.9.4.2
The version of software that may be downloaded. Attempts to download other versions of software will be rejected. The value for swdisAccess is embedded within the software files that are to be distributed via TFTP. Its value may be derived from the names of the software files. the NMS operator may wish to use the following special values: protected (1) No software downloads will be accepted any-software (2) A software download of any version of new software will be accepted - this is the factory default
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER protected(1), any-software(2)  

els10-27swdisWriteStatus 1.3.6.1.4.1.97.9.4.3
The status of the erase/write operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-progress(1), success(2), config-error(3), flash-error(4), config-and-flash-errors(5)  

els10-27swdisConfigIp 1.3.6.1.4.1.97.9.4.4
The IP address of the NMS (i.e., any IP host) that is allowed to use TFTP to send/retrieve the configuration file of the FN1026. A value of 0.0.0.0 (which is the factory specified default) prevents any NMS from obtaining access, while a value of 255.255.255.255 gives every NMS permission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

els10-27swdisConfigRetryTime 1.3.6.1.4.1.97.9.4.5
The number of seconds that the FN1026 will wait for an acknowledgment before it retransmits an unacknowledged TFTP data block. The factory specified default is 5 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27swdisConfigTotalTimeout 1.3.6.1.4.1.97.9.4.6
The number of seconds that the FN1026 will wait for an acknowledgment to a data block before it cancels a TFTP session. The factory specified default is 25 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrStatics 1.3.6.1.4.1.97.9.5.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27addrDynamics 1.3.6.1.4.1.97.9.5.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27addrDynamicMax 1.3.6.1.4.1.97.9.5.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

els10-27addrDynamicOverflows 1.3.6.1.4.1.97.9.5.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27addrFlags 1.3.6.1.4.1.97.9.5.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrMAC 1.3.6.1.4.1.97.9.5.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27addrPort 1.3.6.1.4.1.97.9.5.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrOperation 1.3.6.1.4.1.97.9.5.8
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER read-random(1), read-next(2), update(4), delete(5), read-block(6)  

els10-27addrIndex 1.3.6.1.4.1.97.9.5.9
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrNext 1.3.6.1.4.1.97.9.5.10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrBlockSize 1.3.6.1.4.1.97.9.5.19
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27addrBlock 1.3.6.1.4.1.97.9.5.20
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27ifTable 1.3.6.1.4.1.97.9.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxifEntry

els10-27ifEntry 1.3.6.1.4.1.97.9.6.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxifEntry  

els10-27ifIndex 1.3.6.1.4.1.97.9.6.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27ifThreshold 1.3.6.1.4.1.97.9.6.1.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27ifThresholdTime 1.3.6.1.4.1.97.9.6.1.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27ifRxQueueThresh 1.3.6.1.4.1.97.9.6.1.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27ifRxQueueThreshTime 1.3.6.1.4.1.97.9.6.1.1.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27ifTxStormCnt 1.3.6.1.4.1.97.9.6.1.1.8
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27ifTxStormTime 1.3.6.1.4.1.97.9.6.1.1.9
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27ifFunction 1.3.6.1.4.1.97.9.6.1.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27ifRxHwFCSs 1.3.6.1.4.1.97.9.6.1.1.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27ifRxQueues 1.3.6.1.4.1.97.9.6.1.1.19
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27ifStatisticsTime 1.3.6.1.4.1.97.9.6.1.1.27
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27ifForwardedChars 1.3.6.1.4.1.97.9.6.1.1.28
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27ifDescr 1.3.6.1.4.1.97.9.6.1.1.29
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

els10-27ifGoodRxFrames 1.3.6.1.4.1.97.9.6.1.1.30
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27ifGoodTxFrames 1.3.6.1.4.1.97.9.6.1.1.31
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3Table 1.3.6.1.4.1.97.9.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Lxdot3Entry

els10-27dot3Entry 1.3.6.1.4.1.97.9.7.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Lxdot3Entry  

els10-27dot3Index 1.3.6.1.4.1.97.9.7.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27dot3TPLinkOK 1.3.6.1.4.1.97.9.7.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

els10-27dot3LedOn 1.3.6.1.4.1.97.9.7.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER led-on(1), led-off(2)  

els10-27dot3RxCollisions 1.3.6.1.4.1.97.9.7.1.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3RxRunts 1.3.6.1.4.1.97.9.7.1.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3RxLateColls 1.3.6.1.4.1.97.9.7.1.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3TxJabbers 1.3.6.1.4.1.97.9.7.1.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3TxBabbles 1.3.6.1.4.1.97.9.7.1.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3TxCollisions 1.3.6.1.4.1.97.9.7.1.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27dot3SpeedSelection 1.3.6.1.4.1.97.9.7.1.1.13
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER speed-10mbit(1), speed-100mbit(2), speed-auto(3)  

els10-27dot3DuplexSelection 1.3.6.1.4.1.97.9.7.1.1.14
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER duplex-auto(1), duplex-half(2), duplex-full(3)  

els10-27uartTable 1.3.6.1.4.1.97.9.8.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxuartEntry

els10-27uartEntry 1.3.6.1.4.1.97.9.8.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxuartEntry  

els10-27uartIndex 1.3.6.1.4.1.97.9.8.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27uartBaud 1.3.6.1.4.1.97.9.8.1.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b2400-baud(3), b4800-baud(4), b9600-baud(5), b19200-baud(6)  

els10-27uartAlignmentErrors 1.3.6.1.4.1.97.9.8.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27uartOverrunErrors 1.3.6.1.4.1.97.9.8.1.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27debugStringID 1.3.6.1.4.1.97.9.10.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27debugString 1.3.6.1.4.1.97.9.10.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27debugTable 1.3.6.1.4.1.97.9.10.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxdebugEntry

els10-27debugEntry 1.3.6.1.4.1.97.9.10.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxdebugEntry  

els10-27debugIndex 1.3.6.1.4.1.97.9.10.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER debug-nam(1)  

els10-27debugOperation 1.3.6.1.4.1.97.9.10.3.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER examine(1), modify(2)  

els10-27debugBase 1.3.6.1.4.1.97.9.10.3.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27debugLength 1.3.6.1.4.1.97.9.10.3.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27debugData 1.3.6.1.4.1.97.9.10.3.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27lpbkTable 1.3.6.1.4.1.97.9.11.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxlpbkEntry

els10-27lpbkEntry 1.3.6.1.4.1.97.9.11.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxlpbkEntry  

els10-27lpbkIndex 1.3.6.1.4.1.97.9.11.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27lpbkOperation 1.3.6.1.4.1.97.9.11.1.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER loopback-off(1), loopback-local(2), loopback-remote(3)  

els10-27lpbkDestAddr 1.3.6.1.4.1.97.9.11.1.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27lpbkPktNum 1.3.6.1.4.1.97.9.11.1.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27lpbkInterval 1.3.6.1.4.1.97.9.11.1.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27lpbkPktLength 1.3.6.1.4.1.97.9.11.1.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27lpbkIncrements 1.3.6.1.4.1.97.9.11.1.1.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27lpbkGoods 1.3.6.1.4.1.97.9.11.1.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27lpbkErrorNoReceives 1.3.6.1.4.1.97.9.11.1.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27lpbkErrorBadReceives 1.3.6.1.4.1.97.9.11.1.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

els10-27lpbkErrorSize 1.3.6.1.4.1.97.9.11.1.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27lpbkErrorSent 1.3.6.1.4.1.97.9.11.1.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27lpbkErrorReceived 1.3.6.1.4.1.97.9.11.1.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27lpbkErrorOffset 1.3.6.1.4.1.97.9.11.1.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27protoTable 1.3.6.1.4.1.97.9.12.1
This table contains configuration information specify- ing the types of protocols used to bridge, route, translate, and filter frames for each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxprotoEntry

els10-27protoEntry 1.3.6.1.4.1.97.9.12.1.1
Each entry in this table specifies which protocols are used by a particular port in the ES/1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxprotoEntry  

els10-27protoIfIndex 1.3.6.1.4.1.97.9.12.1.1.1
Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27protoBridge 1.3.6.1.4.1.97.9.12.1.1.2
Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or none. Token Ring ports may be configured for any of the four options. The UART may only be configured to none.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), none(4)  

els10-27protoSuppressBpdu 1.3.6.1.4.1.97.9.12.1.1.3
Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets are transmitted as usual. If suppressed(2), these packets are not transmitted. This option may be needed for in- teroperability with non-802.1d spanning tree protocols (e.g., DEC LanBridge 100).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), suppressed(2)  

els10-27protoRipListen 1.3.6.1.4.1.97.9.12.1.1.4
Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

els10-27protoTrunking 1.3.6.1.4.1.97.9.12.1.1.5
Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

els10-27sprotoTransmitPacing 1.3.6.1.4.1.97.9.12.1.1.6
When enabled, introduces delays into normal transmission of frames, to reduce the probability of collisions during heavy traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

els10-27trunkTable 1.3.6.1.4.1.97.9.13.1
This table describes the trunking status and attributes of the interfaces that are configured for bridge trunking.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxtrunkEntry

els10-27trunkEntry 1.3.6.1.4.1.97.9.13.1.1
An entry exists in this table for each physical interface (port) that is configured for trunking.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxtrunkEntry  

els10-27trunkIfIndex 1.3.6.1.4.1.97.9.13.1.1.1
Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trunkState 1.3.6.1.4.1.97.9.13.1.1.2
If off(1) then this link has not been enabled for trunking. If closed(2) then this link has not yet received any Trunking PDUs. If oneway(3) then incoming Trunking PDUs do not indicate that our PDUs are being successfully received by the far end. If joined(4) then this link is actively participating in the trunk group. If perturbed(5) then this link is actively participating in the trunk group; however, the transmission of data packets has been temporarily stopped due to a change in membership of the group. If helddown(6) then an error has been detected and the link is being held out-of-service until the error clears. If broken(7) then this link has been configured for trunking, but the port is physically non-operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), closed(2), oneway(3), joined(4), perturbed(5), helddown(6), broken(7)  

els10-27trunkRemoteBridgeAddr 1.3.6.1.4.1.97.9.13.1.1.3
The MAC address portion of the bridge ID of the remote bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

els10-27trunkRemoteIp 1.3.6.1.4.1.97.9.13.1.1.4
The IP address of the remote bridge, as reported by that bridge for administrative purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27trunkLastError 1.3.6.1.4.1.97.9.13.1.1.5
The last reason for failure when the link is in closed, oneway, or helddown state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), in-bpdu(2), multiple-bridges(3), ack-lost(4), standby(5), too-many-groups(6), no-ack(7), perturbed-threshold(8), self-connect(9), port-moved(10), multiple-lan-types(11)  

els10-27trunkLinkOrdinal 1.3.6.1.4.1.97.9.13.1.1.6
The position of this link within the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trunkLinkCount 1.3.6.1.4.1.97.9.13.1.1.7
The number of links within the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trunkLastChange 1.3.6.1.4.1.97.9.13.1.1.8
The number of seconds since els10-27trunkState changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27WorkGroupNextNumber 1.3.6.1.4.1.97.9.14.1
The next available workgroup number to be used. When creating a new workgroup, it is recommended to read the value of the variable and use it to key into the workgroup table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27WorkGroupCurrentCount 1.3.6.1.4.1.97.9.14.2
The total number of workgroups currently defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27WorkGroupMaxCount 1.3.6.1.4.1.97.9.14.3
The maximum number of workgroups allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27WorkGroupTable 1.3.6.1.4.1.97.9.14.4
This table contains work group definitions for the interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxWorkGroupEntry

els10-27WorkGroupEntry 1.3.6.1.4.1.97.9.14.4.1
Each entry in this table contains a definition of a work group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxWorkGroupEntry  

els10-27WorkGroupNumber 1.3.6.1.4.1.97.9.14.4.1.1
An integer that identifies the work group, used as an index to this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27WorkGroupName 1.3.6.1.4.1.97.9.14.4.1.2
A 1-16 character work group name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

els10-27WorkGroupPorts 1.3.6.1.4.1.97.9.14.4.1.3
A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27WorkGroupType 1.3.6.1.4.1.97.9.14.4.1.4
The type of work group: all - no additional information needs to be supplied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(3), invalid(4)  

els10-27trapControlTable 1.3.6.1.4.1.97.9.15.1
This table contains information about the severity of each trap and whether the trap is currently enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxtrapControlEntry

els10-27trapControlEntry 1.3.6.1.4.1.97.9.15.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxtrapControlEntry  

els10-27trapIndex 1.3.6.1.4.1.97.9.15.1.1.1
The specific trap number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trapEnabled 1.3.6.1.4.1.97.9.15.1.1.2
Enable or disable the generation of this trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

els10-27trapSeverity 1.3.6.1.4.1.97.9.15.1.1.3
A user-definable severity, indicating the importance of the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER informational(1), warning(2), minor(3), major(4), critical(5)  

els10-27trapText 1.3.6.1.4.1.97.9.15.1.1.4
A description of the trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

els10-27trapSeverityControlTable 1.3.6.1.4.1.97.9.15.2
This table contains information about whether a class of traps of a particular severity are enabled or disabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxtrapSeverityControlEntry

els10-27trapSeverityControlEntry 1.3.6.1.4.1.97.9.15.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxtrapSeverityControlEntry  

els10-27trapSeverityControlSeverity 1.3.6.1.4.1.97.9.15.2.1.1
A user-definable severity, indicating the importance of the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER informational(1), warning(2), minor(3), major(4), critical(5)  

els10-27trapSeverityEnable 1.3.6.1.4.1.97.9.15.2.1.2
Enable or disable all traps of a given severity level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

els10-27trapIncludeText 1.3.6.1.4.1.97.9.15.3
Whether or not a formatted text string is included in the trap PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

els10-27trapTime 1.3.6.1.4.1.97.9.15.4
The time, in centiseconds, which should expire between the sending of traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27trapRetry 1.3.6.1.4.1.97.9.15.5
The number of times any enterprise-specific trap is to be sent for a given event. PDUs are retried using a truncated exponential backoff: 2 seconds, 4 seoncs, 8 seconds, 16 seconds, and then 32 seconds for all succeeding intervals.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27trapNumber 1.3.6.1.4.1.97.9.15.6
The number of traps that are in the els10-27trapTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trapTable 1.3.6.1.4.1.97.9.15.7
This table contains the latest traps that have been generated.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxtrapEntry

els10-27trapEntry 1.3.6.1.4.1.97.9.15.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxtrapEntry  

els10-27trapEntryIndex 1.3.6.1.4.1.97.9.15.7.1.1
A number representing the order in which the trap occurred in time. This 32 bit number can wrap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trapEntryTimeStamp 1.3.6.1.4.1.97.9.15.7.1.2
The time at which the trap occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27trapEntryText 1.3.6.1.4.1.97.9.15.7.1.3
A description of the trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

els10-27trapEntryNumber 1.3.6.1.4.1.97.9.15.7.1.4
The specific trap number, as specified in the TRAP PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27trapEntrySeverity 1.3.6.1.4.1.97.9.15.7.1.5
A user-definable severity, indicating the importance of the trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER informational(1), warning(2), minor(3), major(4), critical(5)  

els10-27pingDataTimeout 1.3.6.1.4.1.97.9.16.1
The time, in centiseconds, from the last ping activity (a send or receive of an ECHO_RESPONSE or ECHO_REQUEST message), to when the els10-27pingEntry information for that ping request will be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27pingTable 1.3.6.1.4.1.97.9.16.2
The set of information describing the active ping requests and their results.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxpingEntry

els10-27pingEntry 1.3.6.1.4.1.97.9.16.2.1
The parameters, state, and results of a ping request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxpingEntry  

els10-27pingNMSAddr 1.3.6.1.4.1.97.9.16.2.1.1
The IP address of the NMS, used to determine which ping request to return information on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27pingDestAddr 1.3.6.1.4.1.97.9.16.2.1.2
The IP address which is to be the destination of the ping ECHO_REQUEST. This variable cannot be set while els10-27pingOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

els10-27pingState 1.3.6.1.4.1.97.9.16.2.1.3
The current state of the ping request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-started(0), active(1), timed-out(2), completed(3)  

els10-27pingCount 1.3.6.1.4.1.97.9.16.2.1.4
The number of ping requests which are to be sent. This variable cannot be set while els10-27pingOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27pingDataSize 1.3.6.1.4.1.97.9.16.2.1.5
The datagram packet size which will be sent with the ECHO_REQUEST, in bytes. This variable cannot be set while els10-27pingOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27pingWait 1.3.6.1.4.1.97.9.16.2.1.6
The time, in centiseconds, between the sending of each ECHO_REQUEST message. This variable cannot be set while els10-27pingOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27pingTimeOut 1.3.6.1.4.1.97.9.16.2.1.7
The time, in centiseconds, since the last ECHO_RESPONSE was received (or the last ECHO_REQUEST was sent, if there have been no responses) when the ping request will time out. This variable cannot be set while els10-27pingOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27pingOperation 1.3.6.1.4.1.97.9.16.2.1.8
Setting els10-27pingOperation to on will begin the ping request. Setting els10-27pingOperation to off will terminate the ping request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

els10-27pingMin 1.3.6.1.4.1.97.9.16.2.1.9
The minimum round trip time for the ping requests and responses, in centiseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27pingMax 1.3.6.1.4.1.97.9.16.2.1.10
The maximum round trip for the ping requests and responses, in centiseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27pingAvg 1.3.6.1.4.1.97.9.16.2.1.11
The average round trip time for the ping requests and responses, in centiseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27pingNumTransmitted 1.3.6.1.4.1.97.9.16.2.1.12
The number of ICMP ECHO_REQUEST messages that have been transmitted during this ping request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27pingNumReceived 1.3.6.1.4.1.97.9.16.2.1.13
The number of ICMP ECHO_RESPONSE messages that have been received as a result of this ping request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27traceDataTimeout 1.3.6.1.4.1.97.9.17.1
The time, in centiseconds, from the last traceroute activity (the response to or timeout of the last probe sent), to when the els10-27traceEntry information for that traceroute request will be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27traceTable 1.3.6.1.4.1.97.9.17.2
The set of information describing the active traceroute requests and their results.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LxtraceEntry

els10-27traceEntry 1.3.6.1.4.1.97.9.17.2.1
The parameters, state, and results of a traceroute request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LxtraceEntry  

els10-27traceNMSAddr 1.3.6.1.4.1.97.9.17.2.1.1
The IP address of the NMS, used to determine which traceroute request to return information on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27traceDestAddr 1.3.6.1.4.1.97.9.17.2.1.2
The IP address which is to be the destination of the traceroute request.This variable cannot be set while els10-27traceOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

els10-27traceMaxTTL 1.3.6.1.4.1.97.9.17.2.1.3
The maximum time-to-live for outgoing traceroute probe packets. This determines the number of hops that can be in a traceroute. This variable cannot be set while els10-27traceOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27traceDataSize 1.3.6.1.4.1.97.9.17.2.1.4
The size of the datagram sent with each probe. This variable cannot be set while els10-27traceOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27traceNumProbes 1.3.6.1.4.1.97.9.17.2.1.5
The number of probes which are sent for each hop. This variable cannot be set while els10-27traceOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27traceWait 1.3.6.1.4.1.97.9.17.2.1.6
The time to wait in response to a probe. This variable cannot be set while els10-27traceOperation is on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

els10-27traceOperation 1.3.6.1.4.1.97.9.17.2.1.7
Setting els10-27traceOperation to on will begin the traceroute request. Setting els10-27traceOperation to off will terminate the traceroute request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

els10-27traceHop 1.3.6.1.4.1.97.9.17.2.1.8
The hop count for a set of probes with a particular TTL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27traceHopAddr 1.3.6.1.4.1.97.9.17.2.1.9
The IP address of the host which responded for a probe with a particular TTL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27traceProbe 1.3.6.1.4.1.97.9.17.2.1.10
The probe instance for a particular hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27traceState 1.3.6.1.4.1.97.9.17.2.1.11
The current state of the trace probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-started(0), active(1), time-exceeded(2), host-unreachable(3), net-unreachable(4), completed(5)  

els10-27traceTime 1.3.6.1.4.1.97.9.17.2.1.12
Round trip time of a probe for a particular hop.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27volmirrorMode 1.3.6.1.4.1.97.9.19.1
To turn port mirroring on or off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

els10-27volmirrorPort 1.3.6.1.4.1.97.9.19.2
The number of the port whose data will be mirrored to a special monitor or analyzer port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27volmonitorPort 1.3.6.1.4.1.97.9.19.3
Identifies the monitor or analyzer port to receive frames from the special mirror port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27volMirrorMacTable 1.3.6.1.4.1.97.9.19.4
A table that contains information for the mirroring on MAC addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27volMirrorMacEntry

els10-27volmirrorMacEntry 1.3.6.1.4.1.97.9.19.4.1
Information about specific unicast MAC addresses for which mirroring will act upon.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27volMirrorMacEntry  

els10-27volmirrorIndex 1.3.6.1.4.1.97.9.19.4.1.1
Entry Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27volmirrorMac1 1.3.6.1.4.1.97.9.19.4.1.2
First MAC address for mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

els10-27VlanVersionNumber 1.3.6.1.4.1.97.9.20.1
Specifies the version IEEE 802.1Q VLAN that has been implemented to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27VlanOperatingMode 1.3.6.1.4.1.97.9.20.2
Selects the mode of operation. The switch can operate as simply an 802.1d switch, or an 802.1d switch with IEEE VLAN capability (802.1Q). A read of this object will return the current operating mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ieee8021d(1), ieee8021Q(2)  

els10-27VlanResetDefaults 1.3.6.1.4.1.97.9.20.3
To reset the specified bridge. The filtering database is cleared and initialized with the entries specified in the Permananent database, and the Bridge protocol Entity is initialized. While initializing a read will return a value of reset (2). While operational a read will return a value of operating (2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER operating(1), reset(2)  

els10-27VlanGVRPEnable 1.3.6.1.4.1.97.9.20.4
If the switch is operating in 802.1Q mode, this selects whether GVRP protocol messages should be processed and VLANs configured accordingly for each port on the switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

els10-27VlanAccessList 1.3.6.1.4.1.97.9.20.5
A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared database that will automatically be kept by the firmware. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigVlan 1.3.6.1.4.1.97.9.20.6
OBJECT IDENTIFIER    

els10-27VlanNumActiveEntries 1.3.6.1.4.1.97.9.20.6.1
The number of active VLAN entries for the device. This includes both static and dynamic VLANs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27VlanNumConfiguredEntries 1.3.6.1.4.1.97.9.20.6.2
The number of configured VLAN entries for the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27VlanMaxNumEntries 1.3.6.1.4.1.97.9.20.6.3
The maximum number of VLAN entries for the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigTable 1.3.6.1.4.1.97.9.20.6.4
This table allows for the creation, deletion, and modification of specific VLANs. The ports defined within this group will be members of the 'member set' as defined in the IEEE 802.1Q specification.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27VlanConfigEntry

els10-27VlanConfigEntry 1.3.6.1.4.1.97.9.20.6.4.1
Allows for configuration of specific VLAN entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27VlanConfigEntry  

els10-27VlanConfigIndex 1.3.6.1.4.1.97.9.20.6.4.1.1
The interface being configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigVID 1.3.6.1.4.1.97.9.20.6.4.1.2
The 12 bit VLAN Identifier associated with the configured VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

els10-27VlanConfigPorts 1.3.6.1.4.1.97.9.20.6.4.1.3
Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigIP 1.3.6.1.4.1.97.9.20.6.4.1.4
The IP address to be used to access the unit on this Vlan. This must be a valid host address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigIPMask 1.3.6.1.4.1.97.9.20.6.4.1.5
The IP subnet mask to be used with this Ip address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanConfigName 1.3.6.1.4.1.97.9.20.6.4.1.6
The ASCII name associated with the configured VLAN. A set of this object prior to creating an entry by setting els10-27VlanEstablish will fail with a NO-INSTANCE error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

els10-27VlanConfigStatus 1.3.6.1.4.1.97.9.20.6.4.1.7
A set with the value of enable(1), enables all associated entries in els10-27VlanConfigVID table for the specified VLAN. A set of disable(2), disables all els10-27VlanConfigVID entries associated with the specified VLAN. A set of this object prior to creating an entry by setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

els10-27VlanConfigEstablish 1.3.6.1.4.1.97.9.20.6.4.1.8
A set of the value create(1), causes an entry to be created in the els10-27VlanConfigTable as specified by the instancing information of els10-27VlanConfigVID, els10-27VlanConfigName, and els10-27VlanConfigPorts. A set of delete(2) causes the specified entry to be removed from the table. A read of this object will always return create(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

els10-27VlanConfigEgressTable 1.3.6.1.4.1.97.9.20.6.5
This table allows for the specifying of the default VLAN ID for a specific port. If NOT configured as an 'Access' port, then packets containing this VLAN ID will have the tag stripped on egress. This will set the PVID for each port contained within the list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27VlanConfigEgressEntry

els10-27VlanConfigEgressEntry 1.3.6.1.4.1.97.9.20.6.5.1
Allows for configuration of specific VLAN entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27VlanConfigEgressEntry  

els10-27VlanEgressIndex 1.3.6.1.4.1.97.9.20.6.5.1.1
The index into the Vlan table. A port must be a member of this Vlan prior to assigning this Id as the default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanEgressVID 1.3.6.1.4.1.97.9.20.6.5.1.2
The 12 bit VLAN Identifier associated with the configured VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

els10-27VlanEgressList 1.3.6.1.4.1.97.9.20.6.5.1.3
The set of ports to which traffic destined for the VLAN specified by els10-27VlanEgressVID on the device will have this tag stripped on egress. Each octet within the value of this object specifies a set of eight ports, with thee first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanEgressStatus 1.3.6.1.4.1.97.9.20.6.5.1.4
A set with the value of enable(1), enables all associated entries in els10-27VlanEgressVID table for the specified VLAN. A set of disable(2), disables all els10-27VlanEgressVID entries associated with the specified VLAN. A set of this object prior to creating an entry by setting els10-27VlanEgressEstablish will fail with a NO-INSTANCE error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

els10-27VlanFilterGVRPTable 1.3.6.1.4.1.97.9.20.6.6
This table allows for the specifying of VLAN ID's that will be resticted from being learnt by the device. If a GVRP packet is received specifying this VLAN ID, it will be ignored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27VlanFilterGVRPEntry

els10-27VlanFilterGVRPEntry 1.3.6.1.4.1.97.9.20.6.6.1
Allows for configuration of specific entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27VlanFilterGVRPEntry  

els10-27VlanFilterGVRPIndex 1.3.6.1.4.1.97.9.20.6.6.1.1
The index into the Vlan Filter table. A maximum of 32 Vlan ID can be restricted from being learnt via GVRP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanFilterGVRPVID 1.3.6.1.4.1.97.9.20.6.6.1.2
The 12 bit VLAN Identifier associated with the configured VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

els10-27VlanFilterGVRPList 1.3.6.1.4.1.97.9.20.6.6.1.3
The set of ports that will be restricted from leaning of a VLAN ID from a GVRP message. The VLAN ID is specified by els10-27VlanFilterGVRPVID. Each octet within the value of this object specifies a set of eight ports, with thee first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27VlanFilterGVRPStatus 1.3.6.1.4.1.97.9.20.6.6.1.4
A set with the value of enable(1), enables all associated entries in els10-27VlanFilterGVRPVID table for the specified VLAN. A set of disable(2), disables all els10-27VlanFilterGVRPVID entries associated with the specified VLAN. A set of this object prior to creating an entry by setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

els10-27VlanFilterGVRPEstablishVID 1.3.6.1.4.1.97.9.20.6.6.1.5
A set of the value create(1), causes an entry to be created in the els10-27VlanFilterGVRPTable as specified by the instancing information of els10-27VlanFilterGVRpVID, and els10-27VlanFilterGVRPPorts. A set of delete(2) causes the specified entry to be removed from the table. A read of this object will always return create(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

els10-27VlanStaticTable 1.3.6.1.4.1.97.9.20.6.7
Allows for configuration of specific VLAN/MAC Address entries and to specify the port to which traffic destined for this address pair should be forwarded. These entries will not be aged out of the forwarding data base.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27VlanStaticEntry

els10-27VlanStaticEntry 1.3.6.1.4.1.97.9.20.6.7.1
Allows for specifying specific entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27VlanStaticEntry  

els10-27VlanStaticVID 1.3.6.1.4.1.97.9.20.6.7.1.1
The 12 bit VLAN Identifier associated with the configured VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

els10-27VlanStaticMAC 1.3.6.1.4.1.97.9.20.6.7.1.2
The media dependent physical address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

els10-27VlanStaticPort 1.3.6.1.4.1.97.9.20.6.7.1.3
An integer designating the port number to associate this address to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..27  

els10-27VlanStaticEstablish 1.3.6.1.4.1.97.9.20.6.7.1.4
A set of the value create(1), causes an entry to be created as specified by the instancing information of els10-27VlanSaticVID, els10-27VlanStaticMAC, and els10-27VlanStaticPorts. A set of delete(2) causes the specified entry to be removed from thetable. A read of this object will always return create(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

els10-27IPMulticastStatus 1.3.6.1.4.1.97.9.21.1
Parameter to enable or disable IP multicast filtering on the device. When enabled, the device will examine IP Multicast data packets and dynamically set up filter ports to prevent flooding. The default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

els10-27ipmInterfaceRtr 1.3.6.1.4.1.97.9.21.2
Parameter to enable or disable the inclusion of this interface in all Multicast filters. When enabled, all IP Multicast packets for all group filters will be transmitted over this interface. Value is a bit mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27igmpStatus 1.3.6.1.4.1.97.9.22.1
Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The default is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

els10-27igmpQueryStatus 1.3.6.1.4.1.97.9.22.2
Parameter to enable or disable the device to act as a Querier. If enabled, the device will send out a Query as a Proxy to solicit reports. The device will not become an IGMP router. The default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(0)  

els10-27igmpQueryCount 1.3.6.1.4.1.97.9.22.3
Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports (default is 5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27igmpPortDelay 1.3.6.1.4.1.97.9.22.4
Timeout value (mins) between IGMP Reports or IGMP Queries received on a port before the system times out the entry from the Multicast Address Filter (default is 5 minutes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27igmpCacheTable 1.3.6.1.4.1.97.9.22.5
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27igmpCacheEntry

els10-27igmpCacheEntry 1.3.6.1.4.1.97.9.22.5.1
An entry (conceptual row) in the els10-27igmpCacheTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27igmpCacheEntry  

els10-27igmpCacheAddress 1.3.6.1.4.1.97.9.22.5.1.1
The IP multicast group address for which this entry contains information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

els10-27igmpCacheIfIndex 1.3.6.1.4.1.97.9.22.5.1.2
The interface for which this entry contains infor- mation for an IP multicast group address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27igmpCacheExpiryTime 1.3.6.1.4.1.97.9.22.5.1.3
The minimum amount of time remaining before this entry will be aged out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

els10-27FlowControlBackPressure 1.3.6.1.4.1.97.9.23.1
Control back pressure on a system wide basis. On (1), Off (2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlThresholdValue 1.3.6.1.4.1.97.9.23.2
A value specified as a percent of the available buffers. When fewer than the percent of the avaialable buffers is detected, flow control will be initiated. Flow control will cease when the free buffer count meets or exceeds this percent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlPauseInteval 1.3.6.1.4.1.97.9.23.3
A value between 10 and 65535. Each pause interval is equal to '5.12 microseconds'. A value of 10 will equal '51.2 microseconds'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlTable 1.3.6.1.4.1.97.9.23.4
Provides a list of control objects over flow control parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Els10-27FlowControlEntry

els10-27FlowControlEntry 1.3.6.1.4.1.97.9.23.4.1
Defines a particular entry containing objects pertaining to definition and control over flow control ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Els10-27FlowControlEntry  

els10-27FlowControlInterface 1.3.6.1.4.1.97.9.23.4.1.1
The MIB2 interface for which this flow control information pertains
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlEnable 1.3.6.1.4.1.97.9.23.4.1.2
Control 802.3x flow control on a per interface basis. On (1), Off (2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlRxPauseFrames 1.3.6.1.4.1.97.9.23.4.1.3
The number of pause frames received on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27FlowControlTxPauseFrames 1.3.6.1.4.1.97.9.23.4.1.4
The number of pause frames transmitted on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

els10-27WriteStatusTrap 2
Sent when a bank of Flash EPROM has been erased. If els10-27swdisWriteStatus indicates success, then the unit is ready to be downloaded with the new software.
TRAP-TYPE    

els10-27PortFunctionsTrap 3
Sent whenever the current functional state (active protocols) of the port has changed.
TRAP-TYPE    

els10-27RxQueuesTrap 4
Sent whenever the number of times that the port's receiver has stopped receiving packets due to buffer space shortages has exceeded the port's limit.
TRAP-TYPE    

els10-27RxStormFlagTrap 5
Sent whenever broadcast/multicast storm protection has been invoked for the port.
TRAP-TYPE    

els10-27TxCongestsTrap 6
Sent whenever packets destined for the unit itself were discarded due to lack of buffer space.
TRAP-TYPE    

els10-27DebugStringIdTrap 8
Sent whenever the unit has a debug text string to be displayed. The text strings are sent in a stream-like fashion.
TRAP-TYPE    

els10-27LpbkOperationTrap 9
Send whenever the unit has finished a loop back test, or a loop back error has been detected.
TRAP-TYPE    

els10-27TrunkStateTrap 10
A trunking state change transition has occurred. The possible transitions are: CLOSED-ONEWAY ONEWAY-PERTURBED PERTURBED-JOINED JOINED-HELDDOWN CLOSED-HELDDOWN ONEWAY-HELDDOWN PERTURBED-HELDDOWN
TRAP-TYPE    

els10-27TrunkBridgeAddrTrap 11
The associated trunking MAC address of the bridge ID of the remote bridge has changed.
TRAP-TYPE    

els10-27TrunkIPAddrTrap 12
The associated trunking IP address of the remote bridge has changed.
TRAP-TYPE    

els10-27TrunkErrorTrap 13
An error has occurred in trunking.
TRAP-TYPE    

els10-27TrunkLinkOrdinalTrap 14
The port's index in the trunking group has changed.
TRAP-TYPE    

els10-27TrunkLinkCountTrap 15
The number of ports in the trunking group has changed.
TRAP-TYPE    

els10-27DiagUnitBootedTrap 16
The unit has booted. els10-27adminFatalErr contains information about why the unit rebooted.
TRAP-TYPE    

els10-27StorageFailureTrap 17
Sent if the unit's Configuration EEPROM has failed. The unit will not be able to reboot, and must be returned to the factory.
TRAP-TYPE    

els10-27PortCongestedTrap 18
Sent whenever outbound congestion control has been invoked for the port.
TRAP-TYPE    

els10-27TopChangeBegunTrap 19
The spanning tree topology has begun to change.
TRAP-TYPE    

els10-27TopChangeEndTrap 20
The spanning tree topology has stopped changing.
TRAP-TYPE    

els10-27IfErrorsTrap 21
Sent whenever the number of hardware errors in received and transmitted packets has exceeded the port's limit.
TRAP-TYPE    

els10-27StRootIDTrap 22
The spanning tree root bridge ID for the unit has changed.
TRAP-TYPE    

els10-27StRootCostTrap 23
The unit's spanning tree cost to the root bridge has changed.
TRAP-TYPE    

els10-27StRootPortTrap 24
The unit's spanning tree root port has changed.
TRAP-TYPE    

els10-27StMaxAgeTrap 25
The unit's spanning tree maximum age has changed.
TRAP-TYPE    

els10-27StHelloTimeTrap 26
The unit's spanning tree hello time has changed.
TRAP-TYPE    

els10-27StForwardDelayTrap 27
The unit's spanning tree forward delay time has changed.
TRAP-TYPE    

els10-27StDesigRootTrap 28
The Root Bridge ID in received Spanning Tree Configuration BPDUs from the port has changed.
TRAP-TYPE    

els10-27StPortDesigBridgeTrap 29
The bridge ID of the spanning tree designated bridge of the LAN/WAN to which the port is attached has changed.
TRAP-TYPE    

els10-27StPortDesigCostTrap 30
The cost to the spanning tree root bridge from the designated port of the LAN/WAN to which the port is attached has changed.
TRAP-TYPE    

els10-27StPortDesigPortTrap 31
The port ID of the spanning tree designated port of the LAN/WAN to which the port is attached has changed.
TRAP-TYPE    

els10-27StPortStateTrap 32
The spanning tree state of the port has changed.
TRAP-TYPE    

els10-27hwDiagTrap 100
Sent whenever the unit's diagnostics have indicated an error.
TRAP-TYPE    

els10-27InvalidConfigurationFileTrap 34
Diagnostics has detected corrupted configuration data. Default parameter values have been restored.
TRAP-TYPE    

els10-27StInvalidFlashCodeImageTrap 35
An invalid code image was detected in flash memory. An attempt will be made to obtain a valid image.
TRAP-TYPE