CT-DS0ent-MIB

File: CT-DS0ent-MIB.mib (20679 bytes)

Imported modules

RFC-1212 RFC1155-SMI SNMPv2-TC
CTRON-OIDS

Imported symbols

OBJECT-TYPE Counter Gauge
TimeTicks PhysAddress DisplayString
cabletron

Defined Types

InterfaceIndex  
INTEGER    

CtDs0ifEntry  
SEQUENCE    
  ctDs0ifIndex InterfaceIndex
  ctDs0ifDescr DisplayString
  ctDs0ifType IANActDs0ifType
  ctDs0ifMtu INTEGER
  ctDs0ifSpeed Gauge
  ctDs0ifPhysAddress PhysAddress
  ctDs0ifAdminStatus INTEGER
  ctDs0ifOperStatus INTEGER
  ctDs0ifLastChange TimeTicks
  ctDs0ifInOctets Counter
  ctDs0ifInUcastPkts Counter
  ctDs0ifInNUcastPkts Counter
  ctDs0ifInDiscards Counter
  ctDs0ifInErrors Counter
  ctDs0ifInUnknownProtos Counter
  ctDs0ifOutOctets Counter
  ctDs0ifOutUcastPkts Counter
  ctDs0ifOutNUcastPkts Counter
  ctDs0ifOutDiscards Counter
  ctDs0ifOutErrors Counter
  ctDs0ifOutQLen Gauge
  ctDs0ifSpecific OBJECT IDENTIFIER

IANActDs0ifType  
INTEGER other(1), regular1822(2), hdh1822(3), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), iso88023Csmacd(7), iso88024TokenBus(8), iso88025TokenRing(9), iso88026Man(10), starLan(11), proteon10Mbit(12), proteon80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frameRelay(32), rs232(33), para(34), arcnet(35), arcnetPlus(36), atm(37), miox25(38), sonet(39), x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), v35(45), hssi(46), hippi(47), modem(48), aal5(49), sonetPath(50), sonetVT(51), smdsIcip(52), propVirtual(53), propMultiplexor(54)    

CtDsx0ConfigEntry  
SEQUENCE    
  ctDsx0ConfigLineId DisplayString
  ctDsx0ConfigAdminStatus INTEGER
  ctDsx0ConfigOperStatus INTEGER

Defined Values

ctSSA 1.3.6.1.4.1.52.4497
OBJECT IDENTIFIER    

ctDs0Mib 1.3.6.1.4.1.52.4497.20
OBJECT IDENTIFIER    

ctDsx0Mib 1.3.6.1.4.1.52.4497.21
OBJECT IDENTIFIER    

ctDs0ifNumber 1.3.6.1.4.1.52.4497.20.1
The number of network interfaces (regardless of their current state) present on this system.
OBJECT-TYPE    
  INTEGER  

ctDs0ifTable 1.3.6.1.4.1.52.4497.20.2
A list of interface entries. The number of entries is given by the value of ctDs0ifNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    CtDs0ifEntry

ctDs0ifEntry 1.3.6.1.4.1.52.4497.20.2.1
An entry containing management information applicable to a particular interface.
OBJECT-TYPE    
  CtDs0ifEntry  

ctDs0ifIndex 1.3.6.1.4.1.52.4497.20.2.1.1
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  InterfaceIndex 0..2147483647  

ctDs0ifDescr 1.3.6.1.4.1.52.4497.20.2.1.2
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
OBJECT-TYPE    
  DisplayString Size(0..255)  

ctDs0ifType 1.3.6.1.4.1.52.4497.20.2.1.3
The type of interface. Additional values for ctDs0ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.
OBJECT-TYPE    
  IANActDs0ifType  

ctDs0ifMtu 1.3.6.1.4.1.52.4497.20.2.1.4
The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
OBJECT-TYPE    
  INTEGER  

ctDs0ifSpeed 1.3.6.1.4.1.52.4497.20.2.1.5
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ctDs0ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
OBJECT-TYPE    
  Gauge  

ctDs0ifPhysAddress 1.3.6.1.4.1.52.4497.20.2.1.6
The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained by this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
OBJECT-TYPE    
  PhysAddress  

ctDs0ifAdminStatus 1.3.6.1.4.1.52.4497.20.2.1.7
The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ctDs0ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ctDs0ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

ctDs0ifOperStatus 1.3.6.1.4.1.52.4497.20.2.1.8
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ctDs0ifAdminStatus is down(2) then ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is changed to up(1) then ctDs0ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5)  

ctDs0ifLastChange 1.3.6.1.4.1.52.4497.20.2.1.9
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
OBJECT-TYPE    
  TimeTicks  

ctDs0ifInOctets 1.3.6.1.4.1.52.4497.20.2.1.10
The total number of octets received on the interface, including framing characters.
OBJECT-TYPE    
  Counter  

ctDs0ifInUcastPkts 1.3.6.1.4.1.52.4497.20.2.1.11
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
OBJECT-TYPE    
  Counter  

ctDs0ifInNUcastPkts 1.3.6.1.4.1.52.4497.20.2.1.12
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This object is deprecated in favour of ctDs0ifInMulticastPkts and ctDs0ifInBroadcastPkts.
OBJECT-TYPE    
  Counter  

ctDs0ifInDiscards 1.3.6.1.4.1.52.4497.20.2.1.13
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

ctDs0ifInErrors 1.3.6.1.4.1.52.4497.20.2.1.14
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.
OBJECT-TYPE    
  Counter  

ctDs0ifInUnknownProtos 1.3.6.1.4.1.52.4497.20.2.1.15
For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces which support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface which does not support protocol multiplexing, this counter will always be 0.
OBJECT-TYPE    
  Counter  

ctDs0ifOutOctets 1.3.6.1.4.1.52.4497.20.2.1.16
The total number of octets transmitted out of the interface, including framing characters.
OBJECT-TYPE    
  Counter  

ctDs0ifOutUcastPkts 1.3.6.1.4.1.52.4497.20.2.1.17
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter  

ctDs0ifOutNUcastPkts 1.3.6.1.4.1.52.4497.20.2.1.18
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is deprecated in favour of ctDs0ifOutMulticastPkts and ctDs0ifOutBroadcastPkts.
OBJECT-TYPE    
  Counter  

ctDs0ifOutDiscards 1.3.6.1.4.1.52.4497.20.2.1.19
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

ctDs0ifOutErrors 1.3.6.1.4.1.52.4497.20.2.1.20
For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.
OBJECT-TYPE    
  Counter  

ctDs0ifOutQLen 1.3.6.1.4.1.52.4497.20.2.1.21
The length of the output packet queue (in packets).
OBJECT-TYPE    
  Gauge  

ctDs0ifSpecific 1.3.6.1.4.1.52.4497.20.2.1.22
A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1443. In fact, it is recommended that the media- specific MIB specify what value ifSpecific should/can take for values of ifType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ctDsx0ConfigTable 1.3.6.1.4.1.52.4497.21.1
ISDN lapd table containing configuration and operational parameters for all ISDN signaling channels on this managed device.
OBJECT-TYPE    
  SEQUENCE OF  
    CtDsx0ConfigEntry

ctDsx0ConfigEntry 1.3.6.1.4.1.52.4497.21.1.1
An entry in the ISDN Lapd Table.
OBJECT-TYPE    
  CtDsx0ConfigEntry  

ctDsx0ConfigLineId 1.3.6.1.4.1.52.4497.21.1.1.1
Line id of the Isdn Lapd table entry
OBJECT-TYPE    
  DisplayString  

ctDsx0ConfigAdminStatus 1.3.6.1.4.1.52.4497.21.1.1.2
Administration status for the Isdn Lapd table entry.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)  

ctDsx0ConfigOperStatus 1.3.6.1.4.1.52.4497.21.1.1.3
Operational status for the Isdn Lapd table entry.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)