CPQRACK-MIB

File: CPQRACK-MIB.mib (217330 bytes)

Imported modules

CPQHOST-MIB	RFC1213-MIB	RFC-1212
RFC-1215

Imported symbols

compaq	DisplayString	OBJECT-TYPE
sysName	cpqHoTrapFlags	TRAP-TYPE

Defined Types

CpqRackAssetEntry
SEQUENCE
	cpqRackAssetIndex	INTEGER
	cpqRackName	DisplayString
	cpqRackUid	DisplayString
	cpqRackSerialNum	DisplayString
	cpqRackTrapSequenceNum	INTEGER
	cpqRackHeight	INTEGER
	cpqRackWidth	INTEGER
	cpqRackDepth	INTEGER

CpqRackCommonEnclosureEntry
SEQUENCE
	cpqRackCommonEnclosureRack	INTEGER
	cpqRackCommonEnclosureIndex	INTEGER
	cpqRackCommonEnclosureModel	DisplayString
	cpqRackCommonEnclosureAssetTag	DisplayString
	cpqRackCommonEnclosurePartNumber	DisplayString
	cpqRackCommonEnclosureSparePartNumber	DisplayString
	cpqRackCommonEnclosureSerialNum	DisplayString
	cpqRackCommonEnclosureFWRev	DisplayString
	cpqRackCommonEnclosureName	DisplayString
	cpqRackCommonEnclosureNeighborNamePrev	DisplayString
	cpqRackCommonEnclosureNeighborNameNext	DisplayString
	cpqRackCommonEnclosureHeight	INTEGER
	cpqRackCommonEnclosureWidth	INTEGER
	cpqRackCommonEnclosureDepth	INTEGER
	cpqRackCommonEnclosureTrapSequenceNum	INTEGER
	cpqRackCommonEnclosureCondition	INTEGER
	cpqRackCommonEnclosureHasServerBlades	INTEGER
	cpqRackCommonEnclosureHasPowerSupplies	INTEGER
	cpqRackCommonEnclosureHasNetConnectors	INTEGER
	cpqRackCommonEnclosureHasTempSensors	INTEGER
	cpqRackCommonEnclosureHasFans	INTEGER
	cpqRackCommonEnclosureHasFuses	INTEGER
	cpqRackCommonEnclosureMgmtUID	INTEGER
	cpqRackCommonEnclosureSerialNumPrev	DisplayString
	cpqRackCommonEnclosureSerialNumNext	DisplayString
	cpqRackCommonEnclosureAddress	INTEGER
	cpqRackCommonEnclosureProductId	DisplayString
	cpqRackCommonEnclosureProductIdPrev	DisplayString
	cpqRackCommonEnclosureProductIdNext	DisplayString
	cpqRackCommonEnclosureUUID	DisplayString
	cpqRackCommonEnclosureUUIDPrev	DisplayString
	cpqRackCommonEnclosureUUIDNext	DisplayString
	cpqRackCommonEnclosureHasManagers	INTEGER

CpqRackCommonEnclosureTempEntry
SEQUENCE
	cpqRackCommonEnclosureTempRack	INTEGER
	cpqRackCommonEnclosureTempChassis	INTEGER
	cpqRackCommonEnclosureTempSensorIndex	INTEGER
	cpqRackCommonEnclosureTempSensorEnclosureName	DisplayString
	cpqRackCommonEnclosureTempLocation	DisplayString
	cpqRackCommonEnclosureTempCurrent	INTEGER
	cpqRackCommonEnclosureTempThreshold	INTEGER
	cpqRackCommonEnclosureTempCondition	INTEGER
	cpqRackCommonEnclosureTempType	INTEGER
	cpqRackCommonEnclosureTempSensorEnclosureSerialNum	DisplayString

CpqRackCommonEnclosureFanEntry
SEQUENCE
	cpqRackCommonEnclosureFanRack	INTEGER
	cpqRackCommonEnclosureFanChassis	INTEGER
	cpqRackCommonEnclosureFanIndex	INTEGER
	cpqRackCommonEnclosureFanEnclosureName	DisplayString
	cpqRackCommonEnclosureFanLocation	DisplayString
	cpqRackCommonEnclosureFanPartNumber	DisplayString
	cpqRackCommonEnclosureFanSparePartNumber	DisplayString
	cpqRackCommonEnclosureFanPresent	INTEGER
	cpqRackCommonEnclosureFanRedundant	INTEGER
	cpqRackCommonEnclosureFanRedundantGroupId	INTEGER
	cpqRackCommonEnclosureFanCondition	INTEGER
	cpqRackCommonEnclosureFanEnclosureSerialNum	DisplayString

CpqRackCommonEnclosureFuseEntry
SEQUENCE
	cpqRackCommonEnclosureFuseRack	INTEGER
	cpqRackCommonEnclosureFuseChassis	INTEGER
	cpqRackCommonEnclosureFuseIndex	INTEGER
	cpqRackCommonEnclosureFuseEnclosureName	DisplayString
	cpqRackCommonEnclosureFuseLocation	DisplayString
	cpqRackCommonEnclosureFusePresent	INTEGER
	cpqRackCommonEnclosureFuseCondition	INTEGER

CpqRackCommonEnclosureFruEntry
SEQUENCE
	cpqRackCommonEnclosureFruRack	INTEGER
	cpqRackCommonEnclosureFruChassis	INTEGER
	cpqRackCommonEnclosureFruIndex	INTEGER
	cpqRackCommonEnclosureFruEnclosureName	DisplayString
	cpqRackCommonEnclosureFruDescription	DisplayString
	cpqRackCommonEnclosureFruLocation	DisplayString
	cpqRackCommonEnclosureFruAssemblyPartNumber	DisplayString
	cpqRackCommonEnclosureFruSparePartNumber	DisplayString
	cpqRackCommonEnclosureFruAutoRev	DisplayString
	cpqRackCommonEnclosureFruSerialNum	DisplayString

CpqRackCommonEnclosureManagerEntry
SEQUENCE
	cpqRackCommonEnclosureManagerRack	INTEGER
	cpqRackCommonEnclosureManagerChassis	INTEGER
	cpqRackCommonEnclosureManagerIndex	INTEGER
	cpqRackCommonEnclosureManagerEnclosureName	DisplayString
	cpqRackCommonEnclosureManagerLocation	DisplayString
	cpqRackCommonEnclosureManagerPartNumber	DisplayString
	cpqRackCommonEnclosureManagerSparePartNumber	DisplayString
	cpqRackCommonEnclosureManagerSerialNum	DisplayString
	cpqRackCommonEnclosureManagerRole	INTEGER
	cpqRackCommonEnclosureManagerPresent	INTEGER
	cpqRackCommonEnclosureManagerRedundant	INTEGER
	cpqRackCommonEnclosureManagerCondition	INTEGER
	cpqRackCommonEnclosureManagerEnclosureSerialNum	DisplayString
	cpqRackCommonEnclosureManagerUUID	DisplayString
	cpqRackCommonEnclosureManagerFWRev	DisplayString

CpqRackServerEnclosureEntry
SEQUENCE
	cpqRackServerEnclosureRack	INTEGER
	cpqRackServerEnclosureIndex	INTEGER
	cpqRackServerEnclosureName	DisplayString
	cpqRackServerEnclosureMaxNumBlades	INTEGER
	cpqRackServerEnclosureMaxNumBladesX	INTEGER
	cpqRackServerEnclosureMaxNumBladesY	INTEGER

CpqRackPowerEnclosureEntry
SEQUENCE
	cpqRackPowerEnclosureRack	INTEGER
	cpqRackPowerEnclosureIndex	INTEGER
	cpqRackPowerEnclosureName	DisplayString
	cpqRackPowerEnclosureMgmtBoardSerialNum	DisplayString
	cpqRackPowerEnclosureRedundant	INTEGER
	cpqRackPowerEnclosureLoadBalanced	INTEGER
	cpqRackPowerEnclosureInputPwrType	INTEGER
	cpqRackPowerEnclosurePwrFeedMax	INTEGER
	cpqRackPowerEnclosureCondition	INTEGER
	cpqRackPowerEnclosureBladeAutopoweron	INTEGER

CpqRackServerBladeEntry
SEQUENCE
	cpqRackServerBladeRack	INTEGER
	cpqRackServerBladeChassis	INTEGER
	cpqRackServerBladeIndex	INTEGER
	cpqRackServerBladeName	DisplayString
	cpqRackServerBladeEnclosureName	DisplayString
	cpqRackServerBladePartNumber	DisplayString
	cpqRackServerBladeSparePartNumber	DisplayString
	cpqRackServerBladePosition	INTEGER
	cpqRackServerBladeHeight	INTEGER
	cpqRackServerBladeWidth	INTEGER
	cpqRackServerBladeDepth	INTEGER
	cpqRackServerBladePresent	INTEGER
	cpqRackServerBladeHasFuses	INTEGER
	cpqRackServerBladeEnclosureSerialNum	DisplayString
	cpqRackServerBladeSlotsUsed	INTEGER
	cpqRackServerBladeSerialNum	DisplayString
	cpqRackServerBladeProductId	DisplayString
	cpqRackServerBladeUid	DisplayString
	cpqRackServerBladeSlotsUsedX	INTEGER
	cpqRackServerBladeSlotsUsedY	INTEGER
	cpqRackServerBladeStatus	INTEGER
	cpqRackServerBladeFaultMajor	INTEGER
	cpqRackServerBladeFaultMinor	INTEGER
	cpqRackServerBladeFaultDiagnosticString	DisplayString
	cpqRackServerBladePowered	INTEGER
	cpqRackServerBladeUIDState	INTEGER
	cpqRackServerBladeSystemBIOSRevision	DisplayString
	cpqRackServerBladeSystemBIOSFlashingStatus	INTEGER
	cpqRackServerBladeHasManagementDevice	INTEGER
	cpqRackServerBladeManagementDeviceFirmwareRevision	DisplayString
	cpqRackServerBladeManagementDeviceFirmwareFlashingStatus	INTEGER
	cpqRackServerBladeDiagnosticAdaptorPresence	INTEGER
	cpqRackServerBladeASREnabled	INTEGER
	cpqRackServerBladeFrontIOBlankingModeStatus	INTEGER
	cpqRackServerBladePOSTStatus	INTEGER
	cpqRackServerBladePXEBootModeStatus	INTEGER
	cpqRackServerBladePendingBootOrderChange	INTEGER
	cpqRackServerBladeWattageMax	INTEGER
	cpqRackServerBladeWattageAvg	INTEGER
	cpqRackServerBladeWattageMin	INTEGER

CpqRackServerNetworkingEntry
SEQUENCE
	cpqRackServerNetworkingRack	INTEGER
	cpqRackServerNetworkingChassis	INTEGER
	cpqRackServerNetworkingIndex	INTEGER
	cpqRackServerNetworkingName	DisplayString
	cpqRackServerNetworkingEnclosureName	DisplayString
	cpqRackServerNetworkingEthernetInterfaces	INTEGER
	cpqRackServerNetworkingEthernetMACAddress	DisplayString

CpqRackServerTempSensorEntry
SEQUENCE
	cpqRackServerTempSensorRack	INTEGER
	cpqRackServerTempSensorChassis	INTEGER
	cpqRackServerTempSensorIndex	INTEGER
	cpqRackServerTempSensorName	DisplayString
	cpqRackServerTempSensorEnclosureName	DisplayString
	cpqRackServerTempSensorCount	INTEGER
	cpqRackServerTempSensorLocation	DisplayString
	cpqRackServerTempSensorCurrent	INTEGER
	cpqRackServerTempSensorThreshold	INTEGER
	cpqRackServerTempSensorCondition	INTEGER
	cpqRackServerTempSensorType	INTEGER

CpqRackPowerSupplyEntry
SEQUENCE
	cpqRackPowerSupplyRack	INTEGER
	cpqRackPowerSupplyChassis	INTEGER
	cpqRackPowerSupplyIndex	INTEGER
	cpqRackPowerSupplyEnclosureName	DisplayString
	cpqRackPowerSupplySerialNum	DisplayString
	cpqRackPowerSupplyPartNumber	DisplayString
	cpqRackPowerSupplySparePartNumber	DisplayString
	cpqRackPowerSupplyFWRev	DisplayString
	cpqRackPowerSupplyMaxPwrOutput	INTEGER
	cpqRackPowerSupplyCurPwrOutput	INTEGER
	cpqRackPowerSupplyPosition	INTEGER
	cpqRackPowerSupplyIntakeTemp	INTEGER
	cpqRackPowerSupplyExhaustTemp	INTEGER
	cpqRackPowerSupplyStatus	INTEGER
	cpqRackPowerSupplyInputLineStatus	INTEGER
	cpqRackPowerSupplyPresent	INTEGER
	cpqRackPowerSupplyCondition	INTEGER
	cpqRackPowerSupplyEnclosureSerialNum	DisplayString

CpqRackNetConnectorEntry
SEQUENCE
	cpqRackNetConnectorRack	INTEGER
	cpqRackNetConnectorChassis	INTEGER
	cpqRackNetConnectorIndex	INTEGER
	cpqRackNetConnectorEnclosureName	DisplayString
	cpqRackNetConnectorName	DisplayString
	cpqRackNetConnectorModel	DisplayString
	cpqRackNetConnectorSerialNum	DisplayString
	cpqRackNetConnectorPartNumber	DisplayString
	cpqRackNetConnectorSparePartNumber	DisplayString
	cpqRackNetConnectorFWRev	DisplayString
	cpqRackNetConnectorType	INTEGER
	cpqRackNetConnectorLocation	DisplayString
	cpqRackNetConnectorPresent	INTEGER
	cpqRackNetConnectorHasFuses	INTEGER
	cpqRackNetConnectorEnclosureSerialNum	DisplayString
	cpqRackNetConnectorTechnologyType	INTEGER
	cpqRackNetConnectorDeviceType	INTEGER

Defined Values

cpqRackInfo		1.3.6.1.4.1.232.22
OBJECT IDENTIFIER

cpqRackMibRev		1.3.6.1.4.1.232.22.1
OBJECT IDENTIFIER

cpqRackComponent		1.3.6.1.4.1.232.22.2
OBJECT IDENTIFIER

cpqRackSysObjID		1.3.6.1.4.1.232.22.3
OBJECT IDENTIFIER

cpqRackInterface		1.3.6.1.4.1.232.22.2.1
OBJECT IDENTIFIER

cpqRackAsset		1.3.6.1.4.1.232.22.2.2
OBJECT IDENTIFIER

cpqRackEnclosure		1.3.6.1.4.1.232.22.2.3
OBJECT IDENTIFIER

cpqRackServer		1.3.6.1.4.1.232.22.2.4
OBJECT IDENTIFIER

cpqRackPower		1.3.6.1.4.1.232.22.2.5
OBJECT IDENTIFIER

cpqRackNetwork		1.3.6.1.4.1.232.22.2.6
OBJECT IDENTIFIER

cpqRackOsCommon		1.3.6.1.4.1.232.22.2.1.4
OBJECT IDENTIFIER

cpqRackCommonEnclosure		1.3.6.1.4.1.232.22.2.3.1
OBJECT IDENTIFIER

cpqRackServerEnclosure		1.3.6.1.4.1.232.22.2.3.2
OBJECT IDENTIFIER

cpqRackPowerEnclosure		1.3.6.1.4.1.232.22.2.3.3
OBJECT IDENTIFIER

cpqRackServerBlade		1.3.6.1.4.1.232.22.2.4.1
OBJECT IDENTIFIER

cpqRackServerNetworking		1.3.6.1.4.1.232.22.2.4.2
OBJECT IDENTIFIER

cpqRackServerTempSensor		1.3.6.1.4.1.232.22.2.4.3
OBJECT IDENTIFIER

cpqRackPowerSupply		1.3.6.1.4.1.232.22.2.5.1
OBJECT IDENTIFIER

cpqRackNetConnector		1.3.6.1.4.1.232.22.2.6.1
OBJECT IDENTIFIER

cpqRackMibRevMajor		1.3.6.1.4.1.232.22.1.1
The major revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

cpqRackMibRevMinor		1.3.6.1.4.1.232.22.1.2
The minor revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

cpqRackMibCondition		1.3.6.1.4.1.232.22.1.3
The overall condition. This object represents the overall status of the rack information represented by this MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackOsCommonPollFreq		1.3.6.1.4.1.232.22.2.1.4.1
The Management Agent's polling frequency. The frequency, in seconds, at which the Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

cpqRackAssetTable		1.3.6.1.4.1.232.22.2.2.1
A table of rack asset information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackAssetEntry

cpqRackAssetEntry		1.3.6.1.4.1.232.22.2.2.1.1
A rack asset description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackAssetEntry

cpqRackAssetIndex		1.3.6.1.4.1.232.22.2.2.1.1.1
A number that uniquely specifies this rack table entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackName		1.3.6.1.4.1.232.22.2.2.1.1.2
The customer changeable identifier used to identify the entire rack. The string will be empty if the system does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackUid		1.3.6.1.4.1.232.22.2.2.1.1.3
The rack unique identifier. The string will be empty if the rack does not report the UID or if it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackSerialNum		1.3.6.1.4.1.232.22.2.2.1.1.4
The rack serial number. The string will be empty if the rack does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackTrapSequenceNum		1.3.6.1.4.1.232.22.2.2.1.1.5
The trap sequence number for rack traps. This is used by the management application trap processing. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackHeight		1.3.6.1.4.1.232.22.2.2.1.1.6
The internal height dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackWidth		1.3.6.1.4.1.232.22.2.2.1.1.7
The internal width dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackDepth		1.3.6.1.4.1.232.22.2.2.1.1.8
The internal depth dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTable		1.3.6.1.4.1.232.22.2.3.1.1
A table of rack enclosure information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureEntry

cpqRackCommonEnclosureEntry		1.3.6.1.4.1.232.22.2.3.1.1.1
A rack enclosure description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureEntry

cpqRackCommonEnclosureRack		1.3.6.1.4.1.232.22.2.3.1.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureIndex		1.3.6.1.4.1.232.22.2.3.1.1.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureModel		1.3.6.1.4.1.232.22.2.3.1.1.1.3
The model name of the enclosure. The string will be empty if the enclosure does not report the model information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureAssetTag		1.3.6.1.4.1.232.22.2.3.1.1.1.4
The customer changeable asset identifier of the enclosure. The string will be empty if the system does not report this function or if the asset tag has not been set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosurePartNumber		1.3.6.1.4.1.232.22.2.3.1.1.1.5
The part number of the enclosure. The string will be empty if the enclosure does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureSparePartNumber		1.3.6.1.4.1.232.22.2.3.1.1.1.6
The spare part number of the enclosure. The string will be empty if the enclosure does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureSerialNum		1.3.6.1.4.1.232.22.2.3.1.1.1.7
The serial number of the enclosure. The string will be empty if the enclosure does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFWRev		1.3.6.1.4.1.232.22.2.3.1.1.1.8
The firmware revision of the enclosure. The string will be empty if the enclosure does not report the firmware revision or does not contain firmware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureName		1.3.6.1.4.1.232.22.2.3.1.1.1.9
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureNeighborNamePrev		1.3.6.1.4.1.232.22.2.3.1.1.1.10
The name of the enclosure immediately preceding or above this enclosure. The string will be empty if the neighbor enclosure name could not be determined or there is no enclosure preceding this one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureNeighborNameNext		1.3.6.1.4.1.232.22.2.3.1.1.1.11
The name of the enclosure immediately following or below this enclosure. The string will be empty if the neighbor enclosure name could not be determined or there is no enclosure following this one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureHeight		1.3.6.1.4.1.232.22.2.3.1.1.1.12
The height dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureWidth		1.3.6.1.4.1.232.22.2.3.1.1.1.13
The width dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureDepth		1.3.6.1.4.1.232.22.2.3.1.1.1.14
The depth dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTrapSequenceNum		1.3.6.1.4.1.232.22.2.3.1.1.1.15
The trap sequence number for the enclosure. This is used by the management application trap processing. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureCondition		1.3.6.1.4.1.232.22.2.3.1.1.1.16
The overall condition of the enclosure. This is the aggregate of the temperature sensors, fans, and fuses within the enclosure. This value will be one of the following: other(1) No temperature sensors, fans, or fuses in the enclosure or the state could no be determined. ok(2) All temperature sensors, fans, and fuses are within the normal operating range. degraded(3) One or more temperature sensors, fans, or fuses are outside of the normal operating range. None are failed. failed(4) The temperature sensor exceeded the critical threshold value, a required fan has failed, or a fuse has been tripped. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackCommonEnclosureHasServerBlades		1.3.6.1.4.1.232.22.2.3.1.1.1.17
The enclosure can contain server blades. This will be true(2) is the enclosure can house server blades. The cpqRackServerEnclosureTable will contain server enclosure specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackServerEnclosureTable to get complete information on the server enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureHasPowerSupplies		1.3.6.1.4.1.232.22.2.3.1.1.1.18
The enclosure can contain power supplies. This will be true(2) is the enclosure can house power supplies. The cpqRackEnclosurePowerTable will contain power enclosure specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackEnclosurePowerTable to get complete information on the power enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureHasNetConnectors		1.3.6.1.4.1.232.22.2.3.1.1.1.19
The enclosure contains network connectivity. This will be true(2) is the enclosure contains network connectivity. The cpqRackCommonEnclosureNetConnectorTable will contain network connectivity specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureNetConnectorTable to get complete information on the network connector enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureHasTempSensors		1.3.6.1.4.1.232.22.2.3.1.1.1.20
The enclosure contains temperature sensors. This will be true(2) is the enclosure contains temperature sensors. The cpqRackCommonEnclosureTempTable will contain temperature sensor specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureTempTable to get complete information on the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureHasFans		1.3.6.1.4.1.232.22.2.3.1.1.1.21
The enclosure contains fans. This will be true(2) is the enclosure contains fans. The cpqRackCommonEnclosureFanTable will contain the fan specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFanTable to get complete information on the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureHasFuses		1.3.6.1.4.1.232.22.2.3.1.1.1.22
The enclosure contains fuses. This will be true(2) is the enclosure contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFuseTable to get complete information on the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureMgmtUID		1.3.6.1.4.1.232.22.2.3.1.1.1.23
The Unit Identifier LED. This value will be one of the following: other(1) The state of the LED could not be determined. Setting the LED state is not allowed. none(2) The LED is not present. Setting LED state is not allowed. ledOn(3) The LED is present and ON. The LED can be turned off by setting the cpqRackCommonEnclosureMgmtUID to ledOff(4). ledOff(4) The LED is present and OFF. The LED can be turned on by setting the cpqRackCommonEnclosureMgmtUID to ledOn(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), none(2), ledOn(3), ledOff(4)

cpqRackCommonEnclosureSerialNumPrev		1.3.6.1.4.1.232.22.2.3.1.1.1.24
The serial number of the enclosure immediately preceding or above this enclosure. The string will be empty if the neighbor enclosure serial number could not be determined or there is no enclosure preceding this one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureSerialNumNext		1.3.6.1.4.1.232.22.2.3.1.1.1.25
The serial number of the enclosure immediately following or below this enclosure. The string will be empty if the neighbor enclosure serial number could not be determined or there is no enclosure following this one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureAddress		1.3.6.1.4.1.232.22.2.3.1.1.1.26
The unique address of the enclosure within the rack. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureProductId		1.3.6.1.4.1.232.22.2.3.1.1.1.27
The product id string of the enclosure. The string will be empty if the enclosure does not report the product id string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureProductIdPrev		1.3.6.1.4.1.232.22.2.3.1.1.1.28
The product id string of the enclosure immediately preceding or above this enclosure. The string will be empty if the enclosure does not report the product id string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureProductIdNext		1.3.6.1.4.1.232.22.2.3.1.1.1.29
The product id string of the enclosure immediately following or below this enclosure. The string will be empty if the enclosure does not report the product id string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureUUID		1.3.6.1.4.1.232.22.2.3.1.1.1.30
The universal unique identifier string of the enclosure. The string will be empty if the enclosure does not report the UUID string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureUUIDPrev		1.3.6.1.4.1.232.22.2.3.1.1.1.31
The universal unique identifier string of the enclosure immediately preceding or above this enclosure. The string will be empty if the enclosure does not report the UUID string or if there is no preceding enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureUUIDNext		1.3.6.1.4.1.232.22.2.3.1.1.1.32
The universal unique identifier string of the enclosure immediately following or below this enclosure. The string will be empty if the enclosure does not report the UUID string or if there is no following enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureHasManagers		1.3.6.1.4.1.232.22.2.3.1.1.1.33
The enclosure contains managers. This will be true(2) is the enclosure contains managers. The cpqRackCommonEnclosureManagerTable will contain the manager specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureManagerTable to get complete information on the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackCommonEnclosureTempTable		1.3.6.1.4.1.232.22.2.3.1.2
A table of rack enclosure temperature sensor information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureTempEntry

cpqRackCommonEnclosureTempEntry		1.3.6.1.4.1.232.22.2.3.1.2.1
A rack enclosure temperature sensor description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureTempEntry

cpqRackCommonEnclosureTempRack		1.3.6.1.4.1.232.22.2.3.1.2.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTempChassis		1.3.6.1.4.1.232.22.2.3.1.2.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTempSensorIndex		1.3.6.1.4.1.232.22.2.3.1.2.1.3
A number that uniquely specifies this temperature sensor within this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTempSensorEnclosureName		1.3.6.1.4.1.232.22.2.3.1.2.1.4
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureTempLocation		1.3.6.1.4.1.232.22.2.3.1.2.1.5
The location description of the temperature sensor within the enclosure. The string will be empty if the location could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureTempCurrent		1.3.6.1.4.1.232.22.2.3.1.2.1.6
This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTempThreshold		1.3.6.1.4.1.232.22.2.3.1.2.1.7
This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackCommonEnclosureTempType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the enclosure will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureTempCondition		1.3.6.1.4.1.232.22.2.3.1.2.1.8
The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within the normal operating range. degraded(3) The temperature sensor is outside of the normal operating range. failed(4) The temperature sensor detects a condition that could possibly damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackCommonEnclosureTempType		1.3.6.1.4.1.232.22.2.3.1.2.1.9
This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqRackCommonEnclosureTempCondition will be set to degraded(3) and the system will either continue or shutdown depending on the user preferences. critical(15) If a critical(15) temperature sensor reaches its threshold, the cpqHeTemperatureCondition will be set to failed(4) and the system will shutdown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), blowout(5), caution(9), critical(15)

cpqRackCommonEnclosureTempSensorEnclosureSerialNum		1.3.6.1.4.1.232.22.2.3.1.2.1.10
The serial number of the enclosure containing this temperature sensor. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFanTable		1.3.6.1.4.1.232.22.2.3.1.3
A table of rack enclosure fan information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureFanEntry

cpqRackCommonEnclosureFanEntry		1.3.6.1.4.1.232.22.2.3.1.3.1
A rack enclosure fan description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureFanEntry

cpqRackCommonEnclosureFanRack		1.3.6.1.4.1.232.22.2.3.1.3.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFanChassis		1.3.6.1.4.1.232.22.2.3.1.3.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFanIndex		1.3.6.1.4.1.232.22.2.3.1.3.1.3
A number that uniquely specifies this fan within this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFanEnclosureName		1.3.6.1.4.1.232.22.2.3.1.3.1.4
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFanLocation		1.3.6.1.4.1.232.22.2.3.1.3.1.5
The location description of the fan within the enclosure. The string will be empty if the location could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFanPartNumber		1.3.6.1.4.1.232.22.2.3.1.3.1.6
The part number of the enclosure fan. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFanSparePartNumber		1.3.6.1.4.1.232.22.2.3.1.3.1.7
The spare part number of the enclosure fan. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFanPresent		1.3.6.1.4.1.232.22.2.3.1.3.1.8
This specifies if the fan described is present in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackCommonEnclosureFanRedundant		1.3.6.1.4.1.232.22.2.3.1.3.1.9
This specifies if the fan is in a redundant configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), notRedundant(2), redundant(3)

cpqRackCommonEnclosureFanRedundantGroupId		1.3.6.1.4.1.232.22.2.3.1.3.1.10
This specifies the group number for redundant fans within this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFanCondition		1.3.6.1.4.1.232.22.2.3.1.3.1.11
The condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported. ok(2) The fan is operating properly. degraded(2) A redundant fan is not operating properly. failed(4) A non-redundant fan is not operating properly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackCommonEnclosureFanEnclosureSerialNum		1.3.6.1.4.1.232.22.2.3.1.3.1.12
The serial number of the enclosure containing the fan. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFuseTable		1.3.6.1.4.1.232.22.2.3.1.4
A table of rack enclosure fuse information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureFuseEntry

cpqRackCommonEnclosureFuseEntry		1.3.6.1.4.1.232.22.2.3.1.4.1
A rack enclosure fuse description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureFuseEntry

cpqRackCommonEnclosureFuseRack		1.3.6.1.4.1.232.22.2.3.1.4.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFuseChassis		1.3.6.1.4.1.232.22.2.3.1.4.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFuseIndex		1.3.6.1.4.1.232.22.2.3.1.4.1.3
A number that uniquely specifies the fuse within this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFuseEnclosureName		1.3.6.1.4.1.232.22.2.3.1.4.1.4
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFuseLocation		1.3.6.1.4.1.232.22.2.3.1.4.1.5
The location description of the fuse within the enclosure. The string will be empty if the location could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFusePresent		1.3.6.1.4.1.232.22.2.3.1.4.1.6
This specifies if the fuse described is present in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackCommonEnclosureFuseCondition		1.3.6.1.4.1.232.22.2.3.1.4.1.7
The condition of the fuse. This value will be one of the following: other(1) Fuse status detection is not supported. ok(2) The fuse is operating properly. failed(4) A fuse has been tripped or is not operating properly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), failed(4)

cpqRackCommonEnclosureFruTable		1.3.6.1.4.1.232.22.2.3.1.5
A table of rack enclosure field replaceable units information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureFruEntry

cpqRackCommonEnclosureFruEntry		1.3.6.1.4.1.232.22.2.3.1.5.1
A rack enclosure field replaceable unit description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureFruEntry

cpqRackCommonEnclosureFruRack		1.3.6.1.4.1.232.22.2.3.1.5.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFruChassis		1.3.6.1.4.1.232.22.2.3.1.5.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFruIndex		1.3.6.1.4.1.232.22.2.3.1.5.1.3
A number that uniquely specifies the FRU within this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureFruEnclosureName		1.3.6.1.4.1.232.22.2.3.1.5.1.4
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruDescription		1.3.6.1.4.1.232.22.2.3.1.5.1.5
A description of the FRU component. The string will be empty if the enclosure does not report the description information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruLocation		1.3.6.1.4.1.232.22.2.3.1.5.1.6
The location description of the FRU within the enclosure. The string will be empty if the location could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruAssemblyPartNumber		1.3.6.1.4.1.232.22.2.3.1.5.1.7
The assembly part number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruSparePartNumber		1.3.6.1.4.1.232.22.2.3.1.5.1.8
The spare part number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruAutoRev		1.3.6.1.4.1.232.22.2.3.1.5.1.9
The auto revision number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureFruSerialNum		1.3.6.1.4.1.232.22.2.3.1.5.1.10
The serial number of the FRU within the enclosure. The string will be empty if the enclosure does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerTable		1.3.6.1.4.1.232.22.2.3.1.6
A table of rack enclosure manager information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackCommonEnclosureManagerEntry

cpqRackCommonEnclosureManagerEntry		1.3.6.1.4.1.232.22.2.3.1.6.1
A rack enclosure manager description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackCommonEnclosureManagerEntry

cpqRackCommonEnclosureManagerRack		1.3.6.1.4.1.232.22.2.3.1.6.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureManagerChassis		1.3.6.1.4.1.232.22.2.3.1.6.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureManagerIndex		1.3.6.1.4.1.232.22.2.3.1.6.1.3
A number that uniquely specifies this manager within this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackCommonEnclosureManagerEnclosureName		1.3.6.1.4.1.232.22.2.3.1.6.1.4
The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerLocation		1.3.6.1.4.1.232.22.2.3.1.6.1.5
The location description of the manager within the enclosure. The string will be empty if the location could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerPartNumber		1.3.6.1.4.1.232.22.2.3.1.6.1.6
The part number of the enclosure manager. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerSparePartNumber		1.3.6.1.4.1.232.22.2.3.1.6.1.7
The spare part number of the enclosure manager. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerSerialNum		1.3.6.1.4.1.232.22.2.3.1.6.1.8
The serial number of the enclosure manager. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerRole		1.3.6.1.4.1.232.22.2.3.1.6.1.9
This specifies the current role of the manager.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	standby(1), active(2)

cpqRackCommonEnclosureManagerPresent		1.3.6.1.4.1.232.22.2.3.1.6.1.10
This specifies if the manager described is present in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackCommonEnclosureManagerRedundant		1.3.6.1.4.1.232.22.2.3.1.6.1.11
This specifies if the manager is in a redundant configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), notRedundant(2), redundant(3)

cpqRackCommonEnclosureManagerCondition		1.3.6.1.4.1.232.22.2.3.1.6.1.12
The condition of the manager. This value will be one of the following: other(1) Manager status detection is not supported. ok(2) The manager is operating properly. degraded(2) A redundant manager is not operating properly. failed(4) A non-redundant manager is not operating properly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackCommonEnclosureManagerEnclosureSerialNum		1.3.6.1.4.1.232.22.2.3.1.6.1.13
The serial number of the enclosure containing the manager. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerUUID		1.3.6.1.4.1.232.22.2.3.1.6.1.14
The universal unique identifier string of the manager. The string will be empty if the enclosure does not report the UUID string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackCommonEnclosureManagerFWRev		1.3.6.1.4.1.232.22.2.3.1.6.1.15
The firmware revision of the enclosure manager. The string will be empty if the enclosure does not report the firmware revision or does not contain firmware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerEnclosureTable		1.3.6.1.4.1.232.22.2.3.2.1
A table of rack enclosure information for servers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackServerEnclosureEntry

cpqRackServerEnclosureEntry		1.3.6.1.4.1.232.22.2.3.2.1.1
A server enclosure description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackServerEnclosureEntry

cpqRackServerEnclosureRack		1.3.6.1.4.1.232.22.2.3.2.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerEnclosureIndex		1.3.6.1.4.1.232.22.2.3.2.1.1.2
A number that uniquely specifies this server enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerEnclosureName		1.3.6.1.4.1.232.22.2.3.2.1.1.3
The name of the server enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerEnclosureMaxNumBlades		1.3.6.1.4.1.232.22.2.3.2.1.1.4
The maximum number of server blades the enclosure can contain. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerEnclosureMaxNumBladesX		1.3.6.1.4.1.232.22.2.3.2.1.1.5
The maximum number of server blades in x-direction (from left to right) the enclosure can contain.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerEnclosureMaxNumBladesY		1.3.6.1.4.1.232.22.2.3.2.1.1.6
The maximum number of server blades in y-direction (from top to bottom) the enclosure can contain.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerEnclosureTable		1.3.6.1.4.1.232.22.2.3.3.1
A table of rack power enclosure information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackPowerEnclosureEntry

cpqRackPowerEnclosureEntry		1.3.6.1.4.1.232.22.2.3.3.1.1
A rack power enclosure description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackPowerEnclosureEntry

cpqRackPowerEnclosureRack		1.3.6.1.4.1.232.22.2.3.3.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerEnclosureIndex		1.3.6.1.4.1.232.22.2.3.3.1.1.2
A number that uniquely specifies this power enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerEnclosureName		1.3.6.1.4.1.232.22.2.3.3.1.1.3
The name of the power enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerEnclosureMgmtBoardSerialNum		1.3.6.1.4.1.232.22.2.3.3.1.1.4
The serial number of the enclosure. The string will be empty if the enclosure does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerEnclosureRedundant		1.3.6.1.4.1.232.22.2.3.3.1.1.5
This indicates if the power supply enclosure is in a redundant state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), notRedundant(2), redundant(3)

cpqRackPowerEnclosureLoadBalanced		1.3.6.1.4.1.232.22.2.3.3.1.1.6
This indicates if the power supply enclosure is in a load balanced state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), notLoadBalanced(2), loadBalanced(3)

cpqRackPowerEnclosureInputPwrType		1.3.6.1.4.1.232.22.2.3.3.1.1.7
This indicates type of input facility power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), singlePhase(2), threePhase(3), directCurrent(4)

cpqRackPowerEnclosurePwrFeedMax		1.3.6.1.4.1.232.22.2.3.3.1.1.8
This is the maximum facility power in watts. The maximum facility power being fed to this power enclosure. The value will be -1 if the power enclosure does not report the value or if the value is not known.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerEnclosureCondition		1.3.6.1.4.1.232.22.2.3.3.1.1.9
This indicates current condition of the power enclosure. other(1) The power enclosure condition could not be determined. ok(2) The power enclosure is operating normally. degraded(3) The power enclosure is in a degraded state. The power subsystem may not be load balanced or may have lost redundancy.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3)

cpqRackPowerEnclosureBladeAutopoweron		1.3.6.1.4.1.232.22.2.3.3.1.1.10
This indicates current condition of the power enclosure. other(1) The blade auto power on feature could not be determined. disabled(2) The enclosure will not automatically power on a blade when inserted. enabled(3) The enclosure will automatically power on a blade when inserted.
Status: optional	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

cpqRackLastEAEEvent		1.3.6.1.4.1.232.22.2.3.2.2
Data for the last EAE event.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..512)

cpqRackServerBladeTable		1.3.6.1.4.1.232.22.2.4.1.1
A table of rack server blade information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackServerBladeEntry

cpqRackServerBladeEntry		1.3.6.1.4.1.232.22.2.4.1.1.1
A rack server blade description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackServerBladeEntry

cpqRackServerBladeRack		1.3.6.1.4.1.232.22.2.4.1.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeChassis		1.3.6.1.4.1.232.22.2.4.1.1.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeIndex		1.3.6.1.4.1.232.22.2.4.1.1.1.3
A number that uniquely specifies this server blade within the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeName		1.3.6.1.4.1.232.22.2.4.1.1.1.4
The name of the server blade. The string will be empty if it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeEnclosureName		1.3.6.1.4.1.232.22.2.4.1.1.1.5
The name of the enclosure which contains the blade. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladePartNumber		1.3.6.1.4.1.232.22.2.4.1.1.1.6
The part number of the server blade. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeSparePartNumber		1.3.6.1.4.1.232.22.2.4.1.1.1.7
The spare part number of the server blade. The string will be empty if the part number could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladePosition		1.3.6.1.4.1.232.22.2.4.1.1.1.8
The position or slot number of the server blade within the server enclosure. This will be -1 if the server enclosure does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeHeight		1.3.6.1.4.1.232.22.2.4.1.1.1.9
The height dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeWidth		1.3.6.1.4.1.232.22.2.4.1.1.1.10
The width dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeDepth		1.3.6.1.4.1.232.22.2.4.1.1.1.11
The depth dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladePresent		1.3.6.1.4.1.232.22.2.4.1.1.1.12
This specifies if the server blade described is present in the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackServerBladeHasFuses		1.3.6.1.4.1.232.22.2.4.1.1.1.13
The server blade contains fuses. This will be true(2) is the server blade contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackServerBladeEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFanTable to get complete information on the fuses.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackServerBladeEnclosureSerialNum		1.3.6.1.4.1.232.22.2.4.1.1.1.14
The serial number of the enclosure which contains the blade. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeSlotsUsed		1.3.6.1.4.1.232.22.2.4.1.1.1.15
The number of slot positions occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeSerialNum		1.3.6.1.4.1.232.22.2.4.1.1.1.16
The serial number of the server blade. The string will be empty if the system does not report the serial number function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeProductId		1.3.6.1.4.1.232.22.2.4.1.1.1.17
The product id string of the server blade. The string will be empty if the system does not report the product id function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeUid		1.3.6.1.4.1.232.22.2.4.1.1.1.18
The server blade unique identifier (UUID). The string will be empty if the blade does not report the UUID or if it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeSlotsUsedX		1.3.6.1.4.1.232.22.2.4.1.1.1.19
The number of slot positions in x-direction (from left to right) occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeSlotsUsedY		1.3.6.1.4.1.232.22.2.4.1.1.1.20
The number of slot positions in y-direction (from top to bottom) occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.21
The health status of the blade. This will be other(1) if the rack does not report the information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackServerBladeFaultMajor		1.3.6.1.4.1.232.22.2.4.1.1.1.22
The major fault code of the blade fault reported by the enclosure manager. This will be -1 if the rack does not report the information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeFaultMinor		1.3.6.1.4.1.232.22.2.4.1.1.1.23
The minor fault code of the blade fault reported by the enclosure manager. This will be -1 if the rack does not report the information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeFaultDiagnosticString		1.3.6.1.4.1.232.22.2.4.1.1.1.24
The server blade fault diagnostic string. This will contain a probable cause and potential diagnostic action to be taken to remedy the fault condition. The string will be empty if the blade does not report the diagnostic string or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

cpqRackServerBladePowered		1.3.6.1.4.1.232.22.2.4.1.1.1.25
The power state of the blade. This will be other(1) if the rack does not report the information or if it could not be determined.
Status: optional	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), on(2), off(3), powerStagedOff(4), reboot(5)

cpqRackServerBladeUIDState		1.3.6.1.4.1.232.22.2.4.1.1.1.26
The Unit Identifier LED. This value will be one of the following: other(1) The state of the LED could not be determined. Setting the LED state is not allowed. none(2) The LED is not present. Setting LED state is not allowed. ledOn(3) The LED is present and ON. The LED can be turned off by setting the cpqRackServerBladeUIDState to ledOff(4). ledOff(4) The LED is present and OFF. The LED can be turned on by setting the cpqRackServerBladeUIDState to ledOn(3).
Status: optional	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), none(2), ledOn(3), ledOff(4)

cpqRackServerBladeSystemBIOSRevision		1.3.6.1.4.1.232.22.2.4.1.1.1.27
The server blade system bios revision. The string will be empty if the blade does not report the system bios revision or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeSystemBIOSFlashingStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.28
Blade server system BIOS flashing / flash mode status indication. This will be other(1) if the rack does not report the information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), normal(2), flashing(3)

cpqRackServerBladeHasManagementDevice		1.3.6.1.4.1.232.22.2.4.1.1.1.29
The blade server contains one or more management devices. This will be true(2) if the blade server contains managers and false (1) if not or if it can't be detected.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackServerBladeManagementDeviceFirmwareRevision		1.3.6.1.4.1.232.22.2.4.1.1.1.30
The server blade management device firwmware revision. The string will be empty if the blade does not report the management device firwmware revision or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerBladeManagementDeviceFirmwareFlashingStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.31
Blade server management device firwmware flashing / flash mode status indication. This will be other(1) if the rack does not report this information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), normal(2), flashing(3)

cpqRackServerBladeDiagnosticAdaptorPresence		1.3.6.1.4.1.232.22.2.4.1.1.1.32
This specifies if a blade diagnostic adaptor is currently plugged into the system.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackServerBladeASREnabled		1.3.6.1.4.1.232.22.2.4.1.1.1.33
Indicates whether the target blade server has Automatic Service Recovery feature enabled. This will be true(2) if the blade server has this feature eanbled and false (1) if not or if it can't be detected.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackServerBladeFrontIOBlankingModeStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.34
Indicates whether the target blade server has the front IO ports blanking feature enabled. This will be Active(3) if the blade server has this feature eanbled, Inactive (2) if not, or Unknown(1) if it can't be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), inactive(2), active(3)

cpqRackServerBladePOSTStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.35
Blade server power-on self test (POST) status. This value will be one of the following: other(1) The state of the blade POST could not be determined. started(2) Blade has started Power-on-self-test (POST) process. completed(3) Blade has finished Power-on-self-test (POST) process. failed(4) Blade has failed to complete Power-on-self-test (POST) process and halted. This will be other(1) if the rack does not report this information or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), started(2), completed(3), failed(4)

cpqRackServerBladePXEBootModeStatus		1.3.6.1.4.1.232.22.2.4.1.1.1.36
Indicates whether the target blade server is in PXE boot mode. This will be Active(3) if the blade server has this feature enbled, Inactive (2) if not, or Unknown(1) if it can't be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), inactive(2), active(3)

cpqRackServerBladePendingBootOrderChange		1.3.6.1.4.1.232.22.2.4.1.1.1.37
Blade server pending boot order setting change state. This value will be one of the following: other(1) - Unknown or cannot be determined none(2) - No Changes firstPXE(3) - Boot To Pre-Boot eXecution (PXE) First firstHDD(4) - First Boot To Local HD firstRBSU(5) - First Boot To ROM Based Setup Utility oncePXE(6) - Boot To Pre-Boot eXecution (PXE) Once onceHDD(7) - Boot To Local HD Once onceRBSU(8) - Boot To ROM Based Setup Utility Once alwaysPXE(9) - Always Boot To Pre-Boot eXecution (PXE) alwaysHDD(10) - Always Boot To Local HD alwaysRBSU(11) - Always Boot To ROM Based Setup Utility This will be other(1) if the rack does not report this information or if it could not be determined.
Status: optional	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), none(2), firstPXE(3), firstHDD(4), firstRBSU(5), oncePXE(6), onceHDD(7), onceRBSU(8), alwaysPXE(9), alwaysHDD(10), alwaysRBSU(11)

cpqRackServerBladeWattageMax		1.3.6.1.4.1.232.22.2.4.1.1.1.38
Maximum wattage the server has consumed during this power cycle.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeWattageAvg		1.3.6.1.4.1.232.22.2.4.1.1.1.39
Average wattage the server is consuming, averaged over a period defined by the product.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerBladeWattageMin		1.3.6.1.4.1.232.22.2.4.1.1.1.40
Minimum wattage the server has consumed, computed from a period defined by the product. Value will be 0 if not supported, but other wattage values are supported.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerNetworkingTable		1.3.6.1.4.1.232.22.2.4.2.1
A table of rack server networking information.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackServerNetworkingEntry

cpqRackServerNetworkingEntry		1.3.6.1.4.1.232.22.2.4.2.1.1
A rack server networking description.
Status: optional	Access: not-accessible
OBJECT-TYPE
	CpqRackServerNetworkingEntry

cpqRackServerNetworkingRack		1.3.6.1.4.1.232.22.2.4.2.1.1.1
A number that uniquely specifies this rack.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerNetworkingChassis		1.3.6.1.4.1.232.22.2.4.2.1.1.2
A number that uniquely specifies this enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerNetworkingIndex		1.3.6.1.4.1.232.22.2.4.2.1.1.3
A number that uniquely specifies this server within the enclosure.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerNetworkingName		1.3.6.1.4.1.232.22.2.4.2.1.1.4
The name of the server. The string will be empty if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerNetworkingEnclosureName		1.3.6.1.4.1.232.22.2.4.2.1.1.5
The name of the enclosure which contains the server. The string will be empty if the enclosure does not report the name or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerNetworkingEthernetInterfaces		1.3.6.1.4.1.232.22.2.4.2.1.1.6
A number that specifies the amount of Ethernet network interfaces in the server.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerNetworkingEthernetMACAddress		1.3.6.1.4.1.232.22.2.4.2.1.1.7
The MAC address for the Ethernet NIC populated in the server. The string will be empty if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerTempSensorTable		1.3.6.1.4.1.232.22.2.4.3.1
A table of rack server temperature sensor information.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackServerTempSensorEntry

cpqRackServerTempSensorEntry		1.3.6.1.4.1.232.22.2.4.3.1.1
A rack server temperature sensor description.
Status: optional	Access: not-accessible
OBJECT-TYPE
	CpqRackServerTempSensorEntry

cpqRackServerTempSensorRack		1.3.6.1.4.1.232.22.2.4.3.1.1.1
A number that uniquely specifies this rack.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorChassis		1.3.6.1.4.1.232.22.2.4.3.1.1.2
A number that uniquely specifies this enclosure in the rack.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorIndex		1.3.6.1.4.1.232.22.2.4.3.1.1.3
A number that uniquely specifies this server within the enclosure.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorName		1.3.6.1.4.1.232.22.2.4.3.1.1.4
The name of the server. The string will be empty if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerTempSensorEnclosureName		1.3.6.1.4.1.232.22.2.4.3.1.1.5
The name of the enclosure which contains the server. The string will be empty if the enclosure does not report the name or if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerTempSensorCount		1.3.6.1.4.1.232.22.2.4.3.1.1.6
A number that specifies the amount of temperature sensors in the server.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorLocation		1.3.6.1.4.1.232.22.2.4.3.1.1.7
The location description of the temperature sensor within the blade server. The string will be empty if it could not be determined.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackServerTempSensorCurrent		1.3.6.1.4.1.232.22.2.4.3.1.1.8
This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorThreshold		1.3.6.1.4.1.232.22.2.4.3.1.1.9
This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackServerTempSensorType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the enclosure will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackServerTempSensorCondition		1.3.6.1.4.1.232.22.2.4.3.1.1.10
The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within the normal operating range. degraded(3) The temperature sensor is outside of the normal operating range. failed(4) The temperature sensor detects a condition that could possibly overheat the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackServerTempSensorType		1.3.6.1.4.1.232.22.2.4.3.1.1.11
This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqRackServerTempSensorCondition will be set to degraded(3) and the system will either continue or shutdown depending on the local blade server policy settings. critical(15) If a critical(15) temperature sensor reaches its threshold, cpqRackServerTempSensorCondition will be set to failed(4) and the blade server will shutdown.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), blowout(5), caution(9), critical(15)

cpqRackPowerSupplyTable		1.3.6.1.4.1.232.22.2.5.1.1
A table of rack power supply information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackPowerSupplyEntry

cpqRackPowerSupplyEntry		1.3.6.1.4.1.232.22.2.5.1.1.1
A rack power supply description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackPowerSupplyEntry

cpqRackPowerSupplyRack		1.3.6.1.4.1.232.22.2.5.1.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyChassis		1.3.6.1.4.1.232.22.2.5.1.1.1.2
A number that uniquely specifies this power enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyIndex		1.3.6.1.4.1.232.22.2.5.1.1.1.3
A number that uniquely specifies this power supply in the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyEnclosureName		1.3.6.1.4.1.232.22.2.5.1.1.1.4
The name of the power supply enclosure in which this power supply resides. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerSupplySerialNum		1.3.6.1.4.1.232.22.2.5.1.1.1.5
The serial number of the power supply. The string will be empty if the power supply does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerSupplyPartNumber		1.3.6.1.4.1.232.22.2.5.1.1.1.6
The part number of the power supply. The string will be empty if the power supply does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerSupplySparePartNumber		1.3.6.1.4.1.232.22.2.5.1.1.1.7
The spare part number of the power supply. The string will be empty if the power supply does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerSupplyFWRev		1.3.6.1.4.1.232.22.2.5.1.1.1.8
The firmware revision of the power supply. The string will be empty if the power supply does not report the firmware revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackPowerSupplyMaxPwrOutput		1.3.6.1.4.1.232.22.2.5.1.1.1.9
The maximum power output of the power supply in watts. The value will be -1 if the power supply does not report the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyCurPwrOutput		1.3.6.1.4.1.232.22.2.5.1.1.1.10
The current power output of the power supply in watts. The value will be -1 if the power supply does not report the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyPosition		1.3.6.1.4.1.232.22.2.5.1.1.1.11
The position of the power supply within the power enclosure. This will be -1 if the power enclosure does not report the power supply information or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyIntakeTemp		1.3.6.1.4.1.232.22.2.5.1.1.1.12
The current air temperature at the intake of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyExhaustTemp		1.3.6.1.4.1.232.22.2.5.1.1.1.13
The current air temperature at the exhaust of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackPowerSupplyStatus		1.3.6.1.4.1.232.22.2.5.1.1.1.14
The status of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), generalFailure(2), bistFailure(3), fanFailure(4), tempFailure(5), interlockOpen(6), epromFailed(7), vrefFailed(8), dacFailed(9), ramTestFailed(10), voltageChannelFailed(11), orringdiodeFailed(12), brownOut(13), giveupOnStartup(14), nvramInvalid(15), calibrationTableInvalid(16)

cpqRackPowerSupplyInputLineStatus		1.3.6.1.4.1.232.22.2.5.1.1.1.15
The status of line input power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), lineOverVoltage(2), lineUnderVoltage(3), lineHit(4), brownOut(5), linePowerLoss(6)

cpqRackPowerSupplyPresent		1.3.6.1.4.1.232.22.2.5.1.1.1.16
This specifies if the power supply described is present in the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackPowerSupplyCondition		1.3.6.1.4.1.232.22.2.5.1.1.1.17
The condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply is operating normally. degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range. failed(4) A power supply component detects a condition that could possibly damage the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ok(2), degraded(3), failed(4)

cpqRackPowerSupplyEnclosureSerialNum		1.3.6.1.4.1.232.22.2.5.1.1.1.18
The serial number of the power supply enclosure in which this power supply resides. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorTable		1.3.6.1.4.1.232.22.2.6.1.1
A table of rack network connector information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpqRackNetConnectorEntry

cpqRackNetConnectorEntry		1.3.6.1.4.1.232.22.2.6.1.1.1
A rack network connector description.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpqRackNetConnectorEntry

cpqRackNetConnectorRack		1.3.6.1.4.1.232.22.2.6.1.1.1.1
A number that uniquely specifies this rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackNetConnectorChassis		1.3.6.1.4.1.232.22.2.6.1.1.1.2
A number that uniquely specifies this server enclosure in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackNetConnectorIndex		1.3.6.1.4.1.232.22.2.6.1.1.1.3
A number that uniquely specifies this network connector in the rack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpqRackNetConnectorEnclosureName		1.3.6.1.4.1.232.22.2.6.1.1.1.4
The name of the network connector enclosure. The string will be empty if the enclosure does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorName		1.3.6.1.4.1.232.22.2.6.1.1.1.5
The name of the network connector. The string will be empty if the network connector does not report the name or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorModel		1.3.6.1.4.1.232.22.2.6.1.1.1.6
The model name of the network connector. The string will be empty if the network connector does not report the model information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorSerialNum		1.3.6.1.4.1.232.22.2.6.1.1.1.7
The serial number of the network connector. The string will be empty if the network connector does not report the serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorPartNumber		1.3.6.1.4.1.232.22.2.6.1.1.1.8
The part number of the network connector. The string will be empty if the enclosure does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorSparePartNumber		1.3.6.1.4.1.232.22.2.6.1.1.1.9
The spare part number of the network connector. The string will be empty if the enclosure does not report this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorFWRev		1.3.6.1.4.1.232.22.2.6.1.1.1.10
The firmware revision of the network connector. The string will be empty if the network connector does not report the firmware revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorType		1.3.6.1.4.1.232.22.2.6.1.1.1.11
The type of network connector within the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), passive(2), active(3)

cpqRackNetConnectorLocation		1.3.6.1.4.1.232.22.2.6.1.1.1.12
The location of the network connector within the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorPresent		1.3.6.1.4.1.232.22.2.6.1.1.1.13
This specifies if the network connector described is present in the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), absent(2), present(3)

cpqRackNetConnectorHasFuses		1.3.6.1.4.1.232.22.2.6.1.1.1.14
The network connector contains fuses. This will be true(2) is the network connector contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackNetworkEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFusTable to get complete information on the fuses.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

cpqRackNetConnectorEnclosureSerialNum		1.3.6.1.4.1.232.22.2.6.1.1.1.15
The serial number of the enclosure containing the network connector. The string will be empty if the enclosure does not report the serial number or it could not be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNetConnectorTechnologyType		1.3.6.1.4.1.232.22.2.6.1.1.1.16
The type of network connector within the enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), passive(2), active(3)

cpqRackNetConnectorDeviceType		1.3.6.1.4.1.232.22.2.6.1.1.1.17
The type of interrconnect in the enclosure. This will be -1 if it is not reported or can not be deteremined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noconnect(1), network(2), fibrechannel(3), sas(4), inifiband(5), pciexpress(6)

cpqRackSystemObjectIdentification		1.3.6.1.4.1.232.22.3.1
The hardware identification string. The string will reported by the rack firmware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

cpqRackNameChanged		22001
Rack name has changed. This trap signifies that an agent or utility has changed the name of the rack. Each of the server blades in each of the enclosure within the rack will be updated to reflect the new rack name. It may take several minutes for the rack name change to be propagated throughout the entire rack. User Action: None.
TRAP-TYPE

cpqRackEnclosureNameChanged		22002
The enclosure name has changed. This trap signifies that an agent or utility has changed the name of an enclosure within the rack. Each of the components within the rack will be updated to reflect the new enclosure name. It may take several minutes for the enclosure name change to be propagated throughout the entire enclosure. User Action: None.
TRAP-TYPE

cpqRackEnclosureRemoved		22003
The enclosure has been removed. This trap signifies that an enclosure has been removed from the rack. User Action: None.
TRAP-TYPE

cpqRackEnclosureInserted		22004
The enclosure has been inserted. This trap signifies that an enclosure has been inserted into the rack. User Action: None.
TRAP-TYPE

cpqRackEnclosureTempFailed		22005
The enclosure temperature status has been set to failed. This trap signifies that a enclosure temperature sensor has been tripped indicating an overheat condition. User Action: Shutdown the enclosure and possibly the rack as soon as possible. Insure all fans are working properly and that air flow in the rack has not been blocked.
TRAP-TYPE

cpqRackEnclosureTempDegraded		22006
The enclosure temperature status has been set to degraded. This trap signifies that an enclosure temperature sensor has been tripped indicating a possible overheat condition. User Action: Shutdown the enclosure and possibly the rack as soon as possible. Insure all fans are working properly and that air flow in the rack has not been blocked.
TRAP-TYPE

cpqRackEnclosureTempOk		22007
The enclosure temperature status has been set to ok. This trap signifies that an enclosure temperature sensor has returned to normal. User Action: None.
TRAP-TYPE

cpqRackEnclosureFanFailed		22008
The enclosure fan status has been set to failed. This trap signifies that an enclosure fan has failed and no other fans in the redundant fan group are operating. This may result in overheating of the enclosure. User Action: Replace the fan as soon as possible.
TRAP-TYPE

cpqRackEnclosureFanDegraded		22009
The enclosure fan status has been set to degraded. This trap signifies that an enclosure fan has failed but other fans in the redundant fan group are still operating. This may result in overheating of the enclosure. User Action: Replace the fan as soon as possible.
TRAP-TYPE

cpqRackEnclosureFanOk		22010
The enclosure fan status has been set to ok. This trap signifies that an enclosure fan has returned to normal operation. User Action: None.
TRAP-TYPE

cpqRackEnclosureFanRemoved		22011
The enclosure fan has been removed. User Action: None.
TRAP-TYPE

cpqRackEnclosureFanInserted		22012
The enclosure fan has been inserted. User Action: None.
TRAP-TYPE

cpqRackPowerSupplyFailed		22013
The power supply status has been set to failed. This trap signifies that a power supply has failed. User Action: Replace the power supply as soon as possible.
TRAP-TYPE

cpqRackPowerSupplyDegraded		22014
The power supply status has been set to degraded. This trap signifies that a power supply has degraded. User Action: Replace the power supply as soon as possible.
TRAP-TYPE

cpqRackPowerSupplyOk		22015
The power supply status has been set to ok. This trap signifies that a power supply has returned to normal operation. User Action: None.
TRAP-TYPE

cpqRackPowerSupplyRemoved		22016
The power supply has been removed. User Action: None.
TRAP-TYPE

cpqRackPowerSupplyInserted		22017
The power supply has been inserted. User Action: None.
TRAP-TYPE

cpqRackPowerSubsystemNotRedundant		22018
The rack power subsystem is no longer in a redundant state. User Action: Replace any failed power supplies as soon as possible to return the system to a redundant state.
TRAP-TYPE

cpqRackPowerSubsystemLineVoltageProblem		22019
The rack power supply detected an input line voltage problem. User Action: Check the power input for the power supply or replace any failed power supplies as soon as possible.
TRAP-TYPE

cpqRackPowerSubsystemOverloadCondition		22020
The rack power subsystem overload condition. User Action: Replace any failed power supplies as soon as possible to return the system to a redundant state.
TRAP-TYPE

cpqRackPowerShedAutoShutdown		22021
Server shutdown due to power shedding. The server blade was shutdown due to a lack of power. User Action: Check power connections or add power supplies.
TRAP-TYPE

cpqRackServerPowerOnFailedNotRedundant		22022
Server power on prevented to preserve redundancy. There is not enough power to power on the server blade and maintain redundancy for the other blades in the enclosure. User Action: Check power connections or add power supplies.
TRAP-TYPE

cpqRackServerPowerOnFailedNotEnoughPower		22023
Inadequate power to power on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies.
TRAP-TYPE

cpqRackServerPowerOnFailedEnclosureNotFound		22024
Inadequate power to power on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies.
TRAP-TYPE

cpqRackServerPowerOnFailedPowerChassisNotFound		22025
Inadequate power to power on. There is not enough power to power on the server blade. The power enclosure micro-controller was not found. User Action: Check power enclosure connections or add power supplies.
TRAP-TYPE

cpqRackServerPowerOnManualOverride		22026
Server power on via manual override. The server blade was powered on by a manual override. User Action: None.
TRAP-TYPE

cpqRackFuseOpen		22027
Fuse open. The fuse has been tripped. User Action: Check enclosure and / or blade power connections and reset the fuse.
TRAP-TYPE

cpqRackServerBladeRemoved		22028
Server blade removed. The server blade has been removed from the enclosure. User Action: None.
TRAP-TYPE

cpqRackServerBladeInserted		22029
Server blade inserted. The server blade has been inserted into the enclosure. User Action: None.
TRAP-TYPE

cpqRackPowerChassisNotLoadBalanced		22030
Power subsystem not load balanced. The power subsystem is out of balance for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Add additional power supplies if needed.
TRAP-TYPE

cpqRackPowerChassisDcPowerProblem		22031
Power subsystem DC power problem. There is a power subsystem DC power problem for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies.
TRAP-TYPE

cpqRackPowerChassisAcFacilityPowerExceeded		22032
Power subsystem AC facility input power exceeded. There is a power subsystem Power subsystem AC facility input power exceeded for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies.
TRAP-TYPE

cpqRackPowerUnknownPowerConsumption		22033
Unknown power consumption. There is an unknown power consumer drawing power. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies.
TRAP-TYPE

cpqRackPowerChassisLoadBalancingWireMissing		22034
Power subsystem load balancing wire missing. The power subsystem load balancing wire missing. User Action: Connect the load balancing wire.
TRAP-TYPE

cpqRackPowerChassisTooManyPowerChassis		22035
Power subsystem has too may power enclosures. The maximum number of power enclosures has been exceeded. User Action: Remove the extra power enclosure.
TRAP-TYPE

cpqRackPowerChassisConfigError		22036
Power subsystem improperly configured. The power subsystem has been improperly configured. User Action: Check the cabling of the power enclosure.
TRAP-TYPE

cpqRackEnclosureManagerDegraded		22037
The Onboard Administrator or other management processor status has been set to degraded. This trap signifies that either an Onboard Administrator has failed but the other Onboard Administrator is still operating, or one or more management processors is in a non-optimal operating state. User Action: For C-Class enclosures, replace the Onboard Administrator as soon as possible. For all others please refer to product documenation for possible corrective actions
TRAP-TYPE

cpqRackEnclosureManagerOk		22038
The Onboard Administrator or other management processor's status has been set to ok. This trap signifies that an Onboard Administrator or other management processor has returned to normal operation. User Action: None.
TRAP-TYPE

cpqRackEnclosureManagerRemoved		22039
The Onboard Administrator has been removed. User Action: None.
TRAP-TYPE

cpqRackEnclosureManagerInserted		22040
The Onboard Administrator or other management processor has been inserted. User Action: None.
TRAP-TYPE

cpqRackManagerPrimaryRole		22041
The Onboard Administrator or other management processor has taken the role of primary. User Action: None.
TRAP-TYPE

cpqRackServerBladeEKeyingFailed		22042
The server blade e-keying has failed. This trap signifies that a server blade e-keying has failed and there is a port mapping problem between a server mezz card and the interconnect. User Action: Reconfigure server blade mezz cards.
TRAP-TYPE

cpqRackServerBladeEKeyingOK		22043
The server blade e-keying is ok. This trap signifies that a server blade e-keying has returned to normal operation. User Action: None.
TRAP-TYPE

cpqRackNetConnectorRemoved		22044
Interconnect removed. The interconnect has been removed from the enclosure. User Action: None.
TRAP-TYPE

cpqRackNetConnectorInserted		22045
Interconnect inserted. The interconnect has been inserted into the enclosure. User Action: None.
TRAP-TYPE

cpqRackNetConnectorFailed		22046
The interconnect status has been set to failed. This trap signifies that a interconnect has failed. User Action: Replace the interconnect as soon as possible.
TRAP-TYPE

cpqRackNetConnectorDegraded		22047
The interconnect status has been set to degraded. This trap signifies that a interconnect has degraded. User Action: Replace the interconnect as soon as possible.
TRAP-TYPE

cpqRackNetConnectorOk		22048
The interconnect status has been set to ok. This trap signifies that a interconnect has returned to normal operation. User Action: None.
TRAP-TYPE

cpqRackServerBladeToLowPower		22049
The server blade requested to low power. User Action: None.
TRAP-TYPE

cpqRackServerBladeRemoved2		22050
Server blade removed. The server blade has been removed from the enclosure. User Action: None.
TRAP-TYPE

cpqRackServerBladeInserted2		22051
Server blade inserted. The server blade has been inserted into the enclosure. User Action: None.
TRAP-TYPE

cpqRackServerBladeStatusRepaired		22052
Server blade repaired. The server blade status has changed to OK. User Action: None.
TRAP-TYPE

cpqRackServerBladeStatusDegraded		22053
Server blade health status Degraded. The server blade health status has changed to Degraded. User Action: Check blade server and enclosure SYSLOG.
TRAP-TYPE

cpqRackServerBladeStatusCritical		22054
Server blade health status Critical. The server blade health status has changed to Critical. User Action: Check blade server and enclosure SYSLOG.
TRAP-TYPE

cpqRackServerBladeGrpCapTimeout		22055
The server blade is not responding to the group capper. The server blade is not responding to capping requests from the enclosure group capper User Action: Reset the iLO management processor.
TRAP-TYPE

cpqRackServerBladeUnexpectedShutdown		22056
Server blade shutdown unexpectadly. An unexpected shutdown event has occurred for this server blade. User Action: Check blade server and enclosure SYSLOG.
TRAP-TYPE

cpqRackServerBladeMangementControllerFirmwareUpdating		22057
Server blade's management controller firmware updating. This server blade's management controller has started updating it's firmware. User Action: None.
TRAP-TYPE

cpqRackServerBladeMangementControllerFirmwareUpdateComplete		22058
Server blade's management controller firmware update has completed. This server blade's management controller has finished updating it's firmware. User Action: None.
TRAP-TYPE

cpqRackServerBladeSystemBIOSFirmwareUpdating		22059
Server blade's system BIOS firmware updating. This server blade's system BIOS has started updating. User Action: None.
TRAP-TYPE

cpqRackServerBladeSystemBIOSFirmwareUpdateCompleted		22060
Server blade's system BIOS firmware update complete. This server blade's system BIOS has completed updating. User Action: None.
TRAP-TYPE

cpqRackServerBladeFrontIOBlankingActive		22061
Server blade has disabled front IO ports. Front IO blanking status has changed to active for this server blade. User Action: None.
TRAP-TYPE

cpqRackServerBladeRemoteFrontIOBlankingInactive		22062
Server blade has front IO blanking mode now inactive. Front IO blanking status has changed to inactive for this server blade. User Action: None.
TRAP-TYPE

cpqRackServerBladeDiagnosticAdaptorInserted		22063
Server blade diagnostic adaptor inserted. Blade diagnostic adaptor status has changed to inserted for this server blade. User Action: None.
TRAP-TYPE

cpqRackServerBladeDiagnosticAdaptorRemoved		22064
Server blade diagnostic adaptor removed. Blade diagnostic adaptor status has changed to removed for this server blade. User Action: None.
TRAP-TYPE

cpqRackServerBladeEnteredPXEBootMode		22065
Server blade has entered PXE Boot Mode. Server blade Pre-Boot-eXecution (PXE) Mode started. User Action: None.
TRAP-TYPE

cpqRackServerBladeExitedPXEBootMode		22066
Server blade has exited PXE Boot Mode. Server blade Pre-Boot-eXecution (PXE) Mode exited. User Action: None.
TRAP-TYPE

cpqRackServerBladeWarmReset		22067
Server blade has been warm reset. Server blade has experienced a warm reset. User Action: None.
TRAP-TYPE

cpqRackServerBladePOSTCompleted		22068
Server blade system BIOS POST complete. Server blade has completed system BIOS Power-On-Self-Test (POST). User Action: None.
TRAP-TYPE

cpqRackServerBladePoweredOn		22069
Server blade has powered on. User Action: None.
TRAP-TYPE

cpqRackServerBladePoweredOff		22070
Server blade has powered off. User Action: None.
TRAP-TYPE

cpqRackInformationalEAETrap		22071
EAE Informational trap
TRAP-TYPE

cpqRackMinorEAETrap		22072
EAE Minor trap
TRAP-TYPE

cpqRackMajorEAETrap		22073
EAE Major trap
TRAP-TYPE

cpqRackCriticalEAETrap		22074
EAE Critical trap
TRAP-TYPE

cpqRackPowerMinorEAETrap		22075
FlexFabric Cmdr Power Subsystem Minor trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions.
TRAP-TYPE

cpqRackPowerMajorEAETrap		22076
FlexFabric Cmdr Power Subsystem Major trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions.
TRAP-TYPE

cpqRackPowerCriticalEAETrap		22077
FlexFabric Cmdr Power Subsystem Critical trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions.
TRAP-TYPE