CPQAPPG80-MIB

File: CPQAPPG80-MIB.mib (52817 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter DisplayString
OBJECT-TYPE TRAP-TYPE

Defined Types

CpqSMASubsystemEntry  
SEQUENCE    
  cpqSMASubsystemIndex INTEGER
  cpqSMASubsystemName DisplayString
  cpqSMASubsystemControllerOne INTEGER
  cpqSMASubsystemControllerTwo INTEGER
  cpqSMASubsystemEMUState INTEGER
  cpqSMASubsystemEMUVersion DisplayString
  cpqSMASubsystemEMUSensor1 INTEGER
  cpqSMASubsystemEMUSensor2 INTEGER
  cpqSMASubsystemEMUSensor3 INTEGER
  cpqSMASubsystemEMUFanspeed INTEGER
  cpqSMASubsystemEMUAlarm INTEGER
  cpqSMASubsystemState INTEGER
  cpqSMASubsystemAlias DisplayString

CpqSMAControllerEntry  
SEQUENCE    
  cpqSMAControllerIndex INTEGER
  cpqSMAControllerName DisplayString
  cpqSMAControllerSerialNumber DisplayString
  cpqSMAControllerFirmware DisplayString
  cpqSMAControllerHardware DisplayString
  cpqSMAControllerNodeID DisplayString
  cpqSMAControllerIdentifier DisplayString
  cpqSMAControllerAllocationClass INTEGER
  cpqSMAControllerScsiVersion INTEGER
  cpqSMAControllerRedundancy INTEGER
  cpqSMAControllerScsiID INTEGER
  cpqSMAControllerCacheSize INTEGER
  cpqSMAControllerCacheType INTEGER
  cpqSMAControllerCacheVersion DisplayString
  cpqSMAControllerCacheFlushTimer INTEGER
  cpqSMAControllerMirrorCache INTEGER
  cpqSMAControllerPort-1-ID DisplayString
  cpqSMAControllerPort-1-Topology INTEGER
  cpqSMAControllerPort-1-State INTEGER
  cpqSMAControllerPort-2-ID DisplayString
  cpqSMAControllerPort-2-Topology INTEGER
  cpqSMAControllerPort-2-State INTEGER
  cpqSMAControllerPairIndex INTEGER
  cpqSMAControllerCacheState INTEGER
  cpqSMAControllerBatteryCheckState INTEGER
  cpqSMAControllerBatteryChargeState INTEGER
  cpqSMAControllerBatteryExpiryDate DisplayString
  cpqSMAControllerSubsystemIndex INTEGER
  cpqSMAControllerPort-1-Address DisplayString
  cpqSMAControllerPort-2-Address DisplayString
  cpqSMAControllerLogicalDiskIndexes DisplayString
  cpqSMAControllerSnapshotIndexes DisplayString

CpqSMALogicalDiskEntry  
SEQUENCE    
  cpqSMALogicalDiskIndex INTEGER
  cpqSMALogicalDiskName DisplayString
  cpqSMALogicalDiskSize INTEGER
  cpqSMALogicalDiskCreatedFromIndex INTEGER
  cpqSMALogicalDiskReadCache INTEGER
  cpqSMALogicalDiskWriteBackCache INTEGER
  cpqSMALogicalDiskWriteProtectCache INTEGER
  cpqSMALogicalDiskReadAheadCache INTEGER
  cpqSMALogicalDiskRunState INTEGER
  cpqSMALogicalDiskState INTEGER
  cpqSMALogicalDiskCachedTransferSize INTEGER
  cpqSMALogicalDiskPreferredPath INTEGER
  cpqSMALogicalDiskHostAccess DisplayString
  cpqSMALogicalDiskIdentifier DisplayString
  cpqSMALogicalDiskHeads INTEGER
  cpqSMALogicalDiskCylinders INTEGER
  cpqSMALogicalDiskSectors INTEGER
  cpqSMALogicalDiskControllerInstance INTEGER
  cpqSMALogicalDiskCreatedFromType INTEGER
  cpqSMALogicalDiskIdentifierSwitch INTEGER
  cpqSMALogicalDiskSnapped INTEGER
  cpqSMALogicalDiskSnapshotInstance INTEGER
  cpqSMALogicalDiskSubsystemIndex INTEGER

CpqSMAPhysicalDiskEntry  
SEQUENCE    
  cpqSMAPhysicalDiskIndex INTEGER
  cpqSMAPhysicalDiskName DisplayString
  cpqSMAPhysicalDiskModel DisplayString
  cpqSMAPhysicalDiskPort INTEGER
  cpqSMAPhysicalDiskTarget INTEGER
  cpqSMAPhysicalDiskLun INTEGER
  cpqSMAPhysicalDiskSize INTEGER
  cpqSMAPhysicalDiskTransportable INTEGER
  cpqSMAPhysicalDiskTransferRate INTEGER
  cpqSMAPhysicalDiskState INTEGER
  cpqSMAPhysicalDiskUsedByIndex INTEGER
  cpqSMAPhysicalDiskNoofPartitions INTEGER
  cpqSMAPhysicalDiskUsedByType INTEGER
  cpqSMAPhysicalDiskSubsystemIndex INTEGER

CpqSMAStorageSetEntry  
SEQUENCE    
  cpqSMAStorageSetIndex INTEGER
  cpqSMAStorageSetName DisplayString
  cpqSMAStorageSetRaidType INTEGER
  cpqSMAStorageSetSize INTEGER
  cpqSMAStorageSetPolicy INTEGER
  cpqSMAStorageSetReconstruct INTEGER
  cpqSMAStorageSetCopy INTEGER
  cpqSMAStorageSetReadSource DisplayString
  cpqSMAStorageSetAutospare INTEGER
  cpqSMAStorageSetChunkSize INTEGER
  cpqSMAStorageSetNoOfDisks INTEGER
  cpqSMAStorageSetDisksIndex DisplayString
  cpqSMAStorageSetState INTEGER
  cpqSMAStorageSetUsedByIndex INTEGER
  cpqSMAStorageSetNoofPartitions INTEGER
  cpqSMAStorageSetSubsystemIndex INTEGER
  cpqSMAStorageSetUsedByType INTEGER

CpqSMAPartitionEntry  
SEQUENCE    
  cpqSMAPartitionIndex INTEGER
  cpqSMAPartitionName DisplayString
  cpqSMAPartitionNumber INTEGER
  cpqSMAPartitionDeviceIndex INTEGER
  cpqSMAPartitionState INTEGER
  cpqSMAPartitionUsedByIndex INTEGER
  cpqSMAPartitionSize INTEGER
  cpqSMAPartitionType INTEGER
  cpqSMAPartitionSubsystemIndex INTEGER

CpqSMAConnectionEntry  
SEQUENCE    
  cpqSMAConnectionIndex INTEGER
  cpqSMAConnectionName DisplayString
  cpqSMAConnectionOSName DisplayString
  cpqSMAConnectionController INTEGER
  cpqSMAConnectionControllerPortNum INTEGER
  cpqSMAConnectionStatus INTEGER
  cpqSMAConnectionOnlineTo INTEGER
  cpqSMAConnectionLunOffset INTEGER
  cpqSMAConnectionHostID DisplayString
  cpqSMAConnectionAdapterID DisplayString
  cpqSMAConnectionUnitAddress DisplayString
  cpqSMAConnectionSubsystemIndex INTEGER

CpqSMASnapshotEntry  
SEQUENCE    
  cpqSMASnapshotIndex INTEGER
  cpqSMASnapshotName DisplayString
  cpqSMASnapshotSize INTEGER
  cpqSMASnapshotCreatedFromIndex INTEGER
  cpqSMASnapshotOf INTEGER
  cpqSMASnapshotState INTEGER
  cpqSMASnapshotPreferredPath INTEGER
  cpqSMASnapshotHostAccess DisplayString
  cpqSMASnapshotIdentifier DisplayString
  cpqSMASnapshotHeads INTEGER
  cpqSMASnapshotCylinders INTEGER
  cpqSMASnapshotSectors INTEGER
  cpqSMASnapshotControllerInstance INTEGER
  cpqSMASnapshotIdentifierSwitch INTEGER
  cpqSMASnapshotSubsystemIndex INTEGER

Defined Values

compaq 1.3.6.1.4.1.232
OBJECT IDENTIFIER    

cpqSanAppliance 1.3.6.1.4.1.232.151
OBJECT IDENTIFIER    

cpqsmav1 1.3.6.1.4.1.232.151.100
OBJECT IDENTIFIER    

cpqSMAAgent 1.3.6.1.4.1.232.151.100.1
OBJECT IDENTIFIER    

cpqSMASubsystem 1.3.6.1.4.1.232.151.100.2
OBJECT IDENTIFIER    

cpqSMAController 1.3.6.1.4.1.232.151.100.3
OBJECT IDENTIFIER    

cpqSMALogicalDisk 1.3.6.1.4.1.232.151.100.4
OBJECT IDENTIFIER    

cpqSMAPhysicalDisk 1.3.6.1.4.1.232.151.100.5
OBJECT IDENTIFIER    

cpqSMAStorageSet 1.3.6.1.4.1.232.151.100.6
OBJECT IDENTIFIER    

cpqSMAPartition 1.3.6.1.4.1.232.151.100.7
OBJECT IDENTIFIER    

cpqSMAConnection 1.3.6.1.4.1.232.151.100.8
OBJECT IDENTIFIER    

cpqSMASnapshot 1.3.6.1.4.1.232.151.100.9
OBJECT IDENTIFIER    

cpqSMAAgentVersionMajor 1.3.6.1.4.1.232.151.100.1.1
The version of the agent
OBJECT-TYPE    
  INTEGER  

cpqSMAAgentVersionMinor 1.3.6.1.4.1.232.151.100.1.2
The version of the agent
OBJECT-TYPE    
  INTEGER  

cpqSMAAgentActive 1.3.6.1.4.1.232.151.100.1.3
The state of the agent
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

cpqSMAAgentRefreshTime 1.3.6.1.4.1.232.151.100.1.4
The time interval before the next data collection. The information about the HSG80 is collected periodically. A thread gathers the information and stores it in memory. This variable is used to specify the time interval in minutes (MINUTES) between each update.
OBJECT-TYPE    
  INTEGER  

cpqSMAAgentHostName 1.3.6.1.4.1.232.151.100.1.5
The name of the local machine where the agent is running.
OBJECT-TYPE    
  DisplayString  

cpqSMASubsystemTable 1.3.6.1.4.1.232.151.100.2.1
The table of Subsystems
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMASubsystemEntry

cpqSMASubsystemEntry 1.3.6.1.4.1.232.151.100.2.1.1
A table entry for a Subsystem
OBJECT-TYPE    
  CpqSMASubsystemEntry  

cpqSMASubsystemIndex 1.3.6.1.4.1.232.151.100.2.1.1.1
The Subsystem index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMASubsystemName 1.3.6.1.4.1.232.151.100.2.1.1.2
The name of the Subsystem.
OBJECT-TYPE    
  DisplayString  

cpqSMASubsystemControllerOne 1.3.6.1.4.1.232.151.100.2.1.1.3
The index of controller one thats belongs to this subsytem. If the value is -1 then either the controller is not installed or not operational.
OBJECT-TYPE    
  INTEGER 0..9999  

cpqSMASubsystemControllerTwo 1.3.6.1.4.1.232.151.100.2.1.1.4
The index of controller two thats belongs to this subsytem. If the value is -1 then either the controller is not installed or not operational.
OBJECT-TYPE    
  INTEGER 0..9999  

cpqSMASubsystemEMUState 1.3.6.1.4.1.232.151.100.2.1.1.5
Subsystem Environmental Monitoring Unit (EMU) State. nooper(1) - EMU is either not installed or not operational. oper(2) - EMU is operational.
OBJECT-TYPE    
  INTEGER nooper(1), oper(2), unknown(3)  

cpqSMASubsystemEMUVersion 1.3.6.1.4.1.232.151.100.2.1.1.6
Subsystem Environmental Monitoring Unit (EMU) Microcode verion.
OBJECT-TYPE    
  DisplayString  

cpqSMASubsystemEMUSensor1 1.3.6.1.4.1.232.151.100.2.1.1.7
Subsystem Environmental Monitoring Unit (EMU) Sensor1 value (in Celsius). Sensor1 sets the maximum operating temperature for the primary subsystem cabinet.
OBJECT-TYPE    
  INTEGER 0..49  

cpqSMASubsystemEMUSensor2 1.3.6.1.4.1.232.151.100.2.1.1.8
Subsystem Environmental Monitoring Unit (EMU) Sensor2 value (in Celsius). Sensor2 also sets the maximum operating temperature for the primary subsystem cabinet.
OBJECT-TYPE    
  INTEGER 0..49  

cpqSMASubsystemEMUSensor3 1.3.6.1.4.1.232.151.100.2.1.1.9
Subsystem Environmental Monitoring Unit (EMU) Sensor3 value (in Celsius). Sensor3 sets the maximum operating temperature for the EMU unit.
OBJECT-TYPE    
  INTEGER 0..49  

cpqSMASubsystemEMUFanspeed 1.3.6.1.4.1.232.151.100.2.1.1.10
Subsystem Fanspeed. FANSPEED=HIGH forces the fans in all connected cabinets to operate at high speed continuously. FANSPEED=AUTOMATIC allows the EMU to control the fan speed for the fans in all connected cabinets. The EMU instructs the fans to operate at high speed when any of the temperature setpoints are exceeded or when one or more fans are not functioning.
OBJECT-TYPE    
  INTEGER high(1), automatic(2), unknown(3)  

cpqSMASubsystemEMUAlarm 1.3.6.1.4.1.232.151.100.2.1.1.11
Subsystem Environmental Monitoring Unit Alarm. Determines whether or not the audible alarm of the EMU will sound in the following cases: drive failure controller restart The EMU alarm will still sound in the event of an adverse environmental condition, such as a power failure or an over-temperature condition.
OBJECT-TYPE    
  INTEGER silent(1), audible(2), unknown(3)  

cpqSMASubsystemState 1.3.6.1.4.1.232.151.100.2.1.1.12
Gives us the overall state of the HSG80 subsystem.
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), degraded(3), offline(4)  

cpqSMASubsystemAlias 1.3.6.1.4.1.232.151.100.2.1.1.13
The Subsystem Alias.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerTable 1.3.6.1.4.1.232.151.100.3.1
The table of controllers
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMAControllerEntry

cpqSMAControllerEntry 1.3.6.1.4.1.232.151.100.3.1.1
A table entry for a controller
OBJECT-TYPE    
  CpqSMAControllerEntry  

cpqSMAControllerIndex 1.3.6.1.4.1.232.151.100.3.1.1.1
The controller index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAControllerName 1.3.6.1.4.1.232.151.100.3.1.1.2
The name of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerSerialNumber 1.3.6.1.4.1.232.151.100.3.1.1.3
The serial number of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerFirmware 1.3.6.1.4.1.232.151.100.3.1.1.4
The firmware of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerHardware 1.3.6.1.4.1.232.151.100.3.1.1.5
The hardware revision of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerNodeID 1.3.6.1.4.1.232.151.100.3.1.1.6
Manufacturer assigned ID of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerIdentifier 1.3.6.1.4.1.232.151.100.3.1.1.7
The user assigned identifier if any of the controller.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerAllocationClass 1.3.6.1.4.1.232.151.100.3.1.1.8
The controller allocation class
OBJECT-TYPE    
  INTEGER 0..4294967295  

cpqSMAControllerScsiVersion 1.3.6.1.4.1.232.151.100.3.1.1.9
The scsi version of the controller
OBJECT-TYPE    
  INTEGER scsi-2(1), scsi-3(2), unknown(3)  

cpqSMAControllerRedundancy 1.3.6.1.4.1.232.151.100.3.1.1.10
The redundancy type of the controller
OBJECT-TYPE    
  INTEGER single(1), dual(2), multibus(3), transparent(4), unknown(5)  

cpqSMAControllerScsiID 1.3.6.1.4.1.232.151.100.3.1.1.11
The device port scsi address of the controller
OBJECT-TYPE    
  INTEGER 0..15  

cpqSMAControllerCacheSize 1.3.6.1.4.1.232.151.100.3.1.1.12
The cache size in megabytes. Can be either 64, 128, 256 or 512 MB.
OBJECT-TYPE    
  INTEGER 64..512  

cpqSMAControllerCacheType 1.3.6.1.4.1.232.151.100.3.1.1.13
The cache type of this controller
OBJECT-TYPE    
  INTEGER read(1), write(2), read-ahead(3), write-through(4), write-back(5), unknown(6)  

cpqSMAControllerCacheVersion 1.3.6.1.4.1.232.151.100.3.1.1.14
The version of this controllers cache.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerCacheFlushTimer 1.3.6.1.4.1.232.151.100.3.1.1.15
The cache flush timer in sec
OBJECT-TYPE    
  INTEGER 0..65535  

cpqSMAControllerMirrorCache 1.3.6.1.4.1.232.151.100.3.1.1.16
The mirror cache state of this controller
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMAControllerPort-1-ID 1.3.6.1.4.1.232.151.100.3.1.1.17
The ID of port 1.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerPort-1-Topology 1.3.6.1.4.1.232.151.100.3.1.1.18
The topology of this controller
OBJECT-TYPE    
  INTEGER fabric(1), loop-hard(2), loop-soft(3), offline(4), unknown(5)  

cpqSMAControllerPort-1-State 1.3.6.1.4.1.232.151.100.3.1.1.19
The state of this port
OBJECT-TYPE    
  INTEGER fabricup(1), standby(2), connectiondown(3), unknown(4)  

cpqSMAControllerPort-2-ID 1.3.6.1.4.1.232.151.100.3.1.1.20
The ID of port 2.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerPort-2-Topology 1.3.6.1.4.1.232.151.100.3.1.1.21
The topology of this controller
OBJECT-TYPE    
  INTEGER fabric(1), loop-hard(2), loop-soft(3), offline(4), unknown(5)  

cpqSMAControllerPort-2-State 1.3.6.1.4.1.232.151.100.3.1.1.22
The state of this port
OBJECT-TYPE    
  INTEGER fabricup(1), standby(2), connectiondown(3), unknown(4)  

cpqSMAControllerPairIndex 1.3.6.1.4.1.232.151.100.3.1.1.23
The index of this controller's pair if FAILOVER mode (cpqSMAControllerRedundancy) is mutlibus or transparent. If there is no FAILOVER mode (cpqSMAControllerRedundancy is single or unknown) then the value is -1.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAControllerCacheState 1.3.6.1.4.1.232.151.100.3.1.1.24
The state of the controller cache.
OBJECT-TYPE    
  INTEGER good(1), bad(2), unknown(3)  

cpqSMAControllerBatteryCheckState 1.3.6.1.4.1.232.151.100.3.1.1.25
Battery check state. Specifies whether the controller should perform regular battery condition checks. If CACHE-UPS (ups) the controller does not check the condition of the cache batteries and ignores the battery's state. If NOCACHE-UPS (noups) the controller performs regular cache battery checks and evaluates the condition of the cache batteries.
OBJECT-TYPE    
  INTEGER ups(1), noups(2), unknown(3)  

cpqSMAControllerBatteryChargeState 1.3.6.1.4.1.232.151.100.3.1.1.26
This is the value in % (percentage) of the amount the controller battery is charged. A value of 0 (zero) means DANGER: BATTERY LIFETIME HAS EXPIRED, REPLACE BATTERY NOW!.
OBJECT-TYPE    
  INTEGER 0..100  

cpqSMAControllerBatteryExpiryDate 1.3.6.1.4.1.232.151.100.3.1.1.27
The expiry date of the controller battery.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerSubsystemIndex 1.3.6.1.4.1.232.151.100.3.1.1.28
The index of the subsystem to which this controller belongs.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMAControllerPort-1-Address 1.3.6.1.4.1.232.151.100.3.1.1.29
The Host-Port1 Address.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerPort-2-Address 1.3.6.1.4.1.232.151.100.3.1.1.30
The Host-Port2 Address.
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerLogicalDiskIndexes 1.3.6.1.4.1.232.151.100.3.1.1.31
The indexes of all the logical disks associated with the controller. Each index is seperated by a ':' .
OBJECT-TYPE    
  DisplayString  

cpqSMAControllerSnapshotIndexes 1.3.6.1.4.1.232.151.100.3.1.1.32
The indexes of all the snapshots associated with the controller. Each index is seperated by a ':' .
OBJECT-TYPE    
  DisplayString  

cpqSMALogicalDiskTable 1.3.6.1.4.1.232.151.100.4.1
The table of LogicalDisks
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMALogicalDiskEntry

cpqSMALogicalDiskEntry 1.3.6.1.4.1.232.151.100.4.1.1
A table entry for a LogicalDisk
OBJECT-TYPE    
  CpqSMALogicalDiskEntry  

cpqSMALogicalDiskIndex 1.3.6.1.4.1.232.151.100.4.1.1.1
The LogicalDisk index. This is just a ordered sequence done by the agent, has no relationship to the unit offset or unit name/number.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMALogicalDiskName 1.3.6.1.4.1.232.151.100.4.1.1.2
The name of the LogicalDisk.
OBJECT-TYPE    
  DisplayString  

cpqSMALogicalDiskSize 1.3.6.1.4.1.232.151.100.4.1.1.3
Logical Drive Size. This is the size of the logical drive in blocks. One block equals 512 bytes (1 block = 512 bytes).
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMALogicalDiskCreatedFromIndex 1.3.6.1.4.1.232.151.100.4.1.1.4
Logical Drive Created From Instance. This gives us the instance of the storageset or physical disk from which this LUN was created.
OBJECT-TYPE    
  INTEGER  

cpqSMALogicalDiskReadCache 1.3.6.1.4.1.232.151.100.4.1.1.5
Logical Drive Read Cache. The state of the read cache for the associated logical drives.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMALogicalDiskWriteBackCache 1.3.6.1.4.1.232.151.100.4.1.1.6
Logical Drive WriteBack Cache. The state of the writeback cache for the associated logical drives.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMALogicalDiskWriteProtectCache 1.3.6.1.4.1.232.151.100.4.1.1.7
Logical Drive WriteProtect Cache. The state of the write protect cache for the associated logical drives.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMALogicalDiskReadAheadCache 1.3.6.1.4.1.232.151.100.4.1.1.8
Logical Drive ReadAhead Cache. The state of the readahead cache for the associated logical drives.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMALogicalDiskRunState 1.3.6.1.4.1.232.151.100.4.1.1.9
Logical Drive Run State. The run state for the associated logical drives. you specify RUN to make a unit available to the host.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMALogicalDiskState 1.3.6.1.4.1.232.151.100.4.1.1.10
Logical Drive State. The state of the associated logical drive.
OBJECT-TYPE    
  INTEGER online(1), available(2), unknown(3)  

cpqSMALogicalDiskCachedTransferSize 1.3.6.1.4.1.232.151.100.4.1.1.11
Logical Drive CachedTransferSize. The largest number of write blocks to be cached by the controller. The controller will not cache any transfers over the specified size.
OBJECT-TYPE    
  INTEGER 1..2048  

cpqSMALogicalDiskPreferredPath 1.3.6.1.4.1.232.151.100.4.1.1.12
Logical Drive PreferredPath. May be set only when dual redundant controllers are operating in a multiple-bus failover configuration.
OBJECT-TYPE    
  INTEGER this(1), other(2), none(3)  

cpqSMALogicalDiskHostAccess 1.3.6.1.4.1.232.151.100.4.1.1.13
Logical Drive Host Access. Specifies the access path.
OBJECT-TYPE    
  DisplayString  

cpqSMALogicalDiskIdentifier 1.3.6.1.4.1.232.151.100.4.1.1.14
Logical Drive ID (Lun-ID) This ID consists of the controller node ID plus a 64-bit unit ID generated by the subsystem.
OBJECT-TYPE    
  DisplayString  

cpqSMALogicalDiskHeads 1.3.6.1.4.1.232.151.100.4.1.1.15
Number of Heads.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMALogicalDiskCylinders 1.3.6.1.4.1.232.151.100.4.1.1.16
Number of Cylinders.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMALogicalDiskSectors 1.3.6.1.4.1.232.151.100.4.1.1.17
Number of Sectors.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMALogicalDiskControllerInstance 1.3.6.1.4.1.232.151.100.4.1.1.18
Logical Drive Controller Instance. This gives us the instance of the controller to which this LUN is online.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMALogicalDiskCreatedFromType 1.3.6.1.4.1.232.151.100.4.1.1.19
Logical Drive Created from type. Tells us whether the LUN was created from an entire physical disk, entire storageset or from a partition(logical or physical). cpqSMALogicalDiskCreatedFromIndex gives us the instance of the object.
OBJECT-TYPE    
  INTEGER physicaldisk(1), storageset(2), partition(3)  

cpqSMALogicalDiskIdentifierSwitch 1.3.6.1.4.1.232.151.100.4.1.1.20
Logical Drive Identifier switch. This is used with the SCSI-VERSION switch when the SCSI version is set to SCSI-3 mode. The IDENTIFIER switch creates a unique unit identifier makes the unit visible to the host.This number can be a value between 1-9999. The value 0 means NOIDENTIFIER.
OBJECT-TYPE    
  INTEGER 0..9999  

cpqSMALogicalDiskSnapped 1.3.6.1.4.1.232.151.100.4.1.1.21
Logical Drive Snapped. This tells us if a snapshot of this disk exists.
OBJECT-TYPE    
  INTEGER no(1), yes(2), unknown(3)  

cpqSMALogicalDiskSnapshotInstance 1.3.6.1.4.1.232.151.100.4.1.1.22
Logical Drive Snapshot instance. If the disk has a snapshot ie. cpqSMALogicalDiskSnapped is yes, then this gives us the instance of the snapshot else -1.
OBJECT-TYPE    
  INTEGER 0..9999  

cpqSMALogicalDiskSubsystemIndex 1.3.6.1.4.1.232.151.100.4.1.1.23
The index of the subsystem where this logical disk resides.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMAPhysicalDiskTable 1.3.6.1.4.1.232.151.100.5.1
The table of PhysicalDisks
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMAPhysicalDiskEntry

cpqSMAPhysicalDiskEntry 1.3.6.1.4.1.232.151.100.5.1.1
A table entry for a PhysicalDisk
OBJECT-TYPE    
  CpqSMAPhysicalDiskEntry  

cpqSMAPhysicalDiskIndex 1.3.6.1.4.1.232.151.100.5.1.1.1
The PhysicalDisk index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskName 1.3.6.1.4.1.232.151.100.5.1.1.2
The name of the PhysicalDisk.
OBJECT-TYPE    
  DisplayString  

cpqSMAPhysicalDiskModel 1.3.6.1.4.1.232.151.100.5.1.1.3
The model of the PhysicalDisk.
OBJECT-TYPE    
  DisplayString  

cpqSMAPhysicalDiskPort 1.3.6.1.4.1.232.151.100.5.1.1.4
The PhysicalDisk Port
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskTarget 1.3.6.1.4.1.232.151.100.5.1.1.5
The PhysicalDisk target
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskLun 1.3.6.1.4.1.232.151.100.5.1.1.6
The PhysicalDisk LUN
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskSize 1.3.6.1.4.1.232.151.100.5.1.1.7
Physical Disk Size. This is the size of the physical disk in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so this value may differ from the advertised size of a drive.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMAPhysicalDiskTransportable 1.3.6.1.4.1.232.151.100.5.1.1.8
PhysicalDisk Transportable. Indicates whether a disk drive can be accessed exclusively by StorageWorks.
OBJECT-TYPE    
  INTEGER disable(1), enable(2), unknown(3)  

cpqSMAPhysicalDiskTransferRate 1.3.6.1.4.1.232.151.100.5.1.1.9
PhysicalDisk Transportable. Indicates whether a disk drive can be accessed exclusively by StorageWorks.
OBJECT-TYPE    
  INTEGER asynchronous(1), mhz20(2), mhz10(3), mhz5(4), unknown(5)  

cpqSMAPhysicalDiskState 1.3.6.1.4.1.232.151.100.5.1.1.10
PhysicalDisk State. Indicates whether a disk drive has been assigend to a storageset, lun or not.
OBJECT-TYPE    
  INTEGER free(1), assigned(2), unknown(3)  

cpqSMAPhysicalDiskUsedByIndex 1.3.6.1.4.1.232.151.100.5.1.1.11
PhysicalDisk Used by index. This is the index of the lun or storageset that was created by using this physical disk. If the disk is unassigned or free ie. cpqSMAPhysicalDiskState = 1 then the index is of the this controller.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskNoofPartitions 1.3.6.1.4.1.232.151.100.5.1.1.12
The number of partitions on this PhysicalDisk.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPhysicalDiskUsedByType 1.3.6.1.4.1.232.151.100.5.1.1.13
PhysicalDisk UsedByType. If this disk has been assigned ie. cpqSMAPhysicalDiskState = 2, then this indicates the type of object that was created using this disk ie. whether it is a storageset or a lun and cpqSMAPhysicalDiskUsedByIndex gives you the instance of that object.
OBJECT-TYPE    
  INTEGER none(1), storageset(2), lun(3)  

cpqSMAPhysicalDiskSubsystemIndex 1.3.6.1.4.1.232.151.100.5.1.1.14
The index of the subsystem where this physical disk resides.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMAStorageSetTable 1.3.6.1.4.1.232.151.100.6.1
The table of StorageSets
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMAStorageSetEntry

cpqSMAStorageSetEntry 1.3.6.1.4.1.232.151.100.6.1.1
A table entry for a StorageSet
OBJECT-TYPE    
  CpqSMAStorageSetEntry  

cpqSMAStorageSetIndex 1.3.6.1.4.1.232.151.100.6.1.1.1
The StorageSet index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAStorageSetName 1.3.6.1.4.1.232.151.100.6.1.1.2
The name of the StorageSet.
OBJECT-TYPE    
  DisplayString  

cpqSMAStorageSetRaidType 1.3.6.1.4.1.232.151.100.6.1.1.3
The StorageSet Raid Type
OBJECT-TYPE    
  INTEGER stripeset(1), mirrorset(2), raidset(3), raid10(4), spareset(5), failedset(6), unknown(7)  

cpqSMAStorageSetSize 1.3.6.1.4.1.232.151.100.6.1.1.4
Storageset Size. This is the size of the storagset disk in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so this value may differ from the advertised size of a drive.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMAStorageSetPolicy 1.3.6.1.4.1.232.151.100.6.1.1.5
The StorageSet Policy switch. Sets the selection criteria the contoller uses to choose a replacement disk from the spareset. This policy only pertains to MIRRORSETs and RAIDSETs. For the other types it will be set to unknown.
OBJECT-TYPE    
  INTEGER best-fit(1), best-performance(2), nopolicy(3), unknown(4)  

cpqSMAStorageSetReconstruct 1.3.6.1.4.1.232.151.100.6.1.1.6
The StorageSet Reconstruct switch. Sets the speed at which the contoller reconstructs data ti a new RAIDset disk that replaces the failed disk. This policy only pertains to RAIDSETs. For the other types it will be set to unknown.
OBJECT-TYPE    
  INTEGER fast(1), normal(2), unknown(3)  

cpqSMAStorageSetCopy 1.3.6.1.4.1.232.151.100.6.1.1.7
The StorageSet Copy switch. Sets the speed at which the controller copies data to a new member from normal mirrorset members when data is being mirrored to the storageset's disk drives. This policy only pertains to MIRRORSETs. For the other types it will be set to unknown.
OBJECT-TYPE    
  INTEGER fast(1), normal(2), unknown(3)  

cpqSMAStorageSetReadSource 1.3.6.1.4.1.232.151.100.6.1.1.8
The Storageset ReadSource switch. Selects the mirrorset member used by the controller to satisfy a read request. The values will be either - disk-name (name of the specific member to which you want the controller to direct all read requests) - least-busy - round-robin This policy only pertains to MIRRORSETs. For the other types it will be set to unknown.
OBJECT-TYPE    
  DisplayString  

cpqSMAStorageSetAutospare 1.3.6.1.4.1.232.151.100.6.1.1.9
The StorageSet Autospare switch. With autospare enabled on a failedset, any new disk drive that is inserted into the PTL location of a failed dusk drive is automatically initialized and placed into the spareset. This policy only pertains to FAILEDSET. For the other types it will be set to unknown.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), unknown(3)  

cpqSMAStorageSetChunkSize 1.3.6.1.4.1.232.151.100.6.1.1.10
The StorageSet ChunkSize switch. Specify a chunk size to control the stripesize used for RAIDsets and stripesets in blocks. This policy only pertains to RAIDSETs and STRIPESETs. For the other types it will be set to zero.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAStorageSetNoOfDisks 1.3.6.1.4.1.232.151.100.6.1.1.11
The number of the physical disks that was used to create this StorageSet.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAStorageSetDisksIndex 1.3.6.1.4.1.232.151.100.6.1.1.12
The indexes of the physical disks from which this StorageSet was created. Each index is seperated by a ':' .
OBJECT-TYPE    
  DisplayString  

cpqSMAStorageSetState 1.3.6.1.4.1.232.151.100.6.1.1.13
Storageset State. Indicates whether a lun has been created from the storageset.
OBJECT-TYPE    
  INTEGER free(1), assigned(2), unknown(3)  

cpqSMAStorageSetUsedByIndex 1.3.6.1.4.1.232.151.100.6.1.1.14
Storageset Used by index. This is the index of the lun or snapshot that was created from this storageset. If the storageset is unassigned or free ie. cpqSMAStorageSetState = 1 then the index is of the this controller. If the storageset has multiple (>1) partitions then the value is -1.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAStorageSetNoofPartitions 1.3.6.1.4.1.232.151.100.6.1.1.15
The number of partitions on this Storageset.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAStorageSetSubsystemIndex 1.3.6.1.4.1.232.151.100.6.1.1.16
The index of the subsystem where this storageset resides.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMAStorageSetUsedByType 1.3.6.1.4.1.232.151.100.6.1.1.17
Storageset Used by index. This tells us whether the type of disk created from this storageset is a lun or a snapshot. ie. if cpqSMAStorageSetState = 2 (assigned) then this tells you the type (lun or snapshot) and cpqSMAStorageSetUsedByIndex gives the index of that object.
OBJECT-TYPE    
  INTEGER lun(1), snapshot(2)  

cpqSMAPartitionTable 1.3.6.1.4.1.232.151.100.7.1
The table of Partitions
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMAPartitionEntry

cpqSMAPartitionEntry 1.3.6.1.4.1.232.151.100.7.1.1
A table entry for a Partition
OBJECT-TYPE    
  CpqSMAPartitionEntry  

cpqSMAPartitionIndex 1.3.6.1.4.1.232.151.100.7.1.1.1
The Partition index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPartitionName 1.3.6.1.4.1.232.151.100.7.1.1.2
The name of the Partition.
OBJECT-TYPE    
  DisplayString  

cpqSMAPartitionNumber 1.3.6.1.4.1.232.151.100.7.1.1.3
The Partition number
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPartitionDeviceIndex 1.3.6.1.4.1.232.151.100.7.1.1.4
The Partition Device Index. This is the index of the device (physical) or storageset (logical) from which this partition was created.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPartitionState 1.3.6.1.4.1.232.151.100.7.1.1.5
The Partition number
OBJECT-TYPE    
  INTEGER free(1), assigned(2), unknown(3)  

cpqSMAPartitionUsedByIndex 1.3.6.1.4.1.232.151.100.7.1.1.6
The Partition Used By Index. This is the index of the lun that was created from this partition. If the parition is unassigned or free ie. cpqSMAPartitionDeviceState = 1 then the index is of the this controller.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAPartitionSize 1.3.6.1.4.1.232.151.100.7.1.1.7
Partition Size. This is the size of the partition in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities so this value may differ from the advertised size of a drive.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMAPartitionType 1.3.6.1.4.1.232.151.100.7.1.1.8
The type of Partition. If its a partition created from a device(disk) its a physical partition if its created from a storageset then its a logical partition.
OBJECT-TYPE    
  INTEGER physical(1), logical(2)  

cpqSMAPartitionSubsystemIndex 1.3.6.1.4.1.232.151.100.7.1.1.9
The index of the subsystem where this partition resides.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMAConnectionTable 1.3.6.1.4.1.232.151.100.8.1
The table of Connections
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMAConnectionEntry

cpqSMAConnectionEntry 1.3.6.1.4.1.232.151.100.8.1.1
A table entry for a Connection
OBJECT-TYPE    
  CpqSMAConnectionEntry  

cpqSMAConnectionIndex 1.3.6.1.4.1.232.151.100.8.1.1.1
The Connection index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAConnectionName 1.3.6.1.4.1.232.151.100.8.1.1.2
The name of the Connection.
OBJECT-TYPE    
  DisplayString  

cpqSMAConnectionOSName 1.3.6.1.4.1.232.151.100.8.1.1.3
The Operating System name.
OBJECT-TYPE    
  DisplayString  

cpqSMAConnectionController 1.3.6.1.4.1.232.151.100.8.1.1.4
The instance of the controller to which there is a connection.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAConnectionControllerPortNumber 1.3.6.1.4.1.232.151.100.8.1.1.5
The port number on the controller to which there is a connection.
OBJECT-TYPE    
  INTEGER 1..2  

cpqSMAConnectionStatus 1.3.6.1.4.1.232.151.100.8.1.1.6
The status of connection.
OBJECT-TYPE    
  INTEGER online(1), offline(2), unknown(3)  

cpqSMAConnectionOnlineTo 1.3.6.1.4.1.232.151.100.8.1.1.7
The instance of the controller to which it is online.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAConnectionLunOffset 1.3.6.1.4.1.232.151.100.8.1.1.8
The LUN offset for this connection.
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMAConnectionHostID 1.3.6.1.4.1.232.151.100.8.1.1.9
The HOST ID.
OBJECT-TYPE    
  DisplayString  

cpqSMAConnectionAdapterID 1.3.6.1.4.1.232.151.100.8.1.1.10
The Adapter ID.
OBJECT-TYPE    
  DisplayString  

cpqSMAConnectionUnitAddress 1.3.6.1.4.1.232.151.100.8.1.1.11
The Unit Address.
OBJECT-TYPE    
  DisplayString  

cpqSMAConnectionSubsystemIndex 1.3.6.1.4.1.232.151.100.8.1.1.12
The index of the subsystem where this connection exists.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMASnapshotTable 1.3.6.1.4.1.232.151.100.9.1
The table of Snapshots
OBJECT-TYPE    
  SEQUENCE OF  
    CpqSMASnapshotEntry

cpqSMASnapshotEntry 1.3.6.1.4.1.232.151.100.9.1.1
A table entry for a Snapshot
OBJECT-TYPE    
  CpqSMASnapshotEntry  

cpqSMASnapshotIndex 1.3.6.1.4.1.232.151.100.9.1.1.1
The Snapshot index
OBJECT-TYPE    
  INTEGER 1..10000  

cpqSMASnapshotName 1.3.6.1.4.1.232.151.100.9.1.1.2
The name of the Snapshot.
OBJECT-TYPE    
  DisplayString  

cpqSMASnapshotSize 1.3.6.1.4.1.232.151.100.9.1.1.3
Snapshot Drive Size. This is the size of the snapshot in blocks. One block equals 512 bytes (1 block = 512 bytes).
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMASnapshotCreatedFromIndex 1.3.6.1.4.1.232.151.100.9.1.1.4
Snapshot Created From Instance. This gives us the instance of the storageset from which this snapshot was created.
OBJECT-TYPE    
  INTEGER  

cpqSMASnapshotOf 1.3.6.1.4.1.232.151.100.9.1.1.5
This is the instance of the logical disk for which this is a snapshot.
OBJECT-TYPE    
  INTEGER  

cpqSMASnapshotState 1.3.6.1.4.1.232.151.100.9.1.1.6
Snapshot State. The state of the snapshot.
OBJECT-TYPE    
  INTEGER online(1), available(2), unknown(3)  

cpqSMASnapshotPreferredPath 1.3.6.1.4.1.232.151.100.9.1.1.7
Snapshot PreferredPath. May be set only when dual redundant controllers are operating in a multiple-bus failover configuration.
OBJECT-TYPE    
  INTEGER this(1), other(2), none(3)  

cpqSMASnapshotHostAccess 1.3.6.1.4.1.232.151.100.9.1.1.8
Snapshot Host Access. Specifies the access path.
OBJECT-TYPE    
  DisplayString  

cpqSMASnapshotIdentifier 1.3.6.1.4.1.232.151.100.9.1.1.9
Snapshot ID This ID consists of the controller node ID plus a 64-bit unit ID generated by the subsystem.
OBJECT-TYPE    
  DisplayString  

cpqSMASnapshotHeads 1.3.6.1.4.1.232.151.100.9.1.1.10
Number of Heads.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMASnapshotCylinders 1.3.6.1.4.1.232.151.100.9.1.1.11
Number of Cylinders.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMASnapshotSectors 1.3.6.1.4.1.232.151.100.9.1.1.12
Number of Sectors.
OBJECT-TYPE    
  INTEGER 0..2147483647  

cpqSMASnapshotControllerInstance 1.3.6.1.4.1.232.151.100.9.1.1.13
Snapshot Controller Instance. This gives us the instance of the controller to which this snapshot is online.
OBJECT-TYPE    
  INTEGER 0..10000  

cpqSMASnapshotIdentifierSwitch 1.3.6.1.4.1.232.151.100.9.1.1.14
Snapshot Identifier switch. This is used with the SCSI-VERSION switch when the SCSI version is set to SCSI-3 mode. The IDENTIFIER switch creates a unique unit identifier makes the unit visible to the host.This number can be a value between 1-9999. The value 0 means NOIDENTIFIER.
OBJECT-TYPE    
  INTEGER 0..9999  

cpqSMASnapshotSubsystemIndex 1.3.6.1.4.1.232.151.100.9.1.1.15
The index of the subsystem where this snapshot resides.
OBJECT-TYPE    
  INTEGER 0..10000