CORIANT-GROOVE-MIB

File: CORIANT-GROOVE-MIB.mib (575890 bytes)

Imported modules

SNMPv2-SMI

SNMPv2-TC

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
enterprises	Counter64	Unsigned32
TEXTUAL-CONVENTION	DateAndTime	DisplayString
TruthValue	RowStatus	RowPointer

Defined Types

CoriantCommonOtnEncryStatusEnum
NULL
TEXTUAL-CONVENTION
	BITS	notAvailable(0), handshake(1), keyInitializing(2), keyInSync(3), unreachable(4), mismatch(5), connectFailed(6), disabled(7), encryptFail(8), encryptNormal(9), authenticationFailed(10), trafficSquelched(11)

CoriantCommonOtnKeySyncSession
Indicate the associated session for the ODU channel to synchronize keys.
TEXTUAL-CONVENTION
	OCTET STRING

CoriantCommonpmThresholdValue
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..32)

CoriantCommonpmUnitOfValue
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), dbm(1), microseconds(2), ps(3), psNm(4), db(5), seconds(6), packets(7), events(8), octets(9), bits(10), bitsS(11), blocks(12), times(13), percentage(14), bitRatio(15), mhz(16), degreec(17), frames(18)

CoriantFileSwTypesDeviceFwVersion
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..64)

CoriantFileSwTypesDeviceName
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..64)

CoriantFileSwTypesSwVersion
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..20)

CoriantFileSwTypesSwloadProduct
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..32)

CoriantFileSwTypesSwloadVendor
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..32)

CoriantFmtypesConditionType
NULL
TEXTUAL-CONVENTION
	INTEGER	idp(1), rupDeg(2), rupFail(3), meaHwvm(4), mea(5), pwra(6), pwrb(7), rupMiss(8), sbanr(9), sdf(10), thermal(11), sdcardmiss(12), sdcardfail(13), mgmtrst(14), progflt(15), ntppu(16), linkdown(17), los(18), lol(19), lofOtu(20), lomOtu(21), timOtu(22), bdiOtu(23), bersdOtu(24), aisOtu(25), bersdOdu(26), lckOdu(27), ociOdu(28), aisOdu(29), bdiOdu(30), timOdu(31), plmOdu(32), loomfi(33), msim(34), loflom(35), csfOpu(36), losync(37), lf(38), rf(39), csfLosGfp(40), csfLosyncGfp(41), csfFdiGfp(42), csfRdiGfp(43), lofdGfp(44), plmGfp(45), lpbkfacility(46), lpbkfterm(47), contcom(48), latchOpen(49), lof(50), aisL(51), msAis(52), timR(53), rsTim(54), rfiL(55), msRfi(56), cabs(99), oog(100), connectFail(101), encryptFail(102), keyexFail(103), bdi(104), bdiO(105), autoshutoff(106), fibrconnMiss(107), bdiP(108), losMsa(109), protna(110), switchThres(111), losyncCd(112), updatePskFail(113), encTrafficSquelch(114), tSe(10001), tDropevents(10002), tOctets(10003), tPkts(10004), tBroadcastpkts(10005), tMulticastpkts(10006), tCrcalignerrors(10007), tUndersizepkts(10008), tOversizepkts(10009), tFragments(10010), tJabbers(10011), tPkts64octets(10012), tPkts65to127octets(10013), tPkts128to255octets(10014), tPkts256to511octets(10015), tPkts512to1023octets(10016), tPkts1024to1518octets(10017), tUtilHt(10018), tBeFec(10019), tUbeFec(10020), tBerFecHt(10021), tEbOtu(10022), tEsOtu(10023), tSesOtu(10024), tUasOtu(10025), tEbOdu(10026), tEsOdu(10027), tSesOdu(10028), tUasOdu(10029), tDelayOduHt(10030), tDelayOduLt(10031), tDgdHt(10032), tCdLt(10033), tCdHt(10034), tOsnrLt(10035), tLoss(10036), tOprHt(10037), tOprLt(10038), tQfactorLt(10039), tOptHt(10040), tOptLt(10041), tPdlHt(10042), tOftHt(10043), tOftLt(10044), tOfrHt(10045), tOfrLt(10046), tCvS(10047), tEsS(10048), tSesS(10049), tUasS(10050), tSefs(10051), tBbeRs(10052), tEsRs(10053), tSesRs(10054), tUasRs(10055), tOfs(10056), tOprLaneHt(10057), tOprLaneLt(10058), tOprTotalHt(10059), tOprTotalLt(10060), tOptLaneHt(10061), tOptLaneLt(10062), tOptTotalHt(10063), tOptTotalLt(10064), tLossTx(10065), tLossRx(10066), init(11001), swupgCompld(11002), swupgFail(11003), swupgRollback(11004), upgCompld(11005), upgFail(11006), intrusion(11007), userlock(11008), swupgIp(11009), ztcFail(11010), ztcComplete(11011), dbactFail(11012), inactive(11013), restart(11014), fstoprot(11015), fstowkg(11016), lockout(11017), mantoprot(11018), mantowkg(11019), noreq(11020), sdonprot(11021), sdonwkg(11022), sfonprot(11023), sfonwkg(11024), wkswpr(11025), prswwk(11026), wtr(11027), dnr(11028), authnFailed(11029), loginFailed(11030), candidatePskMismatch(11031), updatePskCompld(11032), candidatePskAuthenticated(11033), updatePskReqRcv(11034)

CoriantFmtypesEntityTypeFm
NULL
TEXTUAL-CONVENTION
	INTEGER	t10gbe(1), t40gbe(2), t100gbe(3), ochOs(4), otu4(5), otuc2(6), otuc3(7), oduc2(8), oduc3(9), odu4(10), odu3(11), odu2e(12), odu2(13), shelf(14), slot(15), port(16), fan(17), chm1(18), chm2(19), bfm(20), mgteth(21), ntppeer(22), db(23), sw(24), log(25), security(26), psu(27), cfp2(28), qsfp(29), time(30), user(31), ztc(32), ppp(33), fc8g(34), fc16g(35), oduflex(36), otu2(37), otu2e(38), oc192(39), stm64(40), oms(41), gopt(42), paoscofp2(43), pabaofp2(44), pairofp2(45), palrofp2(46), paerofp2(47), bahofp2(48), subslot(50), occ2(51), omd96(52), amplifier(53), omd48S(54), omd48O(55), chm1g(56), tdcmofp2(57), bauofp2(58), paulrofp2(59), osc(60), ots(61), sfpplus(62), xtm2(63), omd8b1ofp2(64), omd8b2ofp2(65), opsofp2(66), ops(67), chm1lh(68), chm2lh(69), t10gwanSonet(70), t10gwanSdh(71), otdrofp2(72)

CoriantFmtypesServiceAffectFm
SA: service affecting NSA: non-service affecting
TEXTUAL-CONVENTION
	INTEGER	sa(1), nsa(2)

CoriantFmtypesSeverityLevel
alarm severity
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), critical(1), major(2), minor(3), notAlarmed(4), notReported(5), cleared(6)

CoriantPmtypesPmParameter
NULL
TEXTUAL-CONVENTION
	INTEGER	all(0), eb(1), es(2), ses(3), uas(4), delay(5), delayMax(6), delayMin(7), dgd(8), dgdMax(9), dgdMin(10), cd(11), cdMax(12), cdMin(13), osnr(14), osnrMax(15), osnrMin(16), qFactor(17), qFactorMax(18), qFactorMin(19), opr(20), oprMax(21), oprMin(22), loss(23), se(24), dropevents(25), octets(26), pkts(27), broadcastpkts(28), multicastpkts(29), crcalignerrors(30), undersizepkts(31), oversizepkts(32), fragments(33), jabbers(34), pkts64octets(35), pkts65to127octets(36), pkts128to255octets(37), pkts256to511octets(38), pkts512to1023octets(39), pkts1024to1518octets(40), utilization(41), utilizationMax(42), utilizationMin(43), beFec(44), ubeFec(45), berFec(46), berFecMax(47), berFecMin(48), opt(49), optMax(50), optMin(51), pdl(52), pdlMax(53), pdlMin(54), oft(55), oftMax(56), oftMin(57), ofr(58), ofrMax(59), ofrMin(60), bbe(61), ofs(65), cv(66), sefs(67), oprLaneHigh(68), oprLaneHighMax(69), oprLaneHighMin(70), oprLaneLow(71), oprLaneLowMax(72), oprLaneLowMin(73), oprTotal(74), oprTotalMax(75), oprTotalMin(76), optLaneHigh(77), optLaneHighMax(78), optLaneHighMin(79), optLaneLow(80), optLaneLowMax(81), optLaneLowMin(82), optTotal(83), optTotalMax(84), optTotalMin(85), tmodule(86), tinlet(87), toutlet(88), tmoduleMax(89), tmoduleMin(90), tinletMax(91), tinletMin(92), toutletMax(93), toutletMin(94), berPostFec(95), berPostFecMax(96), berPostFecMin(97), psd(98), psc(99), lossTx(100), lossRx(101), encryptionFailRx(102)

CoriantPmtypesPmpType
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), oduNendEgress(1), oduNendIngress(2), otuNendIngress(3), delayMeasurementOdu(4), coherentOpticalInterface(5), opticalPower(6), loss(7), ethernetNendIngress(8), ethernetNendEgress(9), fec(10), fcNendIngress(11), sonetSNendIngress(12), sdhRsNendIngress(13), sonetSNendEgress(14), sdhRsNendEgress(15), shelfTemperature(16), equipmentTemperature(17), opticalPowerLane(18), protectionSwitch(19), lossTxrx(20), opticalPowerIngress(21), opticalPowerEgress(22), oduEncryption(23), all(100)

CoriantPmtypesValidityType
NULL
TEXTUAL-CONVENTION
	INTEGER	complete(1), partial(2), notAvailable(3)

CoriantRpcConfigurableLedTypes
Types of LEDs that can be enabled/disabled by the user.
TEXTUAL-CONVENTION
	INTEGER	ledTest(1), locationLed(2)

CoriantTypesCardType
NULL
TEXTUAL-CONVENTION
	INTEGER	fan(11), psu(12), chm1(13), chm2(14), xtm2(16), chm1g(17), chm1lh(18), chm2lh(19), occ2(100), omd96(101), paoscofp2(102), pabaofp2(103), pairofp2(104), palrofp2(105), paerofp2(106), bahofp2(107), omd48S(109), omd48O(110), tdcmofp2(111), bauofp2(112), paulrofp2(113), omd8b1ofp2(114), omd8b2ofp2(115), opsofp2(116), otdrofp2(117)

CoriantTypesCreationscope
NULL
TEXTUAL-CONVENTION
	INTEGER	systemCreated(0), userCreated(1)

CoriantTypesDBPrecision1
dB for 0.1 precision UNITS:dB
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesDate
The type of date show the mm/dd/year. The date type does not allow negative years
TEXTUAL-CONVENTION
	OCTET STRING	Size(0|10)

CoriantTypesDecimalFract1
NULL
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesDuplexMode
NULL
TEXTUAL-CONVENTION
	INTEGER	na(0), full(1), half(2)

CoriantTypesEnableSwitch
NULL
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2)

CoriantTypesEquipmentType
NULL
TEXTUAL-CONVENTION
	INTEGER	empty(0), filled(1), reserved(2), unrecognized(3), fan(11), psu(12), chm1(13), chm2(14), bfm(15), xtm2(16), chm1g(17), chm1lh(18), chm2lh(19), qsfp(21), cfp2(22), sfpplus(23), occ2(100), omd96(101), paoscofp2(102), pabaofp2(103), pairofp2(104), palrofp2(105), paerofp2(106), bahofp2(107), omd48S(109), omd48O(110), tdcmofp2(111), bauofp2(112), paulrofp2(113), omd8b1ofp2(114), omd8b2ofp2(115), opsofp2(116), otdrofp2(117)

CoriantTypesEthFec
NULL
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2), auto(3)

CoriantTypesEthernetRate
NULL UNITS:Mbit/s
TEXTUAL-CONVENTION
	INTEGER	na(0), t10(1), t100(2), t1000(3), maxRate(4)

CoriantTypesFilename
String representing a filename
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..128)

CoriantTypesFlowControl
NULL
TEXTUAL-CONVENTION
	INTEGER	na(0), off(1), txRx(2), tx(3), rx(4)

CoriantTypesFreq
Supported Frequency Range. UNITS:MHz
TEXTUAL-CONVENTION
	Unsigned32	0 | 191300000..196111250

CoriantTypesFtpPath
Representation of a FTP/STPF/FTPS/SCP path 'ftp://user@hostname/directorypath/filename' or an HTTP URL 'http://domain.com/filename'
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..1024)

CoriantTypesManagementDirection
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), ingress(1), egress(2)

CoriantTypesManagementLocation
NULL
TEXTUAL-CONVENTION
	INTEGER	nearEnd(1), farEnd(2), notApplicable(3)

CoriantTypesManagementTimePeriod
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), t15min(1), t24h(2), all(4), t1min(5), t1h(6)

CoriantTypesNameIdentifier
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..32)

CoriantTypesNumberList
List of numbers using ',' as separator and '..' to represent ranges. Examples: '12' , '1..4' , '1,5,10..12,20'
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..255)

CoriantTypesOduType
NULL
TEXTUAL-CONVENTION
	INTEGER	unused(0), odu0(1), odu1(2), odu2(3), odu2e(4), odu3(5), odu3e(6), odu4(7), oduflex(8), oduc2(9), oduc3(10)

CoriantTypesOnOff
NULL
TEXTUAL-CONVENTION
	INTEGER	on(1), off(2)

CoriantTypesOpticalDB
Optical Attribute value with Unit dB UNITS:dB
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesOpticalPower
Optical Power value in dBm UNITS:dBm
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesOtukFec
NULL
TEXTUAL-CONVENTION
	INTEGER	sdfec15(1), sdfec25(2), g709(3), i4(4), i7(5), nofec(6), staircase7(7), sdfec15nd(8)

CoriantTypesPassword
Any ASCII values between 32 and 126 decimal
TEXTUAL-CONVENTION
	OCTET STRING	Size(8..32)

CoriantTypesPercentage
NULL UNITS:%
TEXTUAL-CONVENTION
	Unsigned32	0..100

CoriantTypesPluggableFormFactor
Indicating the exact form factor of the pluggable.
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), unrecognized(1), qsfpplus(2), qsfp28(3), cfp2Aco(4), sfpplus(5), sfp(6), xfp(7)

CoriantTypesPluggableType
NULL
TEXTUAL-CONVENTION
	INTEGER	qsfp(21), cfp2(22), sfpplus(23)

CoriantTypesPortId
NULL
TEXTUAL-CONVENTION
	Unsigned32

CoriantTypesPortMode
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), t10gbe(1), t40gbe(2), t100gbe(3), subport(4), qpsk100g(5), t8qam300g(6), t16qam200g(7), fc16g(8), fc8g(9), otu4(10), otu2(12), otu2e(13), oc192(14), stm64(15), ochosOtu2(16), ochosOtu2e(17), t8qam200g(18), t10gwanSonet(19), t10gwanSdh(20)

CoriantTypesPower
Power consumption value in W(WAT) UNITS:W
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesRtpType
Type of the routing protocol.
TEXTUAL-CONVENTION
	INTEGER	direct(1), static(2), ospfv2(3)

CoriantTypesSessionId
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..21)

CoriantTypesShelfId
NULL
TEXTUAL-CONVENTION
	Unsigned32	1..65535

CoriantTypesSlotId
NULL
TEXTUAL-CONVENTION
	Unsigned32

CoriantTypesSnmpString
NULL
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..32)

CoriantTypesSourceProtocol
NULL
TEXTUAL-CONVENTION
	INTEGER	direct(1), static(2), ospfv2(3)

CoriantTypesSubslotId
NULL
TEXTUAL-CONVENTION
	Unsigned32

CoriantTypesTemperature
Temperature value in degree Celsius. UNITS:Celsius
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesTemperaturePrecision3
Temperature value in Celsius with 0.001 precision UNITS:Celsius
TEXTUAL-CONVENTION
	OCTET STRING

CoriantTypesTestSignalConfig
NULL
TEXTUAL-CONVENTION
	INTEGER	none(0), rxtx(3)

CoriantTypesTestSignalType
NULL
TEXTUAL-CONVENTION
	INTEGER	none(0), prbs(1), idle(3)

CoriantTypesTimMode
NULL
TEXTUAL-CONVENTION
	INTEGER	none(0), sapi(1), dapi(2), oper(3), sapiDapi(4), sapiOper(5), dapiOper(6), sapiDapiOper(7)

CoriantTypesTimePeriod
Representation of a time period in 'hh:mm:ss'
TEXTUAL-CONVENTION
	OCTET STRING	Size(8)

CoriantTypesTypeOfDirection
NULL
TEXTUAL-CONVENTION
	INTEGER	notApplicable(0), tx(2), rx(3), rxtx(4)

CoriantTypesUserName
According with Linux user-name pattern
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..20)

CoriantTypesYesNo
NULL
TEXTUAL-CONVENTION
	INTEGER	yes(1), no(2)

IetfInetTypesAsNumber
The as-number type represents autonomous system numbers which identify an Autonomous System (AS). An AS is a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASes. IANA maintains the AS number space and has delegated large parts to the regional registries. Autonomous system numbers were originally limited to 16 bits. BGP extensions have enlarged the autonomous system number space to 32 bits. This type therefore uses an uint32 base type without a range restriction in order to support a larger autonomous system number space. In the value set and its semantics, this type is equivalent to the InetAutonomousSystemNumber textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfInetTypesDomainName
The domain-name type represents a DNS domain name. The name SHOULD be fully qualified whenever possible. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. The description clause of schema nodes using the domain-name type MUST describe when and how these names are resolved to IP addresses. Note that the resolution of a domain-name value may require to query multiple DNS records (e.g., A for IPv4 and AAAA for IPv6). The order of the resolution process and which DNS record takes precedence can either be defined explicitly or may depend on the configuration of the resolver. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be A-labels as per RFC 5890.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..253)

IetfInetTypesDscp
The dscp type represents a Differentiated Services Code Point that may be used for marking packets in a traffic stream. In the value set and its semantics, this type is equivalent to the Dscp textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32	0..63

IetfInetTypesHost
The host type represents either an IP address or a DNS domain name.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpAddress
The ip-address type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type supports scoped addresses by allowing zone identifiers in the address format.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpAddressNoZone
The ip-address-no-zone type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type does not support scoped addresses since it does not allow zone identifiers in the address format.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpPrefix
The ip-prefix type represents an IP prefix and is IP version neutral. The format of the textual representations implies the IP version.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpVersion
This value represents the version of the IP protocol. In the value set and its semantics, this type is equivalent to the InetVersion textual convention of the SMIv2.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), ipv4(1), ipv6(2)

IetfInetTypesIpv4Address
The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpv4AddressNoZone
An IPv4 address without a zone index. This type, derived from ipv4-address, may be used in situations where the zone is known from the context and hence no zone index is needed.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpv4Prefix
The ipv4-prefix type represents an IPv4 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 32. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv4 prefix has all bits of the IPv4 address set to zero that are not part of the IPv4 prefix.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpv6Address
The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpv6AddressNoZone
An IPv6 address without a zone index. This type, derived from ipv6-address, may be used in situations where the zone is known from the context and hence no zone index is needed.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesIpv6FlowLabel
The ipv6-flow-label type represents the flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. In the value set and its semantics, this type is equivalent to the IPv6FlowLabel textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32	0..1048575

IetfInetTypesIpv6Prefix
The ipv6-prefix type represents an IPv6 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The IPv6 address should have all bits that do not belong to the prefix set to zero. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952.
TEXTUAL-CONVENTION
	OCTET STRING

IetfInetTypesPortNumber
The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP. Port numbers are assigned by IANA. A current list of all assignments is available from . Note that the port number value zero is reserved by IANA. In situations where the value zero does not make sense, it can be excluded by subtyping the port-number type. In the value set and its semantics, this type is equivalent to the InetPortNumber textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32	0..65535

IetfInetTypesUri
The uri type represents a Uniform Resource Identifier (URI) as defined by STD 66. Objects using the uri type MUST be in US-ASCII encoding, and MUST be normalized as described by RFC 3986 Sections 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary percent-encoding is removed, and all case-insensitive characters are set to lowercase except for hexadecimal digits, which are normalized to uppercase as described in Section 6.2.2.1. The purpose of this normalization is to help provide unique URIs. Note that this normalization is not sufficient to provide uniqueness. Two URIs that are textually distinct after this normalization may still be equivalent. Objects using the uri type may restrict the schemes that they permit. For example, 'data:' and 'urn:' schemes might not be appropriate. A zero-length URI is not a valid URI. This can be used to express 'URI absent' where required. In the value set and its semantics, this type is equivalent to the Uri SMIv2 textual convention defined in RFC 5017.
TEXTUAL-CONVENTION
	OCTET STRING

IetfNetconfAcmAccessOperationsType
NETCONF Access Operation.
TEXTUAL-CONVENTION
	BITS	create(0), read(1), update(2), delete(3), exec(4)

IetfNetconfAcmActionType
Action taken by the server when a particular rule matches.
TEXTUAL-CONVENTION
	INTEGER	permit(0), deny(1)

IetfNetconfAcmGroupNameType
Name of administrative group to which users can be assigned.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..65535)

IetfNetconfAcmMatchallStringType
The string containing a single asterisk '*' is used to conceptually represent all possible values for the particular leaf using this data type.
TEXTUAL-CONVENTION
	OCTET STRING

IetfNetconfAcmNodeInstanceIdentifier
Path expression used to represent a special data node instance identifier string. A node-instance-identifier value is an unrestricted YANG instance-identifier expression. All the same rules as an instance-identifier apply except predicates for keys are optional. If a key predicate is missing, then the node-instance-identifier represents all possible server instances for that key. This XPath expression is evaluated in the following context: o The set of namespace declarations are those in scope on the leaf element where this type is used. o The set of variable bindings contains one variable, 'USER', which contains the name of the user of the current session. o The function library is the core function library, but note that due to the syntax restrictions of an instance-identifier, no functions are allowed. o The context node is the root node in the data tree.
TEXTUAL-CONVENTION
	OCTET STRING

IetfNetconfAcmUserNameType
General Purpose Username string.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..65535)

IetfNetconfEditOperationType
NETCONF 'operation' attribute values
TEXTUAL-CONVENTION
	INTEGER	merge(0), replace(1), create(2), delete(3), remove(4)

IetfNetconfErrorSeverityType
NETCONF Error Severity
TEXTUAL-CONVENTION
	INTEGER	error(0), warning(1)

IetfNetconfErrorTagType
NETCONF Error Tag
TEXTUAL-CONVENTION
	INTEGER	inUse(0), invalidValue(1), tooBig(2), missingAttribute(3), badAttribute(4), unknownAttribute(5), missingElement(6), badElement(7), unknownElement(8), unknownNamespace(9), accessDenied(10), lockDenied(11), resourceDenied(12), rollbackFailed(13), dataExists(14), dataMissing(15), operationNotSupported(16), operationFailed(17), partialOperation(18), malformedMessage(19)

IetfNetconfSessionIdOrZeroType
NETCONF Session Id or Zero to indicate none
TEXTUAL-CONVENTION
	Unsigned32

IetfNetconfSessionIdType
NETCONF Session Id
TEXTUAL-CONVENTION
	Unsigned32	1..4294967295

IetfNetconfWithDefaultsWithDefaultsMode
Possible modes to report default data.
TEXTUAL-CONVENTION
	INTEGER	reportAll(0), reportAllTagged(1), trim(2), explicit(3)

IetfYangTypesCounter32
The counter32 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Counters have no defined 'initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter32 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter32 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter32. In the value set and its semantics, this type is equivalent to the Counter32 type of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfYangTypesCounter64
The counter64 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Counters have no defined 'initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of a schema node using this type. If such other times can occur, for example, the creation of a schema node of type counter64 at times other than re-initialization, then a corresponding schema node should be defined, with an appropriate type, to indicate the last discontinuity. The counter64 type should not be used for configuration schema nodes. A default statement SHOULD NOT be used in combination with the type counter64. In the value set and its semantics, this type is equivalent to the Counter64 type of the SMIv2.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesDateAndTime
The date-and-time type is a profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar. The profile is defined by the date-time production in Section 5.6 of RFC 3339. The date-and-time type is compatible with the dateTime XML schema type with the following notable exceptions: (a) The date-and-time type does not allow negative years. (b) The date-and-time time-offset -00:00 indicates an unknown time zone (see RFC 3339) while -00:00 and +00:00 and Z all represent the same time zone in dateTime. (c) The canonical format (see below) of data-and-time values differs from the canonical format used by the dateTime XML schema type, which requires all times to be in UTC using the time-offset 'Z'. This type is not equivalent to the DateAndTime textual convention of the SMIv2 since RFC 3339 uses a different separator between full-date and full-time and provides higher resolution of time-secfrac. The canonical format for date-and-time values with a known time zone uses a numeric time zone offset that is calculated using the device's configured known offset to UTC time. A change of the device's offset to UTC time will cause date-and-time values to change accordingly. Such changes might happen periodically in case a server follows automatically daylight saving time (DST) time zone offset changes. The canonical format for date-and-time values with an unknown time zone (usually referring to the notion of local time) uses the time-offset -00:00.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesDottedQuad
An unsigned 32-bit number expressed in the dotted-quad notation, i.e., four octets written as decimal numbers and separated with the '.' (full stop) character.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesGauge32
The gauge32 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^32-1 (4294967295 decimal), and the minimum value cannot be smaller than 0. The value of a gauge32 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge32 also decreases (increases). In the value set and its semantics, this type is equivalent to the Gauge32 type of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfYangTypesGauge64
The gauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^64-1 (18446744073709551615), and the minimum value cannot be smaller than 0. The value of a gauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge64 also decreases (increases). In the value set and its semantics, this type is equivalent to the CounterBasedGauge64 SMIv2 textual convention defined in RFC 2856
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesHexString
A hexadecimal string with octets represented as hex digits separated by colons. The canonical representation uses lowercase characters.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesMacAddress
The mac-address type represents an IEEE 802 MAC address. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the MacAddress textual convention of the SMIv2.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesObjectIdentifier
The object-identifier type represents administratively assigned names in a registration-hierarchical-name tree. Values of this type are denoted as a sequence of numerical non-negative sub-identifier values. Each sub-identifier value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers are separated by single dots and without any intermediate whitespace. The ASN.1 standard restricts the value space of the first sub-identifier to 0, 1, or 2. Furthermore, the value space of the second sub-identifier is restricted to the range 0 to 39 if the first sub-identifier is 0 or 1. Finally, the ASN.1 standard requires that an object identifier has always at least two sub-identifiers. The pattern captures these restrictions. Although the number of sub-identifiers is not limited, module designers should realize that there may be implementations that stick with the SMIv2 limit of 128 sub-identifiers. This type is a superset of the SMIv2 OBJECT IDENTIFIER type since it is not restricted to 128 sub-identifiers. Hence, this type SHOULD NOT be used to represent the SMIv2 OBJECT IDENTIFIER type; the object-identifier-128 type SHOULD be used instead.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesObjectIdentifier128
This type represents object-identifiers restricted to 128 sub-identifiers. In the value set and its semantics, this type is equivalent to the OBJECT IDENTIFIER type of the SMIv2.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesPhysAddress
Represents media- or physical-level addresses represented as a sequence octets, each octet represented by two hexadecimal numbers. Octets are separated by colons. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the PhysAddress textual convention of the SMIv2.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesTimestamp
The timestamp type represents the value of an associated timeticks schema node at which a specific occurrence happened. The specific occurrence must be defined in the description of any schema node defined using this type. When the specific occurrence occurred prior to the last time the associated timeticks attribute was zero, then the timestamp value is zero. Note that this requires all timestamp values to be reset to zero when the value of the associated timeticks attribute reaches 497+ days and wraps around to zero. The associated timeticks schema node must be specified in the description of any schema node using this type. In the value set and its semantics, this type is equivalent to the TimeStamp textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfYangTypesTimeticks
The timeticks type represents a non-negative integer that represents the time, modulo 2^32 (4294967296 decimal), in hundredths of a second between two epochs. When a schema node is defined that uses this type, the description of the schema node identifies both of the reference epochs. In the value set and its semantics, this type is equivalent to the TimeTicks type of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfYangTypesUuid
A Universally Unique IDentifier in the string representation defined in RFC 4122. The canonical representation uses lowercase characters. The following is an example of a UUID in string representation: f81d4fae-7dec-11d0-a765-00a0c91e6bf6
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesXpath10
This type represents an XPATH 1.0 expression. When a schema node is defined that uses this type, the description of the schema node MUST specify the XPath context in which the XPath expression is evaluated.
TEXTUAL-CONVENTION
	OCTET STRING

IetfYangTypesYangIdentifier
A YANG identifier string as defined by the 'identifier' rule in Section 12 of RFC 6020. An identifier must start with an alphabetic character or an underscore followed by an arbitrary sequence of alphabetic or numeric characters, underscores, hyphens, or dots. A YANG identifier MUST NOT start with any possible combination of the lowercase or uppercase character sequence 'xml'.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..65535)

IetfYangTypesZeroBasedCounter32
The zero-based-counter32 type represents a counter32 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the 'initial' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter32 textual convention of the SMIv2.
TEXTUAL-CONVENTION
	Unsigned32

IetfYangTypesZeroBasedCounter64
The zero-based-counter64 type represents a counter64 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Provided that an application discovers a new schema node of this type within the minimum time to wrap, it can use the 'initial' value as a delta. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. In the value set and its semantics, this type is equivalent to the ZeroBasedCounter64 textual convention of the SMIv2.
TEXTUAL-CONVENTION
	OCTET STRING

KeySyncSessionCertificateRef
certificate to be referred to.
TEXTUAL-CONVENTION
	OCTET STRING

KeySyncSessionInterfaceRef
Interface to be referred to.
TEXTUAL-CONVENTION
	OCTET STRING

LldpLldpSysCap
NULL
TEXTUAL-CONVENTION
	BITS	other(0), repeater(1), bridge(2), wlanaccesspoint(3), router(4), telephone(5), docsiscabledevice(6), stationonly(7), cvlancomponent(8), svlancomponent(9), twoportmacrelay(10)

OpticalCommonSupportingPort
References one individual port, or no port at all
TEXTUAL-CONVENTION
	OCTET STRING

OtdrOtdrIor
NULL
TEXTUAL-CONVENTION
	OCTET STRING

OtdrOtdrPulseWidth
NULL
TEXTUAL-CONVENTION
	OCTET STRING

OtdrOtdrRange
NULL
TEXTUAL-CONVENTION
	OCTET STRING

AlarmProfileEntry
SEQUENCE
	alarmProfileId	Unsigned32

AlarmProfileENTREntry
SEQUENCE
	alarmProfileENTRConditionType	CoriantFmtypesConditionType
	alarmProfileENTRFmEntityType	CoriantFmtypesEntityTypeFm
	alarmProfileENTRTimePeriod	CoriantTypesManagementTimePeriod
	alarmProfileENTRSeverityLevelSa	CoriantFmtypesSeverityLevel
	alarmProfileENTRSeverityLevelNsa	CoriantFmtypesSeverityLevel

StandingConditionEntry
SEQUENCE
	standingConditionFmEntity	RowPointer
	standingConditionConditionType	CoriantFmtypesConditionType
	standingConditionLocation	CoriantTypesManagementLocation
	standingConditionDirection	CoriantTypesManagementDirection
	standingConditionTimePeriod	CoriantTypesManagementTimePeriod
	standingConditionServiceAffect	CoriantFmtypesServiceAffectFm
	standingConditionSeverityLevel	CoriantFmtypesSeverityLevel
	standingConditionOccurrenceDateTime	IetfYangTypesDateAndTime
	standingConditionConditionDescription	OCTET STRING
	standingConditionFmEntityType	CoriantFmtypesEntityTypeFm

ShelfEntry
SEQUENCE
	shelfId	CoriantTypesShelfId
	shelfLocation	OCTET STRING
	shelfInletTemperature	CoriantTypesTemperature
	shelfOutletTemperature	CoriantTypesTemperature
	shelfAdminStatus	INTEGER
	shelfOperStatus	INTEGER
	shelfAvailStatus	BITS
	shelfAliasName	OCTET STRING

SlotEntry
SEQUENCE
	slotId	CoriantTypesSlotId
	slotActualCardType	CoriantTypesEquipmentType
	slotPossibleCardTypes	OCTET STRING
	slotAdminStatus	INTEGER
	slotOperStatus	INTEGER
	slotAvailStatus	BITS
	slotAliasName	OCTET STRING

CardEntry
SEQUENCE
	cardRequiredType	CoriantTypesCardType
	cardEquipmentName	OCTET STRING
	cardAdminStatus	INTEGER
	cardOperStatus	INTEGER
	cardAvailStatus	BITS
	cardAliasName	OCTET STRING
	cardFanSpeedRate	CoriantTypesPercentage
	cardSwitchingType	INTEGER
	cardTemperature	CoriantTypesTemperature
	cardMode	INTEGER

SubslotEntry
SEQUENCE
	subslotId	CoriantTypesSlotId
	subslotActualCardType	CoriantTypesEquipmentType
	subslotPossibleCardTypes	OCTET STRING
	subslotAdminStatus	INTEGER
	subslotOperStatus	INTEGER
	subslotAvailStatus	BITS
	subslotAliasName	OCTET STRING

SubcardEntry
SEQUENCE
	subcardRequiredType	CoriantTypesCardType
	subcardEquipmentName	OCTET STRING
	subcardAdminStatus	INTEGER
	subcardOperStatus	INTEGER
	subcardAvailStatus	BITS
	subcardAliasName	OCTET STRING
	subcardTemperature	CoriantTypesTemperature

PortEntry
SEQUENCE
	portId	CoriantTypesPortId
	portPossiblePluggableTypes	OCTET STRING
	portActualPluggableType	CoriantTypesEquipmentType
	portRxOpticalPower	CoriantTypesOpticalPower
	portTxOpticalPower	CoriantTypesOpticalPower
	portRxOpticalPowerSelectedChannel	CoriantTypesOpticalPower
	portRxOpticalPowerLane1	CoriantTypesOpticalPower
	portRxOpticalPowerLane2	CoriantTypesOpticalPower
	portRxOpticalPowerLane3	CoriantTypesOpticalPower
	portRxOpticalPowerLane4	CoriantTypesOpticalPower
	portTxOpticalPowerLane1	CoriantTypesOpticalPower
	portTxOpticalPowerLane2	CoriantTypesOpticalPower
	portTxOpticalPowerLane3	CoriantTypesOpticalPower
	portTxOpticalPowerLane4	CoriantTypesOpticalPower
	portDirectionType	CoriantTypesTypeOfDirection
	portName	CoriantTypesNameIdentifier
	portType	INTEGER
	portMode	CoriantTypesPortMode
	portAdminStatus	INTEGER
	portOperStatus	INTEGER
	portAvailStatus	BITS
	portAliasName	OCTET STRING
	portServiceLabel	OCTET STRING
	portConnectedTo	OCTET STRING
	portArcConfig	INTEGER
	portArcState	INTEGER
	portArcSubState	INTEGER
	portArcTimer	Unsigned32
	portArcRemainingTime	OCTET STRING
	portExternalConnectivity	CoriantTypesYesNo

SubportEntry
SEQUENCE
	subportId	CoriantTypesPortId
	subportPortName	CoriantTypesNameIdentifier
	subportPortType	INTEGER
	subportPortMode	CoriantTypesPortMode
	subportAdminStatus	INTEGER
	subportOperStatus	INTEGER
	subportAvailStatus	BITS
	subportAliasName	OCTET STRING
	subportServiceLabel	OCTET STRING
	subportConnectedTo	OCTET STRING
	subportArcConfig	INTEGER
	subportArcState	INTEGER
	subportArcSubState	INTEGER
	subportArcTimer	Unsigned32
	subportArcRemainingTime	OCTET STRING
	subportRxOpticalPower	CoriantTypesOpticalPower
	subportTxOpticalPower	CoriantTypesOpticalPower
	subportExternalConnectivity	CoriantTypesYesNo

PluggableEntry
SEQUENCE
	pluggableRequiredType	CoriantTypesPluggableType
	pluggableFormFactor	CoriantTypesPluggableFormFactor
	pluggableInterfaceType	OCTET STRING
	pluggableLaserSource	INTEGER
	pluggableHwVersion	OCTET STRING
	pluggableVendor	OCTET STRING
	pluggableSerialNumber	OCTET STRING
	pluggableFwVersion	OCTET STRING
	pluggablePartNumber	OCTET STRING
	pluggableClei	OCTET STRING
	pluggableEquipmentName	OCTET STRING
	pluggableAdminStatus	INTEGER
	pluggableOperStatus	INTEGER
	pluggableAvailStatus	BITS
	pluggableAliasName	OCTET STRING
	pluggableTemperature	CoriantTypesTemperature

AmplifierEntry
SEQUENCE
	amplifierName	CoriantTypesNameIdentifier
	amplifierSupportingInputPort	RowPointer
	amplifierSupportingOutputPort	RowPointer
	amplifierAdminStatus	INTEGER
	amplifierOperStatus	INTEGER
	amplifierAvailStatus	BITS
	amplifierAliasName	OCTET STRING
	amplifierEnable	CoriantTypesEnableSwitch
	amplifierInputLosShutdown	CoriantTypesEnableSwitch
	amplifierControlMode	INTEGER
	amplifierMode	INTEGER
	amplifierType	INTEGER
	amplifierTargetGain	CoriantTypesOpticalDB
	amplifierOperatingGain	CoriantTypesOpticalDB
	amplifierGainAdjustment	CoriantTypesOpticalDB
	amplifierGainRangeMin	CoriantTypesOpticalDB
	amplifierGainRangeMax	CoriantTypesOpticalPower
	amplifierOutputPowerMon	CoriantTypesOpticalPower
	amplifierOutputPowerMonWithAse	CoriantTypesOpticalPower
	amplifierInputPowerMon	CoriantTypesOpticalPower
	amplifierOutputVoa	CoriantTypesOpticalDB
	amplifierPowerBeforeOutputVoa	CoriantTypesOpticalPower

TdcEntry
SEQUENCE
	tdcName	CoriantTypesNameIdentifier
	tdcSupportingInputPort	RowPointer
	tdcSupportingOutputPort	RowPointer
	tdcAdminStatus	INTEGER
	tdcOperStatus	INTEGER
	tdcAvailStatus	BITS
	tdcAliasName	OCTET STRING
	tdcMode	INTEGER
	tdcReferenceFrequency	CoriantTypesFreq
	tdcActualReferenceFrequency	Unsigned32
	tdcFrequencyRangeMin	Unsigned32
	tdcFrequencyRangeMax	Unsigned32
	tdcChromaticDispersion	INTEGER
	tdcChromaticDispersionAdjustment	INTEGER
	tdcActualChromaticDispersion	INTEGER
	tdcCdRangeMin	INTEGER
	tdcCdRangeMax	INTEGER

InventoryEntry
SEQUENCE
	inventoryEquipmentType	INTEGER
	inventoryShelfId	CoriantTypesShelfId
	inventorySlotId	CoriantTypesSlotId
	inventorySubslotId	CoriantTypesSlotId
	inventoryPortId	CoriantTypesPortId
	inventoryEquipmentVersion	OCTET STRING
	inventoryModuleType	OCTET STRING
	inventoryVendor	OCTET STRING
	inventorySerialNumber	OCTET STRING
	inventoryFwVersion	OCTET STRING
	inventoryPartNumber	OCTET STRING
	inventoryClei	OCTET STRING
	inventoryInterfaceType	OCTET STRING
	inventoryManufactureDate	OCTET STRING
	inventoryManufacturerNumber	OCTET STRING

LedEntry
SEQUENCE
	ledEquipmentType	OCTET STRING
	ledShelfId	CoriantTypesShelfId
	ledSlotId	CoriantTypesSlotId
	ledName	OCTET STRING
	ledStatus	INTEGER
	ledSubslotId	CoriantTypesSubslotId

TemperatureDetailsEntry
SEQUENCE
	temperatureDetailsMonitoringPoint	OCTET STRING
	temperatureDetailsTemperature	CoriantTypesTemperature
	temperatureDetailsTemperatureRangeLow	CoriantTypesTemperature
	temperatureDetailsTemperatureRangeHigh	CoriantTypesTemperature

OtdrEntry
SEQUENCE
	otdrState	INTEGER
	otdrMeasurementTime	Unsigned32
	otdrError	OCTET STRING
	otdrLaserStatus	INTEGER
	otdrMeasurementPort	Unsigned32

OtdrPortEntry
SEQUENCE
	otdrPortOtdrRange	OtdrOtdrRange
	otdrPortOtdrPulseWidth	OtdrOtdrPulseWidth
	otdrPortOtdrMeasurementSpeed	INTEGER
	otdrPortOtdrIor	OtdrOtdrIor
	otdrPortOtdrFiberType	INTEGER
	otdrPortOtdrLastMeasurement	IetfYangTypesDateAndTime
	otdrPortOtdrResolution	OCTET STRING

OpsEntry
SEQUENCE
	opsName	CoriantTypesNameIdentifier
	opsWorkingEntity	RowPointer
	opsProtectionEntity	RowPointer
	opsAdminStatus	INTEGER
	opsOperStatus	INTEGER
	opsAvailStatus	BITS
	opsAliasName	OCTET STRING
	opsProtectionStatus	INTEGER
	opsActivePath	INTEGER
	opsRevertive	CoriantTypesYesNo
	opsWaitToRestore	Unsigned32
	opsWorkingSwitchThreshold	CoriantTypesOpticalPower
	opsProtectionSwitchThreshold	CoriantTypesOpticalPower
	opsWorkingLosThreshold	CoriantTypesOpticalPower
	opsProtectionLosThreshold	CoriantTypesOpticalPower
	opsHoldoffTimer	Unsigned32
	opsWavelengthBand	INTEGER

SubportStatisticsEntry
SEQUENCE
	subportStatisticsEntryLastClear	IetfYangTypesDateAndTime

PortStatisticsEntry
SEQUENCE
	portStatisticsEntryLastClear	IetfYangTypesDateAndTime

SubcardStatisticsEntry
SEQUENCE
	subcardStatisticsEntryLastClear	IetfYangTypesDateAndTime

CardStatisticsEntry
SEQUENCE
	cardStatisticsEntryLastClear	IetfYangTypesDateAndTime

ShelfStatisticsEntry
SEQUENCE
	shelfStatisticsEntryLastClear	IetfYangTypesDateAndTime

Eth10gEntry
SEQUENCE
	eth10gEthFecType	CoriantTypesEthFec
	eth10gEthFecTypeState	CoriantTypesEthFec
	eth10gTransmitInterpacketgap	Unsigned32
	eth10gGfpPayloadFcs	CoriantTypesEnableSwitch
	eth10gMappingMode	INTEGER
	eth10gAdminStatus	INTEGER
	eth10gOperStatus	INTEGER
	eth10gAvailStatus	BITS
	eth10gAliasName	OCTET STRING
	eth10gClientShutdown	CoriantTypesYesNo
	eth10gClientShutdownHoldoffTimer	Unsigned32
	eth10gNearEndAls	CoriantTypesYesNo
	eth10gAlsDegradeMode	CoriantTypesEnableSwitch
	eth10gLoopbackEnable	CoriantTypesEnableSwitch
	eth10gLoopbackType	INTEGER
	eth10gTestSignalType	CoriantTypesTestSignalType
	eth10gTestSignalEnable	CoriantTypesTestSignalConfig
	eth10gServiceLabel	OCTET STRING
	eth10gLldpStatusIf	INTEGER
	eth10gUpiValue	INTEGER
	eth10gHoldoffSignal	CoriantTypesYesNo

TestSignalFacilityStatusEntry
SEQUENCE
	testSignalFacilityStatusPrbsSync	INTEGER
	testSignalFacilityStatusTestTimeDuration	Unsigned32
	testSignalFacilityStatusPrbsBitErrorCount	IetfYangTypesGauge64

LldpRemoteSystemEntry
SEQUENCE
	lldpRemoteSystemLldpRemoteIndex	Unsigned32
	lldpRemoteSystemRemoteChassisIdSubtype	INTEGER
	lldpRemoteSystemRemoteChassisId	OCTET STRING
	lldpRemoteSystemRemotePortIdSubtype	INTEGER
	lldpRemoteSystemRemotePortId	OCTET STRING
	lldpRemoteSystemRemotePortDesc	OCTET STRING
	lldpRemoteSystemRemoteSysName	OCTET STRING
	lldpRemoteSystemRemoteSysDesc	OCTET STRING
	lldpRemoteSystemRemoteSysCapSupported	LldpLldpSysCap
	lldpRemoteSystemRemoteSysCapEnabled	LldpLldpSysCap

RemoteManAddressesEntry
SEQUENCE
	remoteManAddressesRemoteManAddrSubtype	Unsigned32
	remoteManAddressesRemoteManAddr	OCTET STRING
	remoteManAddressesRemoteManAddrIfSubtype	Unsigned32
	remoteManAddressesRemoteManAddrIfId	Unsigned32
	remoteManAddressesRemoteManAddrOid	OCTET STRING

OduEntry
SEQUENCE
	odutypeL1	CoriantTypesOduType
	oduidL1	Unsigned32
	odutypeL2	CoriantTypesOduType
	oduidL2	Unsigned32
	odutypeL3	CoriantTypesOduType
	oduidL3	Unsigned32
	odutypeL4	CoriantTypesOduType
	oduidL4	Unsigned32
	oduAdminStatus	INTEGER
	oduOperStatus	INTEGER
	oduAvailStatus	BITS
	oduAliasName	OCTET STRING
	oduServiceLabel	OCTET STRING
	oduTribSlot	CoriantTypesNumberList
	oduRxPayloadType	OCTET STRING
	oduTxPayloadType	OCTET STRING
	oduNimEnable	CoriantTypesEnableSwitch
	oduDelayMeasurementEnable	CoriantTypesEnableSwitch
	oduOpuConfigActual	INTEGER
	oduClientSignalType	INTEGER
	oduExpSapi	OCTET STRING
	oduExpDapi	OCTET STRING
	oduExpOperator	OCTET STRING
	oduTxSapi	OCTET STRING
	oduTxDapi	OCTET STRING
	oduTxOperator	OCTET STRING
	oduTimDefectMode	CoriantTypesTimMode
	oduTimAct	CoriantTypesEnableSwitch
	oduRxSapi	OCTET STRING
	oduRxDapi	OCTET STRING
	oduRxOperator	OCTET STRING
	oduDegradeInterval	Unsigned32
	oduDegradeThreshold	Unsigned32
	oduTestSignalType	CoriantTypesTestSignalType
	oduTestSignalEnable	CoriantTypesTestSignalConfig
	oduTerminationMode	INTEGER

OduEncryptionEntry
SEQUENCE
	oduEncryptionEncryptionEnable	INTEGER
	oduEncryptionBlockCipherMode	INTEGER
	oduEncryptionEncryptionInterval	Unsigned32
	oduEncryptionEncryptionTxStatus	CoriantCommonOtnEncryStatusEnum
	oduEncryptionEncryptionRxStatus	CoriantCommonOtnEncryStatusEnum
	oduEncryptionOduKeySyncSession	CoriantCommonOtnKeySyncSession
	oduEncryptionEncryptionTxChannelId	OCTET STRING
	oduEncryptionTimeToNextKey	Unsigned32

TestSignalStatusEntry
SEQUENCE
	testSignalStatusPrbsSync	INTEGER
	testSignalStatusTestTimeDuration	Unsigned32
	testSignalStatusPrbsBitErrorCount	IetfYangTypesGauge64

Eth40gEntry
SEQUENCE
	eth40gEthFecType	CoriantTypesEthFec
	eth40gEthFecTypeState	CoriantTypesEthFec
	eth40gTransmitInterpacketgap	Unsigned32
	eth40gGfpPayloadFcs	CoriantTypesEnableSwitch
	eth40gMappingMode	INTEGER
	eth40gAdminStatus	INTEGER
	eth40gOperStatus	INTEGER
	eth40gAvailStatus	BITS
	eth40gAliasName	OCTET STRING
	eth40gClientShutdown	CoriantTypesYesNo
	eth40gClientShutdownHoldoffTimer	Unsigned32
	eth40gNearEndAls	CoriantTypesYesNo
	eth40gAlsDegradeMode	CoriantTypesEnableSwitch
	eth40gLoopbackEnable	CoriantTypesEnableSwitch
	eth40gLoopbackType	INTEGER
	eth40gTestSignalType	CoriantTypesTestSignalType
	eth40gTestSignalEnable	CoriantTypesTestSignalConfig
	eth40gServiceLabel	OCTET STRING
	eth40gLldpStatusIf	INTEGER
	eth40gHoldoffSignal	CoriantTypesYesNo

Eth100gEntry
SEQUENCE
	eth100gEthFecType	CoriantTypesEthFec
	eth100gEthFecTypeState	CoriantTypesEthFec
	eth100gTransmitInterpacketgap	Unsigned32
	eth100gGfpPayloadFcs	CoriantTypesEnableSwitch
	eth100gMappingMode	INTEGER
	eth100gAdminStatus	INTEGER
	eth100gOperStatus	INTEGER
	eth100gAvailStatus	BITS
	eth100gAliasName	OCTET STRING
	eth100gClientShutdown	CoriantTypesYesNo
	eth100gClientShutdownHoldoffTimer	Unsigned32
	eth100gNearEndAls	CoriantTypesYesNo
	eth100gAlsDegradeMode	CoriantTypesEnableSwitch
	eth100gLoopbackEnable	CoriantTypesEnableSwitch
	eth100gLoopbackType	INTEGER
	eth100gTestSignalType	CoriantTypesTestSignalType
	eth100gTestSignalEnable	CoriantTypesTestSignalConfig
	eth100gServiceLabel	OCTET STRING
	eth100gLldpStatusIf	INTEGER
	eth100gHoldoffSignal	CoriantTypesYesNo

Otu4Entry
SEQUENCE
	otu4FecType	CoriantTypesOtukFec
	otu4AdminStatus	INTEGER
	otu4OperStatus	INTEGER
	otu4AvailStatus	BITS
	otu4AliasName	OCTET STRING
	otu4ServiceLabel	OCTET STRING
	otu4ExpSapi	OCTET STRING
	otu4ExpDapi	OCTET STRING
	otu4ExpOperator	OCTET STRING
	otu4TxSapi	OCTET STRING
	otu4TxDapi	OCTET STRING
	otu4TxOperator	OCTET STRING
	otu4TimDefectMode	CoriantTypesTimMode
	otu4TimAct	CoriantTypesEnableSwitch
	otu4RxSapi	OCTET STRING
	otu4RxDapi	OCTET STRING
	otu4RxOperator	OCTET STRING
	otu4DegradeInterval	Unsigned32
	otu4DegradeThreshold	Unsigned32
	otu4LoopbackEnable	CoriantTypesEnableSwitch
	otu4LoopbackType	INTEGER
	otu4ClientShutdown	CoriantTypesYesNo
	otu4ClientShutdownHoldoffTimer	Unsigned32
	otu4HoldoffSignal	CoriantTypesYesNo
	otu4NearEndAls	CoriantTypesYesNo
	otu4AlsDegradeMode	CoriantTypesEnableSwitch

Otu2Entry
SEQUENCE
	otu2FecType	CoriantTypesOtukFec
	otu2AdminStatus	INTEGER
	otu2OperStatus	INTEGER
	otu2AvailStatus	BITS
	otu2AliasName	OCTET STRING
	otu2ServiceLabel	OCTET STRING
	otu2ExpSapi	OCTET STRING
	otu2ExpDapi	OCTET STRING
	otu2ExpOperator	OCTET STRING
	otu2TxSapi	OCTET STRING
	otu2TxDapi	OCTET STRING
	otu2TxOperator	OCTET STRING
	otu2TimDefectMode	CoriantTypesTimMode
	otu2TimAct	CoriantTypesEnableSwitch
	otu2RxSapi	OCTET STRING
	otu2RxDapi	OCTET STRING
	otu2RxOperator	OCTET STRING
	otu2DegradeInterval	Unsigned32
	otu2DegradeThreshold	Unsigned32
	otu2LoopbackEnable	CoriantTypesEnableSwitch
	otu2LoopbackType	INTEGER

Otu2eEntry
SEQUENCE
	otu2eFecType	CoriantTypesOtukFec
	otu2eAdminStatus	INTEGER
	otu2eOperStatus	INTEGER
	otu2eAvailStatus	BITS
	otu2eAliasName	OCTET STRING
	otu2eServiceLabel	OCTET STRING
	otu2eExpSapi	OCTET STRING
	otu2eExpDapi	OCTET STRING
	otu2eExpOperator	OCTET STRING
	otu2eTxSapi	OCTET STRING
	otu2eTxDapi	OCTET STRING
	otu2eTxOperator	OCTET STRING
	otu2eTimDefectMode	CoriantTypesTimMode
	otu2eTimAct	CoriantTypesEnableSwitch
	otu2eRxSapi	OCTET STRING
	otu2eRxDapi	OCTET STRING
	otu2eRxOperator	OCTET STRING
	otu2eDegradeInterval	Unsigned32
	otu2eDegradeThreshold	Unsigned32
	otu2eLoopbackEnable	CoriantTypesEnableSwitch
	otu2eLoopbackType	INTEGER

Fc8gEntry
SEQUENCE
	fc8gMappingMode	INTEGER
	fc8gAdminStatus	INTEGER
	fc8gOperStatus	INTEGER
	fc8gAvailStatus	BITS
	fc8gAliasName	OCTET STRING
	fc8gClientShutdown	CoriantTypesYesNo
	fc8gClientShutdownHoldoffTimer	Unsigned32
	fc8gNearEndAls	CoriantTypesYesNo
	fc8gAlsDegradeMode	CoriantTypesEnableSwitch
	fc8gLoopbackEnable	CoriantTypesEnableSwitch
	fc8gLoopbackType	INTEGER
	fc8gTestSignalType	CoriantTypesTestSignalType
	fc8gTestSignalEnable	CoriantTypesTestSignalConfig
	fc8gServiceLabel	OCTET STRING
	fc8gHoldoffSignal	CoriantTypesYesNo

Fc16gEntry
SEQUENCE
	fc16gMappingMode	INTEGER
	fc16gAdminStatus	INTEGER
	fc16gOperStatus	INTEGER
	fc16gAvailStatus	BITS
	fc16gAliasName	OCTET STRING
	fc16gClientShutdown	CoriantTypesYesNo
	fc16gClientShutdownHoldoffTimer	Unsigned32
	fc16gNearEndAls	CoriantTypesYesNo
	fc16gAlsDegradeMode	CoriantTypesEnableSwitch
	fc16gLoopbackEnable	CoriantTypesEnableSwitch
	fc16gLoopbackType	INTEGER
	fc16gTestSignalType	CoriantTypesTestSignalType
	fc16gTestSignalEnable	CoriantTypesTestSignalConfig
	fc16gServiceLabel	OCTET STRING
	fc16gHoldoffSignal	CoriantTypesYesNo

Oc192Entry
SEQUENCE
	oc192MappingMode	INTEGER
	oc192AdminStatus	INTEGER
	oc192OperStatus	INTEGER
	oc192AvailStatus	BITS
	oc192AliasName	OCTET STRING
	oc192ClientShutdown	CoriantTypesYesNo
	oc192ClientShutdownHoldoffTimer	Unsigned32
	oc192NearEndAls	CoriantTypesYesNo
	oc192AlsDegradeMode	CoriantTypesEnableSwitch
	oc192LoopbackEnable	CoriantTypesEnableSwitch
	oc192LoopbackType	INTEGER
	oc192TestSignalType	CoriantTypesTestSignalType
	oc192TestSignalEnable	CoriantTypesTestSignalConfig
	oc192ServiceLabel	OCTET STRING
	oc192ExpTrc	OCTET STRING
	oc192TxTrc	OCTET STRING
	oc192RxTrc	OCTET STRING
	oc192TimAct	CoriantTypesEnableSwitch
	oc192TimMonitor	CoriantTypesEnableSwitch
	oc192AisType	INTEGER
	oc192HoldoffSignal	CoriantTypesYesNo

Stm64Entry
SEQUENCE
	stm64MappingMode	INTEGER
	stm64AdminStatus	INTEGER
	stm64OperStatus	INTEGER
	stm64AvailStatus	BITS
	stm64AliasName	OCTET STRING
	stm64ClientShutdown	CoriantTypesYesNo
	stm64ClientShutdownHoldoffTimer	Unsigned32
	stm64NearEndAls	CoriantTypesYesNo
	stm64AlsDegradeMode	CoriantTypesEnableSwitch
	stm64LoopbackEnable	CoriantTypesEnableSwitch
	stm64LoopbackType	INTEGER
	stm64TestSignalType	CoriantTypesTestSignalType
	stm64TestSignalEnable	CoriantTypesTestSignalConfig
	stm64ServiceLabel	OCTET STRING
	stm64ExpTrc	OCTET STRING
	stm64TxTrc	OCTET STRING
	stm64RxTrc	OCTET STRING
	stm64TimAct	CoriantTypesEnableSwitch
	stm64TimMonitor	CoriantTypesEnableSwitch
	stm64AisType	INTEGER
	stm64HoldoffSignal	CoriantTypesYesNo

Otuc2Entry
SEQUENCE
	otuc2FecType	CoriantTypesOtukFec
	otuc2AdminStatus	INTEGER
	otuc2OperStatus	INTEGER
	otuc2AvailStatus	BITS
	otuc2AliasName	OCTET STRING
	otuc2ServiceLabel	OCTET STRING
	otuc2ExpSapi	OCTET STRING
	otuc2ExpDapi	OCTET STRING
	otuc2ExpOperator	OCTET STRING
	otuc2TxSapi	OCTET STRING
	otuc2TxDapi	OCTET STRING
	otuc2TxOperator	OCTET STRING
	otuc2TimDefectMode	CoriantTypesTimMode
	otuc2TimAct	CoriantTypesEnableSwitch
	otuc2RxSapi	OCTET STRING
	otuc2RxDapi	OCTET STRING
	otuc2RxOperator	OCTET STRING
	otuc2DegradeInterval	Unsigned32
	otuc2DegradeThreshold	Unsigned32

Otuc3Entry
SEQUENCE
	otuc3FecType	CoriantTypesOtukFec
	otuc3AdminStatus	INTEGER
	otuc3OperStatus	INTEGER
	otuc3AvailStatus	BITS
	otuc3AliasName	OCTET STRING
	otuc3ServiceLabel	OCTET STRING
	otuc3ExpSapi	OCTET STRING
	otuc3ExpDapi	OCTET STRING
	otuc3ExpOperator	OCTET STRING
	otuc3TxSapi	OCTET STRING
	otuc3TxDapi	OCTET STRING
	otuc3TxOperator	OCTET STRING
	otuc3TimDefectMode	CoriantTypesTimMode
	otuc3TimAct	CoriantTypesEnableSwitch
	otuc3RxSapi	OCTET STRING
	otuc3RxDapi	OCTET STRING
	otuc3RxOperator	OCTET STRING
	otuc3DegradeInterval	Unsigned32
	otuc3DegradeThreshold	Unsigned32

OchOsEntry
SEQUENCE
	ochOsModulationFormat	INTEGER
	ochOsLineEncoding	INTEGER
	ochOsFrequency	CoriantTypesFreq
	ochOsActualFrequency	CoriantTypesFreq
	ochOsRxFrequency	CoriantTypesFreq
	ochOsActualRxFrequency	CoriantTypesFreq
	ochOsLaserEnable	CoriantTypesEnableSwitch
	ochOsRequiredTxOpticalPower	CoriantTypesOpticalPower
	ochOsActualTxOpticalPower	CoriantTypesOpticalPower
	ochOsFecType	CoriantTypesOtukFec
	ochOsRxAttenuation	CoriantTypesOpticalDB
	ochOsTxFilterRollOff	OCTET STRING
	ochOsPreemphasis	CoriantTypesEnableSwitch
	ochOsPreemphasisValue	OCTET STRING
	ochOsAdminStatus	INTEGER
	ochOsOperStatus	INTEGER
	ochOsAvailStatus	BITS
	ochOsAliasName	OCTET STRING
	ochOsLoopbackEnable	CoriantTypesEnableSwitch
	ochOsLoopbackType	INTEGER
	ochOsServiceLabel	OCTET STRING
	ochOsDGD	Unsigned32
	ochOsCD	INTEGER
	ochOsOSNR	CoriantTypesOpticalDB
	ochOsQFactor	CoriantTypesOpticalDB
	ochOsPreFecBer	OCTET STRING
	ochOsCdRangeLow	INTEGER
	ochOsCdRangeHigh	INTEGER
	ochOsPropagateShutdown	CoriantTypesYesNo
	ochOsFastSopMode	CoriantTypesEnableSwitch

Wan10gSonetEntry
SEQUENCE
	wan10gSonetMappingMode	INTEGER
	wan10gSonetAdminStatus	INTEGER
	wan10gSonetOperStatus	INTEGER
	wan10gSonetAvailStatus	BITS
	wan10gSonetAliasName	OCTET STRING
	wan10gSonetClientShutdown	CoriantTypesYesNo
	wan10gSonetClientShutdownHoldoffTimer	Unsigned32
	wan10gSonetHoldoffSignal	CoriantTypesYesNo
	wan10gSonetNearEndAls	CoriantTypesYesNo
	wan10gSonetAlsDegradeMode	CoriantTypesEnableSwitch
	wan10gSonetLoopbackEnable	CoriantTypesEnableSwitch
	wan10gSonetLoopbackType	INTEGER
	wan10gSonetTestSignalType	CoriantTypesTestSignalType
	wan10gSonetTestSignalEnable	CoriantTypesTestSignalConfig
	wan10gSonetServiceLabel	OCTET STRING
	wan10gSonetExpTrc	OCTET STRING
	wan10gSonetTxTrc	OCTET STRING
	wan10gSonetRxTrc	OCTET STRING
	wan10gSonetTimAct	CoriantTypesEnableSwitch
	wan10gSonetTimMonitor	CoriantTypesEnableSwitch
	wan10gSonetAisType	INTEGER

Wan10gSdhEntry
SEQUENCE
	wan10gSdhMappingMode	INTEGER
	wan10gSdhAdminStatus	INTEGER
	wan10gSdhOperStatus	INTEGER
	wan10gSdhAvailStatus	BITS
	wan10gSdhAliasName	OCTET STRING
	wan10gSdhClientShutdown	CoriantTypesYesNo
	wan10gSdhClientShutdownHoldoffTimer	Unsigned32
	wan10gSdhHoldoffSignal	CoriantTypesYesNo
	wan10gSdhNearEndAls	CoriantTypesYesNo
	wan10gSdhAlsDegradeMode	CoriantTypesEnableSwitch
	wan10gSdhLoopbackEnable	CoriantTypesEnableSwitch
	wan10gSdhLoopbackType	INTEGER
	wan10gSdhTestSignalType	CoriantTypesTestSignalType
	wan10gSdhTestSignalEnable	CoriantTypesTestSignalConfig
	wan10gSdhServiceLabel	OCTET STRING
	wan10gSdhExpTrc	OCTET STRING
	wan10gSdhTxTrc	OCTET STRING
	wan10gSdhRxTrc	OCTET STRING
	wan10gSdhTimAct	CoriantTypesEnableSwitch
	wan10gSdhTimMonitor	CoriantTypesEnableSwitch
	wan10gSdhAisType	INTEGER

Eth10gStatisticsEntry
SEQUENCE
	eth10gStatisticsEntryLastClear	IetfYangTypesDateAndTime
	eth10gStatisticsEntryLossOfSignalSeconds	OCTET STRING
	eth10gStatisticsEntryBitErrorFec	OCTET STRING
	eth10gStatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	eth10gStatisticsEntryInSymbolErrors	OCTET STRING
	eth10gStatisticsEntryInDropEvents	OCTET STRING
	eth10gStatisticsEntryInOctets	OCTET STRING
	eth10gStatisticsEntryInPackets	OCTET STRING
	eth10gStatisticsEntryInBroadcastPackets	OCTET STRING
	eth10gStatisticsEntryInMulticastPackets	OCTET STRING
	eth10gStatisticsEntryInCrcAlignErrors	OCTET STRING
	eth10gStatisticsEntryInUndersizePackets	OCTET STRING
	eth10gStatisticsEntryInOversizePackets	OCTET STRING
	eth10gStatisticsEntryInFragments	OCTET STRING
	eth10gStatisticsEntryInJabbers	OCTET STRING
	eth10gStatisticsEntryInPackets64octets	OCTET STRING
	eth10gStatisticsEntryInPackets65to127octets	OCTET STRING
	eth10gStatisticsEntryInPackets128to255octets	OCTET STRING
	eth10gStatisticsEntryInPackets256to511octets	OCTET STRING
	eth10gStatisticsEntryInPackets512to1023octets	OCTET STRING
	eth10gStatisticsEntryInPackets1024to1518octets	OCTET STRING
	eth10gStatisticsEntryOutSymbolErrors	OCTET STRING
	eth10gStatisticsEntryOutDropEvents	OCTET STRING
	eth10gStatisticsEntryOutOctets	OCTET STRING
	eth10gStatisticsEntryOutPackets	OCTET STRING
	eth10gStatisticsEntryOutBroadcastPackets	OCTET STRING
	eth10gStatisticsEntryOutMulticastPackets	OCTET STRING
	eth10gStatisticsEntryOutCrcAlignErrors	OCTET STRING
	eth10gStatisticsEntryOutUndersizePackets	OCTET STRING
	eth10gStatisticsEntryOutOversizePackets	OCTET STRING
	eth10gStatisticsEntryOutFragments	OCTET STRING
	eth10gStatisticsEntryOutJabbers	OCTET STRING
	eth10gStatisticsEntryOutPackets64octets	OCTET STRING
	eth10gStatisticsEntryOutPackets65to127octets	OCTET STRING
	eth10gStatisticsEntryOutPackets128to255octets	OCTET STRING
	eth10gStatisticsEntryOutPackets256to511octets	OCTET STRING
	eth10gStatisticsEntryOutPackets512to1023octets	OCTET STRING
	eth10gStatisticsEntryOutPackets1024to1518octets	OCTET STRING

OduStatisticsEntry
SEQUENCE
	oduStatisticsEntryLastClear	IetfYangTypesDateAndTime
	oduStatisticsEntryErroredBlocks	OCTET STRING
	oduStatisticsEntryErroredSeconds	OCTET STRING
	oduStatisticsEntrySeverelyErroredSeconds	OCTET STRING
	oduStatisticsEntryUnavailableSeconds	OCTET STRING
	oduStatisticsEntryEncryptionFailRx	OCTET STRING

Eth40gStatisticsEntry
SEQUENCE
	eth40gStatisticsEntryLastClear	IetfYangTypesDateAndTime
	eth40gStatisticsEntryLossOfSignalSeconds	OCTET STRING
	eth40gStatisticsEntryBitErrorFec	OCTET STRING
	eth40gStatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	eth40gStatisticsEntryInSymbolErrors	OCTET STRING
	eth40gStatisticsEntryInDropEvents	OCTET STRING
	eth40gStatisticsEntryInOctets	OCTET STRING
	eth40gStatisticsEntryInPackets	OCTET STRING
	eth40gStatisticsEntryInBroadcastPackets	OCTET STRING
	eth40gStatisticsEntryInMulticastPackets	OCTET STRING
	eth40gStatisticsEntryInCrcAlignErrors	OCTET STRING
	eth40gStatisticsEntryInUndersizePackets	OCTET STRING
	eth40gStatisticsEntryInOversizePackets	OCTET STRING
	eth40gStatisticsEntryInFragments	OCTET STRING
	eth40gStatisticsEntryInJabbers	OCTET STRING
	eth40gStatisticsEntryInPackets64octets	OCTET STRING
	eth40gStatisticsEntryInPackets65to127octets	OCTET STRING
	eth40gStatisticsEntryInPackets128to255octets	OCTET STRING
	eth40gStatisticsEntryInPackets256to511octets	OCTET STRING
	eth40gStatisticsEntryInPackets512to1023octets	OCTET STRING
	eth40gStatisticsEntryInPackets1024to1518octets	OCTET STRING
	eth40gStatisticsEntryOutSymbolErrors	OCTET STRING
	eth40gStatisticsEntryOutDropEvents	OCTET STRING
	eth40gStatisticsEntryOutOctets	OCTET STRING
	eth40gStatisticsEntryOutPackets	OCTET STRING
	eth40gStatisticsEntryOutBroadcastPackets	OCTET STRING
	eth40gStatisticsEntryOutMulticastPackets	OCTET STRING
	eth40gStatisticsEntryOutCrcAlignErrors	OCTET STRING
	eth40gStatisticsEntryOutUndersizePackets	OCTET STRING
	eth40gStatisticsEntryOutOversizePackets	OCTET STRING
	eth40gStatisticsEntryOutFragments	OCTET STRING
	eth40gStatisticsEntryOutJabbers	OCTET STRING
	eth40gStatisticsEntryOutPackets64octets	OCTET STRING
	eth40gStatisticsEntryOutPackets65to127octets	OCTET STRING
	eth40gStatisticsEntryOutPackets128to255octets	OCTET STRING
	eth40gStatisticsEntryOutPackets256to511octets	OCTET STRING
	eth40gStatisticsEntryOutPackets512to1023octets	OCTET STRING
	eth40gStatisticsEntryOutPackets1024to1518octets	OCTET STRING

Eth100gStatisticsEntry
SEQUENCE
	eth100gStatisticsEntryLastClear	IetfYangTypesDateAndTime
	eth100gStatisticsEntryLossOfSignalSeconds	OCTET STRING
	eth100gStatisticsEntryBitErrorFec	OCTET STRING
	eth100gStatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	eth100gStatisticsEntryInSymbolErrors	OCTET STRING
	eth100gStatisticsEntryInDropEvents	OCTET STRING
	eth100gStatisticsEntryInOctets	OCTET STRING
	eth100gStatisticsEntryInPackets	OCTET STRING
	eth100gStatisticsEntryInBroadcastPackets	OCTET STRING
	eth100gStatisticsEntryInMulticastPackets	OCTET STRING
	eth100gStatisticsEntryInCrcAlignErrors	OCTET STRING
	eth100gStatisticsEntryInUndersizePackets	OCTET STRING
	eth100gStatisticsEntryInOversizePackets	OCTET STRING
	eth100gStatisticsEntryInFragments	OCTET STRING
	eth100gStatisticsEntryInJabbers	OCTET STRING
	eth100gStatisticsEntryInPackets64octets	OCTET STRING
	eth100gStatisticsEntryInPackets65to127octets	OCTET STRING
	eth100gStatisticsEntryInPackets128to255octets	OCTET STRING
	eth100gStatisticsEntryInPackets256to511octets	OCTET STRING
	eth100gStatisticsEntryInPackets512to1023octets	OCTET STRING
	eth100gStatisticsEntryInPackets1024to1518octets	OCTET STRING
	eth100gStatisticsEntryOutSymbolErrors	OCTET STRING
	eth100gStatisticsEntryOutDropEvents	OCTET STRING
	eth100gStatisticsEntryOutOctets	OCTET STRING
	eth100gStatisticsEntryOutPackets	OCTET STRING
	eth100gStatisticsEntryOutBroadcastPackets	OCTET STRING
	eth100gStatisticsEntryOutMulticastPackets	OCTET STRING
	eth100gStatisticsEntryOutCrcAlignErrors	OCTET STRING
	eth100gStatisticsEntryOutUndersizePackets	OCTET STRING
	eth100gStatisticsEntryOutOversizePackets	OCTET STRING
	eth100gStatisticsEntryOutFragments	OCTET STRING
	eth100gStatisticsEntryOutJabbers	OCTET STRING
	eth100gStatisticsEntryOutPackets64octets	OCTET STRING
	eth100gStatisticsEntryOutPackets65to127octets	OCTET STRING
	eth100gStatisticsEntryOutPackets128to255octets	OCTET STRING
	eth100gStatisticsEntryOutPackets256to511octets	OCTET STRING
	eth100gStatisticsEntryOutPackets512to1023octets	OCTET STRING
	eth100gStatisticsEntryOutPackets1024to1518octets	OCTET STRING

Otu4StatisticsEntry
SEQUENCE
	otu4StatisticsEntryLastClear	IetfYangTypesDateAndTime
	otu4StatisticsEntryLossOfSignalSeconds	OCTET STRING
	otu4StatisticsEntryBitErrorFec	OCTET STRING
	otu4StatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	otu4StatisticsEntryErroredBlocks	OCTET STRING
	otu4StatisticsEntryErroredSeconds	OCTET STRING
	otu4StatisticsEntrySeverelyErroredSeconds	OCTET STRING
	otu4StatisticsEntryUnavailableSeconds	OCTET STRING

Otu2StatisticsEntry
SEQUENCE
	otu2StatisticsEntryLastClear	IetfYangTypesDateAndTime
	otu2StatisticsEntryLossOfSignalSeconds	OCTET STRING
	otu2StatisticsEntryBitErrorFec	OCTET STRING
	otu2StatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	otu2StatisticsEntryErroredBlocks	OCTET STRING
	otu2StatisticsEntryErroredSeconds	OCTET STRING
	otu2StatisticsEntrySeverelyErroredSeconds	OCTET STRING
	otu2StatisticsEntryUnavailableSeconds	OCTET STRING

Otu2eStatisticsEntry
SEQUENCE
	otu2eStatisticsEntryLastClear	IetfYangTypesDateAndTime
	otu2eStatisticsEntryLossOfSignalSeconds	OCTET STRING
	otu2eStatisticsEntryBitErrorFec	OCTET STRING
	otu2eStatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	otu2eStatisticsEntryErroredBlocks	OCTET STRING
	otu2eStatisticsEntryErroredSeconds	OCTET STRING
	otu2eStatisticsEntrySeverelyErroredSeconds	OCTET STRING
	otu2eStatisticsEntryUnavailableSeconds	OCTET STRING

Oc192StatisticsEntry
SEQUENCE
	oc192StatisticsEntryLastClear	IetfYangTypesDateAndTime
	oc192StatisticsEntryLossOfSignalSeconds	OCTET STRING
	oc192StatisticsEntryInCodingViolation	OCTET STRING
	oc192StatisticsEntryInErroredSeconds	OCTET STRING
	oc192StatisticsEntryInSeverelyErroredSeconds	OCTET STRING
	oc192StatisticsEntryInUnavailableSeconds	OCTET STRING
	oc192StatisticsEntryInSeverelyErroredFrameSecond	OCTET STRING

Stm64StatisticsEntry
SEQUENCE
	stm64StatisticsEntryLastClear	IetfYangTypesDateAndTime
	stm64StatisticsEntryLossOfSignalSeconds	OCTET STRING
	stm64StatisticsEntryInBackgroundBlockError	OCTET STRING
	stm64StatisticsEntryInErroredSeconds	OCTET STRING
	stm64StatisticsEntryInSeverelyErroredSeconds	OCTET STRING
	stm64StatisticsEntryInUnavailableSeconds	OCTET STRING
	stm64StatisticsEntryInOutOfFrameSeconds	OCTET STRING

Wan10gSonetStatisticsEntry
SEQUENCE
	wan10gSonetStatisticsEntryLastClear	IetfYangTypesDateAndTime
	wan10gSonetStatisticsEntryLossOfSignalSeconds	OCTET STRING
	wan10gSonetStatisticsEntryInCodingViolation	OCTET STRING
	wan10gSonetStatisticsEntryInErroredSeconds	OCTET STRING
	wan10gSonetStatisticsEntryInSeverelyErroredSeconds	OCTET STRING
	wan10gSonetStatisticsEntryInUnavailableSeconds	OCTET STRING
	wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond	OCTET STRING

Wan10gSdhStatisticsEntry
SEQUENCE
	wan10gSdhStatisticsEntryLastClear	IetfYangTypesDateAndTime
	wan10gSdhStatisticsEntryLossOfSignalSeconds	OCTET STRING
	wan10gSdhStatisticsEntryInBackgroundBlockError	OCTET STRING
	wan10gSdhStatisticsEntryInErroredSeconds	OCTET STRING
	wan10gSdhStatisticsEntryInSeverelyErroredSeconds	OCTET STRING
	wan10gSdhStatisticsEntryInUnavailableSeconds	OCTET STRING
	wan10gSdhStatisticsEntryInOutOfFrameSeconds	OCTET STRING

Fc8gStatisticsEntry
SEQUENCE
	fc8gStatisticsEntryLastClear	IetfYangTypesDateAndTime
	fc8gStatisticsEntryLossOfSignalSeconds	OCTET STRING
	fc8gStatisticsEntryInSymbolErrors	OCTET STRING

Fc16gStatisticsEntry
SEQUENCE
	fc16gStatisticsEntryLastClear	IetfYangTypesDateAndTime
	fc16gStatisticsEntryLossOfSignalSeconds	OCTET STRING
	fc16gStatisticsEntryInSymbolErrors	OCTET STRING

Otuc2StatisticsEntry
SEQUENCE
	otuc2StatisticsEntryLastClear	IetfYangTypesDateAndTime
	otuc2StatisticsEntryLossOfSignalSeconds	OCTET STRING
	otuc2StatisticsEntryBitErrorFec	OCTET STRING
	otuc2StatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	otuc2StatisticsEntryErroredBlocks	OCTET STRING
	otuc2StatisticsEntryErroredSeconds	OCTET STRING
	otuc2StatisticsEntrySeverelyErroredSeconds	OCTET STRING
	otuc2StatisticsEntryUnavailableSeconds	OCTET STRING

Otuc3StatisticsEntry
SEQUENCE
	otuc3StatisticsEntryLastClear	IetfYangTypesDateAndTime
	otuc3StatisticsEntryLossOfSignalSeconds	OCTET STRING
	otuc3StatisticsEntryBitErrorFec	OCTET STRING
	otuc3StatisticsEntryUncorrectedBlockErrorFec	OCTET STRING
	otuc3StatisticsEntryErroredBlocks	OCTET STRING
	otuc3StatisticsEntryErroredSeconds	OCTET STRING
	otuc3StatisticsEntrySeverelyErroredSeconds	OCTET STRING
	otuc3StatisticsEntryUnavailableSeconds	OCTET STRING

OchOsStatisticsEntry
SEQUENCE
	ochOsStatisticsEntryLastClear	IetfYangTypesDateAndTime
	ochOsStatisticsEntryLossOfSignalSeconds	OCTET STRING
	ochOsStatisticsEntryBitErrorFec	OCTET STRING
	ochOsStatisticsEntryUncorrectedBlockErrorFec	OCTET STRING

CRSEntry
SEQUENCE
	cRSSrcTp	RowPointer
	cRSDstTp	RowPointer
	cRSServiceLabel	OCTET STRING
	cRSManagedBy	INTEGER
	cRSAliasName	OCTET STRING

FiberConnectionEntry
SEQUENCE
	fiberConnectionSrcPort	RowPointer
	fiberConnectionDstPort	RowPointer
	fiberConnectionType	INTEGER
	fiberConnectionFiberLabel	OCTET STRING
	fiberConnectionAliasName	OCTET STRING

OtsEntry
SEQUENCE
	otsName	CoriantTypesNameIdentifier
	otsAdminStatus	INTEGER
	otsOperStatus	INTEGER
	otsAvailStatus	BITS
	otsAliasName	OCTET STRING
	otsSupportingRxPort	OpticalCommonSupportingPort
	otsSupportingTxPort	OpticalCommonSupportingPort
	otsMeasuredSpanLoss	CoriantTypesOpticalDB

OmsEntry
SEQUENCE
	omsName	CoriantTypesNameIdentifier
	omsAdminStatus	INTEGER
	omsOperStatus	INTEGER
	omsAvailStatus	BITS
	omsAliasName	OCTET STRING
	omsSupportingRxPort	OpticalCommonSupportingPort
	omsSupportingTxPort	OpticalCommonSupportingPort
	omsParentOtsInterface	RowPointer
	omsRxOpticalPower	CoriantTypesOpticalPower
	omsTxOpticalPower	CoriantTypesOpticalPower

OscEntry
SEQUENCE
	oscName	CoriantTypesNameIdentifier
	oscAdminStatus	INTEGER
	oscOperStatus	INTEGER
	oscAvailStatus	BITS
	oscAliasName	OCTET STRING
	oscSupportingRxPort	OpticalCommonSupportingPort
	oscSupportingTxPort	OpticalCommonSupportingPort
	oscParentOtsInterface	RowPointer
	oscMode	INTEGER
	oscWavelength	OCTET STRING
	oscDataCommunication	CoriantTypesEnableSwitch
	oscRxOpticalPower	CoriantTypesOpticalPower
	oscTxOpticalPower	CoriantTypesOpticalPower

GoptEntry
SEQUENCE
	goptName	CoriantTypesNameIdentifier
	goptAdminStatus	INTEGER
	goptOperStatus	INTEGER
	goptAvailStatus	BITS
	goptAliasName	OCTET STRING
	goptSupportingRxPort	OpticalCommonSupportingPort
	goptSupportingTxPort	OpticalCommonSupportingPort
	goptRxOpticalPower	CoriantTypesOpticalPower
	goptTxOpticalPower	CoriantTypesOpticalPower

OmsStatisticsEntry
SEQUENCE
	omsStatisticsEntryLastClear	IetfYangTypesDateAndTime

OscStatisticsEntry
SEQUENCE
	oscStatisticsEntryLastClear	IetfYangTypesDateAndTime

GoptStatisticsEntry
SEQUENCE
	goptStatisticsEntryProtectionSwitchDuration	OCTET STRING
	goptStatisticsEntryProtectionSwitchCount	OCTET STRING
	goptStatisticsEntryLossTx	OCTET STRING
	goptStatisticsEntryLossRx	OCTET STRING
	goptStatisticsEntryLastClear	IetfYangTypesDateAndTime

PmPointEntry
SEQUENCE
	pmPointPmEntity	RowPointer
	pmPointPmpType	CoriantPmtypesPmpType
	pmPointPmTimePeriod	CoriantTypesManagementTimePeriod
	pmPointSupervisionSwitch	CoriantTypesEnableSwitch
	pmPointThresholdingSwitch	CoriantTypesEnableSwitch
	pmPointHistoryRecording	CoriantTypesEnableSwitch

PmDataCurrentEntry
SEQUENCE
	pmDataCurrentMonitoringDateTime	OCTET STRING
	pmDataCurrentPmParameter	CoriantPmtypesPmParameter
	pmDataCurrentPmValue	OCTET STRING
	pmDataCurrentPmUnit	CoriantCommonpmUnitOfValue
	pmDataCurrentValidity	CoriantPmtypesValidityType

PmDataLatestHistoryEntry
SEQUENCE
	pmDataLatestHistoryMonitoringDateTime	OCTET STRING
	pmDataLatestHistoryPmParameter	CoriantPmtypesPmParameter
	pmDataLatestHistoryPmValue	OCTET STRING
	pmDataLatestHistoryPmUnit	CoriantCommonpmUnitOfValue
	pmDataLatestHistoryValidity	CoriantPmtypesValidityType

PmDataHistoryEntry
SEQUENCE
	pmDataHistoryRecordIndex	Unsigned32
	pmDataHistoryMonitoringDateTime	OCTET STRING
	pmDataHistoryPmParameter	CoriantPmtypesPmParameter
	pmDataHistoryPmValue	OCTET STRING
	pmDataHistoryPmUnit	CoriantCommonpmUnitOfValue
	pmDataHistoryValidity	CoriantPmtypesValidityType

PmThresholdsValueEntry
SEQUENCE
	pmThresholdsValuePmParameter	CoriantPmtypesPmParameter
	pmThresholdsValuePmHighThreshold	CoriantCommonpmThresholdValue
	pmThresholdsValuePmLowThreshold	CoriantCommonpmThresholdValue
	pmThresholdsValuePmUnit	CoriantCommonpmUnitOfValue

InterfaceEntry
SEQUENCE
	interfaceIfName	OCTET STRING
	interfaceIfDescription	OCTET STRING
	interfaceIfType	INTEGER
	interfaceAdminStatus	INTEGER
	interfaceOperStatus	INTEGER
	interfaceAvailStatus	BITS
	interfaceAliasName	OCTET STRING

EthernetEntry
SEQUENCE
	ethernetAutoNegotiation	CoriantTypesEnableSwitch
	ethernetDuplexMode	CoriantTypesDuplexMode
	ethernetOperationalDuplexMode	CoriantTypesDuplexMode
	ethernetRate	CoriantTypesEthernetRate
	ethernetOperationalEthernetRate	CoriantTypesEthernetRate
	ethernetFlowControl	CoriantTypesFlowControl
	ethernetOperationalFlowControl	CoriantTypesFlowControl
	ethernetMacAddress	IetfYangTypesMacAddress
	ethernetAliasName	OCTET STRING

PppEntry
SEQUENCE
	pppType	INTEGER
	pppPfRef	RowPointer
	pppResourceRef	RowPointer
	pppAliasName	OCTET STRING

Ipv4Entry
SEQUENCE
	ipv4Forwarding	TruthValue
	ipv4Mtu	Unsigned32
	ipv4AddressAssignmentMethod	INTEGER

IpAddressEntry
SEQUENCE
	ipAddressIp	IetfInetTypesIpv4Address
	ipAddressOrigin	INTEGER
	ipAddressPrefixLength	Unsigned32

IpUnnumberedEntry
SEQUENCE
	ipUnnumberedUnnumEnabled	TruthValue
	ipUnnumberedParentInterface	RowPointer

RoutingProtocolEntry
SEQUENCE
	routingProtocolRtpType	CoriantTypesRtpType
	routingProtocolRtpName	OCTET STRING
	routingProtocolDescription	OCTET STRING

StaticRouteEntry
SEQUENCE
	staticRouteDestinationPrefix	IetfInetTypesIpv4Prefix
	staticRouteDescription	OCTET STRING
	staticRouteAdvertised	TruthValue

NextHopEntry
SEQUENCE
	nextHopIndex	OCTET STRING
	nextHopOutgoingInterface	RowPointer
	nextHopAddress	IetfInetTypesIpv4Address
	nextHopMetric	Unsigned32

OspfEntry
SEQUENCE
	ospfRouterId	IetfYangTypesDottedQuad
	ospfDescription	OCTET STRING
	ospfAsbr	TruthValue
	ospfAdminStatus	INTEGER
	ospfOperStatus	INTEGER
	ospfAliasName	OCTET STRING

OspfAreaEntry
SEQUENCE
	ospfAreaId	IetfYangTypesDottedQuad
	ospfAreaAdminStatus	INTEGER
	ospfAreaOperStatus	INTEGER
	ospfAreaAliasName	OCTET STRING
	ospfAreaType	INTEGER

OspfInterfaceEntry
SEQUENCE
	ospfInterfaceOspfIfName	OCTET STRING
	ospfInterfaceOspfLinkpf	OCTET STRING
	ospfInterfaceOspfCost	Unsigned32
	ospfInterfaceOspfIfRouting	INTEGER
	ospfInterfaceOspfNetworkType	INTEGER

OspfAdjacencyEntry
SEQUENCE
	ospfAdjacencyOspfNeighborAddress	IetfInetTypesIpv4Address
	ospfAdjacencyNeighborRouterId	IetfYangTypesDottedQuad
	ospfAdjacencyOspfAdjStatus	INTEGER

RibEntry
SEQUENCE
	ribName	OCTET STRING
	ribAddressFamily	INTEGER
	ribDefaultRib	TruthValue
	ribDescription	OCTET STRING

RouteEntry
SEQUENCE
	routeSourceProtocol	CoriantTypesSourceProtocol
	routeDestinationPrefix	IetfInetTypesIpv4Prefix
	routeDescription	OCTET STRING
	routePreference	Unsigned32
	routeActive	TruthValue

PppProfileEntry
SEQUENCE
	pppProfilePppPfName	OCTET STRING
	pppProfilePppFcsLength	INTEGER
	pppProfilePppMru	Unsigned32
	pppProfilePppRestartTimer	Unsigned32
	pppProfilePppMaxFailure	Unsigned32

OspfLinkProfileEntry
SEQUENCE
	ospfLinkProfileOspfLinkpfName	OCTET STRING
	ospfLinkProfileHelloInterval	Unsigned32
	ospfLinkProfileRouterDeadInterval	Unsigned32
	ospfLinkProfileRetransmissionInterval	Unsigned32

OscxEntry
SEQUENCE
	oscxChannel	INTEGER
	oscxResourceRef	RowPointer
	oscxAliasName	OCTET STRING

UserEntry
SEQUENCE
	userName	CoriantTypesUserName
	userPassword	OCTET STRING
	userClass	INTEGER
	userMaxInvalidLogin	Unsigned32
	userSuspensionTime	Unsigned32
	userTimeout	Unsigned32
	userPasswordAgingInterval	Unsigned32
	userPasswordExpirationDate	IetfYangTypesDateAndTime
	userAdminStatus	INTEGER
	userStatus	INTEGER
	userMaxSessions	Unsigned32
	userLastLoginDate	IetfYangTypesDateAndTime
	userAaaType	INTEGER

SessionEntry
SEQUENCE
	sessionId	CoriantTypesSessionId
	sessionUser	RowPointer
	sessionType	INTEGER
	sessionProtocol	INTEGER
	sessionCreatedTime	IetfYangTypesDateAndTime

AaaServerEntry
SEQUENCE
	aaaServerServerName	OCTET STRING
	aaaServerServerPriority	Unsigned32
	aaaServerProtocolSupported	INTEGER
	aaaServerServerIp	IetfInetTypesIpv4Address
	aaaServerServerPort	IetfInetTypesPortNumber
	aaaServerSharedSecret	OCTET STRING
	aaaServerRoleSupported	BITS
	aaaServerAdminStatus	INTEGER
	aaaServerTimeOut	Unsigned32
	aaaServerRetry	Unsigned32

KeySyncSessionEntry
SEQUENCE
	keySyncSessionId	Unsigned32
	keySyncSessionAdminStatus	INTEGER
	keySyncSessionSessionStatus	INTEGER
	keySyncSessionRemoteIp	IetfInetTypesIpv4Address
	keySyncSessionRemotePort	IetfInetTypesPortNumber
	keySyncSessionLocalIp	IetfInetTypesIpv4Address
	keySyncSessionLocalPort	IetfInetTypesPortNumber
	keySyncSessionSourceAddressFrom	OCTET STRING
	keySyncSessionConnectedTime	IetfYangTypesDateAndTime
	keySyncSessionType	INTEGER
	keySyncSessionAuthType	INTEGER
	keySyncSessionLocalCertificate	OCTET STRING

PskMapEntry
SEQUENCE
	pskMapPskIdentity	OCTET STRING
	pskMapKey	IetfYangTypesHexString
	pskMapPskStatus	INTEGER
	pskMapPskInfo	OCTET STRING
	pskMapWarningTimer	Unsigned32
	pskMapCriticalTimer	Unsigned32
	pskMapTrafficOffTimer	Unsigned32
	pskMapEffectiveTimestamp	IetfYangTypesDateAndTime

KeyEntry
SEQUENCE
	keyName	OCTET STRING
	keyAlgorithmIdentifier	INTEGER
	keyPublicKey	OCTET STRING

CertificateEntry
SEQUENCE
	certificateName	OCTET STRING
	certificateVersion	INTEGER
	certificateSerialNumber	OCTET STRING
	certificateSignatureAlgorithm	OCTET STRING
	certificateIssuer	OCTET STRING
	certificateValidFrom	OCTET STRING
	certificateValidTo	OCTET STRING
	certificateSubject	OCTET STRING
	certificatePublicKeyAlgorithm	OCTET STRING

TrustedCertificateGroupEntry
SEQUENCE
	trustedCertificateGroupName	OCTET STRING

TrustedCertificateEntry
SEQUENCE
	trustedCertificateName	OCTET STRING
	trustedCertificateVersion	INTEGER
	trustedCertificateSerialNumber	OCTET STRING
	trustedCertificateSignatureAlgorithm	OCTET STRING
	trustedCertificateIssuer	OCTET STRING
	trustedCertificateValidFrom	OCTET STRING
	trustedCertificateValidTo	OCTET STRING
	trustedCertificateSubject	OCTET STRING
	trustedCertificatePublicKeyAlgorithm	OCTET STRING

Snmpv3Entry
SEQUENCE
	snmpv3UserSecLevel	INTEGER
	snmpv3AuthProtocol	INTEGER
	snmpv3AuthPassphrase	OCTET STRING
	snmpv3PrivProtocol	INTEGER
	snmpv3PrivPassphrase	OCTET STRING

SnmpCommunityEntry
SEQUENCE
	snmpCommunityCommunityString	CoriantTypesSnmpString
	snmpCommunityCommunityStringAccess	INTEGER

SnmpTargetEntry
SEQUENCE
	snmpTargetSnmpVersion	INTEGER
	snmpTargetSnmpv3User	RowPointer
	snmpTargetTargetName	OCTET STRING
	snmpTargetTargetIp	IetfInetTypesIpv4Address
	snmpTargetTargetPort	IetfInetTypesPortNumber
	snmpTargetTargetTransport	INTEGER
	snmpTargetTrapCommunityString	CoriantTypesSnmpString

CliConfigEntry
SEQUENCE
	cliConfigCliLines	Unsigned32
	cliConfigCliColumns	Unsigned32
	cliConfigMaxHistorySize	Unsigned32
	cliConfigInteractiveMode	CoriantTypesEnableSwitch

CliAliasEntry
SEQUENCE
	cliAliasName	OCTET STRING
	cliAliasValue	OCTET STRING

CliScriptEntry
SEQUENCE
	cliScriptScriptName	OCTET STRING
	cliScriptDescription	OCTET STRING

SoftwareloadEntry
SEQUENCE
	softwareloadSwloadId	Unsigned32
	softwareloadSwloadState	INTEGER
	softwareloadSwloadVersion	CoriantFileSwTypesSwVersion
	softwareloadSwloadVendor	CoriantFileSwTypesSwloadVendor
	softwareloadSwloadProduct	CoriantFileSwTypesSwloadProduct
	softwareloadSwloadLabel	OCTET STRING

DatabaseEntry
SEQUENCE
	databaseId	Unsigned32
	databaseState	INTEGER
	databaseVersion	CoriantFileSwTypesSwVersion
	databaseVendor	CoriantFileSwTypesSwloadVendor
	databaseProduct	CoriantFileSwTypesSwloadProduct
	databaseBackupTime	OCTET STRING

FwVersionMapEntry
SEQUENCE
	fwVersionMapDeviceName	CoriantFileSwTypesDeviceName
	fwVersionMapDeviceFwVersion	CoriantFileSwTypesDeviceFwVersion

CurrentFwVersionEntry
SEQUENCE
	currentFwVersionEquipmentEntity	RowPointer
	currentFwVersionFwEquipmentType	CoriantTypesEquipmentType
	currentFwVersionDeviceName	CoriantFileSwTypesDeviceName
	currentFwVersionDeviceFwVersion	CoriantFileSwTypesDeviceFwVersion
	currentFwVersionFwState	INTEGER

RollbackPointEntry
SEQUENCE
	rollbackPointId	Unsigned32
	rollbackPointCreationTime	IetfYangTypesDateAndTime
	rollbackPointCreationTrigger	CoriantTypesUserName
	rollbackPointDescription	OCTET STRING
	rollbackPointType	INTEGER

LogServerEntry
SEQUENCE
	logServerName	OCTET STRING
	logServerIpAddress	IetfInetTypesIpv4Address
	logServerTransport	INTEGER
	logServerPort	IetfInetTypesPortNumber
	logServerDestinationFacilityType	CoriantTypesEnableSwitch
	logServerDestinationFacility	OCTET STRING

LogFacilityEntry
SEQUENCE
	logFacilityLogSelectorFacility	INTEGER
	logFacilityLogSelectorSeverity	INTEGER
	logFacilityCompareOp	INTEGER

NtpAssociationEntry
SEQUENCE
	ntpAssociationSource	IetfInetTypesIpv4AddressNoZone
	ntpAssociationType	INTEGER
	ntpAssociationPreferredNtpAssociation	TruthValue
	ntpAssociationNtpAdminState	INTEGER

NtpAssociationStatusEntry
SEQUENCE
	ntpAssociationStatusNtpAssociationRefid	OCTET STRING
	ntpAssociationStatusNtpStratum	Unsigned32
	ntpAssociationStatusNtpPollingInterval	Unsigned32
	ntpAssociationStatusNtpPrecision	OCTET STRING
	ntpAssociationStatusNtpAssociationOffset	OCTET STRING
	ntpAssociationStatusNtpAssociationReach	Unsigned32
	ntpAssociationStatusNtpAssociationDelay	OCTET STRING
	ntpAssociationStatusNtpAssociationDispersion	OCTET STRING

BitErrorRatePreFecEntry
SEQUENCE
	bitErrorRatePreFecInstant	OCTET STRING
	bitErrorRatePreFecAvg	OCTET STRING
	bitErrorRatePreFecMin	OCTET STRING
	bitErrorRatePreFecMax	OCTET STRING

BitErrorRatePostFecEntry
SEQUENCE
	bitErrorRatePostFecInstant	OCTET STRING
	bitErrorRatePostFecAvg	OCTET STRING
	bitErrorRatePostFecMin	OCTET STRING
	bitErrorRatePostFecMax	OCTET STRING

InUtilizationEntry
SEQUENCE
	inUtilizationInstant	CoriantTypesPercentage
	inUtilizationAvg	CoriantTypesPercentage
	inUtilizationMin	CoriantTypesPercentage
	inUtilizationMax	CoriantTypesPercentage

OutUtilizationEntry
SEQUENCE
	outUtilizationInstant	CoriantTypesPercentage
	outUtilizationAvg	CoriantTypesPercentage
	outUtilizationMin	CoriantTypesPercentage
	outUtilizationMax	CoriantTypesPercentage

OduDelayEntry
SEQUENCE
	oduDelayInstant	OCTET STRING
	oduDelayAvg	OCTET STRING
	oduDelayMin	OCTET STRING
	oduDelayMax	OCTET STRING

InOpticalPowerEntry
SEQUENCE
	inOpticalPowerInstant	CoriantTypesOpticalPower
	inOpticalPowerAvg	CoriantTypesOpticalPower
	inOpticalPowerMin	CoriantTypesOpticalPower
	inOpticalPowerMax	CoriantTypesOpticalPower

OutOpticalPowerEntry
SEQUENCE
	outOpticalPowerInstant	CoriantTypesOpticalPower
	outOpticalPowerAvg	CoriantTypesOpticalPower
	outOpticalPowerMin	CoriantTypesOpticalPower
	outOpticalPowerMax	CoriantTypesOpticalPower

DifferentialGroupDelayEntry
SEQUENCE
	differentialGroupDelayInstant	Unsigned32
	differentialGroupDelayAvg	Unsigned32
	differentialGroupDelayMin	Unsigned32
	differentialGroupDelayMax	Unsigned32

ChromaticDispersionEntry
SEQUENCE
	chromaticDispersionInstant	INTEGER
	chromaticDispersionAvg	INTEGER
	chromaticDispersionMin	INTEGER
	chromaticDispersionMax	INTEGER

OsnrEntry
SEQUENCE
	osnrInstant	CoriantTypesDBPrecision1
	osnrAvg	CoriantTypesDBPrecision1
	osnrMin	CoriantTypesDBPrecision1
	osnrMax	CoriantTypesDBPrecision1

QFactorEntry
SEQUENCE
	qFactorInstant	CoriantTypesDBPrecision1
	qFactorAvg	CoriantTypesDBPrecision1
	qFactorMin	CoriantTypesDBPrecision1
	qFactorMax	CoriantTypesDBPrecision1

PolarizationDependentLossEntry
SEQUENCE
	polarizationDependentLossInstant	CoriantTypesDBPrecision1
	polarizationDependentLossAvg	CoriantTypesDBPrecision1
	polarizationDependentLossMin	CoriantTypesDBPrecision1
	polarizationDependentLossMax	CoriantTypesDBPrecision1

InOpticalFrequencyEntry
SEQUENCE
	inOpticalFrequencyInstant	Unsigned32
	inOpticalFrequencyAvg	Unsigned32
	inOpticalFrequencyMin	Unsigned32
	inOpticalFrequencyMax	Unsigned32

OutOpticalFrequencyEntry
SEQUENCE
	outOpticalFrequencyInstant	Unsigned32
	outOpticalFrequencyAvg	Unsigned32
	outOpticalFrequencyMin	Unsigned32
	outOpticalFrequencyMax	Unsigned32

InOpticalPowerLaneHighEntry
SEQUENCE
	inOpticalPowerLaneHighInstant	CoriantTypesOpticalPower
	inOpticalPowerLaneHighAvg	CoriantTypesOpticalPower
	inOpticalPowerLaneHighMin	CoriantTypesOpticalPower
	inOpticalPowerLaneHighMax	CoriantTypesOpticalPower

InOpticalPowerLaneLowEntry
SEQUENCE
	inOpticalPowerLaneLowInstant	CoriantTypesOpticalPower
	inOpticalPowerLaneLowAvg	CoriantTypesOpticalPower
	inOpticalPowerLaneLowMin	CoriantTypesOpticalPower
	inOpticalPowerLaneLowMax	CoriantTypesOpticalPower

InOpticalPowerLaneTotalEntry
SEQUENCE
	inOpticalPowerLaneTotalInstant	CoriantTypesOpticalPower
	inOpticalPowerLaneTotalAvg	CoriantTypesOpticalPower
	inOpticalPowerLaneTotalMin	CoriantTypesOpticalPower
	inOpticalPowerLaneTotalMax	CoriantTypesOpticalPower

OutOpticalPowerLaneHighEntry
SEQUENCE
	outOpticalPowerLaneHighInstant	CoriantTypesOpticalPower
	outOpticalPowerLaneHighAvg	CoriantTypesOpticalPower
	outOpticalPowerLaneHighMin	CoriantTypesOpticalPower
	outOpticalPowerLaneHighMax	CoriantTypesOpticalPower

OutOpticalPowerLaneLowEntry
SEQUENCE
	outOpticalPowerLaneLowInstant	CoriantTypesOpticalPower
	outOpticalPowerLaneLowAvg	CoriantTypesOpticalPower
	outOpticalPowerLaneLowMin	CoriantTypesOpticalPower
	outOpticalPowerLaneLowMax	CoriantTypesOpticalPower

OutOpticalPowerLaneTotalEntry
SEQUENCE
	outOpticalPowerLaneTotalInstant	CoriantTypesOpticalPower
	outOpticalPowerLaneTotalAvg	CoriantTypesOpticalPower
	outOpticalPowerLaneTotalMin	CoriantTypesOpticalPower
	outOpticalPowerLaneTotalMax	CoriantTypesOpticalPower

ModuleTemperatureEntry
SEQUENCE
	moduleTemperatureInstant	CoriantTypesTemperaturePrecision3
	moduleTemperatureAvg	CoriantTypesTemperaturePrecision3
	moduleTemperatureMin	CoriantTypesTemperaturePrecision3
	moduleTemperatureMax	CoriantTypesTemperaturePrecision3

InletTemperatureEntry
SEQUENCE
	inletTemperatureInstant	CoriantTypesTemperaturePrecision3
	inletTemperatureAvg	CoriantTypesTemperaturePrecision3
	inletTemperatureMin	CoriantTypesTemperaturePrecision3
	inletTemperatureMax	CoriantTypesTemperaturePrecision3

OutletTemperatureEntry
SEQUENCE
	outletTemperatureInstant	CoriantTypesTemperaturePrecision3
	outletTemperatureAvg	CoriantTypesTemperaturePrecision3
	outletTemperatureMin	CoriantTypesTemperaturePrecision3
	outletTemperatureMax	CoriantTypesTemperaturePrecision3

Defined Values

groove		1.3.6.1.4.1.42229.1.2
SNMP MIB for Groove G30 release 2.1.0
MODULE-IDENTITY

coriant		1.3.6.1.4.1.42229
OBJECT IDENTIFIER

products		1.3.6.1.4.1.42229.1
OBJECT IDENTIFIER

fault		1.3.6.1.4.1.42229.1.2.1
OBJECT IDENTIFIER

notificationInfo		1.3.6.1.4.1.42229.1.2.1.1
OBJECT IDENTIFIER

notificationObject		1.3.6.1.4.1.42229.1.2.1.1.1
OBJECT IDENTIFIER

notificationFmEntity		1.3.6.1.4.1.42229.1.2.1.1.1.1
The management object instance which the alarm or condition is reported against.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

notificationConditionType		1.3.6.1.4.1.42229.1.2.1.1.1.2
Identifies the current standing conditions which cause alarms and/or events.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesConditionType

notificationLocation		1.3.6.1.4.1.42229.1.2.1.1.1.3
Indicates if the alarm or event location is near end or far end.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementLocation

notificationDirection		1.3.6.1.4.1.42229.1.2.1.1.1.4
Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementDirection

notificationTimePeriod		1.3.6.1.4.1.42229.1.2.1.1.1.5
Indicates the time-period increments during which PM data is collected.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementTimePeriod

notificationServiceAffect		1.3.6.1.4.1.42229.1.2.1.1.1.6
Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesServiceAffectFm

notificationSeverityLevel		1.3.6.1.4.1.42229.1.2.1.1.1.7
Indicates the notification code (severity level) associated with the alarm type of service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesSeverityLevel

notificationOccurrenceDateTime		1.3.6.1.4.1.42229.1.2.1.1.1.8
Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

notificationConditionDescription		1.3.6.1.4.1.42229.1.2.1.1.1.9
Describes the condition that caused the alarm.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

notificationAlarmConditionType		1.3.6.1.4.1.42229.1.2.1.1.1.10
Alarm condition types, for example, standing or transient.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	standing(1), transient(2)

notificationLastSeverityLevel		1.3.6.1.4.1.42229.1.2.1.1.1.11
Indicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesSeverityLevel

notificationExtensionDescription		1.3.6.1.4.1.42229.1.2.1.1.1.12
The description in alarm notification to provide additional information.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

notificationFmEntityType		1.3.6.1.4.1.42229.1.2.1.1.1.13
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesEntityTypeFm

notificationTrap		1.3.6.1.4.1.42229.1.2.1.2
OBJECT IDENTIFIER

alarmNotification		1.3.6.1.4.1.42229.1.2.1.2.1
Status: current	Access: read-only
NOTIFICATION-TYPE

notAlarmedEventNotification		1.3.6.1.4.1.42229.1.2.1.2.2
Status: current	Access: read-only
NOTIFICATION-TYPE

alarmProfile		1.3.6.1.4.1.42229.1.2.1.4
OBJECT IDENTIFIER

alarmProfileTable		1.3.6.1.4.1.42229.1.2.1.4.1
Alarm profile defines the severity profile of alarm and event.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlarmProfileEntry

alarmProfileEntry		1.3.6.1.4.1.42229.1.2.1.4.1.1
Entry of alarmProfileTable
Status: current	Access: not-accessible
OBJECT-TYPE
	AlarmProfileEntry

alarmProfileId		1.3.6.1.4.1.42229.1.2.1.4.1.1.1
alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

alarmProfileENTR		1.3.6.1.4.1.42229.1.2.1.5
OBJECT IDENTIFIER

alarmProfileENTRTable		1.3.6.1.4.1.42229.1.2.1.5.1
The list includes alarm/event entries of an alarm-profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlarmProfileENTREntry

alarmProfileENTREntry		1.3.6.1.4.1.42229.1.2.1.5.1.1
Entry of alarmProfileENTRTable
Status: current	Access: not-accessible
OBJECT-TYPE
	AlarmProfileENTREntry

alarmProfileENTRConditionType		1.3.6.1.4.1.42229.1.2.1.5.1.1.1
Identifies the current standing conditions which cause conditions and/or events.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesConditionType

alarmProfileENTRFmEntityType		1.3.6.1.4.1.42229.1.2.1.5.1.1.2
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesEntityTypeFm

alarmProfileENTRTimePeriod		1.3.6.1.4.1.42229.1.2.1.5.1.1.3
Indicates the time-period increments during which PM data is collected.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementTimePeriod

alarmProfileENTRSeverityLevelSa		1.3.6.1.4.1.42229.1.2.1.5.1.1.4
Indicates the notification code (severity level) associated with the condition type of service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesSeverityLevel

alarmProfileENTRSeverityLevelNsa		1.3.6.1.4.1.42229.1.2.1.5.1.1.5
Indicates the notification code (severity level) associated with the condition type of non-service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesSeverityLevel

standingCondition		1.3.6.1.4.1.42229.1.2.1.6
OBJECT IDENTIFIER

standingConditionTable		1.3.6.1.4.1.42229.1.2.1.6.1
The list includes active standing alarms.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StandingConditionEntry

standingConditionEntry		1.3.6.1.4.1.42229.1.2.1.6.1.1
Entry of standingConditionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	StandingConditionEntry

standingConditionFmEntity		1.3.6.1.4.1.42229.1.2.1.6.1.1.1
The management object instance which the alarm or condition is reported against.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

standingConditionConditionType		1.3.6.1.4.1.42229.1.2.1.6.1.1.2
Identifies the current standing conditions which cause alarms and/or events.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesConditionType

standingConditionLocation		1.3.6.1.4.1.42229.1.2.1.6.1.1.3
Indicates if the alarm or event location is near end or far end.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementLocation

standingConditionDirection		1.3.6.1.4.1.42229.1.2.1.6.1.1.4
Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementDirection

standingConditionTimePeriod		1.3.6.1.4.1.42229.1.2.1.6.1.1.5
Indicates the time-period increments during which PM data is collected.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementTimePeriod

standingConditionServiceAffect		1.3.6.1.4.1.42229.1.2.1.6.1.1.6
Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesServiceAffectFm

standingConditionSeverityLevel		1.3.6.1.4.1.42229.1.2.1.6.1.1.7
Indicates the notification code (severity level) associated with the alarm type of service affecting.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesSeverityLevel

standingConditionOccurrenceDateTime		1.3.6.1.4.1.42229.1.2.1.6.1.1.8
Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

standingConditionConditionDescription		1.3.6.1.4.1.42229.1.2.1.6.1.1.9
Describes the condition that caused the alarm.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

standingConditionFmEntityType		1.3.6.1.4.1.42229.1.2.1.6.1.1.10
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFmtypesEntityTypeFm

ne		1.3.6.1.4.1.42229.1.2.2
OBJECT IDENTIFIER

neInfo		1.3.6.1.4.1.42229.1.2.2.1
OBJECT IDENTIFIER

neId		1.3.6.1.4.1.42229.1.2.2.1.1
Network Element's system identification code. Note that this is unique identifier for each NE. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

neName		1.3.6.1.4.1.42229.1.2.2.1.2
Name assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The different function from ne-id is that user can keep ne-id unchanged, which uniquely identifies the NE, and update ne-name if necessary. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

neType		1.3.6.1.4.1.42229.1.2.2.1.3
Type of the NE default value :GROOVE_G30
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

neLocation		1.3.6.1.4.1.42229.1.2.2.1.4
Name of the location of this particular NE
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

neSite		1.3.6.1.4.1.42229.1.2.2.1.5
Name or CLLI of the site where this NE is located
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

neAltitude		1.3.6.1.4.1.42229.1.2.2.1.6
The altitude of the Network Element in meters UNITS:meters
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

neVendor		1.3.6.1.4.1.42229.1.2.2.1.7
Vendor name of this NE default value :Coriant
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

neTemperature		1.3.6.1.4.1.42229.1.2.2.1.8
Ambient temperature sensed by the primary shelf for NE level
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

system		1.3.6.1.4.1.42229.1.2.2.2
OBJECT IDENTIFIER

systemUnknownPluggableReport		1.3.6.1.4.1.42229.1.2.2.2.1
The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

systemPowerConsumptionCurrent		1.3.6.1.4.1.42229.1.2.2.2.2
Current power consumption of the system.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPower

systemPowerConsumptionEstimatedMax		1.3.6.1.4.1.42229.1.2.2.2.3
Derived maximal power consumption around room temperature.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPower

systemFactoryResetButton		1.3.6.1.4.1.42229.1.2.2.2.4
The attribute will enable/disable factory reset button function on the NE. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

console		1.3.6.1.4.1.42229.1.2.2.3
OBJECT IDENTIFIER

consoleBaudRate		1.3.6.1.4.1.42229.1.2.2.3.1
The baud rate of console port default value :9600
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	t9600(6), t19200(7), t38400(8), t57600(11), t115200(12)

equipment		1.3.6.1.4.1.42229.1.2.3
OBJECT IDENTIFIER

shelf		1.3.6.1.4.1.42229.1.2.3.1
OBJECT IDENTIFIER

shelfTable		14.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ShelfEntry

shelfEntry		14.1.1
Entry of shelfTable
Status: current	Access: not-accessible
OBJECT-TYPE
	ShelfEntry

shelfId		14.1.1.1
Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesShelfId

shelfLocation		14.1.1.2
Name of the location of this particular shelf.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

shelfInletTemperature		14.1.1.3
shelf inlet temperature
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

shelfOutletTemperature		14.1.1.4
shelf outlet temperature
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

shelfAdminStatus		14.1.1.5
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

shelfOperStatus		14.1.1.6
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

shelfAvailStatus		14.1.1.7
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

shelfAliasName		14.1.1.8
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

slot		1.3.6.1.4.1.42229.1.2.3.2
OBJECT IDENTIFIER

slotTable		15.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotEntry

slotEntry		15.1.1
Entry of slotTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SlotEntry

slotId		15.1.1.1
Identifier of the slot. It shall be an integer number and assigned implicitly by the system.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSlotId

slotActualCardType		15.1.1.2
Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEquipmentType

slotPossibleCardTypes		15.1.1.3
Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

slotAdminStatus		15.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

slotOperStatus		15.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

slotAvailStatus		15.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

slotAliasName		15.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

card		1.3.6.1.4.1.42229.1.2.3.3
OBJECT IDENTIFIER

cardTable		1.3.6.1.4.1.42229.1.2.3.3.1
Card is a container carried by a slot.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CardEntry

cardEntry		1.3.6.1.4.1.42229.1.2.3.3.1.1
Entry of cardTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CardEntry

cardRequiredType		1.3.6.1.4.1.42229.1.2.3.3.1.1.1
The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesCardType

cardEquipmentName		1.3.6.1.4.1.42229.1.2.3.3.1.1.2
The attribute indicates an additional field to identify the module.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

cardAdminStatus		1.3.6.1.4.1.42229.1.2.3.3.1.1.3
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

cardOperStatus		1.3.6.1.4.1.42229.1.2.3.3.1.1.4
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

cardAvailStatus		1.3.6.1.4.1.42229.1.2.3.3.1.1.5
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

cardAliasName		1.3.6.1.4.1.42229.1.2.3.3.1.1.6
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

cardFanSpeedRate		1.3.6.1.4.1.42229.1.2.3.3.1.1.7
The fan speed of percentage. Conditions:../required-type = 'FAN'
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

cardSwitchingType		1.3.6.1.4.1.42229.1.2.3.3.1.1.8
The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') default value :otn
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	otn(0), tdm(1), optical(2), packet(3)

cardTemperature		1.3.6.1.4.1.42229.1.2.3.3.1.1.9
Temperature at the monitoring point.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

cardMode		1.3.6.1.4.1.42229.1.2.3.3.1.1.10
Specify the card mode, e.g. normal or regen. default value :normal
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), normal(1), regen(2)

subslot		1.3.6.1.4.1.42229.1.2.3.4
OBJECT IDENTIFIER

subslotTable		50.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SubslotEntry

subslotEntry		50.1.1
Entry of subslotTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SubslotEntry

subslotId		50.1.1.1
Identifier of the subslot.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSlotId

subslotActualCardType		50.1.1.2
Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEquipmentType

subslotPossibleCardTypes		50.1.1.3
Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

subslotAdminStatus		50.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subslotOperStatus		50.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subslotAvailStatus		50.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

subslotAliasName		50.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

subcard		1.3.6.1.4.1.42229.1.2.3.5
OBJECT IDENTIFIER

subcardTable		1.3.6.1.4.1.42229.1.2.3.5.1
Subcard is a container carried by a subslot.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SubcardEntry

subcardEntry		1.3.6.1.4.1.42229.1.2.3.5.1.1
Entry of subcardTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SubcardEntry

subcardRequiredType		1.3.6.1.4.1.42229.1.2.3.5.1.1.1
The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesCardType

subcardEquipmentName		1.3.6.1.4.1.42229.1.2.3.5.1.1.2
The attribute indicates an additional field to identify the module.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

subcardAdminStatus		1.3.6.1.4.1.42229.1.2.3.5.1.1.3
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subcardOperStatus		1.3.6.1.4.1.42229.1.2.3.5.1.1.4
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subcardAvailStatus		1.3.6.1.4.1.42229.1.2.3.5.1.1.5
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

subcardAliasName		1.3.6.1.4.1.42229.1.2.3.5.1.1.6
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

subcardTemperature		1.3.6.1.4.1.42229.1.2.3.5.1.1.7
Temperature at the monitoring point.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

port		1.3.6.1.4.1.42229.1.2.3.6
OBJECT IDENTIFIER

portTable		16.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortEntry

portEntry		16.1.1
Entry of portTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PortEntry

portId		16.1.1.1
The identifier is defined to uniquely identify the port.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPortId

portPossiblePluggableTypes		16.1.1.2
Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon')
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

portActualPluggableType		16.1.1.3
Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:../port-type != 'optical' default value :empty
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEquipmentType

portRxOpticalPower		16.1.1.4
Received optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portTxOpticalPower		16.1.1.5
Transmitted optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portRxOpticalPowerSelectedChannel		16.1.1.6
Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portRxOpticalPowerLane1		16.1.1.7
Received optical power of lane 1.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portRxOpticalPowerLane2		16.1.1.8
Received optical power of lane 2.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portRxOpticalPowerLane3		16.1.1.9
Received optical power of lane 3.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portRxOpticalPowerLane4		16.1.1.10
Received optical power of lane 4.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portTxOpticalPowerLane1		16.1.1.11
Transmitted optical power lane 1.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portTxOpticalPowerLane2		16.1.1.12
Transmitted optical power lane 2.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portTxOpticalPowerLane3		16.1.1.13
Transmitted optical power lane 3.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portTxOpticalPowerLane4		16.1.1.14
Transmitted optical power lane 4.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

portDirectionType		16.1.1.15
Supported direction of the optical port.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTypeOfDirection

portName		16.1.1.16
The name of the port. default value :unspecified
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

portType		16.1.1.17
The type of port. Needs to be provided upon Port creation
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	client(1), line(2), clientSubport(3), optical(4), otdr(5), opticalNomon(6)

portMode		16.1.1.18
The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPortMode

portAdminStatus		16.1.1.19
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

portOperStatus		16.1.1.20
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

portAvailStatus		16.1.1.21
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

portAliasName		16.1.1.22
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

portServiceLabel		16.1.1.23
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

portConnectedTo		16.1.1.24
Indicate neighbour port/facility entity to which the current port/facility is connected to.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

portArcConfig		16.1.1.25
The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	alm(1), nalmQi(2), nalm(3)

portArcState		16.1.1.26
The current mode of the Alarm Report Control (ARC).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	alm(1), nalmQi(2), nalm(3)

portArcSubState		16.1.1.27
Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), nalmCd(1), nalmNr(2)

portArcTimer		16.1.1.28
The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..10080

portArcRemainingTime		16.1.1.29
The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

portExternalConnectivity		16.1.1.30
Indicates the port is connected externally or not. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

subport		1.3.6.1.4.1.42229.1.2.3.7
OBJECT IDENTIFIER

subportTable		4.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SubportEntry

subportEntry		4.1.1
Entry of subportTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SubportEntry

subportId		4.1.1.1
The identifier is defined to uniquely identify the subport.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPortId

subportPortName		4.1.1.2
The name of the port. default value :unspecified
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

subportPortType		4.1.1.3
The type of port. Needs to be provided upon Port creation
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	client(1), line(2), clientSubport(3), optical(4), otdr(5), opticalNomon(6)

subportPortMode		4.1.1.4
The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPortMode

subportAdminStatus		4.1.1.5
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subportOperStatus		4.1.1.6
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

subportAvailStatus		4.1.1.7
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

subportAliasName		4.1.1.8
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

subportServiceLabel		4.1.1.9
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

subportConnectedTo		4.1.1.10
Indicate neighbour port/facility entity to which the current port/facility is connected to.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

subportArcConfig		4.1.1.11
The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	alm(1), nalmQi(2), nalm(3)

subportArcState		4.1.1.12
The current mode of the Alarm Report Control (ARC).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	alm(1), nalmQi(2), nalm(3)

subportArcSubState		4.1.1.13
Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), nalmCd(1), nalmNr(2)

subportArcTimer		4.1.1.14
The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..10080

subportArcRemainingTime		4.1.1.15
The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

subportRxOpticalPower		4.1.1.16
Received optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

subportTxOpticalPower		4.1.1.17
Transmitted optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

subportExternalConnectivity		4.1.1.18
Indicates the port is connected externally or not. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

pluggable		1.3.6.1.4.1.42229.1.2.3.8
OBJECT IDENTIFIER

pluggableTable		1.3.6.1.4.1.42229.1.2.3.8.1
Represents the Pluggable object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PluggableEntry

pluggableEntry		1.3.6.1.4.1.42229.1.2.3.8.1.1
Entry of pluggableTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PluggableEntry

pluggableRequiredType		1.3.6.1.4.1.42229.1.2.3.8.1.1.1
The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPluggableType

pluggableFormFactor		1.3.6.1.4.1.42229.1.2.3.8.1.1.2
Indicating the exact form factor of the pluggable. default value :Unrecognized
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPluggableFormFactor

pluggableInterfaceType		1.3.6.1.4.1.42229.1.2.3.8.1.1.3
Indicating interface type of the pluggable. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

pluggableLaserSource		1.3.6.1.4.1.42229.1.2.3.8.1.1.4
The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-available
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	txLoShared(1), txLoIndependent(2), notAvailable(3)

pluggableHwVersion		1.3.6.1.4.1.42229.1.2.3.8.1.1.5
The attribute Identifies the Hardware Version of the module that populates the slot.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

pluggableVendor		1.3.6.1.4.1.42229.1.2.3.8.1.1.6
Vendor information.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

pluggableSerialNumber		1.3.6.1.4.1.42229.1.2.3.8.1.1.7
This is the value of serial number stored in EEPROM of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

pluggableFwVersion		1.3.6.1.4.1.42229.1.2.3.8.1.1.8
Current Firmware (FW) version on the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

pluggablePartNumber		1.3.6.1.4.1.42229.1.2.3.8.1.1.9
Identifies the Part Number of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

pluggableClei		1.3.6.1.4.1.42229.1.2.3.8.1.1.10
Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

pluggableEquipmentName		1.3.6.1.4.1.42229.1.2.3.8.1.1.11
The attribute indicates an additional field to identify the module.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

pluggableAdminStatus		1.3.6.1.4.1.42229.1.2.3.8.1.1.12
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

pluggableOperStatus		1.3.6.1.4.1.42229.1.2.3.8.1.1.13
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

pluggableAvailStatus		1.3.6.1.4.1.42229.1.2.3.8.1.1.14
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknown
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

pluggableAliasName		1.3.6.1.4.1.42229.1.2.3.8.1.1.15
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

pluggableTemperature		1.3.6.1.4.1.42229.1.2.3.8.1.1.16
Temperature at the monitoring point.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

amplifier		1.3.6.1.4.1.42229.1.2.3.9
OBJECT IDENTIFIER

amplifierTable		53.1
The list of optical amplifier on an equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AmplifierEntry

amplifierEntry		53.1.1
Entry of amplifierTable
Status: current	Access: not-accessible
OBJECT-TYPE
	AmplifierEntry

amplifierName		53.1.1.1
User-defined name assigned to identify a specific amplifier in the device
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

amplifierSupportingInputPort		53.1.1.2
Identifier of the supporting input port.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

amplifierSupportingOutputPort		53.1.1.3
Identifier of the supporting output port.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

amplifierAdminStatus		53.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

amplifierOperStatus		53.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

amplifierAvailStatus		53.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

amplifierAliasName		53.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

amplifierEnable		53.1.1.8
Configuration for enable or disable the amplifier. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

amplifierInputLosShutdown		53.1.1.9
Enable or disable the function of automatic shutdown per input LOS. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

amplifierControlMode		53.1.1.10
Control mode of the amplifier. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	manual(1), auto(2)

amplifierMode		53.1.1.11
The operating mode of the amplifier default value :constant-gain
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	constantPower(1), constantGain(2)

amplifierType		53.1.1.12
Type of the amplifier. default value :variable-gain-EDFA
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fixedGainEdfa(1), variableGainEdfa(2)

amplifierTargetGain		53.1.1.13
Setting gain to the amplifier for constant-gain mode in manual control mode.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

amplifierOperatingGain		53.1.1.14
Operating gain of the amplifier, which is the actually configured gain on the amplifier.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

amplifierGainAdjustment		53.1.1.15
The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

amplifierGainRangeMin		53.1.1.16
The minimum of settable gain.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

amplifierGainRangeMax		53.1.1.17
The maximum of settable gain. UNITS:dB
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

amplifierOutputPowerMon		53.1.1.18
Monitored aggregation signal output power. UNITS:dBm
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

amplifierOutputPowerMonWithAse		53.1.1.19
Monitored aggregation total output power including both signal and ASE. UNITS:dBm
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

amplifierInputPowerMon		53.1.1.20
Monitored aggregation input power. UNITS:dBm
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

amplifierOutputVoa		53.1.1.21
Configurable optical attenuation at output of the amplifier. default value :0.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

amplifierPowerBeforeOutputVoa		53.1.1.22
Monitored optical power after output VOA. UNITS:dBm
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

tdc		1.3.6.1.4.1.42229.1.2.3.10
OBJECT IDENTIFIER

tdcTable		1.3.6.1.4.1.42229.1.2.3.10.1
The list of optical tdc on an equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TdcEntry

tdcEntry		1.3.6.1.4.1.42229.1.2.3.10.1.1
Entry of tdcTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TdcEntry

tdcName		1.3.6.1.4.1.42229.1.2.3.10.1.1.1
User-defined name assigned to identify a specific tdc in the device
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

tdcSupportingInputPort		1.3.6.1.4.1.42229.1.2.3.10.1.1.2
Identifier of the supporting input port.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

tdcSupportingOutputPort		1.3.6.1.4.1.42229.1.2.3.10.1.1.3
Identifier of the supporting output port.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

tdcAdminStatus		1.3.6.1.4.1.42229.1.2.3.10.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

tdcOperStatus		1.3.6.1.4.1.42229.1.2.3.10.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

tdcAvailStatus		1.3.6.1.4.1.42229.1.2.3.10.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

tdcAliasName		1.3.6.1.4.1.42229.1.2.3.10.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

tdcMode		1.3.6.1.4.1.42229.1.2.3.10.1.1.8
Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	manual(1), auto(2)

tdcReferenceFrequency		1.3.6.1.4.1.42229.1.2.3.10.1.1.9
Indicating the reference wavelength of the TDC. UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFreq

tdcActualReferenceFrequency		1.3.6.1.4.1.42229.1.2.3.10.1.1.10
Indicating the actual reference wavelength of the TDC. UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tdcFrequencyRangeMin		1.3.6.1.4.1.42229.1.2.3.10.1.1.11
The minimum of supported wavelength. UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tdcFrequencyRangeMax		1.3.6.1.4.1.42229.1.2.3.10.1.1.12
The maximum of supported wavelength. UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tdcChromaticDispersion		1.3.6.1.4.1.42229.1.2.3.10.1.1.13
The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tdcChromaticDispersionAdjustment		1.3.6.1.4.1.42229.1.2.3.10.1.1.14
The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tdcActualChromaticDispersion		1.3.6.1.4.1.42229.1.2.3.10.1.1.15
The actual value of Chromatic Dispersion. UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tdcCdRangeMin		1.3.6.1.4.1.42229.1.2.3.10.1.1.16
The minimum of supported chromatic dispersion. UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tdcCdRangeMax		1.3.6.1.4.1.42229.1.2.3.10.1.1.17
The maximum of supported chromatic dispersion. UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

inventory		1.3.6.1.4.1.42229.1.2.3.12
OBJECT IDENTIFIER

inventoryTable		1.3.6.1.4.1.42229.1.2.3.12.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InventoryEntry

inventoryEntry		1.3.6.1.4.1.42229.1.2.3.12.1.1
Entry of inventoryTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InventoryEntry

inventoryEquipmentType		1.3.6.1.4.1.42229.1.2.3.12.1.1.1
The equipment type that the inventory data refers to
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	shelf(1), slot(2), card(3), port(4), pluggable(5), subslot(6), subcard(7)

inventoryShelfId		1.3.6.1.4.1.42229.1.2.3.12.1.1.2
Identifier of the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesShelfId

inventorySlotId		1.3.6.1.4.1.42229.1.2.3.12.1.1.3
Identifier of the slot.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSlotId

inventorySubslotId		1.3.6.1.4.1.42229.1.2.3.12.1.1.4
Identifier of the subslot.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSlotId

inventoryPortId		1.3.6.1.4.1.42229.1.2.3.12.1.1.5
Identifier of the port.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPortId

inventoryEquipmentVersion		1.3.6.1.4.1.42229.1.2.3.12.1.1.6
The attribute Identifies the Hardware Version of the module that populates the slot.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

inventoryModuleType		1.3.6.1.4.1.42229.1.2.3.12.1.1.7
This is the value of module type stored in EEPROM of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

inventoryVendor		1.3.6.1.4.1.42229.1.2.3.12.1.1.8
Vendor information.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

inventorySerialNumber		1.3.6.1.4.1.42229.1.2.3.12.1.1.9
This is the value of serial number stored in EEPROM of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

inventoryFwVersion		1.3.6.1.4.1.42229.1.2.3.12.1.1.10
Current Firmware (FW) version on the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

inventoryPartNumber		1.3.6.1.4.1.42229.1.2.3.12.1.1.11
Identifies the Part Number of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

inventoryClei		1.3.6.1.4.1.42229.1.2.3.12.1.1.12
Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. CLEI codes have 4 data elements: - Characters 1 to 4: Define family or subfamily of product. - Characters 5 to 7: Define features. - Character 8: Manufacturer and System ID. - Characters 9 and 10: Identifies version, issue, and release #.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

inventoryInterfaceType		1.3.6.1.4.1.42229.1.2.3.12.1.1.13
Indicating interface type of the pluggable. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

inventoryManufactureDate		1.3.6.1.4.1.42229.1.2.3.12.1.1.14
The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = 'subcard') or (../equipment-type = 'pluggable') default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

inventoryManufacturerNumber		1.3.6.1.4.1.42229.1.2.3.12.1.1.16
This is the value of manufacturer number stored in EEPROM of the equipment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..18)

led		1.3.6.1.4.1.42229.1.2.3.14
OBJECT IDENTIFIER

ledTable		1.3.6.1.4.1.42229.1.2.3.14.1
Attributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LedEntry

ledEntry		1.3.6.1.4.1.42229.1.2.3.14.1.1
Entry of ledTable
Status: current	Access: not-accessible
OBJECT-TYPE
	LedEntry

ledEquipmentType		1.3.6.1.4.1.42229.1.2.3.14.1.1.1
The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FAN
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

ledShelfId		1.3.6.1.4.1.42229.1.2.3.14.1.1.2
Identifier of the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesShelfId

ledSlotId		1.3.6.1.4.1.42229.1.2.3.14.1.1.3
Identifier of the slot.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSlotId

ledName		1.3.6.1.4.1.42229.1.2.3.14.1.1.4
The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_led
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

ledStatus		1.3.6.1.4.1.42229.1.2.3.14.1.1.5
Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), off(2), blink(3), red(4), redBlink(5), green(6), greenBlink(7), amber(8), amberBlink(9)

ledSubslotId		1.3.6.1.4.1.42229.1.2.3.14.1.1.6
Identifier of the subslot.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSubslotId

temperatureDetails		1.3.6.1.4.1.42229.1.2.3.15
OBJECT IDENTIFIER

temperatureDetailsTable		1.3.6.1.4.1.42229.1.2.3.15.1
The detailed information of temperature in each monitoring-point of current module
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TemperatureDetailsEntry

temperatureDetailsEntry		1.3.6.1.4.1.42229.1.2.3.15.1.1
Entry of temperatureDetailsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TemperatureDetailsEntry

temperatureDetailsMonitoringPoint		1.3.6.1.4.1.42229.1.2.3.15.1.1.1
The point of temperature monitoring. It could be the sensor or chip internal.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

temperatureDetailsTemperature		1.3.6.1.4.1.42229.1.2.3.15.1.1.2
Temperature at the monitoring point.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

temperatureDetailsTemperatureRangeLow		1.3.6.1.4.1.42229.1.2.3.15.1.1.3
The lowest temperature threshold of this monitoring point in working mode.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

temperatureDetailsTemperatureRangeHigh		1.3.6.1.4.1.42229.1.2.3.15.1.1.4
The highest temperature threshold of this monitoring point in working mode.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperature

otdr		1.3.6.1.4.1.42229.1.2.3.16
OBJECT IDENTIFIER

otdrTable		5.1
Container of OTDR.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OtdrEntry

otdrEntry		5.1.1
Entry of otdrTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OtdrEntry

otdrState		5.1.1.1
Indicating the current status of the OTDR. default value :not-available
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), idle(1), measuring(2), finished(3), fail(4)

otdrMeasurementTime		5.1.1.2
Indicating the time remaining in current measurement running. UNITS:second default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

otdrError		5.1.1.3
Error message produced when the measurement ends with error.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

otdrLaserStatus		5.1.1.4
Indicating the current status of the OTDR laser. default value :not-available
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), enabled(1), disabled(2)

otdrMeasurementPort		5.1.1.5
0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

otdrPort		1.3.6.1.4.1.42229.1.2.3.18
OBJECT IDENTIFIER

otdrPortTable		1.3.6.1.4.1.42229.1.2.3.18.1
Containing attributes of OTDR port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OtdrPortEntry

otdrPortEntry		1.3.6.1.4.1.42229.1.2.3.18.1.1
Entry of otdrPortTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OtdrPortEntry

otdrPortOtdrRange		1.3.6.1.4.1.42229.1.2.3.18.1.1.1
OTDR measurement range. UNITS:km default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	OtdrOtdrRange

otdrPortOtdrPulseWidth		1.3.6.1.4.1.42229.1.2.3.18.1.1.2
Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	OtdrOtdrPulseWidth

otdrPortOtdrMeasurementSpeed		1.3.6.1.4.1.42229.1.2.3.18.1.1.3
Indicating OTDR measurement speed. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fast(1), medium(3), slow(4), precision(5), auto(6)

otdrPortOtdrIor		1.3.6.1.4.1.42229.1.2.3.18.1.1.4
Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	OtdrOtdrIor

otdrPortOtdrFiberType		1.3.6.1.4.1.42229.1.2.3.18.1.1.5
Indicating fiber type to be measured. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ssmf(1), leaf(2), twrs(3), twc(4), allwave(5), dsf(6), ls(7), puresilica(8), twreach(9), vistacor(10), teralight(11), drakall(12), twplus(13), twminus(14), pslc(15), auto(16)

otdrPortOtdrLastMeasurement		1.3.6.1.4.1.42229.1.2.3.18.1.1.6
Indicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otdrPortOtdrResolution		1.3.6.1.4.1.42229.1.2.3.18.1.1.7
Specifies the OTDR data sampling resolution. UNITS:meter default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ops		1.3.6.1.4.1.42229.1.2.3.20
OBJECT IDENTIFIER

opsTable		67.1
The list of optical protection switch (ops) on an equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OpsEntry

opsEntry		67.1.1
Entry of opsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OpsEntry

opsName		67.1.1.1
The name assigned to identify a specific ops in the device
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

opsWorkingEntity		67.1.1.2
Identifier of the working port of the OPS.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

opsProtectionEntity		67.1.1.3
Identifier of the protection port of the OPS
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

opsAdminStatus		67.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

opsOperStatus		67.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

opsAvailStatus		67.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

opsAliasName		67.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

opsProtectionStatus		67.1.1.8
Indicates the status of the protection switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), manualSwitchToProtection(1), manualSwitchToWorking(2), forceSwitchToProtection(3), forceSwitchToWorking(4), lockoutOfProtection(5), signalFailureOnWorking(6), signalFailureOnProtection(7), signalDegradeOnWorking(8), signalDegradeOnProtection(9), doNotRevert(10), noRequest(11), waitToRestore(12)

opsActivePath		67.1.1.9
Indicating the active port of the protection switch. default value :unknown
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	working(1), protection(2), unknown(3)

opsRevertive		67.1.1.10
Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

opsWaitToRestore		67.1.1.11
Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second default value :300
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..3600

opsWorkingSwitchThreshold		67.1.1.12
The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

opsProtectionSwitchThreshold		67.1.1.13
The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

opsWorkingLosThreshold		67.1.1.14
The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

opsProtectionLosThreshold		67.1.1.15
The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

opsHoldoffTimer		67.1.1.16
The hold off time of the protection switch. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

opsWavelengthBand		67.1.1.17
Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	t1550(1), t1310(2)

subportStatistics		1.3.6.1.4.1.42229.1.2.3.25
OBJECT IDENTIFIER

subportStatisticsTable		1.3.6.1.4.1.42229.1.2.3.25.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SubportStatisticsEntry

subportStatisticsEntry		1.3.6.1.4.1.42229.1.2.3.25.1.1
Entry of subportStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SubportStatisticsEntry

subportStatisticsEntryLastClear		1.3.6.1.4.1.42229.1.2.3.25.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

portStatistics		1.3.6.1.4.1.42229.1.2.3.26
OBJECT IDENTIFIER

portStatisticsTable		1.3.6.1.4.1.42229.1.2.3.26.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortStatisticsEntry

portStatisticsEntry		1.3.6.1.4.1.42229.1.2.3.26.1.1
Entry of portStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PortStatisticsEntry

portStatisticsEntryLastClear		1.3.6.1.4.1.42229.1.2.3.26.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

subcardStatistics		1.3.6.1.4.1.42229.1.2.3.27
OBJECT IDENTIFIER

subcardStatisticsTable		1.3.6.1.4.1.42229.1.2.3.27.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SubcardStatisticsEntry

subcardStatisticsEntry		1.3.6.1.4.1.42229.1.2.3.27.1.1
Entry of subcardStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SubcardStatisticsEntry

subcardStatisticsEntryLastClear		1.3.6.1.4.1.42229.1.2.3.27.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

cardStatistics		1.3.6.1.4.1.42229.1.2.3.28
OBJECT IDENTIFIER

cardStatisticsTable		1.3.6.1.4.1.42229.1.2.3.28.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CardStatisticsEntry

cardStatisticsEntry		1.3.6.1.4.1.42229.1.2.3.28.1.1
Entry of cardStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CardStatisticsEntry

cardStatisticsEntryLastClear		1.3.6.1.4.1.42229.1.2.3.28.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

shelfStatistics		1.3.6.1.4.1.42229.1.2.3.29
OBJECT IDENTIFIER

shelfStatisticsTable		1.3.6.1.4.1.42229.1.2.3.29.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ShelfStatisticsEntry

shelfStatisticsEntry		1.3.6.1.4.1.42229.1.2.3.29.1.1
Entry of shelfStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	ShelfStatisticsEntry

shelfStatisticsEntryLastClear		1.3.6.1.4.1.42229.1.2.3.29.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

services		1.3.6.1.4.1.42229.1.2.4
OBJECT IDENTIFIER

otn		1.3.6.1.4.1.42229.1.2.4.1
OBJECT IDENTIFIER

eth10g		0.1
OBJECT IDENTIFIER

eth10gTable		0.1.1
Represents the 10GBE object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth10gEntry

eth10gEntry		0.1.1.1
Entry of eth10gTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth10gEntry

eth10gEthFecType		0.1.1.1.1
The FEC working type of etyn port. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth10gEthFecTypeState		0.1.1.1.2
The FEC working state of etyn port. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth10gTransmitInterpacketgap		0.1.1.1.3
Specifies the minimum transmit IPG value. default value :8
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	8..12

eth10gGfpPayloadFcs		0.1.1.1.4
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth10gMappingMode		0.1.1.1.5
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

eth10gAdminStatus		0.1.1.1.6
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth10gOperStatus		0.1.1.1.7
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth10gAvailStatus		0.1.1.1.8
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

eth10gAliasName		0.1.1.1.9
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

eth10gClientShutdown		0.1.1.1.10
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth10gClientShutdownHoldoffTimer		0.1.1.1.11
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

eth10gNearEndAls		0.1.1.1.12
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth10gAlsDegradeMode		0.1.1.1.13
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth10gLoopbackEnable		0.1.1.1.14
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth10gLoopbackType		0.1.1.1.15
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

eth10gTestSignalType		0.1.1.1.16
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

eth10gTestSignalEnable		0.1.1.1.17
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

eth10gServiceLabel		0.1.1.1.18
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

eth10gLldpStatusIf		0.1.1.1.19
Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), rxonly(2), disabled(4)

eth10gUpiValue		0.1.1.1.20
The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), g709(1), gsupp43(2)

eth10gHoldoffSignal		0.1.1.1.21
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

testSignalFacilityStatus		0.2
OBJECT IDENTIFIER

testSignalFacilityStatusTable		0.2.1
Test signal status for current facility.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TestSignalFacilityStatusEntry

testSignalFacilityStatusEntry		0.2.1.1
Entry of testSignalFacilityStatusTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TestSignalFacilityStatusEntry

testSignalFacilityStatusPrbsSync		0.2.1.1.1
The test result of PRBS Synchronization default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), inSync(1), outSync(2), errSync(3)

testSignalFacilityStatusTestTimeDuration		0.2.1.1.2
The time duration of signal test UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

testSignalFacilityStatusPrbsBitErrorCount		0.2.1.1.3
The counting of bit error by PRBS Synchronization
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesGauge64

lldpRemoteSystem		0.3
OBJECT IDENTIFIER

lldpRemoteSystemTable		0.3.1
List of LLDP neighbors.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LldpRemoteSystemEntry

lldpRemoteSystemEntry		0.3.1.1
Entry of lldpRemoteSystemTable
Status: current	Access: not-accessible
OBJECT-TYPE
	LldpRemoteSystemEntry

lldpRemoteSystemLldpRemoteIndex		0.3.1.1.1
This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

lldpRemoteSystemRemoteChassisIdSubtype		0.3.1.1.2
This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	chassiscomponent(1), interfacealias(2), portcomponent(3), macaddress(4), networkaddress(5), interfacename(6), local(7)

lldpRemoteSystemRemoteChassisId		0.3.1.1.3
This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

lldpRemoteSystemRemotePortIdSubtype		0.3.1.1.4
This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	interfacealias(1), portcomponent(2), macaddress(3), networkaddress(4), interfacename(5), agentcircuitid(6), local(7)

lldpRemoteSystemRemotePortId		0.3.1.1.5
This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

lldpRemoteSystemRemotePortDesc		0.3.1.1.6
The string value used to identify the description of the given port associated with the remote system.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

lldpRemoteSystemRemoteSysName		0.3.1.1.7
The string value used to identify the system name of the remote system. sys-name: system name
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

lldpRemoteSystemRemoteSysDesc		0.3.1.1.8
The string value used to identify the system description of the remote system. sys-desc: system description
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

lldpRemoteSystemRemoteSysCapSupported		0.3.1.1.9
This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. sys-cap-supported: supported system capability
Status: current	Access: read-only
OBJECT-TYPE
	LldpLldpSysCap

lldpRemoteSystemRemoteSysCapEnabled		0.3.1.1.10
This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality.
Status: current	Access: read-only
OBJECT-TYPE
	LldpLldpSysCap

remoteManAddresses		0.4
OBJECT IDENTIFIER

remoteManAddressesTable		0.4.1
List of management addresses of LLDP neighbor. man:managment, remote management addresses
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RemoteManAddressesEntry

remoteManAddressesEntry		0.4.1.1
Entry of remoteManAddressesTable
Status: current	Access: not-accessible
OBJECT-TYPE
	RemoteManAddressesEntry

remoteManAddressesRemoteManAddrSubtype		0.4.1.1.1
The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

remoteManAddressesRemoteManAddr		0.4.1.1.2
The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: address
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..62)

remoteManAddressesRemoteManAddrIfSubtype		0.4.1.1.3
This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention. man: management addr: address
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

remoteManAddressesRemoteManAddrIfId		0.4.1.1.4
The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: address
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

remoteManAddressesRemoteManAddrOid		0.4.1.1.5
The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifier
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

odu		0.5
OBJECT IDENTIFIER

oduTable		0.5.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OduEntry

oduEntry		0.5.1.1
Entry of oduTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OduEntry

odutypeL1		0.5.1.1.1
Level 1 ODU type
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOduType

oduidL1		0.5.1.1.2
Identifier of level 1 ODU
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

odutypeL2		0.5.1.1.3
Level 2 ODU type
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOduType

oduidL2		0.5.1.1.4
Identifier of level 2 ODU
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

odutypeL3		0.5.1.1.5
Level 3 ODU type
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOduType

oduidL3		0.5.1.1.6
Identifier of level 3 ODU
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

odutypeL4		0.5.1.1.7
Level 4 ODU type
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOduType

oduidL4		0.5.1.1.8
Identifier of level 4 ODU
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

oduAdminStatus		0.5.1.1.9
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oduOperStatus		0.5.1.1.10
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oduAvailStatus		0.5.1.1.11
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

oduAliasName		0.5.1.1.12
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

oduServiceLabel		0.5.1.1.13
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

oduTribSlot		0.5.1.1.14
Tributary slots of ODU, range 1 to 80
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNumberList

oduRxPayloadType		0.5.1.1.15
Received payload-type of ODU
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0|4)

oduTxPayloadType		0.5.1.1.16
Transmitter payload-type of ODU
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0|4)

oduNimEnable		0.5.1.1.17
The enable switching of nim function default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oduDelayMeasurementEnable		0.5.1.1.18
The enable switching of delay-measurement function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oduOpuConfigActual		0.5.1.1.19
The actual opu configuration type default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), intact(1), client(2), mux(3)

oduClientSignalType		0.5.1.1.20
The ODUflex rate for special signal type default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), fc8g(1), fc16g(2)

oduExpSapi		0.5.1.1.21
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduExpDapi		0.5.1.1.22
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduExpOperator		0.5.1.1.23
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

oduTxSapi		0.5.1.1.24
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduTxDapi		0.5.1.1.25
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduTxOperator		0.5.1.1.26
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

oduTimDefectMode		0.5.1.1.27
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

oduTimAct		0.5.1.1.28
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oduRxSapi		0.5.1.1.29
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduRxDapi		0.5.1.1.30
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oduRxOperator		0.5.1.1.31
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

oduDegradeInterval		0.5.1.1.32
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

oduDegradeThreshold		0.5.1.1.33
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

oduTestSignalType		0.5.1.1.34
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

oduTestSignalEnable		0.5.1.1.35
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

oduTerminationMode		0.5.1.1.36
Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	terminated(0), nonTerminated(1)

oduEncryption		0.6
OBJECT IDENTIFIER

oduEncryptionTable		23.1
Encryption function for the ODU channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OduEncryptionEntry

oduEncryptionEntry		23.1.1
Entry of oduEncryptionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OduEncryptionEntry

oduEncryptionEncryptionEnable		23.1.1.1
Setting AES-256 encryption on OTN default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), enabledNonRevertive(3)

oduEncryptionBlockCipherMode		23.1.1.2
Specifies the block cipher mode of operation. default value :CTR
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ctr(1), gcm(2)

oduEncryptionEncryptionInterval		23.1.1.3
The encryption key rotation interval (in minutes) UNITS:minutes default value :30
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	10..1440

oduEncryptionEncryptionTxStatus		23.1.1.4
The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonOtnEncryStatusEnum

oduEncryptionEncryptionRxStatus		23.1.1.5
The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonOtnEncryStatusEnum

oduEncryptionOduKeySyncSession		23.1.1.6
Indicate the associated session for the ODU channel to synchronize keys. default value :none
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonOtnKeySyncSession

oduEncryptionEncryptionTxChannelId		23.1.1.7
Specify channel identifier of the encrypted ODU, which shall be unique within the NE.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

oduEncryptionTimeToNextKey		23.1.1.8
The time left to rotate the ODU encryption key. UNITS:seconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

testSignalStatus		0.7
OBJECT IDENTIFIER

testSignalStatusTable		0.7.1
Test signal status on ODU
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TestSignalStatusEntry

testSignalStatusEntry		0.7.1.1
Entry of testSignalStatusTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TestSignalStatusEntry

testSignalStatusPrbsSync		0.7.1.1.1
The test result of PRBS Synchronization default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), inSync(1), outSync(2), errSync(3)

testSignalStatusTestTimeDuration		0.7.1.1.2
The time duration of signal test UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

testSignalStatusPrbsBitErrorCount		0.7.1.1.3
The counting of bit error by PRBS Synchronization
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesGauge64

eth40g		0.8
OBJECT IDENTIFIER

eth40gTable		0.8.1
Represents the 40GBE object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth40gEntry

eth40gEntry		0.8.1.1
Entry of eth40gTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth40gEntry

eth40gEthFecType		0.8.1.1.1
The FEC working type of etyn port. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth40gEthFecTypeState		0.8.1.1.2
The FEC working state of etyn port. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth40gTransmitInterpacketgap		0.8.1.1.3
Specifies the minimum transmit IPG value. default value :8
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	8..12

eth40gGfpPayloadFcs		0.8.1.1.4
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth40gMappingMode		0.8.1.1.5
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

eth40gAdminStatus		0.8.1.1.6
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth40gOperStatus		0.8.1.1.7
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth40gAvailStatus		0.8.1.1.8
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

eth40gAliasName		0.8.1.1.9
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

eth40gClientShutdown		0.8.1.1.10
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth40gClientShutdownHoldoffTimer		0.8.1.1.11
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

eth40gNearEndAls		0.8.1.1.12
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth40gAlsDegradeMode		0.8.1.1.13
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth40gLoopbackEnable		0.8.1.1.14
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth40gLoopbackType		0.8.1.1.15
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

eth40gTestSignalType		0.8.1.1.16
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

eth40gTestSignalEnable		0.8.1.1.17
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

eth40gServiceLabel		0.8.1.1.18
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

eth40gLldpStatusIf		0.8.1.1.19
Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), rxonly(2), disabled(4)

eth40gHoldoffSignal		0.8.1.1.20
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth100g		0.9
OBJECT IDENTIFIER

eth100gTable		0.9.1
Represents the 100GBE object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth100gEntry

eth100gEntry		0.9.1.1
Entry of eth100gTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth100gEntry

eth100gEthFecType		0.9.1.1.1
The FEC working type of etyn port. default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth100gEthFecTypeState		0.9.1.1.2
The FEC working state of etyn port. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthFec

eth100gTransmitInterpacketgap		0.9.1.1.3
Specifies the minimum transmit IPG value. default value :8
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	8..12

eth100gGfpPayloadFcs		0.9.1.1.4
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth100gMappingMode		0.9.1.1.5
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

eth100gAdminStatus		0.9.1.1.6
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth100gOperStatus		0.9.1.1.7
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

eth100gAvailStatus		0.9.1.1.8
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

eth100gAliasName		0.9.1.1.9
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

eth100gClientShutdown		0.9.1.1.10
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth100gClientShutdownHoldoffTimer		0.9.1.1.11
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

eth100gNearEndAls		0.9.1.1.12
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

eth100gAlsDegradeMode		0.9.1.1.13
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth100gLoopbackEnable		0.9.1.1.14
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

eth100gLoopbackType		0.9.1.1.15
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

eth100gTestSignalType		0.9.1.1.16
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

eth100gTestSignalEnable		0.9.1.1.17
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

eth100gServiceLabel		0.9.1.1.18
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

eth100gLldpStatusIf		0.9.1.1.19
Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), rxonly(2), disabled(4)

eth100gHoldoffSignal		0.9.1.1.20
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

otu4		0.10
OBJECT IDENTIFIER

otu4Table		5.1
Represents the otu4 object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu4Entry

otu4Entry		5.1.1
Entry of otu4Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu4Entry

otu4FecType		5.1.1.1
The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

otu4AdminStatus		5.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu4OperStatus		5.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu4AvailStatus		5.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otu4AliasName		5.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otu4ServiceLabel		5.1.1.6
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

otu4ExpSapi		5.1.1.7
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4ExpDapi		5.1.1.8
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4ExpOperator		5.1.1.9
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu4TxSapi		5.1.1.10
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4TxDapi		5.1.1.11
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4TxOperator		5.1.1.12
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu4TimDefectMode		5.1.1.13
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

otu4TimAct		5.1.1.14
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu4RxSapi		5.1.1.15
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4RxDapi		5.1.1.16
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu4RxOperator		5.1.1.17
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu4DegradeInterval		5.1.1.18
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

otu4DegradeThreshold		5.1.1.19
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

otu4LoopbackEnable		5.1.1.20
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu4LoopbackType		5.1.1.21
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

otu4ClientShutdown		5.1.1.22
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

otu4ClientShutdownHoldoffTimer		5.1.1.23
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

otu4HoldoffSignal		5.1.1.24
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

otu4NearEndAls		5.1.1.25
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

otu4AlsDegradeMode		5.1.1.26
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu2		0.11
OBJECT IDENTIFIER

otu2Table		37.1
Represents the otu2 object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu2Entry

otu2Entry		37.1.1
Entry of otu2Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu2Entry

otu2FecType		37.1.1.1
The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

otu2AdminStatus		37.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu2OperStatus		37.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu2AvailStatus		37.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otu2AliasName		37.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otu2ServiceLabel		37.1.1.6
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

otu2ExpSapi		37.1.1.7
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2ExpDapi		37.1.1.8
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2ExpOperator		37.1.1.9
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2TxSapi		37.1.1.10
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2TxDapi		37.1.1.11
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2TxOperator		37.1.1.12
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2TimDefectMode		37.1.1.13
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

otu2TimAct		37.1.1.14
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu2RxSapi		37.1.1.15
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2RxDapi		37.1.1.16
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2RxOperator		37.1.1.17
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2DegradeInterval		37.1.1.18
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

otu2DegradeThreshold		37.1.1.19
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

otu2LoopbackEnable		37.1.1.20
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu2LoopbackType		37.1.1.21
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

otu2e		0.12
OBJECT IDENTIFIER

otu2eTable		38.1
Represents the otu2e object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu2eEntry

otu2eEntry		38.1.1
Entry of otu2eTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu2eEntry

otu2eFecType		38.1.1.1
The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

otu2eAdminStatus		38.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu2eOperStatus		38.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otu2eAvailStatus		38.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otu2eAliasName		38.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otu2eServiceLabel		38.1.1.6
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

otu2eExpSapi		38.1.1.7
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eExpDapi		38.1.1.8
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eExpOperator		38.1.1.9
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2eTxSapi		38.1.1.10
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eTxDapi		38.1.1.11
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eTxOperator		38.1.1.12
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2eTimDefectMode		38.1.1.13
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

otu2eTimAct		38.1.1.14
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu2eRxSapi		38.1.1.15
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eRxDapi		38.1.1.16
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otu2eRxOperator		38.1.1.17
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otu2eDegradeInterval		38.1.1.18
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

otu2eDegradeThreshold		38.1.1.19
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

otu2eLoopbackEnable		38.1.1.20
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otu2eLoopbackType		38.1.1.21
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

fc8g		0.13
OBJECT IDENTIFIER

fc8gTable		34.1
Represents the FC8G object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Fc8gEntry

fc8gEntry		34.1.1
Entry of fc8gTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Fc8gEntry

fc8gMappingMode		34.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

fc8gAdminStatus		34.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

fc8gOperStatus		34.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

fc8gAvailStatus		34.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

fc8gAliasName		34.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

fc8gClientShutdown		34.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

fc8gClientShutdownHoldoffTimer		34.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

fc8gNearEndAls		34.1.1.8
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

fc8gAlsDegradeMode		34.1.1.9
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

fc8gLoopbackEnable		34.1.1.10
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

fc8gLoopbackType		34.1.1.11
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

fc8gTestSignalType		34.1.1.12
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

fc8gTestSignalEnable		34.1.1.13
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

fc8gServiceLabel		34.1.1.14
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

fc8gHoldoffSignal		34.1.1.15
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

fc16g		0.14
OBJECT IDENTIFIER

fc16gTable		35.1
Represents the FC16G object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Fc16gEntry

fc16gEntry		35.1.1
Entry of fc16gTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Fc16gEntry

fc16gMappingMode		35.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

fc16gAdminStatus		35.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

fc16gOperStatus		35.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

fc16gAvailStatus		35.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

fc16gAliasName		35.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

fc16gClientShutdown		35.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

fc16gClientShutdownHoldoffTimer		35.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

fc16gNearEndAls		35.1.1.8
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

fc16gAlsDegradeMode		35.1.1.9
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

fc16gLoopbackEnable		35.1.1.10
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

fc16gLoopbackType		35.1.1.11
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

fc16gTestSignalType		35.1.1.12
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

fc16gTestSignalEnable		35.1.1.13
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

fc16gServiceLabel		35.1.1.14
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

fc16gHoldoffSignal		35.1.1.15
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

oc192		0.15
OBJECT IDENTIFIER

oc192Table		39.1
Represents the OC192 object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Oc192Entry

oc192Entry		39.1.1
Entry of oc192Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Oc192Entry

oc192MappingMode		39.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

oc192AdminStatus		39.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oc192OperStatus		39.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oc192AvailStatus		39.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

oc192AliasName		39.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

oc192ClientShutdown		39.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

oc192ClientShutdownHoldoffTimer		39.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

oc192NearEndAls		39.1.1.8
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

oc192AlsDegradeMode		39.1.1.9
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oc192LoopbackEnable		39.1.1.10
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oc192LoopbackType		39.1.1.11
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

oc192TestSignalType		39.1.1.12
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

oc192TestSignalEnable		39.1.1.13
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

oc192ServiceLabel		39.1.1.14
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

oc192ExpTrc		39.1.1.15
The expected trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oc192TxTrc		39.1.1.16
The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oc192RxTrc		39.1.1.17
The received trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

oc192TimAct		39.1.1.18
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oc192TimMonitor		39.1.1.19
The enable switching of tim defect monitor mode default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oc192AisType		39.1.1.20
NULL default value :Generic-AIS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	genericAis(0), msAis(1), aisL(2)

oc192HoldoffSignal		39.1.1.21
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

stm64		0.16
OBJECT IDENTIFIER

stm64Table		40.1
Represents the STM64 object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Stm64Entry

stm64Entry		40.1.1
Entry of stm64Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Stm64Entry

stm64MappingMode		40.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

stm64AdminStatus		40.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

stm64OperStatus		40.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

stm64AvailStatus		40.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

stm64AliasName		40.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

stm64ClientShutdown		40.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

stm64ClientShutdownHoldoffTimer		40.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

stm64NearEndAls		40.1.1.8
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

stm64AlsDegradeMode		40.1.1.9
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

stm64LoopbackEnable		40.1.1.10
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

stm64LoopbackType		40.1.1.11
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

stm64TestSignalType		40.1.1.12
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

stm64TestSignalEnable		40.1.1.13
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

stm64ServiceLabel		40.1.1.14
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

stm64ExpTrc		40.1.1.15
The expected trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

stm64TxTrc		40.1.1.16
The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

stm64RxTrc		40.1.1.17
The received trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

stm64TimAct		40.1.1.18
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

stm64TimMonitor		40.1.1.19
The enable switching of tim defect monitor mode default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

stm64AisType		40.1.1.20
NULL default value :Generic-AIS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	genericAis(0), msAis(1), aisL(2)

stm64HoldoffSignal		40.1.1.21
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

otuc2		0.17
OBJECT IDENTIFIER

otuc2Table		6.1
Represents the otuc2 object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otuc2Entry

otuc2Entry		6.1.1
Entry of otuc2Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Otuc2Entry

otuc2FecType		6.1.1.1
The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

otuc2AdminStatus		6.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otuc2OperStatus		6.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otuc2AvailStatus		6.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otuc2AliasName		6.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otuc2ServiceLabel		6.1.1.6
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

otuc2ExpSapi		6.1.1.7
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2ExpDapi		6.1.1.8
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2ExpOperator		6.1.1.9
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc2TxSapi		6.1.1.10
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2TxDapi		6.1.1.11
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2TxOperator		6.1.1.12
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc2TimDefectMode		6.1.1.13
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

otuc2TimAct		6.1.1.14
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otuc2RxSapi		6.1.1.15
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2RxDapi		6.1.1.16
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc2RxOperator		6.1.1.17
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc2DegradeInterval		6.1.1.18
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

otuc2DegradeThreshold		6.1.1.19
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

otuc3		0.18
OBJECT IDENTIFIER

otuc3Table		7.1
Represents the otuc3 object
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otuc3Entry

otuc3Entry		7.1.1
Entry of otuc3Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Otuc3Entry

otuc3FecType		7.1.1.1
The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

otuc3AdminStatus		7.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otuc3OperStatus		7.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otuc3AvailStatus		7.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otuc3AliasName		7.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otuc3ServiceLabel		7.1.1.6
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

otuc3ExpSapi		7.1.1.7
The expected sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3ExpDapi		7.1.1.8
The expected dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3ExpOperator		7.1.1.9
The expected operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc3TxSapi		7.1.1.10
The transmitter sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3TxDapi		7.1.1.11
The transmitter dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3TxOperator		7.1.1.12
The transmitter operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc3TimDefectMode		7.1.1.13
The tim defect selection mode default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTimMode

otuc3TimAct		7.1.1.14
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

otuc3RxSapi		7.1.1.15
The received sapi(Source Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3RxDapi		7.1.1.16
The received dapi(Destination Access Point Identifier)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

otuc3RxOperator		7.1.1.17
The received operator TTI
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

otuc3DegradeInterval		7.1.1.18
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

otuc3DegradeThreshold		7.1.1.19
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..2590845

ochOs		0.19
OBJECT IDENTIFIER

ochOsTable		4.1
Represents the och-os MO
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OchOsEntry

ochOsEntry		4.1.1
Entry of ochOsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OchOsEntry

ochOsModulationFormat		4.1.1.1
Currently och-os modulation format
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), dpQpsk(1), dp16qam(2), dp8qam(3), nrz(6)

ochOsLineEncoding		4.1.1.2
Currently line-encoding mode
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nonDifferential(1), differential(2)

ochOsFrequency		4.1.1.3
The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFreq

ochOsActualFrequency		4.1.1.4
The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFreq

ochOsRxFrequency		4.1.1.5
The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFreq

ochOsActualRxFrequency		4.1.1.6
The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFreq

ochOsLaserEnable		4.1.1.7
The enable switching of output laser. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

ochOsRequiredTxOpticalPower		4.1.1.8
This is to support adjustable optical power of Line side. default value :1.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

ochOsActualTxOpticalPower		4.1.1.9
This is the actual transmitting optical power of Line side. default value :-99.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

ochOsFecType		4.1.1.10
The FEC type of och-os default value :SDFEC25
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOtukFec

ochOsRxAttenuation		4.1.1.11
This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

ochOsTxFilterRollOff		4.1.1.12
Transmitter filter roll off factor. default value :0.2
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsPreemphasis		4.1.1.13
Preemphasis of transmitted signal. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

ochOsPreemphasisValue		4.1.1.14
Preemphasis of transmitted signal. default value :1.0
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsAdminStatus		4.1.1.15
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ochOsOperStatus		4.1.1.16
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ochOsAvailStatus		4.1.1.17
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

ochOsAliasName		4.1.1.18
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ochOsLoopbackEnable		4.1.1.19
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

ochOsLoopbackType		4.1.1.20
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

ochOsServiceLabel		4.1.1.21
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

ochOsDGD		4.1.1.22
Value of Differential Group Delay UNITS:ps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ochOsCD		4.1.1.23
Value of Chromatic Dispersion UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

ochOsOSNR		4.1.1.24
Current value of OSNR. The result could be OSNR value with dB
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

ochOsQFactor		4.1.1.25
Current value of Q-factor
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

ochOsPreFecBer		4.1.1.26
Current value of PreFEC Bit Error Ratio. default value :-99.0
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsCdRangeLow		4.1.1.27
low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

ochOsCdRangeHigh		4.1.1.28
high value of chromatic dispersion search range. UNITS:ps/nm default value :45000
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

ochOsPropagateShutdown		4.1.1.29
When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

ochOsFastSopMode		4.1.1.31
Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSonet		0.30
OBJECT IDENTIFIER

wan10gSonetTable		0.30.1
Represents the 10GWAN_SONET object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Wan10gSonetEntry

wan10gSonetEntry		0.30.1.1
Entry of wan10gSonetTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Wan10gSonetEntry

wan10gSonetMappingMode		0.30.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

wan10gSonetAdminStatus		0.30.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

wan10gSonetOperStatus		0.30.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

wan10gSonetAvailStatus		0.30.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

wan10gSonetAliasName		0.30.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

wan10gSonetClientShutdown		0.30.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSonetClientShutdownHoldoffTimer		0.30.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

wan10gSonetHoldoffSignal		0.30.1.1.8
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSonetNearEndAls		0.30.1.1.9
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSonetAlsDegradeMode		0.30.1.1.10
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSonetLoopbackEnable		0.30.1.1.11
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSonetLoopbackType		0.30.1.1.12
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

wan10gSonetTestSignalType		0.30.1.1.13
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

wan10gSonetTestSignalEnable		0.30.1.1.14
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

wan10gSonetServiceLabel		0.30.1.1.15
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

wan10gSonetExpTrc		0.30.1.1.16
The expected trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSonetTxTrc		0.30.1.1.17
The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSonetRxTrc		0.30.1.1.18
The received trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSonetTimAct		0.30.1.1.19
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSonetTimMonitor		0.30.1.1.20
The enable switching of tim defect monitor mode default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSonetAisType		0.30.1.1.21
NULL default value :Generic-AIS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	genericAis(0), msAis(1), aisL(2)

wan10gSdh		0.31
OBJECT IDENTIFIER

wan10gSdhTable		0.31.1
Represents the 10GWAN_SDH object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Wan10gSdhEntry

wan10gSdhEntry		0.31.1.1
Entry of wan10gSdhTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Wan10gSdhEntry

wan10gSdhMappingMode		0.31.1.1.1
The mapping mode of client port packets into ODUk. default value :not-applicable
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), gmp(1), gfpF(2), t40gbmpOdu2e(3), preamble(4), bmpFixedstuff(5), bmp(6), amp(7)

wan10gSdhAdminStatus		0.31.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

wan10gSdhOperStatus		0.31.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

wan10gSdhAvailStatus		0.31.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

wan10gSdhAliasName		0.31.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

wan10gSdhClientShutdown		0.31.1.1.6
The switching of client-shutdown. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSdhClientShutdownHoldoffTimer		0.31.1.1.7
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1000

wan10gSdhHoldoffSignal		0.31.1.1.8
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSdhNearEndAls		0.31.1.1.9
The switching of near end ALS. default value :no
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesYesNo

wan10gSdhAlsDegradeMode		0.31.1.1.10
The switching of defect BERSD-ODU trig ALS default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSdhLoopbackEnable		0.31.1.1.11
The enable switching of loopback function. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSdhLoopbackType		0.31.1.1.12
The type mode of loopback function default value :none
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), terminal(1), facility(2)

wan10gSdhTestSignalType		0.31.1.1.13
The type mode of test signal. default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalType

wan10gSdhTestSignalEnable		0.31.1.1.14
The enable switching of test signal function default value :NONE
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTestSignalConfig

wan10gSdhServiceLabel		0.31.1.1.15
Path/service name of cross-connection related facility.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

wan10gSdhExpTrc		0.31.1.1.16
The expected trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSdhTxTrc		0.31.1.1.17
The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSdhRxTrc		0.31.1.1.18
The received trc(trail trace identification)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..15)

wan10gSdhTimAct		0.31.1.1.19
The enable switching of inserting AIS by tim function default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSdhTimMonitor		0.31.1.1.20
The enable switching of tim defect monitor mode default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

wan10gSdhAisType		0.31.1.1.21
NULL default value :Generic-AIS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	genericAis(0), msAis(1), aisL(2)

eth10gStatistics		0.32
OBJECT IDENTIFIER

eth10gStatisticsTable		0.32.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth10gStatisticsEntry

eth10gStatisticsEntry		0.32.1.1
Entry of eth10gStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth10gStatisticsEntry

eth10gStatisticsEntryLastClear		0.32.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

eth10gStatisticsEntryLossOfSignalSeconds		0.32.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryBitErrorFec		0.32.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryUncorrectedBlockErrorFec		0.32.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInSymbolErrors		0.32.1.1.5
the statistics Times counting for input signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInDropEvents		0.32.1.1.6
the statistics counting for input signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInOctets		0.32.1.1.7
the statistics counting for input signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets		0.32.1.1.8
the statistics counting for input signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInBroadcastPackets		0.32.1.1.9
the statistics counting for input broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInMulticastPackets		0.32.1.1.10
the statistics counting for input multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInCrcAlignErrors		0.32.1.1.11
the statistics counting for input CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInUndersizePackets		0.32.1.1.12
the statistics counting for input undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInOversizePackets		0.32.1.1.13
the statistics counting for input oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInFragments		0.32.1.1.14
the statistics counting for input fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInJabbers		0.32.1.1.15
the statistics counting for input jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets64octets		0.32.1.1.16
the statistics counting for input 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets65to127octets		0.32.1.1.17
the statistics counting for input 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets128to255octets		0.32.1.1.18
the statistics counting for input 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets256to511octets		0.32.1.1.19
the statistics counting for input 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets512to1023octets		0.32.1.1.20
the statistics counting for input 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryInPackets1024to1518octets		0.32.1.1.21
the statistics counting for input 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutSymbolErrors		0.32.1.1.22
the statistics Times counting for output signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutDropEvents		0.32.1.1.23
the statistics counting for output signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutOctets		0.32.1.1.24
the statistics counting for output signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets		0.32.1.1.25
the statistics counting for output signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutBroadcastPackets		0.32.1.1.26
the statistics counting for output broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutMulticastPackets		0.32.1.1.27
the statistics counting for output multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutCrcAlignErrors		0.32.1.1.28
the statistics counting for output CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutUndersizePackets		0.32.1.1.29
the statistics counting for output undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutOversizePackets		0.32.1.1.30
the statistics counting for output oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutFragments		0.32.1.1.31
the statistics counting for output fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutJabbers		0.32.1.1.32
the statistics counting for output jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets64octets		0.32.1.1.33
the statistics counting for output 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets65to127octets		0.32.1.1.34
the statistics counting for output 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets128to255octets		0.32.1.1.35
the statistics counting for output 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets256to511octets		0.32.1.1.36
the statistics counting for output 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets512to1023octets		0.32.1.1.37
the statistics counting for output 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth10gStatisticsEntryOutPackets1024to1518octets		0.32.1.1.38
the statistics counting for output 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduStatistics		0.33
OBJECT IDENTIFIER

oduStatisticsTable		0.33.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OduStatisticsEntry

oduStatisticsEntry		0.33.1.1
Entry of oduStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OduStatisticsEntry

oduStatisticsEntryLastClear		0.33.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

oduStatisticsEntryErroredBlocks		0.33.1.1.2
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduStatisticsEntryErroredSeconds		0.33.1.1.3
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduStatisticsEntrySeverelyErroredSeconds		0.33.1.1.4
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduStatisticsEntryUnavailableSeconds		0.33.1.1.5
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduStatisticsEntryEncryptionFailRx		0.33.1.1.6
Failed Encryption Frames of Receive side UNITS:frames
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatistics		0.34
OBJECT IDENTIFIER

eth40gStatisticsTable		0.34.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth40gStatisticsEntry

eth40gStatisticsEntry		0.34.1.1
Entry of eth40gStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth40gStatisticsEntry

eth40gStatisticsEntryLastClear		0.34.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

eth40gStatisticsEntryLossOfSignalSeconds		0.34.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryBitErrorFec		0.34.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryUncorrectedBlockErrorFec		0.34.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInSymbolErrors		0.34.1.1.5
the statistics Times counting for input signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInDropEvents		0.34.1.1.6
the statistics counting for input signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInOctets		0.34.1.1.7
the statistics counting for input signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets		0.34.1.1.8
the statistics counting for input signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInBroadcastPackets		0.34.1.1.9
the statistics counting for input broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInMulticastPackets		0.34.1.1.10
the statistics counting for input multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInCrcAlignErrors		0.34.1.1.11
the statistics counting for input CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInUndersizePackets		0.34.1.1.12
the statistics counting for input undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInOversizePackets		0.34.1.1.13
the statistics counting for input oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInFragments		0.34.1.1.14
the statistics counting for input fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInJabbers		0.34.1.1.15
the statistics counting for input jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets64octets		0.34.1.1.16
the statistics counting for input 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets65to127octets		0.34.1.1.17
the statistics counting for input 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets128to255octets		0.34.1.1.18
the statistics counting for input 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets256to511octets		0.34.1.1.19
the statistics counting for input 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets512to1023octets		0.34.1.1.20
the statistics counting for input 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryInPackets1024to1518octets		0.34.1.1.21
the statistics counting for input 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutSymbolErrors		0.34.1.1.22
the statistics Times counting for output signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutDropEvents		0.34.1.1.23
the statistics counting for output signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutOctets		0.34.1.1.24
the statistics counting for output signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets		0.34.1.1.25
the statistics counting for output signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutBroadcastPackets		0.34.1.1.26
the statistics counting for output broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutMulticastPackets		0.34.1.1.27
the statistics counting for output multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutCrcAlignErrors		0.34.1.1.28
the statistics counting for output CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutUndersizePackets		0.34.1.1.29
the statistics counting for output undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutOversizePackets		0.34.1.1.30
the statistics counting for output oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutFragments		0.34.1.1.31
the statistics counting for output fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutJabbers		0.34.1.1.32
the statistics counting for output jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets64octets		0.34.1.1.33
the statistics counting for output 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets65to127octets		0.34.1.1.34
the statistics counting for output 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets128to255octets		0.34.1.1.35
the statistics counting for output 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets256to511octets		0.34.1.1.36
the statistics counting for output 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets512to1023octets		0.34.1.1.37
the statistics counting for output 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth40gStatisticsEntryOutPackets1024to1518octets		0.34.1.1.38
the statistics counting for output 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatistics		0.35
OBJECT IDENTIFIER

eth100gStatisticsTable		0.35.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Eth100gStatisticsEntry

eth100gStatisticsEntry		0.35.1.1
Entry of eth100gStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Eth100gStatisticsEntry

eth100gStatisticsEntryLastClear		0.35.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

eth100gStatisticsEntryLossOfSignalSeconds		0.35.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryBitErrorFec		0.35.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryUncorrectedBlockErrorFec		0.35.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInSymbolErrors		0.35.1.1.5
the statistics Times counting for input signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInDropEvents		0.35.1.1.6
the statistics counting for input signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInOctets		0.35.1.1.7
the statistics counting for input signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets		0.35.1.1.8
the statistics counting for input signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInBroadcastPackets		0.35.1.1.9
the statistics counting for input broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInMulticastPackets		0.35.1.1.10
the statistics counting for input multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInCrcAlignErrors		0.35.1.1.11
the statistics counting for input CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInUndersizePackets		0.35.1.1.12
the statistics counting for input undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInOversizePackets		0.35.1.1.13
the statistics counting for input oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInFragments		0.35.1.1.14
the statistics counting for input fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInJabbers		0.35.1.1.15
the statistics counting for input jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets64octets		0.35.1.1.16
the statistics counting for input 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets65to127octets		0.35.1.1.17
the statistics counting for input 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets128to255octets		0.35.1.1.18
the statistics counting for input 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets256to511octets		0.35.1.1.19
the statistics counting for input 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets512to1023octets		0.35.1.1.20
the statistics counting for input 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryInPackets1024to1518octets		0.35.1.1.21
the statistics counting for input 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutSymbolErrors		0.35.1.1.22
the statistics Times counting for output signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutDropEvents		0.35.1.1.23
the statistics counting for output signal drop events UNITS:events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutOctets		0.35.1.1.24
the statistics counting for output signal octets UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets		0.35.1.1.25
the statistics counting for output signal packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutBroadcastPackets		0.35.1.1.26
the statistics counting for output broadcast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutMulticastPackets		0.35.1.1.27
the statistics counting for output multicast packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutCrcAlignErrors		0.35.1.1.28
the statistics counting for output CRC error packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutUndersizePackets		0.35.1.1.29
the statistics counting for output undersize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutOversizePackets		0.35.1.1.30
the statistics counting for output oversize packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutFragments		0.35.1.1.31
the statistics counting for output fragment packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutJabbers		0.35.1.1.32
the statistics counting for output jabber packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets64octets		0.35.1.1.33
the statistics counting for output 64 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets65to127octets		0.35.1.1.34
the statistics counting for output 65 to 127 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets128to255octets		0.35.1.1.35
the statistics counting for output 128 to 255 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets256to511octets		0.35.1.1.36
the statistics counting for output 256 to 511 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets512to1023octets		0.35.1.1.37
the statistics counting for output 512 to 1023 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

eth100gStatisticsEntryOutPackets1024to1518octets		0.35.1.1.38
the statistics counting for output 1024 to 1518 octets packets UNITS:packets
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4Statistics		0.36
OBJECT IDENTIFIER

otu4StatisticsTable		0.36.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu4StatisticsEntry

otu4StatisticsEntry		0.36.1.1
Entry of otu4StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu4StatisticsEntry

otu4StatisticsEntryLastClear		0.36.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otu4StatisticsEntryLossOfSignalSeconds		0.36.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntryBitErrorFec		0.36.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntryUncorrectedBlockErrorFec		0.36.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntryErroredBlocks		0.36.1.1.5
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntryErroredSeconds		0.36.1.1.6
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntrySeverelyErroredSeconds		0.36.1.1.7
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu4StatisticsEntryUnavailableSeconds		0.36.1.1.8
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2Statistics		0.37
OBJECT IDENTIFIER

otu2StatisticsTable		0.37.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu2StatisticsEntry

otu2StatisticsEntry		0.37.1.1
Entry of otu2StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu2StatisticsEntry

otu2StatisticsEntryLastClear		0.37.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otu2StatisticsEntryLossOfSignalSeconds		0.37.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntryBitErrorFec		0.37.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntryUncorrectedBlockErrorFec		0.37.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntryErroredBlocks		0.37.1.1.5
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntryErroredSeconds		0.37.1.1.6
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntrySeverelyErroredSeconds		0.37.1.1.7
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2StatisticsEntryUnavailableSeconds		0.37.1.1.8
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatistics		0.38
OBJECT IDENTIFIER

otu2eStatisticsTable		0.38.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otu2eStatisticsEntry

otu2eStatisticsEntry		0.38.1.1
Entry of otu2eStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otu2eStatisticsEntry

otu2eStatisticsEntryLastClear		0.38.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otu2eStatisticsEntryLossOfSignalSeconds		0.38.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntryBitErrorFec		0.38.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntryUncorrectedBlockErrorFec		0.38.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntryErroredBlocks		0.38.1.1.5
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntryErroredSeconds		0.38.1.1.6
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntrySeverelyErroredSeconds		0.38.1.1.7
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otu2eStatisticsEntryUnavailableSeconds		0.38.1.1.8
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192Statistics		0.39
OBJECT IDENTIFIER

oc192StatisticsTable		0.39.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Oc192StatisticsEntry

oc192StatisticsEntry		0.39.1.1
Entry of oc192StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Oc192StatisticsEntry

oc192StatisticsEntryLastClear		0.39.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

oc192StatisticsEntryLossOfSignalSeconds		0.39.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192StatisticsEntryInCodingViolation		0.39.1.1.3
the statistics bits counting for ingress coding violation UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192StatisticsEntryInErroredSeconds		0.39.1.1.4
the statistics seconds counting for RX errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192StatisticsEntryInSeverelyErroredSeconds		0.39.1.1.5
the statistics seconds counting for RX severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192StatisticsEntryInUnavailableSeconds		0.39.1.1.6
the statistics seconds counting for RX unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oc192StatisticsEntryInSeverelyErroredFrameSecond		0.39.1.1.7
the statistics seconds counting for ingress signal frame severely errored UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64Statistics		0.40
OBJECT IDENTIFIER

stm64StatisticsTable		0.40.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Stm64StatisticsEntry

stm64StatisticsEntry		0.40.1.1
Entry of stm64StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Stm64StatisticsEntry

stm64StatisticsEntryLastClear		0.40.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

stm64StatisticsEntryLossOfSignalSeconds		0.40.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64StatisticsEntryInBackgroundBlockError		0.40.1.1.3
the statistics counting for ingress errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64StatisticsEntryInErroredSeconds		0.40.1.1.4
the statistics seconds counting for RX errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64StatisticsEntryInSeverelyErroredSeconds		0.40.1.1.5
the statistics seconds counting for RX severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64StatisticsEntryInUnavailableSeconds		0.40.1.1.6
the statistics seconds counting for RX unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

stm64StatisticsEntryInOutOfFrameSeconds		0.40.1.1.7
the statistics seconds counting for ingress signal lose of frame UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatistics		0.41
OBJECT IDENTIFIER

wan10gSonetStatisticsTable		0.41.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Wan10gSonetStatisticsEntry

wan10gSonetStatisticsEntry		0.41.1.1
Entry of wan10gSonetStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Wan10gSonetStatisticsEntry

wan10gSonetStatisticsEntryLastClear		0.41.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

wan10gSonetStatisticsEntryLossOfSignalSeconds		0.41.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatisticsEntryInCodingViolation		0.41.1.1.3
the statistics bits counting for ingress coding violation UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatisticsEntryInErroredSeconds		0.41.1.1.4
the statistics seconds counting for RX errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatisticsEntryInSeverelyErroredSeconds		0.41.1.1.5
the statistics seconds counting for RX severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatisticsEntryInUnavailableSeconds		0.41.1.1.6
the statistics seconds counting for RX unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond		0.41.1.1.7
the statistics seconds counting for ingress signal frame severely errored UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatistics		0.42
OBJECT IDENTIFIER

wan10gSdhStatisticsTable		0.42.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Wan10gSdhStatisticsEntry

wan10gSdhStatisticsEntry		0.42.1.1
Entry of wan10gSdhStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Wan10gSdhStatisticsEntry

wan10gSdhStatisticsEntryLastClear		0.42.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

wan10gSdhStatisticsEntryLossOfSignalSeconds		0.42.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatisticsEntryInBackgroundBlockError		0.42.1.1.3
the statistics counting for ingress errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatisticsEntryInErroredSeconds		0.42.1.1.4
the statistics seconds counting for RX errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatisticsEntryInSeverelyErroredSeconds		0.42.1.1.5
the statistics seconds counting for RX severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatisticsEntryInUnavailableSeconds		0.42.1.1.6
the statistics seconds counting for RX unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

wan10gSdhStatisticsEntryInOutOfFrameSeconds		0.42.1.1.7
the statistics seconds counting for ingress signal lose of frame UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

fc8gStatistics		0.43
OBJECT IDENTIFIER

fc8gStatisticsTable		0.43.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Fc8gStatisticsEntry

fc8gStatisticsEntry		0.43.1.1
Entry of fc8gStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Fc8gStatisticsEntry

fc8gStatisticsEntryLastClear		0.43.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

fc8gStatisticsEntryLossOfSignalSeconds		0.43.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

fc8gStatisticsEntryInSymbolErrors		0.43.1.1.3
the statistics Times counting for signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

fc16gStatistics		0.44
OBJECT IDENTIFIER

fc16gStatisticsTable		0.44.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Fc16gStatisticsEntry

fc16gStatisticsEntry		0.44.1.1
Entry of fc16gStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Fc16gStatisticsEntry

fc16gStatisticsEntryLastClear		0.44.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

fc16gStatisticsEntryLossOfSignalSeconds		0.44.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

fc16gStatisticsEntryInSymbolErrors		0.44.1.1.3
the statistics Times counting for signal symbol errors UNITS:Events
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2Statistics		0.45
OBJECT IDENTIFIER

otuc2StatisticsTable		0.45.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otuc2StatisticsEntry

otuc2StatisticsEntry		0.45.1.1
Entry of otuc2StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otuc2StatisticsEntry

otuc2StatisticsEntryLastClear		0.45.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otuc2StatisticsEntryLossOfSignalSeconds		0.45.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntryBitErrorFec		0.45.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntryUncorrectedBlockErrorFec		0.45.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntryErroredBlocks		0.45.1.1.5
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntryErroredSeconds		0.45.1.1.6
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntrySeverelyErroredSeconds		0.45.1.1.7
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc2StatisticsEntryUnavailableSeconds		0.45.1.1.8
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3Statistics		0.46
OBJECT IDENTIFIER

otuc3StatisticsTable		0.46.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Otuc3StatisticsEntry

otuc3StatisticsEntry		0.46.1.1
Entry of otuc3StatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Otuc3StatisticsEntry

otuc3StatisticsEntryLastClear		0.46.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

otuc3StatisticsEntryLossOfSignalSeconds		0.46.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntryBitErrorFec		0.46.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntryUncorrectedBlockErrorFec		0.46.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntryErroredBlocks		0.46.1.1.5
the statistics counting for errored blocks UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntryErroredSeconds		0.46.1.1.6
the statistics seconds counting for errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntrySeverelyErroredSeconds		0.46.1.1.7
the statistics seconds counting for severely errored signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

otuc3StatisticsEntryUnavailableSeconds		0.46.1.1.8
the statistics seconds counting for unavailable signal UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsStatistics		0.47
OBJECT IDENTIFIER

ochOsStatisticsTable		0.47.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OchOsStatisticsEntry

ochOsStatisticsEntry		0.47.1.1
Entry of ochOsStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OchOsStatisticsEntry

ochOsStatisticsEntryLastClear		0.47.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

ochOsStatisticsEntryLossOfSignalSeconds		0.47.1.1.2
the statistics seconds counting for signal loss UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsStatisticsEntryBitErrorFec		0.47.1.1.3
the statistics bits counting for error bit forward error correction UNITS:bits
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ochOsStatisticsEntryUncorrectedBlockErrorFec		0.47.1.1.4
the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

cRS		1.3.6.1.4.1.42229.1.2.4.3
OBJECT IDENTIFIER

cRSTable		1.3.6.1.4.1.42229.1.2.4.3.1
Cross connection table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CRSEntry

cRSEntry		1.3.6.1.4.1.42229.1.2.4.3.1.1
Entry of cRSTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CRSEntry

cRSSrcTp		1.3.6.1.4.1.42229.1.2.4.3.1.1.1
Source tp of cross connection.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

cRSDstTp		1.3.6.1.4.1.42229.1.2.4.3.1.1.2
Destination tp of cross connection.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

cRSServiceLabel		1.3.6.1.4.1.42229.1.2.4.3.1.1.3
Path/service name of cross-connection.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

cRSManagedBy		1.3.6.1.4.1.42229.1.2.4.3.1.1.4
Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	system(1), user(2)

cRSAliasName		1.3.6.1.4.1.42229.1.2.4.3.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

fiberConnection		1.3.6.1.4.1.42229.1.2.4.4
OBJECT IDENTIFIER

fiberConnectionTable		1.3.6.1.4.1.42229.1.2.4.4.1
Fiber connection table which will be user managed and be explicitly provisioned by user. Fiber Connection indicates the physical fiber connection between physical ports or subports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FiberConnectionEntry

fiberConnectionEntry		1.3.6.1.4.1.42229.1.2.4.4.1.1
Entry of fiberConnectionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	FiberConnectionEntry

fiberConnectionSrcPort		1.3.6.1.4.1.42229.1.2.4.4.1.1.1
Source port of fiber connection.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

fiberConnectionDstPort		1.3.6.1.4.1.42229.1.2.4.4.1.1.2
Destination port of fiber connection.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

fiberConnectionType		1.3.6.1.4.1.42229.1.2.4.4.1.1.3
Indicates fiber connection type. default value :two-way
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	twoWay(1), oneWay(2)

fiberConnectionFiberLabel		1.3.6.1.4.1.42229.1.2.4.4.1.1.4
Label of fiber connection.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

fiberConnectionAliasName		1.3.6.1.4.1.42229.1.2.4.4.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

optical		1.3.6.1.4.1.42229.1.2.4.5
OBJECT IDENTIFIER

ots		2.2
OBJECT IDENTIFIER

otsTable		61.1
Represents the Optical Transmission Section (OTS) interface entity
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OtsEntry

otsEntry		61.1.1
Entry of otsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OtsEntry

otsName		61.1.1.1
The name is defined to uniquely identify the ots optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

otsAdminStatus		61.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otsOperStatus		61.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

otsAvailStatus		61.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

otsAliasName		61.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

otsSupportingRxPort		61.1.1.6
Supporting Rx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

otsSupportingTxPort		61.1.1.7
Supporting Tx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

otsMeasuredSpanLoss		61.1.1.8
The measured span loss excluding offset.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalDB

oms		2.3
OBJECT IDENTIFIER

omsTable		41.1
Represents the optical multiplex section (OMS) interface MO
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OmsEntry

omsEntry		41.1.1
Entry of omsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OmsEntry

omsName		41.1.1.1
The name is defined to uniquely identify the oms optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

omsAdminStatus		41.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

omsOperStatus		41.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

omsAvailStatus		41.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

omsAliasName		41.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

omsSupportingRxPort		41.1.1.6
Supporting Rx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

omsSupportingTxPort		41.1.1.7
Supporting Tx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

omsParentOtsInterface		41.1.1.8
Supporting OTS interface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

omsRxOpticalPower		41.1.1.9
Received optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

omsTxOpticalPower		41.1.1.10
Transmitted optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

osc		2.4
OBJECT IDENTIFIER

oscTable		60.1
Represents the Optical Supervision Channel (OSC) MO
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OscEntry

oscEntry		60.1.1
Entry of oscTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OscEntry

oscName		60.1.1.1
The name is defined to uniquely identify the osc optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

oscAdminStatus		60.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oscOperStatus		60.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

oscAvailStatus		60.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

oscAliasName		60.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

oscSupportingRxPort		60.1.1.6
Supporting Rx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

oscSupportingTxPort		60.1.1.7
Supporting Tx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

oscParentOtsInterface		60.1.1.8
Supporting OTS insterface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

oscMode		60.1.1.9
Indicating the current OSC mode. default value :155M52
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notApplicable(0), t155m52(1)

oscWavelength		60.1.1.10
Indicates the wavelength band of the OSC channel. UNITS:nm default value :1510
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oscDataCommunication		60.1.1.11
Configuration for enable or disable data communication network support of the OSC. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

oscRxOpticalPower		60.1.1.12
Received optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

oscTxOpticalPower		60.1.1.13
Transmitted optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

gopt		2.5
OBJECT IDENTIFIER

goptTable		42.1
Represents the Generic Optical Section Interface (GOPT) MO
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GoptEntry

goptEntry		42.1.1
Entry of goptTable
Status: current	Access: not-accessible
OBJECT-TYPE
	GoptEntry

goptName		42.1.1.1
The name is defined to uniquely identify the gopt optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesNameIdentifier

goptAdminStatus		42.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

goptOperStatus		42.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

goptAvailStatus		42.1.1.4
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

goptAliasName		42.1.1.5
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

goptSupportingRxPort		42.1.1.6
Supporting Rx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

goptSupportingTxPort		42.1.1.7
Supporting Tx port for the optical interface.
Status: current	Access: read-only
OBJECT-TYPE
	OpticalCommonSupportingPort

goptRxOpticalPower		42.1.1.8
Received optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

goptTxOpticalPower		42.1.1.9
Transmitted optical power
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

omsStatistics		2.9
OBJECT IDENTIFIER

omsStatisticsTable		2.9.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OmsStatisticsEntry

omsStatisticsEntry		2.9.1.1
Entry of omsStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OmsStatisticsEntry

omsStatisticsEntryLastClear		2.9.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

oscStatistics		2.10
OBJECT IDENTIFIER

oscStatisticsTable		2.10.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OscStatisticsEntry

oscStatisticsEntry		2.10.1.1
Entry of oscStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OscStatisticsEntry

oscStatisticsEntryLastClear		2.10.1.1.1
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

goptStatistics		2.11
OBJECT IDENTIFIER

goptStatisticsTable		2.11.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GoptStatisticsEntry

goptStatisticsEntry		2.11.1.1
Entry of goptStatisticsTable
Status: current	Access: not-accessible
OBJECT-TYPE
	GoptStatisticsEntry

goptStatisticsEntryProtectionSwitchDuration		2.11.1.1.1
Protection Switch Duration UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

goptStatisticsEntryProtectionSwitchCount		2.11.1.1.2
Protection Switch Count UNITS:times
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

goptStatisticsEntryLossTx		2.11.1.1.3
Loss of Signal Seconds of Transmit side UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

goptStatisticsEntryLossRx		2.11.1.1.4
Loss of Signal Seconds of Receive side UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

goptStatisticsEntryLastClear		2.11.1.1.5
The start time of statistics monitor default value :0000-00-00T00:00:00.000Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

lldp		1.3.6.1.4.1.42229.1.2.4.6
OBJECT IDENTIFIER

lldpStatusNe		1.3.6.1.4.1.42229.1.2.4.6.1
Global lldp control on NE level. Value of 'enabled', then the LLDP agent will receive, but it will not transmit LLDP frames on all ports with port level lldp not disabled of the NE. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on all ports of the NE. If there is remote systems information which is received on ports supporting LLDP and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

performance		1.3.6.1.4.1.42229.1.2.5
OBJECT IDENTIFIER

performanceInfo		1.3.6.1.4.1.42229.1.2.5.1
OBJECT IDENTIFIER

performancePmdaystart		1.3.6.1.4.1.42229.1.2.5.1.1
Specifies the hour of starting collecting 1-DAY monitoring parameters. To reset the NE clock to the default value of 00:00 hours, the parameter should contain the value 0. UNITS:hour default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..23

performanceStatisticsEnable		1.3.6.1.4.1.42229.1.2.5.1.2
The global switch for all system statistics data collection. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

pmPoint		1.3.6.1.4.1.42229.1.2.5.2
OBJECT IDENTIFIER

pmPointTable		1.3.6.1.4.1.42229.1.2.5.2.1
The list of performance monitoring points associated with the monitored management object.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PmPointEntry

pmPointEntry		1.3.6.1.4.1.42229.1.2.5.2.1.1
Entry of pmPointTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PmPointEntry

pmPointPmEntity		1.3.6.1.4.1.42229.1.2.5.2.1.1.1
Specifies the management object instance the performance monitoring data are collected for.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

pmPointPmpType		1.3.6.1.4.1.42229.1.2.5.2.1.1.2
Specifies the type of performance monitoring point.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantPmtypesPmpType

pmPointPmTimePeriod		1.3.6.1.4.1.42229.1.2.5.2.1.1.3
Specifies the time-period increments during which PM data are collected.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesManagementTimePeriod

pmPointSupervisionSwitch		1.3.6.1.4.1.42229.1.2.5.2.1.1.4
Enable/disable counting for all performance monitoring parameters of the given PMP. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

pmPointThresholdingSwitch		1.3.6.1.4.1.42229.1.2.5.2.1.1.5
Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

pmPointHistoryRecording		1.3.6.1.4.1.42229.1.2.5.2.1.1.6
Enable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

pmData		1.3.6.1.4.1.42229.1.2.5.3
OBJECT IDENTIFIER

pmDataCurrentTable		1.3.6.1.4.1.42229.1.2.5.3.2
Defines the get-pm output of record performance data for current time
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PmDataCurrentEntry

pmDataCurrentEntry		1.3.6.1.4.1.42229.1.2.5.3.2.1
Entry of pmDataCurrentTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PmDataCurrentEntry

pmDataCurrentMonitoringDateTime		1.3.6.1.4.1.42229.1.2.5.3.2.1.1
Monitoring data and time'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

pmDataCurrentPmParameter		1.3.6.1.4.1.42229.1.2.5.3.2.1.2
Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
Status: current	Access: not-accessible
OBJECT-TYPE
	CoriantPmtypesPmParameter

pmDataCurrentPmValue		1.3.6.1.4.1.42229.1.2.5.3.2.1.3
PM counter or gauge value of the PM parameter.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

pmDataCurrentPmUnit		1.3.6.1.4.1.42229.1.2.5.3.2.1.4
Unit of PM value.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmUnitOfValue

pmDataCurrentValidity		1.3.6.1.4.1.42229.1.2.5.3.2.1.5
Indicates whether or not a performance monitoring value is valid.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantPmtypesValidityType

pmDataLatestHistoryTable		1.3.6.1.4.1.42229.1.2.5.3.3
Defines the get-pm output of record performance data for latest history time
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PmDataLatestHistoryEntry

pmDataLatestHistoryEntry		1.3.6.1.4.1.42229.1.2.5.3.3.1
Entry of pmDataLatestHistoryTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PmDataLatestHistoryEntry

pmDataLatestHistoryMonitoringDateTime		1.3.6.1.4.1.42229.1.2.5.3.3.1.1
Monitoring data and time'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

pmDataLatestHistoryPmParameter		1.3.6.1.4.1.42229.1.2.5.3.3.1.2
Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
Status: current	Access: not-accessible
OBJECT-TYPE
	CoriantPmtypesPmParameter

pmDataLatestHistoryPmValue		1.3.6.1.4.1.42229.1.2.5.3.3.1.3
PM counter or gauge value of the PM parameter.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

pmDataLatestHistoryPmUnit		1.3.6.1.4.1.42229.1.2.5.3.3.1.4
Unit of PM value.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmUnitOfValue

pmDataLatestHistoryValidity		1.3.6.1.4.1.42229.1.2.5.3.3.1.5
Indicates whether or not a performance monitoring value is valid.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantPmtypesValidityType

pmDataHistoryTable		1.3.6.1.4.1.42229.1.2.5.3.4
Defines the get-pm output of record performance data for history
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PmDataHistoryEntry

pmDataHistoryEntry		1.3.6.1.4.1.42229.1.2.5.3.4.1
Entry of pmDataHistoryTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PmDataHistoryEntry

pmDataHistoryRecordIndex		1.3.6.1.4.1.42229.1.2.5.3.4.1.1
Index of PM data records.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

pmDataHistoryMonitoringDateTime		1.3.6.1.4.1.42229.1.2.5.3.4.1.2
Monitoring data and time'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

pmDataHistoryPmParameter		1.3.6.1.4.1.42229.1.2.5.3.4.1.3
Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
Status: current	Access: not-accessible
OBJECT-TYPE
	CoriantPmtypesPmParameter

pmDataHistoryPmValue		1.3.6.1.4.1.42229.1.2.5.3.4.1.4
PM counter or gauge value of the PM parameter.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

pmDataHistoryPmUnit		1.3.6.1.4.1.42229.1.2.5.3.4.1.5
Unit of PM value.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmUnitOfValue

pmDataHistoryValidity		1.3.6.1.4.1.42229.1.2.5.3.4.1.6
Indicates whether or not a performance monitoring value is valid.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantPmtypesValidityType

pmThresholdsValue		1.3.6.1.4.1.42229.1.2.5.4
OBJECT IDENTIFIER

pmThresholdsValueTable		1.3.6.1.4.1.42229.1.2.5.4.1
The list of entries of performance monitoring threshold value.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PmThresholdsValueEntry

pmThresholdsValueEntry		1.3.6.1.4.1.42229.1.2.5.4.1.1
Entry of pmThresholdsValueTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PmThresholdsValueEntry

pmThresholdsValuePmParameter		1.3.6.1.4.1.42229.1.2.5.4.1.1.1
Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantPmtypesPmParameter

pmThresholdsValuePmHighThreshold		1.3.6.1.4.1.42229.1.2.5.4.1.1.2
Specifies the desired high threshold value of the selected performance monitoring parameter.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmThresholdValue

pmThresholdsValuePmLowThreshold		1.3.6.1.4.1.42229.1.2.5.4.1.1.3
Specifies the desired low threshold value of the selected performance monitoring parameter.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmThresholdValue

pmThresholdsValuePmUnit		1.3.6.1.4.1.42229.1.2.5.4.1.1.4
The unit of the performance monitoring value.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantCommonpmUnitOfValue

networking		1.3.6.1.4.1.42229.1.2.6
OBJECT IDENTIFIER

networkingInfo		1.3.6.1.4.1.42229.1.2.6.1
OBJECT IDENTIFIER

networkingSourceAddressSelectMode		1.3.6.1.4.1.42229.1.2.6.1.1
Select the source address for route next-hop entry. loopback-prefer mode select the numerically lowest address configured on loopback interfaces if exist, link-prefer mode select the address configured on the outgoing interface default value :link-prefer
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	loopbackPrefer(1), linkPrefer(2)

interface		1.3.6.1.4.1.42229.1.2.6.2
OBJECT IDENTIFIER

interfaceTable		1.3.6.1.4.1.42229.1.2.6.2.1
The list of configured interfaces on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InterfaceEntry

interfaceEntry		1.3.6.1.4.1.42229.1.2.6.2.1.1
Entry of interfaceTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceEntry

interfaceIfName		1.3.6.1.4.1.42229.1.2.6.2.1.1.1
The name of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

interfaceIfDescription		1.3.6.1.4.1.42229.1.2.6.2.1.1.2
A textual description of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

interfaceIfType		1.3.6.1.4.1.42229.1.2.6.2.1.1.3
The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(0), ethernetcsmacd(1), ppp(2), softwareloopback(3), lapd(4), oscx(5)

interfaceAdminStatus		1.3.6.1.4.1.42229.1.2.6.2.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

interfaceOperStatus		1.3.6.1.4.1.42229.1.2.6.2.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

interfaceAvailStatus		1.3.6.1.4.1.42229.1.2.6.2.1.1.6
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	none(0), failed(1), mismatch(2), lowerLayerDown(3), notPresent(4), shutdown(5), degraded(6), idle(7), busy(8), hibernation(9), inTest(10), loopback(11), softwareUpgrade(12), initializing(13), unknown(14), incomplete(15), laserSafetyShutoff(16), measuring(17), firmwareLoading(18), connected(19)

interfaceAliasName		1.3.6.1.4.1.42229.1.2.6.2.1.1.7
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ethernet		1.3.6.1.4.1.42229.1.2.6.3
OBJECT IDENTIFIER

ethernetTable		1.3.6.1.4.1.42229.1.2.6.3.1
The Ethernet attributes of an Ethernet interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EthernetEntry

ethernetEntry		1.3.6.1.4.1.42229.1.2.6.3.1.1
Entry of ethernetTable
Status: current	Access: not-accessible
OBJECT-TYPE
	EthernetEntry

ethernetAutoNegotiation		1.3.6.1.4.1.42229.1.2.6.3.1.1.1
Auto negotiation mode. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

ethernetDuplexMode		1.3.6.1.4.1.42229.1.2.6.3.1.1.2
Duplex Mode; only valid if auto negotiation is disabled. default value :full
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDuplexMode

ethernetOperationalDuplexMode		1.3.6.1.4.1.42229.1.2.6.3.1.1.3
Operational duplex mode. default value :NA
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDuplexMode

ethernetRate		1.3.6.1.4.1.42229.1.2.6.3.1.1.4
Required Ethernet Rate; only valid if auto negotiation is disabled. default value :max-rate
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthernetRate

ethernetOperationalEthernetRate		1.3.6.1.4.1.42229.1.2.6.3.1.1.5
Operation ethernet rate. default value :NA
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEthernetRate

ethernetFlowControl		1.3.6.1.4.1.42229.1.2.6.3.1.1.6
Specifies the type of flow control to be supported. default value :tx-rx
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFlowControl

ethernetOperationalFlowControl		1.3.6.1.4.1.42229.1.2.6.3.1.1.7
Operational flow control. default value :NA
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesFlowControl

ethernetMacAddress		1.3.6.1.4.1.42229.1.2.6.3.1.1.8
MAC Address of the port. default value :00:00:00:00:00:00
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesMacAddress

ethernetAliasName		1.3.6.1.4.1.42229.1.2.6.3.1.1.9
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ppp		1.3.6.1.4.1.42229.1.2.6.4
OBJECT IDENTIFIER

pppTable		33.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PppEntry

pppEntry		33.1.1
Entry of pppTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PppEntry

pppType		33.1.1.1
Specifies the link type associated with the ppp.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	gcc0(1)

pppPfRef		33.1.1.2
Reference of the ppp profile.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

pppResourceRef		33.1.1.3
Reference of the lower layer resource associated with this interface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

pppAliasName		33.1.1.4
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ipv4		1.3.6.1.4.1.42229.1.2.6.5
OBJECT IDENTIFIER

ipv4Table		1.1
Parameters for the IPv4 address family.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ipv4Entry

ipv4Entry		1.1.1
Entry of ipv4Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Ipv4Entry

ipv4Forwarding		1.1.1.1
Controls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). default value :true
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ipv4Mtu		1.1.1.2
The size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. If this leaf is not configured, the operationally used MTU depends on the interface's type. UNITS:octets
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	68..65535

ipv4AddressAssignmentMethod		1.1.1.3
IPv4 address assignment method. default value :static
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dhcp(2)

ipAddress		1.3.6.1.4.1.42229.1.2.6.6
OBJECT IDENTIFIER

ipAddressTable		1.3.6.1.4.1.42229.1.2.6.6.1
The IPv4 address on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpAddressEntry

ipAddressEntry		1.3.6.1.4.1.42229.1.2.6.6.1.1
Entry of ipAddressTable
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddressEntry

ipAddressIp		1.3.6.1.4.1.42229.1.2.6.6.1.1.1
The IPv4 address on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

ipAddressOrigin		1.3.6.1.4.1.42229.1.2.6.6.1.1.2
The origin of this address. default value :static
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), static(2), dhcp(3), linkLayer(4), random(5)

ipAddressPrefixLength		1.3.6.1.4.1.42229.1.2.6.6.1.1.3
The length of the subnet prefix.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32

ipUnnumbered		1.3.6.1.4.1.42229.1.2.6.7
OBJECT IDENTIFIER

ipUnnumberedTable		1.3.6.1.4.1.42229.1.2.6.7.1
The IP unnumbered configurations.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpUnnumberedEntry

ipUnnumberedEntry		1.3.6.1.4.1.42229.1.2.6.7.1.1
Entry of ipUnnumberedTable
Status: current	Access: not-accessible
OBJECT-TYPE
	IpUnnumberedEntry

ipUnnumberedUnnumEnabled		1.3.6.1.4.1.42229.1.2.6.7.1.1.1
Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :false
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ipUnnumberedParentInterface		1.3.6.1.4.1.42229.1.2.6.7.1.1.2
Reference of the parent interface of the unnumbered interface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

routingProtocol		1.3.6.1.4.1.42229.1.2.6.9
OBJECT IDENTIFIER

routingProtocolTable		1.3.6.1.4.1.42229.1.2.6.9.1
Routing protocol instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RoutingProtocolEntry

routingProtocolEntry		1.3.6.1.4.1.42229.1.2.6.9.1.1
Entry of routingProtocolTable
Status: current	Access: not-accessible
OBJECT-TYPE
	RoutingProtocolEntry

routingProtocolRtpType		1.3.6.1.4.1.42229.1.2.6.9.1.1.1
The type of the routing protocol instance.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesRtpType

routingProtocolRtpName		1.3.6.1.4.1.42229.1.2.6.9.1.1.2
The name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

routingProtocolDescription		1.3.6.1.4.1.42229.1.2.6.9.1.1.3
Textual description of the routing protocol instance.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

staticRoute		1.3.6.1.4.1.42229.1.2.6.10
OBJECT IDENTIFIER

staticRouteTable		1.3.6.1.4.1.42229.1.2.6.10.1
A list of static routes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		StaticRouteEntry

staticRouteEntry		1.3.6.1.4.1.42229.1.2.6.10.1.1
Entry of staticRouteTable
Status: current	Access: not-accessible
OBJECT-TYPE
	StaticRouteEntry

staticRouteDestinationPrefix		1.3.6.1.4.1.42229.1.2.6.10.1.1.1
IPv4 destination prefix.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Prefix	Size(1..64)

staticRouteDescription		1.3.6.1.4.1.42229.1.2.6.10.1.1.2
Textual description of the static route.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

staticRouteAdvertised		1.3.6.1.4.1.42229.1.2.6.10.1.1.3
When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is configured as an ASBR. default value :false
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

nextHop		1.3.6.1.4.1.42229.1.2.6.11
OBJECT IDENTIFIER

nextHopTable		1.3.6.1.4.1.42229.1.2.6.11.1
Configuration of static next-hop.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NextHopEntry

nextHopEntry		1.3.6.1.4.1.42229.1.2.6.11.1.1
Entry of nextHopTable
Status: current	Access: not-accessible
OBJECT-TYPE
	NextHopEntry

nextHopIndex		1.3.6.1.4.1.42229.1.2.6.11.1.1.1
An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

nextHopOutgoingInterface		1.3.6.1.4.1.42229.1.2.6.11.1.1.2
Reference of the outgoing interface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

nextHopAddress		1.3.6.1.4.1.42229.1.2.6.11.1.1.3
IPv4 address of the next-hop.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

nextHopMetric		1.3.6.1.4.1.42229.1.2.6.11.1.1.4
metric of the next-hop. default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ospf		1.3.6.1.4.1.42229.1.2.6.12
OBJECT IDENTIFIER

ospfTable		1.3.6.1.4.1.42229.1.2.6.12.1
OSPF protocol.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OspfEntry

ospfEntry		1.3.6.1.4.1.42229.1.2.6.12.1.1
Entry of ospfTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OspfEntry

ospfRouterId		1.3.6.1.4.1.42229.1.2.6.12.1.1.1
OSPF Router ID.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDottedQuad

ospfDescription		1.3.6.1.4.1.42229.1.2.6.12.1.1.2
Textual description of the OSPF instance.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ospfAsbr		1.3.6.1.4.1.42229.1.2.6.12.1.1.3
OSPF Autonomous System Boundary Router. default value :true
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ospfAdminStatus		1.3.6.1.4.1.42229.1.2.6.12.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ospfOperStatus		1.3.6.1.4.1.42229.1.2.6.12.1.1.5
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ospfAliasName		1.3.6.1.4.1.42229.1.2.6.12.1.1.6
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ospfArea		1.3.6.1.4.1.42229.1.2.6.13
OBJECT IDENTIFIER

ospfAreaTable		1.3.6.1.4.1.42229.1.2.6.13.1
Configuration of ospf area.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OspfAreaEntry

ospfAreaEntry		1.3.6.1.4.1.42229.1.2.6.13.1.1
Entry of ospfAreaTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OspfAreaEntry

ospfAreaId		1.3.6.1.4.1.42229.1.2.6.13.1.1.1
OSPF Router Area ID.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDottedQuad	Size(1..64)

ospfAreaAdminStatus		1.3.6.1.4.1.42229.1.2.6.13.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ospfAreaOperStatus		1.3.6.1.4.1.42229.1.2.6.13.1.1.3
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ospfAreaAliasName		1.3.6.1.4.1.42229.1.2.6.13.1.1.4
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

ospfAreaType		1.3.6.1.4.1.42229.1.2.6.13.1.1.5
OSPF Router Area Type. default value :normal
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), stub(2)

ospfInterface		1.3.6.1.4.1.42229.1.2.6.14
OBJECT IDENTIFIER

ospfInterfaceTable		1.3.6.1.4.1.42229.1.2.6.14.1
Configuration of interface in an ospf area.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OspfInterfaceEntry

ospfInterfaceEntry		1.3.6.1.4.1.42229.1.2.6.14.1.1
Entry of ospfInterfaceTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OspfInterfaceEntry

ospfInterfaceOspfIfName		1.3.6.1.4.1.42229.1.2.6.14.1.1.1
Reference of the interface in OSPF area.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ospfInterfaceOspfLinkpf		1.3.6.1.4.1.42229.1.2.6.14.1.1.2
Reference of the ospf link profile associated with the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ospfInterfaceOspfCost		1.3.6.1.4.1.42229.1.2.6.14.1.1.3
OSPF link cost.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

ospfInterfaceOspfIfRouting		1.3.6.1.4.1.42229.1.2.6.14.1.1.4
Specifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this link. PASSIVE - This link is advertised, routing messages are not transported over this link. default value :active
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), passive(2)

ospfInterfaceOspfNetworkType		1.3.6.1.4.1.42229.1.2.6.14.1.1.5
OSPF Interface Network Types.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	broadcast(1), pointToPoint(2), pointToMultipoint(3)

ospfAdjacency		1.3.6.1.4.1.42229.1.2.6.15
OBJECT IDENTIFIER

ospfAdjacencyTable		1.3.6.1.4.1.42229.1.2.6.15.1
attributes of OSPF adjacency.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OspfAdjacencyEntry

ospfAdjacencyEntry		1.3.6.1.4.1.42229.1.2.6.15.1.1
Entry of ospfAdjacencyTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OspfAdjacencyEntry

ospfAdjacencyOspfNeighborAddress		1.3.6.1.4.1.42229.1.2.6.15.1.1.1
neighbor IP address of the OSPF adjacency.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address	Size(1..64)

ospfAdjacencyNeighborRouterId		1.3.6.1.4.1.42229.1.2.6.15.1.1.2
OSPF neighbor Router ID.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDottedQuad

ospfAdjacencyOspfAdjStatus		1.3.6.1.4.1.42229.1.2.6.15.1.1.3
OSPF adjacency status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	down(1), init(2), attempt(3), twoWay(4), exstart(5), exchange(6), loading(7), full(8)

rib		1.3.6.1.4.1.42229.1.2.6.16
OBJECT IDENTIFIER

ribTable		1.3.6.1.4.1.42229.1.2.6.16.1
Each entry represents a RIB identified by the 'name' key. All routes in a RIB MUST belong to the same address family. For each routing instance, an implementation SHOULD provide one system-controlled default RIB for each supported address family.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RibEntry

ribEntry		1.3.6.1.4.1.42229.1.2.6.16.1.1
Entry of ribTable
Status: current	Access: not-accessible
OBJECT-TYPE
	RibEntry

ribName		1.3.6.1.4.1.42229.1.2.6.16.1.1.1
The name of the RIB.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ribAddressFamily		1.3.6.1.4.1.42229.1.2.6.16.1.1.2
Address family.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ipv4(1), ipv4Unicast(2), ipv6(3)

ribDefaultRib		1.3.6.1.4.1.42229.1.2.6.16.1.1.3
This flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By default it also receives routes from all routing protocols. default value :true
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ribDescription		1.3.6.1.4.1.42229.1.2.6.16.1.1.4
Textual description of the RIB.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

route		1.3.6.1.4.1.42229.1.2.6.17
OBJECT IDENTIFIER

routeTable		1.3.6.1.4.1.42229.1.2.6.17.1
A list of static routes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RouteEntry

routeEntry		1.3.6.1.4.1.42229.1.2.6.17.1.1
Entry of routeTable
Status: current	Access: not-accessible
OBJECT-TYPE
	RouteEntry

routeSourceProtocol		1.3.6.1.4.1.42229.1.2.6.17.1.1.1
Type of the routing protocol from which the route originated.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSourceProtocol

routeDestinationPrefix		1.3.6.1.4.1.42229.1.2.6.17.1.1.2
IPv4 destination prefix.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Prefix	Size(1..64)

routeDescription		1.3.6.1.4.1.42229.1.2.6.17.1.1.3
Textual description of the route.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

routePreference		1.3.6.1.4.1.42229.1.2.6.17.1.1.4
This route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller value means a more preferred route.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

routeActive		1.3.6.1.4.1.42229.1.2.6.17.1.1.5
Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

profiles		1.3.6.1.4.1.42229.1.2.6.18
OBJECT IDENTIFIER

pppProfile		1.3.6.1.4.1.42229.1.2.6.18.1
OBJECT IDENTIFIER

pppProfileTable		1.3.6.1.4.1.42229.1.2.6.18.1.1
Profile for the point-to-point interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PppProfileEntry

pppProfileEntry		1.3.6.1.4.1.42229.1.2.6.18.1.1.1
Entry of pppProfileTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PppProfileEntry

pppProfilePppPfName		1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1
The name of the point-to-point protocol profile.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..63)

pppProfilePppFcsLength		1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2
Specifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	t16(16), t32(32)

pppProfilePppMru		1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3
Specifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	64..1500

pppProfilePppRestartTimer		1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4
Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10

pppProfilePppMaxFailure		1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5
Specifies the maximum failure value of the PPP protocol profile. default value :5
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	2..10

ospfLinkProfile		1.3.6.1.4.1.42229.1.2.6.18.2
OBJECT IDENTIFIER

ospfLinkProfileTable		1.3.6.1.4.1.42229.1.2.6.18.2.1
Profile for the OSPF protocol link.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OspfLinkProfileEntry

ospfLinkProfileEntry		1.3.6.1.4.1.42229.1.2.6.18.2.1.1
Entry of ospfLinkProfileTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OspfLinkProfileEntry

ospfLinkProfileOspfLinkpfName		1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1
The name of the OSPF protocol link profile.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

ospfLinkProfileHelloInterval		1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2
Specifies the Hello Interval in seconds. UNITS:seconds default value :10
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

ospfLinkProfileRouterDeadInterval		1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3
Specifies the Router Dead Interval in seconds. UNITS:seconds default value :40
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	4..1024

ospfLinkProfileRetransmissionInterval		1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4
Specifies the Retransmission Interval in seconds. UNITS:seconds default value :5
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

oscx		1.3.6.1.4.1.42229.1.2.6.19
OBJECT IDENTIFIER

oscxTable		5.1
OSCX (Optical Supervisory Channel Extended) interface
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OscxEntry

oscxEntry		5.1.1
Entry of oscxTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OscxEntry

oscxChannel		5.1.1.1
Specifies the OSCX channel within the Optical Supervisory Channel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	t1(1), t2(2)

oscxResourceRef		5.1.1.2
Reference of the lower layer resource associated with this interface.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

oscxAliasName		5.1.1.3
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

security		1.3.6.1.4.1.42229.1.2.7
OBJECT IDENTIFIER

securityInfo		26.1
OBJECT IDENTIFIER

securitySshPublicKey		26.1.1
The system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..2500)

securitySshPublicKeyFingerprint		26.1.2
The fingerprint of the system's public key.This is a leaf list, encode by some leafs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

securityPreLoginMessage		26.1.3
Welcome message displayed before user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *********************************************************************************************
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1440)

securityWarningMessage		26.1.4
Welcome message displayed after user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *********************************************************************************************
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1440)

securityAaaAuthenticationMethod		26.1.5
specify authentication method for the user login to the NE. default value :local-only
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	localOnly(1), localFirstThenRemote(3), remoteFirstThenLocal(4), remoteUnavailableThenLocal(5)

securitySystemFips		26.1.6
specifies whether the system security is operating in compliance with FIPS. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

securityHttpSupport		26.1.7
Defines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

user		26.2
OBJECT IDENTIFIER

userTable		31.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		UserEntry

userEntry		31.1.1
Entry of userTable
Status: current	Access: not-accessible
OBJECT-TYPE
	UserEntry

userName		31.1.1.1
User name.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesUserName

userPassword		31.1.1.2
The password of the user.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8..32)

userClass		31.1.1.3
The access class for the user. default value :supervision
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cryptoOfficer(0), administration(1), configuration(2), operation(3), supervision(4)

userMaxInvalidLogin		31.1.1.4
This attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). default value :3
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..9

userSuspensionTime		31.1.1.5
This attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. UNITS:seconds default value :60
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..300

userTimeout		31.1.1.6
This attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables this attribute (meaning the session will not time out). UNITS:minutes default value :30
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..300

userPasswordAgingInterval		31.1.1.7
This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. UNITS:days default value :0
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..365

userPasswordExpirationDate		31.1.1.8
This attribute shows the password expiration date.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

userAdminStatus		31.1.1.9
The attribute allows administrators to modify the user administration status. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

userStatus		31.1.1.10
This attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. User with status 'password-aged' will have access to the system but will be forced to change his password on first-time login. User with status 'lockout' means the account is locked out due to unsuccessful login attempts. default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), passwordAged(3), lockout(4)

userMaxSessions		31.1.1.11
This attribute specifies the maximum number of sessions allowed for this user. default value :6
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..20

userLastLoginDate		31.1.1.12
The last login date/time of the user. default value :1970-01-01T00:00:00Z
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

userAaaType		31.1.1.13
Indicates the authentication method of the user. default value :local
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), remote(2)

session		26.3
OBJECT IDENTIFIER

sessionTable		26.3.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SessionEntry

sessionEntry		26.3.1.1
Entry of sessionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SessionEntry

sessionId		26.3.1.1.1
Specifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session is initiated from the serial port, the value is 'NA'.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSessionId

sessionUser		26.3.1.1.2
Points to a user instance.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

sessionType		26.3.1.1.3
Session type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cli(1), snmp(2), netconf(3), restconf(4), webgui(5), gnmi(6)

sessionProtocol		26.3.1.1.4
Indicates which protocol has been used to establish the session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	telnet(1), telnetRaw(2), serial(3), ssh(4), sshRaw(5), https(6), http(7)

sessionCreatedTime		26.3.1.1.5
The timestamp the user has created this session.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

aaaServer		26.4
OBJECT IDENTIFIER

aaaServerTable		26.4.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AaaServerEntry

aaaServerEntry		26.4.1.1
Entry of aaaServerTable
Status: current	Access: not-accessible
OBJECT-TYPE
	AaaServerEntry

aaaServerServerName		26.4.1.1.1
specify the name of aaa server.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

aaaServerServerPriority		26.4.1.1.2
This is used to sort the servers in the order of precedence.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10

aaaServerProtocolSupported		26.4.1.1.3
specify the protocol used for AAA. default value :TACACSPLUS
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tacacsplus(1)

aaaServerServerIp		26.4.1.1.4
The IPv4 address of AAA server.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

aaaServerServerPort		26.4.1.1.5
AAA server port number. default value :49
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesPortNumber

aaaServerSharedSecret		26.4.1.1.6
The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..100)

aaaServerRoleSupported		26.4.1.1.7
specify the role of the server for AAA. default value :authentication authorization
Status: current	Access: read-only
OBJECT-TYPE
	BITS	authentication(0), authorization(1), accounting(2)

aaaServerAdminStatus		26.4.1.1.8
The administrative state specifes the permission to use or prohibition against using the resource. The administrative state can be modified by the user. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

aaaServerTimeOut		26.4.1.1.9
Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..60

aaaServerRetry		26.4.1.1.10
Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10

keySyncSession		26.5
OBJECT IDENTIFIER

keySyncSessionTable		26.5.1
TLS session to synchronize ODU encryption key.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		KeySyncSessionEntry

keySyncSessionEntry		26.5.1.1
Entry of keySyncSessionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	KeySyncSessionEntry

keySyncSessionId		26.5.1.1.1
Specifies a unique identifier of the key synchronization session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

keySyncSessionAdminStatus		26.5.1.1.2
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

keySyncSessionSessionStatus		26.5.1.1.4
Indicating the status of key sync session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), disabled(1), connecting(2), incomplete(3), connected(4), unreachable(5), failedAuth(6), failed(7)

keySyncSessionRemoteIp		26.5.1.1.5
The IP address of remote session server.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

keySyncSessionRemotePort		26.5.1.1.6
The port number of remote session server. default value :8443
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesPortNumber

keySyncSessionLocalIp		26.5.1.1.7
The source IP address of a manual session.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

keySyncSessionLocalPort		26.5.1.1.8
The source port number of a manual session.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesPortNumber

keySyncSessionSourceAddressFrom		26.5.1.1.9
specifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :auto
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

keySyncSessionConnectedTime		26.5.1.1.10
The timestamp the user has created this session.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

keySyncSessionType		26.5.1.1.11
Indicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default value :manual
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	auto(1), manual(2)

keySyncSessionAuthType		26.5.1.1.12
Indicating the authentication type of the key sync session. default value :proprietary-psk
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tlsCertificate(1), proprietaryPsk(2)

keySyncSessionLocalCertificate		26.5.1.1.13
Previously installed certificate that authenticates the NE. default value :none
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

pskMap		26.7
OBJECT IDENTIFIER

pskMapTable		26.7.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PskMapEntry

pskMapEntry		26.7.1.1
Entry of pskMapTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PskMapEntry

pskMapPskIdentity		26.7.1.1.1
The PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

pskMapKey		26.7.1.1.2
The key associated with the PSK identity
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesHexString

pskMapPskStatus		26.7.1.1.4
Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map updating cannot be cancelled if psk-status is candidate-key-authenticate. default value :init
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(1), sync(2), fail(3), authenticate(4)

pskMapPskInfo		26.7.1.1.5
The label of the psk-map. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

pskMapWarningTimer		26.7.1.1.6
Warning Time before psk-map updating completes. UNITS:minutes default value :5
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..240

pskMapCriticalTimer		26.7.1.1.7
Critical time before psk-map updating completes. UNITS:minutes default value :30
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..480

pskMapTrafficOffTimer		26.7.1.1.8
Traffic off time before psk-map updating completes. UNITS:minutes default value :1440
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..1440

pskMapEffectiveTimestamp		26.7.1.1.9
Indicates the Time of new psk starts to take effect.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

key		26.9
OBJECT IDENTIFIER

keyTable		26.9.1
A key maintained by the keystore.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		KeyEntry

keyEntry		26.9.1.1
Entry of keyTable
Status: current	Access: not-accessible
OBJECT-TYPE
	KeyEntry

keyName		26.9.1.1.1
An arbitrary name for the key.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

keyAlgorithmIdentifier		26.9.1.1.2
Identifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rsa1024(1), rsa2048(2), rsa3072(3), rsa4096(4), rsa7680(5), rsa15360(6), secp192r1(7), secp256r1(8), secp384r1(9), secp521r1(10)

keyPublicKey		26.9.1.1.3
A binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, a DSA key is an INTEGER, an RSA key is represented as RSAPublicKey as defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key is represented using the 'publicKey' described in [RFC5915]
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..2500)

certificate		26.10
OBJECT IDENTIFIER

certificateTable		26.10.1
A certificate for this private key.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CertificateEntry

certificateEntry		26.10.1.1
Entry of certificateTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CertificateEntry

certificateName		26.10.1.1.1
An arbitrary name for the certificate. The name must be a unique across all keys, not just within this key.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

certificateVersion		26.10.1.1.2
version of the certificate. default value :x509v1
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	x509v1(1), x509v2(2), x509v3(3)

certificateSerialNumber		26.10.1.1.3
serial number of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

certificateSignatureAlgorithm		26.10.1.1.4
signature algorithm of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

certificateIssuer		26.10.1.1.5
issuer of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

certificateValidFrom		26.10.1.1.6
valid-from date and time of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

certificateValidTo		26.10.1.1.7
valid-to date and time of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

certificateSubject		26.10.1.1.8
subject of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

certificatePublicKeyAlgorithm		26.10.1.1.9
public-key-algorithm of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

trustedCertificateGroup		26.11
OBJECT IDENTIFIER

trustedCertificateGroupTable		26.11.1
A list of trusted certificates. These certificates can be used by a server to authenticate clients, or by clients to authenticate servers. The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once. Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules. For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrustedCertificateGroupEntry

trustedCertificateGroupEntry		26.11.1.1
Entry of trustedCertificateGroupTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TrustedCertificateGroupEntry

trustedCertificateGroupName		26.11.1.1.1
An arbitrary name for this list of trusted certificates.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

trustedCertificate		26.12
OBJECT IDENTIFIER

trustedCertificateTable		26.12.1
A trusted certificate for a specific use. Note, this 'certificate' is a list in order to encode any associated intermediate certificates.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrustedCertificateEntry

trustedCertificateEntry		26.12.1.1
Entry of trustedCertificateTable
Status: current	Access: not-accessible
OBJECT-TYPE
	TrustedCertificateEntry

trustedCertificateName		26.12.1.1.1
An arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

trustedCertificateVersion		26.12.1.1.2
version of the certificate. default value :x509v1
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	x509v1(1), x509v2(2), x509v3(3)

trustedCertificateSerialNumber		26.12.1.1.3
serial number of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

trustedCertificateSignatureAlgorithm		26.12.1.1.4
signature algorithm of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

trustedCertificateIssuer		26.12.1.1.5
issuer of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

trustedCertificateValidFrom		26.12.1.1.6
valid-from date and time of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

trustedCertificateValidTo		26.12.1.1.7
valid-to date and time of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

trustedCertificateSubject		26.12.1.1.8
subject of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

trustedCertificatePublicKeyAlgorithm		26.12.1.1.9
public-key-algorithm of the certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

nbi		1.3.6.1.4.1.42229.1.2.8
OBJECT IDENTIFIER

snmp		1.3.6.1.4.1.42229.1.2.8.1
OBJECT IDENTIFIER

snmpv3		2.1
OBJECT IDENTIFIER

snmpv3Table		2.1.1
SNMPv3 configuration for user
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Snmpv3Entry

snmpv3Entry		2.1.1.1
Entry of snmpv3Table
Status: current	Access: not-accessible
OBJECT-TYPE
	Snmpv3Entry

snmpv3UserSecLevel		2.1.1.1.1
Specifies the SNMPv3 user security level. default value :no-auth-no-priv
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	authPriv(1), authNoPriv(2), noAuthNoPriv(3)

snmpv3AuthProtocol		2.1.1.1.2
Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') default value :SHA
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	md5(1), sha(2)

snmpv3AuthPassphrase		2.1.1.1.3
Specifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0|8..64)

snmpv3PrivProtocol		2.1.1.1.4
Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	des(1), aes(2)

snmpv3PrivPassphrase		2.1.1.1.5
Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv'
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0|8..64)

snmpInfo		2.2
OBJECT IDENTIFIER

snmpEngineId		2.2.1
snmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of the MAC addresses Pool of the NE.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

snmpCommunity		2.3
OBJECT IDENTIFIER

snmpCommunityTable		2.3.1
List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnmpCommunityEntry

snmpCommunityEntry		2.3.1.1
Entry of snmpCommunityTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpCommunityEntry

snmpCommunityCommunityString		2.3.1.1.1
Community String.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSnmpString

snmpCommunityCommunityStringAccess		2.3.1.1.2
snmp access right of this community string. default value :read-only
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	readOnly(1)

snmpTarget		2.4
OBJECT IDENTIFIER

snmpTargetTable		2.4.1
List of SNMP targets (trap listeners)
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnmpTargetEntry

snmpTargetEntry		2.4.1.1
Entry of snmpTargetTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpTargetEntry

snmpTargetSnmpVersion		2.4.1.1.1
snmp version. default value :v2c
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	v2c(2), v3(3)

snmpTargetSnmpv3User		2.4.1.1.2
Indicate the snmpv3 user. Conditions:../snmp-version = 'v3'
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

snmpTargetTargetName		2.4.1.1.3
Identifies the SNMP target
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..32)

snmpTargetTargetIp		2.4.1.1.4
IP address of the SNMP target
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

snmpTargetTargetPort		2.4.1.1.5
UDP port number. default value :162
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesPortNumber

snmpTargetTargetTransport		2.4.1.1.6
Type of transport for the SNMP target default value :udp
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	udp(1)

snmpTargetTrapCommunityString		2.4.1.1.7
Community string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groove
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesSnmpString

cli		1.3.6.1.4.1.42229.1.2.8.2
OBJECT IDENTIFIER

cliConfig		1.1
OBJECT IDENTIFIER

cliConfigTable		1.1.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CliConfigEntry

cliConfigEntry		1.1.1.1
Entry of cliConfigTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CliConfigEntry

cliConfigCliLines		1.1.1.1.1
Number of rows to be used for display. This value is automatically discovered when possible default value :40
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	10..1000

cliConfigCliColumns		1.1.1.1.2
Number of columns to be used for display. This value is automatically discovered when possible default value :140
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	80..4000

cliConfigMaxHistorySize		1.1.1.1.3
Command history maximum size for the current session default value :500
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cliConfigInteractiveMode		1.1.1.1.4
This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled = CLI will prompt user (default) Disabled = CLI will suppress any prompt to the user This parameter is set per CLI session and is not persistent. default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

restconf		1.3.6.1.4.1.42229.1.2.8.3
OBJECT IDENTIFIER

restconfRestHttpSupport		4.1
Defines if the HTTP port (8080) is enabled for RESTCONF default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

restconfRestHttpsSupport		4.2
Defines if the HTTPS port (8181) is enabled for RESTCONF default value :enabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

restconfRestSessionTimeout		4.3
Timeout of a cookie based RESTCONF session. The cookie expiration date is reset every time there is activity on the session. UNITS:minutes default value :5
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..300

cliAlias		1.3.6.1.4.1.42229.1.2.8.4
OBJECT IDENTIFIER

cliAliasTable		1.3.6.1.4.1.42229.1.2.8.4.1
List of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CliAliasEntry

cliAliasEntry		1.3.6.1.4.1.42229.1.2.8.4.1.1
Entry of cliAliasTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CliAliasEntry

cliAliasName		1.3.6.1.4.1.42229.1.2.8.4.1.1.1
Name of the alias
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..256)

cliAliasValue		1.3.6.1.4.1.42229.1.2.8.4.1.1.2
Value of the alias
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..1024)

cliScript		1.3.6.1.4.1.42229.1.2.8.5
OBJECT IDENTIFIER

cliScriptTable		1.3.6.1.4.1.42229.1.2.8.5.1
List of available CLI scripts. Scripts can be executed with the 'run' command
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CliScriptEntry

cliScriptEntry		1.3.6.1.4.1.42229.1.2.8.5.1.1
Entry of cliScriptTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CliScriptEntry

cliScriptScriptName		1.3.6.1.4.1.42229.1.2.8.5.1.1.1
File name of the CLI script
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

cliScriptDescription		1.3.6.1.4.1.42229.1.2.8.5.1.1.2
Description of the CLI script
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

filesw		1.3.6.1.4.1.42229.1.2.9
OBJECT IDENTIFIER

softwareload		1.3.6.1.4.1.42229.1.2.9.2
OBJECT IDENTIFIER

softwareloadTable		1.3.6.1.4.1.42229.1.2.9.2.1
The list of the software loads in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SoftwareloadEntry

softwareloadEntry		1.3.6.1.4.1.42229.1.2.9.2.1.1
Entry of softwareloadTable
Status: current	Access: not-accessible
OBJECT-TYPE
	SoftwareloadEntry

softwareloadSwloadId		1.3.6.1.4.1.42229.1.2.9.2.1.1.1
software load identifier which is uniquely identify specific software load.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10

softwareloadSwloadState		1.3.6.1.4.1.42229.1.2.9.2.1.1.2
Indicates the state of the software load.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

softwareloadSwloadVersion		1.3.6.1.4.1.42229.1.2.9.2.1.1.3
Indicates the software version of the software load.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwVersion

softwareloadSwloadVendor		1.3.6.1.4.1.42229.1.2.9.2.1.1.4
Vendor information of the software load.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwloadVendor

softwareloadSwloadProduct		1.3.6.1.4.1.42229.1.2.9.2.1.1.5
Indicates the network element family this software belongs to.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwloadProduct

softwareloadSwloadLabel		1.3.6.1.4.1.42229.1.2.9.2.1.1.6
The label of the software load including summary information.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

database		1.3.6.1.4.1.42229.1.2.9.3
OBJECT IDENTIFIER

databaseTable		1.3.6.1.4.1.42229.1.2.9.3.1
The list of the databases in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DatabaseEntry

databaseEntry		1.3.6.1.4.1.42229.1.2.9.3.1.1
Entry of databaseTable
Status: current	Access: not-accessible
OBJECT-TYPE
	DatabaseEntry

databaseId		1.3.6.1.4.1.42229.1.2.9.3.1.1.1
database identifier which is uniquely identify specific database.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..10

databaseState		1.3.6.1.4.1.42229.1.2.9.3.1.1.2
Indicates the state of the database.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

databaseVersion		1.3.6.1.4.1.42229.1.2.9.3.1.1.3
Indicates the database version.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwVersion

databaseVendor		1.3.6.1.4.1.42229.1.2.9.3.1.1.4
Vendor information of the database.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwloadVendor

databaseProduct		1.3.6.1.4.1.42229.1.2.9.3.1.1.5
Indicates the network element family this database belongs to.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesSwloadProduct

databaseBackupTime		1.3.6.1.4.1.42229.1.2.9.3.1.1.6
Indicates the database last backup time. default value :
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

fwVersionMap		1.3.6.1.4.1.42229.1.2.9.4
OBJECT IDENTIFIER

fwVersionMapTable		1.3.6.1.4.1.42229.1.2.9.4.1
The firmware information of the upgradable devices included in the software load.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FwVersionMapEntry

fwVersionMapEntry		1.3.6.1.4.1.42229.1.2.9.4.1.1
Entry of fwVersionMapTable
Status: current	Access: not-accessible
OBJECT-TYPE
	FwVersionMapEntry

fwVersionMapDeviceName		1.3.6.1.4.1.42229.1.2.9.4.1.1.1
Indicates the name of the device.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesDeviceName

fwVersionMapDeviceFwVersion		1.3.6.1.4.1.42229.1.2.9.4.1.1.2
Indicates the version of the firmware.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesDeviceFwVersion

currentFwVersion		1.3.6.1.4.1.42229.1.2.9.5
OBJECT IDENTIFIER

currentFwVersionTable		1.3.6.1.4.1.42229.1.2.9.5.1
The firmware information of the upgradable devices included in the software load.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CurrentFwVersionEntry

currentFwVersionEntry		1.3.6.1.4.1.42229.1.2.9.5.1.1
Entry of currentFwVersionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	CurrentFwVersionEntry

currentFwVersionEquipmentEntity		1.3.6.1.4.1.42229.1.2.9.5.1.1.1
Indicates the entity of the equipment carrying the device.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

currentFwVersionFwEquipmentType		1.3.6.1.4.1.42229.1.2.9.5.1.1.2
Indicates the type of the equipment carrying the device.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEquipmentType

currentFwVersionDeviceName		1.3.6.1.4.1.42229.1.2.9.5.1.1.3
Indicates the name of the device.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesDeviceName

currentFwVersionDeviceFwVersion		1.3.6.1.4.1.42229.1.2.9.5.1.1.4
Indicates the version of the firmware.
Status: current	Access: read-only
OBJECT-TYPE
	CoriantFileSwTypesDeviceFwVersion

currentFwVersionFwState		1.3.6.1.4.1.42229.1.2.9.5.1.1.5
Indicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmware is not the version of current software load. default value :not-available
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), current(1), notCurrent(2)

rollbackPoint		1.3.6.1.4.1.42229.1.2.9.6
OBJECT IDENTIFIER

rollbackPointTable		1.3.6.1.4.1.42229.1.2.9.6.1
Represents a rollback point stored in the system. A rollback point represents the system configuration of a specific point in time, that the user may create with the 'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command. The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created. The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created. Rollback points can be deleted as any normal object. A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will be kept even after activation with the 'rollback' RPC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RollbackPointEntry

rollbackPointEntry		1.3.6.1.4.1.42229.1.2.9.6.1.1
Entry of rollbackPointTable
Status: current	Access: not-accessible
OBJECT-TYPE
	RollbackPointEntry

rollbackPointId		1.3.6.1.4.1.42229.1.2.9.6.1.1.1
Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..10

rollbackPointCreationTime		1.3.6.1.4.1.42229.1.2.9.6.1.1.2
Timestamp when this rollback-point was created
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

rollbackPointCreationTrigger		1.3.6.1.4.1.42229.1.2.9.6.1.1.3
Describes the author user-name of this rollback-point
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesUserName

rollbackPointDescription		1.3.6.1.4.1.42229.1.2.9.6.1.1.4
User defined description of this rollback-point
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..200)

rollbackPointType		1.3.6.1.4.1.42229.1.2.9.6.1.1.5
The type of the rollback-point default value :normal
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), backup(2)

logServer		1.3.6.1.4.1.42229.1.2.9.8
OBJECT IDENTIFIER

logServerTable		1.3.6.1.4.1.42229.1.2.9.8.1
Grouping the configuration parameters for log forwarding.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LogServerEntry

logServerEntry		1.3.6.1.4.1.42229.1.2.9.8.1.1
Entry of logServerTable
Status: current	Access: not-accessible
OBJECT-TYPE
	LogServerEntry

logServerName		1.3.6.1.4.1.42229.1.2.9.8.1.1.1
The name for the endpoint to forwarding logs to.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..64)

logServerIpAddress		1.3.6.1.4.1.42229.1.2.9.8.1.1.2
The leaf uniquely specifies the ipv4 address of the remote host.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4Address

logServerTransport		1.3.6.1.4.1.42229.1.2.9.8.1.1.3
It is the transport protocol used when forwarding logs. default value :udp
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), udp(2)

logServerPort		1.3.6.1.4.1.42229.1.2.9.8.1.1.4
This leaf specifies the port number used to deliver messages to the remote server. default value :514
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesPortNumber

logServerDestinationFacilityType		1.3.6.1.4.1.42229.1.2.9.8.1.1.5
Switching of the function destination-facility default value :disabled
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesEnableSwitch

logServerDestinationFacility		1.3.6.1.4.1.42229.1.2.9.8.1.1.6
This leaf specifies the facility used in messages delivered to the remote server. default value :23
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

logFacility		1.3.6.1.4.1.42229.1.2.9.10
OBJECT IDENTIFIER

logFacilityTable		1.3.6.1.4.1.42229.1.2.9.10.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LogFacilityEntry

logFacilityEntry		1.3.6.1.4.1.42229.1.2.9.10.1.1
Entry of logFacilityTable
Status: current	Access: not-accessible
OBJECT-TYPE
	LogFacilityEntry

logFacilityLogSelectorFacility		1.3.6.1.4.1.42229.1.2.9.10.1.1.1
The leaf uniquely identifies a syslog facility for forwarding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	security(1), alarm(2), event(3), configuration(4), cryptoConfiguration(5), cryptoSecurity(6), cryptoEvent(7), cryptoAlarm(8)

logFacilityLogSelectorSeverity		1.3.6.1.4.1.42229.1.2.9.10.1.1.2
The system log selected severity level for forwarding default value :debug
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7)

logFacilityCompareOp		1.3.6.1.4.1.42229.1.2.9.10.1.1.3
This leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higher
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	equalsOrHigher(1), equals(2), notEquals(3)

timeManager		1.3.6.1.4.1.42229.1.2.10
OBJECT IDENTIFIER

timeManagerInfo		1.3.6.1.4.1.42229.1.2.10.1
OBJECT IDENTIFIER

timeManagerTimezone		1.3.6.1.4.1.42229.1.2.10.1.1
Indicates the Name of the Time Zone of this NE. default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT]
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	internationalDateLineWestGmt1200(1), midwayIslandSamoaGmt1100(2), hawaiiGmt1000(3), alaskaGmt0900(4), pacificTimeUsAndCanadaGmt0800(5), arizonaGmt0700(6), mountainTimeUsAndCanadaGmt0700(7), centralamericaGmt0600(8), centralTimeUsAndCanadaGmt0600(9), mexicoCityTegucigalpaGmt0600(10), saskatchewanGmt0600(11), bagotaLimaQuitoGmt0500(12), easternTimeUsAndCanadaGmt0500(13), indianaEastGmt0500(14), caracasLaPazGmt0430(15), atlanticTimeCanadaGmt0400(16), santiagoGmt0400(17), newfoundlandGmt0330(18), brasiliaGmt0300(19), buenosAiresGeorgetownGmt0300(20), greenlandGmt0300(21), midAtlanticGmt0200(22), azoresGmt0100(23), capeVerdeIsGmt0100(24), casablancaMonroviaGmt(25), greenwichMeanTimeDublinEdinburghLisbonLondonGmt(26), amsterdamCopenhagenMadridParisvilniusGmtplus0100(27), belgradeSarajevoSkopjeSofijaZargrebGmtplus0100(28), bratislavaBudapestLjublijanaPragueWasawGmtplus0100(29), brusselsBerlinBernRomeStockholmViennaGmtplus0100(30), westCentralAfricaGmtplus0100(31), athensIstanbulMinskGmtplus0200(32), bucharestGmtplus0200(33), cairoGmtplus0200(34), hararePretoriaGmtplus0200(35), helsinkiRigaTallinnGmtplus0200(36), jerusalemGmtplus0200(37), israelGmtplus0200(38), baghdadGmtplus0300(39), kuwaitRiyadhGmtplus0300(40), moscowStPetersburgVolgogradGmtplus0300(41), nairobiGmtplus0300(42), tehranGmtplus0330(43), abuDhabiMuscatGmtplus0400(44), bakuGmtplus0400(45), tbilisiGmtplus0400(46), kabulGmtplus0430(47), ekaterinburgGmtplus0500(48), islamabadKarachiTashkentGmtplus0500(49), mumbaiCalcuttaChennaiNewDelhiGmtplus0530(50), colomboGmtplus0530(51), kathmanduGmtplus0545(52), dhakaGmtplus0600(53), almatyGmtplus0600(54), rangoonGmtplus0630(55), bangkokHanoiJakartaGmtplus0700(56), beijingChongqingHongKongUrumqiGmtplus0800(57), perthGmtplus0800(58), singaporeKualaLumpurGmtplus0800(59), taipeiGmtplus0800(60), osakaSapporoTokyoGmtplus0900(61), seoulGmtplus0900(62), yakutskGmtplus0900(63), adelaideGmtplus0930(64), darwinGmtplus0930(65), brisbaneGmtplus1000(66), canberraMelbourneSydneyGmtplus1000(67), guamPortMoresbyGmtplus1000(68), hobartGmtplus1000(69), vladivostokGmtplus1000(70), magadanSolomonIsNewCaledoniaGmtplus1100(71), aucklandWellingtonGmtplus1200(72), fijiKamchatkaMarshallIsGmtplus1200(73), eniwetokKwajaleinGmtplus1200(74), nukuAlofaGmtplus1300(75), kiritimatiGmtplus1400(76)

timeManagerCurrentTime		1.3.6.1.4.1.42229.1.2.10.1.2
Indicates the current Date and Time of this NE.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

timeManagerLastStartTime		1.3.6.1.4.1.42229.1.2.10.1.3
Indicate the time of last system boot.
Status: current	Access: read-only
OBJECT-TYPE
	IetfYangTypesDateAndTime

timeManagerUpTime		1.3.6.1.4.1.42229.1.2.10.1.4
Indicate how long the system has been running.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

timeManagerTimeSourceState		1.3.6.1.4.1.42229.1.2.10.1.5
Indicates the state of the time source.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	external(1), freerun(2)

ntp		1.3.6.1.4.1.42229.1.2.10.2
OBJECT IDENTIFIER

ntpEnabled		1.3.6.1.4.1.42229.1.2.10.2.1
Indicates if NTP is enabled. default value :false
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ntpCurrentTimeSource		1.3.6.1.4.1.42229.1.2.10.2.2
Indicates the current time source. default value :0.0.0.0
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4AddressNoZone

ntpAssociation		1.3.6.1.4.1.42229.1.2.10.3
OBJECT IDENTIFIER

ntpAssociationTable		1.3.6.1.4.1.42229.1.2.10.3.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpAssociationEntry

ntpAssociationEntry		1.3.6.1.4.1.42229.1.2.10.3.1.1
Entry of ntpAssociationTable
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpAssociationEntry

ntpAssociationSource		1.3.6.1.4.1.42229.1.2.10.3.1.1.1
Indicates the ntp-association-source.
Status: current	Access: read-only
OBJECT-TYPE
	IetfInetTypesIpv4AddressNoZone	Size(1..64)

ntpAssociationType		1.3.6.1.4.1.42229.1.2.10.3.1.1.2
Indicates the ntp association type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ntpServer(1), ntpPeer(2)

ntpAssociationPreferredNtpAssociation		1.3.6.1.4.1.42229.1.2.10.3.1.1.3
Indicates if this is preferred.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ntpAssociationNtpAdminState		1.3.6.1.4.1.42229.1.2.10.3.1.1.4
The administrative state specifies the permission to use or prohibition against using the resource. default value :up
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ntpAssociationStatus		1.3.6.1.4.1.42229.1.2.10.4
OBJECT IDENTIFIER

ntpAssociationStatusTable		1.3.6.1.4.1.42229.1.2.10.4.1
NULL
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NtpAssociationStatusEntry

ntpAssociationStatusEntry		1.3.6.1.4.1.42229.1.2.10.4.1.1
Entry of ntpAssociationStatusTable
Status: current	Access: not-accessible
OBJECT-TYPE
	NtpAssociationStatusEntry

ntpAssociationStatusNtpAssociationRefid		1.3.6.1.4.1.42229.1.2.10.4.1.1.1
Reference clock type or address for the peer.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

ntpAssociationStatusNtpStratum		1.3.6.1.4.1.42229.1.2.10.4.1.1.2
This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ntpAssociationStatusNtpPollingInterval		1.3.6.1.4.1.42229.1.2.10.4.1.1.3
NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:seconds
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ntpAssociationStatusNtpPrecision		1.3.6.1.4.1.42229.1.2.10.4.1.1.4
This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ntpAssociationStatusNtpAssociationOffset		1.3.6.1.4.1.42229.1.2.10.4.1.1.5
Indicates the offset between the local clock and the superior reference clock. UNITS:milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ntpAssociationStatusNtpAssociationReach		1.3.6.1.4.1.42229.1.2.10.4.1.1.6
Indicates the reachability of the configured server or peer.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ntpAssociationStatusNtpAssociationDelay		1.3.6.1.4.1.42229.1.2.10.4.1.1.7
Indicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ntpAssociationStatusNtpAssociationDispersion		1.3.6.1.4.1.42229.1.2.10.4.1.1.8
Indicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

ztc		1.3.6.1.4.1.42229.1.2.11
OBJECT IDENTIFIER

ztcInfo		32.1
OBJECT IDENTIFIER

ztcEnabled		32.1.1
enable/disable Zero Touch commissioning. default value :true
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ztcStatus		32.1.2
Shows the ZTC process status: disabled - ZTC will not be attempted because it was disabled via configuration ready - ZTC will be attempted when able to communicate with external ZTC server ongoing - ZTC is ongoing failed - some problems occurred during ZTC done - ZTC completed successfully. default value :ready
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), ready(1), ongoing(2), failed(3), done(4)

common		1.3.6.1.4.1.42229.1.2.13
OBJECT IDENTIFIER

bitErrorRatePreFec		1.3.6.1.4.1.42229.1.2.13.1
OBJECT IDENTIFIER

bitErrorRatePreFecTable		1.3.6.1.4.1.42229.1.2.13.1.1
statistics value: average, minimum, maximum and instant value for bit error rate before fec
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BitErrorRatePreFecEntry

bitErrorRatePreFecEntry		1.3.6.1.4.1.42229.1.2.13.1.1.1
Entry of bitErrorRatePreFecTable
Status: current	Access: not-accessible
OBJECT-TYPE
	BitErrorRatePreFecEntry

bitErrorRatePreFecInstant		1.3.6.1.4.1.42229.1.2.13.1.1.1.1
the instant value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePreFecAvg		1.3.6.1.4.1.42229.1.2.13.1.1.1.2
the average value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePreFecMin		1.3.6.1.4.1.42229.1.2.13.1.1.1.3
the minimum value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePreFecMax		1.3.6.1.4.1.42229.1.2.13.1.1.1.4
the maximum value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePostFec		1.3.6.1.4.1.42229.1.2.13.2
OBJECT IDENTIFIER

bitErrorRatePostFecTable		1.3.6.1.4.1.42229.1.2.13.2.1
statistics value: average, minimum, maximum and instant value for bit error rate post fec
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BitErrorRatePostFecEntry

bitErrorRatePostFecEntry		1.3.6.1.4.1.42229.1.2.13.2.1.1
Entry of bitErrorRatePostFecTable
Status: current	Access: not-accessible
OBJECT-TYPE
	BitErrorRatePostFecEntry

bitErrorRatePostFecInstant		1.3.6.1.4.1.42229.1.2.13.2.1.1.1
the instant value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePostFecAvg		1.3.6.1.4.1.42229.1.2.13.2.1.1.2
the average value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePostFecMin		1.3.6.1.4.1.42229.1.2.13.2.1.1.3
the minimum value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

bitErrorRatePostFecMax		1.3.6.1.4.1.42229.1.2.13.2.1.1.4
the maximum value of statistics counter UNITS:bit-ratio
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

inUtilization		1.3.6.1.4.1.42229.1.2.13.3
OBJECT IDENTIFIER

inUtilizationTable		1.3.6.1.4.1.42229.1.2.13.3.1
statistics value: average, minimum, maximum and instant value for RX utilization
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InUtilizationEntry

inUtilizationEntry		1.3.6.1.4.1.42229.1.2.13.3.1.1
Entry of inUtilizationTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InUtilizationEntry

inUtilizationInstant		1.3.6.1.4.1.42229.1.2.13.3.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

inUtilizationAvg		1.3.6.1.4.1.42229.1.2.13.3.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

inUtilizationMin		1.3.6.1.4.1.42229.1.2.13.3.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

inUtilizationMax		1.3.6.1.4.1.42229.1.2.13.3.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

outUtilization		1.3.6.1.4.1.42229.1.2.13.4
OBJECT IDENTIFIER

outUtilizationTable		1.3.6.1.4.1.42229.1.2.13.4.1
statistics value: average, minimum, maximum and instant value for TX utilization
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutUtilizationEntry

outUtilizationEntry		1.3.6.1.4.1.42229.1.2.13.4.1.1
Entry of outUtilizationTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutUtilizationEntry

outUtilizationInstant		1.3.6.1.4.1.42229.1.2.13.4.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

outUtilizationAvg		1.3.6.1.4.1.42229.1.2.13.4.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

outUtilizationMin		1.3.6.1.4.1.42229.1.2.13.4.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

outUtilizationMax		1.3.6.1.4.1.42229.1.2.13.4.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesPercentage

oduDelay		1.3.6.1.4.1.42229.1.2.13.23
OBJECT IDENTIFIER

oduDelayTable		1.3.6.1.4.1.42229.1.2.13.23.1
statistics value: average, minimum, maximum and instant value for measured odu signal delay
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OduDelayEntry

oduDelayEntry		1.3.6.1.4.1.42229.1.2.13.23.1.1
Entry of oduDelayTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OduDelayEntry

oduDelayInstant		1.3.6.1.4.1.42229.1.2.13.23.1.1.1
the instant value of statistics counter UNITS:microseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduDelayAvg		1.3.6.1.4.1.42229.1.2.13.23.1.1.2
the average value of statistics counter UNITS:microseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduDelayMin		1.3.6.1.4.1.42229.1.2.13.23.1.1.3
the minimum value of statistics counter UNITS:microseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

oduDelayMax		1.3.6.1.4.1.42229.1.2.13.23.1.1.4
the maximum value of statistics counter UNITS:microseconds
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

inOpticalPower		1.3.6.1.4.1.42229.1.2.13.24
OBJECT IDENTIFIER

inOpticalPowerTable		1.3.6.1.4.1.42229.1.2.13.24.1
statistics value: average, minimum, maximum and instant value for RX optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InOpticalPowerEntry

inOpticalPowerEntry		1.3.6.1.4.1.42229.1.2.13.24.1.1
Entry of inOpticalPowerTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InOpticalPowerEntry

inOpticalPowerInstant		1.3.6.1.4.1.42229.1.2.13.24.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerAvg		1.3.6.1.4.1.42229.1.2.13.24.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerMin		1.3.6.1.4.1.42229.1.2.13.24.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerMax		1.3.6.1.4.1.42229.1.2.13.24.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPower		1.3.6.1.4.1.42229.1.2.13.25
OBJECT IDENTIFIER

outOpticalPowerTable		1.3.6.1.4.1.42229.1.2.13.25.1
statistics value: average, minimum, maximum and instant value for TX optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOpticalPowerEntry

outOpticalPowerEntry		1.3.6.1.4.1.42229.1.2.13.25.1.1
Entry of outOpticalPowerTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutOpticalPowerEntry

outOpticalPowerInstant		1.3.6.1.4.1.42229.1.2.13.25.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerAvg		1.3.6.1.4.1.42229.1.2.13.25.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerMin		1.3.6.1.4.1.42229.1.2.13.25.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerMax		1.3.6.1.4.1.42229.1.2.13.25.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

differentialGroupDelay		1.3.6.1.4.1.42229.1.2.13.26
OBJECT IDENTIFIER

differentialGroupDelayTable		1.3.6.1.4.1.42229.1.2.13.26.1
statistics value: average, minimum, maximum and instant value for differential group delay
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DifferentialGroupDelayEntry

differentialGroupDelayEntry		1.3.6.1.4.1.42229.1.2.13.26.1.1
Entry of differentialGroupDelayTable
Status: current	Access: not-accessible
OBJECT-TYPE
	DifferentialGroupDelayEntry

differentialGroupDelayInstant		1.3.6.1.4.1.42229.1.2.13.26.1.1.1
the instant value of statistics counter UNITS:ps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

differentialGroupDelayAvg		1.3.6.1.4.1.42229.1.2.13.26.1.1.2
the average value of statistics counter UNITS:ps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

differentialGroupDelayMin		1.3.6.1.4.1.42229.1.2.13.26.1.1.3
the minimum value of statistics counter UNITS:ps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

differentialGroupDelayMax		1.3.6.1.4.1.42229.1.2.13.26.1.1.4
the maximum value of statistics counter UNITS:ps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

chromaticDispersion		1.3.6.1.4.1.42229.1.2.13.27
OBJECT IDENTIFIER

chromaticDispersionTable		1.3.6.1.4.1.42229.1.2.13.27.1
statistics value: average, minimum, maximum and instant value for chromatic dispersion
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChromaticDispersionEntry

chromaticDispersionEntry		1.3.6.1.4.1.42229.1.2.13.27.1.1
Entry of chromaticDispersionTable
Status: current	Access: not-accessible
OBJECT-TYPE
	ChromaticDispersionEntry

chromaticDispersionInstant		1.3.6.1.4.1.42229.1.2.13.27.1.1.1
the instant value of statistics counter UNITS:ps/nm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chromaticDispersionAvg		1.3.6.1.4.1.42229.1.2.13.27.1.1.2
the average value of statistics counter UNITS:ps/pm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chromaticDispersionMin		1.3.6.1.4.1.42229.1.2.13.27.1.1.3
the minimum value of statistics counter UNITS:ps/pm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chromaticDispersionMax		1.3.6.1.4.1.42229.1.2.13.27.1.1.4
the maximum value of statistics counter UNITS:ps/pm
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

osnr		1.3.6.1.4.1.42229.1.2.13.28
OBJECT IDENTIFIER

osnrTable		14.1
statistics value: average, minimum, maximum and instant value for osnr
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OsnrEntry

osnrEntry		14.1.1
Entry of osnrTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OsnrEntry

osnrInstant		14.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

osnrAvg		14.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

osnrMin		14.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

osnrMax		14.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

qFactor		1.3.6.1.4.1.42229.1.2.13.29
OBJECT IDENTIFIER

qFactorTable		17.1
statistics value: average, minimum, maximum and instant value for q-factor
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		QFactorEntry

qFactorEntry		17.1.1
Entry of qFactorTable
Status: current	Access: not-accessible
OBJECT-TYPE
	QFactorEntry

qFactorInstant		17.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

qFactorAvg		17.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

qFactorMin		17.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

qFactorMax		17.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

polarizationDependentLoss		1.3.6.1.4.1.42229.1.2.13.30
OBJECT IDENTIFIER

polarizationDependentLossTable		1.3.6.1.4.1.42229.1.2.13.30.1
statistics value: average, minimum, maximum and instant value for polarization dependent loss
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolarizationDependentLossEntry

polarizationDependentLossEntry		1.3.6.1.4.1.42229.1.2.13.30.1.1
Entry of polarizationDependentLossTable
Status: current	Access: not-accessible
OBJECT-TYPE
	PolarizationDependentLossEntry

polarizationDependentLossInstant		1.3.6.1.4.1.42229.1.2.13.30.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

polarizationDependentLossAvg		1.3.6.1.4.1.42229.1.2.13.30.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

polarizationDependentLossMin		1.3.6.1.4.1.42229.1.2.13.30.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

polarizationDependentLossMax		1.3.6.1.4.1.42229.1.2.13.30.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesDBPrecision1

inOpticalFrequency		1.3.6.1.4.1.42229.1.2.13.31
OBJECT IDENTIFIER

inOpticalFrequencyTable		1.3.6.1.4.1.42229.1.2.13.31.1
statistics value: average, minimum, maximum and instant value for RX optical frequency
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InOpticalFrequencyEntry

inOpticalFrequencyEntry		1.3.6.1.4.1.42229.1.2.13.31.1.1
Entry of inOpticalFrequencyTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InOpticalFrequencyEntry

inOpticalFrequencyInstant		1.3.6.1.4.1.42229.1.2.13.31.1.1.1
the instant value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

inOpticalFrequencyAvg		1.3.6.1.4.1.42229.1.2.13.31.1.1.2
the average value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

inOpticalFrequencyMin		1.3.6.1.4.1.42229.1.2.13.31.1.1.3
the minimum value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

inOpticalFrequencyMax		1.3.6.1.4.1.42229.1.2.13.31.1.1.4
the maximum value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

outOpticalFrequency		1.3.6.1.4.1.42229.1.2.13.32
OBJECT IDENTIFIER

outOpticalFrequencyTable		1.3.6.1.4.1.42229.1.2.13.32.1
statistics value: average, minimum, maximum and instant value for TX optical frequency
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOpticalFrequencyEntry

outOpticalFrequencyEntry		1.3.6.1.4.1.42229.1.2.13.32.1.1
Entry of outOpticalFrequencyTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutOpticalFrequencyEntry

outOpticalFrequencyInstant		1.3.6.1.4.1.42229.1.2.13.32.1.1.1
the instant value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

outOpticalFrequencyAvg		1.3.6.1.4.1.42229.1.2.13.32.1.1.2
the average value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

outOpticalFrequencyMin		1.3.6.1.4.1.42229.1.2.13.32.1.1.3
the minimum value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

outOpticalFrequencyMax		1.3.6.1.4.1.42229.1.2.13.32.1.1.4
the maximum value of statistics counter UNITS:MHz
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

inOpticalPowerLaneHigh		1.3.6.1.4.1.42229.1.2.13.33
OBJECT IDENTIFIER

inOpticalPowerLaneHighTable		1.3.6.1.4.1.42229.1.2.13.33.1
statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InOpticalPowerLaneHighEntry

inOpticalPowerLaneHighEntry		1.3.6.1.4.1.42229.1.2.13.33.1.1
Entry of inOpticalPowerLaneHighTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InOpticalPowerLaneHighEntry

inOpticalPowerLaneHighInstant		1.3.6.1.4.1.42229.1.2.13.33.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneHighAvg		1.3.6.1.4.1.42229.1.2.13.33.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneHighMin		1.3.6.1.4.1.42229.1.2.13.33.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneHighMax		1.3.6.1.4.1.42229.1.2.13.33.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneLow		1.3.6.1.4.1.42229.1.2.13.34
OBJECT IDENTIFIER

inOpticalPowerLaneLowTable		1.3.6.1.4.1.42229.1.2.13.34.1
statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InOpticalPowerLaneLowEntry

inOpticalPowerLaneLowEntry		1.3.6.1.4.1.42229.1.2.13.34.1.1
Entry of inOpticalPowerLaneLowTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InOpticalPowerLaneLowEntry

inOpticalPowerLaneLowInstant		1.3.6.1.4.1.42229.1.2.13.34.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneLowAvg		1.3.6.1.4.1.42229.1.2.13.34.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneLowMin		1.3.6.1.4.1.42229.1.2.13.34.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneLowMax		1.3.6.1.4.1.42229.1.2.13.34.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneTotal		1.3.6.1.4.1.42229.1.2.13.35
OBJECT IDENTIFIER

inOpticalPowerLaneTotalTable		1.3.6.1.4.1.42229.1.2.13.35.1
statistics value: average, minimum, maximum and instant value for total value of RX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InOpticalPowerLaneTotalEntry

inOpticalPowerLaneTotalEntry		1.3.6.1.4.1.42229.1.2.13.35.1.1
Entry of inOpticalPowerLaneTotalTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InOpticalPowerLaneTotalEntry

inOpticalPowerLaneTotalInstant		1.3.6.1.4.1.42229.1.2.13.35.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneTotalAvg		1.3.6.1.4.1.42229.1.2.13.35.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneTotalMin		1.3.6.1.4.1.42229.1.2.13.35.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

inOpticalPowerLaneTotalMax		1.3.6.1.4.1.42229.1.2.13.35.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneHigh		1.3.6.1.4.1.42229.1.2.13.36
OBJECT IDENTIFIER

outOpticalPowerLaneHighTable		1.3.6.1.4.1.42229.1.2.13.36.1
statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOpticalPowerLaneHighEntry

outOpticalPowerLaneHighEntry		1.3.6.1.4.1.42229.1.2.13.36.1.1
Entry of outOpticalPowerLaneHighTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutOpticalPowerLaneHighEntry

outOpticalPowerLaneHighInstant		1.3.6.1.4.1.42229.1.2.13.36.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneHighAvg		1.3.6.1.4.1.42229.1.2.13.36.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneHighMin		1.3.6.1.4.1.42229.1.2.13.36.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneHighMax		1.3.6.1.4.1.42229.1.2.13.36.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneLow		1.3.6.1.4.1.42229.1.2.13.37
OBJECT IDENTIFIER

outOpticalPowerLaneLowTable		1.3.6.1.4.1.42229.1.2.13.37.1
statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOpticalPowerLaneLowEntry

outOpticalPowerLaneLowEntry		1.3.6.1.4.1.42229.1.2.13.37.1.1
Entry of outOpticalPowerLaneLowTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutOpticalPowerLaneLowEntry

outOpticalPowerLaneLowInstant		1.3.6.1.4.1.42229.1.2.13.37.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneLowAvg		1.3.6.1.4.1.42229.1.2.13.37.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneLowMin		1.3.6.1.4.1.42229.1.2.13.37.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneLowMax		1.3.6.1.4.1.42229.1.2.13.37.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneTotal		1.3.6.1.4.1.42229.1.2.13.38
OBJECT IDENTIFIER

outOpticalPowerLaneTotalTable		1.3.6.1.4.1.42229.1.2.13.38.1
statistics value: average, minimum, maximum and instant value for total value of TX lane optical power
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutOpticalPowerLaneTotalEntry

outOpticalPowerLaneTotalEntry		1.3.6.1.4.1.42229.1.2.13.38.1.1
Entry of outOpticalPowerLaneTotalTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutOpticalPowerLaneTotalEntry

outOpticalPowerLaneTotalInstant		1.3.6.1.4.1.42229.1.2.13.38.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneTotalAvg		1.3.6.1.4.1.42229.1.2.13.38.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneTotalMin		1.3.6.1.4.1.42229.1.2.13.38.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

outOpticalPowerLaneTotalMax		1.3.6.1.4.1.42229.1.2.13.38.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesOpticalPower

moduleTemperature		1.3.6.1.4.1.42229.1.2.13.39
OBJECT IDENTIFIER

moduleTemperatureTable		1.3.6.1.4.1.42229.1.2.13.39.1
statistics value: average, minimum, maximum and instant value for module temperature
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ModuleTemperatureEntry

moduleTemperatureEntry		1.3.6.1.4.1.42229.1.2.13.39.1.1
Entry of moduleTemperatureTable
Status: current	Access: not-accessible
OBJECT-TYPE
	ModuleTemperatureEntry

moduleTemperatureInstant		1.3.6.1.4.1.42229.1.2.13.39.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

moduleTemperatureAvg		1.3.6.1.4.1.42229.1.2.13.39.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

moduleTemperatureMin		1.3.6.1.4.1.42229.1.2.13.39.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

moduleTemperatureMax		1.3.6.1.4.1.42229.1.2.13.39.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

inletTemperature		1.3.6.1.4.1.42229.1.2.13.40
OBJECT IDENTIFIER

inletTemperatureTable		1.3.6.1.4.1.42229.1.2.13.40.1
statistics value: average, minimum, maximum and instant value for inlet temperature
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InletTemperatureEntry

inletTemperatureEntry		1.3.6.1.4.1.42229.1.2.13.40.1.1
Entry of inletTemperatureTable
Status: current	Access: not-accessible
OBJECT-TYPE
	InletTemperatureEntry

inletTemperatureInstant		1.3.6.1.4.1.42229.1.2.13.40.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

inletTemperatureAvg		1.3.6.1.4.1.42229.1.2.13.40.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

inletTemperatureMin		1.3.6.1.4.1.42229.1.2.13.40.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

inletTemperatureMax		1.3.6.1.4.1.42229.1.2.13.40.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

outletTemperature		1.3.6.1.4.1.42229.1.2.13.41
OBJECT IDENTIFIER

outletTemperatureTable		1.3.6.1.4.1.42229.1.2.13.41.1
statistics value: average, minimum, maximum and instant value for outlet temperature
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OutletTemperatureEntry

outletTemperatureEntry		1.3.6.1.4.1.42229.1.2.13.41.1.1
Entry of outletTemperatureTable
Status: current	Access: not-accessible
OBJECT-TYPE
	OutletTemperatureEntry

outletTemperatureInstant		1.3.6.1.4.1.42229.1.2.13.41.1.1.1
the instant value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

outletTemperatureAvg		1.3.6.1.4.1.42229.1.2.13.41.1.1.2
the average value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

outletTemperatureMin		1.3.6.1.4.1.42229.1.2.13.41.1.1.3
the minimum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3

outletTemperatureMax		1.3.6.1.4.1.42229.1.2.13.41.1.1.4
the maximum value of statistics counter
Status: current	Access: read-only
OBJECT-TYPE
	CoriantTypesTemperaturePrecision3