COMMON-MIB

File: COMMON-MIB.mib (14847 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString PhysAddress

Defined Types

AgentMibCapabilityEntry  
SEQUENCE    
  agentMibCapabilityIndex INTEGER
  agentMibCapabilityDescr DisplayString
  agentMibCapabilityVersion INTEGER
  agentMibCapabilityType INTEGER

AgentIpIfEntry  
SEQUENCE    
  agentIpIfIndex INTEGER
  agentIpIfAddress IpAddress
  agentIpIfNetMask IpAddress
  agentIpIfDefaultRouter IpAddress
  agentIpIfMacAddr PhysAddress
  agentIpIfType INTEGER

AgentIpTrapManagerEntry  
SEQUENCE    
  agentIpTrapManagerIpAddr IpAddress
  agentIpTrapManagerComm DisplayString
  agentIpTrapManagerStatus INTEGER

Defined Values

marconi 1.3.6.1.4.1.326
OBJECT IDENTIFIER    

systems 1.3.6.1.4.1.326.2
OBJECT IDENTIFIER    

external 1.3.6.1.4.1.326.2.20
OBJECT IDENTIFIER    


dlinkcommon 1.3.6.1.4.1.326.2.20.1.1
OBJECT IDENTIFIER    

golf 1.3.6.1.4.1.326.2.20.1.2
OBJECT IDENTIFIER    

golfproducts 1.3.6.1.4.1.326.2.20.1.2.1
OBJECT IDENTIFIER    

golfcommon 1.3.6.1.4.1.326.2.20.1.2.2
OBJECT IDENTIFIER    

marconi-mgmt 1.3.6.1.4.1.326.2.20.1.2.2.2
OBJECT IDENTIFIER    

agentConfigInfo 1.3.6.1.4.1.326.2.20.1.2.2.2.1
OBJECT IDENTIFIER    

agentBasicInfo 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1
OBJECT IDENTIFIER    

agentRuntimeSwVersion 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.1
This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

agentPromFwVersion 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.2
This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

agentHwRevision 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.3
This is a integer number of the hardware revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentMgmtProtocolCapability 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.4
The network management protocol(s) supported by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4)  

agentMibCapabilityTable 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5
A list of MIB capability entries supported by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentMibCapabilityEntry

agentMibCapabilityEntry 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1
A MIB capability entry contains objects describing a particular MIB supported by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgentMibCapabilityEntry  

agentMibCapabilityIndex 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.1
A list of agentMibCapabilityDescr entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentMibCapabilityDescr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.2
The name of the MIB supported by the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

agentMibCapabilityVersion 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.3
The version of the MIB specified in this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentMibCapabilityType 1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.4
The type of the MIB specified in this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), standard(2), proprietary(3), experiment(4)  

agentBasicConfig 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2
OBJECT IDENTIFIER    

agentSwUpdateMode 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.1
The download media used by the system to download the runtime software.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), network-load(2), out-of-band-load(3)  

agentSwUpdateCtrl 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.2
Current status of configuration software download control. The setting is effective the next time you reset or power on the hub.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

agentBootFile 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.3
The name of the configuration file to be downloaded from the TFTP server when software update is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentFirmwareUpdateCtrl 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.4
Current status of firmware software download control. The setting is effective the next time you reset or power on the hub.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

agentFirmwareFile 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.5
The name of the firmware file to be downloaded from the TFTP server when software update is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentSystemReset 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.6
This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), cold-start(2), warm-start(3), no-reset(4)  

agentRs232PortConfig 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.7
This object indicates the RS-232C mode while device restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), console(2), out-of-band(3)  

agentOutOfBandBaudRateConfig 1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.8
This object indicates the out_of_band baud rate while device restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), baudRate-2400(2), baudRate-9600(3), baudRate-19200(4), baudRate-38400(5)  

agentIpProtoConfig 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3
OBJECT IDENTIFIER    

agentIpNumOfIf 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.1
The total number of IP interfaces supported by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentIpIfTable 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2
A list of IP interface entries supported by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpIfEntry

agentIpIfEntry 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1
An agentIPIfEntry contains information about a particular IP interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgentIpIfEntry  

agentIpIfIndex 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.1
This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

agentIpIfAddress 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.2
The IP address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agentIpIfNetMask 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.3
The IP net mask for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agentIpIfDefaultRouter 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.4
The default gateway for this IP interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agentIpIfMacAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.5
The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of zero length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentIpIfType 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.6
The physical layer interface of the IP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ethernet-csmacd(6), slip(28)  

agentIpBootServerAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.3
The IP Address of Boot Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

agentIpGetIpFromBootpServer 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.4
This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), bootp(3), dhcp(4)  

agentIpUnauthAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.5
The IP address of an unauthorized SNMP packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agentIpUnauthComm 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.6
The community string of an unauthorized SNMP packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

agentIpLastBootServerAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.7
The last IP address used as Boot server IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agentIpLastIpAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.8
The last IP address used as the agent system IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agentIpTrapManagerTable 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9
A list of trap manager entries to which to send SNMP traps .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpTrapManagerEntry

agentIpTrapManagerEntry 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1
This entry contains the particular trap manager settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgentIpTrapManagerEntry  

agentIpTrapManagerIpAddr 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.1
The IP address to receive SNMP traps from this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

agentIpTrapManagerComm 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.2
The community string of the SNMP trap packet sent to the trap manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

agentIpTrapManagerStatus 1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.3
This object indicates whether or not the trap should be send to this trap manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)