COLUBRIS-SENSOR-MIB

File: COLUBRIS-SENSOR-MIB.mib (4086 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF COLUBRIS-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP colubrisMgmtV2

Defined Values

colubrisSensorMIB 1.3.6.1.4.1.8744.5.31
Colubris Sensor MIB.
MODULE-IDENTITY    

colubrisSensorMIBObjects 1.3.6.1.4.1.8744.5.31.1
OBJECT IDENTIFIER    

coSensorStatusGroup 1.3.6.1.4.1.8744.5.31.1.1
OBJECT IDENTIFIER    

coSensorOperState 1.3.6.1.4.1.8744.5.31.1.1.1
Indicates if at least one radio on the access point is currently in sensor mode.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

coSensorConfigMode 1.3.6.1.4.1.8744.5.31.1.1.2
Indicates if the sensor uses one radio (shared) or both radios (dedicated).
OBJECT-TYPE    
  INTEGER shared(1), dedicated(2)  

coSensorOperMode 1.3.6.1.4.1.8744.5.31.1.1.3
Indicates the current operational mode of the sensor.
OBJECT-TYPE    
  INTEGER unknown(1), workingNormally(2), troubleshootingBG(3), intrusionPreventionBG(4), troubleshootingA(5), troubleshootingABG(6), troubleshootingAIntrusionPreventionBG(7), intrusionPreventionA(8), intrusionPreventionATroubleshootingBG(9), intrusionPreventionABG(10), upgradingSoftware(11), noEthernetLink(12), noIpAddress(13), noRfManagerServer(14), notActiveOrStarting(15)  

colubrisSensorMIBConformance 1.3.6.1.4.1.8744.5.31.2
OBJECT IDENTIFIER    

colubrisSensorMIBCompliances 1.3.6.1.4.1.8744.5.31.2.1
OBJECT IDENTIFIER    

colubrisSensorMIBGroups 1.3.6.1.4.1.8744.5.31.2.2
OBJECT IDENTIFIER    

colubrisSensorMIBCompliance 1.3.6.1.4.1.8744.5.31.2.1.1
The compliance statement for the Sensor MIB.
MODULE-COMPLIANCE    

colubrisSensorStatusMIBGroup 1.3.6.1.4.1.8744.5.31.2.2.1
A collection of objects for Sensor status.
OBJECT-GROUP