COLUBRIS-BANDWIDTH-CONTROL-MIB
File:
COLUBRIS-BANDWIDTH-CONTROL-MIB.mib (8369 bytes)
Imported modules
Imported symbols
Defined Types
CoBandwidthControlLevelEntry |
|
SEQUENCE |
|
|
|
|
coBandwidthControlLevelIndex |
ColubrisPriorityQueue |
|
|
coBandwidthControlLevelMinTransmitRate |
Integer32 |
|
|
coBandwidthControlLevelMaxTransmitRate |
Integer32 |
|
|
coBandwidthControlLevelMinReceiveRate |
Integer32 |
|
|
coBandwidthControlLevelMaxReceiveRate |
Integer32 |
|
Defined Values
coBandwidthControlEnable |
1.3.6.1.4.1.8744.5.14.1.1.1 |
Indicates if bandwidth control is enabled or disabled on the
Internet port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
coBandwidthControlMaxTransmitRate |
1.3.6.1.4.1.8744.5.14.1.1.2 |
Indicates the maximum rate at which data can be transmitted on
the Internet port. If traffic exceeds this rate for short
bursts, it is buffered. Long overages will result in data
being dropped. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
coBandwidthControlMaxReceiveRate |
1.3.6.1.4.1.8744.5.14.1.1.3 |
Indicates the maximum rate at which data can be received on
the Internet port. If traffic exceeds this rate for short
bursts it is buffered. Long overages will result in data being
dropped. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
coBandwidthControlLevelEntry |
1.3.6.1.4.1.8744.5.14.1.1.4.1 |
An entry in the coBandwidthControlLevelTable.
coBandwidthControlLevelIndex - Uniquely access a definition
for this particular bandwidth
control level. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CoBandwidthControlLevelEntry |
|
|
coBandwidthControlLevelIndex |
1.3.6.1.4.1.8744.5.14.1.1.4.1.1 |
Specifies the level index. Each index defines a bandwidth
level that traffic can be assigned to. Four indexes are
defined (1 to 4) with the following meanings: 1-Low, 2-Normal,
3- High, 4-Very High. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ColubrisPriorityQueue |
|
|
coBandwidthControlLevelMinTransmitRate |
1.3.6.1.4.1.8744.5.14.1.1.4.1.2 |
Specify the minimum transmit rate for the level as a
percentage of coBandwidthControlMaxTransmitRate. This is the
minimum amount of bandwidth that will be assigned to a level
as soon as outgoing traffic is present on the level. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
coBandwidthControlLevelMaxTransmitRate |
1.3.6.1.4.1.8744.5.14.1.1.4.1.3 |
Specify the maximum transmit rate for the specified level
as a percentage of coBandwidthControlMaxTransmitRate. This is
the maximum amount of outgoing bandwidth that can be consumed
by the level. Traffic in excess will be buffered for short
bursts, and dropped for sustained overages |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
coBandwidthControlLevelMinReceiveRate |
1.3.6.1.4.1.8744.5.14.1.1.4.1.4 |
Specify the minimum receive rate for the specified level
as a percentage of coBandwidthControlMaxReceiveRateRate. This
is the minimum amount of bandwidth that will be assigned to a
level as soon as incoming traffic is present on the level. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
coBandwidthControlLevelMaxReceiveRate |
1.3.6.1.4.1.8744.5.14.1.1.4.1.5 |
Specify the maximum receive rate for the specified level
as a percentage of coBandwidthControlMaxReceiveRateRate. This
is the maximum amount of incoming bandwidth that can be
consumed by the level. Traffic in excess will be buffered for
short bursts, and dropped for sustained overages. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
colubrisBandwidthControlMIBGroup |
1.3.6.1.4.1.8744.5.14.2.2.1 |
A collection of objects for use with Bandwidth Controls. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|