CM-ALARM-MIB

File: CM-ALARM-MIB.mib (65520 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
ADVA-MIB CM-ENTITY-MIB CM-FACILITY-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 TimeStamp DateAndTime
TruthValue VariablePointer DisplayString
TEXTUAL-CONVENTION TrapAlarmSeverity neIndex
shelfIndex slotIndex cmEthernetAccPortIndex
cmEthernetNetPortIndex fsp150cm

Defined Types

CmServiceEffect  
Indicates whether a condition is service affecting or not.
TEXTUAL-CONVENTION    
  INTEGER none(0), nonServiceAffecting(1), serviceAffecting(2)  

CmLocation  
Identifies the location associated with the particular information.
TEXTUAL-CONVENTION    
  INTEGER none(0), both(1), farEnd(2), nearEnd(3), notApplicable(4)  

CmDirection  
Specifies the direction associated with the particular information.
TEXTUAL-CONVENTION    
  INTEGER none(0), bidirectional(1), bothDirections(2), notApplicable(3), receiveDirectionOnly(4), transmitDirectionOnly(5), uniDirectional(6)  

CmConditionType  
Identifies the type of condition or alarm being reported.
TEXTUAL-CONVENTION    
  INTEGER none(0), acoopr(1), hwinitedsysboot(2), userinitednemireboot(3), userinitedsysboot(4), userinitedsysbootdefaultdb(5), userinitedsysbootdbrestore(6), userinitedsysrebootswact(7), sysrecoveryfailed(8), primntpsvrFailed(9), bckupntpsvrFailed(10), swdl-ftip(11), swdl-ftfail(12), swdl-ftpass(13), swdl-instip(14), swdl-instfail(15), swdl-instpass(16), swdl-actip(17), swdl-actfail(18), swdl-actpass(19), swdl-valip(20), swdl-valfail(21), swdl-valpass(22), db-ftip(23), db-ftfail(24), db-ftpass(25), ctneqpt(26), eqptflt(27), forced(28), lockout(29), manualswitch(30), wkswtopr(31), wkswbk(32), mismatch(33), psu1fail(34), psu2fail(35), eqptremoved(36), autonegunknown(37), dyinggasp(38), efmfail(39), efmrce(40), efmrld(41), efmrls(42), lnkdeactivated(43), lnkdownunisolated(44), lnkdowncablefault(45), lnkdowncableremoved(46), lnkdownautonegfailed(47), lnkdownlpbkfault(48), lnkdowncabletestfault(49), lnkdown(50), rfi(51), rxjabber(52), sfpmismatch(53), sfpremoved(54), sfptxfault(55), sfpinserted(56), fan-a(57), fan-b(58), overtemp(59), undertemp(60), overvoltage(61), undervoltage(62), shelfrmvd(63), rmtefmlpbkfail(64), inpwrflt(65), crossconnectccm(66), erroneousccm(67), someremotemepccm(68), somemacstatus(69), somerdi(70), ais(71), syncref(72), esmcfail(73), qlmismatch(74), freqoff(75), los(76), lof(77), qlsqlch(78), frngsync(79), fstsync(80), hldovrsync(81), losloc(82), wtr(83), allsyncref(84), qlinvalid(85), snmpdghostunresolved(86), snmpdghostresourcesbusy(87), bwexceedednegspeed(88), shaperbtd(89), sfpnonqualified(90), avghldovrfrqnotrdy(91), lnkdownmasterslavecfg(92), pwrnoinputunitfault(93), ipaddrconflict(94), nomoreresources(95), syncreflck(96), syncreffrc(97), syncrefman(98), syncrefwtr(99), syncrefsw(100), lcpfail(101), lcploopback(102), authservernotreachable(103), excessiveinterrupts(104), dbdowngradeip(105), testalarm(106), gen-filexfer-ip(107), gen-filexfer-fail(108), gen-filexfer-pass(109), gen-oper-ip(110), gen-oper-fail(111), gen-oper-pass(112), trafficfail(113), clockfail(114), rdncyswitchover(115), rdncyswvermismatch(116), rdncyoutofsync(117), rdncylockout(118), rdncymaintenance(119), xfptxfault(120), xfpmismatch(121), xfpnonqualified(122), xfpremoved(123), xfpinserted(124), lagmbrfail(125), swdl-proip(126), swdl-propass(127), swdl-profail(128), db-proip(129), db-propass(130), db-profail(131), swdl-rvtip(132), swdl-rvtpass(133), swdl-rvtfail(134), db-corruption(135), bpmismatch(136), popr-oovar(137), popr-oorange(138), popr-genfail(139), popr-sfpnqual(140), popr-rta(141), modemmea(142), modemnonqualified(143), modemremoved(144), nosimcard(145), env-genfail(146), env-misc(147), env-batterydischarge(148), env-batteryfail(149), env-coolingfanfail(150), env-enginefail(151), env-fusefail(152), env-hightemp(153), env-intrusion(154), env-lowbatteryvoltage(155), env-lowtemp(156), env-opendoor(157), env-powerfail(158), intctneqpt(159), syncnotready(160), vcgfail(161), loa(162), plct(163), tlct(164), plcr(165), tlcr(166), sqnc(167), ais-l(168), rfi-l(169), rei-l(170), exc-l(171), deg-l(172), tim-s(173), ais-p(174), lop-p(175), tim-p(176), uneq-p(177), plm-p(178), lom-p(179), exc-p(180), deg-p(181), rei-p(182), rfi-p(183), lcascrc(184), sqm(185), lom(186), gidmismatch(187), mnd(188), ais-v(189), lop-v(190), tim-v(191), uneq-v(192), plm-v(193), exc-v(194), deg-v(195), rei-v(196), rfi-v(197), rmtinitlpbk(198), rai(199), rei(200), idle(201), csf(202), gfplfd(203), gfpuplmismatch(204), gfpexhmismatch(205), vcat-lom(206), fragileecc(207), elmi-seqnummismatch(208), elmi-notoper(209), pw-rlofs(210), pw-lof(211), pw-latefrm(212), pw-jbovrn(213), allsoocsfailed(214), tsholdoverfrqnotready(215), tsfreerun(216), tsholdover(217), ptsflossofsync(218), ptsflossofannounce(219), ptsfunusable(220), unresolvedsatop(221), rdi-v(222), autonegBypass(223), forcedOffline(224), hwcfginconsistent(225), sjmtiemaskcross(226), sjoffsetfail(227), sjnotimelock(228), sjnofreqlock(229), sjmtiemargincross(230), sjtestreferencefail(231), sjtestsourcefail(232), sjtestnotimestamp(233), sjtestnomessages(234), gpsantennafail(235), ampNoPeer(236), ampProvFail(237), ampCfgFail(238), ltpFailure(239), ltpInprogress(240), pse-power-threshold-exceeded(241), pse-power-fail(242), pse-poweroff-overcurrent(243), pse-poweroff-overvoltage(244), pse-poweroff-overload(245), pse-poweroff-overtemp(246), pse-poweroff-short(247), erpFoPPM(248), erpFoPTO(249), erpBlockPort0RPL(250), erpBlockPort0SF(251), erpBlockPort0MS(252), erpBlockPort0FS(253), erpBlockPort0WTR(254), erpBlockPort1RPL(255), erpBlockPort1SF(256), erpBlockPort1MS(257), erpBlockPort1FS(258), erpBlockPort1WTR(259), ipv6addr-conflict(260), macAddrlearntblFull(261), timeClockNotLocked(262), timeNotTraceAble(263), timeFreqNotTraceAble(264), timeHoldOver(265), timeFreqLock(266), timeRefLock(267), timeRefUnavailable(268), timeRefDegraded(269), timeRefFrc(270), tsTimeFrun(271), tsTimeHoldOver(272), timeRefUnavailableWTR(273), timeRefDegradedWTR(274), rmtInitSat(275), lldpRemoteTblChg(276), soocLck(277), ampProvSuccess(278), ampCfgSuccess(279), soocSW(280), soocWTR(281), sjtealert(282), dataExportFtpFail(283), xfpWaveLengthMismatch(284), cpmrUpgrading(285), beaconLightFailure(286), manualSwitchClear(287), loopbackActive(288), loopbackRequest(289), trafficResourceLimitExceeded(290), oduAis(291), opuAis(292), otuAis(293), otnProtMsmtch(294), otnProtPrtclFail(295), oduBdi(296), otuBdi(297), lossCharSync(298), berHigh(299), laserFail(300), laserCurrentAbnormal(301), oduLock(302), autoShutdown(303), localFault(304), otuLof(305), otuLom(306), oduOci(307), opuPlm(308), oduSd(309), otuSd(310), opuSf(311), optPowerHighRx(312), optPowerLowRx(313), optPowerHighTx(314), optPowerLowTx(315), oduTim(316), otuTim(317), sjConstTeThrshld(318), sjInstTeThrshld(319), timeRefSW(320), aadcfailed(321), ptpfreqfrun(322), ptptimefrun(323), ptpfreqhldovr(324), ptptimehldovr(325), ptptimenottraceable(326), ptpfreqnottraceable(327), synctimeout(328), announcetimeout(329), delayresptimeout(330), multiplepeers(331), wrongdomain(332), nosatellitercv(333), trafficipifoutage(334), ptpportstatechanged(335), physicalSelfLpbk(336), cfCardRWFail(337), maxexpectedslaves(338), external-alarm(339), maskcrossed(340), oof(341), signalfail(342), timenottai(343), perffuncfailure(344), ptpportnotoper(345), leapsecondexpected(346), keyExchangeFail(347), keyExchangeAuthPasswordMissing(348), secureRamCleared(349), noRouteResources(350), tamperSwitchOpen(351), bfdSessionDown(352), destinationUnresolved(353), sjmaxtethrshld(354), trafficArpTableFull(355), erpRingSegmentation(356), bweexceedsportspeed(362), servicediscarded(363)  

CmConditionDescr  
A detailed text description of the condition or alarm being reported. This string may contain any printable ASCII character.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..64)  

CmAlarmEntityType  
Identifies the type of alarm entity types.
TEXTUAL-CONVENTION    
  INTEGER system(1), hubshelf(2), cpmrshelf(3), eth-10-100-1000-ntucard(4), eth-cpmr-card(5), nemi-card(6), scu-card(7), fan(8), powersupply(9), accessport(10), networkport(11), oneru-ge101-shelf(12), oneru-ge206-shelf(13), eth-ge-101-card(14), eth-ge-206-card(15), cfmmep(16), sync(17), bitsinport(18), bitsoutport(19), cfmqosshaper(20), dcnport(21), oneru-ge201-shelf(22), eth-ge-201-card(23), oneru-ge201se-shelf(24), eth-ge-201se-card(25), oneru-ge206f-shelf(26), eth-ge-206f-card(27), lag(28), eth-1-10gcard(29), redundancygroup(30), protectiongroup(31), stucard(32), ethertrafficport(33), eth-10-gecard(34), swf-140gcard(35), aggregationshelf(36), sticard(37), amicard(38), usb3gmodem(39), oneru-ge112-shelf(40), eth-ge-112-card(41), oneru-ge114-shelf(42), eth-ge-114-card(43), oneru-ge206v-shelf(44), eth-ge-206v-card(45), ge-4e-cc(46), ge-4s-cc(47), oneru-xg210-shelf(48), eth-xg-210-card(49), xg-1x-cc(50), xg-1s-cc(51), scu-t-card(52), eth-10-100-1000-ntecard(53), slot(54), ocnstmport(55), e1t1port(56), stsvcpath(57), vtvcpath(58), vcg(59), e3t3port(60), vc4(61), vc3(62), vc12(63), sts3c(64), sts1(65), vt15(66), t3(67), e3(68), t1(69), e1(70), stm1-4-et(71), eotdmtrafficport(72), pwe3-ocnstm-card(73), pwe3-e1t1-card(74), satop(75), telecom-slave(76), sooc(77), eth-1-10ghcard(78), eth-10-gehcard(79), port-10mhz(80), ppsport(81), timeofdayport(82), oneru-t1804-shelf(83), eth-t1804-card(84), oneru-t3204-shelf(85), eth-t3204-card(86), eotdmnetworkport(87), oneru-syncprobe-shelf(88), eth-ge-syncprobe-card(89), sj-clockprobe(90), sj-ptpclockprobe(91), sj-ptpnetworkprobe(92), gps-receiverport(93), ampConfig(94), ge-8s-cc(95), oneru-ge114h-shelf(96), eth-ge-114h-card(97), oneru-ge114ph-shelf(98), eth-ge-114ph-card(99), psegroup(100), pseport(101), erpGroup(102), eth-fe-36e-card(103), mpflow(104), oneru-ge114sh-shelf(105), eth-ge-114sh-card(106), oneru-ge114s-shelf(107), eth-ge-114s-card(108), timeclock(109), satResponderSession(110), stu-h-card(111), sti-h-card(112), ge-8e-cc(113), oneru-otn210-shelf(114), eth-otn-210-card(115), ptpclock(116), ptpport(117), oneru-osa5411-shelf(118), eth-osa5411-card(119), oneru-ge112pro-shelf(120), eth-ge-112pro-card(121), oneru-ge112pro-m-shelf(122), eth-ge-112pro-m-card(123), oneru-ge114pro-shelf(124), eth-ge-114pro-card(125), oneru-ge114pro-c-shelf(126), eth-ge-114pro-c-card(127), oneru-ge114pro-sh-shelf(128), eth-ge-114pro-sh-card(129), oneru-ge114pro-csh-shelf(130), eth-ge-114pro-csh-card(131), connectGuardFlow(132), trafficIpIF(133), vrf(134), oneru-ge114pro-he-shelf(135), eth-ge-114pro-he-card(136), oneru-ge112pro-h-shelf(137), eth-ge-112pro-h-card(138), dhcpRelayAgent(139), oneru-xg210c-shelf(140), eth-xg-210c-card(141), ge-8sc-cc(142), oneru-osa5420-shelf(143), eth-osa5420-card(144), oneru-osa5421-shelf(145), eth-osa5421-card(146), mci(147), bits-x16(148), bfdSession(149), eomplsPw(150), oneru-ge114g-shelf(151), eth-ge-114g-card(152), wifidongleport(153), oneru-xg116pro-shelf(161), eth-xg-116pro-card(162), oneru-xg120pro-shelf(163), eth-xg-120pro-card(164)  

CmCondEffectType  
Identifies the type of condition effect types.
TEXTUAL-CONVENTION    
  INTEGER sc(1), tc(2), cl(3)  

TestAlarmAction  
Whether to raise/clear a test alarm.
TEXTUAL-CONVENTION    
  INTEGER not-applicable(0), raise(1), clear(2)  

EnvAlarmInputMode  
Identifies the environmental alarm input modes.
TEXTUAL-CONVENTION    
  INTEGER disabled(1), alarmopen(2), alarmclosed(3)  

CmSysAlmEntry  
SEQUENCE    
  cmSysAlmNotifCode TrapAlarmSeverity
  cmSysAlmType CmConditionType
  cmSysAlmSrvEff CmServiceEffect
  cmSysAlmTime DateAndTime
  cmSysAlmLocation CmLocation
  cmSysAlmDirection CmDirection
  cmSysAlmDescr CmConditionDescr
  cmSysAlmObject VariablePointer
  cmSysAlmObjectName DisplayString
  cmSysAlmAdditionalInfoObject VariablePointer
  cmSysAlmAdditionalInfoName DisplayString

CmSysCondEntry  
SEQUENCE    
  cmSysCondIndex Integer32
  cmSysCondNotifCode TrapAlarmSeverity
  cmSysCondType CmConditionType
  cmSysCondSrvEff CmServiceEffect
  cmSysCondTime DateAndTime
  cmSysCondLocation CmLocation
  cmSysCondDirection CmDirection
  cmSysCondDescr CmConditionDescr
  cmSysCondEffType CmCondEffectType
  cmSysCondObject VariablePointer
  cmSysCondObjectName DisplayString
  cmSysCondAdditionalInfoObject VariablePointer
  cmSysCondAdditionalInfoName DisplayString

CmNetworkElementAlmEntry  
SEQUENCE    
  cmNetworkElementAlmNotifCode TrapAlarmSeverity
  cmNetworkElementAlmType CmConditionType
  cmNetworkElementAlmSrvEff CmServiceEffect
  cmNetworkElementAlmTime DateAndTime
  cmNetworkElementAlmLocation CmLocation
  cmNetworkElementAlmDirection CmDirection
  cmNetworkElementAlmDescr CmConditionDescr
  cmNetworkElementAlmObject VariablePointer
  cmNetworkElementAlmObjectName DisplayString
  cmNetworkElementAlmAdditionalInfoObject VariablePointer
  cmNetworkElementAlmAdditionalInfoName DisplayString

CmNetworkElementCondEntry  
SEQUENCE    
  cmNetworkElementCondIndex Integer32
  cmNetworkElementCondNotifCode TrapAlarmSeverity
  cmNetworkElementCondType CmConditionType
  cmNetworkElementCondSrvEff CmServiceEffect
  cmNetworkElementCondTime DateAndTime
  cmNetworkElementCondLocation CmLocation
  cmNetworkElementCondDirection CmDirection
  cmNetworkElementCondDescr CmConditionDescr
  cmNetworkElementCondObject VariablePointer
  cmNetworkElementCondObjectName DisplayString
  cmNetworkElementCondEffType CmCondEffectType
  cmNetworkElementCondAdditionalInfoObject VariablePointer
  cmNetworkElementCondAdditionalInfoName DisplayString

CmAlarmSeverityAssignmentEntry  
SEQUENCE    
  cmAlarmSeverityAssignmentEntityType CmAlarmEntityType
  cmAlarmSeverityAssignmentCondType CmConditionType
  cmAlarmSeverityAssignmentSrvEff CmServiceEffect
  cmAlarmSeverityAssignmentLocation CmLocation
  cmAlarmSeverityAssignmentNotifCode TrapAlarmSeverity
  cmAlarmSeverityAssignmentDirection CmDirection

F3EnvAlarmInputEntry  
SEQUENCE    
  f3EnvAlarmInputIndex Integer32
  f3EnvAlarmInputDescr DisplayString
  f3EnvAlarmInputCondType CmConditionType
  f3EnvAlarmInputNotifCode TrapAlarmSeverity
  f3EnvAlarmInputMode EnvAlarmInputMode
  f3EnvAlarmInputAlmHoldOffEnabled TruthValue

Defined Values

cmAlarmMIB 1.3.6.1.4.1.2544.1.12.6
This module defines the Alarm Monitoring MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY    

alarmObjects 1.3.6.1.4.1.2544.1.12.6.1
OBJECT IDENTIFIER    

alarmNotifications 1.3.6.1.4.1.2544.1.12.6.2
OBJECT IDENTIFIER    

alarmConformance 1.3.6.1.4.1.2544.1.12.6.3
OBJECT IDENTIFIER    

cmAlarmScalars 1.3.6.1.4.1.2544.1.12.6.1.1
OBJECT IDENTIFIER    

cmAlmLastChange 1.3.6.1.4.1.2544.1.12.6.1.1.1
A snapshot of the value of sysUpTime when the alarm situation last changed on the node (ie. there was a raise or clear). This value is reset to zero when the agent initializes.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cmAlmIndex 1.3.6.1.4.1.2544.1.12.6.1.1.2
This value is assigned globally and sequentially to each new trap that is sent from the device. When this value reaches a maximum of 65535, it is wrapped to the value 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

cmAlmTestAlarmEntity 1.3.6.1.4.1.2544.1.12.6.1.1.3
This object is used to specify the entity for which the test alarm is raised/cleared. This entity can be OID of a card(unit) or a port (Ethernet Access or Ethernet Network). The test alarm is the trap cmNetworkElementAlmTrap with condition type as testalarm. If not specified, the value of this object is 0.0.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

cmAlmTestAlarmAction 1.3.6.1.4.1.2544.1.12.6.1.1.4
This object can be used to raise/clear the testalarm on the entity specified by cmAlmTestAlarmEntity.
Status: current Access: read-write
OBJECT-TYPE    
  TestAlarmAction  

cmSysAlmTable 1.3.6.1.4.1.2544.1.12.6.1.2
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmSysAlmEntry

cmSysAlmEntry 1.3.6.1.4.1.2544.1.12.6.1.2.1
An entry containing information applicable to a particular condition.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmSysAlmEntry  

cmSysAlmNotifCode 1.3.6.1.4.1.2544.1.12.6.1.2.1.1
This object identifies the severity of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  TrapAlarmSeverity  

cmSysAlmType 1.3.6.1.4.1.2544.1.12.6.1.2.1.2
This object identifies the type of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionType  

cmSysAlmSrvEff 1.3.6.1.4.1.2544.1.12.6.1.2.1.3
This object identifies whether the condition is service affecting or not.
Status: current Access: read-only
OBJECT-TYPE    
  CmServiceEffect  

cmSysAlmTime 1.3.6.1.4.1.2544.1.12.6.1.2.1.4
This object contains the system time when the condition occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

cmSysAlmLocation 1.3.6.1.4.1.2544.1.12.6.1.2.1.5
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmLocation  

cmSysAlmDirection 1.3.6.1.4.1.2544.1.12.6.1.2.1.6
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmDirection  

cmSysAlmDescr 1.3.6.1.4.1.2544.1.12.6.1.2.1.7
This object contains a text description of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionDescr  

cmSysAlmObject 1.3.6.1.4.1.2544.1.12.6.1.2.1.8
OID of the actual object that raised the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmSysAlmObjectName 1.3.6.1.4.1.2544.1.12.6.1.2.1.9
Symbolic name of the managed object to which the condition pertains.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cmSysAlmAdditionalInfoObject 1.3.6.1.4.1.2544.1.12.6.1.2.1.10
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmSysAlmAdditionalInfoName 1.3.6.1.4.1.2544.1.12.6.1.2.1.11
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

cmSysCondTable 1.3.6.1.4.1.2544.1.12.6.1.3
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmSysCondEntry

cmSysCondEntry 1.3.6.1.4.1.2544.1.12.6.1.3.1
An entry containing information applicable to a particular condition.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmSysCondEntry  

cmSysCondIndex 1.3.6.1.4.1.2544.1.12.6.1.3.1.1
An integer index value used to uniquely identify a standing condition at the system level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

cmSysCondNotifCode 1.3.6.1.4.1.2544.1.12.6.1.3.1.2
This object identifies the severity of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  TrapAlarmSeverity  

cmSysCondType 1.3.6.1.4.1.2544.1.12.6.1.3.1.3
This object identifies the type of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionType  

cmSysCondSrvEff 1.3.6.1.4.1.2544.1.12.6.1.3.1.4
This object identifies whether the condition is service affecting or not.
Status: current Access: read-only
OBJECT-TYPE    
  CmServiceEffect  

cmSysCondTime 1.3.6.1.4.1.2544.1.12.6.1.3.1.5
This object contains the system time when the condition occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

cmSysCondLocation 1.3.6.1.4.1.2544.1.12.6.1.3.1.6
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmLocation  

cmSysCondDirection 1.3.6.1.4.1.2544.1.12.6.1.3.1.7
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmDirection  

cmSysCondDescr 1.3.6.1.4.1.2544.1.12.6.1.3.1.8
This object contains a text description of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionDescr  

cmSysCondEffType 1.3.6.1.4.1.2544.1.12.6.1.3.1.9
This object contains the condition effect type.
Status: current Access: read-only
OBJECT-TYPE    
  CmCondEffectType  

cmSysCondObject 1.3.6.1.4.1.2544.1.12.6.1.3.1.10
OID of the actual object that raised the condition.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmSysCondObjectName 1.3.6.1.4.1.2544.1.12.6.1.3.1.11
Symbolic name of the managed object to which the condition pertains.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cmSysCondAdditionalInfoObject 1.3.6.1.4.1.2544.1.12.6.1.3.1.12
This object provides OID of associated entity that caused the condition. If there is no associated entity, this value is 0.0.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmSysCondAdditionalInfoName 1.3.6.1.4.1.2544.1.12.6.1.3.1.13
This object provides name of the associated entity to which the condition pertains. If there is no such entity, this value is empty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

cmNetworkElementAlmTable 1.3.6.1.4.1.2544.1.12.6.1.4
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmNetworkElementAlmEntry

cmNetworkElementAlmEntry 1.3.6.1.4.1.2544.1.12.6.1.4.1
An entry containing information applicable to a particular condition.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmNetworkElementAlmEntry  

cmNetworkElementAlmNotifCode 1.3.6.1.4.1.2544.1.12.6.1.4.1.1
This object identifies the severity of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  TrapAlarmSeverity  

cmNetworkElementAlmType 1.3.6.1.4.1.2544.1.12.6.1.4.1.2
This object identifies the type of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionType  

cmNetworkElementAlmSrvEff 1.3.6.1.4.1.2544.1.12.6.1.4.1.3
This object identifies whether the condition is service affecting or not.
Status: current Access: read-only
OBJECT-TYPE    
  CmServiceEffect  

cmNetworkElementAlmTime 1.3.6.1.4.1.2544.1.12.6.1.4.1.4
This object contains the system time when the condition occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

cmNetworkElementAlmLocation 1.3.6.1.4.1.2544.1.12.6.1.4.1.5
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmLocation  

cmNetworkElementAlmDirection 1.3.6.1.4.1.2544.1.12.6.1.4.1.6
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmDirection  

cmNetworkElementAlmDescr 1.3.6.1.4.1.2544.1.12.6.1.4.1.7
This object contains a text description of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionDescr  

cmNetworkElementAlmObject 1.3.6.1.4.1.2544.1.12.6.1.4.1.8
OID of the actual object that raised the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmNetworkElementAlmObjectName 1.3.6.1.4.1.2544.1.12.6.1.4.1.9
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cmNetworkElementAlmAdditionalInfoObject 1.3.6.1.4.1.2544.1.12.6.1.4.1.10
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmNetworkElementAlmAdditionalInfoName 1.3.6.1.4.1.2544.1.12.6.1.4.1.11
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

cmNetworkElementCondTable 1.3.6.1.4.1.2544.1.12.6.1.5
A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmNetworkElementCondEntry

cmNetworkElementCondEntry 1.3.6.1.4.1.2544.1.12.6.1.5.1
An entry containing information applicable to a particular condition.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmNetworkElementCondEntry  

cmNetworkElementCondIndex 1.3.6.1.4.1.2544.1.12.6.1.5.1.1
An integer index value used to uniquely identify a standing condition at a Network Element level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

cmNetworkElementCondNotifCode 1.3.6.1.4.1.2544.1.12.6.1.5.1.2
This object identifies the severity of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  TrapAlarmSeverity  

cmNetworkElementCondType 1.3.6.1.4.1.2544.1.12.6.1.5.1.3
This object identifies the type of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionType  

cmNetworkElementCondSrvEff 1.3.6.1.4.1.2544.1.12.6.1.5.1.4
This object identifies whether the condition is service affecting or not.
Status: current Access: read-only
OBJECT-TYPE    
  CmServiceEffect  

cmNetworkElementCondTime 1.3.6.1.4.1.2544.1.12.6.1.5.1.5
This object contains the system time when the condition occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

cmNetworkElementCondLocation 1.3.6.1.4.1.2544.1.12.6.1.5.1.6
This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmLocation  

cmNetworkElementCondDirection 1.3.6.1.4.1.2544.1.12.6.1.5.1.7
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmDirection  

cmNetworkElementCondDescr 1.3.6.1.4.1.2544.1.12.6.1.5.1.8
This object contains a text description of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionDescr  

cmNetworkElementCondObject 1.3.6.1.4.1.2544.1.12.6.1.5.1.9
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmNetworkElementCondObjectName 1.3.6.1.4.1.2544.1.12.6.1.5.1.10
Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cmNetworkElementCondEffType 1.3.6.1.4.1.2544.1.12.6.1.5.1.11
This object contains the condition effect type.
Status: current Access: read-only
OBJECT-TYPE    
  CmCondEffectType  

cmNetworkElementCondAdditionalInfoObject 1.3.6.1.4.1.2544.1.12.6.1.5.1.12
This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

cmNetworkElementCondAdditionalInfoName 1.3.6.1.4.1.2544.1.12.6.1.5.1.13
This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

cmAlarmSeverityAssignmentTable 1.3.6.1.4.1.2544.1.12.6.1.6
A list of configurable alarm severity assignment entries for Enterprise MIB Alarm Conditions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmAlarmSeverityAssignmentEntry

cmAlarmSeverityAssignmentEntry 1.3.6.1.4.1.2544.1.12.6.1.6.1
A list of parameters that set up the alarm severity assignment profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmAlarmSeverityAssignmentEntry  

cmAlarmSeverityAssignmentEntityType 1.3.6.1.4.1.2544.1.12.6.1.6.1.1
Alarm Severity Assignment Entity Type.
Status: current Access: read-only
OBJECT-TYPE    
  CmAlarmEntityType  

cmAlarmSeverityAssignmentCondType 1.3.6.1.4.1.2544.1.12.6.1.6.1.2
This object identifies the type of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  CmConditionType  

cmAlarmSeverityAssignmentSrvEff 1.3.6.1.4.1.2544.1.12.6.1.6.1.3
This object identifies whether the condition is service affecting or not.
Status: current Access: read-only
OBJECT-TYPE    
  CmServiceEffect  

cmAlarmSeverityAssignmentLocation 1.3.6.1.4.1.2544.1.12.6.1.6.1.4
This object identifies the location of the condition. The value none(0) is used if location is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmLocation  

cmAlarmSeverityAssignmentNotifCode 1.3.6.1.4.1.2544.1.12.6.1.6.1.5
This object allows configuration of the severity of the condition.
Status: current Access: read-write
OBJECT-TYPE    
  TrapAlarmSeverity  

cmAlarmSeverityAssignmentDirection 1.3.6.1.4.1.2544.1.12.6.1.6.1.6
This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  CmDirection  

f3EnvAlarmInputTable 1.3.6.1.4.1.2544.1.12.6.1.7
A list of configurable Environmental Alarm Inputs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EnvAlarmInputEntry

f3EnvAlarmInputEntry 1.3.6.1.4.1.2544.1.12.6.1.7.1
A list of parameters to manage the the environmental alarm inputs.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EnvAlarmInputEntry  

f3EnvAlarmInputIndex 1.3.6.1.4.1.2544.1.12.6.1.7.1.1
Unique index for each environmental alarm input.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3EnvAlarmInputDescr 1.3.6.1.4.1.2544.1.12.6.1.7.1.2
This object allows SNMP management entities to provide description to the environmental alarm inputs.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

f3EnvAlarmInputCondType 1.3.6.1.4.1.2544.1.12.6.1.7.1.3
This object allows SNMP management entities to provide the environmental alarm condition associated with the environmental alarm input.
Status: current Access: read-write
OBJECT-TYPE    
  CmConditionType  

f3EnvAlarmInputNotifCode 1.3.6.1.4.1.2544.1.12.6.1.7.1.4
This object allows SNMP management entities to provide the notification code for the environmental alarm input.
Status: current Access: read-write
OBJECT-TYPE    
  TrapAlarmSeverity  

f3EnvAlarmInputMode 1.3.6.1.4.1.2544.1.12.6.1.7.1.5
This object allows specification of the environmental alarm input mode. When 'disabled', environmental alarms are not raised. Value of 'alarmopen' allows alarm to be raised when environmental alarm dry contacts are opened. Value of 'alarmclosed' allows alarm to be raised when environmental alarm dry contacts are closed.
Status: current Access: read-write
OBJECT-TYPE    
  EnvAlarmInputMode  

f3EnvAlarmInputAlmHoldOffEnabled 1.3.6.1.4.1.2544.1.12.6.1.7.1.6
This object allows enabling/disabling of alarm hold off for this environmental alarm. When 'disabled', the standard alarm hold off (2.5seconds) does not hold, i.e. alarms are raised immediately when conditions happen.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cmSysAlmTrap 1.3.6.1.4.1.2544.1.12.6.2.1
This trap is sent each time an alarm condition is raised and inserted into to the cmSysAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmSysAlmTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

cmNetworkElementAlmTrap 1.3.6.1.4.1.2544.1.12.6.2.2
This trap is sent each time an alarm condition is raised and inserted into to the cmNetworkElementAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmNetworkElementAlmTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

cmSysEvent 1.3.6.1.4.1.2544.1.12.6.2.3
This trap is sent each time an event condition is raised and inserted into to the cmSysCondTable. It is also sent each time an event condition is cleared and removed from the cmSysCondTable. Standing conditions/transient conditions are reported using this notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

cmNetworkElementEvent 1.3.6.1.4.1.2544.1.12.6.2.4
This trap is sent each time an event condition is raised and inserted into to the cmNetworkElementCondTable. It is also sent each time an event condition is cleared and removed from the cmNetworkElementCondTable. Standing conditions/transient conditions are reported using this notification.
Status: current Access: read-write
NOTIFICATION-TYPE    

cmAlmCompliances 1.3.6.1.4.1.2544.1.12.6.3.1
OBJECT IDENTIFIER    

cmAlmGroups 1.3.6.1.4.1.2544.1.12.6.3.2
OBJECT IDENTIFIER    

cmAlmCompliance 1.3.6.1.4.1.2544.1.12.6.3.1.1
Describes the requirements for conformance to the Alarm Condition Services.
Status: current Access: read-write
MODULE-COMPLIANCE    

cmAlmObjectGroup 1.3.6.1.4.1.2544.1.12.6.3.2.1
A collection of objects used to manage the Alarm conditions/threshold Services.
Status: current Access: read-write
OBJECT-GROUP    

cmAlmNotifGroup 1.3.6.1.4.1.2544.1.12.6.3.2.2
A collection of notifications related to alarm conditions/threshold Services.
Status: current Access: read-write
NOTIFICATION-GROUP    

f3EnvAlarmInputGroup 1.3.6.1.4.1.2544.1.12.6.3.2.3
A collection of objects related to environmental alarm inputs.
Status: current Access: read-write
OBJECT-GROUP