CISCOSB-UDLD-MIB
File:
CISCOSB-UDLD-MIB.mib (9247 bytes)
Imported modules
Imported symbols
Defined Types
| UdldPortBidirectionalState |
|
| Port UDLD current status (shutdown, idle, detection, undetermined, bidirectional). |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
shutdown(1), idle(2), detection(3), undetermined(4), bidirectional(5) |
|
| UdldNeighborCurrentState |
|
| Port UDLD Neighbor current status (Disabled, Enabled, Undefined, Bidirectional). |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
disabled(1), enabled(2), undefined(3), bidirectional(4) |
|
| UdldGlobalMode |
|
| Global (fiber) Port UDLD curent status (normal, aggressive, disabled). |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
normal(1), aggressive(2), disabled(3) |
|
| UdldPortMode |
|
| Port UDLD curent status (normal, aggressive, disabled, default). |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
normal(1), aggressive(2), disabled(3), default(4) |
|
| RlUdldPortEntry |
|
| SEQUENCE |
|
|
|
| |
rlUdldPortIfIndex |
InterfaceIndex |
|
| |
rlUdldPortAdminMode |
UdldPortMode |
|
| |
rlUdldPortOperMode |
UdldPortMode |
|
| |
rlUdldPortDefaultConfiguration |
TruthValue |
|
| |
rlUdldBidirectionalState |
UdldPortBidirectionalState |
|
| |
rlUdldNumberOfDetectedNeighbors |
INTEGER |
|
| RlUdldNeighborEntry |
|
| SEQUENCE |
|
|
|
| |
rlUdldNeighborPortIfIndex |
InterfaceIndex |
|
| |
rlUdldNeighborDeviceID |
UdldString |
|
| |
rlUdldNeighborPortID |
UdldString |
|
| |
rlUdldNeighborDeviceMACAddress |
MacAddress |
|
| |
rlUdldNeighborDeviceName |
UdldString |
|
| |
rlUdldNeighborMessageTime |
INTEGER |
|
| |
rlUdldNeighborLeftLifeTime |
INTEGER |
|
| |
rlUdldNeighborCurrentState |
UdldNeighborCurrentState |
|
Defined Values
| rlUdld |
1.3.6.1.4.1.9.6.1.101.218 |
| This private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol). |
| MODULE-IDENTITY |
|
|
|
| rlUdldPortTable |
1.3.6.1.4.1.9.6.1.101.218.1 |
| The table holds information for Udld Ethernet ports. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
RlUdldPortEntry |
|
| rlUdldPortEntry |
1.3.6.1.4.1.9.6.1.101.218.1.1 |
| Entry in the rlUdldPortTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
RlUdldPortEntry |
|
|
| rlUdldPortIfIndex |
1.3.6.1.4.1.9.6.1.101.218.1.1.1 |
| Interface Index. This variable is the key for udld port table.
uniquely identifies the udld port information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
|
|
| rlUdldPortAdminMode |
1.3.6.1.4.1.9.6.1.101.218.1.1.2 |
| This variable identifies port UDLD admin configured mode (normal, aggressive, disable). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
UdldPortMode |
|
|
| rlUdldPortOperMode |
1.3.6.1.4.1.9.6.1.101.218.1.1.3 |
| This variable identifies port UDLD operational mode (normal, aggressive, disable).
for fiber ports it is combination of global mode and port mode |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UdldPortMode |
|
|
| rlUdldPortDefaultConfiguration |
1.3.6.1.4.1.9.6.1.101.218.1.1.4 |
| This variable indicates whether tne user configure the udld port. to present (default) or not in port configuration. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| rlUdldNumberOfDetectedNeighbors |
1.3.6.1.4.1.9.6.1.101.218.1.1.6 |
| Number Of Detected Neighbors for this port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rlUdldNeighborTable |
1.3.6.1.4.1.9.6.1.101.218.2 |
| The table holds information for Udld Neighbor of ethernet ports. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
RlUdldNeighborEntry |
|
| rlUdldNeighborEntry |
1.3.6.1.4.1.9.6.1.101.218.2.1 |
| Entry in the rlUdldNeighborTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
RlUdldNeighborEntry |
|
|
| rlUdldNeighborPortIfIndex |
1.3.6.1.4.1.9.6.1.101.218.2.1.1 |
| Interface Index. This variable is the key for udld port Neighbor table.
uniquely identifies the udld port index. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
|
|
| rlUdldNeighborDeviceID |
1.3.6.1.4.1.9.6.1.101.218.2.1.2 |
| The Neighbor Device-ID TLV should contain the switch base MAC address in ACSII format. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UdldString |
|
|
| rlUdldNeighborPortID |
1.3.6.1.4.1.9.6.1.101.218.2.1.3 |
| The Port-ID TLV should contain the port ACSII name as it is printed in show CLI commands. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UdldString |
|
|
| rlUdldNeighborDeviceName |
1.3.6.1.4.1.9.6.1.101.218.2.1.5 |
| The Neighbor NeighborDevice Name TLV should contain sysName in ACSII. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
UdldString |
|
|
| rlUdldNeighborMessageTime |
1.3.6.1.4.1.9.6.1.101.218.2.1.6 |
| The Neighbor Message Time is from Message Interval TLV.
This time interval value used by a neighbor to send UDLD probes
after the linkup or detection phases. Its time unit is 1 second. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rlUdldNeighborLeftLifeTime |
1.3.6.1.4.1.9.6.1.101.218.2.1.7 |
| The remaining holdtime for Neighbor entry in cache in seconds. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| rlUdldGlobalMessageTime |
1.3.6.1.4.1.9.6.1.101.218.4 |
| Define global value of the interval between two sent probe messages, use the udld
message time command in Global Configuration mode. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|