CISCOSB-EEE-MIB

File: CISCOSB-EEE-MIB.mib (10175 bytes)

Imported modules

CISCOSB-MIB SNMPv2-SMI SNMPv2-TC
IF-MIB

Imported symbols

switch001 MODULE-IDENTITY OBJECT-TYPE
Unsigned32 TEXTUAL-CONVENTION TruthValue
ifIndex ifOperStatus

Defined Types

RlEeePortEntry  
SEQUENCE    
  rlEeePortAdminStatus TruthValue
  rlEeePortSupported BITS
  rlEeePortRemoteStatus TruthValue
  rlEeePortOperStatus TruthValue

RlEeePortLldpEntry  
SEQUENCE    
  rlEeePortLldpAdminStatus TruthValue
  rlEeePortLldpOperStatus TruthValue

RlEeePortLocalEntry  
SEQUENCE    
  rlEeePortLldpLocalResolvedTx Unsigned32
  rlEeePortLldpLocalTx Unsigned32
  rlEeePortLldpLocalTxEcho Unsigned32
  rlEeePortLldpLocalResolvedRx Unsigned32
  rlEeePortLldpLocalRx Unsigned32
  rlEeePortLldpLocalRxEcho Unsigned32

RlEeePortRemoteEntry  
SEQUENCE    
  rlEeePortLldpRemoteTx Unsigned32
  rlEeePortLldpRemoteRx Unsigned32
  rlEeePortLldpRemoteTxEcho Unsigned32
  rlEeePortLldpRemoteRxEcho Unsigned32

Defined Values

rlEee 1.3.6.1.4.1.9.6.1.101.149
The private MIB module definition for Energy Efficient Ethernet feature.
MODULE-IDENTITY    

rlEeeEnable 1.3.6.1.4.1.9.6.1.101.149.1
Enable the EEE mode globally
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlEeePortTable 1.3.6.1.4.1.9.6.1.101.149.2
A table of EEE state of ports
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlEeePortEntry

rlEeePortEntry 1.3.6.1.4.1.9.6.1.101.149.2.1
An entry of EEE state of bridge port
Status: current Access: not-accessible
OBJECT-TYPE    
  RlEeePortEntry  

rlEeePortAdminStatus 1.3.6.1.4.1.9.6.1.101.149.2.1.1
Enable/Disable EEE on ifindex
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlEeePortSupported 1.3.6.1.4.1.9.6.1.101.149.2.1.2
Bit map that indicates whether EEE supported on the phy of the ifindex per speed 0 - speed 10m; 1 - 100m; 2 - 1g; 3 - 10g
Status: current Access: read-only
OBJECT-TYPE    
  BITS rlEeePortSupported10M(0), rlEeePortSupported100M(1), rlEeePortSupported1G(2), rlEeePortSupported10G(3)  

rlEeePortRemoteStatus 1.3.6.1.4.1.9.6.1.101.149.2.1.3
Indicates whether EEE active on remote link on current port's speed
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlEeePortOperStatus 1.3.6.1.4.1.9.6.1.101.149.2.1.4
Indicates whether EEE active on ifindex - ifoper is up, rlEeePortSupported BIT is on in current port speed rlEeePortLldpRemoteStatus is true, rlEeeEnable is true, rlEeePortAdminStatus is true
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlEeePortLldpTable 1.3.6.1.4.1.9.6.1.101.149.3
A table of EEE LLDP
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlEeePortLldpEntry

rlEeePortLldpEntry 1.3.6.1.4.1.9.6.1.101.149.3.1
An entry of EEE LLDP
Status: current Access: not-accessible
OBJECT-TYPE    
  RlEeePortLldpEntry  

rlEeePortLldpAdminStatus 1.3.6.1.4.1.9.6.1.101.149.3.1.1
Enable/Disable EEE LLDP on ifindex
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rlEeePortLldpOperStatus 1.3.6.1.4.1.9.6.1.101.149.3.1.2
Indicates whether EEE LLDP active on ifindex - rlEeePortLldpAdminStatus is true lldpPortConfigAdminStatus is txAndRx, rlLldpEnabled is true, recieve a synch lldp packet
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rlEeePortLldpLocalTable 1.3.6.1.4.1.9.6.1.101.149.4
A table of EEE Local ports
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlEeePortLocalEntry

rlEeePortLldpLocalEntry 1.3.6.1.4.1.9.6.1.101.149.4.1
An entry of EEE Local port
Status: current Access: not-accessible
OBJECT-TYPE    
  RlEeePortLocalEntry  

rlEeePortLldpLocalResolvedTx 1.3.6.1.4.1.9.6.1.101.149.4.1.1
Indicates the current Tw_sys_tx configured in the local system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpLocalTx 1.3.6.1.4.1.9.6.1.101.149.4.1.2
Indicates the value of Tw_sys_tx that the local system can support, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpLocalTxEcho 1.3.6.1.4.1.9.6.1.101.149.4.1.3
Indicates the remote system's Transmit Tw_sys_tx that was used by the local system to compute the Tw_sys_tx that it wants to request from the remote system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpLocalResolvedRx 1.3.6.1.4.1.9.6.1.101.149.4.1.4
Indicates the current Tw_sys_tx configured by the remote system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpLocalRx 1.3.6.1.4.1.9.6.1.101.149.4.1.5
Indicates the value of Tw_sys_tx that the local system requests from the remote system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpLocalRxEcho 1.3.6.1.4.1.9.6.1.101.149.4.1.6
Indicates the remote system Receive Tw_sys_tx that was used by the local system to compute the Tw_sys_tx that it can support, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpRemoteTable 1.3.6.1.4.1.9.6.1.101.149.5
A table of EEE remote ports
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RlEeePortRemoteEntry

rlEeePortLldpRemoteEntry 1.3.6.1.4.1.9.6.1.101.149.5.1
An entry of EEE remote port
Status: current Access: not-accessible
OBJECT-TYPE    
  RlEeePortRemoteEntry  

rlEeePortLldpRemoteTx 1.3.6.1.4.1.9.6.1.101.149.5.1.1
Indicates the value of Tw_sys_tx that the remote system can support, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpRemoteRx 1.3.6.1.4.1.9.6.1.101.149.5.1.2
Indicates the value of Tw_sys_tx that the remote system requests from the local system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpRemoteTxEcho 1.3.6.1.4.1.9.6.1.101.149.5.1.3
Indicates the value of transmit Tw_sys_tx echoed back by the remote system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

rlEeePortLldpRemoteRxEcho 1.3.6.1.4.1.9.6.1.101.149.5.1.4
Indicates the value Receive Tw_sys_tx echoed back by the remote system, in micro-seconds
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32