CISCOSB-DHCPCL-MIB

File: CISCOSB-DHCPCL-MIB.mib (27690 bytes)

Imported modules

CISCOSB-MIB SNMPv2-SMI SNMPv2-TC
IF-MIB SNMP-FRAMEWORK-MIB INET-ADDRESS-MIB

Imported symbols

switch001 OBJECT-TYPE MODULE-IDENTITY
IpAddress Unsigned32 TruthValue
RowStatus DisplayString InterfaceIndex
ifIndex SnmpAdminString InetAddressType
InetAddress

Defined Types

RlDhcpClActionEntry  
SEQUENCE    
  rlDhcpClActionIfIndex InterfaceIndex
  rlDhcpClActionStatus RowStatus
  rlDhcpClActionHostName SnmpAdminString

RlDhcpApprovalWaitingEntry  
SEQUENCE    
  rlDhcpApprovalWaitingIfIndex InterfaceIndex
  rlDhcpApprovalWaitingAddress IpAddress
  rlDhcpApprovalWaitingMask IpAddress
  rlDhcpApprovalWaitingGateway IpAddress

RlDhcpApprovalActionEntry  
SEQUENCE    
  rlDhcpApprovalActionIfIndex InterfaceIndex
  rlDhcpApprovalActionAddress IpAddress
  rlDhcpApprovalActionMask IpAddress
  rlDhcpApprovalActionApprove TruthValue

RlDhcpClCommandEntry  
SEQUENCE    
  rlDhcpClCommandAction INTEGER

RlDhcpClManualAutoConfigDataEntry  
SEQUENCE    
  rlDhcpClManualAutoConfigDataIndex INTEGER
  rlDhcpClManualServerInetAddressType InetAddressType
  rlDhcpClManualServerInetAddress InetAddress
  rlDhcpClManualImageIndirectFileName DisplayString

RlDhcpClInformationEntry  
SEQUENCE    
  rlDhcpClInformationIfIndex InterfaceIndex
  rlDhcpClInformationIpAddress IpAddress
  rlDhcpClInformationIpMask IpAddress
  rlDhcpClInformationT1 Unsigned32
  rlDhcpClInformationT2 Unsigned32
  rlDhcpClInformationDefaultGateway IpAddress
  rlDhcpClInformationHostName SnmpAdminString
  rlDhcpClInformationDomainName DisplayString
  rlDhcpClInformationTftpServerName DisplayString
  rlDhcpClInformationTftpFileName DisplayString
  rlDhcpClInformationTimeZone DisplayString
  rlDhcpClInformationTftpImageName DisplayString

RlDhcpClInformationDnsServerListEntry  
SEQUENCE    
  rlDhcpClInformationDnsServerListIfIndex InterfaceIndex
  rlDhcpClInformationDnsServerListPriority INTEGER
  rlDhcpClInformationDnsServerListAddress IpAddress

RlDhcpClInformationTftpServerListEntry  
SEQUENCE    
  rlDhcpClInformationTftpServerListIfIndex InterfaceIndex
  rlDhcpClInformationTftpServerListPriority INTEGER
  rlDhcpClInformationTftpServerListAddress IpAddress

Defined Values

rlDhcpCl 1.3.6.1.4.1.9.6.1.101.76
This private MIB module defines DHCP CL private MIBs.
MODULE-IDENTITY    

rlDhcpClActionTable 1.3.6.1.4.1.9.6.1.101.76.3
The (conceptual) table mentione IP address which must be released/renewed on the interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClActionEntry

rlDhcpClActionEntry 1.3.6.1.4.1.9.6.1.101.76.3.1
An entry (conceptual row) in dhcpClActionTable.
OBJECT-TYPE    
  RlDhcpClActionEntry  

rlDhcpClActionIfIndex 1.3.6.1.4.1.9.6.1.101.76.3.1.1
The interface which the action is implemented for or NULL if it implemented for all device.
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpClActionStatus 1.3.6.1.4.1.9.6.1.101.76.3.1.2
The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
OBJECT-TYPE    
  RowStatus  

rlDhcpClActionHostName 1.3.6.1.4.1.9.6.1.101.76.3.1.3
This option specifies the name of the client.
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

rlDhcpApprovalEnabled 1.3.6.1.4.1.9.6.1.101.76.4
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
OBJECT-TYPE    
  TruthValue  

rlDhcpApprovalWaitingTable 1.3.6.1.4.1.9.6.1.101.76.5
IP addresses waiting for approval.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpApprovalWaitingEntry

rlDhcpApprovalWaitingEntry 1.3.6.1.4.1.9.6.1.101.76.5.1
An entry in rlDhcpApprovalWaitingTable.
OBJECT-TYPE    
  RlDhcpApprovalWaitingEntry  

rlDhcpApprovalWaitingIfIndex 1.3.6.1.4.1.9.6.1.101.76.5.1.1
IP interface ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpApprovalWaitingAddress 1.3.6.1.4.1.9.6.1.101.76.5.1.2
IP Address waiting for approval.
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalWaitingMask 1.3.6.1.4.1.9.6.1.101.76.5.1.3
Mask waiting for approval.
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalWaitingGateway 1.3.6.1.4.1.9.6.1.101.76.5.1.4
Default gateway of received address.
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionTable 1.3.6.1.4.1.9.6.1.101.76.6
Action for waiting ip address (approve/decline).
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpApprovalActionEntry

rlDhcpApprovalActionEntry 1.3.6.1.4.1.9.6.1.101.76.6.1
An entry in rlDhcpApprovalActionTable.
OBJECT-TYPE    
  RlDhcpApprovalActionEntry  

rlDhcpApprovalActionIfIndex 1.3.6.1.4.1.9.6.1.101.76.6.1.1
IP interface ifIndex.
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpApprovalActionAddress 1.3.6.1.4.1.9.6.1.101.76.6.1.2
IP Address.
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionMask 1.3.6.1.4.1.9.6.1.101.76.6.1.3
IP Address mask.
OBJECT-TYPE    
  IpAddress  

rlDhcpApprovalActionApprove 1.3.6.1.4.1.9.6.1.101.76.6.1.4
Approve or decline ip address.
OBJECT-TYPE    
  TruthValue  

rlDhcpClCommandTable 1.3.6.1.4.1.9.6.1.101.76.7
Action MIB for DHCP Renew command.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClCommandEntry

rlDhcpClCommandEntry 1.3.6.1.4.1.9.6.1.101.76.7.1
The row definition for this table.
OBJECT-TYPE    
  RlDhcpClCommandEntry  

rlDhcpClCommandAction 1.3.6.1.4.1.9.6.1.101.76.7.1.2
Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false.
OBJECT-TYPE    
  INTEGER none(0), renew(1), renewForceAutoconfig(2)  

rlDhcpClConfigurationFileName 1.3.6.1.4.1.9.6.1.101.76.8
The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
OBJECT-TYPE    
  DisplayString  

rlDhcpClOption67Enable 1.3.6.1.4.1.9.6.1.101.76.9
Defines whether the configuration file can be downloaded from DHCP packet option 67.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rlDhcpClManualTftpServerAddress 1.3.6.1.4.1.9.6.1.101.76.10
Manually configured TFTP server IP Address.
OBJECT-TYPE    
  IpAddress  

rlDhcpClSelectedTftpServerAddress 1.3.6.1.4.1.9.6.1.101.76.11
Currently selected TFTP server IP Address.
OBJECT-TYPE    
  IpAddress  

rlDhcpClSelectedTftpServerAddressOrigin 1.3.6.1.4.1.9.6.1.101.76.12
Currently selected TFTP server IP Address's origin
OBJECT-TYPE    
  INTEGER sname(1), option66(2), option150(3), option129(4), siaddr(5), manual(6), unknown(7), none(8), optionv6-59(9), broadcastReply(10)  

rlDhcpClManualConfigurationFileName 1.3.6.1.4.1.9.6.1.101.76.13
The manually configured file name.
OBJECT-TYPE    
  DisplayString  

rlDhcpClSelectedConfigurationFileName 1.3.6.1.4.1.9.6.1.101.76.14
The selected configuration file name.
OBJECT-TYPE    
  DisplayString  

rlDhcpClSelectedConfigurationFileNameOrigin 1.3.6.1.4.1.9.6.1.101.76.15
The selected configuration files name origin.
OBJECT-TYPE    
  INTEGER file(1), option67(2), manual(3), none(4), hostname(5), defaultConfigFile(6), optionv6-60(7)  

rlDhcpClEnabledByDefaultRemovedIfindex 1.3.6.1.4.1.9.6.1.101.76.16
DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
OBJECT-TYPE    
  INTEGER  

rlDhcpClAutoUpdateEnabled 1.3.6.1.4.1.9.6.1.101.76.17
Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
OBJECT-TYPE    
  TruthValue  

rlDhcpClAutoUpdateStatus 1.3.6.1.4.1.9.6.1.101.76.18
Describes the status of current/last DHCP auto-update process.
OBJECT-TYPE    
  INTEGER noData(1), openingIndirectFile(2), downloadedIndirectFile(3), startDownloadImageFile(4), failedToDownloadImageFile(5), quitFileContentsLenZero(6), quitImageFileNameLenZero(7), quitVersionAlreadyUpdated(8), quitIndirectFileNotFound(9), quitImageFileNotFound(10), quitImageVersionNotSupported(11), quitNoTftpOutgoingInterface(12), quitUsbSetupFileOpenError(13), quitUsbSetupFileFormatError(14), quitUsbSetupFileReadWriteError(15), quitUsbSetupFileSetIpAddrError(16), quitUsbSetupFileImageFileNotExist(17), quitUsbSetupFileConfigFileNotExist(18)  

rlDhcpClAutoConfigForce 1.3.6.1.4.1.9.6.1.101.76.19
Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
OBJECT-TYPE    
  TruthValue  

rlDhcpClAutoConfigAutoSave 1.3.6.1.4.1.9.6.1.101.76.20
Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
OBJECT-TYPE    
  TruthValue  

rlDhcpClAutoConfigStatus 1.3.6.1.4.1.9.6.1.101.76.21
Describes the status of current/last DHCP auto-config process.
OBJECT-TYPE    
  INTEGER noData(1), openingDhcpConfigFile(2), openingIndirectFile(3), searchingHostnameInIndirectFile(4), openingHostnameConfigFile(5), openingHostnameCfgFile(6), openingDefaultConfigFile(7), downloadingConfigFile(8), savingConfigInStartupCDB(9), quitDhcpFileNotGivenOrNotExists(10), quitFailedToFindAnyExistingConfigFile(11), quitConfigFileContentsLenZero(12), quitConfigFileDownloadFailed(13), quitConditionsForAutoConfigChanged(14), quitSelectedConfigFileNameUpdateFailed(15), quitSelectedConfigFileNameOriginUpdateFailed(16), quitSelectedTftpServerAddressUpdateFailed(17), quitSelectedTftpServerAddressOriginUpdateFailed(18), quitCopyRunningToStartupFailed(19), quitNoTftpOutgoingInterface(20), finishedSuccessfully(21)  

rlDhcpClAutoConfigProtocol 1.3.6.1.4.1.9.6.1.101.76.22
Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
OBJECT-TYPE    
  INTEGER tftp(1), scp(2), auto(3)  

rlDhcpClAutoConfigScpFileExtention 1.3.6.1.4.1.9.6.1.101.76.23
Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
OBJECT-TYPE    
  DisplayString Size(0..128)  

rlDhcpClSelectedTftpServerInetAddressType 1.3.6.1.4.1.9.6.1.101.76.24
Currently selected TFTP server Inet Address type.
OBJECT-TYPE    
  InetAddressType  

rlDhcpClSelectedTftpServerInetAddress 1.3.6.1.4.1.9.6.1.101.76.25
Currently selected TFTP server inet Address.
OBJECT-TYPE    
  InetAddress  

rlDhcpClManualAutoConfigDataTable 1.3.6.1.4.1.9.6.1.101.76.26
A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClManualAutoConfigDataEntry

rlDhcpClManualAutoConfigDataEntry 1.3.6.1.4.1.9.6.1.101.76.26.1
An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
OBJECT-TYPE    
  RlDhcpClManualAutoConfigDataEntry  

rlDhcpClManualAutoConfigDataIndex 1.3.6.1.4.1.9.6.1.101.76.26.1.1
The index of this row. There is only one entry in this table, whose index is 1.
OBJECT-TYPE    
  INTEGER  

rlDhcpClManualServerInetAddressType 1.3.6.1.4.1.9.6.1.101.76.26.1.2
Manually configured inet Address type of remote server.
OBJECT-TYPE    
  InetAddressType  

rlDhcpClManualServerInetAddress 1.3.6.1.4.1.9.6.1.101.76.26.1.3
Manually configured inet Address of remote server.
OBJECT-TYPE    
  InetAddress  

rlDhcpClManualImageIndirectFileName 1.3.6.1.4.1.9.6.1.101.76.26.1.4
Manually configured indirect file name, that holds the name of the image file to download.
OBJECT-TYPE    
  DisplayString  

rlDhcpClInformationTable 1.3.6.1.4.1.9.6.1.101.76.27
The (conceptual) table mentione IP address which must be released/renewed on the interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClInformationEntry

rlDhcpClInformationEntry 1.3.6.1.4.1.9.6.1.101.76.27.1
An entry (conceptual row) in dhcpClActionTable.
OBJECT-TYPE    
  RlDhcpClInformationEntry  

rlDhcpClInformationIfIndex 1.3.6.1.4.1.9.6.1.101.76.27.1.1
The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpClInformationIpAddress 1.3.6.1.4.1.9.6.1.101.76.27.1.2
IP Address allocated by DHCP server.
OBJECT-TYPE    
  IpAddress  

rlDhcpClInformationIpMask 1.3.6.1.4.1.9.6.1.101.76.27.1.3
IP Address mask allocated by DHCP server.
OBJECT-TYPE    
  IpAddress  

rlDhcpClInformationT1 1.3.6.1.4.1.9.6.1.101.76.27.1.4
T1 timer value.
OBJECT-TYPE    
  Unsigned32  

rlDhcpClInformationT2 1.3.6.1.4.1.9.6.1.101.76.27.1.5
T2 timer value.
OBJECT-TYPE    
  Unsigned32  

rlDhcpClInformationDefaultGateway 1.3.6.1.4.1.9.6.1.101.76.27.1.6
Default Gateway IP Address.
OBJECT-TYPE    
  IpAddress  

rlDhcpClInformationHostName 1.3.6.1.4.1.9.6.1.101.76.27.1.7
Specifies the name of the client.
OBJECT-TYPE    
  SnmpAdminString Size(0..160)  

rlDhcpClInformationDomainName 1.3.6.1.4.1.9.6.1.101.76.27.1.8
The Domain name received by DHCP client.
OBJECT-TYPE    
  DisplayString Size(0..160)  

rlDhcpClInformationTftpServerName 1.3.6.1.4.1.9.6.1.101.76.27.1.9
The Tftp server name received by DHCP client.
OBJECT-TYPE    
  DisplayString Size(0..160)  

rlDhcpClInformationTftpFileName 1.3.6.1.4.1.9.6.1.101.76.27.1.10
Name of file to use in configuration process received by DHCP client.
OBJECT-TYPE    
  DisplayString Size(0..160)  

rlDhcpClInformationTimeZone 1.3.6.1.4.1.9.6.1.101.76.27.1.11
The timezone received by DHCP client.
OBJECT-TYPE    
  DisplayString Size(0..64)  

rlDhcpClInformationTftpImageName 1.3.6.1.4.1.9.6.1.101.76.27.1.12
Image filename to use in autoupdate process received by DHCP client.
OBJECT-TYPE    
  DisplayString Size(0..160)  

rlDhcpClInformationDnsServerListTable 1.3.6.1.4.1.9.6.1.101.76.28
The table saved the list of DNS servers received by DHCP client.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClInformationDnsServerListEntry

rlDhcpClInformationDnsServerListEntry 1.3.6.1.4.1.9.6.1.101.76.28.1
An entry in rlDhcpClInformationDnsServerListTable.
OBJECT-TYPE    
  RlDhcpClInformationDnsServerListEntry  

rlDhcpClInformationDnsServerListIfIndex 1.3.6.1.4.1.9.6.1.101.76.28.1.1
The IfIndex in rlDhcpClInformationDnsServerListEntry.
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpClInformationDnsServerListPriority 1.3.6.1.4.1.9.6.1.101.76.28.1.2
The priority of the entry.
OBJECT-TYPE    
  INTEGER  

rlDhcpClInformationDnsServerListAddress 1.3.6.1.4.1.9.6.1.101.76.28.1.3
DNS server address received by DHCP client
OBJECT-TYPE    
  IpAddress  

rlDhcpClInformationTftpServerListTable 1.3.6.1.4.1.9.6.1.101.76.29
The table saved the list of Tftp servers received by DHCP client.
OBJECT-TYPE    
  SEQUENCE OF  
    RlDhcpClInformationTftpServerListEntry

rlDhcpClInformationTftpServerListEntry 1.3.6.1.4.1.9.6.1.101.76.29.1
An entry in rlDhcpClInformationTftpServerListTable.
OBJECT-TYPE    
  RlDhcpClInformationTftpServerListEntry  

rlDhcpClInformationTftpServerListIfIndex 1.3.6.1.4.1.9.6.1.101.76.29.1.1
The IfIndex in rlDhcpClInformationTftpServerListEntry.
OBJECT-TYPE    
  InterfaceIndex  

rlDhcpClInformationTftpServerListPriority 1.3.6.1.4.1.9.6.1.101.76.29.1.2
The priority of the entry.
OBJECT-TYPE    
  INTEGER  

rlDhcpClInformationTftpServerListAddress 1.3.6.1.4.1.9.6.1.101.76.29.1.3
Tftp server address received by DHCP client
OBJECT-TYPE    
  IpAddress  

rlDhcpClAutoUpdateProtocol 1.3.6.1.4.1.9.6.1.101.76.30
Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
OBJECT-TYPE    
  INTEGER tftp(1), scp(2), auto(3)  

rlDhcpClAutoUpdateScpFileExtention 1.3.6.1.4.1.9.6.1.101.76.31
Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.
OBJECT-TYPE    
  DisplayString Size(0..128)